HH3C-NQA-MIB
245 objects
The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.
Imported Objects
| DISMAN-PING-MIB | pingCtlDescr pingCtlEntry pingCtlOwnerIndex pingCtlTargetAddress pingCtlTargetAddressType pingCtlTestName pingCtlType |
| HH3C-OID-MIB | hh3cRhw |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.8.3 | Identityhh3cNqa | The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt. | ||
| 1.3.6.1.4.1.25506.8.3.1 | Nodehh3cNqaObjects | |||
| 1.3.6.1.4.1.25506.8.3.1.1 | Scalarhh3cNqaMIBVersion | read-only | current | Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' |
| 1.3.6.1.4.1.25506.8.3.1.2 | Tablehh3cNqaCtlTable | not-accessible | current | Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. |
| 1.3.6.1.4.1.25506.8.3.1.2.1 | Rowhh3cNqaCtlEntry | not-accessible | current | Defines an entry in the hh3cNqaCtlTable. The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.1 | Columnhh3cNqaCtlTargetPort | read-create | current | The destination port that may be used by udpEcho, tcpConnect and jitter probes. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.2 | Columnhh3cNqaCtlSourcePort | read-create | current | The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.3 | Columnhh3cNqaCtlTTL | read-create | current | Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.4 | Columnhh3cNqaCtlJitterAdminInterval | read-create | current | Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.5 | Columnhh3cNqaCtlJitterAdminNumPackets | read-create | current | Packet number that specifies how many packets will be sent in one jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.6 | Columnhh3cNqaCtlHttpOperationType | read-create | current | Http operation type: get, post or raw. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.7 | Columnhh3cNqaCtlHttpOperationString | read-create | current | Http operation string. For example, if the http operation type is get, the string will be url, home page and http version. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.8 | Columnhh3cNqaCtlFtpOperationType | read-create | current | Ftp operation type. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.9 | Columnhh3cNqaCtlFtpUsername | read-create | current | Ftp username. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.10 | Columnhh3cNqaCtlFtpPassword | read-create | current | Ftp password. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.11 | Columnhh3cNqaCtlFtpOperationString | read-create | current | Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.12 | Columnhh3cNqaCtlVPNInstance | read-create | current | VPN name by which system finds route in the specified VPN to send NQA probe packets. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.13 | Columnhh3cNqaCtlHistoryKeptTime | read-create | current | To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped. |
| 1.3.6.1.4.1.25506.8.3.1.2.1.14 | Columnhh3cNqaCtlHistoryEnable | read-create | current | |
| 1.3.6.1.4.1.25506.8.3.1.2.1.15 | Columnhh3cNqaCtlICPIFAdvFactor | read-create | current | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning… |
| 1.3.6.1.4.1.25506.8.3.1.2.1.16 | Columnhh3cNqaCtlCodecType | read-create | current | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| 1.3.6.1.4.1.25506.8.3.1.3 | Tablehh3cNqaResultsTable | not-accessible | current | Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in … |
| 1.3.6.1.4.1.25506.8.3.1.3.1 | Rowhh3cNqaResultsEntry | not-accessible | current | The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.1 | Columnhh3cNqaResultsRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.2 | Columnhh3cNqaResultsRttTimeouts | read-only | current | The number of times that a NQA probe failed because the probe timed out. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.3 | Columnhh3cNqaResultsRttBusies | read-only | current | The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. Th… |
| 1.3.6.1.4.1.25506.8.3.1.3.1.4 | Columnhh3cNqaResultsRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.5 | Columnhh3cNqaResultsRttDrops | read-only | current | The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.6 | Columnhh3cNqaResultsRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.7 | Columnhh3cNqaResultsRttStatsErrors | read-only | current | The number of some other errors. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.8 | Columnhh3cNqaResultsMaxDelaySD | read-only | current | The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In … |
