GDCMDM-MIB
196 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.4 | Nodemdm | |||
| 1.3.6.1.4.1.498.4.1 | NodemdmCallStatsTrap | This is the Call Statistics Trap. When a V.F 28.8 modem disconnects from a call after data has passed, it will send call statistics information. | ||
| 1.3.6.1.4.1.498.4.1 | TablemdmNetworkConfigTable | not-accessible | mandatory | The GDC VFAST modem network configuration table. |
| 1.3.6.1.4.1.498.4.1.1 | RowmdmNetworkEntry | not-accessible | mandatory | A listing of GDC VFAST modem network options. |
| 1.3.6.1.4.1.498.4.1.1.1 | ColumnmdmNetworkIndex | read-only | mandatory | A unique index for the Network Table. |
| 1.3.6.1.4.1.498.4.1.1.2 | ColumnmdmNetworkType | read-write | mandatory | Command to option the VF line type mode of operation. |
| 1.3.6.1.4.1.498.4.1.1.3 | ColumnmdmSNTxType | read-write | mandatory | Command used to select either Permissive or Programable Switched Network Transmit Level. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.1.1.4 | ColumnmdmSNTxLevel | read-write | mandatory | Command to select(force) the Switched Network Transmit Level when modem is optioned for adjustable. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.1.1.5 | ColumnmdmSNHandshakeMode | read-write | mandatory | Available handshake modes. This object is Country Code dependent. |
| 1.3.6.1.4.1.498.4.2 | TablemdmDTEConfigTable | not-accessible | mandatory | The GDC VFAST modem Data Terminal Equipment configuration table. |
| 1.3.6.1.4.1.498.4.2.1 | RowmdmDTEntry | not-accessible | mandatory | A listing of GDC VFAST modem DTE options. |
| 1.3.6.1.4.1.498.4.2.1.1 | ColumnmdmDTEIndex | read-only | mandatory | A unique index for the DTE Table. |
| 1.3.6.1.4.1.498.4.2.1.2 | ColumnmdmDTESpeed | read-write | mandatory | This option selects DTE bit Rate. |
| 1.3.6.1.4.1.498.4.2.1.3 | ColumnmdmCPMResp | read-write | mandatory | Selects the response rate of the Call Progress Monitor. |
| 1.3.6.1.4.1.498.4.2.1.4 | ColumnmdmCharLength | read-write | mandatory | DTE charater length and format options of the DTE asynchronous data. |
| 1.3.6.1.4.1.498.4.2.1.5 | ColumnmdmParity | read-write | mandatory | Parity of the async data when the character length option selects parity. |
| 1.3.6.1.4.1.498.4.2.1.6 | ColumnmdmOverspeed | read-write | mandatory | Option to set DTE async overspeed data tolerated by the modem. Extended = 2.5%. Nominal = 1.25%. |
| 1.3.6.1.4.1.498.4.2.1.7 | ColumnmdmFlowCntrl | read-write | mandatory | Options to set the modem DTE flow control. disable Disables all flow control. xonXoffSig Enables XON/XOFF signaling between modem and DTE. cts Enables the mode… |
| 1.3.6.1.4.1.498.4.2.1.8 | ColumnmdmTermEcho | read-write | mandatory | Option to control the modem echo to the DTE. |
| 1.3.6.1.4.1.498.4.2.1.9 | ColumnmdmDCDCntrl | read-write | mandatory | Option the EIA DCD mode of operation. ForceOn DCD always ON. Real DCD will follow CCITT specifications. ForceOnToggleDisc DCD is On but toggle on disconnect as… |
| 1.3.6.1.4.1.498.4.2.1.10 | ColumnmdmCTSCntrl | read-write | mandatory | Option the EIA CTS mode of operation. cmdOnDataRTS On during command mode, during data mode will follow RTS. cmdOnDataReal On during command mode, during data … |
| 1.3.6.1.4.1.498.4.2.1.11 | ColumnmdmDTRTrans | read-write | mandatory | Option the modem to respond to loss of DTR. forceon Modem ignore DTR transitions. offInCmdMode Upon transition detection modem will enter command mode. offDisc… |
| 1.3.6.1.4.1.498.4.2.1.12 | ColumnmdmDSRCntrl | read-write | mandatory | Option the EIA DSR mode of operation. onUntilDisc Selects DSR to remain On and glitch Off for disconnect. Normal Causes DSR to be real. followDCD Selects DSR t… |
| 1.3.6.1.4.1.498.4.2.1.13 | ColumnmdmDSRCntrlAL | read-write | mandatory | Option the EIA DSR operation during analoop. onAnaloop DSR will turn ON when in analoop offAnaloop DSR is forced Off when in Analoop. |
