GDCMP7002-MIB
170 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.6 | Nodedsx1 | |||
| 1.3.6.1.4.1.498.6.6 | Nodemp7002System | |||
| 1.3.6.1.4.1.498.6.6.1 | Nodemp7002Version | |||
| 1.3.6.1.4.1.498.6.6.1.1 | Scalarmp7002MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.6.1.2 | Tablemp7002VersionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.498.6.6.1.2.1 | Rowmp7002VersionEntry | not-accessible | mandatory | An entry in the GDC Mp7002System Version Table. |
| 1.3.6.1.4.1.498.6.6.1.2.1.1 | Columnmp7002VersionIndex | read-only | mandatory | This object identifies Version parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.6.1.2.1.2 | Columnmp7002FirmwareRev | read-only | mandatory | |
| 1.3.6.1.4.1.498.6.6.1.2.1.3 | Columnmp7002ModelNumber | read-only | mandatory | This variable is used to determine the type of card family installed ex. MP7002. |
| 1.3.6.1.4.1.498.6.6.1.2.1.4 | Columnmp7002E1x | read-only | mandatory | Indicates if the E1X Cascade Interface is installed. |
| 1.3.6.1.4.1.498.6.6.2 | Nodemp7002Maintenance | |||
| 1.3.6.1.4.1.498.6.6.2.1 | Tablemp7002MaintenanceTable | not-accessible | mandatory | The table describes the maintenance objects for the unit and references the unit interface (cc = 00). |
| 1.3.6.1.4.1.498.6.6.2.1.1 | Rowmp7002MaintenanceEntry | not-accessible | mandatory | An entry in the GDC E1 Maintenance Table. |
| 1.3.6.1.4.1.498.6.6.2.1.1.1 | Columnmp7002MaintenanceLineIndex | read-only | mandatory | This object identifies Maintenance parameters associated with the managed object. |
| 1.3.6.1.4.1.498.6.6.2.1.1.2 | Columnmp7002SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type… |
| 1.3.6.1.4.1.498.6.6.2.1.1.3 | Columnmp7002SysUpTime | read-only | mandatory | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MI… |
| 1.3.6.1.4.1.498.6.6.2.1.1.4 | Columnmp7002DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(1) the unit will perform a r… |
| 1.3.6.1.4.1.498.6.6.2.1.1.5 | Columnmp7002ResetStats | read-write | mandatory | Supports the action of soft resetting the mp7002NearEndValidIntervals object. When this object is set to reset(2), then the unit will reset the mp7002NearEndVa… |
| 1.3.6.1.4.1.498.6.6.2.1.1.6 | Columnmp7002LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit 2 - NIU bit 1 - D_I bit 0… |
| 1.3.6.1.4.1.498.6.6.2.1.1.7 | Columnmp7002E1Circuit | read-write | mandatory | Circuit name E1 is connected to. |
| 1.3.6.1.4.1.498.6.6.2.1.1.8 | Columnmp7002E1XCircuit | read-write | mandatory | Circuit Name E1X is connected to |
| 1.3.6.1.4.1.498.6.6.2.1.1.9 | Columnmp7002TSBundle1Name | read-write | mandatory | Name first Time Slot Bundle is assigned to. Only used when unit is configured for drop side interface |
| 1.3.6.1.4.1.498.6.6.2.1.1.10 | Columnmp7002TSBundle2Name | read-write | mandatory | Name second Time Slot Bundle is assigned to. Only used when unit is configured for drop side interface. |
| 1.3.6.1.4.1.498.6.6.2.1.1.11 | Columnmp7002SetRealTime | read-write | mandatory | Number of seconds from midnight Dec 31, 1969. |
| 1.3.6.1.4.1.498.6.6.2.1.1.12 | Columnmp7002AlarmStatus | read-only | mandatory | Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NWTK_LOS bit 5 - NWTK_LOF bit 4 - NWTK_AIS bit 3 - NTWK_LCV bit 2 - TIMING LOSS bit 1 - NT… |
| 1.3.6.1.4.1.498.6.6.2.1.1.13 | Columnmp7002SystemTimingGenStatus | read-only | mandatory | Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz, or both. |
| 1.3.6.1.4.1.498.6.6.2.1.1.14 | Columnmp7002FarEndResetStats | read-write | mandatory | Supports the action of soft resetting the mp7002FarEndValidIntervals object. When this object is set to reset(2), then the unit will reset the mp7002FarEndVali… |
