HDSL2-SHDSL-LINE-MIB
160 objects
This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4319; see the RFC itself for full legal notices.
Imported Objects
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.48 | Identityhdsl2ShdslMIB | This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is desig… | ||
| 1.3.6.1.2.1.10.48.0 | Nodehdsl2ShdslNotifications | |||
| 1.3.6.1.2.1.10.48.0.1 | Notificationhdsl2ShdslLoopAttenCrossing | current | This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the HD… | |
| 1.3.6.1.2.1.10.48.0.2 | Notificationhdsl2ShdslSNRMarginCrossing | current | This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the HDSL2/SHDSL se… | |
| 1.3.6.1.2.1.10.48.0.3 | Notificationhdsl2ShdslPerfESThresh | current | This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/exceeded for the HDSL2/SHDSL segm… | |
| 1.3.6.1.2.1.10.48.0.4 | Notificationhdsl2ShdslPerfSESThresh | current | This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the HDSL2/… | |
| 1.3.6.1.2.1.10.48.0.5 | Notificationhdsl2ShdslPerfCRCanomaliesThresh | current | This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the HDSL2/SH… | |
| 1.3.6.1.2.1.10.48.0.6 | Notificationhdsl2ShdslPerfLOSWSThresh | current | This notification indicates that the LOSW Seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the HDSL2/SHDSL segm… | |
| 1.3.6.1.2.1.10.48.0.7 | Notificationhdsl2ShdslPerfUASThresh | current | This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL… | |
| 1.3.6.1.2.1.10.48.0.8 | Notificationhdsl2ShdslSpanInvalidNumRepeaters | current | This notification indicates that a mismatch has been detected between the number of repeater/regenerator units configured for an HDSL2/SHDSL line via the hdsl2… | |
| 1.3.6.1.2.1.10.48.0.9 | Notificationhdsl2ShdslLoopbackFailure | current | This notification indicates that an endpoint maintenance loopback command failed for an HDSL2/SHDSL segment. | |
| 1.3.6.1.2.1.10.48.0.10 | Notificationhdsl2ShdslpowerBackoff | current | This notification indicates that the bit setting for powerBackoff in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.11 | Notificationhdsl2ShdsldeviceFault | current | This notification indicates that the bit setting for deviceFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.12 | Notificationhdsl2ShdsldcContinuityFault | current | This notification indicates that the bit setting for dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.13 | Notificationhdsl2ShdslconfigInitFailure | current | This notification indicates that the bit setting for configInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.14 | Notificationhdsl2ShdslprotocolInitFailure | current | This notification indicates that the bit setting for protocolInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.15 | Notificationhdsl2ShdslnoNeighborPresent | current | This notification indicates that the bit setting for noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed. | |
| 1.3.6.1.2.1.10.48.0.16 | Notificationhdsl2ShdslLocalPowerLoss | current | This notification indicates impending unit failure due to loss of local power (last gasp). | |
| 1.3.6.1.2.1.10.48.1 | Nodehdsl2ShdslMibObjects | |||
| 1.3.6.1.2.1.10.48.1.1 | Tablehdsl2ShdslSpanConfTable | not-accessible | current | This table supports overall configuration of HDSL2/SHDSL spans. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.10.48.1.1.1 | Rowhdsl2ShdslSpanConfEntry | not-accessible | current | An entry in the hdsl2ShdslSpanConfTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated H… |
| 1.3.6.1.2.1.10.48.1.1.1.1 | Columnhdsl2ShdslSpanConfNumRepeaters | read-write | current | This object provisions the number of repeaters/regenerators in this HDSL2/SHDSL span. |
| 1.3.6.1.2.1.10.48.1.1.1.2 | Columnhdsl2ShdslSpanConfProfile | read-write | current | This object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the ind… |
| 1.3.6.1.2.1.10.48.1.1.1.3 | Columnhdsl2ShdslSpanConfAlarmProfile | read-write | current | This object is a pointer to an alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referen… |