| 1.3.6.1.4.1.498.4.2.1.14 | ColumnmdmTXClockSource | read-write | mandatory | Selects the source for TX clock generation. internal The modem uses the internally generated clock source. external The modem uses the DTE clock as a source re… |
| 1.3.6.1.4.1.498.4.2.1.15 | ColumnmdmRTSCTSDelay | read-write | mandatory | Selects the delay time between RTS coming on and CTS being turned on (.001 sec). |
| 1.3.6.1.4.1.498.4.2.1.16 | ColumnmdmCarriageReturnCharacter | read-write | mandatory | Select the ascii character to be used as the carriage return. |
| 1.3.6.1.4.1.498.4.2.1.17 | ColumnmdmCharacterAbortDialing | read-write | mandatory | Enable/disable the option to abort dialing if a DTE character is detected. |
| 1.3.6.1.4.1.498.4.2.1.18 | ColumnmdmDelayDTR | read-write | mandatory | Selects the delay time(in Seconds) between making data mode and raising the DTR lead. It is dependent on the mode of operation. When configured for &M0 this re… |
| 1.3.6.1.4.1.498.4.2.1.19 | ColumnmdmEscapeCharacter | read-write | mandatory | Select the ascii character to be used as the 'escape to command mode' character. |
| 1.3.6.1.4.1.498.4.2.1.20 | ColumnmdmLineFeedCharacter | read-write | mandatory | Select the ascii character to be used as the Line Feed character. |
| 1.3.6.1.4.1.498.4.2.1.21 | ColumnmdmHangUpDelay | read-write | mandatory | Select the delay time(in Sec) between the modem detecting a command to hang up the line and the disconnect operation. |
| 1.3.6.1.4.1.498.4.2.1.22 | ColumnmdmEscapeCharacterGuardTime | read-write | mandatory | This is the timer the modem will use when determining a valid escape sequence. Select the delay time(in 1/50 Sec). When a valid escape sequence is detected the… |
| 1.3.6.1.4.1.498.4.2.1.23 | ColumnmdmOperatingMode | read-write | mandatory | Option to set the type of data transfer in data mode. asyncDataMode modem operates in async mode during command or data mode. async CmdsyncData In command mode… |
| 1.3.6.1.4.1.498.4.2.1.24 | ColumnmdmBackSpaceCharacter | read-write | mandatory | Select the ascii character to be used as the Back Space character. |
| 1.3.6.1.4.1.498.4.3 | TablemdmModemConfigTable | not-accessible | mandatory | The GDC VFAST modem configuration table. |
| 1.3.6.1.4.1.498.4.3.1 | RowmdmModemEntry | not-accessible | mandatory | A listing of GDC VFAST modem options. |
| 1.3.6.1.4.1.498.4.3.1.1 | ColumnmdmModemIndex | read-only | mandatory | A unique index for the Modem Option Table. |
| 1.3.6.1.4.1.498.4.3.1.2 | ColumnmdmRingsToAns | read-write | mandatory | Selects the number of rings received before the modem Auto Answer. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.3.1.3 | ColumnmdmFallFwrdBack | read-write | mandatory | Command the modem to enable/disable rate negotiation during a retrain. |
| 1.3.6.1.4.1.498.4.3.1.4 | ColumnmdmTrellis | read-write | mandatory | Enable/disable Trellis negotiation during a handshake. |
| 1.3.6.1.4.1.498.4.3.1.5 | ColumnmdmSQRetrain | read-write | mandatory | Command to option Signal Quality Retrains. |
| 1.3.6.1.4.1.498.4.3.1.6 | ColumnmdmLongSpaceDisc | read-write | mandatory | Command to enable/disable Long Space Disconnect. enable The modem will transmit 4 seconds of continuous space (BREAK) when ever a disconnect request is detecte… |
| 1.3.6.1.4.1.498.4.3.1.7 | ColumnmdmMakeBusy | read-write | mandatory | Command to option the switched network make busy function disable Does not make busy. onLossDTR Make busy on loss of DTR. inAL Make busy during analoop. inALor… |
| 1.3.6.1.4.1.498.4.3.1.8 | ColumnmdmRDLOptions | read-write | mandatory | Command to enable/disable Remote Digital Loopback Instigation. disable The modem ignores the inband request to initiate a remote digital loopback. enable The m… |