| 1.3.6.1.4.1.25506.8.3.1.3.1.9 | Columnhh3cNqaResultsMaxDelayDS | read-only | current | The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitte… |
| 1.3.6.1.4.1.25506.8.3.1.3.1.10 | Columnhh3cNqaResultsLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent… |
| 1.3.6.1.4.1.25506.8.3.1.3.1.11 | Columnhh3cNqaResultsPacketLateArrival | read-only | current | The value of this object indicates the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.12 | Columnhh3cNqaResultsRttSum | read-only | current | The sum of round trip time. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.13 | Columnhh3cNqaResultsNumOfDelaySD | read-only | current | The number of delay from source to destination that are successfully measured. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.14 | Columnhh3cNqaResultsMinDelaySD | read-only | current | The minimum of all one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.15 | Columnhh3cNqaResultsSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.16 | Columnhh3cNqaResultsSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.17 | Columnhh3cNqaResultsNumOfDelayDS | read-only | current | The number of delay from destination to source that are successfully measured. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.18 | Columnhh3cNqaResultsMinDelayDS | read-only | current | The minimum of all one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.19 | Columnhh3cNqaResultsSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.3.1.20 | Columnhh3cNqaResultsSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.4 | Tablehh3cNqaJitterStatsTable | not-accessible | current | Statistics table for latest jitter activity. |
| 1.3.6.1.4.1.25506.8.3.1.4.1 | Rowhh3cNqaJitterStatsEntry | not-accessible | current | An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.1 | Columnhh3cNqaJitterStatsNumOfRTT | read-only | current | The number of received destination device responses with which jitter test can reach round-trip time. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.2 | Columnhh3cNqaJitterStatsMinOfPositivesSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.3 | Columnhh3cNqaJitterStatsMaxOfPositivesSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.4 | Columnhh3cNqaJitterStatsNumOfPositivesSD | read-only | current | The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets s… |
| 1.3.6.1.4.1.25506.8.3.1.4.1.5 | Columnhh3cNqaJitterStatsSumOfPositivesSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.6 | Columnhh3cNqaJitterStatsSum2PositivesSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.7 | Columnhh3cNqaJitterStatsMinOfNegativesSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.8 | Columnhh3cNqaJitterStatsMaxOfNegativesSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.9 | Columnhh3cNqaJitterStatsNumOfNegativesSD | read-only | current | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent fro… |
| 1.3.6.1.4.1.25506.8.3.1.4.1.10 | Columnhh3cNqaJitterStatsSumOfNegativesSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative j… |
| 1.3.6.1.4.1.25506.8.3.1.4.1.11 | Columnhh3cNqaJitterStatsSum2NegativesSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.12 | Columnhh3cNqaJitterStatsMinOfPositivesDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.13 | Columnhh3cNqaJitterStatsMaxOfPositivesDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.14 | Columnhh3cNqaJitterStatsNumOfPositivesDS | read-only | current | The number that records positive jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.15 | Columnhh3cNqaJitterStatsSumOfPositivesDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.16 | Columnhh3cNqaJitterStatsSum2PositivesDS | read-only | current | The value of time that records the sum of square of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.17 | Columnhh3cNqaJitterStatsMinOfNegativesDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.18 | Columnhh3cNqaJitterStatsMaxOfNegativesDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.19 | Columnhh3cNqaJitterStatsNumOfNegativesDS | read-only | current | The number that records negative jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.20 | Columnhh3cNqaJitterStatsSumOfNegativesDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.21 | Columnhh3cNqaJitterStatsSum2NegativesDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.22 | Columnhh3cNqaJitterStatsPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.23 | Columnhh3cNqaJitterStatsPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.24 | Columnhh3cNqaJitterStatsAvePositivesSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.25 | Columnhh3cNqaJitterStatsAveNegativesSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.26 | Columnhh3cNqaJitterStatsAvePositivesDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.27 | Columnhh3cNqaJitterStatsAveNegativesDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.28 | Columnhh3cNqaJitterStatsPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.29 | Columnhh3cNqaJitterStatsOperOfICPIF | read-only | current | The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.30 | Columnhh3cNqaJitterStatsOperOfMOS | read-only | current | The MOS (Mean Opinion Score) value for the latest jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.31 | Columnhh3cNqaJitterStatsAveSD | read-only | current | The value of time that records the average jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.32 | Columnhh3cNqaJitterStatsAveDS | read-only | current | The value of time that records the average jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.4.1.33 | Columnhh3cNqaJitterStatsLostPacketPermillage | read-only | current | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 100, that means source device only had received 900 packets pe… |
| 1.3.6.1.4.1.25506.8.3.1.5 | Scalarhh3cNqaAgentEnable | read-write | current | Enable NQA agent function. |
| 1.3.6.1.4.1.25506.8.3.1.6 | Tablehh3cNqaTcpServerTable | not-accessible | current | A table which contains the status of NQA tcp server configuration information. |
| 1.3.6.1.4.1.25506.8.3.1.6.1 | Rowhh3cNqaTcpServerEntry | not-accessible | current | A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server p… |
| 1.3.6.1.4.1.25506.8.3.1.6.1.1 | Columnhh3cNqaTcpServerIpAddress | not-accessible | current | Tcp server's ip address. |
| 1.3.6.1.4.1.25506.8.3.1.6.1.2 | Columnhh3cNqaTcpServerPort | not-accessible | current | Tcp server's port number. |
| 1.3.6.1.4.1.25506.8.3.1.6.1.3 | Columnhh3cNqaTcpServerRowStatus | read-create | current | hh3cNqaTcpServerIpAddress and hh3cNqaTcpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.25506.8.3.1.7 | Tablehh3cNqaUdpServerTable | not-accessible | current | Status of NQA udp server configuration information. |
| 1.3.6.1.4.1.25506.8.3.1.7.1 | Rowhh3cNqaUdpServerEntry | not-accessible | current | This entry includes not only the udp server ip address but also the udp server udp port. |
| 1.3.6.1.4.1.25506.8.3.1.7.1.1 | Columnhh3cNqaUdpServerIpAddress | not-accessible | current | Udp server's ip address. |
| 1.3.6.1.4.1.25506.8.3.1.7.1.2 | Columnhh3cNqaUdpServerPort | not-accessible | current | Udp server's port number. |
| 1.3.6.1.4.1.25506.8.3.1.7.1.3 | Columnhh3cNqaUdpServerRowStatus | read-create | current | hh3cNqaUdpServerIpAddress and hh3cNqaUdpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.25506.8.3.1.8 | Scalarhh3cNqaServerEnable | read-write | current | Enable NQA server function. |
| 1.3.6.1.4.1.25506.8.3.1.9 | Scalarhh3cNqaStatsMaxGroupNumber | read-only | current | The maximum number saved per group. The maximum value of hh3cNqaCtlStatisticsGroupNumber can not exceed the value of this object. |
| 1.3.6.1.4.1.25506.8.3.1.10 | Tablehh3cNqaStatisticsCtlTable | not-accessible | current | Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations… |
| 1.3.6.1.4.1.25506.8.3.1.10.1 | Rowhh3cNqaStatisticsCtlEntry | not-accessible | current | Defines an entry in the hh3cNqaStatisticsCtlTable. The hh3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hh3cNqaStatisticsCtlTabl… |
| 1.3.6.1.4.1.25506.8.3.1.10.1.1 | Columnhh3cNqaCtlStatisticsInterval | read-create | current | Statistic information will be calculated after the time that is the value of hh3cNqaCtlStatisticsInterval. |
| 1.3.6.1.4.1.25506.8.3.1.10.1.2 | Columnhh3cNqaCtlStatisticsGroupNumber | read-create | current | The value of this object indicates the number of group saved. The length of this object is from 1 to hh3cNqaStatsMaxGroupNumber. |
| 1.3.6.1.4.1.25506.8.3.1.10.1.3 | Columnhh3cNqaCtlStatisticsKeptTime | read-create | current | To indicate how long the statistic information will be saved after the test stops. |
| 1.3.6.1.4.1.25506.8.3.1.10.1.4 | Columnhh3cNqaCtlBeginTime | read-create | current | Time at which the type-specified test will start. |
