GDSFrameRelay-MIB
91 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1955 | Nodegds | |||
| 1.3.6.1.4.1.1955.5 | Nodeseriesfr | |||
| 1.3.6.1.4.1.1955.5.5 | Nodeis-GDS-frame-relay-device5 | |||
| 1.3.6.1.4.1.1955.5.5.1 | Nodeunit | |||
| 1.3.6.1.4.1.1955.5.5.1.1 | NodeuVersion-Strings | |||
| 1.3.6.1.4.1.1955.5.5.1.1.1 | ScalaruMain-HW-Version | read-only | mandatory | The frame relay encryptor mainboard HW version. |
| 1.3.6.1.4.1.1955.5.5.1.1.2 | ScalaruComm-HW-Version | read-only | mandatory | The frame relay encryptor commsboard HW version. |
| 1.3.6.1.4.1.1955.5.5.1.1.3 | ScalaruMain-SW-Version | read-only | mandatory | The frame relay encryptor mainboard SW version. Every effort will be made by GDS to make the MIB backwards compatible to the frame relay encryptor software. In… |
| 1.3.6.1.4.1.1955.5.5.1.1.4 | ScalaruComm-SW-Version | read-only | mandatory | The frame relay encryptor comms board SW version. |
| 1.3.6.1.4.1.1955.5.5.1.1.5 | ScalaruAlgorithm | read-only | mandatory | The frame relay encryptor encryption algorithm DES or GDS. |
| 1.3.6.1.4.1.1955.5.5.1.1.6 | ScalaruAccess-Table | read-only | mandatory | The frame relay encryptor access control table version. |
| 1.3.6.1.4.1.1955.5.5.1.2 | NodeuConfigured | |||
| 1.3.6.1.4.1.1955.5.5.1.2.1 | ScalaruOwn-SID | read-only | mandatory | The Station Identity of this frame relay encryptor . |
| 1.3.6.1.4.1.1955.5.5.1.3 | NodeuDynamic | |||
| 1.3.6.1.4.1.1955.5.5.1.3.1 | ScalaruCurrent-Date | read-write | mandatory | The uCurrentTime indicates the current date of the frame relay encryptor . Date is in the format dd/mm/yy. |
| 1.3.6.1.4.1.1955.5.5.1.3.2 | ScalaruCurrent-Time | read-write | mandatory | The uCurrentTime indicates the current time of the frame relay encryptor . Time is in the format hh:mm. |
| 1.3.6.1.4.1.1955.5.5.1.3.3 | ScalaruDevice-State | read-only | mandatory | The current state of the frame relay encryptor . There are two test states: test-empty with no security parameters loaded test-loaded which is entered with �… |
| 1.3.6.1.4.1.1955.5.5.1.3.4 | ScalaruComms-State | read-only | mandatory | The current state of the frame relay encryptor comms board. |
| 1.3.6.1.4.1.1955.5.5.1.3.5 | ScalaruNMS-State | read-only | mandatory | The current state of the SNMP agent for NMS requests. Only in the writeenabled state are Sets allowed. |
| 1.3.6.1.4.1.1955.5.5.1.3.6 | ScalaruSM-State | read-only | mandatory | The current state of the Right SM module. This should be checked after parameter updates in the configure group or the MIBII system group. |
| 1.3.6.1.4.1.1955.5.5.1.3.7 | ScalaruReady-Alarm-Led | read-only | mandatory | The state of the front panel LED red: GRETACODER is in Test Mode green: GRETACODER is in Normal Mode yellow: GRETACODER is performing a self test blinking-red:… |
| 1.3.6.1.4.1.1955.5.5.1.4 | NodeuBackground | |||
| 1.3.6.1.4.1.1955.5.5.1.4.1 | ScalaruRAG-tests | read-only | mandatory | The total number of Random Number Generator tests made A test is made once per minute. |
| 1.3.6.1.4.1.1955.5.5.1.4.2 | ScalaruRAG-fails | read-only | mandatory | The total number of Random Number Generator failures recorded |
| 1.3.6.1.4.1.1955.5.5.1.4.3 | ScalaruRAG-threshold | read-write | mandatory | The number of failures that should trigger a Trap. Changing this value also clears the tests and fails counters |
| 1.3.6.1.4.1.1955.5.5.2 | Nodeframe-relay | |||
| 1.3.6.1.4.1.1955.5.5.2.1 | Scalarreset-FR-statistic-counters | read-write | mandatory | This command clears all the frame relay statistical counters for both ports. |
| 1.3.6.1.4.1.1955.5.5.2.2 | TablefR-Traffic-Table | not-accessible | mandatory | The Statistics Table for the frame relay encryptor . |
| 1.3.6.1.4.1.1955.5.5.2.2.1 | RowfR-Traffic-Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1955.5.5.2.2.1.1 | ColumnfrPort-Index | read-only | mandatory | Port Number Index. The ifIndex Value of the corresponding ifEntry from rfc1213. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.2 | ColumnfrPort-Type | read-only | mandatory | Plain is on the local side, cipher the network |
