HITRON-CM-EMTA-MIB
18 objects
The MIB module to describe the Hitron eMTA private management functions.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises experimental Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE private transmission Unsigned32 |
| SNMPv2-TC | DateAndTime TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595 | NodehitronMib | |||
| 1.3.6.1.4.1.8595.3653 | NodeeMTAType | |||
| 1.3.6.1.4.1.8595.3653.10 | IdentityhitronCMEmta | The MIB module to describe the Hitron eMTA private management functions. | ||
| 1.3.6.1.4.1.8595.3653.10.1 | NodehitronCMEmtaBase | |||
| 1.3.6.1.4.1.8595.3653.10.1.1 | ScalarhtCMInhibitSwDownloadDuringCall | read-write | current | This object controls the processing logic of software downloading requests when there are specific telephony related EMTA activities. If this object has a valu… |
| 1.3.6.1.4.1.8595.3653.10.1.2 | ScalarhtCMEmtaEnable | read-write | current | This object controls the functioning of the EMTA. When this is set to False, the EMTA will be completely disabled. For online configuration of phone-lines, ple… |
| 1.3.6.1.4.1.8595.3653.10.1.3 | ScalarhtCMEmtaEuroPacketCableEnable | read-write | current | This object controls the EuroPacketCable operation of the EMTA. When this is set to False, the EMTA will be run under PacketCable mode. When this is set to tur… |
| 1.3.6.1.4.1.8595.3653.10.1.4 | ScalarhtCMEmtaProvisioningFlow | read-write | current | Control the PACM_CONFIG_PROVISION_FLOWS_SUPPORT value. 0x80 would support only security flow. 0xe0 would support basic, hybrid and security flow. The default v… |
| 1.3.6.1.4.1.8595.3653.10.1.5 | ScalarhtCMEmtaConfigeHashType | read-write | current | Control the hash type of the eMTA's configfile. |
| 1.3.6.1.4.1.8595.3653.10.1.8 | ScalarhtCMEmtaVoiceStack | read-write | current | Control the code voice stack for mixed image. The default voice stack is MGCP code. IMS code does not support temporarily. If file of voice_stack is set incorr… |
| 1.3.6.1.4.1.8595.3653.10.1.9 | ScalarhtCMEmtaVoiceStackRun | read-only | current | get current running voice stack. |
| 1.3.6.1.4.1.8595.3653.10.2 | NodehitronCMEmtaMaintenance | |||
| 1.3.6.1.4.1.8595.3653.10.2.1 | ScalarhtCMEmtaMaintenanceWindowBegin | read-write | current | This object identifies the start of an eMTA maintenance window. A maintenance window is a period of time during which the ISP may perform network maintenance o… |
| 1.3.6.1.4.1.8595.3653.10.2.2 | ScalarhtCMEmtaMaintenanceWindowDuration | read-write | current | This object identifies the duration, in seconds, of an eMTA maintenance window. Setting the value of this object to the default value of zero will cancel the m… |
| 1.3.6.1.4.1.8595.3653.10.2.3 | ScalarhtCMEmtaMaintenanceControlMask | read-write | current | This object identifies the bit mask to control the line voltage behavior of the eMTA in various scenarios: maintenanceOnCmReset(0) - if this bit is set to 1 it… |
| 1.3.6.1.4.1.8595.3653.10.2.4 | ScalarhtCMEmtaMaintenanceQuarantineTimeout | read-write | current | This object identifies the length of time, in seconds, that the MTA should maintain the line voltage after any of the endpoints enters the quarantine state. If… |
| 1.3.6.1.4.1.8595.3653.10.2.5 | ScalarhtCMEmtaMaintenanceDisconnectedTimeout | read-write | current | This object identifies the length of time, in seconds, that the MTA should maintain the line voltage after any of the endpoints is disconnected. If any of the … |
| 1.3.6.1.4.1.8595.3653.10.2.6 | ScalarhtCMEmtaMaintenanceRFDisconnectTimeout | read-write | current | This object identifies the length of time, in seconds, that the MTA should maintain the line voltage after the RF lock with the CMTS is lost. If the MTA remain… |