GDCDS1-MIB
135 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.2 | Nodecsu | |||
| 1.3.6.1.4.1.498.2.1 | TablecsuConfigTable | not-accessible | mandatory | The GDC csu Configuration Table. |
| 1.3.6.1.4.1.498.2.1.1 | RowcsuConfigEntry | not-accessible | mandatory | An entry in the GDC csu Configuration Table. |
| 1.3.6.1.4.1.498.2.1.1.1 | ColumncsuConfigLineIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.1.1.2 | ColumncsuOnesDensity | read-write | mandatory | This variable is used to indicate the pulse density on the network side. inhibit refers to no minimum pulse density csuMax15Zeros refers to a maximum of 15 con… |
| 1.3.6.1.4.1.498.2.1.1.3 | ColumncsuFrontPanel | read-write | mandatory | This variable is used to indicate whether the front panel switches are operational or not. inhibit refers to when the front panel switches are not operational.… |
| 1.3.6.1.4.1.498.2.1.1.4 | ColumncsuInbandLoop | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Detection. inhibit refers to when the in-band loopback codes are ignored. enable refers to when the … |
| 1.3.6.1.4.1.498.2.1.1.5 | ColumncsuILBFrame | read-write | mandatory | This variable is used to set the In-Band DS1 Loopback Code Framing option. unframed refers to the DSU transmitting unframed in-band loopback codes when a DS1 R… |
| 1.3.6.1.4.1.498.2.1.1.6 | ColumncsuLineBuildOutCtrl | read-write | mandatory | This variable is used to set the Network Line Build-Out control option for the network side. Man refers to manually setting the Network Line Build-Out to one o… |
| 1.3.6.1.4.1.498.2.1.1.7 | ColumncsuLineBuildOutValue | read-write | mandatory | This variable is used to set the Network Line Build-Out value on the network side. In manual mode, these values can be written and read back. In auto mode, a r… |
| 1.3.6.1.4.1.498.2.1.1.8 | ColumncsuLineTypeCtrl | read-write | mandatory | This variable is used to set the Line Type control. None refers to the unframed mode of the DC551. Man refers to manually setting the line type to one of the s… |
| 1.3.6.1.4.1.498.2.1.1.9 | ColumncsuAISLoopdown | read-write | mandatory | This variable is used to set the AIS Loop-Down option for remotely-initiated DS1 loopbacks. 4, inhibit, refers to when a continuous received AIS does not termi… |
| 1.3.6.1.4.1.498.2.1.1.10 | ColumncsuPreEqualizer | read-write | mandatory | This variable is used to set the Cascade PreEqualization option for matching the cascade port line length, providing transmitter pre-equalization for lengths o… |
| 1.3.6.1.4.1.498.2.1.1.11 | ColumncsuInitialize | write-only | mandatory | This variable is used to initialize specific items on the csu, csuAlarmHistory refers to initializing the Alarm History Report and a new start time is recorded… |
| 1.3.6.1.4.1.498.2.1.1.12 | ColumncsuTime | read-write | mandatory | This variable is used to set the time for the real-time clock located on the network element. The string is fixed at a length of 9 octets with the format of: h… |
| 1.3.6.1.4.1.498.2.1.1.13 | ColumncsuDate | read-write | mandatory | This variable is used to set the date for the real-time clock located on the network element. The string is fixed at a length of 8 octets with the format of: m… |
| 1.3.6.1.4.1.498.2.1.1.14 | ColumncsuTestType | read-write | mandatory | This variable is used to set the network side DS1 loop type. If csuLLB is set, a line loop is done when the proper inband loop pattern is detected. If csuTLB i… |
| 1.3.6.1.4.1.498.2.1.1.15 | ColumncsuReceiveLevel | read-only | mandatory | This variable is used to display the current receive level as reported by the Receive Level screen. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Receive Lev… |
