MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HH3C-LswMix-MIB

11 objects

No module-level DESCRIPTION found.

Imported Objects

HH3C-LSW-DEV-ADM-MIB	hh3cLswFrameIndex hh3cLswSlotIndex
HH3C-OID-MIB	hh3clswCommon
SNMPv2-SMI	MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE

OID	Name	Access	Status	Description
1.3.6.1.4.1.25506.8.35.17	Identityhh3cLswMix
1.3.6.1.4.1.25506.8.35.17.1	Scalarhh3cLswLastSwitchDate	read-only	current	This object indicates the date of the most recent change to the mpu(Main Processing Unit).
1.3.6.1.4.1.25506.8.35.17.2	Scalarhh3cLswLastSwitchTime	read-only	current	This object indicates the time of the most recent change to the mpu.
1.3.6.1.4.1.25506.8.35.17.3	Scalarhh3cLswMpuSwitchsNum	read-only	current	This object indicates the total times of the mpu switched since the system start up.
1.3.6.1.4.1.25506.8.35.17.4	Scalarhh3cLswMpuSwitch	read-write	current	Setting this object will immediately switch the standby mpu to master mpu. Read is not supported.
1.3.6.1.4.1.25506.8.35.17.5	Tablehh3cLswXSlotTable	not-accessible	current	The source main table.
1.3.6.1.4.1.25506.8.35.17.5.1	Rowhh3cLswXSlotEntry	not-accessible	current	An entry in the source main table.
1.3.6.1.4.1.25506.8.35.17.5.1.1	Columnhh3cLswMainCardBoardStatus	read-only	current	The value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state …
1.3.6.1.4.1.25506.8.35.17.5.1.2	Columnhh3cLswCrossBarStatus	read-only	current	The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossb…
1.3.6.1.4.1.25506.8.35.17.10	Nodehh3csMixTrapMib
1.3.6.1.4.1.25506.8.35.17.10.1	Notificationhh3cSlaveSwitchOver		current	An hh3cSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed.