HH3C-SYS-MAN-MIB
164 objects
This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add the support for XRN.
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| SNMP-TARGET-MIB | SnmpTagList SnmpTagValue |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.2.3 | Identityhh3cSystemMan | This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add t… | ||
| 1.3.6.1.4.1.25506.2.3.1 | Nodehh3cSystemManMIBObjects | |||
| 1.3.6.1.4.1.25506.2.3.1.1 | Nodehh3cSysClock | |||
| 1.3.6.1.4.1.25506.2.3.1.1.1 | Scalarhh3cSysLocalClock | read-write | current | This node gives the current local time of the system. The unit of it is DateAndTime. |
| 1.3.6.1.4.1.25506.2.3.1.1.2 | Nodehh3cSysSummerTime | |||
| 1.3.6.1.4.1.25506.2.3.1.1.2.1 | Scalarhh3cSysSummerTimeEnable | read-only | current | This node indicates the status of summer time. If the value of this node is enable, means that summer time is enabled. If the value is disable, means that summ… |
| 1.3.6.1.4.1.25506.2.3.1.1.2.2 | Scalarhh3cSysSummerTimeZone | read-write | current | This node describes the name of time zone in summer. The string is only used to display in local time when summer time is running. That the value of hh3cSysLoc… |
| 1.3.6.1.4.1.25506.2.3.1.1.2.3 | Scalarhh3cSysSummerTimeMethod | read-write | current | This node provides the execute method of summer time. oneOff(1): means that summer time only takes effect at specified time. repeating(2): means that summer ti… |
| 1.3.6.1.4.1.25506.2.3.1.1.2.4 | Scalarhh3cSysSummerTimeStart | read-write | current | This node provides the start time of summer time. |
| 1.3.6.1.4.1.25506.2.3.1.1.2.5 | Scalarhh3cSysSummerTimeEnd | read-write | current | This node provides the end time of summer time. The end time must be more than start time one day and less than start time one year. |
| 1.3.6.1.4.1.25506.2.3.1.1.2.6 | Scalarhh3cSysSummerTimeOffset | read-write | current | This node provides the offset time of summer time. The offset time(in seconds) means that how much time need to be appended to the local time. |
| 1.3.6.1.4.1.25506.2.3.1.1.3 | Scalarhh3cSysLocalClockString | read-write | current | This node gives the current local time of the system. For example, Tuesday May 26, 2002 at 1:30:15 would be displayed as: 2002-5-26T13:30:15.0Z |
| 1.3.6.1.4.1.25506.2.3.1.1.4 | Nodehh3cSysClockProtocolGroup | |||
| 1.3.6.1.4.1.25506.2.3.1.1.4.1 | Scalarhh3cSysClockProtocol | read-write | current | Writing none(1) to this object indicates to use the local system time. When the value is set to none(1), hh3cSysClockProtocolSrcMdc and hh3cSysClockProtocolSrc… |
| 1.3.6.1.4.1.25506.2.3.1.1.4.2 | Scalarhh3cSysClockProtocolSrcMdc | read-write | current | The MDC ID that is used for the system time source. This node is valid when the clock protocol is NTP or PTP. If MDC is not supported on this system, this node… |
| 1.3.6.1.4.1.25506.2.3.1.1.4.3 | Scalarhh3cSysClockProtocolSrcContext | read-write | current | The context ID that is used for the system time source. This node is valid when the clock protocol is NTP or PTP. If context is not supported on this system, t… |
| 1.3.6.1.4.1.25506.2.3.1.1.5 | Scalarhh3cSysLocalClockString2 | read-write | current | This node gives the current local time of the system. For example, 1:30:15 on Tuesday, May 26th, 2002 will be displayed as: 2002/05/26/01/30/15. 2002/5/26/1/30… |
| 1.3.6.1.4.1.25506.2.3.1.2 | Nodehh3cSysCurrent | |||
| 1.3.6.1.4.1.25506.2.3.1.2.1 | Tablehh3cSysCurTable | not-accessible | current | The current status of system. A configuration file, an image file and bootrom information are used to describe the current status. |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1 | Rowhh3cSysCurEntry | not-accessible | current | An entry of hh3cSysCurTable. |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1.1 | Columnhh3cSysCurEntPhysicalIndex | not-accessible | current | The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is th… |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1.2 | Columnhh3cSysCurCFGFileIndex | read-only | current | The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corre… |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1.3 | Columnhh3cSysCurImageIndex | read-only | current | The image file currently used by the specified entity. It will be the value of corresponding hh3cSysImageIndex in hh3cSysImageTable. |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1.4 | Columnhh3cSysCurBtmFileName | read-only | current | The bootrom file currently used by the specified entity. |