| 1.3.6.1.4.1.498.2.2 | TablecsuChanConfigTable | not-accessible | mandatory | The GDC csu Channel Configuration Table. |
| 1.3.6.1.4.1.498.2.2.1 | RowcsuChanConfigEntry | not-accessible | mandatory | An entry in the GDC csu Channel Configuration Table. |
| 1.3.6.1.4.1.498.2.2.1.1 | ColumncsuChanConfigLineIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.2.1.2 | ColumncsuChanConfigNum | read-only | mandatory | This variable is used to link the Fractional Group from RFC1406 to its GDC configuration. It is linked by the FracIfIndex in the Fractional Group from RFC1406.… |
| 1.3.6.1.4.1.498.2.2.1.3 | ColumncsuStartDS0 | read-write | mandatory | This variable is used to set the Starting DS0 Number option for the selected channel to 0 to 24, defining where the selected bandwidth begins. The number of DS… |
| 1.3.6.1.4.1.498.2.2.1.4 | ColumncsuRTSCTS | read-write | mandatory | This variable is used to set the CTS operation option for the selected channel. csuCTSDelayed refers to CTS responding to RTS after a 10 ms delay. csuCTSForced… |
| 1.3.6.1.4.1.498.2.2.1.5 | ColumncsuControlModeIdle | read-write | mandatory | This variable is used to set the CMI Signalling option for the selected channel. off refers to when the CMI signalling is disabled. on refers to when the CMI s… |
| 1.3.6.1.4.1.498.2.2.1.6 | ColumncsuRDLInbandCode | read-write | mandatory | This variable is used to set the Remote Digital Loop Pattern option for the selected channel. csuFixed refers to a proprietary 7-bit loop-up/down in-band codes… |
| 1.3.6.1.4.1.498.2.2.1.7 | ColumncsuChanRate | read-write | mandatory | This variable is used to setup the channel rate used by the DSU to calculate the number of DS0s, or bandwidth, required for the channel. The rate depends on th… |
| 1.3.6.1.4.1.498.2.2.1.8 | ColumncsuAlternateDS0 | read-write | mandatory | This variable is used to set the Alternate DS0 option. off refers to channel data that is carried in consecutive blocks of DS0s and the full T1 bandwidth is av… |
| 1.3.6.1.4.1.498.2.2.1.9 | ColumncsuRespondRDL | read-write | mandatory | This variable is used to set the Channel RDL Response option. no refers to the channel ignores in-band loopback codes. yes refers to when the channel responds … |
| 1.3.6.1.4.1.498.2.2.1.10 | ColumncsuInbandDLTimeout | read-write | mandatory | This variable is used to set the Channel Digital Loop Timer option for remotely-initiated Channel Digital Loop tests. inhibit refers to when the test is unaffe… |
| 1.3.6.1.4.1.498.2.2.1.11 | ColumncsuChanStatus | read-only | mandatory | This variable is used to read the status of the channel. Each bit in the csuChanStatus indicates some status information. NoAlarm bit 1 Everything is ok Config… |
| 1.3.6.1.4.1.498.2.2.1.12 | ColumncsuChan6456 | read-write | mandatory | This value is used by the csu if the value of csuChanRate is a multiple of both 56 & 64. This value is not used if dsx1FracNumber is used to configure the csu.… |
| 1.3.6.1.4.1.498.2.3 | TablecsuIndicatorTable | not-accessible | mandatory | The GDC csu Indicator Table. |
| 1.3.6.1.4.1.498.2.3.1 | RowcsuIndicatorEntry | not-accessible | mandatory | An entry in the GDC Indicator Table. |
| 1.3.6.1.4.1.498.2.3.1.1 | ColumncsuIndicatorIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.3.1.2 | ColumncsuIndicatorOOF | read-only | mandatory | This object is the Network Out of Frame indicator. It indicates whether the CSU/DSU is or is not synchronized with network framing. In a CSU this is also known… |
| 1.3.6.1.4.1.498.2.3.1.3 | ColumncsuIndicatorNNS | read-only | mandatory | This object is the Network No Signal indicator. It indicates whether the CSU/DSU is or is not receiving a network signal. GDCPRODUCT STATUS BAR 551 NNS 551 (un… |
