H245-MIB
171 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| MULTI-MEDIA-MIB-TC | mmH245Root MmH323EndpointType MmTAddressTag |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0.8.341.1.3.1 | Identityh245 | |||
| 0.0.8.341.1.3.1.1 | Nodeh245Configuration | |||
| 0.0.8.341.1.3.1.1.1 | Tableh245ConfigurationTable | not-accessible | current | This table contains information about H.245 configuration parameters. It is a list of configuration parameter entries. The number of entries equals to the numb… |
| 0.0.8.341.1.3.1.1.1.1 | Rowh245ConfigurationTableEntry | not-accessible | current | It contains objects that describe the H.245 configuration parameters. |
| 0.0.8.341.1.3.1.1.1.1.1 | Columnh245ConfigT101Timer | read-write | current | This timer is used during Capability Exchange procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no Termi… |
| 0.0.8.341.1.3.1.1.1.1.2 | Columnh245ConfigT102Timer | read-write | current | This timer is used during Maintenance Loop procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum allowed time during which… |
| 0.0.8.341.1.3.1.1.1.1.3 | Columnh245ConfigT103Timer | read-write | current | This timer is used during Uni-directional and Bi-directional Logical Channel Signalling procedure. This timer is used in the AWAITING ESTABLISHMENT and AWAITIN… |
| 0.0.8.341.1.3.1.1.1.1.4 | Columnh245ConfigT104Timer | read-write | current | This timer is used during H.223 Multiplex Table procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no Mul… |
| 0.0.8.341.1.3.1.1.1.1.5 | Columnh245ConfigT105Timer | read-write | current | This timer is used during Round Trip Delay procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RoundTri… |
| 0.0.8.341.1.3.1.1.1.1.6 | Columnh245ConfigT106Timer | read-write | current | This timer is used during Master Slave Determination procedure. This timer is used in the OUTGOING AWAITING RESPONSE state and during the INCOMING AWAITING RES… |
| 0.0.8.341.1.3.1.1.1.1.7 | Columnh245ConfigT107Timer | read-write | current | This timer is used during Request Multiplex Entry procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum time during which … |
| 0.0.8.341.1.3.1.1.1.1.8 | Columnh245ConfigT108Timer | read-write | current | This timer is used during SEND Logical Channel procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no Requ… |
| 0.0.8.341.1.3.1.1.1.1.9 | Columnh245ConfigT109Timer | read-write | current | This timer is used during Mode Request procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RequestModeA… |
| 0.0.8.341.1.3.1.1.1.1.10 | Columnh245ConfigN100Counter | read-write | current | This counter specifies the maximum number of times that MasterSlaveDetermination messages will be sent during the OUTGOING AWAITING RESPONSE state. |
| 0.0.8.341.1.3.1.2 | Nodeh245ControlChannel | |||
| 0.0.8.341.1.3.1.2.1 | Tableh245ControlChannelStatsTable | not-accessible | current | This table contains information about H.245 statistics. It is a list of statistics entries. The number of entries equals to the number of control channels for … |
| 0.0.8.341.1.3.1.2.1.1 | Rowh245ControlChannelStatsTableEntry | not-accessible | current | It contains objects that describe the H.245 control channel statistics. |
| 0.0.8.341.1.3.1.2.1.1.1 | Columnh245ControlChannelNumberOfListenPorts | read-only | current | The number of H245 Listen ports. These ports are used for the remote entity to send a connect on |
| 0.0.8.341.1.3.1.2.1.1.2 | Columnh245ControlChannelMaxConnections | read-only | current | The number of maximum active h245 channels allowed. |
| 0.0.8.341.1.3.1.2.1.1.3 | Columnh245ControlChannelNumberOfListenFails | read-only | current | The number of Listen fails. The fail could be due to exhaustion of system resources |
