MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

H3C-RDDC-MIB

27 objects

Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over the function of the failed group-node with minimal service interruption. This module defines the objects pertaining to redundancy group(RDDC).

Imported Objects

HUAWEI-3COM-OID-MIB	h3cCommon
IF-MIB	ifDescr ifIndex
SNMPv2-SMI	Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.10.2.151	Identityh3cRddc			Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the …
1.3.6.1.4.1.2011.10.2.151.0	Nodeh3cRddcNotifications
1.3.6.1.4.1.2011.10.2.151.0.1	Notificationh3cRddcSwitchoverTrap		current	Notification to signal switchover/failover.
1.3.6.1.4.1.2011.10.2.151.0.2	Notificationh3cRddcFailIfRecoverTrap		current	Notification to signal the failed interface recovered.
1.3.6.1.4.1.2011.10.2.151.0.3	Notificationh3cRddcFailIfGenerateTrap		current	Notification to signal the failed interface generated.
1.3.6.1.4.1.2011.10.2.151.1	Nodeh3cRddcObjects
1.3.6.1.4.1.2011.10.2.151.1.1	Nodeh3cRddcInfo
1.3.6.1.4.1.2011.10.2.151.1.1.1	Tableh3cRddcTable	not-accessible	current	This table describes the current status of redundancy groups.
1.3.6.1.4.1.2011.10.2.151.1.1.1.1	Rowh3cRddcEntry	not-accessible	current	The entry of h3cRddcEntry.
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.1	Columnh3cRddcGroupIdx	accessible-for-notify	current	Unique identifier of this redundancy group. 0 is an invalid value.
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.2	Columnh3cRddcGroupName	read-only	current	Unique identifier of this redundancy group.
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.3	Columnh3cRddcPreempTimeRemain	read-only	current	The redundancy group should not switch back immediately when a failover is recovered. The preempt delay timer is started for waiting the failover became believ…
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.4	Columnh3cRddcPreempTimeConfig	read-only	current	The current preempt delay time.
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.5	Columnh3cRddcHoldTimeRemain	read-only	current	To prevent frequent switchovers of the redundancy group, the hold-down timer started to keeping in a state for a fixed time. This object contains the current r…
1.3.6.1.4.1.2011.10.2.151.1.1.1.1.6	Columnh3cRddcHoldTimeConfig	read-only	current	The current hold-down time.
1.3.6.1.4.1.2011.10.2.151.1.1.2	Tableh3cRddcNodeTable	not-accessible	current	This table describes the current status of a redundancy group node.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1	Rowh3cRddcNodeEntry	not-accessible	current	The entry of h3cRddcNodeEntry.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.1	Columnh3cRddcNodeGroupIdx	not-accessible	current	Unique identifier of this redundancy group. 0 is an invalid value.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.2	Columnh3cRddcNodeId	not-accessible	current	Unique identifier of this redundancy group node. 0 is an invalid value.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.3	Columnh3cRddcNodeBindType	read-only	current	The bind type of this redundancy group node. The current version only supports binding chassis of an IRF device.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.4	Columnh3cRddcNodeBindInfo	read-only	current	The bind information of this redundancy group node. The current version only supports binding chassis of an IRF device. If the value of h3cRddcNodeBindType is …
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.5	Columnh3cRddcNodePriority	read-only	current	The priority of this redundancy group node. The higher the value, the greater the priority.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.6	Columnh3cRddcNodeWeight	read-only	current	The current weight of this redundancy group node. The max value is 255.
1.3.6.1.4.1.2011.10.2.151.1.1.2.1.7	Columnh3cRddcNodeStatus	read-only	current	The current status of this redundancy group node.
1.3.6.1.4.1.2011.10.2.151.1.2	Nodeh3cRddcTrapObjects
1.3.6.1.4.1.2011.10.2.151.1.2.1	Scalarh3cRddcNodeInfo	accessible-for-notify	current	This object contains node identification information where the switchover occurred.
1.3.6.1.4.1.2011.10.2.151.1.2.2	Scalarh3cRddcSwitchReason	accessible-for-notify	current	This object contains the cause for switchover.