MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

H3C-TRANSCEIVER-INFO-MIB

68 objects

The objects in this MIB module are used to display the information of transceiver on interface.

Imported Objects

HUAWEI-3COM-OID-MIB	h3cCommon
IF-MIB	ifIndex
SNMPv2-SMI	Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.10.2.70	Identityh3cTransceiver			The objects in this MIB module are used to display the information of transceiver on interface.
1.3.6.1.4.1.2011.10.2.70.1	Nodeh3cTransceiverInfoAdm
1.3.6.1.4.1.2011.10.2.70.1.1	Tableh3cTransceiverInfoTable	not-accessible	current	This table shows transceiver information on an interface.
1.3.6.1.4.1.2011.10.2.70.1.1.1	Rowh3cTransceiverInfoEntry	not-accessible	current	The entry of the h3cTransceiverInfoTable.
1.3.6.1.4.1.2011.10.2.70.1.1.1.1	Columnh3cTransceiverHardwareType	read-only	current	Hardware type of the interface, such as SM(single mode).
1.3.6.1.4.1.2011.10.2.70.1.1.1.2	Columnh3cTransceiverType	read-only	current	Type of the interface, such as SFP/XFP/GBIC.
1.3.6.1.4.1.2011.10.2.70.1.1.1.3	Columnh3cTransceiverWaveLength	read-only	current	Wave length of the interface, measured in nanometer. The unit is nm.
1.3.6.1.4.1.2011.10.2.70.1.1.1.4	Columnh3cTransceiverVendorName	read-only	current	Vendor name of the interface.
1.3.6.1.4.1.2011.10.2.70.1.1.1.5	Columnh3cTransceiverSerialNumber	read-only	current	Serial number of the interface.
1.3.6.1.4.1.2011.10.2.70.1.1.1.6	Columnh3cTransceiverFiberDiameterType	read-only	current	The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber …
1.3.6.1.4.1.2011.10.2.70.1.1.1.7	Columnh3cTransceiverTransferDistance	read-only	current	The maximum distance which the interface can transmit, measured in meter.
1.3.6.1.4.1.2011.10.2.70.1.1.1.8	Columnh3cTransceiverDiagnostic	read-only	current	Indicating the digital diagnostic monitoring function.
1.3.6.1.4.1.2011.10.2.70.1.1.1.9	Columnh3cTransceiverCurTXPower	read-only	current	Indicating the current transmitted power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.10	Columnh3cTransceiverMaxTXPower	read-only	current	Indicating the maximum transmitted power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.11	Columnh3cTransceiverMinTXPower	read-only	current	Indicating the minimum transmitted power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.12	Columnh3cTransceiverCurRXPower	read-only	current	Indicating the current received power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.13	Columnh3cTransceiverMaxRXPower	read-only	current	Indicating the maximum received power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.14	Columnh3cTransceiverMinRXPower	read-only	current	Indicating the minimum received power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.1.1.15	Columnh3cTransceiverTemperature	read-only	current	Indicating the current temperature. The unit is Celsius centigrade.
1.3.6.1.4.1.2011.10.2.70.1.1.1.16	Columnh3cTransceiverVoltage	read-only	current	Indicating the current voltage. The unit is in hundredths of V
1.3.6.1.4.1.2011.10.2.70.1.1.1.17	Columnh3cTransceiverBiasCurrent	read-only	current	Indicating the current bias electric current. The unit is in hundredths of mA
1.3.6.1.4.1.2011.10.2.70.1.1.1.18	Columnh3cTransceiverTempHiAlarm	read-only	current	Transceiver temperature high alarm threshold in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
1.3.6.1.4.1.2011.10.2.70.1.1.1.19	Columnh3cTransceiverTempLoAlarm	read-only	current	Transceiver temperature low alarm threshold in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
1.3.6.1.4.1.2011.10.2.70.1.1.1.20	Columnh3cTransceiverTempHiWarn	read-only	current	Transceiver temperature high warning threshold in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