| 1.3.6.1.4.1.498.4.3.1.9 | ColumnmdmTestTimer | read-write | mandatory | Command to limit any diagnostic test in 10 second intervals. When the value is zero the test runs forever. |
| 1.3.6.1.4.1.498.4.3.1.10 | ColumnmdmDTETestCntrl | read-write | mandatory | Command to enable/disable diagnostic tests from DTE interface. |
| 1.3.6.1.4.1.498.4.3.1.11 | ColumnmdmDCDLossDisc | read-write | mandatory | Command to set the time (0.1sec) between loss of carrier detected and a modem disconnect. This object is Country Code dependent. |
| 1.3.6.1.4.1.498.4.3.1.12 | ColumnmdmCDRespTime | read-write | mandatory | Command to set the time (in Sec) a carrier signal must be present for the modem to recognize it. This object is Country Code dependent. |
| 1.3.6.1.4.1.498.4.3.1.13 | ColumnmdmAnswerOriginate | read-write | mandatory | Command to set the handshake band. answerIfRingDetect Upon detecting a ring the modem will handshake in the answer mode. forceAnswer The modem will be force to… |
| 1.3.6.1.4.1.498.4.3.1.14 | ColumnmdmWaitForDCD | read-write | mandatory | This object is used to store the carrier wait time. This is the time which the modem will wait after the dial has been completed until the modem senses carrier… |
| 1.3.6.1.4.1.498.4.4 | TablemdmDialerConfigTable | not-accessible | mandatory | The GDC VFAST dialer configuration table. |
| 1.3.6.1.4.1.498.4.4.1 | RowmdmDialerEntry | not-accessible | mandatory | A listing of GDC VFAST modem dialer options. |
| 1.3.6.1.4.1.498.4.4.1.1 | ColumnmdmDialerIndex | read-only | mandatory | A unique index for the Dialer Table. |
| 1.3.6.1.4.1.498.4.4.1.2 | ColumnmdmCPMMonitor | read-write | mandatory | Command used to option the Call Progress Monitor operation. This object is Country Code dependent. basic The modem will blind dial and will only send a CONNECT… |
| 1.3.6.1.4.1.498.4.4.1.3 | ColumnmdmParserSelection | read-write | mandatory | Command used to select the DTE parser. The following parsers are available: AT, v25async, v25HDLC, v25bisync, and no parser |
| 1.3.6.1.4.1.498.4.4.1.4 | ColumnmdmDTRDial | read-write | mandatory | This command sets the modem operation upon detecting an Off to On transition on DTR. disable Transition is ignored. cellNumber0 Dial number stored in cell 0. c… |
| 1.3.6.1.4.1.498.4.4.1.5 | ColumnmdmDialType | read-write | mandatory | This command selects the type of dial. Pulse or DTMF dial. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.4.1.6 | ColumnmdmResponseMode | read-write | mandatory | This Command controls when to send responses. enabled Requests the non-quiet mode, that is, to transmit result codes to the DTE as appropriate. disabled Reques… |
| 1.3.6.1.4.1.498.4.4.1.7 | ColumnmdmResponseType | read-write | mandatory | This command controls the type of responses. numeric modem responses are in numeric code. alpha modem responses are in alphabetical format. |
| 1.3.6.1.4.1.498.4.4.1.8 | ColumnmdmPauseTime | read-write | mandatory | This command selects the time for pause characters in the dial string. This object is Country Code dependent. |
| 1.3.6.1.4.1.498.4.4.1.9 | ColumnmdmWaitForDialtoneTime | read-write | mandatory | This command selects the time for the modem to be looking for dialtone before disconnecting. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.5 | TablemdmProtocolConfigTable | not-accessible | mandatory | The GDC VFAST modem Protocol configuration table. |
| 1.3.6.1.4.1.498.4.5.1 | RowmdmProtocolEntry | not-accessible | mandatory | A listing of GDC VFAST modem Protocol options. |
| 1.3.6.1.4.1.498.4.5.1.1 | ColumnmdmProtocolIndex | read-only | mandatory | A unique index for the DTE Table. |
| 1.3.6.1.4.1.498.4.5.1.2 | ColumnmdmCompression | read-write | mandatory | This command controls the Compression operation when operating in asynchronous mode. disabled No compression available. enabled Compression available in both d… |
| 1.3.6.1.4.1.498.4.5.1.3 | ColumnmdmAsyncProtocol | read-write | mandatory | This command controls the Protocols available at the handshake. wire Options the modem to run in wire mode; copying characters from VF port to the DTE port and… |
| 1.3.6.1.4.1.498.4.5.1.4 | ColumnmdmFlowControl | read-write | mandatory | This command controls the flow control type between the modem and the DTE available at the handshake. disabled Disables modem to modem flow control. enabled En… |
| 1.3.6.1.4.1.498.4.5.1.5 | ColumnmdmBreakHandling | read-write | mandatory | This command controls the operation of breaks. expediteDest This option will immediately transmit a break character for a fix time (300 msec) and destroy any c… |
| 1.3.6.1.4.1.498.4.5.1.6 | ColumnmdmConnAndLinkMessages | read-write | mandatory | This command controls when to send the protocol messages. separateMessages This options the modem to send the standard GDC conect message upon reaching data mo… |
| 1.3.6.1.4.1.498.4.5.1.7 | ColumnmdmErrorCorrection | read-write | mandatory | This command controls how the data is handled when running a protocol. noBuffer This option discards all data coming in from the modem until the receiver modem… |
| 1.3.6.1.4.1.498.4.5.1.8 | ColumnmdmV13Mode | read-write | mandatory | This command controls the V13 function. bidirectional Selects bidirectional V.13 simulated controlled carrier. txEnable Selects V.13 Tx side enabled. rxEnable … |
| 1.3.6.1.4.1.498.4.5.1.9 | ColumnmdmSyncProtocol | read-write | mandatory | This command controls the type of sync protocol. normalsync Selects normal synchronous mode. v13sync Selects synchronous V13 mode. |
| 1.3.6.1.4.1.498.4.5.1.10 | ColumnmdmFrameRetransLimit | read-write | mandatory | This command limits the number of times the modem will retransmit a frame while in an error correction connection. |
| 1.3.6.1.4.1.498.4.6 | TablemdmPrivateLineConfigTable | not-accessible | mandatory | The GDC VFAST modem Private Line configuration table. |
| 1.3.6.1.4.1.498.4.6.1 | RowmdmPrivateLineEntry | not-accessible | mandatory | A listing of GDC VFAST Private Line configurations options. |
| 1.3.6.1.4.1.498.4.6.1.1 | ColumnmdmPrivateLineIndex | read-only | mandatory | A unique index for the Private Line Configurations Table. |
| 1.3.6.1.4.1.498.4.6.1.2 | ColumnmdmPrivateLineTxLevel | read-write | mandatory | This command selects the transmit level during Private Line operation. This object is Country Code dependent |
| 1.3.6.1.4.1.498.4.6.1.3 | ColumnmdmPrivateLineHandshakeMode | read-write | mandatory | This command selects the Private Line Handshake modes |
| 1.3.6.1.4.1.498.4.6.1.4 | ColumnmdmAutoDialRestoral | read-write | mandatory | This command selects the options for Auto Dial Restoral when the modem is in private line mode. disabled No Auto Dial Restoral allowed. enableWithEndOfSession … |
| 1.3.6.1.4.1.498.4.6.1.5 | ColumnmdmPrivateLineDownTime | read-write | mandatory | This command selects for how long the Private Line must be lost before going to Dial Back Up mode |
| 1.3.6.1.4.1.498.4.6.1.6 | ColumnmdmDBUtoPLLookbackTime | read-write | mandatory | This command selects the time for how often the modem must lookback for Private Line restoral. The units are in 10 minutes. Valid range from 0 to 255. When the… |
| 1.3.6.1.4.1.498.4.7 | TablemdmAlarmScanTable | not-accessible | mandatory | The GDC VFAST alarm Scan Table. |
| 1.3.6.1.4.1.498.4.7.1 | RowmdmAlarmScanEntry | not-accessible | mandatory | An entry in the GDC VFAST alarm table. |
| 1.3.6.1.4.1.498.4.7.1.1 | ColumnmdmAlarmScanIndex | read-only | mandatory | This object is the identifier of the VFAST alarm table. |
| 1.3.6.1.4.1.498.4.7.1.2 | ColumnmdmAlarmScan | read-only | mandatory | Reads the alarm scan. There are 8 bytes. byte 1 bit 4 (bit 1.4) No DTR signal bit 2.0 No TXD Transitions bit 2.2 No RXD Transitions bit 2.3 Modem Fallback bit … |