| 1.3.6.1.4.1.498.6.6.2.1.1.15 | Columnmp7002NearEndStatLastInitialized | read-only | mandatory | Number of seconds from midnight Dec 31, 1969 up until mp7002NearEndValidIntervals was last initialized to zero |
| 1.3.6.1.4.1.498.6.6.2.1.1.16 | Columnmp7002FarEndStatLastInitialized | read-only | mandatory | Number of seconds from midnight Dec 31, 1969 up until mp7002FarEndValidIntervals was last initialized to zero |
| 1.3.6.1.4.1.498.6.6.3 | Nodemp7002Configuration | |||
| 1.3.6.1.4.1.498.6.6.3.1 | Tablemp7002ConfigTable | not-accessible | mandatory | The GDC E1 Configuration table. |
| 1.3.6.1.4.1.498.6.6.3.1.1 | Rowmp7002ConfigEntry | not-accessible | mandatory | The GDC E1 Configuration table entry. |
| 1.3.6.1.4.1.498.6.6.3.1.1.1 | Columnmp7002ConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.3.1.1.2 | Columnmp7002InterfaceType | read-write | mandatory | The operating mode of the interface to be either Network Side, Drop Side or not assigned. |
| 1.3.6.1.4.1.498.6.6.3.1.1.3 | Columnmp7002RcvrRange | read-write | mandatory | Sets the receiver range to short (6dB) or long (36dB) |
| 1.3.6.1.4.1.498.6.6.3.1.1.4 | Columnmp7002TransmitClockSource | read-write | mandatory | Sets the transmit clock source. |
| 1.3.6.1.4.1.498.6.6.3.1.1.5 | Columnmp7002FallbackClockSource | read-write | mandatory | Identifies the fallback transmit clock source. |
| 1.3.6.1.4.1.498.6.6.3.1.1.6 | Columnmp7002FacilityDataLink | read-write | mandatory | |
| 1.3.6.1.4.1.498.6.6.3.1.1.7 | Columnmp7002NearEndValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in … |
| 1.3.6.1.4.1.498.6.6.3.1.1.8 | Columnmp7002FarEndValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in … |
| 1.3.6.1.4.1.498.6.6.3.1.1.9 | Columnmp7002NetworkConnection | read-write | mandatory | Sets whether the network interface is standby or online. This only applies to the Network Interface. |
| 1.3.6.1.4.1.498.6.6.3.1.1.10 | Columnmp7002Framing | read-write | mandatory | Set the framing for the interface. Abbreviations are as follows: CCS - common-channel signaling PCS0 - per channel signaling phase 0 PCS1 - per channel signali… |
| 1.3.6.1.4.1.498.6.6.3.1.1.11 | Columnmp7002LineCoding | read-write | mandatory | Sets the line coding for the interface. |
| 1.3.6.1.4.1.498.6.6.3.2 | Tablemp7002DCCConfigurationTable | not-accessible | mandatory | The GDC DCC Configuration table. These are Diagnostic Channel configuration options. |
| 1.3.6.1.4.1.498.6.6.3.2.1 | Rowmp7002DCCConfigurationEntry | not-accessible | mandatory | The GDC Diagnostic Configuration table entry. |
| 1.3.6.1.4.1.498.6.6.3.2.1.1 | Columnmp7002DCCConfigurationIndex | read-only | mandatory | Index value into the DCC Configuration table. |
| 1.3.6.1.4.1.498.6.6.3.2.1.2 | Columnmp7002TimeSlot | read-write | mandatory | Time Slot DCC goes in |
| 1.3.6.1.4.1.498.6.6.3.2.1.3 | Columnmp7002Bandwidth | read-write | mandatory | Bandwidth to use: 8 kbps - bit 7 only 56 kbps - bits 0 - 6 64 kbps - all 8 bits |
| 1.3.6.1.4.1.498.6.6.4 | Nodemp7002Diagnostics | |||
| 1.3.6.1.4.1.498.6.6.4.1 | Tablemp7002DiagTable | not-accessible | mandatory | The GDC E1 Diagnostics table. Information in the entries of this table support diagnostics testing via loopbacks. Diagnostics are only supported when mp7002Int… |
| 1.3.6.1.4.1.498.6.6.4.1.1 | Rowmp7002DiagEntry | not-accessible | mandatory | The GDC E1 Diagnostics table entry. |