1.3.6.1.4.1.2011.10.2.70.1.1.1.21	Columnh3cTransceiverTempLoWarn	read-only	current	Transceiver temperature low warning threshold in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
1.3.6.1.4.1.2011.10.2.70.1.1.1.22	Columnh3cTransceiverVccHiAlarm	read-only	current	Transceiver VCC high alarm threshold in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
1.3.6.1.4.1.2011.10.2.70.1.1.1.23	Columnh3cTransceiverVccLoAlarm	read-only	current	Transceiver VCC low alarm threshold in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
1.3.6.1.4.1.2011.10.2.70.1.1.1.24	Columnh3cTransceiverVccHiWarn	read-only	current	Transceiver VCC high warning threshold in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
1.3.6.1.4.1.2011.10.2.70.1.1.1.25	Columnh3cTransceiverVccLoWarn	read-only	current	Transceiver VCC low warning threshold in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
1.3.6.1.4.1.2011.10.2.70.1.1.1.26	Columnh3cTransceiverBiasHiAlarm	read-only	current	Transceiver bias high alarm threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.1.1.27	Columnh3cTransceiverBiasLoAlarm	read-only	current	Transceiver bias low alarm threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.1.1.28	Columnh3cTransceiverBiasHiWarn	read-only	current	Transceiver bias high warning threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.1.1.29	Columnh3cTransceiverBiasLoWarn	read-only	current	Transceiver bias low warning threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.1.1.30	Columnh3cTransceiverPwrOutHiAlarm	read-only	current	Transceiver transmit power high alarm threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.31	Columnh3cTransceiverPwrOutLoAlarm	read-only	current	Transceiver transmit power low alarm threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.32	Columnh3cTransceiverPwrOutHiWarn	read-only	current	Transceiver transmit power high warning threshold in tenths of microwatts As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.33	Columnh3cTransceiverPwrOutLoWarn	read-only	current	Transceiver transmit power low warning threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.34	Columnh3cTransceiverRcvPwrHiAlarm	read-only	current	Transceiver receive power high alarm threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.35	Columnh3cTransceiverRcvPwrLoAlarm	read-only	current	Transceiver receive power low alarm threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.36	Columnh3cTransceiverRcvPwrHiWarn	read-only	current	Transceiver receive power high warning threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.37	Columnh3cTransceiverRcvPwrLoWarn	read-only	current	Transceiver receive power low warning threshold in tenths of microwatts. As an example: 10000 is 1 milliwatt.
1.3.6.1.4.1.2011.10.2.70.1.1.1.38	Columnh3cTransceiverErrors	read-only	current	Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration m…
1.3.6.1.4.1.2011.10.2.70.1.1.1.39	Columnh3cTransceiverVendorOUI	read-only	current	Vendor OUI of the interface.
1.3.6.1.4.1.2011.10.2.70.1.1.1.40	Columnh3cTransceiverRevisionNumber	read-only	current	Revision number of the interface.
1.3.6.1.4.1.2011.10.2.70.1.1.1.41	Columnh3cTransceiverFrequency	read-only	current	The frequency of the current ITU channel on the connected transceiver. The unit is hundredths of THz.
1.3.6.1.4.1.2011.10.2.70.1.1.1.42	Columnh3cTransceiverActiveITUChannel	read-write	current	The index of the current ITU channel on the connected transceiver. The maximum index number for the ITU channel might vary by transceiver model. The value of t…
1.3.6.1.4.1.2011.10.2.70.1.1.1.43	Columnh3cTransceiverCurWaveErr	read-only	current	The current wavelength error of the current ITU channel on the connected transceiver. The unit is thousandths of nm.