| 1.3.6.1.4.1.25506.8.3.1.10.1.5 | Columnhh3cNqaCtlLifeTime | read-create | current | To indicate how long the type-specified test will last. |
| 1.3.6.1.4.1.25506.8.3.1.11 | Tablehh3cNqaStatisticsResultsTable | not-accessible | current | Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations… |
| 1.3.6.1.4.1.25506.8.3.1.11.1 | Rowhh3cNqaStatisticsResultsEntry | not-accessible | current | Defines an entry in the hh3cNqaStatisticsResultsTable. The hh3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hh3cNqaStatistic… |
| 1.3.6.1.4.1.25506.8.3.1.11.1.1 | Columnhh3cNqaStatResIndex | not-accessible | current | An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hh3cNqaStatResIndex values at… |
| 1.3.6.1.4.1.25506.8.3.1.11.1.2 | Columnhh3cNqaStatResIpTargetAddressType | read-only | current | This object indicates the type of address stored in the corresponding hh3cNqaStatResIpTargetAddress object. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.3 | Columnhh3cNqaStatResIpTargetAddress | read-only | current | This object represent the host address to be used at a remote host for performing a network analysis operation. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.4 | Columnhh3cNqaStatResMinRtt | read-only | current | The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.5 | Columnhh3cNqaStatResMaxRtt | read-only | current | The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.6 | Columnhh3cNqaStatResAverageRtt | read-only | current | The average NQA probe round-trip-time (RTT). |
| 1.3.6.1.4.1.25506.8.3.1.11.1.7 | Columnhh3cNqaStatResProbeResponses | read-only | current | The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.8 | Columnhh3cNqaStatResSentProbes | read-only | current | The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.9 | Columnhh3cNqaStatResRttSumOfSquares | read-only | current | This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been rece… |
| 1.3.6.1.4.1.25506.8.3.1.11.1.10 | Columnhh3cNqaStatResStartTime | read-only | current | This object contains the start time of the statistic. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.11 | Columnhh3cNqaStatResInterval | read-only | current | This object contains the interval between two times of statistic. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.12 | Columnhh3cNqaStatResRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.13 | Columnhh3cNqaStatResRttTimeouts | read-only | current | The number of times that a probe failed because the probe timed out. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.14 | Columnhh3cNqaStatResRttBusies | read-only | current | The number of times that a NQA probe failed because errors related to sockets. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.15 | Columnhh3cNqaStatResRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.16 | Columnhh3cNqaStatResRttDrops | read-only | current | The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.17 | Columnhh3cNqaStatResRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.18 | Columnhh3cNqaStatResRttErrors | read-only | current | The number of other errors. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.19 | Columnhh3cNqaStatResLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent pack… |
| 1.3.6.1.4.1.25506.8.3.1.11.1.20 | Columnhh3cNqaStatResPacketLateArrival | read-only | current | The value of this object reflects the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.21 | Columnhh3cNqaStatResRttSum | read-only | current | This object contains the sum for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have… |
| 1.3.6.1.4.1.25506.8.3.1.11.1.22 | Columnhh3cNqaStatResNumOfDelaySD | read-only | current | The number of one way times from source to destination that are successfully measured. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.23 | Columnhh3cNqaStatResMinDelaySD | read-only | current | The minimum one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.24 | Columnhh3cNqaStatResMaxDelaySD | read-only | current | The maximum one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.25 | Columnhh3cNqaStatResSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.26 | Columnhh3cNqaStatResSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.27 | Columnhh3cNqaStatResNumOfDelayDS | read-only | current | The number of one way times from destination to source that are successfully measured. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.28 | Columnhh3cNqaStatResMinDelayDS | read-only | current | The minimum one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.29 | Columnhh3cNqaStatResMaxDelayDS | read-only | current | The maximum one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.30 | Columnhh3cNqaStatResSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.31 | Columnhh3cNqaStatResSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.11.1.32 | Columnhh3cNqaStatResLostPacketPermillage | read-only | current | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 100, that means source device only had received 900 packets pe… |
| 1.3.6.1.4.1.25506.8.3.1.12 | Tablehh3cNqaGroupStatsJitterTable | not-accessible | current | Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hh3cNqaCtlStatisticsInterval. The first two index iden… |
| 1.3.6.1.4.1.25506.8.3.1.12.1 | Rowhh3cNqaGroupStatsJitterEntry | not-accessible | current | An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.1 | Columnhh3cNqaStatJitterIndex | not-accessible | current | An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hh3cNqaSt… |
| 1.3.6.1.4.1.25506.8.3.1.12.1.2 | Columnhh3cNqaStatJitterMinOfPosSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.3 | Columnhh3cNqaStatJitterMaxOfPosSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.4 | Columnhh3cNqaStatJitterNumOfPosSD | read-only | current | The total number of positive jitters from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.5 | Columnhh3cNqaStatJitterSumOfPosSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.6 | Columnhh3cNqaStatJitterSumOfSquarePosSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.7 | Columnhh3cNqaStatJitterMinOfNegSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.8 | Columnhh3cNqaStatJitterMaxOfNegSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.9 | Columnhh3cNqaStatJitterNumOfNegSD | read-only | current | The total number of negative jitters from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.10 | Columnhh3cNqaStatJitterSumOfNegSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.11 | Columnhh3cNqaStatJitterSumOfSquareNegSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.12 | Columnhh3cNqaStatJitterMinOfPosDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.13 | Columnhh3cNqaStatJitterMaxOfPosDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.14 | Columnhh3cNqaStatJitterNumOfPosDS | read-only | current | The total number of positive jitters from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.15 | Columnhh3cNqaStatJitterSumOfPosDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.16 | Columnhh3cNqaStatJitterSumOfSquarePosDS | read-only | current | The value of time that records the sum of square of positive jitter values destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.17 | Columnhh3cNqaStatJitterMinOfNegDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.18 | Columnhh3cNqaStatJitterMaxOfNegDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.19 | Columnhh3cNqaStatJitterNumOfNegDS | read-only | current | The total number of negative jitters from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.20 | Columnhh3cNqaStatJitterSumOfNegDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.21 | Columnhh3cNqaStatJitterSumOfSquareNegDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.22 | Columnhh3cNqaStatJitterPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.23 | Columnhh3cNqaStatJitterPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.24 | Columnhh3cNqaStatJitterAvePosSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.25 | Columnhh3cNqaStatJitterAveNegSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.26 | Columnhh3cNqaStatJitterAvePosDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.27 | Columnhh3cNqaStatJitterAveNegDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.28 | Columnhh3cNqaStatJitterPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.29 | Columnhh3cNqaStatJitterMaxOfICPIF | read-only | current | The maximum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.30 | Columnhh3cNqaStatJitterMinOfICPIF | read-only | current | The minimum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.31 | Columnhh3cNqaStatJitterMaxOfMOS | read-only | current | The maximum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.32 | Columnhh3cNqaStatJitterMinOfMOS | read-only | current | The minimum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.33 | Columnhh3cNqaStatJitterAveSD | read-only | current | The value of time that records the average jitter value from source to destination. |
