H323TERMINAL-MIB
36 objects
This MIB module supports the functions of an ITU H.323 terminal
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | experimental Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.323.3 | Identityh323TerminalMIB | This MIB module supports the functions of an ITU H.323 terminal | ||
| 1.3.6.1.3.323.3.1 | Nodeh323TerminalDescr | |||
| 1.3.6.1.3.323.3.1.1 | Scalarh323t35CountryCode | read-only | current | Country code, per T.35. |
| 1.3.6.1.3.323.3.1.2 | Scalarh323t35CountryCodeExtention | read-only | current | Assigned nationally. |
| 1.3.6.1.3.323.3.1.3 | Scalarh323t35ManufacturerCode | read-only | current | Assigned nationally. |
| 1.3.6.1.3.323.3.1.4 | Scalarh323TerminalUptime | read-only | current | The amount of time (in hundredths of a second) since this H323 terminal was last initialized. Note that this is different from sysUpTime in MIB-II [ ] because … |
| 1.3.6.1.3.323.3.1.5 | Scalarh323TerminalLocalTime | read-write | current | The local date and time of day. |
| 1.3.6.1.3.323.3.1.6 | Scalarh323TerminalDiagnostics | read-only | current | Indicates the results of the last diagnostic routine performed noResults(1) No diagnostic has yet been performed, passed(2) the diagnostic has been passed, har… |
| 1.3.6.1.3.323.3.1.7 | Scalarh323TerminalStatus | read-only | current | General status of the terminal |
| 1.3.6.1.3.323.3.2 | Nodeh323TerminalCaps | |||
| 1.3.6.1.3.323.3.2.1 | Scalarh323TerminalMaxLineRate | read-only | current | This object represents maximum line rate of combined audio/video and data of this terminal. |
| 1.3.6.1.3.323.3.2.2 | Scalarh323TerminalVideoCaps | read-only | current | This object represents the video capabilities of this terminal. This includes the various video algorithms that it supports. It is encoded as bits in an octet … |
| 1.3.6.1.3.323.3.2.3 | Scalarh323TerminalMaxVideoRate | read-only | current | The maximum bit rate that the video channel can do. |
| 1.3.6.1.3.323.3.2.4 | Scalarh323TerminalAudioCaps | read-only | current | This object represents the audio capabilities of this terminal. This includes the various audio algorithms that it supports. It is encoded as bits in an octet … |
| 1.3.6.1.3.323.3.2.5 | Scalarh323TerminalDataCaps | read-only | current | This object represents the data application capability of the terminal. It is encoded as bits in an octet string, with the following definitions: Capability Bi… |
| 1.3.6.1.3.323.3.2.6 | Scalarh323TerminalEncrypCaps | read-only | current | This object represents the encryption capability of the terminal. Capability Bit # H.235 0 Others 1 Bits are numbered starting with the most significant bit of… |
| 1.3.6.1.3.323.3.2.7 | Scalarh323TerminalRDCCaps | read-only | current | This object represents the Remote Device Control capability of the terminal. FECC 0 Others 1 Bits are numbered starting with the most significant bit of the fi… |
| 1.3.6.1.3.323.3.3 | Nodeh323TerminalConfig | |||
| 1.3.6.1.3.323.3.3.1 | Scalarh323TerminalSiteName | read-write | current | Name of the site where the H323 terminal is located. |
| 1.3.6.1.3.323.3.3.2 | Scalarh323TerminalVideoSystem | read-write | current | Video format standard |
| 1.3.6.1.3.323.3.3.3 | Scalarh323TerminalfType | read-write | current | The interface type on which this site can be called. The interface type identified by this value is the same type of as the ifType from Interface Table in RFC1… |
| 1.3.6.1.3.323.3.3.4 | Scalarh323TerminalIPAddress | read-write | current | The IP address of the terminal. |
| 1.3.6.1.3.323.3.4 | Nodeh323TerminalControl | |||
| 1.3.6.1.3.323.3.4.1 | Scalarh323TerminalAdminControl | read-write | current | The desired state of the H323 terminal. Setting the value if this object to these values will have the following actions: run(1) The H323 terminal will enter t… |
| 1.3.6.1.3.323.3.4.2 | Scalarh323TerminalCallSetUp | read-write | current | establish a call to another video conference terminal. Set this value to the index of the site of the video conference site you want to dial in the Site Table … |
| 1.3.6.1.3.323.3.4.3 | Scalarh323TerminalCallHangup | read-write | current | Hang up the video conference call in progess now. |
| 1.3.6.1.3.323.3.4.4 | Scalarh323EnableLocalLoopback | read-write | current | Enable or disable local loop back on a video conference system. Local loopbacks loop back the audio, video and data streams in a call. Once looped back, a new … |
| 1.3.6.1.3.323.3.4.5 | Scalarh323EnableRemoteLoopback | read-write | current | Enable or disable remote loop back on a video conference system. Remote loopbacks loop back the audio and video streams from the remote system in a call.. When… |
| 1.3.6.1.3.323.3.5 | Nodeh323TerminalMIBConfs | |||
| 1.3.6.1.3.323.3.5.1 | Nodeh323TerminalMIBGroups | |||
| 1.3.6.1.3.323.3.5.1.1 | Grouph323TerminalDesrGroup | current | A collection of objects providing the description of the terminal | |
| 1.3.6.1.3.323.3.5.1.2 | Grouph323TerminalCapsGroup | current | A collection of objects providing capabilities of the terminal | |
| 1.3.6.1.3.323.3.5.1.3 | Grouph323TerminalConfigGroup | current | A collection of objects providing the ability to configure the terminal | |
| 1.3.6.1.3.323.3.5.1.4 | Grouph323TerminalControlGroup | current | A collection of objects providing the ability to invoke terminal functions | |
| 1.3.6.1.3.323.3.5.2 | Nodeh323TerminalMIBCompl | |||
| 1.3.6.1.3.323.3.5.2.1 | Complianceh323TerminalCompliance | current | The set of objects required for compliance |