GDCUAS7624-MIB
111 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498 | Nodegdc | |||
| 1.3.6.1.4.1.498.18 | Nodeniudiu | |||
| 1.3.6.1.4.1.498.18.1 | Nodeuas7624System | |||
| 1.3.6.1.4.1.498.18.1.1 | Nodeuas7624Version | |||
| 1.3.6.1.4.1.498.18.1.1.1 | Scalaruas7624MIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.18.1.1.2 | Tableuas7624VersionTable | not-accessible | mandatory | The 7624 version table |
| 1.3.6.1.4.1.498.18.1.1.2.1 | Rowuas7624VersionEntry | not-accessible | mandatory | An entry in the GDC uas7624System Version Table. |
| 1.3.6.1.4.1.498.18.1.1.2.1.1 | Columnuas7624VersionIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For entire table: SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.1.2.1.2 | Columnuas7624FirmwareRev | read-only | mandatory | |
| 1.3.6.1.4.1.498.18.1.1.2.1.3 | Columnuas7624CardType | read-only | mandatory | This variable is used to determine the type of card family installed ex. uas7624. |
| 1.3.6.1.4.1.498.18.1.1.2.1.4 | Columnuas7624BootRev | read-only | mandatory | |
| 1.3.6.1.4.1.498.18.1.2 | Nodeuas7624Maintenance | |||
| 1.3.6.1.4.1.498.18.1.2.1 | Tableuas7624MaintenanceTable | not-accessible | mandatory | The table describes the maintenance objects for uas7624. |
| 1.3.6.1.4.1.498.18.1.2.1.1 | Rowuas7624MaintenanceEntry | not-accessible | mandatory | An entry in the GDC 7624 Maintenance Table. |
| 1.3.6.1.4.1.498.18.1.2.1.1.1 | Columnuas7624MaintenanceLineIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. See DESCRIPTION's below for ranges. |
| 1.3.6.1.4.1.498.18.1.2.1.1.2 | Columnuas7624SoftReset | read-write | mandatory | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type… |
| 1.3.6.1.4.1.498.18.1.2.1.1.3 | Columnuas7624DefaultInit | read-write | mandatory | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(2) the unit will perform a r… |
| 1.3.6.1.4.1.498.18.1.2.1.1.4 | Columnuas7624ResetMajorAlarm | read-write | mandatory | This variable is used. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.2.1.1.5 | Columnuas7624ResetMinorAlarm | read-write | mandatory | This variable is used. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.2.1.1.6 | Columnuas7624ResetStatistics | read-write | mandatory | This variable is used to reset the performance intervals. When it is set to reset, the performance tables and uas7624Valid intervals are reset to zero. The val… |
| 1.3.6.1.4.1.498.18.1.2.1.1.7 | Columnuas7624StatLastInitialized | read-only | mandatory | The elapsed time since the statistics were last initialized. This will be zero'd when uas7624ResetStatistics is reset(2). SCinstance: [L]ine=1-4 [i]nterface=1-… |
| 1.3.6.1.4.1.498.18.1.2.1.1.8 | Columnuas7624ValidIntervals | read-only | mandatory | The number of previous intervals for which valid data was collected. The value will be 96 for the T1 interface and 16 for the loop interface unless the interfa… |
| 1.3.6.1.4.1.498.18.1.2.1.1.9 | Columnuas7624SysUpTime | read-only | mandatory | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MI… |
| 1.3.6.1.4.1.498.18.1.2.1.1.10 | Columnuas7624LedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. based on the Line: For SCinstance: [L]ine=1-4 [i]nterface=0 key 01 = SOLID GREEN Good Condition and in… |
| 1.3.6.1.4.1.498.18.1.2.1.1.11 | Columnuas7624AlarmStatus | read-only | mandatory | Returns a bit-wise Status of alarms with both masked and unmasked. For SCinstance: [L]ine=1-4 [i]nterface=0 1.7 - f/u 1.6 - Power-up 1.5 - f/u 1.4 - Loop 1 OOS… |