| 1.3.6.1.2.1.10.48.1.2 | Tablehdsl2ShdslSpanStatusTable | not-accessible | current | This table provides overall status information of HDSL2/SHDSL spans. This table contains live data from equipment. As such, it is NOT persistent. |
| 1.3.6.1.2.1.10.48.1.2.1 | Rowhdsl2ShdslSpanStatusEntry | not-accessible | current | An entry in the hdsl2ShdslSpanStatusTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated… |
| 1.3.6.1.2.1.10.48.1.2.1.1 | Columnhdsl2ShdslStatusNumAvailRepeaters | read-only | current | Contains the actual number of repeaters/regenerators discovered in this HDSL2/SHDSL span. |
| 1.3.6.1.2.1.10.48.1.2.1.2 | Columnhdsl2ShdslStatusMaxAttainableLineRate | read-only | current | Contains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon … |
| 1.3.6.1.2.1.10.48.1.2.1.3 | Columnhdsl2ShdslStatusActualLineRate | read-only | current | Contains the actual line rate in this HDSL2/SHDSL span. This SHOULD equal ifSpeed. This rate includes payload (user data) and any applicable framing overhead |
| 1.3.6.1.2.1.10.48.1.2.1.4 | Columnhdsl2ShdslStatusTransmissionModeCurrent | read-only | current | Contains the current Power Spectral Density (PSD) regional setting of the HDSL2/SHDSL span. |
| 1.3.6.1.2.1.10.48.1.2.1.5 | Columnhdsl2ShdslStatusMaxAttainablePayloadRate | read-only | current | Contains the maximum attainable payload (user data) line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving.… |
| 1.3.6.1.2.1.10.48.1.2.1.6 | Columnhdsl2ShdslStatusActualPayloadRate | read-only | current | Contains the actual line rate in this HDSL2/SHDSL span. Any framing overhead is not included. |
| 1.3.6.1.2.1.10.48.1.3 | Tablehdsl2ShdslInventoryTable | not-accessible | current | This table supports retrieval of unit inventory information available via the EOC from units in an HDSL2/SHDSL line. Entries in this table are dynamically crea… |
| 1.3.6.1.2.1.10.48.1.3.1 | Rowhdsl2ShdslInventoryEntry | not-accessible | current | An entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in an HDSL2/SHDSL line. It is indexed by the ifIndex of… |
| 1.3.6.1.2.1.10.48.1.3.1.1 | Columnhdsl2ShdslInvIndex | not-accessible | current | Each entry in this table corresponds to a physical element in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC. |
| 1.3.6.1.2.1.10.48.1.3.1.2 | Columnhdsl2ShdslInvVendorID | read-only | current | Vendor ID as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.3 | Columnhdsl2ShdslInvVendorModelNumber | read-only | current | Vendor model number as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.4 | Columnhdsl2ShdslInvVendorSerialNumber | read-only | current | Vendor serial number as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.5 | Columnhdsl2ShdslInvVendorEOCSoftwareVersion | read-only | current | Vendor EOC version as reported in a Discovery Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.6 | Columnhdsl2ShdslInvStandardVersion | read-only | current | Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.7 | Columnhdsl2ShdslInvVendorListNumber | read-only | current | Vendor list number as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.8 | Columnhdsl2ShdslInvVendorIssueNumber | read-only | current | Vendor issue number as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.9 | Columnhdsl2ShdslInvVendorSoftwareVersion | read-only | current | Vendor software version as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.10 | Columnhdsl2ShdslInvEquipmentCode | read-only | current | Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities. |
| 1.3.6.1.2.1.10.48.1.3.1.11 | Columnhdsl2ShdslInvVendorOther | read-only | current | Other vendor information as reported in an Inventory Response message. |
| 1.3.6.1.2.1.10.48.1.3.1.12 | Columnhdsl2ShdslInvTransmissionModeCapability | read-only | current | Contains the transmission mode capability of the SHDSL unit. |
| 1.3.6.1.2.1.10.48.1.4 | Tablehdsl2ShdslEndpointConfTable | not-accessible | current | This table supports configuration parameters for segment endpoints in an HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a pers… |