| 1.3.6.1.4.1.498.4.7.1.3 | ColumnmdmResetSelfPowerBit | write-only | mandatory | This resets the modem power up alarm. |
| 1.3.6.1.4.1.498.4.8 | TablemdmMaskAlarmTable | not-accessible | mandatory | The GDC VFAST alarm Mask Table. |
| 1.3.6.1.4.1.498.4.8.1 | RowmdmMaskAlarmEntry | not-accessible | mandatory | An entry in the GDC VFAST alarm mask table. |
| 1.3.6.1.4.1.498.4.8.1.1 | ColumnmdmMaskAlarmIndex | read-only | mandatory | This object is the index of the VFAST alarm mask table. |
| 1.3.6.1.4.1.498.4.8.1.2 | ColumnmdmDTRLoss | read-write | mandatory | Mask for loss of DTR alarm. |
| 1.3.6.1.4.1.498.4.8.1.3 | ColumnmdmFallback | read-write | mandatory | Mask for fallback alarm. |
| 1.3.6.1.4.1.498.4.8.1.4 | ColumnmdmRxdTran | read-write | mandatory | Mask for Receive data transitions alarm. |
| 1.3.6.1.4.1.498.4.8.1.5 | ColumnmdmTxdTran | read-write | mandatory | Mask for transmit data transitions alarm. |
| 1.3.6.1.4.1.498.4.8.1.6 | ColumnmdmDCDLoss | read-write | mandatory | Mask for loss of DCD alarm. |
| 1.3.6.1.4.1.498.4.8.1.7 | ColumnmdmRingNoAnswer | read-write | mandatory | Mask for Rings no Answer alarm. |
| 1.3.6.1.4.1.498.4.8.1.8 | ColumnmdmRetrain | read-write | mandatory | Mask for Retrains count exceeded alarm. |
| 1.3.6.1.4.1.498.4.8.1.9 | ColumnmdmCallLength | read-write | mandatory | Mask for Call Length exceeded alarm. |
| 1.3.6.1.4.1.498.4.8.1.10 | ColumnmdmCallFail | read-write | mandatory | Mask for Call Failed alarm. |
| 1.3.6.1.4.1.498.4.8.1.11 | ColumnmdmConfigErr | read-write | mandatory | Mask for Configuration checksum error alarm. |
| 1.3.6.1.4.1.498.4.8.1.12 | ColumnmdmSignalQuality | read-write | mandatory | Mask for Poor Signal Quality alarm. |
| 1.3.6.1.4.1.498.4.8.1.13 | ColumnmdmOnDBU | read-write | mandatory | Mask for On Dial Backup alarm. |
| 1.3.6.1.4.1.498.4.8.1.14 | ColumnmdmRemoteConfigMask | read-write | mandatory | Mask for Remote Configuration. |
| 1.3.6.1.4.1.498.4.8.1.15 | ColumnmdmTestTimeout | read-write | mandatory | Mask for Test timeout. |
| 1.3.6.1.4.1.498.4.9 | TablemdmThresholdsTable | not-accessible | mandatory | The GDC VFAST Alarm Thresholds Table. |
| 1.3.6.1.4.1.498.4.9.1 | RowmdmThresholdsEntry | not-accessible | mandatory | An entry in the GDC VFAST Alarm Thresholds table. |
| 1.3.6.1.4.1.498.4.9.1.1 | ColumnmdmThresholdsIndex | read-only | mandatory | This object is the identifier of the Thresholds table. |
| 1.3.6.1.4.1.498.4.9.1.2 | ColumnmdmCallDuration | read-write | mandatory | This option selects the call duration threshold for alarm. |
| 1.3.6.1.4.1.498.4.9.1.3 | ColumnmdmRetrainThreshold | read-write | mandatory | This option selects the number of retrains threshold for alarm. |
| 1.3.6.1.4.1.498.4.10 | TablemdmStatusTable | not-accessible | mandatory | The GDC VFAST Status Table. |
| 1.3.6.1.4.1.498.4.10.1 | RowmdmStatusEntry | not-accessible | mandatory | An entry in the GDC VFAST Status table. |
| 1.3.6.1.4.1.498.4.10.1.1 | ColumnmdmStatusIndex | read-only | mandatory | This object is the identifier of the VFAST Status table. |
| 1.3.6.1.4.1.498.4.10.1.2 | ColumnmdmPLLookbackStatus | read-only | mandatory | Shows the status of Private Line lookback. |
| 1.3.6.1.4.1.498.4.10.1.3 | ColumnmdmAutoDialRestoralStatus | read-only | mandatory | Shows the status of Auto Dial Restoral. |
| 1.3.6.1.4.1.498.4.10.1.4 | ColumnmdmTXDtransitions | read-only | mandatory | EIA Status of TXD data transitions. |
| 1.3.6.1.4.1.498.4.10.1.5 | ColumnmdmRXDtransitions | read-only | mandatory | EIA Status of RXD data transitions. |
| 1.3.6.1.4.1.498.4.10.1.6 | ColumnmdmRTStransitions | read-only | mandatory | EIA Status of Request to Send transitions. |
| 1.3.6.1.4.1.498.4.10.1.7 | ColumnmdmDTRtransitions | read-only | mandatory | EIA Status of Data Terminal Ready transitions. |
| 1.3.6.1.4.1.498.4.10.1.8 | ColumnmdmDCDtransitions | read-only | mandatory | EIA Status of Carrier Detect transitions. |