| 1.3.6.1.4.1.25506.8.3.1.12.1.34 | Columnhh3cNqaStatJitterAveDS | read-only | current | The value of time that records the average jitter value from destination to source. |
| 1.3.6.1.4.1.25506.8.3.1.13 | Tablehh3cNqaReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.25506.8.3.1.13.1 | Rowhh3cNqaReactionEntry | not-accessible | current | Defines an entry in the hh3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The third index e… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.1 | Columnhh3cNqaReactOwnerIndex | accessible-for-notify | current | The first index of hh3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an exist… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.2 | Columnhh3cNqaReactTestName | accessible-for-notify | current | The second index of hh3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an existe… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.3 | Columnhh3cNqaReactItemIndex | accessible-for-notify | current | The third index of hh3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test. |
| 1.3.6.1.4.1.25506.8.3.1.13.1.4 | Columnhh3cNqaReactCheckedElement | read-create | current | A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hh3cNqajitter. 'jitterOwdSD': one way delay fro… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.5 | Columnhh3cNqaReactThresholdUpperLimit | read-create | current | This object defines an administrative upper-threshold value for hh3cNqaReactCheckedElement. The value of this object is zero if hh3cNqaReactCheckedElement is s… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.6 | Columnhh3cNqaReactThresholdLowerLimit | read-create | current | This object defines an administrative lower-threshold value for hh3cNqaReactCheckedElement. The value of hh3cNqaReactThresholdLowerLimit should be equal or les… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.7 | Columnhh3cNqaReactThresholdType | read-create | current | This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.8 | Columnhh3cNqaReactThresholdConsecNum | read-create | current | This object defines a consecutive threshold limit. The value is zero when hh3cNqaReactThresholdType is not 'consecutive'. |
| 1.3.6.1.4.1.25506.8.3.1.13.1.9 | Columnhh3cNqaReactThresholdAccumNum | read-create | current | This object defines an accumulative threshold limit. The value is zero when the hh3cNqaReactThresholdType is not 'accumulative'. |
| 1.3.6.1.4.1.25506.8.3.1.13.1.10 | Columnhh3cNqaReactActionType | read-create | current | Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap … |
| 1.3.6.1.4.1.25506.8.3.1.13.1.11 | Columnhh3cNqaReactCurrentStatus | read-only | current | Specifies the current status of this reaction entry: invalid - The status of the reaction entry is unknown. overThreshold - The status of the reaction entry is… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.12 | Columnhh3cNqaReactRowStatus | read-create | current | This object allows entries to be created and deleted in the hh3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configura… |
| 1.3.6.1.4.1.25506.8.3.1.13.1.13 | Columnhh3cNqaReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.25506.8.3.1.13.1.14 | Columnhh3cNqaReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.25506.8.3.1.14 | Tablehh3cNqaStatisticsReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.25506.8.3.1.14.1 | Rowhh3cNqaStatisticsReactionEntry | not-accessible | current | Defines an entry in the hh3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The thi… |
| 1.3.6.1.4.1.25506.8.3.1.14.1.1 | Columnhh3cNqaStatReactOwnerIndex | not-accessible | current | The first index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. |
| 1.3.6.1.4.1.25506.8.3.1.14.1.2 | Columnhh3cNqaStatReactTestName | not-accessible | current | The second index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. |
| 1.3.6.1.4.1.25506.8.3.1.14.1.3 | Columnhh3cNqaStatReactIndex | not-accessible | current | The third index of hh3cNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation… |
| 1.3.6.1.4.1.25506.8.3.1.14.1.4 | Columnhh3cNqaStatReactItemIndex | not-accessible | current | The forth index of hh3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test |