| 1.3.6.1.2.1.10.48.1.4.1 | Rowhdsl2ShdslEndpointConfEntry | not-accessible | current | An entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in an HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/… |
| 1.3.6.1.2.1.10.48.1.4.1.1 | Columnhdsl2ShdslEndpointSide | not-accessible | current | The side of the unit associated with this segment endpoint Network/Customer side convention. |
| 1.3.6.1.2.1.10.48.1.4.1.2 | Columnhdsl2ShdslEndpointWirePair | not-accessible | current | The wire pair of the modem associated with this segment endpoint as per the Hdsl2ShdslWirePair textual convention. |
| 1.3.6.1.2.1.10.48.1.4.1.3 | Columnhdsl2ShdslEndpointAlarmConfProfile | read-write | current | This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced… |
| 1.3.6.1.2.1.10.48.1.5 | Tablehdsl2ShdslEndpointCurrTable | not-accessible | current | This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by i… |
| 1.3.6.1.2.1.10.48.1.5.1 | Rowhdsl2ShdslEndpointCurrEntry | not-accessible | current | An entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the… |
| 1.3.6.1.2.1.10.48.1.5.1.1 | Columnhdsl2ShdslEndpointCurrAtn | read-only | current | The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message. |
| 1.3.6.1.2.1.10.48.1.5.1.2 | Columnhdsl2ShdslEndpointCurrSnrMgn | read-only | current | The current SNR margin for this endpoint as reported in a Status Response/SNR message. |
| 1.3.6.1.2.1.10.48.1.5.1.3 | Columnhdsl2ShdslEndpointCurrStatus | read-only | current | Contains the current state of the endpoint. This is a bit-map of possible conditions. The various bit positions are as follows: noDefect There are no defects o… |
| 1.3.6.1.2.1.10.48.1.5.1.4 | Columnhdsl2ShdslEndpointES | read-only | current | Count of Errored Seconds (ES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.2.1.10.48.1.5.1.5 | Columnhdsl2ShdslEndpointSES | read-only | current | Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted. |
| 1.3.6.1.2.1.10.48.1.5.1.6 | Columnhdsl2ShdslEndpointCRCanomalies | read-only | current | Count of CRC anomalies on this endpoint since the xU was last restarted. |
| 1.3.6.1.2.1.10.48.1.5.1.7 | Columnhdsl2ShdslEndpointLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted. |
| 1.3.6.1.2.1.10.48.1.5.1.8 | Columnhdsl2ShdslEndpointUAS | read-only | current | Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted. |
| 1.3.6.1.2.1.10.48.1.5.1.9 | Columnhdsl2ShdslEndpointCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.10 | Columnhdsl2ShdslEndpointCurr15MinES | read-only | current | Count of Errored Seconds (ES) in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.11 | Columnhdsl2ShdslEndpointCurr15MinSES | read-only | current | Count of Severely Errored Seconds (SES) in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.12 | Columnhdsl2ShdslEndpointCurr15MinCRCanomalies | read-only | current | Count of CRC anomalies in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.13 | Columnhdsl2ShdslEndpointCurr15MinLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.14 | Columnhdsl2ShdslEndpointCurr15MinUAS | read-only | current | Count of Unavailable Seconds (UAS) in the current 15-minute interval. |
| 1.3.6.1.2.1.10.48.1.5.1.15 | Columnhdsl2ShdslEndpointCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.2.1.10.48.1.5.1.16 | Columnhdsl2ShdslEndpointCurr1DayES | read-only | current | Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.48.1.5.1.17 | Columnhdsl2ShdslEndpointCurr1DaySES | read-only | current | Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.48.1.5.1.18 | Columnhdsl2ShdslEndpointCurr1DayCRCanomalies | read-only | current | Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.48.1.5.1.19 | Columnhdsl2ShdslEndpointCurr1DayLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.48.1.5.1.20 | Columnhdsl2ShdslEndpointCurr1DayUAS | read-only | current | Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.48.1.5.1.21 | Columnhdsl2ShdslEndpointCurrTipRingReversal | read-only | current | This object indicates the state of the tip/ring for the wire pair. |
