MIB Viewer

HH3C-POWER-ETH-EXT-MIB

133 objects
Description.
Imported Objects
HH3C-OID-MIBhh3cCommon
POWER-ETHERNET-MIBpethMainPseGroupIndex pethPsePortDetectionStatus pethPsePortGroupIndex pethPsePortIndex
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.25506.2.14Identityhh3cPowerEthernetExtDescription.
1.3.6.1.4.1.25506.2.14.1Tablehh3cPsePortTablenot-accessiblecurrentThe indexing scheme is taken form that used by the IETF Power MIB. The same indexing scheme is used to give continuity in behaviour between that standard and t…
1.3.6.1.4.1.25506.2.14.1.1Rowhh3cPsePortEntrynot-accessiblecurrentThe pethPsePortGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. G…
1.3.6.1.4.1.25506.2.14.1.1.2Columnhh3cPsePortFaultDescriptionread-writecurrentThe object supports the fault category of the IETF Power MIB [1] pethPsePortDetectionStatus object. A textual description containing more information about the…
1.3.6.1.4.1.25506.2.14.1.1.3Columnhh3cPsePortPeakPowerread-writecurrentThe object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consu…
1.3.6.1.4.1.25506.2.14.1.1.4Columnhh3cPsePortAveragePowerread-writecurrentThe object specifies the average power which has been consumed by the port. This object is a read/write integer value with units of milliWatts. Writing a value…
1.3.6.1.4.1.25506.2.14.1.1.5Columnhh3cPsePortCurrentPowerread-onlycurrentThe object specifies the power currently being consumed by the port. It is a read only integer value with units of milliWatts.
1.3.6.1.4.1.25506.2.14.1.1.6Columnhh3cPsePortPowerLimitread-writecurrentThe object specifies the power limit set for this port. The PSE will not supply more than this level of power to the specified port. It is a read/write integer…
1.3.6.1.4.1.25506.2.14.1.1.7Columnhh3cPsePortProfileIndexread-writecurrentIndicates the power profile which is currently associated with this port. This object references the corresponding hh3cPseProfileIndex object in the power prof…
1.3.6.1.4.1.25506.2.14.2Tablehh3cMainPseTablenot-accessiblecurrentDescription.
1.3.6.1.4.1.25506.2.14.2.1Rowhh3cMainPseEntrynot-accessiblecurrentThe pethMainPseGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. G…
1.3.6.1.4.1.25506.2.14.2.1.1Columnhh3cMainPsePowerLimitread-writecurrentThe object specifies the power limit set for the unit as a whole. The PoE unit will already have a nominal power defined by the IETF Power MIB [1] pethMainPseP…
1.3.6.1.4.1.25506.2.14.2.1.2Columnhh3cMainPseAveragePowerread-writecurrentThe object specifies the average power which has been consumed by the port. It is a read/write integer value with units of Watts (note - Watts is chosen instea…
1.3.6.1.4.1.25506.2.14.2.1.3Columnhh3cMainPsePeakPowerread-writecurrentThe object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed …
1.3.6.1.4.1.25506.2.14.2.1.4Columnhh3cMainGuaranteedPowerRemainingread-onlycurrentThe object specifies the amount of power remaining in the guaranteed power pool. Each time a port is placed into guaranteed mode it reserves a set amount of po…
1.3.6.1.4.1.25506.2.14.2.1.5Columnhh3cMainPsePriorityModeread-writecurrentDescribes or controls the priority mode on slot which must be enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnecti…
1.3.6.1.4.1.25506.2.14.2.1.6Columnhh3cMainPseLegacyread-writecurrentDescribes or controls the legacy mode on slot which must be enabled firstly. Legacy mode: standard or nonstandard PD detection mode.
1.3.6.1.4.1.25506.2.14.2.1.7Columnhh3cMainPsePowerPriorityread-writecurrentDescribes or controls the priority of the PSE. The priority will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to …
1.3.6.1.4.1.25506.2.14.3Scalarhh3cPseAutoDetectActiveread-writecurrentThe object specifies whether the device auto-detection feature is active. If this object is set to Active, and a known powered device is detected, then the por…
1.3.6.1.4.1.25506.2.14.4Nodehh3cPseComformance
1.3.6.1.4.1.25506.2.14.4.1Nodehh3cPseCompliances
1.3.6.1.4.1.25506.2.14.4.1.1Compliancehh3cPseCompliancecurrentDescription.
1.3.6.1.4.1.25506.2.14.4.2Nodehh3cPseGroup
1.3.6.1.4.1.25506.2.14.4.2.1Grouphh3cPsePortGroupcurrentA collection of objects should be supported at the same time.
