HH3C-USERLOG-MIB
70 objects
The HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
Imported Objects
| HH3C-OID-MIB | hh3cRhw |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.8.18 | Identityhh3cUserLogMIB | The HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature. | ||
| 1.3.6.1.4.1.25506.8.18.1 | Nodehh3cUserlogObjects | |||
| 1.3.6.1.4.1.25506.8.18.1.1 | Nodehh3cUserlogNatObjects | |||
| 1.3.6.1.4.1.25506.8.18.1.1.1 | Scalarhh3cUserlogNatVersion | read-only | current | NAT LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.25506.8.18.1.1.2 | Scalarhh3cUserlogNatSyslog | read-write | current | NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.25506.8.18.1.1.3 | Scalarhh3cUserlogNatSourceIP | read-write | current | The Source IP address of NAT LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.1.4 | Scalarhh3cUserlogNatFlowBegin | read-write | current | Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor require… |
| 1.3.6.1.4.1.25506.8.18.1.1.5 | Scalarhh3cUserlogNatActiveTime | read-write | current | The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of act… |
| 1.3.6.1.4.1.25506.8.18.1.1.6 | Tablehh3cUserlogNatSlotCfgInfoTable | not-accessible | current | A table of NAT LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1 | Rowhh3cUserlogNatSlotCfgInfoEntry | not-accessible | current | NAT LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1.1 | Columnhh3cUserlogNatCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with NAT LOG. |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1.2 | Columnhh3cUserlogNatEnable | read-write | current | The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled. |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1.3 | Columnhh3cUserlogNatAclNumber | read-write | current | Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logge… |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1.4 | Columnhh3cUserlogNatHostAddress | read-write | current | The IP address of NAT LOG server. |
| 1.3.6.1.4.1.25506.8.18.1.1.6.1.5 | Columnhh3cUserlogNatUdpPort | read-write | current | The UDP Port Number of NAT LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.1.7 | Tablehh3cUserlogNatSlotRunInfoTable | not-accessible | current | A table of NAT LOG running information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1 | Rowhh3cUserlogNatSlotRunInfoEntry | not-accessible | current | NAT LOG Running Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.1 | Columnhh3cUserlogNatRunSlotNumber | read-only | current | Slot number. Specify on which slot the NAT LOG statistics displayed. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.2 | Columnhh3cUserlogNatTotalEntries | read-only | current | The total number of NAT flow entries which are logged. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.3 | Columnhh3cUserlogNatTotalPackets | read-only | current | The total number of NAT LOG UDP packets generated by the router. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.4 | Columnhh3cUserlogNatFailedEntries | read-only | current | The total number of NAT flow entries failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.5 | Columnhh3cUserlogNatFailedPackets | read-only | current | The total number of NAT LOG UDP packets failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.1.7.1.6 | Columnhh3cUserlogNatClearRunStat | read-write | current | Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.25506.8.18.1.2 | Nodehh3cUserlogFlowObjects | |||
| 1.3.6.1.4.1.25506.8.18.1.2.1 | Scalarhh3cUserlogFlowVersion | read-only | current | BAS FLOW LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.25506.8.18.1.2.2 | Scalarhh3cUserlogFlowSyslog | read-write | current | BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.25506.8.18.1.2.3 | Scalarhh3cUserlogFlowSourceIP | read-write | current | The Source IP address of BAS FLOW LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.2.4 | Scalarhh3cUserlogFlowFlowBegin | read-write | current | Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor require… |
| 1.3.6.1.4.1.25506.8.18.1.2.5 | Scalarhh3cUserlogFlowActiveTime | read-write | current | The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of act… |
| 1.3.6.1.4.1.25506.8.18.1.2.6 | Tablehh3cUserlogFlowSlotCfgInfoTable | not-accessible | current | A table of BAS FLOW LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1 | Rowhh3cUserlogFlowSlotCfgInfoEntry | not-accessible | current | BAS FLOW LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1.1 | Columnhh3cUserlogFlowCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with BAS FLOW LOG. |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1.2 | Columnhh3cUserlogFlowEnable | read-write | current | The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled. |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1.3 | Columnhh3cUserlogFlowAclNumber | read-write | current | Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be … |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1.4 | Columnhh3cUserlogFlowHostAddress | read-write | current | The IP address of BAS FLOW LOG server. |