| 1.3.6.1.2.1.10.48.1.5.1.22 | Columnhdsl2ShdslEndpointCurrActivationState | read-only | current | This object indicates the activation or training state of the wire pair. |
| 1.3.6.1.2.1.10.48.1.6 | Tablehdsl2Shdsl15MinIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.2.1.10.48.1.6.1 | Rowhdsl2Shdsl15MinIntervalEntry | not-accessible | current | An entry in the hdsl2Shdsl15MinIntervalTable. |
| 1.3.6.1.2.1.10.48.1.6.1.1 | Columnhdsl2Shdsl15MinIntervalNumber | not-accessible | current | Performance Data Interval number. Interval 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.2.1.10.48.1.6.1.2 | Columnhdsl2Shdsl15MinIntervalES | read-only | current | Count of Errored Seconds (ES) during the interval. |
| 1.3.6.1.2.1.10.48.1.6.1.3 | Columnhdsl2Shdsl15MinIntervalSES | read-only | current | Count of Severely Errored Seconds (SES) during the interval. |
| 1.3.6.1.2.1.10.48.1.6.1.4 | Columnhdsl2Shdsl15MinIntervalCRCanomalies | read-only | current | Count of CRC anomalies during the interval. |
| 1.3.6.1.2.1.10.48.1.6.1.5 | Columnhdsl2Shdsl15MinIntervalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the interval. |
| 1.3.6.1.2.1.10.48.1.6.1.6 | Columnhdsl2Shdsl15MinIntervalUAS | read-only | current | Count of Unavailable Seconds (UAS) during the interval. |
| 1.3.6.1.2.1.10.48.1.7 | Tablehdsl2Shdsl1DayIntervalTable | not-accessible | current | This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NO… |
| 1.3.6.1.2.1.10.48.1.7.1 | Rowhdsl2Shdsl1DayIntervalEntry | not-accessible | current | An entry in the hdsl2Shdsl1DayIntervalTable. |
| 1.3.6.1.2.1.10.48.1.7.1.1 | Columnhdsl2Shdsl1DayIntervalNumber | not-accessible | current | History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. |
| 1.3.6.1.2.1.10.48.1.7.1.2 | Columnhdsl2Shdsl1DayIntervalMoniSecs | read-only | current | The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval dur… |
| 1.3.6.1.2.1.10.48.1.7.1.3 | Columnhdsl2Shdsl1DayIntervalES | read-only | current | Count of Errored Seconds (ES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.2.1.10.48.1.7.1.4 | Columnhdsl2Shdsl1DayIntervalSES | read-only | current | Count of Severely Errored Seconds (SES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.2.1.10.48.1.7.1.5 | Columnhdsl2Shdsl1DayIntervalCRCanomalies | read-only | current | Count of CRC anomalies during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.2.1.10.48.1.7.1.6 | Columnhdsl2Shdsl1DayIntervalLOSWS | read-only | current | Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.2.1.10.48.1.7.1.7 | Columnhdsl2Shdsl1DayIntervalUAS | read-only | current | Count of Unavailable Seconds (UAS) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs. |
| 1.3.6.1.2.1.10.48.1.8 | Tablehdsl2ShdslEndpointMaintTable | not-accessible | current | This table supports maintenance operations (e.g., loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As… |
| 1.3.6.1.2.1.10.48.1.8.1 | Rowhdsl2ShdslEndpointMaintEntry | not-accessible | current | An entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint and is indexed by the ifIndex of the HDSL2/SHDSL line, the Un… |
| 1.3.6.1.2.1.10.48.1.8.1.1 | Columnhdsl2ShdslMaintLoopbackConfig | read-write | current | This object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatu… |
| 1.3.6.1.2.1.10.48.1.8.1.2 | Columnhdsl2ShdslMaintTipRingReversal | read-only | current | This object indicates the state of the tip/ring pair at the associated segment endpoint. |
| 1.3.6.1.2.1.10.48.1.8.1.3 | Columnhdsl2ShdslMaintPowerBackOff | read-write | current | This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode. |
| 1.3.6.1.2.1.10.48.1.8.1.4 | Columnhdsl2ShdslMaintSoftRestart | read-write | current | This object enables the manager to trigger a soft restart of the modem at the associated segment endpoint. The manager may only set this object to the 'restart… |