| 0.0.8.341.1.3.1.2.1.1.4 | Columnh245ControlChannelNumberOfActiveConnections | read-only | current | The number of the active H245 connections. |
| 0.0.8.341.1.3.1.2.1.1.5 | Columnh245ControlChannelMasterSlaveMaxRetries | read-only | current | The number of maximum master slave retries. Reties are needed when the result of master slave process is indeterminate |
| 0.0.8.341.1.3.1.2.1.1.6 | Columnh245ControlChannelConnectionAttemptsFail | read-only | current | The number of failures when trying to connect to a listen port. |
| 0.0.8.341.1.3.1.2.1.1.7 | Columnh245ControlChanneMasterSlavelDeterminations | read-only | current | The number of MSD messages sent from a MSDSE to a peer MSDSE for master/slave determination purpose. |
| 0.0.8.341.1.3.1.2.1.1.8 | Columnh245ControlChannelMasterSlaveAcks | read-only | current | The number of acks that are used to confirm whether the terminal is the master terminal or the slave terminal, as indicated by decision. When decision is of ty… |
| 0.0.8.341.1.3.1.2.1.1.9 | Columnh245ControlChannelMasterSlaveRejects | read-only | current | The number of rejects of the MasterSlaveDetermination message. |
| 0.0.8.341.1.3.1.2.1.1.10 | Columnh245ControlChannelMasterSlaveT106Rejects | read-only | current | The number of rejects of the MasterSlaveDetermination message. When the cause is of type identicalNumbers, the rejection was due to the random numbers being eq… |
| 0.0.8.341.1.3.1.2.1.1.11 | Columnh245ControlChannelMasterSlaveMSDRejects | read-only | current | The number of MSD rejects of the MasterSlaveDetermination message. Rejects can happen due to different reasons like identical random number after maximum tries… |
| 0.0.8.341.1.3.1.2.1.1.12 | Columnh245ControlChannelNumberOfMasterSlaveInconsistentFieldRejects | read-only | current | The number of rejects of the MasterSlaveDetermination message. The cause is due to conflict in the status that both entities arrive to. |
| 0.0.8.341.1.3.1.2.1.1.13 | Columnh245ControlChannelMasterSlaveMaxCounterRejects | read-only | current | The number of rejects of the MasterSlaveDetermination message. There are many reasons why the rejection could happen. |
| 0.0.8.341.1.3.1.2.1.1.14 | Columnh245ControlChannelMasterSlaveReleases | read-only | current | The number of rejects due to a time out. |
| 0.0.8.341.1.3.1.2.1.1.15 | Columnh245ControlChannelNumberOfTunnels | read-only | current | The number of the active H245 tunnels. |
| 0.0.8.341.1.3.1.2.2 | Tableh245ControlChannelMasterSlaveTable | not-accessible | current | This table contains information about entities that are connected to this entity. It is a list of connection entries. The number of entries equals to the numbe… |
| 0.0.8.341.1.3.1.2.2.1 | Rowh245ControlChannelMasterSlaveTableEntry | not-accessible | current | It contains objects that describe the status of the master slave determination procedure. |
| 0.0.8.341.1.3.1.2.2.1.1 | Columnh245ControlChannelSrcAddressTag | not-accessible | current | It describes the type of address (IP v4, IPv6...) of the source |
| 0.0.8.341.1.3.1.2.2.1.2 | Columnh245ControlChannelSrcTransporTAddress | not-accessible | current | Source transport address. |
| 0.0.8.341.1.3.1.2.2.1.3 | Columnh245ControlChannelDesTAddressTag | not-accessible | current | It describes the type of address (IP v4, IPv6...) of the source |
| 0.0.8.341.1.3.1.2.2.1.4 | Columnh245ControlChannelDestTransporTAddress | not-accessible | current | Remote transport address. |
| 0.0.8.341.1.3.1.2.2.1.5 | Columnh245ControlChannelIndex | read-only | current | It is an arbitrary number that is being incremented by 1 for every entry in this table |
| 0.0.8.341.1.3.1.2.2.1.6 | Columnh245ControlChannelMSDState | read-only | current | It describes the state of the master slave determination procdure. It can be OUTGOING WAITING RESPONSE, INCOMING WAITING RESPONSE, IDLE |