| 1.3.6.1.4.1.498.18.1.2.1.1.12 | Columnuas7624LoopState | read-write | mandatory | A setting of inhibit(1) stops operation on the loop and a setting of enable(2) starts operation on the loop. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.2.1.1.13 | Columnuas7624ConfigMode | read-only | mandatory | This variable is used to report the mode, either soft or hard, of the the uas7624. If the unit is in hard mode then the options in the uas7624ConfigTable are r… |
| 1.3.6.1.4.1.498.18.1.3 | Nodeuas7624Configuration | |||
| 1.3.6.1.4.1.498.18.1.3.1 | Tableuas7624ConfigTable | not-accessible | mandatory | The GDC Configuration table. |
| 1.3.6.1.4.1.498.18.1.3.1.1 | Rowuas7624ConfigEntry | not-accessible | mandatory | The GDC Configuration table entry. |
| 1.3.6.1.4.1.498.18.1.3.1.1.1 | Columnuas7624ConfigIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For entire table: SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.3.1.1.2 | Columnuas7624NetworkInterfaceType | read-write | mandatory | Sets the transmit range to DSX-1 short or DS-1 long |
| 1.3.6.1.4.1.498.18.1.3.1.1.3 | Columnuas7624TransmitClockSource | read-write | mandatory | Sets the transmit clock source. |
| 1.3.6.1.4.1.498.18.1.3.1.1.4 | Columnuas7624PreEqualization | read-write | mandatory | Pre-Equalization distance |
| 1.3.6.1.4.1.498.18.1.3.1.1.5 | Columnuas7624Framing | read-write | mandatory | Set the framing for the interface. Abbreviations are as follows: eSF - Extended Super Frame d4 - Super Frame |
| 1.3.6.1.4.1.498.18.1.3.1.1.6 | Columnuas7624LineCoding | read-write | mandatory | Sets the line coding for the interface. |
| 1.3.6.1.4.1.498.18.1.3.1.1.7 | Columnuas7624LineBuildout | read-write | mandatory | Sets the line build out for the T1 interface. |
| 1.3.6.1.4.1.498.18.1.3.1.1.8 | Columnuas7624FDLMode | read-write | mandatory | Sets the Facility Data Link Mode. |
| 1.3.6.1.4.1.498.18.1.3.1.1.9 | Columnuas7624Loopback | read-write | mandatory | Sets the loopback type |
| 1.3.6.1.4.1.498.18.1.3.1.1.10 | Columnuas7624AISLoopdown | read-write | mandatory | Sets AIS unloop time where 4 = inhibit, 5 thru 60 = number of seconds |
| 1.3.6.1.4.1.498.18.1.3.1.1.11 | Columnuas7624LineBuildoutMode | read-write | mandatory | Sets the line build out mode for the T1 interface. |
| 1.3.6.1.4.1.498.18.1.3.1.1.12 | Columnuas7624FramingMode | read-write | mandatory | Set the framing mode. |
| 1.3.6.1.4.1.498.18.1.4 | Nodeuas7624Diagnostics | |||
| 1.3.6.1.4.1.498.18.1.4.1 | Tableuas7624DiagTable | not-accessible | mandatory | The GDC 7624 Diagnostics table. Information in the entries of this table support diagnostics testing, both active testing via patterns, and passive testing via… |
| 1.3.6.1.4.1.498.18.1.4.1.1 | Rowuas7624DiagEntry | not-accessible | mandatory | The GDC 7624 Diagnostics table entry. |
| 1.3.6.1.4.1.498.18.1.4.1.1.1 | Columnuas7624DiagIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. See DESCRIPTION's below for ranges. |
| 1.3.6.1.4.1.498.18.1.4.1.1.2 | Columnuas7624DiagConfig | read-write | mandatory | Selects test to run. (1) stops test. SCinstance: stopTest(1) [L]ine=1-5 [i]nterface=0-3 lineLoopback(2) [L]ine=5 [i]nterface=0 payloadLoopback(3) [L]ine=5 [i]n… |
| 1.3.6.1.4.1.498.18.1.4.1.1.3 | Columnuas7624T1TestLimit | read-write | mandatory | Selects the duration to run a T1 diagnostic test. The value(1) noLimit signifies that the test should run indefinitely until explicitly terminated. SCinstance:… |
| 1.3.6.1.4.1.498.18.1.4.1.1.4 | Columnuas7624T1TestExecutionStatus | read-only | mandatory | This variable reports the status of a T1 test. notInTest(1) indicates a test is not running. testInProgress(2) indicates that a test is currently running. test… |