| 1.3.6.1.4.1.498.2.3.1.4 | ColumncsuIndicatorYEL | read-only | mandatory | This object is the Network Yellow Alarm receive indicator. It indicates whether the CSU/DSU is or is not receiving a network yellow alarm. GDCPRODUCT STATUS BA… |
| 1.3.6.1.4.1.498.2.3.1.5 | ColumncsuIndicatorAIS | read-only | mandatory | This object is the Network Alarm Indication Signal indicator. It indicates whether the CSU/DSU is or is not receiving AIS from the network. GDCPRODUCT STATUS B… |
| 1.3.6.1.4.1.498.2.3.1.6 | ColumncsuIndicatorNLB | read-only | mandatory | This object is the Network Loopback indicator. It indicates whether the CSU/DSU is or is not in a DS1 loopback test towards the network. GDCPRODUCT STATUS BAR … |
| 1.3.6.1.4.1.498.2.3.1.7 | ColumncsuIndicatorBPV | read-only | mandatory | This object is the Network BiPolar Violation indicator. It indicates whether the CSU/DSU has or has not received a BPV. GDCPRODUCT STATUS BAR 551 BPV 551 (unfr… |
| 1.3.6.1.4.1.498.2.3.1.8 | ColumncsuIndicatorCRC | read-only | mandatory | This object is the Network Cyclic Redundancy Check indicator. It indicates whether the CSU/DSU has or has not received a CRC error. GDCPRODUCT STATUS BAR 551 C… |
| 1.3.6.1.4.1.498.2.3.1.9 | ColumncsuIndicatorTSY | read-only | mandatory | This object is the Terminal Equipment Synchronization indicator. It indicates whether the CSU is or is not synchronized with equipment framing. GDCPRODUCT STAT… |
| 1.3.6.1.4.1.498.2.3.1.10 | ColumncsuIndicatorTNS | read-only | mandatory | This object is the Terminal No Signal indicator. It indicates whether the CSU is or is not receiving an equipment signal. GDCPRODUCT STATUS BAR 551 TNS 551 (un… |
| 1.3.6.1.4.1.498.2.3.1.11 | ColumncsuIndicatorOS | read-only | mandatory | This object is the Equipment Zero's indicator. It indicates whether the CSU is or is not receiving an excessive number of consecutive zero's (see one's density… |
| 1.3.6.1.4.1.498.2.3.1.12 | ColumncsuIndicatorLAD | read-only | mandatory | This object is the Low Average Density indicator. It indicates whether the CSU is or is not receiving an average pulse density less than that selected with the… |
| 1.3.6.1.4.1.498.2.3.1.13 | ColumncsuIndicatorCascadeOOF | read-only | mandatory | This object is the Cascade Out of Frame indicator. It indicates whether the T1 Cascade port is or is not synchronized with customer cascade equipment framing. … |
| 1.3.6.1.4.1.498.2.3.1.14 | ColumncsuIndicatorCascadeNS | read-only | mandatory | This object is the Cascade No Signal indicator. It indicates whether the T1 Cascade port is or is not receiving a customer cascade equipment signal. GDCPRODUCT… |
| 1.3.6.1.4.1.498.2.3.1.15 | ColumncsuIndicatorNetworkLT | read-only | mandatory | This object is the Local Test indicator. It indicates whether the DS1 local test is or is not active. GDCPRODUCT STATUS BAR 551 LT 551 (unframed) LT 552a LT 55… |
| 1.3.6.1.4.1.498.2.3.1.16 | ColumncsuIndicatorNetworkST | read-only | mandatory | This object is the Self Test indicator. It indicates whether the DS0 self test, DS1 self test or no self test is active. GDCPRODUCT STATUS BAR 551 ST 551 (unfr… |
| 1.3.6.1.4.1.498.2.3.1.17 | ColumncsuIndicatorNetworkRT | read-only | mandatory | This object is the DS1 Remote Test indicator. It indicates whether the DS1 remote test is or is not active. GDCPRODUCT STATUS BAR 551 RT 551 (unframed) RT 552a… |
| 1.3.6.1.4.1.498.2.3.1.18 | ColumncsuIndicatorChannelRDL | read-only | mandatory | This object is the channel Remote Digital Loopback indicator. It indicates whether the channel Remote Digital Loop is active on channel A, active on channel B … |
