HITRON-CABLE-MODEM-MIB
85 objects
This is the MIB module for Hitron DOCSIS compliant Cable Modem.
Imported Objects
| HITRON-MIB | hitronMib |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595.2 | IdentityhitronDOCSIS | This is the MIB module for Hitron DOCSIS compliant Cable Modem. | ||
| 1.3.6.1.4.1.8595.2.1 | NodehitronCm | |||
| 1.3.6.1.4.1.8595.2.1.1 | NodehitronCmScanningParameters | |||
| 1.3.6.1.4.1.8595.2.1.1.1 | ScalarhitronScanFreqStart | read-write | current | This object is the Lowest downstream channel center frequency in the scan range before wraping back to HighDownstreamChannelFreq. For US, this value must be be… |
| 1.3.6.1.4.1.8595.2.1.1.2 | ScalarhitronScanFreqStop | read-write | current | This object is the Highest downstream channel center frequency in the scan range before wraping back to LowDownstreamChannelFreq. For US, this value must be be… |
| 1.3.6.1.4.1.8595.2.1.1.3 | ScalarhitronFrequencyPlanInUse | read-write | current | If provied, only scan this frequency plan, if USA, scan IRC first and then scan HRC. The AUTO is for Euro-Board only. if provided, will try both of Docsis and … |
| 1.3.6.1.4.1.8595.2.1.1.4 | ScalarhitronDirectionToScan | read-write | current | The object is the direction of the scanning. |
| 1.3.6.1.4.1.8595.2.1.1.5 | ScalarhitronEuropeanScanStep | read-write | current | It is only apply for Europe-like frequency scanning, including euro and auto plan . The scanning step represents how many steps will be skiped for the next cha… |
| 1.3.6.1.4.1.8595.2.1.1.6 | TablehitronGoldFreqProvTable | not-accessible | current | This table defines the set of downstream channel frequencies to scan before any other channel frequencies. The lowest index entries are searched first, skippin… |
| 1.3.6.1.4.1.8595.2.1.1.6.1 | RowhitronGoldFreqProvEntry | not-accessible | current | Each entry defines a downstream channel frequency to scan first during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.6.1.1 | ColumnhitronGoldProvIndex | not-accessible | current | The index of the Provisioned Gold List entry |
| 1.3.6.1.4.1.8595.2.1.1.6.1.2 | ColumnhitronGoldProvStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.8595.2.1.1.6.1.3 | ColumnhitronGoldProvFrequency | read-write | current | The Golden Frequency used during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.7 | TablehitronGoldFreqLearnedTable | not-accessible | current | Learned Golden Frequencies. A frequency will be entered into this table once the modem has succesfully registered on it. |
| 1.3.6.1.4.1.8595.2.1.1.7.1 | RowhitronGoldFreqLearnedEntry | not-accessible | current | Each entry defines a downstream channel freuency to scan first during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.7.1.1 | ColumnhitronGoldLearnedIndex | not-accessible | current | The index of the Learned Gold List entry |
| 1.3.6.1.4.1.8595.2.1.1.7.1.2 | ColumnhitronGoldLearnedFrequency | read-write | current | The Learned Gold frequency learned. It is not possible to modify the value of this frequency to any other value than '0'. Setting a value to '0' will delete th… |
| 1.3.6.1.4.1.8595.2.1.1.8 | TablehitronBlackFreqProvTable | not-accessible | current | This table defines the set of downstream channel frequencies to be skipped from scanning. The skipping should happen during the whole channel plan scanning. Al… |
| 1.3.6.1.4.1.8595.2.1.1.8.1 | RowhitronBlackFreqProvEntry | not-accessible | current | Each entry defines a downstream channel frequency to be skipped during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.8.1.1 | ColumnhitronBlackProvIndex | not-accessible | current | The index of the Provisioned Black List entry |
