HITRON-GW-MGMT-MIB
206 objects
This is the MIB root module for hitron Gateway management Cable Modem.
Imported Objects
| HITRON-RG-MIB | hitronMib |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString PhysAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595.4 | IdentitygwMgmt | to | This is the MIB root module for hitron Gateway management Cable Modem. | |
| 1.3.6.1.4.1.8595.4.1 | NodehitronGwMgmtBase | |||
| 1.3.6.1.4.1.8595.4.1.1 | ScalarhitronGwMgmtRouter | read-write | current | This object controls whether the unit is in Bridge mode , Router mode or router mode with MTA as WAN IP. By default this has the value 1 for Router mode. In th… |
| 1.3.6.1.4.1.8595.4.1.2 | ScalarhitronGwMgmtResetToDefault | read-write | current | Setting this object to true(1) causes the device to do a factory reset. Reading this object always returns false(2). |
| 1.3.6.1.4.1.8595.4.1.3 | ScalarhitronGwMgmtDhcpEnable | read-write | current | This object controls Whether the DHCP server of the unit is in Enabled or not. By default this has the value true for Enabled. When in Bridge mode (hitronGwMgm… |
| 1.3.6.1.4.1.8595.4.1.4 | ScalarhitronGwMgmtLanIp | read-write | current | This value contains the LAN IP address of the device when in Router mode. In Bridge mode the LAN IP Address is not used. |
| 1.3.6.1.4.1.8595.4.1.5 | ScalarhitronGwMgmtDhcpStartIp | read-write | current | This IP address has to be in the same network as the hitronGwMgmtLanIp and at least leave for one CPE in the same subnet. |
| 1.3.6.1.4.1.8595.4.1.6 | ScalarhitronGwMgmtDhcpNumCpe | read-write | current | This object controls the number of clients the DHCP server will handle. It can never be more then 253 if it's a C-class network, i.e. netmask 255.255.255.0. Th… |
| 1.3.6.1.4.1.8595.4.1.7 | NodehitronGwMgmtDnsServerCtrl | |||
| 1.3.6.1.4.1.8595.4.1.7.1 | NodehitronGwMgmtLanDnsServer | |||
| 1.3.6.1.4.1.8595.4.1.7.1.1 | TablehitronGwMgmtLanDnsServerTable | not-accessible | current | This table contains the information for the Lan DNS entries. |
| 1.3.6.1.4.1.8595.4.1.7.1.1.1 | RowhitronGwMgmtLanDnsServerEntry | not-accessible | current | The table that describes the Lan DNS PROFILE. |
| 1.3.6.1.4.1.8595.4.1.7.1.1.1.1 | ColumnhitronGwMgmtLanDnsServerOrder | not-accessible | current | Integer index into the Lan DNS table |
| 1.3.6.1.4.1.8595.4.1.7.1.1.1.2 | ColumnhitronGwMgmtLanDnsServerIpType | read-write | current | The type of InetAddress for hitronGwMgmtLanDnsServerIp. |
| 1.3.6.1.4.1.8595.4.1.7.1.1.1.3 | ColumnhitronGwMgmtLanDnsServerIp | read-write | current | The LAN DNS IP address. The LAN DNS IP should be manually assigned by the users. Setting of 0.0.0.0 would make the device assign the device's LAN IP as the DNS… |
| 1.3.6.1.4.1.8595.4.1.7.2 | NodehitronGwMgmtWanDnsServer | |||
| 1.3.6.1.4.1.8595.4.1.7.2.1 | TablehitronGwMgmtWanDnsServerTable | not-accessible | current | This table contains the information for the Wan DNS entries. |
| 1.3.6.1.4.1.8595.4.1.7.2.1.1 | RowhitronGwMgmtWanDnsServerEntry | not-accessible | current | The table that describes the Wan DNS PROFILE. |
| 1.3.6.1.4.1.8595.4.1.7.2.1.1.1 | ColumnhitronGwMgmtWanDnsServerOrder | not-accessible | current | Integer index into the Wan DNS table |
| 1.3.6.1.4.1.8595.4.1.7.2.1.1.2 | ColumnhitronGwMgmtWanDnsServerIpType | read-write | current | The type of InetAddress for hitronGwMgmtWanDnsServerIp. |
| 1.3.6.1.4.1.8595.4.1.7.2.1.1.3 | ColumnhitronGwMgmtWanDnsServerIp | read-write | current | The WAN DNS IP address. The WAN DNS IP could be manually assigned by the users or automatically get from the DHCP messages of the WAN IP address. Setting of 0.… |