| 1.3.6.1.2.1.10.48.1.9 | Tablehdsl2ShdslUnitMaintTable | not-accessible | current | This table supports maintenance operations for units in a HDSL2/SHDSL line. Entries in this table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.10.48.1.9.1 | Rowhdsl2ShdslUnitMaintEntry | not-accessible | current | An entry in the hdsl2ShdslUnitMaintTable. Each entry corresponds to a single unit and is indexed by the ifIndex of the HDSL2/SHDSL line and the UnitId of the a… |
| 1.3.6.1.2.1.10.48.1.9.1.1 | Columnhdsl2ShdslMaintLoopbackTimeout | read-write | current | This object configures the timeout value for loopbacks initiated at segments endpoints contained in the associated unit. A value of 0 disables the timeout. |
| 1.3.6.1.2.1.10.48.1.9.1.2 | Columnhdsl2ShdslMaintUnitPowerSource | read-only | current | This object indicates the DC power source being used by the associated unit. |
| 1.3.6.1.2.1.10.48.1.10 | Tablehdsl2ShdslSpanConfProfileTable | not-accessible | current | This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintain… |
| 1.3.6.1.2.1.10.48.1.10.1 | Rowhdsl2ShdslSpanConfProfileEntry | not-accessible | current | Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a … |
| 1.3.6.1.2.1.10.48.1.10.1.1 | Columnhdsl2ShdslSpanConfProfileName | not-accessible | current | This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanCo… |
| 1.3.6.1.2.1.10.48.1.10.1.2 | Columnhdsl2ShdslSpanConfWireInterface | read-create | current | This object configures the two-wire or optional four-wire, six-wire, or eight-wire operation for SHDSL lines. |
| 1.3.6.1.2.1.10.48.1.10.1.3 | Columnhdsl2ShdslSpanConfMinLineRate | read-create | current | This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any appli… |
| 1.3.6.1.2.1.10.48.1.10.1.4 | Columnhdsl2ShdslSpanConfMaxLineRate | read-create | current | This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any appli… |
| 1.3.6.1.2.1.10.48.1.10.1.5 | Columnhdsl2ShdslSpanConfPSD | read-create | current | This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for … |
| 1.3.6.1.2.1.10.48.1.10.1.6 | Columnhdsl2ShdslSpanConfTransmissionMode | read-create | current | This object specifies the regional setting for the SHDSL line. |
| 1.3.6.1.2.1.10.48.1.10.1.7 | Columnhdsl2ShdslSpanConfRemoteEnabled | read-create | current | This object enables/disables support for remote management of the units in an SHDSL line from the STU-R via the EOC. |
| 1.3.6.1.2.1.10.48.1.10.1.8 | Columnhdsl2ShdslSpanConfPowerFeeding | read-create | current | This object enables/disables support for optional power feeding in an SHDSL line. |
| 1.3.6.1.2.1.10.48.1.10.1.9 | Columnhdsl2ShdslSpanConfCurrCondTargetMarginDown | read-create | current | This object specifies the downstream current condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the ac… |
| 1.3.6.1.2.1.10.48.1.10.1.10 | Columnhdsl2ShdslSpanConfWorstCaseTargetMarginDown | read-create | current | This object specifies the downstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SN… |
| 1.3.6.1.2.1.10.48.1.10.1.11 | Columnhdsl2ShdslSpanConfCurrCondTargetMarginUp | read-create | current | This object specifies the upstream current-condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actu… |
| 1.3.6.1.2.1.10.48.1.10.1.12 | Columnhdsl2ShdslSpanConfWorstCaseTargetMarginUp | read-create | current | This object specifies the upstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR.… |
| 1.3.6.1.2.1.10.48.1.10.1.13 | Columnhdsl2ShdslSpanConfUsedTargetMargins | read-create | current | Indicates whether a target SNR margin is enabled or disabled. This is a bit-map of possible settings. The various bit positions are as follows: currCondDown - … |
| 1.3.6.1.2.1.10.48.1.10.1.14 | Columnhdsl2ShdslSpanConfReferenceClock | read-create | current | This object configures the clock reference for the STU-C in an SHDSL Line. |
| 1.3.6.1.2.1.10.48.1.10.1.15 | Columnhdsl2ShdslSpanConfLineProbeEnable | read-create | current | This object enables/disables support for Line Probe of the units in an SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the bes… |
| 1.3.6.1.2.1.10.48.1.10.1.16 | Columnhdsl2ShdslSpanConfProfileRowStatus | read-create | current | This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpan… |