1.3.6.1.4.1.25506.2.14.4.2.2Grouphh3cMainPseGroupcurrentA collection of objects should be supported at the same time.
1.3.6.1.4.1.25506.2.14.4.2.3Grouphh3cPseScalarGroupcurrentA collection of scalar objects supported.
1.3.6.1.4.1.25506.2.14.4.2.4Grouphh3cPsePDNotificationGroupcurrentPD Change Notification.
1.3.6.1.4.1.25506.2.14.4.2.5Grouphh3cPseProfilesGroupcurrentA collection of objects should be supported at the same time.
1.3.6.1.4.1.25506.2.14.4.2.6Grouphh3cPOEPowerThresholdLimitGroupcurrentPower threshold limits group.
1.3.6.1.4.1.25506.2.14.4.2.7Grouphh3cPOEPowerSupInfoGroupcurrentThe basic Power information group.
1.3.6.1.4.1.25506.2.14.4.2.8Grouphh3cPOEPowerDCOutStateGroupcurrentThe DC out power state group.
1.3.6.1.4.1.25506.2.14.4.2.9Grouphh3cPOEPowerDCOutInfoGroupcurrentThe power AC input switch information group
1.3.6.1.4.1.25506.2.14.4.2.10Grouphh3cPOEPowerACSwitchStateModuleGroupcurrentPD Change Notification.
1.3.6.1.4.1.25506.2.14.4.2.11Grouphh3cPOEPowerInCurStateGroupcurrentPD Change Notification.
1.3.6.1.4.1.25506.2.14.4.2.12Grouphh3cPOEPowerAlarmStateGroupcurrentPD Change Notification.
1.3.6.1.4.1.25506.2.14.5Scalarhh3cPsePowerMaxValueread-writecurrentThe object specifies the max poe power for lanswitch. The value should between the power currently and the max power.
1.3.6.1.4.1.25506.2.14.6Nodehh3cpseportNotification
1.3.6.1.4.1.25506.2.14.6.1Notificationhh3cpsePDChangeNotificationcurrentThis notification indicates if PD has been inserted or pulled out.
1.3.6.1.4.1.25506.2.14.6.2Notificationhh3cPOEDisconnectNotificationcurrentThis notification indicates the POE power module does not disconnect.
1.3.6.1.4.1.25506.2.14.6.3Notificationhh3cPOEInputErrorNotificationcurrentThis notification indicates the POE power module input error.
1.3.6.1.4.1.25506.2.14.6.4Notificationhh3cPOEOutputErrorNotificationcurrentThis notification indicates the POE power module output error.
1.3.6.1.4.1.25506.2.14.6.5Notificationhh3cPOEOverVoltageNotificationcurrentThis notification indicates the POE power module overruns the voltage limit.
1.3.6.1.4.1.25506.2.14.6.6Notificationhh3cPOEOverTempNotificationcurrentThis notification indicates the POE power module overruns the temperature limit.
1.3.6.1.4.1.25506.2.14.6.7Notificationhh3cPOEFanErrorNotificationcurrentThis notification indicates the POE power module fan error.
1.3.6.1.4.1.25506.2.14.6.8Notificationhh3cPOEModuleShutdownNotificationcurrentThis notification indicates the POE power module is closed.
1.3.6.1.4.1.25506.2.14.6.9Notificationhh3cPOECurRestrictedNotificationcurrentThis notification indicates the POE power module current is restricted.
1.3.6.1.4.1.25506.2.14.6.10Notificationhh3cPOEACSwitchNotificationcurrentThis notification indicates the AC input switch alarm of this POE power.
1.3.6.1.4.1.25506.2.14.6.11Notificationhh3cPOEACInCurANotificationcurrentThis notification indicates the AC input current A alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.12Notificationhh3cPOEACInCurBNotificationcurrentThis notification indicates the AC input current B alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.13Notificationhh3cPOEACInCurCNotificationcurrentThis notification indicates the AC input current C alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.14Notificationhh3cPOEACSwitchVolABNotificationcurrentThis notification indicates the AC input voltage AB alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.15Notificationhh3cPOEACSwitchVolBCNotificationcurrentThis notification indicates the AC input voltage BC alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.16Notificationhh3cPOEACSwitchVolCANotificationcurrentThis notification indicates the AC input voltage CA alarm state of this POE power.
1.3.6.1.4.1.25506.2.14.6.17Notificationhh3cPOEDCOutVolNotificationcurrentThis notification indicates the DC output alarm of this POE power.
1.3.6.1.4.1.25506.2.14.6.18Notificationhh3cPOEShutdownNotificationcurrentThis notification indicates the whole POE power has been shutdown.