| 1.3.6.1.4.1.498.6.6.4.1.1.1 | Columnmp7002DiagIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.4.1.1.2 | Columnmp7002TestPattern | read-write | obsolete | Test pattern for tests that use the pattern generator. The value of this object is used when mp7002DiagConfig.unitTest(5) or mp7002DiagConfig.patGenOn(6) is se… |
| 1.3.6.1.4.1.498.6.6.4.1.1.3 | Columnmp7002DiagConfig | read-write | mandatory | Selects the test to run. noLoop(1) ends the test. Interoperates with mp7002TestPattern. When unitTest(2) or patGenOn(3) is selected, the pattern in mp7002TestP… |
| 1.3.6.1.4.1.498.6.6.4.1.1.4 | Columnmp7002TestLimit | read-write | mandatory | Selects the duration to run a diagnostic test. The value(1) noLimit signifies that the test should run indefinitely until explicitly terminated. Default value:… |
| 1.3.6.1.4.1.498.6.6.4.1.1.5 | Columnmp7002TestExecutionStatus | read-only | mandatory | This variable reports the status of a test. notInTest(1) indicates a test is not running. testInProgress(2) indicates that a test is currently running. testCom… |
| 1.3.6.1.4.1.498.6.6.4.1.1.6 | Columnmp7002TestExceptions | read-only | mandatory | Indicates exceptions that have occurred that may affect interpretation of the test results. The value of this object is a sum. This sum initially take the valu… |
| 1.3.6.1.4.1.498.6.6.4.1.1.7 | Columnmp7002TestResults | read-only | obsolete | The results of the last diagnostic test. This can be the current test running or the last completed test. Note that the interpretation of these results may be … |
| 1.3.6.1.4.1.498.6.6.4.1.1.8 | Columnmp7002ResetTestResults | read-write | obsolete | Resets the diagnostic error count. Not supported by MP7002 since no pattern generating tests are supported. |
| 1.3.6.1.4.1.498.6.6.5 | Nodemp7002Performance | |||
| 1.3.6.1.4.1.498.6.6.5.1 | Tablemp7002NearEndCurrent15MinTable | not-accessible | mandatory | The mp7002 Current table. |
| 1.3.6.1.4.1.498.6.6.5.1.1 | Rowmp7002NearEndCurrent15MinEntry | not-accessible | mandatory | An entry in the mp7002 NearEnd Current table. |
| 1.3.6.1.4.1.498.6.6.5.1.1.1 | Columnmp7002NearEndCurrent15MinIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.1.1.2 | Columnmp7002NearEndCurrent15MinStat | read-only | mandatory | Returns a bitwise snapshot of the current 15Min statistics. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 … |
| 1.3.6.1.4.1.498.6.6.5.2 | Tablemp7002NearEndIntervalTable | not-accessible | mandatory | The mp7002 Interval table. |
| 1.3.6.1.4.1.498.6.6.5.2.1 | Rowmp7002NearEndIntervalEntry | not-accessible | mandatory | An entry in the E1 Interval table. |
| 1.3.6.1.4.1.498.6.6.5.2.1.1 | Columnmp7002NearEndIntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.2.1.2 | Columnmp7002NearEndIntervalNumber | read-only | mandatory | The number of Errored Seconds encountered by an E1 interface in one of the previous 16, individual 15 minute, intervals. |
| 1.3.6.1.4.1.498.6.6.5.2.1.3 | Columnmp7002NearEndIntervalStat | read-only | mandatory | Returns a bitwise map of the interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7… |
| 1.3.6.1.4.1.498.6.6.5.3 | Tablemp7002NearEndCurrent24HrTable | not-accessible | mandatory | The E1 Current24Hr table. 4 hour interval. |
| 1.3.6.1.4.1.498.6.6.5.3.1 | Rowmp7002NearEndCurrent24HrEntry | not-accessible | mandatory | An entry in the E1 Total table. |
| 1.3.6.1.4.1.498.6.6.5.3.1.1 | Columnmp7002NearEndCurrent24HrIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.3.1.2 | Columnmp7002NearEndCurrent24HrStat | read-only | mandatory | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^… |
| 1.3.6.1.4.1.498.6.6.5.4 | Tablemp7002NearEndRecent24HrTable | not-accessible | mandatory | The E1 Recent24Hr table. 4 hour interval. |