| 1.3.6.1.4.1.498.2.3.1.19 | ColumncsuIndicatorChannelST | read-only | mandatory | This object is the channel Self Test indicator. It indicates whether the channel Self Test is active on channel A, active on channel B or is not active. GDCPRO… |
| 1.3.6.1.4.1.498.2.3.1.20 | ColumncsuIndicatorChannelDL | read-only | mandatory | This object is the channel Digital Loopback indicator. It indicates whether the channel Digital Loop is active on channel A, active on channel B, active on bot… |
| 1.3.6.1.4.1.498.2.3.1.21 | ColumncsuIndicatorChannelLL | read-only | mandatory | This object is the channel Local Loopback indicator. It indicates whether the channel Local Loop is active on channel A, active on channel B or is not active. … |
| 1.3.6.1.4.1.498.2.3.1.22 | ColumncsuIndicatorMode | read-only | mandatory | This object is the unit mode indicator. It indicates whether the CSU/DSU is in hard (or LOR) mode where on board DIP switches are used or soft mode where progr… |
| 1.3.6.1.4.1.498.2.3.1.23 | ColumncsuIndicatorDS0LB | read-only | mandatory | This object is the DS) Loopback indicator. It indicates whether DS0 loopback at the local CSU is active or not. GDCPRODUCT STATUS BAR 551 DS0LB 551 (unframed) … |
| 1.3.6.1.4.1.498.2.4 | TablecsuSelftestDiagTable | not-accessible | mandatory | The GDC csu Selftest Diagnostic Table. |
| 1.3.6.1.4.1.498.2.4.1 | RowcsuSelftestDiagEntry | not-accessible | mandatory | An entry in the GDC csu Selftest Diagnostic Table. |
| 1.3.6.1.4.1.498.2.4.1.1 | ColumncsuSelftestDiagLineIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.4.1.2 | ColumncsuDiagSelftest | read-write | obsolete | This variable is used to indicate whether a selftest is currently on going. This will allow a Loopback to occur while a selftest is occurring. GDCPRODUCT EQUIV… |
| 1.3.6.1.4.1.498.2.4.1.3 | ColumncsuGDCSelftestPattern | read-write | mandatory | This variable is used in conjunction with the dsx1SendCode managed object in the RFC1406 Configuration Group. It selects the test pattern to be used in the BIT… |
| 1.3.6.1.4.1.498.2.4.1.4 | ColumncsuSelftestUserPattern | read-write | mandatory | This variable contains a user specified 16 bit pattern that will be sent during a selftest. The default pattern is 1100000000000000. GDCPRODUCT EQUIVALENT POSS… |
| 1.3.6.1.4.1.498.2.4.1.5 | ColumncsuSelftestFrame | read-write | mandatory | This variable is used to set whether the self test pattern is ESF/D4 framed or not. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 None 552a None 552a V1.1 No… |
| 1.3.6.1.4.1.498.2.4.1.6 | ColumncsuSelftestResults | read-only | mandatory | This variable is used to read the results of the selftest. BER Inactive is used to indicate that no selftest is running, otherwise the number of errors. GDCPRO… |
| 1.3.6.1.4.1.498.2.4.1.7 | ColumncsuSelftestTime | read-only | mandatory | This variable is used to read the active test time. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Test Time Same as defined in managed object 552a Test Time … |
| 1.3.6.1.4.1.498.2.5 | TablecsuLoopbackDiagTable | not-accessible | mandatory | The GDC csu Loopback Diagnostic Table. |
| 1.3.6.1.4.1.498.2.5.1 | RowcsuLoopbackDiagEntry | not-accessible | mandatory | An entry in the GDC csu Loopback Diagnostic Table. |
| 1.3.6.1.4.1.498.2.5.1.1 | ColumncsuLoopbackDiagLineIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.5.1.2 | ColumncsuGDCLoopback | read-write | mandatory | This variable is used to initiate a specific test. It is used in conjunction with the dsx1LoopbackConfig managed object in RFC1406 Configuration Group. Setting… |
| 1.3.6.1.4.1.498.2.6 | TablecsuDS0DiagTable | not-accessible | mandatory | The GDC csu DS0 Diagnostic Table. |