| 1.3.6.1.4.1.8595.2.1.1.8.1.2 | ColumnhitronBlackProvStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.8595.2.1.1.8.1.3 | ColumnhitronBlackProvFrequency | read-write | current | The Black Frequency to be skipped during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.9 | TablehitronBlackFreqLearnedTable | not-accessible | current | Learned Black Frequencies. A frequency will be entered into this table once the modem has succesfully locked it, but unable to get the DOCSIS messages or unabl… |
| 1.3.6.1.4.1.8595.2.1.1.9.1 | RowhitronBlackFreqLearnedEntry | not-accessible | current | Each entry defines a downstream channel freuency to be skipped during scanning. |
| 1.3.6.1.4.1.8595.2.1.1.9.1.1 | ColumnhitronBlackLearnedIndex | not-accessible | current | The index of the Learned Black List entry |
| 1.3.6.1.4.1.8595.2.1.1.9.1.2 | ColumnhitronBlackLearnedFrequency | read-write | current | The Learned Black frequency learned. It is not possible to modify the value of this frequency to any other value than '0'. Setting a value to '0' will delete t… |
| 1.3.6.1.4.1.8595.2.1.1.10 | ScalarhitronSelectISP | read-write | current | This OID allows for several ISP on the same cable network as it sets a ISP identifier in CM non-volatile memory. The configuration file needs to contain a vend… |
| 1.3.6.1.4.1.8595.2.1.2 | NodehitronCmManagementParameters | |||
| 1.3.6.1.4.1.8595.2.1.2.1 | ScalarhitronCmDhcpServerEnable | read-write | obsolete | This object is used to enable/disable DHCP Local Server. As long as CM is not operational, local DHCP Server is working if enabled. Set to true(1) to enable DH… |
| 1.3.6.1.4.1.8595.2.1.2.2 | TablehitronCmDaemonAccessTable | not-accessible | current | This table allows control of accessing the CM daemons, like TELNET, HTTP and SNMP. |
| 1.3.6.1.4.1.8595.2.1.2.2.1 | RowhitronCmDaemonAccessEntry | not-accessible | current | Allow configuration for accessing control of different cable modem daemons from different interfaces. |
| 1.3.6.1.4.1.8595.2.1.2.2.1.1 | ColumnhitronCmDaemonCapability | not-accessible | current | The daemon list that is controlled by this entry. SNMP is only supported on 3.0 products. |
| 1.3.6.1.4.1.8595.2.1.2.2.1.2 | ColumnhitronCmDaemonAccessible | read-write | current | When flag(s) is enabled ((cpe/rfi)AccessEnabled = 1) indicates that access through specific interface(s) is enable. If disabled(=0), indicates that any daemon … |
| 1.3.6.1.4.1.8595.2.1.2.3 | ScalarhitronResetFactory | read-write | current | Reset the unit to factory default. this will also wipe any learned golden frequencies and reset the unit to the state as from factory. WARNING: the behaviour o… |
| 1.3.6.1.4.1.8595.2.1.2.4 | ScalarhitronCmIGMPMaxStreams | read-write | current | This object allows the setting of the maximum number of multicast streams the unit will bridge at the same time. This is done by snooping the IGMP-Join message… |
| 1.3.6.1.4.1.8595.2.1.2.5 | ScalarhitronCmIGMPTimeout | read-write | current | This OID determines the Maximum delay for passive mode IGMP Membership reports in 1/10th of seconds. This timer has a default value of 3 seconds therefore a va… |
| 1.3.6.1.4.1.8595.2.1.2.7 | ScalarhitronHttpPasswordControl | read-write | current | This OID allows to enable/disable of the password control of http access on the device, For BVG-3653 series (SIP and MGCP version, US or Euro version), the def… |
| 1.3.6.1.4.1.8595.2.1.2.8 | ScalarhitronTurboDoxControl | read-write | current | Config PP and Turbodox control. enabled(1): PP and Tdox On. tdoxdisabled(2): PP on Tdox off. disabled(3): PP and Tdox off. |
| 1.3.6.1.4.1.8595.2.1.2.9 | ScalarhitronMaxCpesControl | read-write | current | Config MAX CPES settings. |