1.3.6.1.4.1.25506.2.14.7Tablehh3cPseProfilesTablenot-accessiblecurrentA table of objects representing a set of power profiles. Power profiles can be applied to PoE ports, which have the effect of automatically setting the priorit…
1.3.6.1.4.1.25506.2.14.7.1Rowhh3cPseProfilesEntrynot-accessiblecurrentA set of objects that display and control the Main power of a PSE.
1.3.6.1.4.1.25506.2.14.7.1.1Columnhh3cPseProfileIndexnot-accessiblecurrentThe index of the profile. This uniquely allow the profile to be identified.
1.3.6.1.4.1.25506.2.14.7.1.2Columnhh3cPseProfileNameread-createcurrentAssigns the profile a name with which the settings can be assiciated with. For example, 'NBX Phone'.
1.3.6.1.4.1.25506.2.14.7.1.3Columnhh3cPseProfilePowerModeread-createcurrentThe power mode associated with this power profile. There are two possible power modes as follows: powerDisabled, powerEnabled. When a power profile is applied …
1.3.6.1.4.1.25506.2.14.7.1.4Columnhh3cPseProfilePowerLimitread-createcurrentThe power limit to be applied to the ports hh3cPsePortPowerLimit object when the profile is applied to the PSE port. Expressed in milliWatts.
1.3.6.1.4.1.25506.2.14.7.1.5Columnhh3cPseProfilePriorityread-createcurrentThis object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used b…
1.3.6.1.4.1.25506.2.14.7.1.6Columnhh3cPseProfilePairsread-createcurrentDescribes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the sign…
1.3.6.1.4.1.25506.2.14.7.1.7Columnhh3cPseProfileApplyNumread-onlycurrentThe number of this profile which has been applied. If hh3cPseProfileApplyNum is not zero, user can't change the current line.
1.3.6.1.4.1.25506.2.14.7.1.8Columnhh3cPseProfileRowStatusread-createcurrentThe status of this classifier. If hh3cPseProfileApplyNum is not zero, user can't delete the current line.
1.3.6.1.4.1.25506.2.14.8Nodehh3cPOEPowerObjects
1.3.6.1.4.1.25506.2.14.8.1Nodehh3cPOEThresholdLimitObjs
1.3.6.1.4.1.25506.2.14.8.1.1Scalarhh3cPOEThresholdACMimimumread-writecurrentInput threshold AC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit …
1.3.6.1.4.1.25506.2.14.8.1.2Scalarhh3cPOEThresholdACMaximumread-writecurrentInput threshold AC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit …
1.3.6.1.4.1.25506.2.14.8.1.3Scalarhh3cPOEThresholdDCMinimumread-writecurrentInput threshold DC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit …
1.3.6.1.4.1.25506.2.14.8.1.4Scalarhh3cPOEThresholdDCMaximumread-writecurrentInput threshold DC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit …
1.3.6.1.4.1.25506.2.14.8.2Nodehh3cPOESupModuleInfoObjs
1.3.6.1.4.1.25506.2.14.8.2.1Scalarhh3cPOEPowerTyperead-onlycurrentThe type of the power.
1.3.6.1.4.1.25506.2.14.8.2.2Scalarhh3cPOEPowerModuleNumread-onlycurrentThe number of the power modules.
1.3.6.1.4.1.25506.2.14.8.2.3Scalarhh3cPOESupervisionModuleNameread-onlycurrentThe object specifies the Supervision Module name on this POE power.
1.3.6.1.4.1.25506.2.14.8.2.4Scalarhh3cPOESMMajorVersionread-onlycurrentThe object specifies the high byte of the monitor module version.
1.3.6.1.4.1.25506.2.14.8.2.5Scalarhh3cPOESMMinorVersionread-onlycurrentThe object specifies the low byte of the monitor module version.
1.3.6.1.4.1.25506.2.14.8.2.6Scalarhh3cPOESMFactorNameread-onlycurrentThe object specifies the name of the manufactor.
1.3.6.1.4.1.25506.2.14.8.2.7Tablehh3cPOEModuleInfoTablenot-accessiblecurrentThe table of the module information on this POE power.
1.3.6.1.4.1.25506.2.14.8.2.7.1Rowhh3cPOEModuleInfoEntrynot-accessiblecurrentThe entry of the module information on this POE power.
1.3.6.1.4.1.25506.2.14.8.2.7.1.1Columnhh3cPOEModuleIndexaccessible-for-notifycurrentThe index of the current module on this POE power. It is also the index of hh3cPOEModuleInfoTable. The range of this node is from 1 to hh3cPOEPowerModuleNum.