| 1.3.6.1.4.1.498.2.6.1 | RowcsuDS0DiagEntry | not-accessible | mandatory | An entry in the GDC csu DS0 Diagnostic Table. |
| 1.3.6.1.4.1.498.2.6.1.1 | ColumncsuDS0LineIndex | read-only | mandatory | This object is used to associate DS0s withe the appropriate DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the stand… |
| 1.3.6.1.4.1.498.2.6.1.2 | ColumncsuDS0Num | read-write | mandatory | This variable holds the DS0 number under test. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 DS0 Channel Number same as defined in managed object 552a DS0 Ch… |
| 1.3.6.1.4.1.498.2.6.1.3 | ColumncsuTestPattern | read-write | mandatory | This variable holds the test pattern the DS0 will use for testing. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Test Pattern 511, QRS and 2047 552a Test Pat… |
| 1.3.6.1.4.1.498.2.6.1.4 | ColumncsuResetResults | write-only | mandatory | This variable is used to reset the results from the previous test. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Reset Test Results same as defined in manage… |
| 1.3.6.1.4.1.498.2.6.1.5 | ColumncsuBERtest | read-write | mandatory | This variable is used to control the DS0 BER test. It controls a combination of 'M', Test Mode to BIT ERROR TEST and 'I', Initiate Test for on(2) and 'T', Term… |
| 1.3.6.1.4.1.498.2.6.1.6 | ColumncsuCumErrs | read-only | mandatory | This variable is used to read the cumulative errors counted during the test. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Cumulative Errors same as defined … |
| 1.3.6.1.4.1.498.2.6.1.7 | ColumncsuDataBlocks | read-only | mandatory | This variable is used to read the number of blocks tested. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Test Data Blocks same as defined in managed object 5… |
| 1.3.6.1.4.1.498.2.6.1.8 | ColumncsuCircuitDelayCtrl | write-only | mandatory | This variable is used to control the circuit delay test. It controls a combination of 'M', Test Mode to DELAY TEST and 'I', Initiate Test. A write of any value… |
| 1.3.6.1.4.1.498.2.6.1.9 | ColumncsuCircuitDelayResult | read-only | mandatory | This variable is used to read the circuit delay detected during the test. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Circuit Delay same as defined in mana… |
| 1.3.6.1.4.1.498.2.6.1.10 | ColumncsuLBtest | read-write | mandatory | This variable is used to control the DS0 LOOPBACK test. It controls a combination of 'M', Test Mode to LOOPBACK and 'I', Initiate Test for DS0LBon(2) and 'T', … |
| 1.3.6.1.4.1.498.2.7 | TablecsuChanDiagTable | not-accessible | mandatory | The GDC csu Channel Diagnostic Table. |
| 1.3.6.1.4.1.498.2.7.1 | RowcsuChanDiagEntry | not-accessible | mandatory | An entry in the GDC csu Channel Diagnostic Table. |
| 1.3.6.1.4.1.498.2.7.1.1 | ColumncsuChanLineIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.7.1.2 | ColumncsuChanNum | read-only | mandatory | This variable is used to link the Fractional Group from RFC1406 to its GDC configuration. It is linked by the FracIfIndex in the Fractional Group from RFC1406. |
| 1.3.6.1.4.1.498.2.7.1.3 | ColumncsuChanSelftest | read-write | mandatory | This variable is used start and stop the selftest on the channel. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Selftest same as defined in managed object 55… |
| 1.3.6.1.4.1.498.2.7.1.4 | ColumncsuChanLoopback | read-write | mandatory | This variable is used to initiate a channel test. NoLoop refers to when no test is currently being performed, it also is used to terminate a test. csuRDL refer… |