| 0.0.8.341.1.3.1.2.2.1.7 | Columnh245ControlChannelTerminalType | read-only | current | Terminal type represents the type of H.323 terminal: 50 - terminal without MC 60 - gateway without MC 70 - terminal with MC but without MP 80 - gateway with MC… |
| 0.0.8.341.1.3.1.2.2.1.8 | Columnh245ControlChannelNumberOfMSDRetries | read-only | current | The number of tries of master slave determination before a meaningful result is concluded. |
| 0.0.8.341.1.3.1.2.2.1.9 | Columnh245ControlChannelIsTunneling | read-only | current | This variable indicates if tunneling is used for this channel. |
| 0.0.8.341.1.3.1.3 | Nodeh245CapExchange | |||
| 0.0.8.341.1.3.1.3.1 | Tableh245CapExchangeStatsTable | not-accessible | current | This table contains information about H.245 statistics for capabilities exchange procedure. It is a list of cap exchange statistics entries. The number of entr… |
| 0.0.8.341.1.3.1.3.1.1 | Rowh245CapExchangeStatsTableEntry | not-accessible | current | It contains objects that describe statistics for H.245 cap exchange procedure. |
| 0.0.8.341.1.3.1.3.1.1.1 | Columnh245CapExchangeSets | read-only | current | The total number of TerminalCapabilitySets that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySet is us… |
| 0.0.8.341.1.3.1.3.1.1.2 | Columnh245CapExchangeAcks | read-only | current | The total number of TerminalCapabilitySetAcks that were sent and received by local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySetAck is … |
| 0.0.8.341.1.3.1.3.1.1.3 | Columnh245CapExchangeRejects | read-only | current | The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySet… |
| 0.0.8.341.1.3.1.3.1.1.4 | Columnh245CapExchangeRejectUnspecified | read-only | current | The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set… |
| 0.0.8.341.1.3.1.3.1.1.5 | Columnh245CapExchangeRejectUndefinedTableEntryUsed | read-only | current | The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set… |
| 0.0.8.341.1.3.1.3.1.1.6 | Columnh245CapExchangeRejectDescriptorCapacityExceeded | read-only | current | The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set… |
| 0.0.8.341.1.3.1.3.1.1.7 | Columnh245CapExchangeRejectTableEntryCapacityExeeded | read-only | current | The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set… |
| 0.0.8.341.1.3.1.3.1.1.8 | Columnh245CapExchangeReleases | read-only | current | The total number of TerminalCapabilitySetReleases that were sent and received by the local CESE (Capability Exchange Signalling Entity). This means that a resp… |
| 0.0.8.341.1.3.1.3.2 | Tableh245CapExchangeCapabilityTable | not-accessible | current | Contains all the local incoming and outgoing CESEs (Capability Exchange Signalling Entity) that currently exists in this terminal. |
| 0.0.8.341.1.3.1.3.2.1 | Rowh245CapExchangeCapabilityTableEntry | not-accessible | current | Each entry contains either the local incoming or outgoing CESE (Capability Exchange Signalling Entity) that is derived from a particular H.245 Control Channel,… |
| 0.0.8.341.1.3.1.3.2.1.1 | Columnh245CapExchangeDirection | not-accessible | current | Represents either the local incoming CESE or the local outgoing CESE (Capability Exchange Signalling Entity). |
| 0.0.8.341.1.3.1.3.2.1.2 | Columnh245CapExchangeState | read-only | current | The current state of this CESE (Capability Exchange Signalling Entity). |
| 0.0.8.341.1.3.1.3.2.1.3 | Columnh245CapExchangeProtocolId | read-only | current | The version of the H.245 protocol used. This specifies how H.245 messages are formatted and used. |
| 0.0.8.341.1.3.1.3.2.1.4 | Columnh245CapExchangeRejectCause | read-only | current | The latest reject cause value extracted from the latest TerminalCapabilitySetReject. |
| 0.0.8.341.1.3.1.3.2.1.5 | Columnh245CapExchangeMultiplexCapability | read-only | current | The latest multiplexCapability extracted from a TerminalCapabilitySet. |