| 1.3.6.1.4.1.498.6.6.5.4.1 | Rowmp7002NearEndRecent24HrEntry | not-accessible | mandatory | An entry in the E1 Total table. |
| 1.3.6.1.4.1.498.6.6.5.4.1.1 | Columnmp7002NearEndRecent24HrIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.4.1.2 | Columnmp7002NearEndRecent24HrStat | read-only | mandatory | Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^… |
| 1.3.6.1.4.1.498.6.6.5.5 | Tablemp7002FarEndCurrent15MinTable | not-accessible | mandatory | The mp7002FarEnd Current 15 minute table. |
| 1.3.6.1.4.1.498.6.6.5.5.1 | Rowmp7002FarEndCurrent15MinEntry | not-accessible | mandatory | An entry in the mp7002FarEnd Current 15 Minute table. |
| 1.3.6.1.4.1.498.6.6.5.5.1.1 | Columnmp7002FarEndCurrent15MinIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.5.1.2 | Columnmp7002FarEndCurrent15MinStat | read-only | mandatory | Returns a bitwise map of the far end interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES .… |
| 1.3.6.1.4.1.498.6.6.5.6 | Tablemp7002FarEndIntervalTable | not-accessible | mandatory | The mp7002FarEnd Interval table. |
| 1.3.6.1.4.1.498.6.6.5.6.1 | Rowmp7002FarEndIntervalEntry | not-accessible | mandatory | An entry in the Interval table. |
| 1.3.6.1.4.1.498.6.6.5.6.1.1 | Columnmp7002FarEndIntervalIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.6.1.2 | Columnmp7002FarEndIntervalNumber | read-only | mandatory | A number between 1 and 16, where 1 is the most recently completed 15 minute interval and 16 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.498.6.6.5.6.1.3 | Columnmp7002FarEndIntervalStat | read-only | mandatory | Returns a bitwise map of statistics for the far end interface in the current 15 minute interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2… |
| 1.3.6.1.4.1.498.6.6.5.7 | Tablemp7002CurrentFarEnd24HrTable | not-accessible | mandatory | The Current 24 Hour table. |
| 1.3.6.1.4.1.498.6.6.5.7.1 | Rowmp7002CurrentFarEnd24HrEntry | not-accessible | mandatory | An entry in the Current 24 Hr table. |
| 1.3.6.1.4.1.498.6.6.5.7.1.1 | Columnmp7002CurrentFarEnd24HrIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.7.1.2 | Columnmp7002CurrentFarEnd24HrStat | read-only | mandatory | Returns a bitwise map of statistics for the interface in the current 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535)… |
| 1.3.6.1.4.1.498.6.6.5.8 | Tablemp7002RecentFarEnd24HrTable | not-accessible | mandatory | The Recent 24 Hour table. |
| 1.3.6.1.4.1.498.6.6.5.8.1 | Rowmp7002RecentFarEnd24HrEntry | not-accessible | mandatory | An entry in the Recent 24 Hr table. |
| 1.3.6.1.4.1.498.6.6.5.8.1.1 | Columnmp7002RecentFarEnd24HrIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.8.1.2 | Columnmp7002RecentFarEnd24HrStat | read-only | mandatory | Returns a bitwise map of statistics for the interface in the Recent 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) … |
| 1.3.6.1.4.1.498.6.6.5.9 | Tablemp7002UnavailableTimeRegTable | not-accessible | mandatory | The mp7002 Near End Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.6.5.9.1 | Rowmp7002UnavailableTimeRegEntry | not-accessible | mandatory | An entry in the Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.6.5.9.1.1 | Columnmp7002UnavailableTimeRegIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.9.1.2 | Columnmp7002UnavailableTimeRegNumber | read-only | mandatory | A number between 1 and 6, where the number is the number of the Unavailable Time Register. |