| 1.3.6.1.4.1.498.18.1.4.1.1.5 | Columnuas7624T1TestExceptions | read-only | mandatory | Indicates T1 test exceptions that have occurred that may affect interpretation of the test results. The value of this object is a sum. This sum initially take … |
| 1.3.6.1.4.1.498.18.1.4.1.1.6 | Columnuas7624TestResults | read-only | mandatory | The results of the last T1 diagnostic test. This can be the current test running or the last completed test. Note that the interpretation of these results may … |
| 1.3.6.1.4.1.498.18.1.4.1.1.7 | Columnuas7624ResetTestResults | read-write | mandatory | Resets the diagnostic T1 or Loop error count. SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.5 | Nodeuas7624Performance | |||
| 1.3.6.1.4.1.498.18.1.5.3 | Tableuas7624CurrentTable | not-accessible | mandatory | The uas7624 Current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.498.18.1.5.3.1 | Rowuas7624CurrentEntry | not-accessible | mandatory | An entry in the uas7624 Current table. |
| 1.3.6.1.4.1.498.18.1.5.3.1.1 | Columnuas7624CurrentIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For this table: SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterf… |
| 1.3.6.1.4.1.498.18.1.5.3.1.2 | Columnuas7624CurrentStat | read-only | mandatory | Returns a bitwise snapshot of the interval statistics. for [L]ine=1-4 [i]nterface=1-3 (SIZE (10)) Octet 1 bit 7 - not used bit 6 - future use bit 5 - future us… |
| 1.3.6.1.4.1.498.18.1.5.4 | Tableuas7624IntervalTable | not-accessible | mandatory | The uas7624 Interval table contains various statistics collected by each Interface over the previous 24 hours of operation. For this table: SCinstance: [L]ine=… |
| 1.3.6.1.4.1.498.18.1.5.4.1 | Rowuas7624IntervalEntry | not-accessible | mandatory | An entry in the DS1 Interval table. |
| 1.3.6.1.4.1.498.18.1.5.4.1.1 | Columnuas7624IntervalIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. |
| 1.3.6.1.4.1.498.18.1.5.4.1.2 | Columnuas7624IntervalNumber | read-only | mandatory | For the T1 interface: A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes in… |
| 1.3.6.1.4.1.498.18.1.5.4.1.3 | Columnuas7624IntervalStat | read-only | mandatory | Returns a bitwise snapshot of the interval statistics. for [L]ine=1-4 [i]nterface=1-3 (SIZE (11)) Octet 1 bit 7 - not used bit 6 - future use bit 5 - future us… |
| 1.3.6.1.4.1.498.18.1.5.5 | Tableuas7624TotalTable | not-accessible | mandatory | The DS1 Total table. 24 hour interval. |
| 1.3.6.1.4.1.498.18.1.5.5.1 | Rowuas7624TotalEntry | not-accessible | mandatory | An entry in the DS1 Total table. |
| 1.3.6.1.4.1.498.18.1.5.5.1.1 | Columnuas7624TotalIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For this table: SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterf… |
| 1.3.6.1.4.1.498.18.1.5.5.1.2 | Columnuas7624TotalStat | read-only | mandatory | Returns a bitwise snapshot of the interval statistics. for [L]ine=1-4 [i]nterface=1-3 (SIZE (14)) Octet 1 bit 7 - not used bit 6 - future use bit 5 - future us… |
| 1.3.6.1.4.1.498.18.1.5.6 | Tableuas7624Recent24HrTable | not-accessible | mandatory | The Recent24Hr table. 4 hour interval |
| 1.3.6.1.4.1.498.18.1.5.6.1 | Rowuas7624Recent24HrEntry | not-accessible | mandatory | An entry in the Recent24Hr table. |
| 1.3.6.1.4.1.498.18.1.5.6.1.1 | Columnuas7624Recent24HrIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a For this table: SCinstance: [L]ine=1-4 [i]nte… |
| 1.3.6.1.4.1.498.18.1.5.6.1.2 | Columnuas7624Recent24HrStat | read-only | mandatory | Returns a bitwise snapshot of the interval statistics. Octet 1 bit 7 - not used bit 6 - future use bit 5 - future use bit 4 - future use bit 3 - future use bit… |
| 1.3.6.1.4.1.498.18.1.6 | Nodeuas7624AlarmConfig | |||
