HH3C-NTP-MIB
90 objects
This MIB provides mechanisms to monitor a NTP server.
Imported Objects
| HH3C-OID-MIB | hh3cRhw |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.8.22 | Identityhh3cNTP | This MIB provides mechanisms to monitor a NTP server. | ||
| 1.3.6.1.4.1.25506.8.22.1 | Nodehh3cNTPSystemMIB | |||
| 1.3.6.1.4.1.25506.8.22.1.1 | Nodehh3cNTPSystemMIBObjects | |||
| 1.3.6.1.4.1.25506.8.22.1.1.1 | Scalarhh3cNTPSysLeap | read-only | current | Leap Indicator (LI): This is a two-bit code warning of an impending leap second to be inserted/deleted in the last minute of the current day, with bit 0 and bi… |
| 1.3.6.1.4.1.25506.8.22.1.1.2 | Scalarhh3cNTPSysStratum | read-only | current | This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio… |
| 1.3.6.1.4.1.25506.8.22.1.1.3 | Scalarhh3cNTPSysPrecision | read-only | current | Precision : This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the n… |
| 1.3.6.1.4.1.25506.8.22.1.1.4 | Scalarhh3cNTPSysRootdelay | read-only | current | Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet… |
| 1.3.6.1.4.1.25506.8.22.1.1.5 | Scalarhh3cNTPSysRootdispersion | read-only | current | Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.25506.8.22.1.1.6 | Scalarhh3cNTPSysRefid | read-only | current | Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary ref… |
| 1.3.6.1.4.1.25506.8.22.1.1.7 | Scalarhh3cNTPSysReftime | read-only | current | Reference Timestamp : This is the local time, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the v… |
| 1.3.6.1.4.1.25506.8.22.1.1.8 | Scalarhh3cNTPSysPoll | read-only | current | Poll Interval : This is a signed integer indicating the minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of s… |
| 1.3.6.1.4.1.25506.8.22.1.1.9 | Scalarhh3cNTPSysPeer | read-only | obsolete | This is a selector identifying the current synchronization source. Usually this will be a pointer to a structure containing the peer variables. The special val… |
| 1.3.6.1.4.1.25506.8.22.1.1.10 | Scalarhh3cNTPSysState | read-only | current | This is a integer indicating the state of local clock. |
| 1.3.6.1.4.1.25506.8.22.1.1.11 | Scalarhh3cNTPSysOffset | read-only | current | The offset of two clocks is the time difference between them, in milliseconds. |
| 1.3.6.1.4.1.25506.8.22.1.1.12 | Scalarhh3cNTPSysDrift | read-only | current | Real clocks exhibit some variation in skew (second derivative of offset with time), which is called drift. |
| 1.3.6.1.4.1.25506.8.22.1.1.13 | Scalarhh3cNTPSysCompliance | read-only | current | This is a string indicating the system error. |
| 1.3.6.1.4.1.25506.8.22.1.1.14 | Scalarhh3cNTPSysClock | read-only | current | This is the current local time, in timestamp format. Local time is derived from the hardware clock of the particular machine and increments at intervals depend… |
| 1.3.6.1.4.1.25506.8.22.1.1.15 | Scalarhh3cNTPSysStabil | read-only | current | This is a indicating that stability of a clock is how well it can maintain a constant frequency. |
| 1.3.6.1.4.1.25506.8.22.1.1.16 | Scalarhh3cNTPSysAuthenticate | read-write | current | This is a integer indicating that system support authentication. |
| 1.3.6.1.4.1.25506.8.22.1.1.17 | Scalarhh3cNTPSysPollSec | read-write | current | PollSec Interval : This is a integer indicating the minimum interval between transmitted messages. For instance, a value of six indicates a minimum interval of… |
| 1.3.6.1.4.1.25506.8.22.1.1.18 | Scalarhh3cNTPSysClockSec | read-only | current | This is the current local time, in integer format. Local time is derived from the hardware clock of the particular machine and increments at intervals dependin… |
| 1.3.6.1.4.1.25506.8.22.1.1.19 | Scalarhh3cNTPServerIP | read-write | current | The NTP server ip address. It must be a unicast address, rather than a broadcast address, a multicast address or the IP address of the local clock. To delete a… |
| 1.3.6.1.4.1.25506.8.22.1.1.20 | Scalarhh3cNTPSysSrcPeer | read-only | current | This is a selector identifying the current synchronization source. Usually this will be a unsigned integer containing the peer variables. The special value 0 i… |
| 1.3.6.1.4.1.25506.8.22.1.1.21 | Scalarhh3cNTPSysOldServerIP | accessible-for-notify | current | The Old NTP server ip address. |
| 1.3.6.1.4.1.25506.8.22.1.1.22 | Scalarhh3cNTPSysSrcVpnName | accessible-for-notify | current | The NTP server VPN Name. |
| 1.3.6.1.4.1.25506.8.22.1.1.23 | Scalarhh3cNTPSysOldSrcVpnName | accessible-for-notify | current | The Old NTP server VPN Name. |
| 1.3.6.1.4.1.25506.8.22.1.1.24 | Scalarhh3cNTPSysMaxDynamicSessions | accessible-for-notify | current | Maximum number of NTP dynamic sessions. |
| 1.3.6.1.4.1.25506.8.22.1.1.25 | Scalarhh3cNTPSysMaxSessions | accessible-for-notify | current | Maximum number of NTP sessions. |
| 1.3.6.1.4.1.25506.8.22.1.1.26 | Scalarhh3cNTPSysOldStratum | accessible-for-notify | current | The old the stratum level of the local clock. |
| 1.3.6.1.4.1.25506.8.22.1.1.27 | Scalarhh3cNTPSysTimeOffsetThres | accessible-for-notify | current | Time offset alarm threshold, in milliseconds. |