| 1.3.6.1.4.1.8595.2.1.2.10 | TablehitronCmUserPasswordTable | not-accessible | current | This table allows configuration of change user password |
| 1.3.6.1.4.1.8595.2.1.2.10.1 | RowhitronCmUserPasswordEntry | not-accessible | current | Allow configuration for change user password by role. |
| 1.3.6.1.4.1.8595.2.1.2.10.1.1 | ColumnhitronCmUserRole | not-accessible | current | Select User Role |
| 1.3.6.1.4.1.8595.2.1.2.10.1.2 | ColumnhitronCmPassword | read-write | current | Set password for the selected user in hitronCmUserRole. For dump CM products, only admin user is supported. So, for other user role, the password setting would… |
| 1.3.6.1.4.1.8595.2.1.2.13 | ScalarhitronDisplayIpInformation | read-write | current | This OID controls whether the status page displays IP information. Default: True. When set to False the <Cable Modem IP> block is not shown |
| 1.3.6.1.4.1.8595.2.1.2.14 | ScalarhitronDisplayCmConfig | read-write | current | When this OID is set to false, the CM configuration file name and the nework access rows in the web page are NOT displayed. |
| 1.3.6.1.4.1.8595.2.1.2.15 | ScalarhitronConsoleEnable | read-write | current | When this OID is set to true, the console for both the Uboot and Application is active and can be used |
| 1.3.6.1.4.1.8595.2.1.2.16 | ScalarhitronForceDOCSIS20 | read-write | current | If this flag is set to true, the CM would behave like a D2 CM even under a D3 environment. |
| 1.3.6.1.4.1.8595.2.1.2.17 | ScalarhitronDocsisMode | read-only | current | Display the CM DOCSIS opearation mode and Downstream and Upstream online number. For example, if it's 24x8 Full D3 locked, the value is 01000000000000000000000… |
| 1.3.6.1.4.1.8595.2.1.2.18 | ScalarhitronMddIpModeOverride | read-write | current | hitronMddIpModeOverride is used to change the DHCP process mode. |
| 1.3.6.1.4.1.8595.2.1.2.19 | ScalarhitronMaxT3Count | read-write | current | This is controls MAX T3 count . |
| 1.3.6.1.4.1.8595.2.1.2.20 | ScalarhitronUsHighPowerPlusOffset | read-write | current | This OID is to extra US power beyond the DOCSIS spec. Its unit is in dBmv. |
| 1.3.6.1.4.1.8595.2.1.2.21 | NodehitronGuiDisplayCtrl | |||
| 1.3.6.1.4.1.8595.2.1.2.21.1 | ScalarhitronGuiDisplayCableStatus | read-write | current | This OID controls whether the cable status page would be displayed. Default: True. When set to False the whole cable status tab should not be displayed. |
| 1.3.6.1.4.1.8595.2.1.2.21.2 | ScalarhitronGuiDisplayIpInformation | read-write | current | This OID controls whether the cable status page displays IP information. Default: True. When set to False the <Cable Modem IP> block is not shown |
| 1.3.6.1.4.1.8595.2.1.2.21.3 | ScalarhitronGuiDisplayDsTune | read-write | current | When this OID is set to false, the downstream setting column in the cable status page is hidden and disabled. |
| 1.3.6.1.4.1.8595.2.1.2.21.4 | ScalarhitronGuiDisplayDsDisplay | read-write | current | When this OID is set to false, the downstream display table in the cable status page is hidden and disabled. |
| 1.3.6.1.4.1.8595.2.1.2.21.5 | ScalarhitronGuiDisplayUsTune | read-write | current | When this OID is set to false, the upstream setting column in the cable status page is hidden and disabled. |
| 1.3.6.1.4.1.8595.2.1.2.21.6 | ScalarhitronGuiDisplayUsDisplay | read-write | current | When this OID is set to false, the upstream display table in the cable status page is hidden and disabled. |
| 1.3.6.1.4.1.8595.2.1.2.23 | ScalarhitronDocsis32x8Mode | read-only | current | Display the CM DOCSIS opearation mode and Downstream and Upstream online number. For example, if it's 24x8 Full D3 locked, the value is 01000000000000000000000… |