| 1.3.6.1.4.1.1955.5.5.2.2.1.3 | ColumnfrGood-Frames | read-only | mandatory | The total number of frames received by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.4 | ColumnfrBad-Frames | read-only | mandatory | The number of bad frames received by the frame relay encryptor on a port. These are classified further in frRxErrTable. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.5 | ColumnfrInactive-DLCI | read-only | mandatory | The number of illegal or unknown DLCIs received by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.6 | ColumnfrReceived-FECN | read-only | mandatory | The number of frames with a forward congestion notification received by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.7 | ColumnfrReceived-BECN | read-only | mandatory | The number of frames with a backward congestion notification received by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.8 | ColumnfrSent-Frames | read-only | mandatory | The total number of frames transmitted by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.2.1.9 | ColumnfrDropped-Frames | read-only | mandatory | The total number of TX frames dropped by the frame relay encryptor on a port. |
| 1.3.6.1.4.1.1955.5.5.2.3 | TablefR-RX-Err-Table | not-accessible | mandatory | The receive error information for a frame relay encryptor frame relay port. |
| 1.3.6.1.4.1.1955.5.5.2.3.1 | RowfR-RX-Err-Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1955.5.5.2.3.1.1 | ColumnfrRxErrIndex | read-only | mandatory | Port Number Index. The ifIndex Value of the corresponding ifEntry from rfc1213. |
| 1.3.6.1.4.1.1955.5.5.2.3.1.2 | ColumnfrRxErrShort-Frames | read-only | mandatory | The number of short frames received. |
| 1.3.6.1.4.1.1955.5.5.2.3.1.3 | ColumnfrRxErrAborted-Frames | read-only | mandatory | The number of aborted frames received. |
| 1.3.6.1.4.1.1955.5.5.2.3.1.4 | ColumnfrRxErrResidual-Bits | read-only | mandatory | The number of residual bit frames received. |
| 1.3.6.1.4.1.1955.5.5.2.3.1.5 | ColumnfrRxErrOverruns | read-only | mandatory | The number of overruns received. |
| 1.3.6.1.4.1.1955.5.5.2.3.1.6 | ColumnfrRxErrCRC-Errors | read-only | mandatory | The number of CRC errors received. |
| 1.3.6.1.4.1.1955.5.5.3 | Nodeconfigure | |||
| 1.3.6.1.4.1.1955.5.5.3.1 | Nodepi-FR-Layer1 | |||
| 1.3.6.1.4.1.1955.5.5.3.1.1 | ScalarpiFRInterface-Installed | read-only | mandatory | The type of Frame Relay Physical interface. The following parameters are required for: - RS422/V35/X21 clock source - G703 E1 impedance, framemode, timeslots -… |
| 1.3.6.1.4.1.1955.5.5.3.1.2 | ScalarpiFRTX-Clock-Source | read-write | mandatory | Required if the physical type is: RS422 V.35 X.21 |
| 1.3.6.1.4.1.1955.5.5.3.1.3 | ScalarpiFRE1-Plain-Port-Impedance | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.4 | ScalarpiFRE1-Cipher-Port-Impedance | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.5 | ScalarpiFRE1-Framing-Mode | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.6 | ScalarpiFRE1-Time-Slot-Options | read-write | mandatory | Required if the physical type is G703 (E1) E1 time slot options available: Bit values shown in piFRE1-Time-Slots all slots, except TS0 0xff, 0xff, 0xff, 0xfe a… |
| 1.3.6.1.4.1.1955.5.5.3.1.7 | ScalarpiFRE1-Time-Slots | read-only | mandatory | An Octet bit string. Each bit defines an E1 time slot: 0= not used for frame relay 1= used for frame relay |
| 1.3.6.1.4.1.1955.5.5.3.1.8 | ScalarpiFRT1-Plain-Port-Pulse | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.9 | ScalarpiFRT1-Cipher-Port-Pulse | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.10 | ScalarpiFRT1-Framing-Mode | read-write | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.1.11 | ScalarpiFRT1-Time-Slot-Options | read-write | mandatory | Required if the physical type is T1 T1 time slot options available: Bit values shown in piFRT1TimeSlots all slots 0xff, 0xff, 0xff |
| 1.3.6.1.4.1.1955.5.5.3.1.12 | ScalarpiFRT1-Time-Slots | read-only | mandatory | An Octet bit string. Each bit defines a T1 time slot: 0= not used for frame relay 1= used for frame relay |
| 1.3.6.1.4.1.1955.5.5.3.2 | Nodepi-FR-Layer2 | |||