| 1.3.6.1.4.1.25506.8.22.1.1.28 | Scalarhh3cNTPSysTimeOffsetLimit | accessible-for-notify | current | Clock synchronization offset threshold, in milliseconds. |
| 1.3.6.1.4.1.25506.8.22.1.2 | Nodehh3cNTPSystemMIBTraps | |||
| 1.3.6.1.4.1.25506.8.22.1.2.0 | Nodehh3cNTPSystemMIBTrapPrefix | |||
| 1.3.6.1.4.1.25506.8.22.1.2.0.1 | Notificationhh3cNTPSysStateChangeTrap | current | The trap is generated when The NTP local clock state changed. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.2 | Notificationhh3cNTPSysPeerChangeTrap | current | The trap is generated when The peer specified by NTP has changed. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.3 | Notificationhh3cNTPDynSessionLimit | current | The trap is generated when The number of NTP dynamic sessions has reached the upper limit. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.4 | Notificationhh3cNTPDynSessionLimitResume | current | The trap is generated when The NTP dynamic session number below the limit. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.5 | Notificationhh3cNTPSessionLimit | current | The trap is generated when the number of NTP sessions reaches the upper limit. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.6 | Notificationhh3cNTPSessionLimitResume | current | The trap is generated when the number of NTP sessions drops below the limit. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.7 | Notificationhh3cNTPSynchronizationLost | current | The trap is generated when the local clock loses synchronization with the NTP server. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.8 | Notificationhh3cNTPSynchronizationResume | current | The trap is generated when the local clock resumes synchronization with the NTP server. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.9 | Notificationhh3cNTPSysStratumChange | current | The trap is generated when the stratum level of the local clock changes. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.10 | Notificationhh3cNTPTimeOffsetThresExceed | current | The trap is generated when the time offset between the clock source and the client reaches the threshold. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.11 | Notificationhh3cNTPTimeOffsetThresResume | current | The trap is generated when the time offset between the clock source and the client drops below the threshold. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.12 | Notificationhh3cNTPTimeOffsetLimit | current | The trap is generated when the time offset between the clock source and the client over the upper limit for clock synchronization. The client will not synchron… | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.13 | Notificationhh3cNTPTimeOffsetLimitResume | current | The trap is generated when the time offset between the clock source and the client drops below the upper limit for clock synchronization. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.14 | Notificationhh3cNTPSysLeapChangeTrap | current | The trap is generated when System Leap Indicator changed after clock update. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.15 | Notificationhh3cNTPServerAbnormal | current | The trap is generated when NTP server state went abnormal. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.16 | Notificationhh3cNTPServerNormal | current | The trap is generated when NTP server state returned to normal. | |
| 1.3.6.1.4.1.25506.8.22.1.2.0.17 | Notificationhh3cNTPStepSetTimeFailed | current | The trap is generated upon failure to set system time in the one-step adjustment process. | |
| 1.3.6.1.4.1.25506.8.22.2 | Nodehh3cNTPPeerMIB | |||
| 1.3.6.1.4.1.25506.8.22.2.1 | Nodehh3cNTPPeerMIBObjects | |||
| 1.3.6.1.4.1.25506.8.22.2.1.1 | Tablehh3cNTPPeerTable | not-accessible | current | This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1 | Rowhh3cNTPPeerEntry | not-accessible | current | Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.1 | Columnhh3cNTPPeerConfig | read-only | current | This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.2 | Columnhh3cNTPPeerAuthenable | read-only | current | This is a bit indicating that system support authentication. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.3 | Columnhh3cNTPPeerAuthentic | read-only | current | This is a bit indicating that message pass authentication which is authentic. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.4 | Columnhh3cNTPPeerRemAdr | not-accessible | current | The IP address of the peer. When creating a new association, a value for this object should be set before the row is made active. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.5 | Columnhh3cNTPPeerRemPort | read-only | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.6 | Columnhh3cNTPPeerLocAdr | read-only | current | The IP address of the local host. Multi-homing can be supported using this object. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.7 | Columnhh3cNTPPeerLocPort | read-only | current | The UDP port number on which the local host receives NTP messages. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.8 | Columnhh3cNTPPeerLeap | read-only | current | This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.9 | Columnhh3cNTPPeerHMode | not-accessible | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.10 | Columnhh3cNTPPeerStratum | read-only | current | This is a integer indicating the stratum level of the peer clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-25… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.11 | Columnhh3cNTPPeerPPoll | read-only | current | The interval at which the peer polls the local host. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.12 | Columnhh3cNTPPeerHPoll | read-only | current | The interval at which the local host polls the peer. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.13 | Columnhh3cNTPPeerPrecision | read-only | current | This is a signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.14 | Columnhh3cNTPPeerRootDelay | read-only | current | This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in millisec… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.15 | Columnhh3cNTPPeerRootDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.16 | Columnhh3cNTPPeerRefId | read-only | current | The reference identifier of the peer. This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (pr… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.17 | Columnhh3cNTPPeerRefTime | read-only | current | This is the local time at the peer, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is ze… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.18 | Columnhh3cNTPPeerOrg | read-only | current | This is the local time, in timestamp format, at the peer when it's latest NTP message was sent. If the peer becomes unreachable the value is set to zero |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.19 | Columnhh3cNTPPeerRec | read-only | current | This is the local time, in timestamp format, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.20 | Columnhh3cNTPPeerXmt | read-only | current | This is the local time, in timestamp format, at which the NTP message departed the sender. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.21 | Columnhh3cNTPPeerReach | read-only | current | This is a shift register of NTP.WINDOW bits used to determine the reach ability status of the peer, with bits entering from the least significant (rightmost) e… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.22 | Columnhh3cNTPPeerValid | read-only | current | This is an integer counter indicating the valid samples remaining in the filter register. It is used to determine the reach ability state and when the poll int… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.23 | Columnhh3cNTPPeerTimer | read-only | current | This is an integer counter used to control the interval of transmitted NTP messages from the local host to the peer. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.24 | Columnhh3cNTPPeerDelay | read-only | current | This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in millise… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.25 | Columnhh3cNTPPeerOffset | read-only | current | This is a signed, fixed-point number indicating the offset of the peer clock relative to the local clock, in milliseconds. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.26 | Columnhh3cNTPPeerJitter | read-only | current | This is an indicating that peer of sample Variance |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.27 | Columnhh3cNTPPeerDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the local clock over the network path between them, in milliseco… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.28 | Columnhh3cNTPPeerKeyId | read-only | current | This is an unsigned integer identifying the cryptographic key used to generate the message-authentication code. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.29 | Columnhh3cNTPPeerFiltDelay | read-only | current | Round-trip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. This variable can take on both positive and… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.30 | Columnhh3cNTPPeerFiltOffset | read-only | current | The offset of the peer clock relative to the local clock in milliseconds. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.31 | Columnhh3cNTPPeerFiltError | read-only | current | The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.32 | Columnhh3cNTPPeerPMode | read-only | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.33 | Columnhh3cNTPPeerReceived | read-only | current | The number of received messages. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.34 | Columnhh3cNTPPeerSent | read-only | current | The number of send messages. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.35 | Columnhh3cNTPPeerFlash | read-only | current | The information about the message. |
| 1.3.6.1.4.1.25506.8.22.2.1.1.1.36 | Columnhh3cNTPPeerRowStatus | read-create | current | The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can … |