| 1.3.6.1.4.1.25506.8.18.1.2.6.1.5 | Columnhh3cUserlogFlowUdpPort | read-write | current | The UDP Port Number of BAS FLOW LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.2.7 | Tablehh3cUserlogFlowSlotRunInfoTable | not-accessible | current | A table of BAS FLOW LOG running information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1 | Rowhh3cUserlogFlowSlotRunInfoEntry | not-accessible | current | Running Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.1 | Columnhh3cUserlogFlowRunSlotNumber | read-only | current | Slot number. Specify on which slot the BAS FLOW LOG statistics displayed. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.2 | Columnhh3cUserlogFlowTotalEntries | read-only | current | The total number of BAS FLOW Entries which are logged. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.3 | Columnhh3cUserlogFlowTotalPackets | read-only | current | The total number of FLOW LOG UDP packet generated by the router. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.4 | Columnhh3cUserlogFlowFailedEntries | read-only | current | The total number of BAS FLOW entries failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.5 | Columnhh3cUserlogFlowFailedPackets | read-only | current | The total number of BAS FLOW LOG UDP packet failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.2.7.1.6 | Columnhh3cUserlogFlowClearRunStat | read-write | current | Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.25506.8.18.1.3 | Nodehh3cUserlogAccessObjects | |||
| 1.3.6.1.4.1.25506.8.18.1.3.1 | Scalarhh3cUserlogAccessVersion | read-only | current | BAS ACCESS LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.25506.8.18.1.3.2 | Scalarhh3cUserlogAccessSyslog | read-write | current | BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.25506.8.18.1.3.3 | Scalarhh3cUserlogAccessSourceIP | read-write | current | The Source IP address of BAS ACCESS LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.3.4 | Tablehh3cUserlogAccessSlotCfgInfoTable | not-accessible | current | A table of BAS ACCESS LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.3.4.1 | Rowhh3cUserlogAccessSlotCfgInfoEntry | not-accessible | current | BAS ACCESS LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.3.4.1.1 | Columnhh3cUserlogAccessCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with BAS ACCESS LOG. |
| 1.3.6.1.4.1.25506.8.18.1.3.4.1.2 | Columnhh3cUserlogAccessEnable | read-write | current | The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled. |
| 1.3.6.1.4.1.25506.8.18.1.3.4.1.3 | Columnhh3cUserlogAccessHostAddress | read-write | current | The IP address of BAS ACCESS LOG server. |
| 1.3.6.1.4.1.25506.8.18.1.3.4.1.4 | Columnhh3cUserlogAccessUdpPort | read-write | current | The UDP Port Number of BAS ACCESS LOG UDP packet. |
| 1.3.6.1.4.1.25506.8.18.1.3.5 | Tablehh3cUserlogAccessSlotRunInfoTable | not-accessible | current | A table of BAS ACCESS LOG running information for the specified slot. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1 | Rowhh3cUserlogAccessSlotRunInfoEntry | not-accessible | current | Running Information Entry for a slot. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.1 | Columnhh3cUserlogAccessRunSlotNumber | read-only | current | Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.2 | Columnhh3cUserlogAccessTotalEntries | read-only | current | The total number of BAS ACCESS Records which are logged. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.3 | Columnhh3cUserlogAccessTotalPackets | read-only | current | The total number of ACCESS LOG UDP packet generated by the router. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.4 | Columnhh3cUserlogAccessFailedEntries | read-only | current | The total number of BAS ACCESS entries failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.5 | Columnhh3cUserlogAccessFailedPackets | read-only | current | The total number of BAS ACCESS LOG UDP packet failed in outputting. |
| 1.3.6.1.4.1.25506.8.18.1.3.5.1.6 | Columnhh3cUserlogAccessClearRunStat | read-write | current | Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.25506.8.18.2 | Nodehh3cUserlogNotifications | |||
| 1.3.6.1.4.1.25506.8.18.3 | Nodehh3cUserlogConformance | |||
| 1.3.6.1.4.1.25506.8.18.3.1 | Nodehh3cUserlogCompliances | |||
| 1.3.6.1.4.1.25506.8.18.3.1.1 | Compliancehh3cUserlogCompliance | current | The compliance statement for entities which implement the Userlog mib. | |
| 1.3.6.1.4.1.25506.8.18.3.2 | Nodehh3cUserlogGroups | |||
| 1.3.6.1.4.1.25506.8.18.3.2.1 | Grouphh3cUserlogMandatoryGroup | current | A collection of objects providing mandatory Userlog information. | |
| 1.3.6.1.4.1.25506.8.18.3.2.2 | Grouphh3cUserlogConfigGroup | current | All configurable parameters of Userlog feature. | |
| 1.3.6.1.4.1.25506.8.18.3.2.3 | Grouphh3cUserlogInfoGroup | current | All running information of Userlog feature. |