| 1.3.6.1.2.1.10.48.1.11 | Tablehdsl2ShdslEndpointAlarmConfProfileTable | not-accessible | current | This table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints. This table MUST be maintained in a persistent manner. |
| 1.3.6.1.2.1.10.48.1.11.1 | Rowhdsl2ShdslEndpointAlarmConfProfileEntry | not-accessible | current | Each entry corresponds to a single alarm configuration profile. Each profile contains a set of parameters for setting alarm thresholds for various performance … |
| 1.3.6.1.2.1.10.48.1.11.1.1 | Columnhdsl2ShdslEndpointAlarmConfProfileName | not-accessible | current | This object is the unique index associated with this profile. |
| 1.3.6.1.2.1.10.48.1.11.1.2 | Columnhdsl2ShdslEndpointThreshLoopAttenuation | read-create | current | This object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, an hdsl2Shd… |
| 1.3.6.1.2.1.10.48.1.11.1.3 | Columnhdsl2ShdslEndpointThreshSNRMargin | read-create | current | This object configures the SNR margin alarm threshold. When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold, a hdsl2Shd… |
| 1.3.6.1.2.1.10.48.1.11.1.4 | Columnhdsl2ShdslEndpointThreshES | read-create | current | This object configures the threshold for the number of Errored Seconds (ES) within any given 15-minute performance data collection interval. If the value of Er… |
| 1.3.6.1.2.1.10.48.1.11.1.5 | Columnhdsl2ShdslEndpointThreshSES | read-create | current | This object configures the threshold for the number of Severely Errored Seconds (SES) within any given 15-minute performance data collection interval. If the v… |
| 1.3.6.1.2.1.10.48.1.11.1.6 | Columnhdsl2ShdslEndpointThreshCRCanomalies | read-create | current | This object configures the threshold for the number of CRC anomalies within any given 15-minute performance data collection interval. If the value of CRC anoma… |
| 1.3.6.1.2.1.10.48.1.11.1.7 | Columnhdsl2ShdslEndpointThreshLOSWS | read-create | current | This object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds within any given 15-minute performance data collection interval. If the… |
| 1.3.6.1.2.1.10.48.1.11.1.8 | Columnhdsl2ShdslEndpointThreshUAS | read-create | current | This object configures the threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance data collection interval. If the value … |
| 1.3.6.1.2.1.10.48.1.11.1.9 | Columnhdsl2ShdslEndpointAlarmConfProfileRowStatus | read-create | current | This object controls creation/deletion of the associated entry in this table as per the semantics of RowStatus. If an active entry is referenced in either hdsl… |
| 1.3.6.1.2.1.10.48.3 | Nodehdsl2ShdslConformance | |||
| 1.3.6.1.2.1.10.48.3.1 | Nodehdsl2ShdslGroups | |||
| 1.3.6.1.2.1.10.48.3.1.1 | Grouphdsl2ShdslSpanConfGroup | current | This group supports objects for configuring span-related parameters for HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.2 | Grouphdsl2ShdslSpanStatusGroup | current | This group supports objects for retrieving span-related status for HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.3 | Grouphdsl2ShdslInventoryShdslGroup | current | This group supports objects for retrieving SHDSL-specific inventory information. | |
| 1.3.6.1.2.1.10.48.3.1.4 | Grouphdsl2ShdslSpanShdslStatusGroup | current | This group supports objects for retrieving SHDSL-specific span-related status. | |
| 1.3.6.1.2.1.10.48.3.1.5 | Grouphdsl2ShdslInventoryGroup | current | This group supports objects that provide unit inventory information about the units in HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.6 | Grouphdsl2ShdslEndpointConfGroup | current | This group supports objects for configuring parameters for segment endpoints in HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.7 | Grouphdsl2ShdslEndpointCurrGroup | current | This group supports objects that provide current status and performance measurements relating to segment endpoints in HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.8 | Grouphdsl2Shdsl15MinIntervalGroup | current | This group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 15-minute intervals. | |