| 1.3.6.1.4.1.25506.2.3.1.2.1.1.5 | Columnhh3cSysCurUpdateBtmFileName | read-only | current | The default value of this object is the same as the value of hh3cSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This boo… |
| 1.3.6.1.4.1.25506.2.3.1.3 | Nodehh3cSysReload | |||
| 1.3.6.1.4.1.25506.2.3.1.3.1 | Scalarhh3cSysReloadSchedule | read-write | current | The object points one row in hh3cSysReloadScheduleTable. Its value is equal to the value of hh3cSysReloadScheduleIndex. When a reload action is finished, the v… |
| 1.3.6.1.4.1.25506.2.3.1.3.2 | Scalarhh3cSysReloadAction | read-write | current | Writing reloadOnSchedule(2) to this object performs the reload operation on schedule. If hh3cSysReloadScheduleTime is not set, the value of hh3cSysReloadAction… |
| 1.3.6.1.4.1.25506.2.3.1.3.3 | Tablehh3cSysReloadScheduleTable | not-accessible | current | A reload parameters set table. The table is exclusively used for reloading. When reloading action finished, the value of the table may be empty or still exist.… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1 | Rowhh3cSysReloadScheduleEntry | not-accessible | current | Entry of hh3cSysReloadScheduleTable. |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.1 | Columnhh3cSysReloadScheduleIndex | not-accessible | current | The index of hh3cSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical i… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.2 | Columnhh3cSysReloadEntity | read-create | current | The value of hh3cSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value … |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.3 | Columnhh3cSysReloadCfgFile | read-create | current | The value indicates an entry in hh3cSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding hh3cSysCFGFileIndex in… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.4 | Columnhh3cSysReloadImage | read-create | current | The value indicates an entry in hh3cSysImageTable. It defines an image file for reload action. It is the value of corresponding hh3cSysImageIndex in hh3cSysIma… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.5 | Columnhh3cSysReloadReason | read-create | current | The reason of system's reloading. It is a zero length octet string when not set. |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.6 | Columnhh3cSysReloadScheduleTime | read-create | current | Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of t… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.7 | Columnhh3cSysReloadRowStatus | read-create | current | If one of the value of hh3cSysReloadEntity,hh3cSysReloadImage is invalid, the value of hh3cSysReloadRowStatus can not be set to the value of ACTIVE. A valid en… |
| 1.3.6.1.4.1.25506.2.3.1.3.3.1.8 | Columnhh3cSysReloadScheduleTagList | read-create | current | It specifies a tag list for the entry. |
| 1.3.6.1.4.1.25506.2.3.1.3.4 | Scalarhh3cSysReloadTag | read-write | current | This object contains a single tag value which is used to select entries in the hh3cSysReloadScheduleTable. In the hh3cSysReloadScheduleTable,any entry that con… |
| 1.3.6.1.4.1.25506.2.3.1.4 | Nodehh3cSysImage | |||
| 1.3.6.1.4.1.25506.2.3.1.4.1 | Scalarhh3cSysImageNum | read-only | current | The number of system images. It indicates the total entries of hh3cSysImageTable. |
| 1.3.6.1.4.1.25506.2.3.1.4.2 | Tablehh3cSysImageTable | not-accessible | current | The system image management table. When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed, then hh3cSysImageType of the new file will… |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1 | Rowhh3cSysImageEntry | not-accessible | current | An entity image entry. Each entry consists of information of an entity image. The hh3cSysImageIndex exclusively defines an image file. |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1.1 | Columnhh3cSysImageIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++… |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1.2 | Columnhh3cSysImageName | read-only | current | The file name of the image. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1.3 | Columnhh3cSysImageSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1.4 | Columnhh3cSysImageLocation | read-only | current | The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For sla… |
