H320TERMINAL-MIB
60 objects
This MIB module supports the functions of an ITU H.320 terminal
Imported Objects
| ISDN-MIB | IsdnSignalingProtocol |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | experimental Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.320.3 | Identityh320TerminalMIB | This MIB module supports the functions of an ITU H.320 terminal | ||
| 1.3.6.1.3.320.3.1 | Nodesystem | |||
| 1.3.6.1.3.320.3.1.1 | ScalarsysDescr | read-only | current | A textual description of the terminal. This value should include the full name and version identification of the system's hardware type and software. |
| 1.3.6.1.3.320.3.1.2 | ScalarsysContact | read-only | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.3.320.3.1.3 | Scalarsyst35CountryCode | read-only | current | Country code, per T.35. |
| 1.3.6.1.3.320.3.1.4 | Scalarsyst35CountryCodeExtention | read-only | current | Assigned nationally. |
| 1.3.6.1.3.320.3.1.5 | Scalarsyst35ManufacturerCode | read-only | current | Assigned nationally. |
| 1.3.6.1.3.320.3.1.6 | ScalarsysLocation | read-only | current | The physical location of this system. For instance, closet, terminal room and so on |
| 1.3.6.1.3.320.3.1.7 | ScalarsysH320TerminalUptime | read-only | current | The amount of time (in hundredths of a second) since this H320 terminal was last initialized. Note that this is different from sysUpTime in MIB-II [ ] because … |
| 1.3.6.1.3.320.3.1.8 | ScalarsysH320TerminalLocalTime | read-write | current | The local date and time of day. |
| 1.3.6.1.3.320.3.1.9 | ScalarsysH320TerminalDiagnostics | read-only | current | Indicates the results of the last diagnostic routine performed. noResults(1) No diagnostic has yet been performed, passed(2) the diagnostic has been passed, ha… |
| 1.3.6.1.3.320.3.1.10 | ScalarsysH320TerminalStatus | read-only | current | General status of the terminal |
| 1.3.6.1.3.320.3.1.11 | ScalarsysH320TerminalIfType | read-only | current | The interface type on which this terminal can be called. The interface type identified by this value is the same type of as the ifType from Interface Table in … |
| 1.3.6.1.3.320.3.2 | Nodeconfiguration | |||
| 1.3.6.1.3.320.3.2.1 | ScalarconfigH320TerminalSiteName | read-write | current | Name of the site where the H320 terminal is located. For instance, conference room 1 in Austin, or New York, and so on. sysLocation provides the location infor… |
| 1.3.6.1.3.320.3.2.2 | ScalarconfigH320TerminalVideoSystem | read-write | current | Video format standard used by the terminal |
| 1.3.6.1.3.320.3.2.3 | ScalarconfigH320TerminalIPAddress | read-write | current | The IP address of the h.320 terminal. |
| 1.3.6.1.3.320.3.2.4 | ScalarconfigH320ISDNSwitchType | read-write | current | Type of ISDN switch interface to the h.320 terminal. Switch types are specified in ISDN-MIB. |
| 1.3.6.1.3.320.3.2.5 | ScalarconfigH320ISDNAddrNumber | read-write | current | The number of addresses that each terminal has. |
| 1.3.6.1.3.320.3.2.6 | TableconfigISDNAddrTable | not-accessible | current | AN ISDN address table. |
| 1.3.6.1.3.320.3.2.6.1 | RowconfigISDNAddrEntry | not-accessible | current | AN ISDN address row. |
| 1.3.6.1.3.320.3.2.6.1.1 | ColumnconfigH320AddrIndex | not-accessible | current | A unique value for each ISDN address entry. the value ranges between 1 and the value of cionfigISDNAddrNumber. |
| 1.3.6.1.3.320.3.2.6.1.2 | ColumnconfigH320ISDNAddress | read-write | current | ISDN port address. |
| 1.3.6.1.3.320.3.2.6.1.3 | ColumnconfigH320ISDNSPID | read-write | current | ISDN port SPID. |
| 1.3.6.1.3.320.3.3 | NodecallSites | |||
| 1.3.6.1.3.320.3.3.1 | Scalarh320CallSiteNumber | read-write | current | The number of site entries that this system contains. |
| 1.3.6.1.3.320.3.3.2 | Scalarh320XferNextIndex | read-only | current | Identifies the next value of h320SiteIndex to be used in a row creation attempt for the h320CallSiteTable. If new rows cannot be created, this object will have… |
| 1.3.6.1.3.320.3.3.3 | Tableh320CallSiteTable | not-accessible | current | A list of video conferencing site entries. The total number of site entries is given by the value of h320CallsiteNumber. |
| 1.3.6.1.3.320.3.3.3.1 | Rowh320CallSiteEntry | not-accessible | current | A video conference site row. Rows are created by an SNMP SET request setting the value of h320SiteRowStatus to 'createandGo. Rows are deleted by an SNMP SET re… |
| 1.3.6.1.3.320.3.3.3.1.1 | Columnh320SiteIndex | not-accessible | current | A unique value for each video conference Site entry. The value ranges between 1 and the value of h320SiteNumber. |
| 1.3.6.1.3.320.3.3.3.1.2 | Columnh320SiteName | read-create | current | A textual string assigning a name to a video conference system. |
| 1.3.6.1.3.320.3.3.3.1.3 | Columnh320SiteIfType | read-create | current | The interface type on which this site can be called. The interface type identified by this value is the same type of as the ifType from Interface Table in RFC1… |