| 1.3.6.1.2.1.10.48.3.1.9 | Grouphdsl2Shdsl1DayIntervalGroup | current | This group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 1-day intervals. | |
| 1.3.6.1.2.1.10.48.3.1.10 | Grouphdsl2ShdslMaintenanceGroup | current | This group supports objects that provide support for maintenance actions for HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.11 | Grouphdsl2ShdslEndpointAlarmConfGroup | current | This group supports objects that allow configuration of alarm thresholds for various performance parameters for HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.12 | Grouphdsl2ShdslNotificationGroup | current | This group supports notifications of significant conditions associated with HDSL2/SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.13 | Grouphdsl2ShdslSpanConfProfileGroup | current | This group supports objects that constitute configuration profiles for configuring span-related parameters in SHDSL lines. | |
| 1.3.6.1.2.1.10.48.3.1.14 | Grouphdsl2ShdslWirePairGroup | current | This group supports objects that provide the status of SHDSL-specific wire pairs. | |
| 1.3.6.1.2.1.10.48.3.1.15 | Grouphdsl2ShdslPayloadRateGroup | current | This group supports objects for retrieving payload rates that exclude any framing overhead. | |
| 1.3.6.1.2.1.10.48.3.2 | Nodehdsl2ShdslCompliances | |||
| 1.3.6.1.2.1.10.48.3.2.1 | Compliancehdsl2ShdslLineMibCompliance | deprecated | The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl. **** This co… | |
| 1.3.6.1.2.1.10.48.3.2.2 | Compliancehdsl2GshdslbisLineMibCompliance | current | The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl.bis. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hdsl2Shdsl1DayIntervalCount | Gauge32 | current | A counter associated with interface performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this gauge is equal to the value of the current day gauge, as defined in a compani… |
| Hdsl2ShdslClockReferenceType | INTEGER { localClk(1), networkClk(2), dataOrNetworkClk(3), dataClk(4) } | current | The various STU-C symbol clock references for the HDSL2/SHDSL span, represented as an enumeration. |
| Hdsl2ShdslPerfCurrDayCount | Gauge32 | current | A gauge associated with interface performance measurements in a current 1-day (24 hour) measurement interval. The value of this gauge starts at zero at the beginning of an interval and is increased when associated event… |
| Hdsl2ShdslPerfIntervalThreshold | Unsigned32 (0..900) | current | This convention defines a range of values that may be set in a fault threshold alarm control. As the number of seconds in a 15-minute interval numbers at most 900, objects of this type may have a range of 0...900, where… |
| Hdsl2ShdslPerfTimeElapsed | Unsigned32 (0..86399) | current | The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock or the addition of a leap second, the current i… |
| Hdsl2ShdslTransmissionModeType | BITS { region1(0), region2(1) } | current | Contains the regional setting of the HDSL2/SHDSL span, represented as a bit-map of possible settings. The various bit positions are as follows: Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A. 2 regio… |
| Hdsl2ShdslUnitId | INTEGER { xtuC(1), xtuR(2), xru1(3), xru2(4), xru3(5), xru4(6), xru5(7), xru6(8), xru7(9), xru8(10) } | current | This is the unique identification for all units in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC. |
| Hdsl2ShdslUnitSide | INTEGER { networkSide(1), customerSide(2) } | current | This is the referenced side of an HDSL2/SHDSL unit - Network or Customer side. The side facing the Network is the Network side, while the side facing the Customer is the Customer side. |
| Hdsl2ShdslWirePair | INTEGER { wirePair1(1), wirePair2(2), wirePair3(3), wirePair4(4) } | current | This is the referenced pair of wires in an HDSL2/SHDSL segment. HDSL2 only supports a single pair (wirePair1 or two wire), SHDSL lines support an optional second pair (wirePair2 or four wire), and G.shdsl.bis support an… |