| 1.3.6.1.4.1.8595.4.1.8 | ScalarhitronGwMgmtDhcpLeaseTime | read-write | current | This object controls the DHCP lease time. Its default value is one week, which is set this way to support easy moving of laptops between this home network and … |
| 1.3.6.1.4.1.8595.4.1.9 | NodehitronGwMgmtRIPCtrl | |||
| 1.3.6.1.4.1.8595.4.1.9.1 | ScalarhitronGwMgmtRIPCtrlGwMode | read-write | current | This object controls the GW information used in the RIP message. For cable modem, there are two choices for the operators to choose ether use the RF IP as the … |
| 1.3.6.1.4.1.8595.4.1.9.2 | ScalarhitronGwMgmtRIPCtrlSend | read-write | current | If true, RIP2 message would be sent from cable interface to CMTS. |
| 1.3.6.1.4.1.8595.4.1.9.3 | ScalarhitronGwMgmtRIPCtrlReceive | read-write | current | If true, RIP2 message would be received from LAN interface. |
| 1.3.6.1.4.1.8595.4.1.9.4 | ScalarhitronGwMgmtRIPCtrlInterval | read-write | current | RIP2 message update interval, insecond. |
| 1.3.6.1.4.1.8595.4.1.9.5 | ScalarhitronGwMgmtRIPCtrlMetric | read-write | current | Metric value in RIP2 messages. |
| 1.3.6.1.4.1.8595.4.1.9.6 | ScalarhitronGwMgmtRIPCtrlAuthType | read-write | current | Authentication type of RIP2 messages. |
| 1.3.6.1.4.1.8595.4.1.9.7 | ScalarhitronGwMgmtRIPCtrlAuthID | read-write | current | Authentication ID of RIP2 messages. It should match the ID of the setting in CMTS. |
| 1.3.6.1.4.1.8595.4.1.9.8 | ScalarhitronGwMgmtRIPCtrlAuthKey | read-write | current | Authentication key of RIP2 messages. |
| 1.3.6.1.4.1.8595.4.1.9.9 | ScalarhitronGwMgmtRIPCtrlNeighbor | read-write | current | The target neighbor for the RIP messages. |
| 1.3.6.1.4.1.8595.4.1.10 | NodehitronGwMgmtWANCtrl | |||
| 1.3.6.1.4.1.8595.4.1.10.1 | ScalarhitronGwMgmtWANCtrlMode | read-write | current | For the dhcp mode, the WAN IP for NAT is assigned by DHCP from CMTS's CPE domain. No public LAN interface is created for this mode. For the static_and_routed m… |
| 1.3.6.1.4.1.8595.4.1.10.2 | ScalarhitronGwMgmtPubLanIP | read-write | current | If hitronGwMgmtWANCtrlMode is 2 or 3, this OID must be configured. It's assigned to the public LAN interface of this device. When the hitronGwMgmtWANCtrlMode i… |
| 1.3.6.1.4.1.8595.4.1.10.3 | ScalarhitronGwMgmtPubLanNetmask | read-write | current | If hitronGwMgmtWANCtrlMode is 2 or 3, this OID must be configured. It's used with the hitronGwMgmtPubLanIP to set up the public LAN subnet for this device. The… |
| 1.3.6.1.4.1.8595.4.1.10.4 | ScalarhitronGwMgmtStaticWANIP | read-write | current | If hitronGwMgmtWANCtrlMode is 4, this OID must be configured. If hitronGwMgmtWANCtrlMode is not 4, then value in this OID would never be used. It's assigned to… |
| 1.3.6.1.4.1.8595.4.1.10.5 | ScalarhitronGwMgmtStaticWANNetmask | read-write | current | If hitronGwMgmtWANCtrlMode is 4, this OID must be configured. It's used with the hitronGwMgmtStaticWANIP to set up the static WAN subnet for this device. |
| 1.3.6.1.4.1.8595.4.1.10.6 | ScalarhitronGwMgmtStaticWANGWIP | read-write | current | If hitronGwMgmtWANCtrlMode is 4, this OID must be configured. It's assigned to the WAN interface of this device. |
| 1.3.6.1.4.1.8595.4.1.11 | ScalarhitronGwMgmtIDSCtrlMode | read-write | current | This item is used to control the enable/disable of IDS(Intrusion Detection System) |
| 1.3.6.1.4.1.8595.4.1.12 | ScalarhitronGwMgmtPingOnWan | read-write | current | This object controls the enable/disable of ping reply when the WAN IP is pinged. |
| 1.3.6.1.4.1.8595.4.1.13 | ScalarhitronGwMgmtFirewallPublic | read-write | current | This object controls the enable/disable of firewall protection for the public LAN if existing. |