| 1.3.6.1.4.1.498.6.6.5.9.1.3 | Columnmp7002UnavailableTimeRegStart | read-only | mandatory | Start time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.6.5.9.1.4 | Columnmp7002UnavailableTimeRegStop | read-only | mandatory | Stop time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.6.5.10 | Tablemp7002FarEndUnavailableTimeRegTable | not-accessible | mandatory | The mp7002 Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.6.5.10.1 | Rowmp7002FarEndUnavailableTimeRegEntry | not-accessible | mandatory | An entry in the Unavailable Time Register table. |
| 1.3.6.1.4.1.498.6.6.5.10.1.1 | Columnmp7002FarEndUnavailableTimeRegIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop… |
| 1.3.6.1.4.1.498.6.6.5.10.1.2 | Columnmp7002FarEndUnavailableTimeRegNumber | read-only | mandatory | A number between 1 and 6, where the number is the number of the Unavailable Time Register. |
| 1.3.6.1.4.1.498.6.6.5.10.1.3 | Columnmp7002FarEndUnavailableTimeRegStart | read-only | mandatory | Start time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.6.5.10.1.4 | Columnmp7002FarEndUnavailableTimeRegStop | read-only | mandatory | Stop time of one of the Unavailable Time Registers. |
| 1.3.6.1.4.1.498.6.6.7 | Nodemp7002SysConfig | |||
| 1.3.6.1.4.1.498.6.6.7.1 | Tablemp7002SysTimingTable | not-accessible | mandatory | The GDC System Timing table. These are unit options at the system level. |
| 1.3.6.1.4.1.498.6.6.7.1.1 | Rowmp7002SysTimingEntry | not-accessible | mandatory | The GDC E1 Configuration table entry. |
| 1.3.6.1.4.1.498.6.6.7.1.1.1 | Columnmp7002SysTimingIndex | read-only | mandatory | Index value into the system configuration table. |
| 1.3.6.1.4.1.498.6.6.7.1.1.2 | Columnmp7002SysTimingGen | read-write | mandatory | Selects if the unit provides system timing. none(1) - does not provide Timing Generator primary(2) - unit is primary Timing Generator for the shelf. secondary(… |
| 1.3.6.1.4.1.498.6.6.7.2 | Tablemp7002HighwayAssignTable | not-accessible | mandatory | The GDC System Configuration table. These are unit options at the system level. |
| 1.3.6.1.4.1.498.6.6.7.2.1 | Rowmp7002HighwayAssignEntry | not-accessible | mandatory | The GDC E1 Highway Assign table entry. |
| 1.3.6.1.4.1.498.6.6.7.2.1.1 | Columnmp7002HighwayAssignIndex | read-only | mandatory | Index value into the Highway Assignment table. |
| 1.3.6.1.4.1.498.6.6.7.2.1.2 | Columnmp7002TimeSlotBundle | read-only | mandatory | Index for the bundle being assigned. A time slot bundle can be assigned to 1 or 2 of the 4 backplane highways. Bundle 1 is asigned in the Aggregate starting at… |
| 1.3.6.1.4.1.498.6.6.7.2.1.3 | Columnmp7002StartTimeSlot | read-write | mandatory | Starting time slot of the bundle. If only 1 bundle is being assigned, or the first of 2 is being assigned, it must start at 1. The second of 2 must start at th… |
| 1.3.6.1.4.1.498.6.6.7.2.1.4 | Columnmp7002NumberOfTimeSlots | read-write | mandatory | Number of time slots assigned to the bundle. |
| 1.3.6.1.4.1.498.6.6.7.2.1.5 | Columnmp7002BundleDestination | read-write | mandatory | Defines the destination of the bundle. |
| 1.3.6.1.4.1.498.6.6.7.2.1.6 | Columnmp7002ExecuteAssign | read-write | mandatory | Causes the MP7002 to execute configuration of the assigned highway configuration. This object should be sent in a separate PDU after acknowlegement of the assi… |
| 1.3.6.1.4.1.498.6.9 | Nodemp7002Alarms | |||
| 1.3.6.1.4.1.498.6.9.1 | Nodemp7002AlarmData | |||
| 1.3.6.1.4.1.498.6.9.1.1 | Nodemp7002NoResponseAlm | |||
| 1.3.6.1.4.1.498.6.9.1.2 | Nodemp7002DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.9.1.3 | Nodemp7002PowerUpAlm | |||
| 1.3.6.1.4.1.498.6.9.1.4 | Nodemp7002NvRamCorrupt | |||
| 1.3.6.1.4.1.498.6.9.1.5 | Nodemp7002UnitFailure | |||
| 1.3.6.1.4.1.498.6.9.1.6 | Nodemp7002TimingLoss | |||
