HITRON-EMTA-DEV-MIB
78 objects
The MIB module to describe the Hitron eMTA private management functions.
Imported Objects
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 enterprises experimental Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE private transmission Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595 | NodehitronMib | |||
| 1.3.6.1.4.1.8595.3653 | NodeeMTAType | |||
| 1.3.6.1.4.1.8595.3653.9 | IdentityhitronemtaDev | The MIB module to describe the Hitron eMTA private management functions. | ||
| 1.3.6.1.4.1.8595.3653.9.1 | TablehtEmtaDevSummCallPackStatTable | not-accessible | current | A list of Call entries |
| 1.3.6.1.4.1.8595.3653.9.1.1 | RowhtEmtaDevSummCallPackStatEntry | not-accessible | current | parameters for Call. |
| 1.3.6.1.4.1.8595.3653.9.1.1.1 | ColumnhtEmtaDevSummCallPackStatIndex | not-accessible | current | The current call index. |
| 1.3.6.1.4.1.8595.3653.9.1.1.2 | ColumnhtEmtaDevDirecOfCall | read-only | current | This is the direction of the call:incoming(0)/outgoing(1). |
| 1.3.6.1.4.1.8595.3653.9.1.1.3 | ColumnhtEmtaDevAverageDelay | read-only | current | This is the average network latency across the call. |
| 1.3.6.1.4.1.8595.3653.9.1.1.4 | ColumnhtEmtaDevInterarrivalJitter | read-only | current | This is the estimate of the statistical variance of the RTP data packet interarrival time over all the lines |
| 1.3.6.1.4.1.8595.3653.9.1.1.5 | ColumnhtEmtaDevReceivedOctets | read-only | current | This is the total number of RTP octets that our device received |
| 1.3.6.1.4.1.8595.3653.9.1.1.6 | ColumnhtEmtaDevSentOctets | read-only | current | This is the total number of RTP octets that our device sent |
| 1.3.6.1.4.1.8595.3653.9.1.1.7 | ColumnhtEmtaDevSentPackets | read-only | current | This is the total number of RTP packets that our device sent |
| 1.3.6.1.4.1.8595.3653.9.1.1.8 | ColumnhtEmtaDevReceivedPackets | read-only | current | This is the total number of RTP packets that our device received |
| 1.3.6.1.4.1.8595.3653.9.1.1.9 | ColumnhtEmtaDevLostPackets | read-only | current | This is the total number of RTP packets that our device lost |
| 1.3.6.1.4.1.8595.3653.9.1.1.10 | ColumnhtEmtaDevRemoteSentOctets | read-only | current | This is the total number of RTP octets that the remote device sent(remote device: the one who make a call with our device) |
| 1.3.6.1.4.1.8595.3653.9.1.1.11 | ColumnhtEmtaDevRemoteSentPackets | read-only | current | This is the total number of RTP packets that the remote device sent |
| 1.3.6.1.4.1.8595.3653.9.1.1.12 | ColumnhtEmtaDevRemoteLostPackets | read-only | current | This is the total number of RTP packets that the remote device lost |
| 1.3.6.1.4.1.8595.3653.9.1.1.13 | ColumnhtEmtaDevRemotejitter | read-only | current | This is the remote device's mean jitter |
| 1.3.6.1.4.1.8595.3653.9.1.1.14 | ColumnhtEmtaDevMosLQ | read-only | current | This is the listen MOS(downstream) score. |
| 1.3.6.1.4.1.8595.3653.9.1.1.15 | ColumnhtEmtaDevMosCQ | read-only | current | This is the call MOS(upstream) score. |
| 1.3.6.1.4.1.8595.3653.9.1.1.16 | ColumnhtEmtaDevCallStartTime | read-only | current | This is the call start time. |
| 1.3.6.1.4.1.8595.3653.9.1.1.17 | ColumnhtEmtaDevCallEndTime | read-only | current | This is the call end time. |
| 1.3.6.1.4.1.8595.3653.9.1.1.18 | ColumnhtEmtaDevCallDurTime | read-only | current | This is the call duration time |
| 1.3.6.1.4.1.8595.3653.9.2 | NodehtEmtaDevGR909 | |||
| 1.3.6.1.4.1.8595.3653.9.2.1 | ScalarhtEmtaDevGR909Enable | read-write | current | Controls the enable/disable of GR909 tests. If set to true(1), the GR909 tests could be performed. Also, this OID would be used to enable/disable the display o… |