| 0.0.8.341.1.3.1.3.2.1.6 | Columnh245CapExchangeCapability | read-only | current | The latest capabilityTable extracted from the latest TerminalCapabilitySet. |
| 0.0.8.341.1.3.1.3.2.1.7 | Columnh245CapExchangeCapabilityDescriptors | read-only | current | The latest capabilityDescriptors extracted from the latest TerminalCapabilitySet. |
| 0.0.8.341.1.3.1.4 | Nodeh245LogChannels | |||
| 0.0.8.341.1.3.1.4.1 | Tableh245LogChannelsChannelTable | not-accessible | current | Contains all the local incoming and outgoing LCSEs (Uni or Bi-directional Logical Channel Signalling Entity) that currently exist in this terminal with their l… |
| 0.0.8.341.1.3.1.4.1.1 | Rowh245LogChannelsChannelTableEntry | not-accessible | current | Each entry contains either the local incoming or outgoing LCSE (Uni or Bi-directional Logical Channel Signalling Entity) that is derived from a particular H.24… |
| 0.0.8.341.1.3.1.4.1.1.1 | Columnh245LogChannelsChannelNumber | not-accessible | current | The forwardLogicalChannelNumber used to distinguish this media channel by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity). |
| 0.0.8.341.1.3.1.4.1.1.2 | Columnh245LogChannelsChannelDirection | not-accessible | current | Represents the direction of this media channel used by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity) . |
| 0.0.8.341.1.3.1.4.1.1.3 | Columnh245LogChannelsIndex | read-only | current | A unique value representing this media channel. |
| 0.0.8.341.1.3.1.4.1.1.4 | Columnh245LogChannelsChannelState | read-only | current | The current state of the media channel which also represents the state of this LCSE (Uni or Bi-directional Logical Channel Signalling Entity). |
| 0.0.8.341.1.3.1.4.1.1.5 | Columnh245LogChannelsMediaTableType | read-only | current | The actual media or data type used for this logical channel. |
| 0.0.8.341.1.3.1.4.2 | Tableh245LogChannelsH225Table | not-accessible | current | Contains the H2250LogicalChannelParameters that are used in all of the logical channels that are currently opened on this terminal. |
| 0.0.8.341.1.3.1.4.2.1 | Rowh245LogChannelsH225TableEntry | not-accessible | current | Each entry contains the actual specifics and options used in the H2250LogicalChannelParameters within a particular open logical channel. |
| 0.0.8.341.1.3.1.4.2.1.1 | Columnh245LogChannelsSessionId | read-only | current | A unique RTP or T.120 Session Identifier in a conference. It is used by the transmitter to refer to the session to which the logical channel applies. |
| 0.0.8.341.1.3.1.4.2.1.2 | Columnh245LogChannelsAssociateSessionId | read-only | current | This is used to associate one session with another in a conference. A typical use will be to associate an audio session with a video session to indicate which … |
| 0.0.8.341.1.3.1.4.2.1.3 | Columnh245LogChannelsMediaChannel | read-only | current | Indicates a transporTAddress to be used for the logical channel. |
| 0.0.8.341.1.3.1.4.2.1.4 | Columnh245LogChannelsMediaGuaranteedDelivery | read-only | current | Indicates whether or not the underlying media transport should be selected to provide or not to provide guaranteed delivery of data. |
| 0.0.8.341.1.3.1.4.2.1.5 | Columnh245LogChannelsMediaControlChannel | read-only | current | Indicates the media control channel in which the sender of the open logical channel will be listening for media control messages for this session. This field i… |
| 0.0.8.341.1.3.1.4.2.1.6 | Columnh245LogChannelsMediaControlGuaranteedDelivery | read-only | current | Indicates whether or not the underlying media control transport should be selected to provide or not to provide guaranteed delivery of data. This field is pres… |
| 0.0.8.341.1.3.1.4.2.1.7 | Columnh245LogChannelsSilenceSuppression | read-only | current | Indicates whether the transmitter stops sending packets during times of silence for bandwidth reasons. This can only be enabled for an audio channel only. |