| 1.3.6.1.4.1.1955.5.5.3.2.1 | Scalarpi-FR-Logical-Interface-Type | read-only | mandatory | The type of Frame Relay logical interface. UNI = User to Network Interface NNI = Network to Network Interface |
| 1.3.6.1.4.1.1955.5.5.3.2.2 | Scalarpi-FR-Max-RX-Frame | read-write | mandatory | Maximum frame length in octets incoming |
| 1.3.6.1.4.1.1955.5.5.3.2.3 | Scalarpi-FR-Max-TX-Frame | read-write | mandatory | Maximum frame length in octets outgoing |
| 1.3.6.1.4.1.1955.5.5.3.2.4 | Scalarpi-FR-LMI-support | read-write | mandatory | LMI version |
| 1.3.6.1.4.1.1955.5.5.3.3 | Tablepi-FR-DLC-Ranges-Table | not-accessible | mandatory | The Table of Active DLCIs. |
| 1.3.6.1.4.1.1955.5.5.3.3.1 | Rowpi-FR-DLC-Ranges-Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.3.1.1 | ColumnpiFRDLcRangeBand | read-only | mandatory | The index number of this DLCI circuit band. |
| 1.3.6.1.4.1.1955.5.5.3.3.1.2 | ColumnpiFRDLcRangeUse | read-write | mandatory | The Type of use to be applied to the range defined in piFRDLcRangeStart and piFRDLcRangeEnd |
| 1.3.6.1.4.1.1955.5.5.3.3.1.3 | ColumnpiFRDLcRangeMode | read-only | mandatory | For future use |
| 1.3.6.1.4.1.1955.5.5.3.3.1.4 | ColumnpiFRDLcRangeStart | read-write | mandatory | The first DLCI in this band |
| 1.3.6.1.4.1.1955.5.5.3.3.1.5 | ColumnpiFRDLcRangeEnd-set-to-activate-changes | read-write | mandatory | The last DLCI in this band Setting this parameter activates the changes |
| 1.3.6.1.4.1.1955.5.5.3.5 | NodepiRemotePorts | |||
| 1.3.6.1.4.1.1955.5.5.3.5.1 | Nodepi-Remote-Port1 | |||
| 1.3.6.1.4.1.1955.5.5.3.5.1.1 | Scalarpi-Remote-Port1IP-Address | read-write | mandatory | The IP address for 1, the Ethernet line |
| 1.3.6.1.4.1.1955.5.5.3.5.1.2 | Scalarpi-Remote-Port1Subnet-mask | read-write | mandatory | The subnet mask associated with the IP address of the 1 Ethernet line. The value of the mask is an IP address with all the network bits set to 1 and all the ho… |
| 1.3.6.1.4.1.1955.5.5.3.5.1.3 | Scalarpi-Remote-Port1Gateway-Address | read-write | mandatory | The Gateway IP address for 1. The gateway is on the same network as the port, so the network bits must be identical to the port Ipaddress |
| 1.3.6.1.4.1.1955.5.5.3.5.2 | NodepiRemotePort2 | |||
| 1.3.6.1.4.1.1955.5.5.3.5.3 | Nodepi-Remote-Port3 | |||
| 1.3.6.1.4.1.1955.5.5.3.5.3.1 | Scalarpi-Remote-Port3IP-Address | read-write | mandatory | The IP address for 1, the serial line |
| 1.3.6.1.4.1.1955.5.5.3.5.3.2 | Scalarpi-Remote-Port3Subnet-mask | read-write | mandatory | The subnet mask associated with the IP address of the 3 serial line. The value of the mask is an IP address with all the network bits set to 1 and all the host… |
| 1.3.6.1.4.1.1955.5.5.3.5.3.3 | Scalarpi-Remote-Port3Gateway-Address | read-write | mandatory | The Gateway IP address for 3. The gateway is on the same network as the port, so the network bits must be identical to the port Ipaddress |
| 1.3.6.1.4.1.1955.5.5.3.5.3.4 | Scalarpi-Remote-Port3Data-link-protocol | read-only | mandatory | The type of Data link protocol. Currently only slip is supported |
| 1.3.6.1.4.1.1955.5.5.3.5.3.5 | Scalarpi-Remote-Port3Baudrate | read-write | mandatory | The Baud rate for async port 3. The other physical parameters are fixed as follows: Character Length: 8 bits Parity: none Stopbits: 1 |
| 1.3.6.1.4.1.1955.5.5.3.6 | NodepiApplication | |||
| 1.3.6.1.4.1.1955.5.5.3.6.1 | Tablepi-App-DLC-Cipher-Table | not-accessible | mandatory | The table of encrypted DLCIs port. |
| 1.3.6.1.4.1.1955.5.5.3.6.1.1 | Rowpi-App-DLC-Cipher-Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1955.5.5.3.6.1.1.1 | ColumnpiAppDLcCipherBand | read-only | mandatory | The index number of this DLCI circuit band. |
| 1.3.6.1.4.1.1955.5.5.3.6.1.1.2 | ColumnpiAppDLcCipherUse | read-write | mandatory | The Type of use (plain or cipher) to be applied to the range defined in piAppDLcCipherStart and piAppDLcCipherEnd. |
| 1.3.6.1.4.1.1955.5.5.3.6.1.1.3 | ColumnpiAppDLcCipherStart | read-write | mandatory | The first DLCI in this band |
| 1.3.6.1.4.1.1955.5.5.3.6.1.1.4 | ColumnpiAppDLcCipherEnd-set-to-activate-changes | read-write | mandatory | The last DLCI in this band Setting this parameter activates the changes |