| 1.3.6.1.4.1.498.6.9.1.7 | Nodemp7002LCV | |||
| 1.3.6.1.4.1.498.6.9.1.8 | Nodemp7002LossOfSignal | |||
| 1.3.6.1.4.1.498.6.9.1.9 | Nodemp7002LossOfFrame | |||
| 1.3.6.1.4.1.498.6.9.1.10 | Nodemp7002AlarmIndSignal | |||
| 1.3.6.1.4.1.498.6.9.1.11 | Nodemp7002NEES | |||
| 1.3.6.1.4.1.498.6.9.1.12 | Nodemp7002NEBBE | |||
| 1.3.6.1.4.1.498.6.9.1.13 | Nodemp7002NESES | |||
| 1.3.6.1.4.1.498.6.9.1.14 | Nodemp7002NEUAS | |||
| 1.3.6.1.4.1.498.6.9.1.15 | Nodemp7002FEES | |||
| 1.3.6.1.4.1.498.6.9.1.16 | Nodemp7002FEBBE | |||
| 1.3.6.1.4.1.498.6.9.1.17 | Nodemp7002FESES | |||
| 1.3.6.1.4.1.498.6.9.1.18 | Nodemp7002FEUAS | |||
| 1.3.6.1.4.1.498.6.9.1.19 | Nodemp7002RAI | |||
| 1.3.6.1.4.1.498.6.9.2 | Tablemp7002NearEndAlarmConfigTable | not-accessible | mandatory | The mp7002NearEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on … |
| 1.3.6.1.4.1.498.6.9.2.1 | Rowmp7002NearEndAlarmConfigEntry | not-accessible | mandatory | An entry in the MP7002 Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.9.2.1.1 | Columnmp7002NearEndAlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.9.2.1.2 | Columnmp7002NearEndAlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.9.2.1.3 | Columnmp7002NearEndAlarmCountWindow | read-write | mandatory | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Defa… |
| 1.3.6.1.4.1.498.6.9.2.1.4 | Columnmp7002NearEndAlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.6.9.3 | Tablemp7002FarEndAlarmConfigTable | not-accessible | mandatory | The mp7002FarEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a… |
| 1.3.6.1.4.1.498.6.9.3.1 | Rowmp7002FarEndAlarmConfigEntry | not-accessible | mandatory | An entry in the MP7002 Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.9.3.1.1 | Columnmp7002FarEndAlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.9.3.1.2 | Columnmp7002FarEndAlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.9.3.1.3 | Columnmp7002FarEndAlarmCountWindow | read-write | mandatory | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Defa… |
| 1.3.6.1.4.1.498.6.9.3.1.4 | Columnmp7002FarEndAlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.6.9.4 | Tablemp7002LocalAlarmConfigTable | not-accessible | mandatory | The mp7002LocalAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a … |
| 1.3.6.1.4.1.498.6.9.4.1 | Rowmp7002LocalAlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Local Alarm Configuration table. |
| 1.3.6.1.4.1.498.6.9.4.1.1 | Columnmp7002LocalAlarmConfigIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.9.4.1.2 | Columnmp7002UASNE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.3 | Columnmp7002SESNE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.4 | Columnmp7002BBENE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.5 | Columnmp7002ESNE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.6 | Columnmp7002UASFE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.7 | Columnmp7002SESFE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.8 | Columnmp7002BBEFE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.9 | Columnmp7002ESFE | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.10 | Columnmp7002LOS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.11 | Columnmp7002LOF | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.12 | Columnmp7002AIS | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.13 | Columnmp7002TmgLoss | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.14 | Columnmp7002LCVs | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |
| 1.3.6.1.4.1.498.6.9.4.1.15 | Columnmp7002NtwkRAI | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor buss. |