| 1.3.6.1.4.1.25506.2.3.1.4.2.1.5 | Columnhh3cSysImageType | read-write | current | It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image i… |
| 1.3.6.1.4.1.25506.2.3.1.5 | Nodehh3cSysCFGFile | |||
| 1.3.6.1.4.1.25506.2.3.1.5.1 | Scalarhh3cSysCFGFileNum | read-only | current | The number of the configuration files in the system. It indicates the total entries of hh3cSysCFGFileTable. |
| 1.3.6.1.4.1.25506.2.3.1.5.2 | Tablehh3cSysCFGFileTable | not-accessible | current | A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file… |
| 1.3.6.1.4.1.25506.2.3.1.5.2.1 | Rowhh3cSysCFGFileEntry | not-accessible | current | A configuration file entry. Each entry consists of information of a configuration file. hh3cSysCFGFileIndex exclusively decides a configuration file. |
| 1.3.6.1.4.1.25506.2.3.1.5.2.1.1 | Columnhh3cSysCFGFileIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++… |
| 1.3.6.1.4.1.25506.2.3.1.5.2.1.2 | Columnhh3cSysCFGFileName | read-only | current | Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partitio… |
| 1.3.6.1.4.1.25506.2.3.1.5.2.1.3 | Columnhh3cSysCFGFileSize | read-only | current | Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero. |
| 1.3.6.1.4.1.25506.2.3.1.5.2.1.4 | Columnhh3cSysCFGFileLocation | read-only | current | The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slav… |
| 1.3.6.1.4.1.25506.2.3.1.6 | Nodehh3cSysBtmFile | |||
| 1.3.6.1.4.1.25506.2.3.1.6.1 | Nodehh3cSysBtmFileLoad | |||
| 1.3.6.1.4.1.25506.2.3.1.6.1.1 | Scalarhh3cSysBtmLoadMaxNumber | read-only | current | This object shows the maximum number of hh3cSysBtmLoadEntry in each device/unit. |
| 1.3.6.1.4.1.25506.2.3.1.6.2 | Tablehh3cSysBtmLoadTable | not-accessible | current | This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the hh3cFlhFileTable. These files are us… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1 | Rowhh3cSysBtmLoadEntry | not-accessible | current | Entries in the hh3cSysBtmLoadTable are created and deleted using the hh3cSysBtmRowStatus object. When a new row is being created and the number of entries is h… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.1 | Columnhh3cSysBtmLoadIndex | not-accessible | current | The index of hh3cSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + … |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.2 | Columnhh3cSysBtmFileName | read-create | current | The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. I… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.3 | Columnhh3cSysBtmFileType | read-create | current | main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updat… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.4 | Columnhh3cSysBtmRowStatus | read-create | current | Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of hh3cSysBtmFi… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.5 | Columnhh3cSysBtmErrorStatus | read-only | current | This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. s… |
| 1.3.6.1.4.1.25506.2.3.1.6.2.1.6 | Columnhh3cSysBtmLoadTime | read-only | current | This object indicates operation time. |
| 1.3.6.1.4.1.25506.2.3.1.7 | Nodehh3cSysPackage | |||
| 1.3.6.1.4.1.25506.2.3.1.7.1 | Scalarhh3cSysPackageNum | read-only | current | The number of software packages. It indicates the total entries of hh3cSysPackageTable. |
| 1.3.6.1.4.1.25506.2.3.1.7.2 | Tablehh3cSysPackageTable | not-accessible | current | The system package management table. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1 | Rowhh3cSysPackageEntry | not-accessible | current | An software package entry. Each entry consists of information of an software package. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.1 | Columnhh3cSysPackageIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++… |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.2 | Columnhh3cSysPackageName | read-only | current | The file name of the package. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.3 | Columnhh3cSysPackageSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.4 | Columnhh3cSysPackageLocation | read-only | current | The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For s… |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.5 | Columnhh3cSysPackageType | read-only | current | It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuratio… |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.6 | Columnhh3cSysPackageAttribute | read-write | current | It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value … |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.7 | Columnhh3cSysPackageStatus | read-only | current | It indicates the status of the package file. If this file is used in the current system, its status is 'active'. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.8 | Columnhh3cSysPackageDescription | read-only | current | It is the description of the package. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.9 | Columnhh3cSysPackageFeature | read-only | current | Indicate the feature of the package. Different package files could be the same feature. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.10 | Columnhh3cSysPackageVersion | read-only | current | Indicate the version of the package. |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.11 | Columnhh3cSysPackageLoadAttribute | read-write | current | File attribute of the startup image for an extended device to load from the parent device. Examples of extended devices include PEXs and firewall modules. The … |
| 1.3.6.1.4.1.25506.2.3.1.7.2.1.12 | Columnhh3cSysPackageModel | read-only | current | Indicates whether the image file is for an extended device or the parent device. Examples of extended devices include PEXs and firewall modules. |
| 1.3.6.1.4.1.25506.2.3.1.7.3 | Scalarhh3cSysPackageOperateEntryLimit | read-write | current | The maximum number of the entries in hh3cSysPackageOperateTable. |
| 1.3.6.1.4.1.25506.2.3.1.7.4 | Tablehh3cSysPackageOperateTable | not-accessible | current | A table of package file operate. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1 | Rowhh3cSysPackageOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1.1 | Columnhh3cSysPackageOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1.2 | Columnhh3cSysPackageOperatePackIndex | read-create | current | Specify the package file in the hh3cSysPackageTable. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1.3 | Columnhh3cSysPackageOperateStatus | read-create | current | activate or deactivate a package in the hh3cSysPackageTable. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1.4 | Columnhh3cSysPackageOperateRowStatus | read-create | current | the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. |
| 1.3.6.1.4.1.25506.2.3.1.7.4.1.5 | Columnhh3cSysPackageOperateResult | read-only | current | the result of the operation. |
| 1.3.6.1.4.1.25506.2.3.1.8 | Nodehh3cSysIpeFile | |||
| 1.3.6.1.4.1.25506.2.3.1.8.1 | Scalarhh3cSysIpeFileNum | read-only | current | The number of software IPE(Image Package Envelop) files. It indicates the total entries of hh3cSysIpeFileTable. |
| 1.3.6.1.4.1.25506.2.3.1.8.2 | Tablehh3cSysIpeFileTable | not-accessible | current | The system IPE file manage table. |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1 | Rowhh3cSysIpeFileEntry | not-accessible | current | An IPE package file entry. Each entry consists of information of an IPE package file. hh3cSysIpeFileIndex exclusively decides an IPE file. |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1.1 | Columnhh3cSysIpeFileIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++… |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1.2 | Columnhh3cSysIpeFileName | read-only | current | The file name of the IPE file. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1.3 | Columnhh3cSysIpeFileSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1.4 | Columnhh3cSysIpeFileLocation | read-only | current | The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For … |
| 1.3.6.1.4.1.25506.2.3.1.8.2.1.5 | Columnhh3cSysIpeFileModel | read-only | current | Device models for which the IPE file contains software images. For the ease of software upgrade, an IPE file might contain software images for a parent device … |
