MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HH3C-VOICE-CALL-ACTIVE-MIB

22 objects

This MIB file is to provide the definition of voice call active record information.

Imported Objects

DIAL-CONTROL-MIB	callActiveIndex callActiveSetupTime
HH3C-OID-MIB	hh3cVoice
HH3C-VOICE-DIAL-CONTROL-MIB	Hh3cCodecType
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-SMI	Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC	TEXTUAL-CONVENTION

OID	Name	Access	Status	Description
1.3.6.1.4.1.25506.2.39.15	Identityhh3cVoCallActive			This MIB file is to provide the definition of voice call active record information.
1.3.6.1.4.1.25506.2.39.15.1	Nodehh3cVoiceCallActiveObjects
1.3.6.1.4.1.25506.2.39.15.1.1	Tablehh3cVoiceCallActiveTable	not-accessible	current	This table is the voice extension to the call active table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the s…
1.3.6.1.4.1.25506.2.39.15.1.1.1	Rowhh3cVoiceCallActiveEntry	not-accessible	current	The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by call active …
1.3.6.1.4.1.25506.2.39.15.1.1.1.1	Columnhh3cVoCallActiveConnectionId	read-only	current	The global call identifier for the gateway call.
1.3.6.1.4.1.25506.2.39.15.1.1.1.2	Columnhh3cVoCallActiveTxDuration	read-only	current	Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds.
1.3.6.1.4.1.25506.2.39.15.1.1.1.3	Columnhh3cVoCallActiveVoiceTxDuration	read-only	current	Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by hh3cVoCallActiveTXD…
1.3.6.1.4.1.25506.2.39.15.1.1.1.4	Columnhh3cVoCallActiveFaxTxDuration	read-only	current	Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by hh3cVoCallActiveTXDurat…
1.3.6.1.4.1.25506.2.39.15.1.1.1.5	Columnhh3cVoCallActiveCoderType	read-only	current	The negotiated coder type. It specifies the encode type to the PSTN leg of a call.
1.3.6.1.4.1.25506.2.39.15.1.1.1.6	Columnhh3cVoCallActiveImgPageCount	read-only	current	The number of fax related image pages are received or transmitted via the peer for the call. The units is pages.
1.3.6.1.4.1.25506.2.39.15.1.2	Tablehh3cVoiceVoIPCallActiveTable	not-accessible	current	This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination.
1.3.6.1.4.1.25506.2.39.15.1.2.1	Rowhh3cVoiceVoIPCallActiveEntry	not-accessible	current	The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-C…
1.3.6.1.4.1.25506.2.39.15.1.2.1.1	Columnhh3cVoVoIPCallActiveConnectionId	read-only	current	The global call identifier for the gateway call.
1.3.6.1.4.1.25506.2.39.15.1.2.1.2	Columnhh3cVoVoIPCallActiveRemSigIPType	read-only	current	The type of remote system signalling IP address for the VoIP call.
1.3.6.1.4.1.25506.2.39.15.1.2.1.3	Columnhh3cVoVoIPCallActiveRemSigIPAddr	read-only	current	Remote system signalling IP address for the VoIP call.
1.3.6.1.4.1.25506.2.39.15.1.2.1.4	Columnhh3cVoVoIPCallActiveRemSigPort	read-only	current	Remote system UDP listener signalling port to which to transmit voice packets.
1.3.6.1.4.1.25506.2.39.15.1.2.1.5	Columnhh3cVoVoIPCallActiveRemMedIPType	read-only	current	The type of remote system media IP address for the VoIP call.
1.3.6.1.4.1.25506.2.39.15.1.2.1.6	Columnhh3cVoVoIPCallActiveRemMedIPAddr	read-only	current	Remote system media IP address for the VoIP call.
1.3.6.1.4.1.25506.2.39.15.1.2.1.7	Columnhh3cVoVoIPCallActiveRemMedPort	read-only	current	Remote system UDP listener media port to which to transmit voice packets.
1.3.6.1.4.1.25506.2.39.15.1.2.1.8	Columnhh3cVoVoIPCallActiveSessProtocol	read-only	current	The object specifies the session protocol to be used for internet call between local and remote router via IP backbone.
1.3.6.1.4.1.25506.2.39.15.1.2.1.9	Columnhh3cVoVoIPCallActiveCoderType	read-only	current	The negotiated coder type. It specifies the encode type to the VoIP leg of a call.

Type Definitions

Name	Syntax	Status	Description
Hh3cGUid	OCTET STRING(SIZE(0..16))	current	Represents a global call identifier. The global call identifier is used as an unique identifier for an end-to-end call. A zero length Hh3cGUid indicates no value for the global call identifier.