| 0.0.8.341.1.3.1.4.2.1.8 | Columnh245LogChannelsDestination | read-only | current | Indicates the terminal label (composed of a mcu number and a terminal number) of the destination if one has been assigned. |
| 0.0.8.341.1.3.1.4.2.1.9 | Columnh245LogChannelsDynamicRTPPayloadType | read-only | current | Indicates a dynamic payload value which is used in H.323 for the H.225.0 alternative H.261 video packetization scheme. This field is present only when a dynami… |
| 0.0.8.341.1.3.1.4.2.1.10 | Columnh245LogChannelsH261aVideoPacketization | read-only | current | Indicates that the H.261 alternative RTP payload form is in use as described in H.225.0. |
| 0.0.8.341.1.3.1.4.2.1.11 | Columnh245LogChannelsRTPPayloadDescriptor | read-only | current | If the rfc-number is chosen, it indicates the offical document of the IETF in which the payload format is defined (OID). Obsolete RFCs should not be referenced… |
| 0.0.8.341.1.3.1.4.2.1.12 | Columnh245LogChannelsRTPPayloadType | read-only | current | Indicates which payload type value used. If the dynamic payload type is used, the values of this field and the logChannelsDynamicRTPPayloadType should match. |
| 0.0.8.341.1.3.1.4.2.1.13 | Columnh245LogChannelsTransportCapability | read-only | current | Indicates optional transport capabilites such as quality of service and median channel type capabilites. |
| 0.0.8.341.1.3.1.4.2.1.14 | Columnh245LogChannelsRedundancyEncoding | read-only | current | Indicates which redundancy encoding modes are supported (if any). The redundancyEncoding indicates that the redundant encoding method indicated in this paramet… |
| 0.0.8.341.1.3.1.4.2.1.15 | Columnh245LogChannelsSrcTerminalLabel | read-only | current | This is used to identify the terminal number of the sender of the OpenLogicalChannel message. |
| 0.0.8.341.1.3.1.4.3 | Tableh245LogChannelOpenLogicalChannelTable | not-accessible | current | This table contains information about statistics for H.245 open logical channels.It is a list of statistics entries. The number of entries equals to the number… |
| 0.0.8.341.1.3.1.4.3.1 | Rowh245LogChannelOpenLogicalChannelTableEntry | not-accessible | current | It contains objects that describe statistics for H.245 open logical channel procedure. |
| 0.0.8.341.1.3.1.4.3.1.1 | Columnh245LogChanOpenLogChanTotalRequests | read-only | current | The total number of attempts to open a uni-directional logical channel between an outgoing LCSE and a peer incoming LCSE and a bi-directional logical channel b… |
| 0.0.8.341.1.3.1.4.3.1.2 | Columnh245LogChanOpenLogChanAcks | read-only | current | The total number of confirmations to accept an open logical channel request. This would represent the final stage of establishing a uni-directional channel tha… |
| 0.0.8.341.1.3.1.4.3.1.3 | Columnh245LogChanOpenLogChanConfirms | read-only | current | The total number of confirmations used for the purpose of bi-directional channel signaling that the reverse channel is open and can be used for transmission. T… |
| 0.0.8.341.1.3.1.4.3.1.4 | Columnh245LogChanOpenLogChanRejects | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE. |
| 0.0.8.341.1.3.1.4.3.1.5 | Columnh245LogChanOpenLogChanRejectUnspecified | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.6 | Columnh245LogChanOpenLogChanRejectUnsuitableReverseParameters | read-only | current | The total number of rejections used as a response to a request to open a bi-directional logical channel from a B-LCSE when the reason for the rejection was the… |
