MIB Viewer

HH3C-SMLK-MIB

34 objects
This MIB defines objects for managing Smart Link. Smart Link is a feature developed to address the slow convergence issue with STP. It provides link redundancy and fast convergence in a dual uplink network, allowing the backup link to take over quickly when the primary link fails.
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.25506.2.147Identityhh3cSmlkThis MIB defines objects for managing Smart Link. Smart Link is a feature developed to address the slow convergence issue with STP. It provides link redundancy…
1.3.6.1.4.1.25506.2.147.1Nodehh3cSmlkObject
1.3.6.1.4.1.25506.2.147.1.1Tablehh3cSmlkGroupTablenot-accessiblecurrentA list of entries of a smart link group.
1.3.6.1.4.1.25506.2.147.1.1.1Rowhh3cSmlkGroupEntrynot-accessiblecurrentA list of parameters that describe a smart link group.
1.3.6.1.4.1.25506.2.147.1.1.1.1Columnhh3cSmlkGroupIDaccessible-for-notifycurrentAn index that uniquely identifies an entry in the smart link group table.
1.3.6.1.4.1.25506.2.147.1.1.1.2Columnhh3cSmlkDeviceIDread-onlycurrentDevice ID of a smart link group. The device ID is the bridge MAC of the device.
1.3.6.1.4.1.25506.2.147.1.1.1.3Columnhh3cSmlkPreemptionModeread-createcurrentPreemption mode of a smart link group.
1.3.6.1.4.1.25506.2.147.1.1.1.4Columnhh3cSmlkSpeedThresholdread-createcurrentSpeed threshold for a smart link group in speed mode. This object is valid only when the value of hh3cSmlkPreemptionMode is 'speed'.
1.3.6.1.4.1.25506.2.147.1.1.1.5Columnhh3cSmlkPreemptionDelayread-createcurrentPreemption delay for a smart link group, in the range of 0 to 300 seconds.
1.3.6.1.4.1.25506.2.147.1.1.1.6Columnhh3cSmlkControlVlanIDread-createcurrentIndex of the control VLAN specified for a smart link group. The value 65535 indicates that the control VLAN has not been configured.
1.3.6.1.4.1.25506.2.147.1.1.1.7Columnhh3cSmlkInstanceListLowread-createcurrentEach octet contained in this value specifies an eight-instance group, with the first octet specifying instances 0 through 7, the second octet specifying instan…
1.3.6.1.4.1.25506.2.147.1.1.1.8Columnhh3cSmlkInstanceListHighread-createcurrentEach octet contained in this value specifies an eight-instance group, with the first octet specifying instances 2048 through 2055, the second octet specifying …
1.3.6.1.4.1.25506.2.147.1.1.1.9Columnhh3cSmlkGroupRowStatusread-createcurrentThis object is responsible for managing creation, deletion, and modification of rows. The rows support active status, CreatAndGo, and destroy operations.
1.3.6.1.4.1.25506.2.147.1.2Tablehh3cSmlkPortTablenot-accessiblecurrentA list of port entries of a smart link group.
1.3.6.1.4.1.25506.2.147.1.2.1Rowhh3cSmlkPortEntrynot-accessiblecurrentA list of parameters that describe a port to be added to a smart link group.
1.3.6.1.4.1.25506.2.147.1.2.1.1Columnhh3cSmlkPortIfIndexaccessible-for-notifycurrentIfIndex of a port in a smart link group.
1.3.6.1.4.1.25506.2.147.1.2.1.2Columnhh3cSmlkPortRoleread-createcurrentRole of a port in a smart link group.
1.3.6.1.4.1.25506.2.147.1.2.1.3Columnhh3cSmlkPortStatusread-onlycurrentStatus of a port in a smart link group.
1.3.6.1.4.1.25506.2.147.1.2.1.4Columnhh3cSmlkFlushCountread-onlycurrentNumber of transmitted flush messages.
1.3.6.1.4.1.25506.2.147.1.2.1.5Columnhh3cSmlkLastFlushTimeread-onlycurrentTime when the last flush message was transmitted.
1.3.6.1.4.1.25506.2.147.1.2.1.6Columnhh3cSmlkPortRowStatusread-createcurrentThis object is responsible for managing creation, deletion, and modification of rows. The rows support active status, CreatAndGo, and destroy operations.
1.3.6.1.4.1.25506.2.147.1.3Tablehh3cSmlkFlushEnableTablenot-accessiblecurrentA list of ports on which flush message receiving is enabled.
1.3.6.1.4.1.25506.2.147.1.3.1Rowhh3cSmlkFlushEnableEntrynot-accessiblecurrentA list of parameters that describe a port on which flush message receiving is enabled.
1.3.6.1.4.1.25506.2.147.1.3.1.1Columnhh3cSmlkIfIndexnot-accessiblecurrentIfIndex of a port on which flush message receiving is enabled.
1.3.6.1.4.1.25506.2.147.1.3.1.2Columnhh3cSmlkControlVlanListLowread-writecurrentSpecifies the control VLANs used for receiving flush messages. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes.…
1.3.6.1.4.1.25506.2.147.1.3.1.3Columnhh3cSmlkControlVlanListHighread-writecurrentSpecifies the control VLANs used for receiving flush messages. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in byt…
1.3.6.1.4.1.25506.2.147.2Nodehh3cSmlkTrap
1.3.6.1.4.1.25506.2.147.2.0Nodehh3cSmlkTrapPrefix
1.3.6.1.4.1.25506.2.147.2.0.1Notificationhh3cSmlkGroupLinkActivecurrentA trap message is generated when the status of a port in a smart link group changes to active.
1.3.6.1.4.1.25506.2.147.2.0.2Notificationhh3cSmlkGroupStatusSwitchcurrentA trap message is generated upon status change of a smart link group.
1.3.6.1.4.1.25506.2.147.2.0.3Notificationhh3cSmlkInactiveLinkDowncurrentA trap message is generated when the status of an inactive port in a smart link group changes to down.
1.3.6.1.4.1.25506.2.147.2.0.4Notificationhh3cSmlkInactiveLinkUpcurrentA trap message is generated when the status of an inactive port in a smart link group changes to up.
1.3.6.1.4.1.25506.2.147.2.1Nodehh3cSmlkTrapOjbects
1.3.6.1.4.1.25506.2.147.2.1.1Scalarhh3cSmlkGroupStatusaccessible-for-notifycurrentThe smart link group status. unknown: The group status is unknown. allDown: All ports in the group are down. oneUp: The group has one port in up state. twoUp: …