| 1.3.6.1.4.1.25506.2.3.1.8.3 | Tablehh3cSysIpePackageTable | not-accessible | current | The IPE package file table. It shows the package files in the IPE file. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1 | Rowhh3cSysIpePackageEntry | not-accessible | current | An entry of the hh3cIpePackageTable. Indexed by hh3cSysIpeFileIndex and hh3cSysIpePackageIndex. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.1 | Columnhh3cSysIpePackageIndex | not-accessible | current | It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value… |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.2 | Columnhh3cSysIpePackageName | read-only | current | The file name of the package file. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.3 | Columnhh3cSysIpePackageSize | read-only | current | Size of the package file in bytes. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.4 | Columnhh3cSysIpePackageType | read-only | current | It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuratio… |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.5 | Columnhh3cSysIpePackageDescription | read-only | current | It is the description of the package. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.6 | Columnhh3cSysIpePackageFeature | read-only | current | Indicate the feature of the package. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.7 | Columnhh3cSysIpePackageVersion | read-only | current | The version of the package. |
| 1.3.6.1.4.1.25506.2.3.1.8.3.1.8 | Columnhh3cSysIpePackageModel | read-only | current | Indicates whether the image package file is for an extended device, the parent device, or both. Examples of extended devices include PEXs and firewall modules. |
| 1.3.6.1.4.1.25506.2.3.1.8.4 | Tablehh3cSysIpeFileOperateTable | not-accessible | current | A table of IPE file operate. |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1 | Rowhh3cSysIpeFileOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1.1 | Columnhh3cSysIpeFileOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1.2 | Columnhh3cSysIpeFileOperateFileIndex | read-create | current | Specify the IPE file in the hh3cSysIpeFileTable. This IPE file will be unpacked to package files. |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1.3 | Columnhh3cSysIpeFileOperateAttribute | read-create | current | It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages… |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1.4 | Columnhh3cSysIpeFileOperateRowStatus | read-create | current | the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. |
| 1.3.6.1.4.1.25506.2.3.1.8.4.1.5 | Columnhh3cSysIpeFileOperateResult | read-only | current | the result of the operation. |
| 1.3.6.1.4.1.25506.2.3.1.9 | Nodehh3cSysSetBootImage | |||
| 1.3.6.1.4.1.25506.2.3.1.9.1 | Nodehh3cSysSetBootImageOp | |||
| 1.3.6.1.4.1.25506.2.3.1.9.1.1 | Scalarhh3cSysSetBootImageAction | read-write | current | Sets images as primary startup images, secondary startup images, or both. Primary startup images are also called 'main' startup images. For extended devices, s… |
| 1.3.6.1.4.1.25506.2.3.1.9.1.2 | Scalarhh3cSysSetBootImageFileOverWrite | read-write | current | Determines whether to overwrite the existing image file with the same name as the downloaded image file. |
| 1.3.6.1.4.1.25506.2.3.1.9.1.3 | Scalarhh3cSysSetBootImageRemoveIpeFile | read-write | current | Determines whether the IPE file will be removed when the startup images are set successfully. If this object is set to TRUE, the IPE file will be removed. |
| 1.3.6.1.4.1.25506.2.3.1.9.1.4 | Scalarhh3cSysSetBootImageStatus | read-only | current | Status of the startup image set operation. |
| 1.3.6.1.4.1.25506.2.3.1.9.1.5 | Scalarhh3cSysSetBootImageFailedReason | read-only | current | Startup image operation failure reason. The field is empty if the operation was successful. |
| 1.3.6.1.4.1.25506.2.3.1.9.2 | Tablehh3cSysBootPackageTable | not-accessible | current | Table of images to be set as startup images. It should be used when hh3cSysBootIpeTable is empty. |
| 1.3.6.1.4.1.25506.2.3.1.9.2.1 | Rowhh3cSysBootPackageEntry | not-accessible | current | Entry of the image table. |
| 1.3.6.1.4.1.25506.2.3.1.9.2.1.1 | Columnhh3cSysBootPackageIndex | not-accessible | current | Index of the software images. The index must be included in hh3cSysPackageTable. |
| 1.3.6.1.4.1.25506.2.3.1.9.2.1.2 | Columnhh3cSysBootPackageRowStatus | read-create | current | Row status of the image entry. |
| 1.3.6.1.4.1.25506.2.3.1.9.3 | Tablehh3cSysBootIpeTable | not-accessible | current | Table of the IPE files to be set for startup. It should be used when hh3cSysBootPackageTable is empty. |
| 1.3.6.1.4.1.25506.2.3.1.9.3.1 | Rowhh3cSysBootIpeEntry | not-accessible | current | Entry in the IPE file table. |
| 1.3.6.1.4.1.25506.2.3.1.9.3.1.1 | Columnhh3cSysBootIpeIndex | not-accessible | current | IPE file index. The index must be included in hh3cSysIpeFileTable. |
| 1.3.6.1.4.1.25506.2.3.1.9.3.1.2 | Columnhh3cSysBootIpeRowStatus | read-create | current | Row status of the IPE file table entry. |