| 1.3.6.1.4.1.498.4.10.1.9 | ColumnmdmTXCLKtransitions | read-only | mandatory | EIA Status Transmit Clock transitions. |
| 1.3.6.1.4.1.498.4.10.1.10 | ColumnmdmDTR | read-only | mandatory | EIA Status of Data Terminal Ready. |
| 1.3.6.1.4.1.498.4.10.1.11 | ColumnmdmCTS | read-only | mandatory | EIA Status of Clear to Send. |
| 1.3.6.1.4.1.498.4.10.1.12 | ColumnmdmDSR | read-only | mandatory | EIA Status of Data Set Ready. |
| 1.3.6.1.4.1.498.4.10.1.13 | ColumnmdmDCD | read-only | mandatory | EIA Status of Carrier Detect. |
| 1.3.6.1.4.1.498.4.10.1.14 | ColumnmdmSQM | read-only | mandatory | EIA Status of Signal Quality. |
| 1.3.6.1.4.1.498.4.10.1.15 | ColumnmdmRTS | read-only | mandatory | EIA Status of Request to Send. |
| 1.3.6.1.4.1.498.4.10.1.16 | ColumnmdmSwitchedPrivate | read-only | mandatory | Switched Network or Private Line configuration setting. |
| 1.3.6.1.4.1.498.4.11 | TablemdmControlTable | not-accessible | mandatory | The GDC VFAST Control Table. |
| 1.3.6.1.4.1.498.4.11.1 | RowmdmControlEntry | not-accessible | mandatory | An entry in the GDC VFAST Control table. |
| 1.3.6.1.4.1.498.4.11.1.1 | ColumnmdmControlIndex | read-only | mandatory | This object is the identifier of the VFAST Control table. |
| 1.3.6.1.4.1.498.4.11.1.2 | ColumnmdmSoftReset | write-only | mandatory | Forces a soft reset on the modem. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.11.1.3 | ColumnmdmFrontPanel | read-write | mandatory | This command controls the functionality of the front panel Switches. |
| 1.3.6.1.4.1.498.4.11.1.4 | ColumnmdmMakeClearBusy | read-write | mandatory | Command used to control the Offhook relay to make busy or clear the VF line. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.11.1.5 | ColumnmdmPLTalkData | write-only | mandatory | Object is used to force the modem to the idle or data state while configured for Private line. Idle, allows the modem to activate the private line option. Data… |
| 1.3.6.1.4.1.498.4.12 | TablemdmWhatAreYouTable | not-accessible | mandatory | The GDC VFAST What Are You Table. |
| 1.3.6.1.4.1.498.4.12.1 | RowmdmWhatAreYouEntry | not-accessible | mandatory | An entry in the GDC VFAST What Are You table. |
| 1.3.6.1.4.1.498.4.12.1.1 | ColumnmdmWhatAreYouIndex | read-only | mandatory | This object is the identifier of the VFAST What Are You table. |
| 1.3.6.1.4.1.498.4.12.1.2 | ColumnmdmVFCard | read-only | mandatory | This function returns the value the VF card attached to the modem. |
| 1.3.6.1.4.1.498.4.12.1.3 | ColumnmdmDTECard | read-only | mandatory | This function returns the type of DTE card attached to the modem. |
| 1.3.6.1.4.1.498.4.12.1.4 | ColumnmdmProductCode | read-only | mandatory | This identifies what type of device this is. |
| 1.3.6.1.4.1.498.4.12.1.5 | ColumnmdmCodeRev | read-only | mandatory | This function returns the firmware code level. example 01 - A- 02 - B- |
| 1.3.6.1.4.1.498.4.12.1.6 | ColumnmdmBootRev | read-only | mandatory | This function returns the boot firmware level. example 01 - A- 02 - B- |
| 1.3.6.1.4.1.498.4.12.1.7 | ColumnmdmCountryCode | read-only | mandatory | This function returns the country code number in three bytes. Each byte is the hex value of an decimal number. Example hex 30,30,31 is the country code of USA … |
| 1.3.6.1.4.1.498.4.13 | TablemdmDiagnosticTable | not-accessible | mandatory | The GDC VFAST diagnostics table. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.13.1 | RowmdmDiagnosticEntry | not-accessible | mandatory | A listing of GDC VFAST diagnostic tests |
| 1.3.6.1.4.1.498.4.13.1.1 | ColumnmdmDiagnosticIndex | read-only | mandatory | A unique index for the Diagnostic Table. |
| 1.3.6.1.4.1.498.4.13.1.2 | ColumnmdmDiagnosticTest | write-only | mandatory | This function selects the test. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.13.1.3 | ColumnmdmDiagnosticResults | read-only | mandatory | This function reads the test results in bit errors. |