| 1.3.6.1.4.1.498.2.7.1.5 | ColumncsuChanSelftestStatus | read-only | mandatory | This variable is used to read the results of the selftest. The value will be OFF, Chx NO ERRORS or ChX ERRORS - Proceed to DS0 test GDCPRODUCT EQUIVALENT POSSI… |
| 1.3.6.1.4.1.498.2.8 | TablecsuAlarmHistoryTable | not-accessible | mandatory | The GDC csu Alarm History Table. |
| 1.3.6.1.4.1.498.2.8.1 | RowcsuAlarmHistoryEntry | not-accessible | mandatory | An entry in the GDC csu Alarm History Table. |
| 1.3.6.1.4.1.498.2.8.1.1 | ColumncsuAlarmHistoryIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.8.1.2 | ColumncsuAlarmType | read-only | mandatory | This variable is used to indicate the alarm that the count, first occurance and last occurance is associated with. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552… |
| 1.3.6.1.4.1.498.2.8.1.3 | ColumncsuAlarmHistoryStart | read-only | mandatory | This variable is used to hold when the alarm history was initialized. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Initialized Time and Date 552a Initialize… |
| 1.3.6.1.4.1.498.2.8.1.4 | ColumncsuCount | read-only | mandatory | This is used to indicate the number of recorded events of each of the listed errors, since the alarm history was initialized or cleared. GDCPRODUCT EQUIVALENT … |
| 1.3.6.1.4.1.498.2.8.1.5 | ColumncsuFirstOccur | read-only | mandatory | This variable is used to indicate when a specific alarm first occurred since last initialized. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 First Occurance … |
| 1.3.6.1.4.1.498.2.8.1.6 | ColumncsuLastOccur | read-only | mandatory | This variable is used to indicate when the last alarm occurred. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Last Occurance Time and Date 552a Last Occuranc… |
| 1.3.6.1.4.1.498.2.9 | TablecsuSchedPerfRprtTable | not-accessible | mandatory | The GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.9.1 | RowcsuSchedPerfRprtEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.9.1.1 | ColumncsuSchedPerfRprtIndex | read-only | mandatory | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the standard, RFC-1406. It should … |
| 1.3.6.1.4.1.498.2.9.1.2 | ColumncsuPerfRprtIntervalNumber | read-only | mandatory | A number between 1 and 4 denoting a 1 second interval. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Interval 1st, 2nd, 3rd, 4th 552a Interval 1st, 2nd, 3rd,… |
| 1.3.6.1.4.1.498.2.9.1.3 | ColumncsuPerfRprtMsg | read-write | mandatory | This variable is used to toggle between the Performance Report Message transmitted toward the network, outbound, and received from the network, inbound. GDCPRO… |
| 1.3.6.1.4.1.498.2.9.1.4 | ColumncsuCRCErrEvent | read-only | mandatory | This variable is used to indicate the CRC-6 Error Events. They are displayed in the ranges specified. RANGE DESCRIPTION SCREEN NoErrors no errors exist 0 OneEr… |
| 1.3.6.1.4.1.498.2.9.1.5 | ColumncsuSEEvent | read-only | mandatory | This variable is used to indicate Severe Error Events. RANGE DESCRIPTION SCREEN NoErrors 0 errors . OneOrMore 1 or more errors * GDCPRODUCT EQUIVALENT POSSIBLE… |
| 1.3.6.1.4.1.498.2.9.1.6 | ColumncsuFEEvent | read-only | mandatory | This variable is used to indicate a Frame Error Event. RANGE DESCRIPTION SCREEN NoErrors 0 errors . OneOrMore 1 or more errors * GDCPRODUCT EQUIVALENT POSSIBLE… |
| 1.3.6.1.4.1.498.2.9.1.7 | ColumncsuCVEvent | read-only | mandatory | This variable is used to indicate Code Violation Event. RANGE DESCRIPTION SCREEN NoErrors 0 errors . OneOrMore 1 or more errors * GDCPRODUCT EQUIVALENT POSSIBL… |
| 1.3.6.1.4.1.498.2.9.1.8 | ColumncsuCSEvent | read-only | mandatory | This variable is used to indicate Controlled Slip Event RANGE DESCRIPTION SCREEN NoErrors 0 errors . OneOrMore 1 or more errors * GDCPRODUCT EQUIVALENT POSSIBL… |