| 0.0.8.341.1.3.1.4.3.1.7 | Columnh245LogChanOpenLogChanRejectDataTypeNotSupported | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.8 | Columnh245LogChanOpenLogChanRejectDataTypeNotAvailable | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.9 | Columnh245LogChanOpenLogChanRejectUnknownDataType | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.10 | Columnh245LogChanOpenLogChanRejectDataTypeALCombinationNotSupported | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.11 | Columnh245LogChanOpenLogChanRejectMulticastChannelNotAllowed | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.12 | Columnh245LogChanOpenLogChanRejectInsuffientBandwdith | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.13 | Columnh245LogChanOpenLogChanRejectSeparateStackEstablishmentFailed | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.14 | Columnh245LogChanOpenLogChanRejectInvalidSessionID | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.15 | Columnh245LogChanOpenLogChanRejectMasterSlaveConflict | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.16 | Columnh245LogChanOpenLogChanRejectWaitForCommunicationMode | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.17 | Columnh245LogChanOpenLogChanRejectInvalidDependentChannel | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.3.1.18 | Columnh245LogChansOpenLogChanRejectReplacementForRejected | read-only | current | The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the … |
| 0.0.8.341.1.3.1.4.4 | Tableh245LogChannelCloseLogicalChannelTable | not-accessible | current | This table contains information about H.245 statistics for close logical channel procedure. It is a list of statistics entries. The number of entries equals to… |
| 0.0.8.341.1.3.1.4.4.1 | Rowh245LogChannelCloseLogicalChannelTableEntry | not-accessible | current | It contains objects that describe statistics for H.245 close logical channel procedure. |
| 0.0.8.341.1.3.1.4.4.1.1 | Columnh245LogChanCloseLogChannels | read-only | current | The number of attempts made by the outgoing LCSE or B-LCSE to close a logical channel between two peer LCSEs or B-LCSEs. Note - In the case of a bi-directional… |
| 0.0.8.341.1.3.1.4.4.1.2 | Columnh245LogChanCloseLogChanAcks | read-only | current | The number of attempts made to confirm the closing of a logical channel connection. |
| 0.0.8.341.1.3.1.4.4.1.3 | Columnh245LogChanCloseLogChanRequests | read-only | current | The number of attempts made by the outgoing CLCSE to request the closing of a logical channel connection between two peer LCSEs. |
| 0.0.8.341.1.3.1.4.4.1.4 | Columnh245LogChanCloseLogChanRequestsAcks | read-only | current | The number of attempts made by the incoming CLCSE to indicate that the logical channel connection will be closed. |
| 0.0.8.341.1.3.1.4.4.1.5 | Columnh245LogChanCloseLogChanRequestRejects | read-only | current | The number of attempts made by the incoming CLCSE to indicate that the logical channel connection will not be closed. The only valid cause value for rejecting … |
| 0.0.8.341.1.3.1.4.4.1.6 | Columnh245LogChanCloseLogChanRequestReleases | read-only | current | The number of attempts made by the outgoing CLCSE in the case of a time out. |
| 0.0.8.341.1.3.1.5 | Nodeh245Conference | |||
| 0.0.8.341.1.3.1.5.1 | Tableh245ConferenceTerminalTable | not-accessible | current | This table contains information about the terminal charachteristics that are related to a conference. It is a list entries. The number of entries equals to the… |
| 0.0.8.341.1.3.1.5.1.1 | Rowh245ConferenceTerminalTableEntry | not-accessible | current | It contains objects that describe a terminal as a conference participant. |
| 0.0.8.341.1.3.1.5.1.1.1 | Columnh245ConferenceConferenceId | not-accessible | current | The conference identifier. |
| 0.0.8.341.1.3.1.5.1.1.2 | Columnh245ConferenceTerminalLabel | not-accessible | current | The terminal label of this terminal |
| 0.0.8.341.1.3.1.5.1.1.3 | Columnh245ConferenceControlChannelIndex | read-only | current | The index of the control channel table that identifies the control channel for the conference. |