1.3.6.1.4.1.25506.2.14.8.2.7.1.2Columnhh3cPOEModuleIDread-onlycurrentThe ID of the current module on this POE power.
1.3.6.1.4.1.25506.2.14.8.2.7.1.3Columnhh3cPOEModuleInfoPowerread-onlycurrentThe power of the current module on this POE power.
1.3.6.1.4.1.25506.2.14.8.2.7.1.4Columnhh3cPOEModuleHardVerInforead-onlycurrentThe hardware version information of the current module on this POE power.
1.3.6.1.4.1.25506.2.14.8.3Nodehh3cPOEDCOutStateObjects
1.3.6.1.4.1.25506.2.14.8.3.1Scalarhh3cPOEDCOutStateModuleNumread-onlycurrentThe module number on this POE power. It is the maximum of the hh3cPOEDCOutStateIndex.
1.3.6.1.4.1.25506.2.14.8.3.2Tablehh3cPOEDCOutStateTablenot-accessiblecurrentThe table of DC output power state on this POE power.
1.3.6.1.4.1.25506.2.14.8.3.2.1Rowhh3cPOEDCOutStateEntrynot-accessiblecurrentThe entry of the DC output power state on this POE power.
1.3.6.1.4.1.25506.2.14.8.3.2.1.1Columnhh3cPOEDCOutStateIndexaccessible-for-notifycurrentThe index of the DC output power state on this POE power. The range of this node is from 1 to hh3cPOEDCOutStateModuleNum.
1.3.6.1.4.1.25506.2.14.8.3.2.1.2Columnhh3cPOEDCOutDCVolAlarmread-onlycurrentThe DC output alarm of the DC output power state on this POE power. The value of this node will be the following values: normal (1), underLimit (2), aboveLimit…
1.3.6.1.4.1.25506.2.14.8.4Nodehh3cPOEDCOutInfoObjects
1.3.6.1.4.1.25506.2.14.8.4.1Scalarhh3cPOEDCOutCurNumread-onlycurrentThe number of DC output current on this POE power. It is the maximum of hh3cPOEDCOutInfoIndex.
1.3.6.1.4.1.25506.2.14.8.4.2Tablehh3cPOEDCOutInfoTablenot-accessiblecurrentThe table of the DC output information on this POE power.
1.3.6.1.4.1.25506.2.14.8.4.2.1Rowhh3cPOEDCOutInfoEntrynot-accessiblecurrentThe entry of the DC output information on this POE power.
1.3.6.1.4.1.25506.2.14.8.4.2.1.1Columnhh3cPOEDCOutInfoIndexaccessible-for-notifycurrentThe index of the DC output information on this POE POWER. The range of this node is from 1 to hh3cPOEDCOutCurNum.
1.3.6.1.4.1.25506.2.14.8.4.2.1.2Columnhh3cPOEDCOutVolread-onlycurrentThe DC output voltage of the current DC output on this POE power.
1.3.6.1.4.1.25506.2.14.8.4.2.1.3Columnhh3cPOEDCOutInfoLoadCurread-onlycurrentThe total load current of the current DC output on this POE power.
1.3.6.1.4.1.25506.2.14.8.5Nodehh3cPOEACSwitchStateModuleObjs
1.3.6.1.4.1.25506.2.14.8.5.1Scalarhh3cPOEACSwitchStateModuleNumread-onlycurrentThe number of the AC swtich state module on this POE power. It is the maximum of hh3cPOEACSwitchStateIndex.
1.3.6.1.4.1.25506.2.14.8.5.2Tablehh3cPOEACSwitchStateTablenot-accessiblecurrentThe table of the AC switch state on this POE power.
1.3.6.1.4.1.25506.2.14.8.5.2.1Rowhh3cPOEACSwitchStateEntrynot-accessiblecurrentThe entry of the AC switch state on this POE power.
1.3.6.1.4.1.25506.2.14.8.5.2.1.1Columnhh3cPOEACSwitchStateIndexaccessible-for-notifycurrentThe index of the AC switch state on this POE power. The range of this node is from 1 to hh3cPOEACSwitchStateModuleNum.
1.3.6.1.4.1.25506.2.14.8.5.2.1.2Columnhh3cPOEACSwitchStateread-onlycurrentThe AC switch state on this POE power. The value of this node will be one of the following values: on (1), off (2), highVoltInput (3), lowVoltInput (4)
1.3.6.1.4.1.25506.2.14.8.6Nodehh3cPOEInCurStateObjects
1.3.6.1.4.1.25506.2.14.8.6.1Scalarhh3cPOEInCurStateModuleNumread-onlycurrentThe DC input current state of the module on this POE power. It is the maximum of the hh3cPOESwitchStateVolExIndex.