| 1.3.6.1.3.320.3.3.3.1.4 | Columnh320SiteLineRate | read-create | current | The line rate that the terminal can be called. |
| 1.3.6.1.3.320.3.3.3.1.5 | Columnh320CallMode | read-create | current | 1 means the remote terminal supports the autoconfiguration. 2 means the manual configuration is required to call the remote terminal. In this case the, followi… |
| 1.3.6.1.3.320.3.3.3.1.6 | Columnh320VideoMode | read-create | current | A video mode for manual configuration. |
| 1.3.6.1.3.320.3.3.3.1.7 | Columnh320AudioMode | read-create | current | An audio mode for manual configuration. |
| 1.3.6.1.3.320.3.3.3.1.8 | Columnh320ISDNAddrNumber | read-create | current | The number of ISDN addresses needed to make a call to the remote terminal. |
| 1.3.6.1.3.320.3.3.3.1.9 | Columnh320SiteRowStatus | read-create | current | The row status of the entry. This object is required to create or delete rows administratively. An agent implementing this object is not required to support th… |
| 1.3.6.1.3.320.3.3.4 | Tableh320ISDNAddrTable | not-accessible | current | A list of ISDN addresses to call the remote site. This is an extended table of the base table h320CallSiteTable. |
| 1.3.6.1.3.320.3.3.4.1 | Rowh320ISDNAddrEntry | not-accessible | current | A video conference site row. Rows are created by an SNMP SET request setting the value of h320AddrRowStatus to 'createandGo. Rows are deleted by an SNMP SET re… |
| 1.3.6.1.3.320.3.3.4.1.1 | Columnh320AddrIndex | not-accessible | current | A unique value for each ISDN address entry. The value ranges between 1 and the value of h320AddrNumberin the base table. |
| 1.3.6.1.3.320.3.3.4.1.2 | Columnh320ISDNAddress | read-create | current | A textual string assigning an address of the conference system. |
| 1.3.6.1.3.320.3.3.4.1.3 | Columnh320AddrRowStatus | read-create | current | The row status of the entry. This object is required to create or delete rows administratively. An agent implementing this object is not required to support th… |
| 1.3.6.1.3.320.3.4 | Nodecontrol | |||
| 1.3.6.1.3.320.3.4.1 | ScalarcontrolH320TerminalAdmin | read-write | current | The desired state of the H320 terminal. Setting the value if this object to these values will have the following actions: run(1) The H320 terminal will enter t… |
| 1.3.6.1.3.320.3.4.2 | ScalarcontrolH320TerminalCallSetUp | read-write | current | Dial another video conference terminal. Set this value to the index of the site of the video conference site you want to dial in the Site Table in the h320Call… |
| 1.3.6.1.3.320.3.4.3 | ScalarcontrolH320TerminalCallHangup | read-write | current | Hang up the video conference call in progress now. |
| 1.3.6.1.3.320.3.4.4 | ScalarcontrolH320EnableLocalLoopback | read-write | current | Enable or disable local loop back on a video conference system. Local loopbacks loop back the audio, video and data streams in a call. Once looped back, a new … |
| 1.3.6.1.3.320.3.4.5 | ScalarcontrolH320EnableRemoteLoopback | read-write | current | Enable or disable remote loop back on a video conference system. Remote loopbacks loop back the audio and video streams from the remote system in a call.. When… |
| 1.3.6.1.3.320.3.5 | Nodeh320TerminalMIBConfs | |||
| 1.3.6.1.3.320.3.5.1 | Nodeh320TerminalMIIBGroups | |||
| 1.3.6.1.3.320.3.5.1.1 | Grouph320TerminalDesrGroup | current | A collection of objects providing the description of the terminal | |
| 1.3.6.1.3.320.3.5.1.2 | Grouph320TerminalConfgGroup | current | A collection of objects providing the ability to configure the terminal | |
| 1.3.6.1.3.320.3.5.1.3 | Grouph320TerminalCallSitesGroup | current | A collection of objects providing the information about the site the terminal can call | |
| 1.3.6.1.3.320.3.5.1.4 | Grouph320TerminalControlGroup | current | A collection of objects providing the ability to invoke terminal functions | |
| 1.3.6.1.3.320.3.5.2 | Nodeh320TerminalMIBCompl | |||
| 1.3.6.1.3.320.3.5.2.1 | Complianceh320TErminalCompliance | current | The set of objects required for compliance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AudioTypes | Integer32 | current | This object represents the audio capabilities of the H320 entity. This includes the various audio algorithms that it supports. It is encoded as bits in an octet string, with the following definitions: Capability Bit # g… |
| LineRates | Integer32 | current | This object represents the line rate capabilities of the H.320 entity. This includes the various line rates that it supports. It is encoded as bits in an octet string as follows: Capability Bit# 64 Kbits/s 0 2x64 Kbits/… |
| VideoFormats | Integer32 | current | This object represents the video capabilities of the H320 entity. This includes the various video algorithms that it supports. It is encoded as bits in an octet string, with the following definitions: Capability Bit # h… |