MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HH3C-EPON-FB-MIB

11 objects

The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.

Imported Objects

HH3C-OID-MIB	hh3cEpon
SNMPv2-SMI	Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC	RowStatus

OID	Name	Access	Status	Description
1.3.6.1.4.1.25506.2.42.6	Identityhh3cEponFBMibObjects			The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.
1.3.6.1.4.1.25506.2.42.6.1	Nodehh3cEponFBMIB
1.3.6.1.4.1.25506.2.42.6.1.1	Tablehh3cEponFBMIBTable	not-accessible	current	This table defines several optical fiber-backup system parameters.
1.3.6.1.4.1.25506.2.42.6.1.1.1	Rowhh3cEponFBMIBEntry	not-accessible	current	The entry of hh3cEponFBMIBTable.
1.3.6.1.4.1.25506.2.42.6.1.1.1.1	Columnhh3cEponFBGroupIndex	not-accessible	current	The EPON fiber-backup group ID.
1.3.6.1.4.1.25506.2.42.6.1.1.1.2	Columnhh3cEponFBGroupRowStatus	read-create	current	This object allows entry to be created and deleted from the hh3cEponFBMIBTable.
1.3.6.1.4.1.25506.2.42.6.1.1.1.3	Columnhh3cEponFBMasterPort	read-create	current	OLT port ifindex of the fiber-backup group. Use it to set or get the group master port.
1.3.6.1.4.1.25506.2.42.6.1.1.1.4	Columnhh3cEponFBSlavePort	read-create	current	OLT port ifindex of the fiber-backup group. Use it to set or get the group slave port. hh3cEponFBSlavePort must be set after hh3cEponFBMasterPort.
1.3.6.1.4.1.25506.2.42.6.1.1.1.5	Columnhh3cEponFBMasterPortStatus	read-only	current	The master port status of the fiber-backup group. The active state indicates that the port's role is master, the olt chip is right and the optical module is in…
1.3.6.1.4.1.25506.2.42.6.1.1.1.6	Columnhh3cEponFBSlavePortStatus	read-only	current	The slave port status of the fiber-backup group. The ready state indicates that the port's role is slave, the olt chip is right and optical module is inserted.…
1.3.6.1.4.1.25506.2.42.6.1.1.1.7	Columnhh3cEponFBSwitchover	read-create	current	Switch the fiber backup group's two port manually. The group must has two ports and the value of hh3cEponFBSlavePortStatus must be ready before Switchover. aft…