| 1.3.6.1.4.1.498.4.13.1.4 | ColumnmdmDiagnosticStatus | read-only | mandatory | Diagnostic status of which test is running. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.13.1.5 | ColumnmdmTestStatus | read-only | mandatory | Test Status canNotBeDone - means test can not be done at this time terminated - means the test was terminated, could be terminated via the front panel timedout… |
| 1.3.6.1.4.1.498.4.13.1.6 | ColumnmdmTestDuration | read-only | mandatory | Time of modem in test, counted in timeticks. Not applicable when the modem is in Remote Configuration session. |
| 1.3.6.1.4.1.498.4.14 | TablemdmDialingFunctionTable | not-accessible | mandatory | The GDC VFAST modem dialing function table. |
| 1.3.6.1.4.1.498.4.14.1 | RowmdmDialingFunctionEntry | not-accessible | mandatory | A listing of GDC VFAST modem dialing function parameters. |
| 1.3.6.1.4.1.498.4.14.1.1 | ColumnmdmDialFunctionIndex | read-only | mandatory | A unique index for the Dialing Function Table. |
| 1.3.6.1.4.1.498.4.14.1.2 | ColumnmdmManualDial | write-only | mandatory | Command to instruct the modem to dial the following number, n. Not applicable when modem in remote configuration session. |
| 1.3.6.1.4.1.498.4.14.1.3 | ColumnmdmTerminateCall | write-only | mandatory | Command to instruct the mode to disconnect the call and go to idle. |
| 1.3.6.1.4.1.498.4.14.1.4 | ColumnmdmDialStatus | read-only | mandatory | Dial Status information 'inTest' means the modem is currently in a test mode. |
| 1.3.6.1.4.1.498.4.14.1.5 | ColumnmdmCallProgressStatus | read-only | mandatory | Call Progress Status |
| 1.3.6.1.4.1.498.4.15 | TablemdmDialingCellsFunctionTable | not-accessible | mandatory | The GDC VFAST modem dialing cells function table. |
| 1.3.6.1.4.1.498.4.15.1 | RowmdmDialingCellsFunctionEntry | not-accessible | mandatory | A listing of GDC VFAST modem dialing cells function parameters. |
| 1.3.6.1.4.1.498.4.15.1.1 | ColumnmdmDialCellFunctionIndex | read-only | mandatory | A unique index for the Dialing Function Table. Not applicable when modem in remote configuration session. |
| 1.3.6.1.4.1.498.4.15.1.2 | ColumnmdmCellNumber | read-only | mandatory | Command to instruct the modem to attempt dialing the phone number stored in Cell n. Not applicable when modem in remote configuration session. |
| 1.3.6.1.4.1.498.4.15.1.3 | ColumnmdmDial | write-only | mandatory | Command modem to dial. Not applicable when modem in remote configuration session. |
| 1.3.6.1.4.1.498.4.15.1.4 | ColumnmdmCellPhoneNumber | read-write | mandatory | Command to cause the modem to display the phone number stored in any of the 10 dial cell locations (0-9). |
| 1.3.6.1.4.1.498.4.15.1.5 | ColumnmdmTerminateCellCall | write-only | mandatory | Command to instruct the mode to disconnect the call and go to idle. |
| 1.3.6.1.4.1.498.4.16 | TablemdmMaintenanceTable | not-accessible | mandatory | The GDC VFAST Maintenance Table. |
| 1.3.6.1.4.1.498.4.16.1 | RowmdmMaintenanceEntry | not-accessible | mandatory | An entry in the GDC VFAST Maintenance table. |
| 1.3.6.1.4.1.498.4.16.1.1 | ColumnmdmMaintenanceIndex | read-only | mandatory | A unique index for the Maintenance Index Table. |
| 1.3.6.1.4.1.498.4.16.1.2 | ColumnmdmSaveRecallConfig | write-only | mandatory | This command allows the user to load or save factory or user profile configurations into the modem. |
| 1.3.6.1.4.1.498.4.16.1.3 | ColumnmdmConfigCksum | read-only | mandatory | Reads the configuration checksum of the modem. |
| 1.3.6.1.4.1.498.4.16.1.4 | ColumnmdmPassword | write-only | mandatory | This function sets the modem password. The maximum number of digits in the password must be equal or less than 10. If no password is entered the password is no… |