| 1.3.6.1.4.1.25506.8.3.1.14.1.5 | Columnhh3cNqaStatReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.25506.8.3.1.14.1.6 | Columnhh3cNqaStatReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.25506.8.3.1.15 | Tablehh3cNqaTcpServerExtendTable | not-accessible | current | A table which contains the status of extended NQA TCP server configuration information. |
| 1.3.6.1.4.1.25506.8.3.1.15.1 | Rowhh3cNqaTcpServerExtendEntry | not-accessible | current | A table which contains the status of extended NQA TCP server configuration information. This entry includes the TCP server IP address, port, VPN name and DSFie… |
| 1.3.6.1.4.1.25506.8.3.1.15.1.1 | Columnhh3cNqaTcpServerExtIpAddress | not-accessible | current | TCP server's IP address. |
| 1.3.6.1.4.1.25506.8.3.1.15.1.2 | Columnhh3cNqaTcpServerExtPort | not-accessible | current | TCP server's port number. |
| 1.3.6.1.4.1.25506.8.3.1.15.1.3 | Columnhh3cNqaTcpServerExtVPNType | not-accessible | current | TCP server's VPN instance type. |
| 1.3.6.1.4.1.25506.8.3.1.15.1.4 | Columnhh3cNqaTcpServerExtVPNInstance | not-accessible | current | TCP server's VPN name.If the NQA server listens on the public network, the value of hh3cNqaTcpServerExtVPNType must be public(1) and the value of this object c… |
| 1.3.6.1.4.1.25506.8.3.1.15.1.5 | Columnhh3cNqaTcpServerExtDSField | read-create | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the probe. The DS Field is defined as the Type of S… |
| 1.3.6.1.4.1.25506.8.3.1.15.1.6 | Columnhh3cNqaTcpServerExtRowStatus | read-create | current | hh3cNqaTcpServerIpAddress, hh3cNqaTcpServerPort, hh3cNqaTcpServerExtVPNType and hh3cNqaTcpServerVPNInstance must be set during a creation operation. |
| 1.3.6.1.4.1.25506.8.3.1.16 | Tablehh3cNqaUdpServerExtendTable | not-accessible | current | Status of extended NQA UDP server configuration information. |
| 1.3.6.1.4.1.25506.8.3.1.16.1 | Rowhh3cNqaUdpServerExtendEntry | not-accessible | current | A table which contains the status of extended NQA UDP server configuration information. This entry includes the UDP server IP address, port, VPN name and DSFie… |
| 1.3.6.1.4.1.25506.8.3.1.16.1.1 | Columnhh3cNqaUdpServerExtIpAddress | not-accessible | current | UDP server's IP address. |
| 1.3.6.1.4.1.25506.8.3.1.16.1.2 | Columnhh3cNqaUdpServerExtPort | not-accessible | current | UDP server's port number. |
| 1.3.6.1.4.1.25506.8.3.1.16.1.3 | Columnhh3cNqaUdpServerExtVPNType | not-accessible | current | UDP server's VPN instance type. |
| 1.3.6.1.4.1.25506.8.3.1.16.1.4 | Columnhh3cNqaUdpServerExtVPNInstance | not-accessible | current | UDP server's VPN name.If the NQA server listens on the public network, the value of hh3cNqaUdpServerExtVPNType must be public(1) and the value of this object c… |
| 1.3.6.1.4.1.25506.8.3.1.16.1.5 | Columnhh3cNqaUdpServerExtDSField | read-create | current | Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the probe. The DS Field is defined as the Type of S… |
| 1.3.6.1.4.1.25506.8.3.1.16.1.6 | Columnhh3cNqaUdpServerExtRowStatus | read-create | current | hh3cNqaUdpServerIpAddress, hh3cNqaUdpServerPort, hh3cNqaUdpServerExtVPNType and hh3cNqaUdpServerVPNInstance must be set during a creation operation. |
| 1.3.6.1.4.1.25506.8.3.2 | Nodehh3cNqaImplementationTypeDomains | |||
| 1.3.6.1.4.1.25506.8.3.2.1 | Identityhh3cNqaUdpEcho | current | Indicates that an implementation is using the UDP based echo server. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtlSourcePort need to be set, while in the ping… | |
| 1.3.6.1.4.1.25506.8.3.2.2 | Identityhh3cNqaTcpconnect | current | Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtl… | |
| 1.3.6.1.4.1.25506.8.3.2.3 | Identityhh3cNqajitter | current | Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance… | |
| 1.3.6.1.4.1.25506.8.3.2.4 | Identityhh3cNqaHttp | current | Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP S… | |
| 1.3.6.1.4.1.25506.8.3.2.5 | Identityhh3cNqadlsw | current | Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the res… | |
| 1.3.6.1.4.1.25506.8.3.2.6 | Identityhh3cNqadhcp | current | Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown … | |
| 1.3.6.1.4.1.25506.8.3.2.7 | Identityhh3cNqaftp | current | Indicates that an implementation is using tcp packet for ftp connect and data transfer. | |
| 1.3.6.1.4.1.25506.8.3.2.8 | Identityhh3cNqaTwampLight | current | Indicates that a measurement for two-way network quality through UDP packets. The type only supports sending traps. | |