| 1.3.6.1.4.1.8595.4.1.14 | NodehitronGwMgmtAccessSetup | |||
| 1.3.6.1.4.1.8595.4.1.14.1 | ScalarhitronGwMgmtAccessMode | read-write | current | Controls what stations will be given access to the device. If set to allowAny(1), then any station will be allowed to connect. If set to allowList(2), then onl… |
| 1.3.6.1.4.1.8595.4.1.14.2 | ScalarhitronGwMgmtAccessOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.4.1.14.3 | TablehitronGwMgmtAccessListTable | not-accessible | current | A table of MAC addresses which defines the MAC address based access restrictions for the system. |
| 1.3.6.1.4.1.8595.4.1.14.3.1 | RowhitronGwMgmtAccessListEntry | not-accessible | current | A row in the table which specifies a single MAC address. |
| 1.3.6.1.4.1.8595.4.1.14.3.1.1 | ColumnhitronGwMgmtAccessListIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.8595.4.1.14.3.1.2 | ColumnhitronGwMgmtAccessListStation | read-write | current | A MAC address of a station which will be allowed to connect to the service set if hitronGwMgmtAccessMode is set to allowList(2), or forbidden if hitronGwMgmtAc… |
| 1.3.6.1.4.1.8595.4.1.15 | NodehitronGwMgmtParentalCtrl | |||
| 1.3.6.1.4.1.8595.4.1.15.1 | ScalarhitronGwMgmtParentalCtrlEnable | read-write | current | true(1): Parental Control enabled false(2): Parental Control disabled |
| 1.3.6.1.4.1.8595.4.1.15.2 | ScalarhitronGwMgmtParentalCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.4.1.15.3 | NodehitronGwMgmtParentalCtrlBlocked | |||
| 1.3.6.1.4.1.8595.4.1.15.3.1 | TablehitronGwMgmtParentalCtrlBlockedTable | not-accessible | current | A table which defined the Key words or URL for parental control. |
| 1.3.6.1.4.1.8595.4.1.15.3.1.1 | RowhitronGwMgmtParentalCtrlBlockedEntry | not-accessible | current | A row in the table defines the key word or URL for the parental control. |
| 1.3.6.1.4.1.8595.4.1.15.3.1.1.1 | ColumnhitronGwMgmtParentalCtrlBlockedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set. |
| 1.3.6.1.4.1.8595.4.1.15.3.1.1.2 | ColumnhitronGwMgmtParentalCtrlBlockedVal | read-write | current | The key words or URL used to screen and block the content. If it is set to zero string ,it means delete this key word from the List. |
| 1.3.6.1.4.1.8595.4.1.15.4 | NodehitronGwMgmtParentalCtrlTrusted | |||
| 1.3.6.1.4.1.8595.4.1.15.4.1 | TablehitronGwMgmtParentalCtrlTrustedTable | not-accessible | current | A table which defined the trusted MAC addresses for parental control. |
| 1.3.6.1.4.1.8595.4.1.15.4.1.1 | RowhitronGwMgmtParentalCtrlTrustedEntry | not-accessible | current | A row in the table defines the trusted MAC addresses for the parental control. |
| 1.3.6.1.4.1.8595.4.1.15.4.1.1.1 | ColumnhitronGwMgmtParentalCtrlTrustedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set. |
| 1.3.6.1.4.1.8595.4.1.15.4.1.1.2 | ColumnhitronGwMgmtParentalCtrlTrustedVal | read-write | current | The MAC address which is trusted and without parental control. If it is set to 0x000000000000 from an effective MAC address,it means delete this MAC address fr… |
| 1.3.6.1.4.1.8595.4.1.15.5 | NodehitronGwMgmtParentalCtrlSchedule | |||
| 1.3.6.1.4.1.8595.4.1.15.5.1 | ScalarhitronGwMgmtParentalCtrlWeek | read-write | current | Each bit of the byte represent each day of the week. From bit 0 to 6 ,they represent Monday to Sunday. |
| 1.3.6.1.4.1.8595.4.1.15.5.2 | ScalarhitronGwMgmtParentalCtrlHourStart | read-write | current | Start hour of the parental control |
| 1.3.6.1.4.1.8595.4.1.15.5.3 | ScalarhitronGwMgmtParentalCtrlHourEnd | read-write | current | End hour of the parental control |
| 1.3.6.1.4.1.8595.4.1.15.5.4 | ScalarhitronGwMgmtParentalCtrlMinStart | read-write | current | Start minute of the parental control |