| 1.3.6.1.4.1.498.18.1.6.1 | Tableuas7624AlarmConfigTable | not-accessible | mandatory | This table contains entries that configure Alarm reporting. |
| 1.3.6.1.4.1.498.18.1.6.1.1 | Rowuas7624AlarmConfigEntry | not-accessible | mandatory | An entry in the uas7624 Alarm Configuration table. |
| 1.3.6.1.4.1.498.18.1.6.1.1.1 | Columnuas7624AlarmConfigIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For this table: SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterf… |
| 1.3.6.1.4.1.498.18.1.6.1.1.2 | Columnuas7624AlarmConfigIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.18.1.6.1.1.3 | Columnuas7624AlarmCountWindow | read-write | mandatory | This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Defa… |
| 1.3.6.1.4.1.498.18.1.6.1.1.4 | Columnuas7624AlarmCountThreshold | read-write | mandatory | This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given t… |
| 1.3.6.1.4.1.498.18.1.6.2 | Tableuas7624LocalAlarmConfigTable | not-accessible | mandatory | The uas7624LocalAlarmConfigTable contains entries that configure alarm reporting to the alarm card. |
| 1.3.6.1.4.1.498.18.1.6.2.1 | Rowuas7624LocalAlarmConfigEntry | not-accessible | mandatory | An entry in the GDC Local Alarm Configuration table. |
| 1.3.6.1.4.1.498.18.1.6.2.1.1 | Columnuas7624LocalAlarmConfigIndex | read-only | mandatory | Integer value which uniquely identifies the uas7624 to which this entry is applicable. For this table: See DESCRIPTION's below for ranges. |
| 1.3.6.1.4.1.498.18.1.6.2.1.2 | Columnuas7624LOSLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.3 | Columnuas7624LOFLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.4 | Columnuas7624AISLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.5 | Columnuas7624YELLOWLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.6 | Columnuas7624LineCodeViolationLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.7 | Columnuas7624CRCLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.10 | Columnuas7624ESLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.11 | Columnuas7624BESLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.12 | Columnuas7624SESLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.13 | Columnuas7624UASLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=1-4 [i]nterface=1-3 [L]ine=5 [i]nterface=0 |
| 1.3.6.1.4.1.498.18.1.6.2.1.14 | Columnuas7624OutofSyncLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.6.2.1.15 | Columnuas7624NoSealingCurrentLocal | read-write | mandatory | Disables or enables the alarm on the Major buss or Minor Buss. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.2 | Nodeuas7624 | |||
| 1.3.6.1.4.1.498.18.2.1 | Nodeuas7624Alarms | |||
| 1.3.6.1.4.1.498.18.2.1.1 | Nodeuas7624NoResponseAlm | |||
| 1.3.6.1.4.1.498.18.2.1.2 | Nodeuas7624DiagRxErrAlm | |||
| 1.3.6.1.4.1.498.18.2.1.3 | Nodeuas7624PowerUpAlm | |||
| 1.3.6.1.4.1.498.18.2.1.4 | Nodeuas7624LossOfSignalAlm | |||
| 1.3.6.1.4.1.498.18.2.1.5 | Nodeuas7624LossOfFrameAlm | |||
| 1.3.6.1.4.1.498.18.2.1.6 | Nodeuas7624AisAlm | |||
| 1.3.6.1.4.1.498.18.2.1.7 | Nodeuas7624YellowAlm | |||
| 1.3.6.1.4.1.498.18.2.1.8 | Nodeuas7624OutofSyncAlm | |||
| 1.3.6.1.4.1.498.18.2.1.9 | Nodeuas7624SealingCurrentNoContAlm | |||
| 1.3.6.1.4.1.498.18.2.1.10 | Nodeuas7624UASAlm | |||
| 1.3.6.1.4.1.498.18.2.1.11 | Nodeuas7624ESAlm | |||
| 1.3.6.1.4.1.498.18.2.1.12 | Nodeuas7624LineCodeViolationAlm | |||
| 1.3.6.1.4.1.498.18.2.1.13 | Nodeuas7624CRCAlm | |||
| 1.3.6.1.4.1.498.18.2.1.14 | Nodeuas7624BESAlm | |||
| 1.3.6.1.4.1.498.18.2.1.15 | Nodeuas7624SESAlm | |||
| 1.3.6.1.4.1.498.18.2.1.16 | Nodeuas7624MajorBERAlm | |||
| 1.3.6.1.4.1.498.18.2.1.17 | Nodeuas7624MinorBERAlm |