| 1.3.6.1.4.1.25506.8.3.2.9 | Identityhh3cNqaArp | current | Indicates that an implementation is using the Address Resolution Protocol (ARP) test facility. The type only supports IPv4 network. | |
| 1.3.6.1.4.1.25506.8.3.2.10 | Identityhh3cNqaHttp2 | current | Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP2 data download from a particular HTTP … | |
| 1.3.6.1.4.1.25506.8.3.3 | Nodehh3cNqaNotifications | |||
| 1.3.6.1.4.1.25506.8.3.3.1 | Notificationhh3cNqaProbeTimeOverThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.2 | Notificationhh3cNqaJitterRTTOverThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.3 | Notificationhh3cNqaProbeFailure | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.4 | Notificationhh3cNqaJitterPacketLoss | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.5 | Notificationhh3cNqaJitterSDOverThreshold | current | The SD means the jitter values from source to destination. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the w… | |
| 1.3.6.1.4.1.25506.8.3.3.6 | Notificationhh3cNqaJitterDSOverThreshold | current | The DS means the jitter values from destination to source. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the w… | |
| 1.3.6.1.4.1.25506.8.3.3.7 | Notificationhh3cNqaICPIFOverThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.8 | Notificationhh3cNqaMOSOverThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The … | |
| 1.3.6.1.4.1.25506.8.3.3.9 | Notificationhh3cNqaJitterOverThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is above threshold or below threshold. 1. … | |
| 1.3.6.1.4.1.25506.8.3.3.10 | Notificationhh3cNqaProbeTimeAboveThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes to 'overThreshold', 'invalid' or 'overUpperThreshold'. The change may occur when the monito… | |
| 1.3.6.1.4.1.25506.8.3.3.11 | Notificationhh3cNqaProbeTimeBelowThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes to 'belowThreshold' or 'belowLowerThreshold' from a threshold-crossing state. The below thr… | |
| 1.3.6.1.4.1.25506.8.3.3.12 | Notificationhh3cNqaProbeFailAboveThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes to 'overThreshold', 'invalid' or 'overUpperThreshold'. The change may occur when the monito… | |
| 1.3.6.1.4.1.25506.8.3.3.13 | Notificationhh3cNqaProbeFailBelowThreshold | current | It is generated when the value of hh3cNqaReactCurrentStatus changes to 'belowThreshold' or 'belowLowerThreshold' from a threshold-crossing state. The below thr… | |
| 1.3.6.1.4.1.25506.8.3.3.14 | Notificationhh3cNqaJitterOwdSDNotification | current | The SD means the delay values from source to destination. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the wa… | |
| 1.3.6.1.4.1.25506.8.3.3.15 | Notificationhh3cNqaJitterOwdDSNotification | current | The DS means the delay values from destination to source. It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the wa… | |
| 1.3.6.1.4.1.25506.8.3.3.16 | Notificationhh3cNqaTestFailure | current | It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold. The over threshold situ… | |
| 1.3.6.1.4.1.25506.8.3.3.17 | Notificationhh3cNqaTestResultChange | current | It is generated when the test result changed. This notification is valid only when hh3cNqaReactActionType is 'trapOnly'and pingCtlType of the test is pingIcmpE… | |
| 1.3.6.1.4.1.25506.8.3.4 | Nodehh3cNqaNotificationsV2 | |||
| 1.3.6.1.4.1.25506.8.3.4.0 | Nodehh3cNqaNotification | |||
| 1.3.6.1.4.1.25506.8.3.4.0.1 | Notificationhh3cNqaScheduleFailure | current | It is generated upon failure to start the scheduled NQA operation. | |
| 1.3.6.1.4.1.25506.8.3.4.0.2 | Notificationhh3cNqaServerFailure | current | It is generated upon failure to enable the NQA server. | |
| 1.3.6.1.4.1.25506.8.3.4.1 | Nodehh3cNqaNotificationObjects | |||
| 1.3.6.1.4.1.25506.8.3.4.1.1 | Scalarhh3cNqaOwnerIndex | accessible-for-notify | current | The owner of the test. hh3cNqaOwnerIndex and hh3cNqaTestName identify an existing test. |
| 1.3.6.1.4.1.25506.8.3.4.1.2 | Scalarhh3cNqaTestName | accessible-for-notify | current | The name of the test.hh3cNqaOwnerIndex and hh3cNqaTestName identify an existing test. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VpnInstanceType | INTEGER { public(1), vpn(2) } | current | A value that represents a type of VPN instance. public(1) Public network. vpn(2) Private network. |