| 1.3.6.1.4.1.8595.3653.9.2.2 | ScalarhtEmtaDevGR909TestLine | read-write | current | The line number. 1 means line1. 2 means line2. |
| 1.3.6.1.4.1.8595.3653.9.2.3 | ScalarhtEmtaDevGR909TestType | read-write | current | The type of GR909 test. The readback value of this OID would always be 0,disabled. If users want to perform a particular test item, the type needs to be select… |
| 1.3.6.1.4.1.8595.3653.9.2.4 | ScalarhtEmtaDevGR909TestResult | read-only | current | The test result of the GR909 test. If some test is performed, its result would be displayed as pass/fail or non-supported. If the hitronEmtaGR909TestType is se… |
| 1.3.6.1.4.1.8595.3653.9.3 | NodehtEmtaDevCommunity | |||
| 1.3.6.1.4.1.8595.3653.9.3.1 | ScalarhtEmtaDevCommunityRead | read-write | obsolete | This object controls the value of the default read community string. By default this has the value public. |
| 1.3.6.1.4.1.8595.3653.9.3.2 | ScalarhtEmtaDevCommunityWrite | read-write | obsolete | This object controls the value of the defalt write community string. By default this has the value private for SIP versions, and public for MGCP versions. |
| 1.3.6.1.4.1.8595.3653.9.4 | NodehtEmtaDevQos | |||
| 1.3.6.1.4.1.8595.3653.9.4.1 | ScalarhtEmtaDevConfigQOSEnable | read-write | current | Control the enable/disable of the eMTA's QOS. Default value for SIP code is true and false for MGCP code. |
| 1.3.6.1.4.1.8595.3653.9.4.2 | ScalarhtEmtaDevConfigQOSBandwidthIncreasePercent | read-write | current | Control the percent of the Bandwidth increase for the eMTA's QOS. |
| 1.3.6.1.4.1.8595.3653.9.4.3 | ScalarhtEmtaDevConfigQOSBandwidthMaxDSSusRate | read-write | current | Control DS MAXSusRate Bandwidth for the eMTA's QOS for DS. The MaxSusRate used by the QoS is this OID times the MinRsvRate. |
| 1.3.6.1.4.1.8595.3653.9.5 | NodehtEmtaDevConfig | |||
| 1.3.6.1.4.1.8595.3653.9.5.1 | ScalarhtEmtaDevConfigCountryCode | read-write | current | Restricts the telepnony profile set based on country requirements. Set country specific telephone line parameters. |
| 1.3.6.1.4.1.8595.3653.9.5.2 | ScalarhtEmtaDevConfigCLIPDisplay | read-write | current | Control the display fileds of the CLIP messages. If the relative bit is 1, then the display of that field should be enabled. If the bit is 0, then it's disable… |
| 1.3.6.1.4.1.8595.3653.9.5.3 | ScalarhtEmtaDevConfigLetterInDigit | read-write | current | For packetcable, the Digit only include the number from 0 to 9. In order to allow the DCM module to recogbize the star or pound as part of the number, this nee… |
| 1.3.6.1.4.1.8595.3653.9.5.4 | ScalarhtEmtaDevDtmfToneRelayMode | read-write | current | This object contains the value which controls the mode for DTMF relay. For SIP, it supports 0~5 mode. For MGCP, it supports 0 and 1. off(0): in-band, DTMF digi… |
| 1.3.6.1.4.1.8595.3653.9.5.5 | ScalarhtEmtaDevSecurityOverRTP | read-write | current | Set the mode for security over RTP/RTCP. caenforces: No security unless CA set the security through MGCP message. mtaenforcesRTP: RTP with security always. mta… |
| 1.3.6.1.4.1.8595.3653.9.5.6 | ScalarhtEmtaDevConfigRTCPDSCP | read-write | current | The RTCP DSCP value. This OID apply for only MGCP version. |
| 1.3.6.1.4.1.8595.3653.9.6 | NodehtEmtaDevCodingProf | |||
| 1.3.6.1.4.1.8595.3653.9.6.1 | TablehtEmtaDevCodingProfTable | not-accessible | current | This table contains coding profile that are used |