| 1.3.6.1.4.1.498.2.9.1.9 | ColumncsuAPLoop | read-only | mandatory | This variable is used to indicate Active Payload Loop condition occurred, this is the looping back toward the network frames consisting of the received 192 inf… |
| 1.3.6.1.4.1.498.2.10 | TablecsuCurrentStatsTable | not-accessible | mandatory | The GDC csu Current Statistics Table. |
| 1.3.6.1.4.1.498.2.10.1 | RowcsuCurrentStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.10.1.1 | ColumncsuCurrentIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.10.1.2 | ColumncsuCurrentLOFC | read-only | mandatory | The number of Loss of Frame Count encountered by a DS1 interface in the current 15 minute interval. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 None 552a N… |
| 1.3.6.1.4.1.498.2.11 | TablecsuIntervalStatsTable | not-accessible | mandatory | The GDC csu Interval Statistics Table. |
| 1.3.6.1.4.1.498.2.11.1 | RowcsuIntervalStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.11.1.1 | ColumncsuIntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.11.1.2 | ColumncsuIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute interval (assuming tht al… |
| 1.3.6.1.4.1.498.2.11.1.3 | ColumncsuIntervalLOFC | read-only | mandatory | The number of Loss of Frame Count encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. GDCPRODUCT EQUIVALENT POSSIBLESELE… |
| 1.3.6.1.4.1.498.2.12 | TablecsuTotalStatsTable | not-accessible | mandatory | The GDC csu Total Statistics Table. |
| 1.3.6.1.4.1.498.2.12.1 | RowcsuTotalStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.12.1.1 | ColumncsuTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.12.1.2 | ColumncsuTotalLOFC | read-only | mandatory | The number of Loss of Frame Count encountered by a DS1 interface in the previous 24 hour interval. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 None 552a No… |
| 1.3.6.1.4.1.498.2.13 | TablecsuFarEndCurrentStatsTable | not-accessible | mandatory | The GDC csu Current Statistics Table. |
| 1.3.6.1.4.1.498.2.13.1 | RowcsuFarEndCurrentStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.13.1.1 | ColumncsuFarEndCurrentIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.13.1.2 | ColumncsuFarEndCurrentLOFC | read-only | mandatory | The number of LOFC encountered by a DS1 interface in the current 15 minute interval. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 None 552a None 552a V1.1 L… |
| 1.3.6.1.4.1.498.2.14 | TablecsuFarEndIntervalStatsTable | not-accessible | mandatory | The GDC csu Interval Statistics Table. |
| 1.3.6.1.4.1.498.2.14.1 | RowcsuFarEndIntervalStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.14.1.1 | ColumncsuFarEndIntervalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.14.1.2 | ColumncsuFarEndIntervalNumber | read-only | mandatory | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute interval (assuming tht al… |
| 1.3.6.1.4.1.498.2.14.1.3 | ColumncsuFarEndIntervalLOFC | read-only | mandatory | The number of LOFC encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 N… |
| 1.3.6.1.4.1.498.2.15 | TablecsuFarEndTotalStatsTable | not-accessible | mandatory | The GDC csu Total Statistics Table. |
| 1.3.6.1.4.1.498.2.15.1 | RowcsuFarEndTotalStatsEntry | not-accessible | mandatory | An entry in the GDC csu Scheduled Performance Report Table. |
| 1.3.6.1.4.1.498.2.15.1.1 | ColumncsuFarEndTotalIndex | read-only | mandatory | The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.498.2.15.1.2 | ColumncsuFarEndTotalLOFC | read-only | mandatory | The number of LOFC encountered by a DS1 interface in the previous 24 hour interval. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 None 552a None 552a V1.1 LO… |