1.3.6.1.4.1.2011.10.2.70.1.1.1.44	Columnh3cTransceiverWaveErrHiAlarm	read-only	current	The high wavelength error alarm threshold of the current ITU channel on the connected transceiver. The unit is thousandths of nm.
1.3.6.1.4.1.2011.10.2.70.1.1.1.45	Columnh3cTransceiverWaveErrLoAlarm	read-only	current	The low wavelength error alarm threshold of the current ITU channel on the connected transceiver. The unit is thousandths of nm.
1.3.6.1.4.1.2011.10.2.70.1.1.1.46	Columnh3cTransceiverCurFreqErr	read-only	current	The current frequency error of the current ITU channel on the connected transceiver. The unit is tenths of GHz.
1.3.6.1.4.1.2011.10.2.70.1.1.1.47	Columnh3cTransceiverFreqErrHiAlarm	read-only	current	The high frequency error alarm threshold of the current ITU channel on the connected transceiver. The unit is tenths of GHz.
1.3.6.1.4.1.2011.10.2.70.1.1.1.48	Columnh3cTransceiverFreqErrLoAlarm	read-only	current	The low frequency error alarm threshold of the current ITU channel on the connected transceiver. The unit is tenths of GHz.
1.3.6.1.4.1.2011.10.2.70.1.2	Tableh3cTransceiverChannelTable	not-accessible	current	This table provides statistics about transceiver with multi-channel.
1.3.6.1.4.1.2011.10.2.70.1.2.1	Rowh3cTransceiverChannelEntry	not-accessible	current	The entry of the h3cTransceiverChannelTable.
1.3.6.1.4.1.2011.10.2.70.1.2.1.1	Columnh3cTransceiverChannelIndex	not-accessible	current	The channel index of transceiver. Indicating one channel of the interface.
1.3.6.1.4.1.2011.10.2.70.1.2.1.2	Columnh3cTransceiverChannelCurTXPower	read-only	current	Indicating the current transmission power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.2.1.3	Columnh3cTransceiverChannelCurRXPower	read-only	current	Indicating the current received power. The unit is in hundredths of dBM.
1.3.6.1.4.1.2011.10.2.70.1.2.1.4	Columnh3cTransceiverChannelTemperature	read-only	current	Indicating the current temperature. The unit is Celsius centigrade.
1.3.6.1.4.1.2011.10.2.70.1.2.1.5	Columnh3cTransceiverChannelBiasCurrent	read-only	current	Indicating the current bias electric current. The unit is in hundredths of mA.
1.3.6.1.4.1.2011.10.2.70.1.2.1.6	Columnh3cTransceiverChannelBiasHiAm	read-only	current	Transceiver bias high alarm threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.2.1.7	Columnh3cTransceiverChannelBiasLoAm	read-only	current	Transceiver bias low alarm threshold in microamps.
1.3.6.1.4.1.2011.10.2.70.1.2.1.8	Columnh3cTransceiverChannelTXPwrHiAm	read-only	current	Transceiver transmit power high alarm threshold in tenths of microwatts.
1.3.6.1.4.1.2011.10.2.70.1.2.1.9	Columnh3cTransceiverChannelTXPwrLoAm	read-only	current	Transceiver transmit power low alarm threshold in tenths of microwatts.
1.3.6.1.4.1.2011.10.2.70.1.3	Tableh3cTransceiverITUChanTable	not-accessible	current	This table provides information about ITU channels supported on the transceiver that is connected to this interface.
1.3.6.1.4.1.2011.10.2.70.1.3.1	Rowh3cTransceiverITUChanEntry	not-accessible	current	The entry of the h3cTransceiverITUChanTable.
1.3.6.1.4.1.2011.10.2.70.1.3.1.1	Columnh3cTransceiverITUChanIdx	not-accessible	current	The index of the specified ITU channel on the transceiver that is connected to this interface.
1.3.6.1.4.1.2011.10.2.70.1.3.1.2	Columnh3cTransceiverITUChanFreq	read-only	current	The frequency of the specified ITU channel on the transceiver that is connected to this interface. The unit is hundredths of THz.
1.3.6.1.4.1.2011.10.2.70.1.3.1.3	Columnh3cTransceiverITUChanWaveLth	read-only	current	The wave length of the specified ITU channel on the transceiver that is connected to this interface. The unit is pm.