| 1.3.6.1.4.1.8595.2.1.3 | NodehitronCmImageParameters | |||
| 1.3.6.1.4.1.8595.2.1.3.1 | TablehitronDeviceDloadTable | not-accessible | current | This table controls device download list for different HWID, Model and download server and download image filename. |
| 1.3.6.1.4.1.8595.2.1.3.1.1 | RowhitronDeviceDloadEntry | not-accessible | current | An entry describing a complete row for HW ID, HW Model, download server IP and download image filename. |
| 1.3.6.1.4.1.8595.2.1.3.1.1.1 | ColumnhitronDeviceDloadIndex | not-accessible | current | Index used to order the download device entries. |
| 1.3.6.1.4.1.8595.2.1.3.1.1.2 | ColumnhitronCVCp1 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.3 | ColumnhitronCVCp2 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.4 | ColumnhitronCVCp3 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.5 | ColumnhitronCVCp4 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.6 | ColumnhitronCVCp5 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.7 | ColumnhitronCVCp6 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.8 | ColumnhitronCVCp7 | read-create | current | This object is used to check against the CVC header in the signed CM image. It is part of the CVC header of the signed image. This item should combine sequenti… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.9 | ColumnhitronHardwareId | read-create | current | The Hardware ID which is used by the receiving device to check against its own harware ID. If the checking is failed, no image upgrade should be performed. The… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.10 | ColumnhitronHardwareModel | read-create | current | The Hardware model name which is used by the receiving device to check against its own harware model name. If the checking is failed, no image upgrade should b… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.11 | ColumnhitronSwServer | read-create | current | The tftp server IP address which is used for image upgrade. |
| 1.3.6.1.4.1.8595.2.1.3.1.1.12 | ColumnhitronSwFilename | read-create | current | The image filename which is used for image upgrade. |
| 1.3.6.1.4.1.8595.2.1.3.1.1.13 | ColumnhitronDeviceDloadStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.8595.2.1.3.1.1.14 | ColumnhitronIPv6SwServer | read-create | current | The IPv6 tftp server IP address which is used for image upgrade. For OID hitronSwServer and hitronIPv6SwServer, only one should be used. If both of them exist … |
| 1.3.6.1.4.1.8595.2.1.3.2 | ScalarhitronFlashActiveImage | read-only | current | This object display the current active image segamenet. |
| 1.3.6.1.4.1.8595.2.1.3.3 | TablehitronFlashImageTable | not-accessible | current | A list of images version and filename in flash. |
| 1.3.6.1.4.1.8595.2.1.3.3.1 | RowhitronFlashImageEntry | not-accessible | current | list entry for each image segament in flash. |
| 1.3.6.1.4.1.8595.2.1.3.3.1.1 | ColumnhitronFlashImageIndex | not-accessible | current | The image segament number. |
| 1.3.6.1.4.1.8595.2.1.3.3.1.2 | ColumnhitronFlashVersion | read-only | current | The software version in the indexed segament in the flash. |
| 1.3.6.1.4.1.8595.2.1.3.3.1.3 | ColumnhitronFlashFilename | read-only | current | The image filename in the indexed segament in the flash. |
| 1.3.6.1.4.1.8595.2.1.4 | NodehitronCmExtendedParameters | |||
| 1.3.6.1.4.1.8595.2.1.4.1 | ScalarhitronUsFreqRange | read-only | current | This attribute indicates the CM's upstream frequency range |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SnmpAdminString | OCTET STRING (SIZE (0..255)) | current | An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an oct… |