| 1.3.6.1.4.1.8595.3653.9.6.1.1 | RowhtEmtaDevCodingProfEntry | not-accessible | current | Each entry defines a coding profile |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.1 | ColumnhtEmtaDevCodingProfOrder | not-accessible | current | Index of the coding profile |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.2 | ColumnhtEmtaDevCodingProfCodecTx | read-only | current | Define the codec used for voice transmission. |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.3 | ColumnhtEmtaDevCodingProfCodecRx | read-only | current | Define the codec used for voice receiving. |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.4 | ColumnhtEmtaDevCodingProfUsage | read-only | current | This OID would display what kind of usage this profile is used for, for example, voice or fax. |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.5 | ColumnhtEmtaDevPlayoutNomDelay | read-write | current | To tune the playout buffer on digital signal processors (DSPs) to accommodate packet jitter caused by switches in the WAN. Users can control the nominal delay … |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.6 | ColumnhtEmtaDevPlayoutMaxDelay | read-write | current | Control the maximum delay time (in msec) for the voice playout. |
| 1.3.6.1.4.1.8595.3653.9.6.1.1.7 | ColumnhtEmtaDevPlayoutMinDelay | read-write | current | Control the minimal delay time (in msec) for the voice playout. |
| 1.3.6.1.4.1.8595.3653.9.7 | NodehtEmtaDevNATone | |||
| 1.3.6.1.4.1.8595.3653.9.7.1 | TablehtEmtaSigDevNAToneTable | not-accessible | current | The Tone Table defines the various tone operations. Any definition of the tones callWaiting1-4 in this table should just contain the audible tone itself and NO… |
| 1.3.6.1.4.1.8595.3653.9.7.1.1 | RowhtEmtaSigDevNAToneEntry | not-accessible | current | The different tone types that can be provisioned based on country specific needs. Each entry contains the tone generation parameters for a specific Tone Type. … |
| 1.3.6.1.4.1.8595.3653.9.7.1.1.1 | ColumnhtEmtaSigDevNAToneType | not-accessible | current | Unique value that will correspond to the different tone types. These tones can be provisioned based on country specific needs. This object defines the type of … |
| 1.3.6.1.4.1.8595.3653.9.7.1.1.2 | ColumnhtEmtaSigDevNAToneWholeToneRepeatCount | read-write | current | This is the repeat count, which signifies how many times to repeat the entire on-off cadence sequence. Setting this object may result in a cadence duration lon… |
| 1.3.6.1.4.1.8595.3653.9.7.1.1.3 | ColumnhtEmtaSigDevNAToneSteady | read-write | current | This is the steady tone. Device must play out the on-off cadence sequence for pktcSigDevToneWholeRepeatCount times and then apply the last tone forever. Settin… |
| 1.3.6.1.4.1.8595.3653.9.7.2 | TablehtEmtaSigDevNAMultiFreqToneTable | not-accessible | current | This MIB table defines the characteristics of tones with multiple frequencies. The constraints imposed on the tones by the MIB table pktcSigDevToneTable need t… |
| 1.3.6.1.4.1.8595.3653.9.7.2.1 | RowhtEmtaSigDevNAMultiFreqToneEntry | not-accessible | current | The different tone types with multiple frequencies that can be provisioned based on country specific needs. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.1 | ColumnhtEmtaSigDevNAToneNumber | not-accessible | current | This MIB Object represents the frequency reference of a multi-frequency tone. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.2 | ColumnhtEmtaSigDevNAToneFirstFreqValue | read-write | current | This MIB Object represents the value of the first frequency of a tone type. A value of Zero implies absence of the referenced frequency. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.3 | ColumnhtEmtaSigDevNAToneSecondFreqValue | read-write | current | This MIB Object represents the value of the second frequency of a tone type. A value of Zero implies absence of the referenced frequency. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.4 | ColumnhtEmtaSigDevNAToneThirdFreqValue | read-write | current | This MIB Object represents the value of the third frequency of a tone type. A value of Zero implies absence of the referenced frequency. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.5 | ColumnhtEmtaSigDevNAToneFourthFreqValue | read-write | current | This MIB Object represents the value of the fourth frequency of a tone type. A value of Zero implies absence of the referenced frequency. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.6 | ColumnhtEmtaSigDevNAToneFreqMode | read-write | current | This MIB Object provides directive on the modulation or summation of the frequencies involved in the tone. It is to be noted that while summation can be done w… |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.7 | ColumnhtEmtaSigDevNAToneFreqAmpModePrtg | read-write | current | This MIB Object represents the percentage of amplitude modulation applied to the second frequency when the MIB Object 'pktcSigDevToneFreqMode' is set to a valu… |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.8 | ColumnhtEmtaSigDevNAToneDbLevel | read-write | current | This MIB Object contains the decibel level for each analog signal (tone) that is locally generated (versus in band supervisory tones) and sourced to the a-b te… |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.9 | ColumnhtEmtaSigDevNAToneFreqOnDuration | read-write | current | This MIB Object represents the duration for which the frequency reference corresponding to the tone type is turned on. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.10 | ColumnhtEmtaSigDevNAToneFreqOffDuration | read-write | current | This MIB Object represents the duration for which the frequency reference corresponding to the tone type is turned off. |
| 1.3.6.1.4.1.8595.3653.9.7.2.1.11 | ColumnhtEmtaSigDevNAToneFreqRepeatCount | read-write | current | This MIB Object indicates the number of times to repeat the cadence cycle represented by the on/off durations (refer to the MIB Objects pktcSigDevToneFreqOnDur… |
| 1.3.6.1.4.1.8595.3653.9.8 | NodehtEmtaDevConfigUser | |||
| 1.3.6.1.4.1.8595.3653.9.8.1 | TablehtEmtaDevConfigUserTable | not-accessible | current | This table contains User items that are configurable per endpoint |
| 1.3.6.1.4.1.8595.3653.9.8.1.1 | RowhtEmtaDevConfigUserEntry | not-accessible | current | Each entry contains User objects for the particular endpoint indexed by the corresponding ifIndex. |
| 1.3.6.1.4.1.8595.3653.9.8.1.1.1 | ColumnhtEmtaDevConfigUserVoiceTelRxLevel | read-write | current | Adjustments to the overall gain in the DSP channels,Allows adjustment of the digital gain from -14dB to +14dB in 1dB steps. RX digital gain(Direction is from p… |
| 1.3.6.1.4.1.8595.3653.9.8.1.1.2 | ColumnhtEmtaDevConfigUserVoiceTelTxLevel | read-write | current | Adjustments to the overall gain in the DSP channels,Allows adjustment of the digital gain from -14dB to +14dB in 1dB steps. TX digital gain(Direction is from t… |
| 1.3.6.1.4.1.8595.3653.9.8.100 | ScalarhtEmtaDevConfigUserApplySettins | read-write | current | If set to true(1), then all settings from this MIB will be applied to the hardware for on-the-fly reconfiguration. Always returns false(2) when read. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HtEmtaTenthdBm | Integer32 | current | This textual convention represents power levels that are normally expressed in dBm. Units are in tenths of a dBm; for example, -13.5 dBm will be represented as -135. |