| 1.3.6.1.4.1.25506.2.3.1.9.4 | Tablehh3cSysSetBootImageResultTable | not-accessible | current | Table of startup image operation results. This table shows the result for each card. |
| 1.3.6.1.4.1.25506.2.3.1.9.4.1 | Rowhh3cSysSetBootImageResultEntry | not-accessible | current | Entry in the startup image operation result table. |
| 1.3.6.1.4.1.25506.2.3.1.9.4.1.1 | Columnhh3cSysSetBootImageResultIndex | not-accessible | current | Index of a startup image operation result. It is identical to the entity index of each card. |
| 1.3.6.1.4.1.25506.2.3.1.9.4.1.2 | Columnhh3cSysSetBootImageResultStatusOfEachCard | read-only | current | Status of the startup image set operation. |
| 1.3.6.1.4.1.25506.2.3.1.9.4.1.3 | Columnhh3cSysSetBootImageFailedReasonOfEachCard | read-only | current | Reason of the startup image set failure for a card. It is empty if the operation was successful. |
| 1.3.6.1.4.1.25506.2.3.2 | Nodehh3cSystemManMIBNotifications | |||
| 1.3.6.1.4.1.25506.2.3.2.1 | Notificationhh3cSysClockChangedNotification | current | A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of hh3cSysLocalClock reflect… | |
| 1.3.6.1.4.1.25506.2.3.2.2 | Notificationhh3cSysReloadNotification | current | A hh3cSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has … | |
| 1.3.6.1.4.1.25506.2.3.2.3 | Notificationhh3cSysStartUpNotification | current | a hh3cSysStartUpNotification trap will be sent when the system starts up with 'main' image file failed, a trap will be sent to indicate which type the current … | |
| 1.3.6.1.4.1.25506.2.3.3 | Nodehh3cSystemManMIBConformance | |||
| 1.3.6.1.4.1.25506.2.3.3.1 | Nodehh3cSystemManMIBCompliances | |||
| 1.3.6.1.4.1.25506.2.3.3.1.1 | Compliancehh3cSystemManMIBCompliance | current | The compliance statement for entities which implement the system management MIB. | |
| 1.3.6.1.4.1.25506.2.3.3.2 | Nodehh3cSystemManMIBGroups | |||
| 1.3.6.1.4.1.25506.2.3.3.2.1 | Grouphh3cSysClockGroup | current | A collection of objects providing mandatory system clock information. | |
| 1.3.6.1.4.1.25506.2.3.3.2.2 | Grouphh3cSysReloadGroup | current | A collection of objects providing mandatory system reload. | |
| 1.3.6.1.4.1.25506.2.3.3.2.3 | Grouphh3cSysImageGroup | current | A collection of objects providing mandatory system image information. | |
| 1.3.6.1.4.1.25506.2.3.3.2.4 | Grouphh3cSysCFGFileGroup | current | A collection of objects providing mandatory system configuration file information. | |
| 1.3.6.1.4.1.25506.2.3.3.2.5 | Grouphh3cSysCurGroup | current | A collection of system current status. | |
| 1.3.6.1.4.1.25506.2.3.3.2.6 | Grouphh3cSystemManNotificationGroup | current | A collection of notifications. | |
| 1.3.6.1.4.1.25506.2.3.3.2.7 | Grouphh3cSystemBtmLoadGroup | current | A collection of objects providing system update bootrom information. | |
| 1.3.6.1.4.1.25506.2.3.4 | Nodehh3cSystemManTrapV2 | |||
| 1.3.6.1.4.1.25506.2.3.4.0 | Nodehh3cSystemManTrapV2Prefix | |||
| 1.3.6.1.4.1.25506.2.3.4.0.1 | Notificationhh3cSysPatchInstallFail | current | This notification is generated when the installation of a patch package fails. | |
| 1.3.6.1.4.1.25506.2.3.4.0.2 | Notificationhh3cSysPackageVerifyFailed | current | This notification is generated when a software image package fails validation. | |
| 1.3.6.1.4.1.25506.2.3.5 | Nodehh3cSystemManTrapInfor | |||
| 1.3.6.1.4.1.25506.2.3.5.1 | Scalarhh3cSysPatchInstallFailPkgname | accessible-for-notify | current | Name of the patch package that fails installation. |
| 1.3.6.1.4.1.25506.2.3.5.2 | Scalarhh3cSysPatchInstallFailChassis | accessible-for-notify | current | Number of the chassis that fails to install the patch package. |
| 1.3.6.1.4.1.25506.2.3.5.3 | Scalarhh3cSysPatchInstallFailSlot | accessible-for-notify | current | Number of the slot that fails to install the patch package. |
| 1.3.6.1.4.1.25506.2.3.5.4 | Scalarhh3cSysPatchInstallFailCpu | accessible-for-notify | current | Number of the CPU that fails to install the patch package. |
| 1.3.6.1.4.1.25506.2.3.5.5 | Scalarhh3cSysPVFPhysicalName | accessible-for-notify | current | Name of the location where a software image package fails validation. |
| 1.3.6.1.4.1.25506.2.3.5.6 | Scalarhh3cSysPVFPackageName | accessible-for-notify | current | Name of the software image package that fails validation. |
| 1.3.6.1.4.1.25506.2.3.5.7 | Scalarhh3cSysPVFFailReason | accessible-for-notify | current | Reason for package validation failure. |