| 0.0.8.341.1.3.1.5.1.1.4 | Columnh245ConferenceBroadcaster | read-only | current | The indicator of the terminal being a broadcaster. |
| 0.0.8.341.1.3.1.5.1.1.5 | Columnh245ConferenceConferenceChair | read-only | current | The indicator of the terminal being a conference chair. |
| 0.0.8.341.1.3.1.5.1.1.6 | Columnh245ConferenceMultipoint | read-only | current | The indicator of the conference being a multipoint. |
| 0.0.8.341.1.3.1.5.2 | Tableh245ConferenceStatsTable | not-accessible | current | This table contains information about conference statistics. It is a list of conference statistics entries. The number of entries equals to the number of confe… |
| 0.0.8.341.1.3.1.5.2.1 | Rowh245ConferenceStatsTableEntry | not-accessible | current | It contains objects that describe conference statistics. |
| 0.0.8.341.1.3.1.5.2.1.1 | Columnh245ConferenceBroadcastMyLogicalChannel | read-only | current | The number of attempts made by a terminal to transmit MCV command to force an associated MCU to broadcast its video signal used to transmit the picture of a ch… |
| 0.0.8.341.1.3.1.5.2.1.2 | Columnh245ConferenceCancelBroadcastMyLogicalChannel | read-only | current | The number of attempts made by a terminal to cancel MCV command. |
| 0.0.8.341.1.3.1.5.2.1.3 | Columnh245ConferenceSendThisSource | read-only | current | The number of attempts made by a terminal to send VCS command to MCU to cause transmission to itself of the video from the terminal whose identity number follo… |
| 0.0.8.341.1.3.1.5.2.1.4 | Columnh245ConferenceCancelSendThisSource | read-only | current | The number of attempts made by a terminal to cancel VCS and return to automatic video switching at the MCU. |
| 0.0.8.341.1.3.1.5.2.1.5 | Columnh245ConferenceDropConference | read-only | current | The number of attempts made by a terminal that is chair-control to drop all terminals from the conference. |
| 0.0.8.341.1.3.1.5.2.1.6 | Columnh245ConferenceEqualiseDelay | read-only | current | The same meaning as the command ACE in H.230. |
| 0.0.8.341.1.3.1.5.2.1.7 | Columnh245ConferenceZeroDelay | read-only | current | The same meaning as the command ACZ defined in H.230. |
| 0.0.8.341.1.3.1.5.2.1.8 | Columnh245ConferenceMultipointModeCommand | read-only | current | The number of attempts made by the MCU to send request to a terminal to comply with all MCU requestMode requests. |
| 0.0.8.341.1.3.1.5.2.1.9 | Columnh245ConferenceCancelMultipointModeCommand | read-only | current | The number of attempts made by the MCU to send a cancelation of a MultipointModeCommand. |
| 0.0.8.341.1.3.1.5.2.1.10 | Columnh245ConferenceVideoFreezePicture | read-only | current | The number of commands that are sent/received to/from the video decoder to complete updating the current video frame and subsequently display the frozen pictur… |
| 0.0.8.341.1.3.1.5.2.1.11 | Columnh245ConferenceVideoFastUpdatePicture | read-only | current | The number of commands sent/received to enter the fast update mode. |
| 0.0.8.341.1.3.1.5.2.1.12 | Columnh245ConferenceVideoFastUpdateGOB | read-only | current | The number of commands sent/received by the video encoder to fast update one or more GOBs. |
| 0.0.8.341.1.3.1.5.2.1.13 | Columnh245ConferenceVideoTemporalSpatialTradeOff | read-only | current | The number of commands sent/received by video encoder to change its trade off between temporal and spatial resolution. |
| 0.0.8.341.1.3.1.5.2.1.14 | Columnh245ConferenceVideoSendSyncEveryGOB | read-only | current | The number of commands sent/received by video encoder to use sync for every GOB until the cancel command is received. |
| 0.0.8.341.1.3.1.5.2.1.15 | Columnh245ConferenceVideoFastUpdateMB | read-only | current | The number of sent/received by video encoder to perform a fast update of one or more MBs. |