| 1.3.6.1.4.1.498.4.16.1.5 | ColumnmdmSerialNumber | read-write | mandatory | Network element serial number |
| 1.3.6.1.4.1.498.4.16.1.6 | ColumnmdmPowerUpProfile | read-write | mandatory | Command to select 1 of 4 custom modem configurations at power up. |
| 1.3.6.1.4.1.498.4.16.1.7 | ColumnmdmPasswordOperation | read-write | mandatory | This object identifies the Password Operation. The GDC proprietary handshake password validation operation and the on line (entered by the remote user) passwor… |
| 1.3.6.1.4.1.498.4.17 | TablemdmStatisticsTable | not-accessible | mandatory | The GDC VFAST Statistics Table. |
| 1.3.6.1.4.1.498.4.17.1 | RowmdmStatisticsEntry | not-accessible | mandatory | An entry in the GDC VFAST Statistics table. |
| 1.3.6.1.4.1.498.4.17.1.1 | ColumnmdmStatisticsIndex | read-only | mandatory | This object is the identifier of the VFAST Statistics table. |
| 1.3.6.1.4.1.498.4.17.1.2 | ColumnmdmDCERate | read-only | mandatory | This object identifies the DCE speed that the modem is operating. |
| 1.3.6.1.4.1.498.4.17.1.3 | ColumnmdmCallDurationStat | read-only | mandatory | This function reads the duration of the last or current Switched Network connection in timeticks. |
| 1.3.6.1.4.1.498.4.17.1.4 | ColumnmdmRetrainCount | read-only | mandatory | This function reads the number of retrains. |
| 1.3.6.1.4.1.498.4.17.1.5 | ColumnmdmFallbackCount | read-only | mandatory | This function reads the number of times that the modem falls back. |
| 1.3.6.1.4.1.498.4.17.1.6 | ColumnmdmFallforwardCount | read-only | mandatory | This function reads the number of times that the modem falls forward. |
| 1.3.6.1.4.1.498.4.17.1.7 | ColumnmdmRxSignalLevel | read-only | mandatory | This function reads the input signal level in dB. |
| 1.3.6.1.4.1.498.4.17.1.8 | ColumnmdmSignaltoNoiseRatio | read-only | mandatory | This function reads the signal to noise ratio in dB. |
| 1.3.6.1.4.1.498.4.17.1.9 | ColumnmdmAnswerOriginateStat | read-only | mandatory | This function reads the band that the modem is operating in data mode. |
| 1.3.6.1.4.1.498.4.17.1.10 | ColumnmdmDiscReason | read-only | mandatory | This function reads the reason why the modem has disconnected. usertimeout - user timed out while entering prompted information. |
| 1.3.6.1.4.1.498.4.17.1.11 | ColumnmdmCompressionEfficiency | read-only | mandatory | The number of bytes transferred into the compression encoder divided by the number of bytes transferred out of the encoder, multiplied by 100 for either the cu… |
| 1.3.6.1.4.1.498.4.17.1.12 | ColumnmdmThruput | read-only | mandatory | The data thruput rate is the number of bytes received from the DCE and then sent to the DTE per second. |
| 1.3.6.1.4.1.498.4.18 | TablemdmRemoteConfigTable | not-accessible | mandatory | The GDC VFAST Remote Configuration Table. |
| 1.3.6.1.4.1.498.4.18.1 | RowmdmRemoteConfigEntry | not-accessible | mandatory | An entry in the GDC VFAST Remote Config table. |
| 1.3.6.1.4.1.498.4.18.1.1 | ColumnmdmRemoteConfigIndex | read-only | mandatory | This object is the identifier of the VFAST Remote Configuration table. |
| 1.3.6.1.4.1.498.4.18.1.2 | ColumnmdmRemoteConfiguration | read-write | mandatory | This object options the Remote configuration for the local unit before dial. |
| 1.3.6.1.4.1.498.4.18.1.3 | ColumnmdmEndRemoteConfiguration | write-only | mandatory | This option tells the far end unit to disconnect and update the options or not that have been changed during the remote configuration session. |
| 1.3.6.1.4.1.498.4.18.1.4 | ColumnmdmPasswordRemoteConfiguration | write-only | mandatory | This option stores the Remote Configuration Password. When a password is stored in the answer modem it must be matched during the handshake by the originating … |
| 1.3.6.1.4.1.498.4.19 | ScalarmdmMIBVersion | read-only | mandatory | The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is… |