1.3.6.1.4.1.25506.2.14.8.6.2Scalarhh3cPOEInCurAStateread-onlycurrentThe current A state in the DC input on this POE power. normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7…
1.3.6.1.4.1.25506.2.14.8.6.3Scalarhh3cPOEInCurBStateread-onlycurrentThe current B state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), …
1.3.6.1.4.1.25506.2.14.8.6.4Scalarhh3cPOEInCurCStateread-onlycurrentThe current C state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), …
1.3.6.1.4.1.25506.2.14.8.6.5Tablehh3cPOESwitchStateVolExTablenot-accessiblecurrentAll alarm status of the VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fus…
1.3.6.1.4.1.25506.2.14.8.6.5.1Rowhh3cPOESwitchStateVolExEntrynot-accessiblecurrentThe hh3cPOESwitchStateVolExIndex will match the number of the VOL status.
1.3.6.1.4.1.25506.2.14.8.6.5.1.1Columnhh3cPOESwitchStateVolExIndexaccessible-for-notifycurrentThe object species the index of the VOL status. The range of this node is from 1 to hh3cPOEInCurStateModuleNum.
1.3.6.1.4.1.25506.2.14.8.6.5.1.2Columnhh3cPOESwitchStateInVolABread-onlycurrentThe object specifies the VOL AB alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3…
1.3.6.1.4.1.25506.2.14.8.6.5.1.3Columnhh3cPOESwitchStateInVolBCread-onlycurrentThe object specifies the VOL BC alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3…
1.3.6.1.4.1.25506.2.14.8.6.5.1.4Columnhh3cPOESwitchStateInVolCAread-onlycurrentThe object specifies the VOL CA alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3…
1.3.6.1.4.1.25506.2.14.8.7Nodehh3cPOEAlarmStateObjects
1.3.6.1.4.1.25506.2.14.8.7.1Scalarhh3cPOEAlarmStateModuleNumread-onlycurrentThe object specifies the number of the power modules in alarm state.
1.3.6.1.4.1.25506.2.14.8.7.2Tablehh3cPOEAlarmStateInfoTablenot-accessiblecurrentAll alarm states in the POE power modules.
1.3.6.1.4.1.25506.2.14.8.7.2.1Rowhh3cPOEAlarmStateInfoEntrynot-accessiblecurrentThe hh3cPOEAlarmModuleInfoIndex will match the number of the power module.
1.3.6.1.4.1.25506.2.14.8.7.2.1.1Columnhh3cPOEAlarmModuleInfoIndexaccessible-for-notifycurrentThe index specifies the index of the Hh3cPOEAlarmStateInfoEntry table. The range of this node is from 1 to hh3cPOEAlarmStateModuleNum.
1.3.6.1.4.1.25506.2.14.8.7.2.1.2Columnhh3cPOEModuleDisconnectread-onlycurrentThe node specifies the alarm state: The module does not link. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.3Columnhh3cPOEModuleInputErrorread-onlycurrentThe node specifies the alarm state: Input error. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.4Columnhh3cPOEModuleOutputErrorread-onlycurrentThe node specifies the alarm state: Output error. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.5Columnhh3cPOEModuleOverVoltageread-onlycurrentThe node specifies the alarm state: The voltage is too high. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.6Columnhh3cPOEModuleOverTempread-onlycurrentThe node specifies the alarm state: The temperature is too high. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.7Columnhh3cPOEModuleFanErrorread-onlycurrentThe node specifies the alarm state: The fan error. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.8Columnhh3cPOEModuleShutdownread-onlycurrentThe node specifies the alarm state: The module is shutdown. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.8.7.2.1.9Columnhh3cPOEModuleCurRestrictedread-onlycurrentThe node specifies the alarm state: The module limit the current. The value of this node is one of the following values: normal (1), alarm (2).
1.3.6.1.4.1.25506.2.14.9Scalarhh3cPsePolicyModeread-writecurrentThe PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power wi…
1.3.6.1.4.1.25506.2.14.10Scalarhh3cPDPolicyModeread-writecurrentThe PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will …
Type Definitions
NameSyntaxStatusDescription
ACAlarmStateINTEGER { normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7) }
DCAlarmStateINTEGER { normal (1), underLimit (2), aboveLimit (3), fuseBroken (4), switchOff (5), otherError (6) }
ModuleAlarmStateINTEGER { normal (1), alarm (2) }
SwitchStateINTEGER { on (1), off (2), highVoltInput (3), lowVoltInput (4) }
MIB Viewer