| 0.0.8.341.1.3.1.6 | Nodeh245Misc | |||
| 0.0.8.341.1.3.1.6.1 | Tableh245MiscRoundTripDelayTable | not-accessible | current | This table contains information about round trip delay tests. It is a list round trip delay entries. The number of entries equals to the number of tests perfor… |
| 0.0.8.341.1.3.1.6.1.1 | Rowh245MiscRoundTripDelayTableEntry | not-accessible | current | It contains information about the round trip delay messages. |
| 0.0.8.341.1.3.1.6.1.1.1 | Columnh245MiscRTDState | read-only | current | The state of the round trip delay. It can be either idle or waiting for response. |
| 0.0.8.341.1.3.1.6.1.1.2 | Columnh245MiscT105TimerExpired | read-only | current | Round trip delay timer expired waiting for a respinse from the other entity. |
| 0.0.8.341.1.3.1.6.1.1.3 | Columnh245MiscLastRTDRequestSent | read-only | current | Information about the last round trip delay request sent. |
| 0.0.8.341.1.3.1.6.1.1.4 | Columnh245MiscLastRTDRequestRcvd | read-only | current | Information about the last round trip delay request received. |
| 0.0.8.341.1.3.1.6.1.1.5 | Columnh245MiscLastRTDResponseSent | read-only | current | Information about the last round trip delay response sent. |
| 0.0.8.341.1.3.1.6.1.1.6 | Columnh245MiscLastRTDResponseRcvd | read-only | current | Information about the last round trip delay response received. |
| 0.0.8.341.1.3.1.6.2 | Tableh245MiscMaintenanceLoopTable | not-accessible | current | This table contains information about maintenance loop mode. It is a list of maintenance loop entries. The number of entries equals to the number of maintenanc… |
| 0.0.8.341.1.3.1.6.2.1 | Rowh245MiscMaintenanceLoopTableEntry | not-accessible | current | It contains entries that describe the maintenance loop procedure. |
| 0.0.8.341.1.3.1.6.2.1.1 | Columnh245MiscMaintenanceLoopDirection | not-accessible | current | The direction could be either incoming or outgoing. |
| 0.0.8.341.1.3.1.6.2.1.2 | Columnh245MiscMLState | read-only | current | The state of the channel which can be: not looped, waiting to be looped or looped. |
| 0.0.8.341.1.3.1.6.2.1.3 | Columnh245MiscNumberOfRequests | read-only | current | Number of loop requests on that channel. |
| 0.0.8.341.1.3.1.6.2.1.4 | Columnh245MiscNumberOfAcks | read-only | current | Number of maintenance loop acks on the channel. |
| 0.0.8.341.1.3.1.6.2.1.5 | Columnh245MiscLastMLRequestOrAckType | read-only | current | The type of the last request or response received. The type can be either media or logical channel loop. |
| 0.0.8.341.1.3.1.6.2.1.6 | Columnh245MiscMLMediaOrLogicalChannelLoopRejectChannelNumber | read-only | current | If the loop rejecte is of type media loop or logical channel loop then this represents the channel number for the logical channel. |
| 0.0.8.341.1.3.1.6.2.1.7 | Columnh245MiscNumberOfRejects | read-only | current | Number of loop requests that got rejected. |
| 0.0.8.341.1.3.1.6.2.1.8 | Columnh245MiscLastRejectType | read-only | current | The type of the last reject for the loop request. |
| 0.0.8.341.1.3.1.6.2.1.9 | Columnh245MiscErrorCode | read-only | current | The error code that caused the rejection of the loop request. |
| 0.0.8.341.1.3.1.7 | Nodeh245MIBConformance | |||
| 0.0.8.341.1.3.1.7.1 | Nodeh245MIBGroups | |||
| 0.0.8.341.1.3.1.7.1.1 | Grouph245ConfigurationGroup | current | . | |
| 0.0.8.341.1.3.1.7.1.2 | Grouph245ControlChannelGroup | current | . | |
| 0.0.8.341.1.3.1.7.1.3 | Grouph245CapExchangeGroup | current | . | |
| 0.0.8.341.1.3.1.7.1.4 | Grouph245LogChannelsGroup | current | . | |
| 0.0.8.341.1.3.1.7.1.5 | Grouph245ConferenceGroup | current | . | |
| 0.0.8.341.1.3.1.7.1.6 | Grouph245MiscGroup | current | . | |
| 0.0.8.341.1.3.1.7.2 | Complianceh245MIBCompliance | current | The set of objects required for compliance. |