| 1.3.6.1.4.1.8595.4.1.15.5.5 | ScalarhitronGwMgmtParentalCtrlMinEnd | read-write | current | End minute of the parental control |
| 1.3.6.1.4.1.8595.4.1.16 | NodehitronGwMgmtIPFilterCtrl | |||
| 1.3.6.1.4.1.8595.4.1.16.1 | ScalarhitronGwMgmtIPFilterCtrlEnable | read-write | current | true(1): IP filter enabled false(2): IP filter disabled |
| 1.3.6.1.4.1.8595.4.1.16.2 | ScalarhitronGwMgmtIPFilterCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.4.1.16.3 | NodehitronGwMgmtIPFilterCtrlSetup | |||
| 1.3.6.1.4.1.8595.4.1.16.3.1 | TablehitronGwMgmtIPFilterCtrlSetupTable | not-accessible | current | A table which defined the setup for IP filter control. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1 | RowhitronGwMgmtIPFilterCtrlSetupEntry | not-accessible | current | A row in the table defines the setup for the IP filter. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.1 | ColumnhitronGwMgmtIPFilterCtrlSetupIndex | not-accessible | current | Identifies an instance of a key among those used by the service set. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.2 | ColumnhitronGwMgmtIPFilterCtrlSetupName | read-write | current | The mnemonic name for the IP filter. Each rule should have different name.If it set to an empty string from an effective name,It means delete this filter from … |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.3 | ColumnhitronGwMgmtIPFilterCtrlAddressType | read-write | current | The type of internet address used for IP filter. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.4 | ColumnhitronGwMgmtIPFilterCtrlIPStart | read-write | current | Start IP of the filter. This IP value must be located in the same subnet of the ether port. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.5 | ColumnhitronGwMgmtIPFilterCtrlIPEnd | read-write | current | End IP of the filter. This IP value must be located in the same subnet of the ether port. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.6 | ColumnhitronGwMgmtIPFilterCtrlPortStart | read-write | current | Start Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.7 | ColumnhitronGwMgmtIPFilterCtrlPortEnd | read-write | current | Start Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.8 | ColumnhitronGwMgmtIPFilterCtrlProtocol | read-write | current | selected protocol for IP filter |
| 1.3.6.1.4.1.8595.4.1.16.3.1.1.9 | ColumnhitronGwMgmtIPFilterCtrlActive | read-write | current | true(1): This IP filter rule is activated false(2): This IP filter rule is de-activated. |
| 1.3.6.1.4.1.8595.4.1.17 | NodehitronGwMgmtForwardingCtrl | |||
| 1.3.6.1.4.1.8595.4.1.17.1 | ScalarhitronGwMgmtForwardingCtrlEnable | read-write | current | true(1): IP forwarding enabled false(2): IP forwarding disabled |
| 1.3.6.1.4.1.8595.4.1.17.2 | ScalarhitronGwMgmtForwardingCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.4.1.17.3 | NodehitronGwMgmtForwardingCtrlSetup | |||
| 1.3.6.1.4.1.8595.4.1.17.3.1 | TablehitronGwMgmtForwardingCtrlSetupTable | not-accessible | current | A table which defined the setup for IP forwarding rules. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1 | RowhitronGwMgmtForwardingCtrlSetupEntry | not-accessible | current | A row in the table defines the setup for the IP forwarding rule. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.1 | ColumnhitronGwMgmtForwardingCtrlSetupIndex | not-accessible | current | Identifies an instance of a forwarding rules. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.2 | ColumnhitronGwMgmtForwardingCtrlSetupName | read-write | current | The mnemonic name for the IP forwarding rules. Each rule should have different name.If it set to an empty string from an effective name,It means delete this ru… |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.3 | ColumnhitronGwMgmtForwardingCtrlAddressType | read-write | current | The type of internet address used for IP forwarding rules. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.4 | ColumnhitronGwMgmtForwardingCtrlIPAddress | read-write | current | IP address of the forwarding target host. This IP value must be located in the same subnet of the ether private LAN. If it's not, the whole list should be igno… |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.5 | ColumnhitronGwMgmtForwardingCtrlPubPortStart | read-write | current | Public Start Port of the forwarding rule. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.6 | ColumnhitronGwMgmtForwardingCtrlPubPortEnd | read-write | current | Public end Port of the forwarding rule. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.7 | ColumnhitronGwMgmtForwardingCtrlPrivatePortStart | read-write | current | The target start port to be forwarded of the forwarding rule. |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.8 | ColumnhitronGwMgmtForwardingCtrlProtocol | read-write | current | selected protocol for IP forwarding rule |
| 1.3.6.1.4.1.8595.4.1.17.3.1.1.9 | ColumnhitronGwMgmtForwardingCtrlActive | read-write | current | true(1): This IP forwarding rule is activated false(2): This IP forwarding rule is de-activated. |
| 1.3.6.1.4.1.8595.4.1.18 | NodehitronGwMgmtPortTriggerCtrl | |||
| 1.3.6.1.4.1.8595.4.1.18.1 | ScalarhitronGwMgmtPortTriggerCtrlEnable | read-write | current | true(1): IP PortTrigger enabled false(2): IP PortTrigger disabled |
| 1.3.6.1.4.1.8595.4.1.18.2 | ScalarhitronGwMgmtPortTriggerCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.4.1.18.3 | NodehitronGwMgmtPortTriggerCtrlSetup | |||
| 1.3.6.1.4.1.8595.4.1.18.3.1 | TablehitronGwMgmtPortTriggerCtrlSetupTable | not-accessible | current | A table which defined the setup for IP PortTrigger rules. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1 | RowhitronGwMgmtPortTriggerCtrlSetupEntry | not-accessible | current | A row in the table defines the setup for the IP PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.1 | ColumnhitronGwMgmtPortTriggerCtrlSetupIndex | not-accessible | current | Identifies an instance of a PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.2 | ColumnhitronGwMgmtPortTriggerCtrlSetupName | read-write | current | The mnemonic name for the IP PortTrigger rules. Each rule should have different name.If it set to an empty string from an effective name,It means delete this r… |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.3 | ColumnhitronGwMgmtPortTriggerCtrlPortStart | read-write | current | Trigger Start Port of the PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.4 | ColumnhitronGwMgmtPortTriggerCtrlPortEnd | read-write | current | Trigger end Port of the PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.5 | ColumnhitronGwMgmtPortTriggerCtrlTargetPortStart | read-write | current | The target start port of the PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.6 | ColumnhitronGwMgmtPortTriggerCtrlTargetPortEnd | read-write | current | The target end port of the PortTrigger rule. |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.7 | ColumnhitronGwMgmtPortTriggerCtrlProtocol | read-write | current | selected protocol for PortTrigger rule |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.8 | ColumnhitronGwMgmtPortTriggerCtrlTimeout | read-write | current | Timeout value in msec for PortTrigger rule. The trigger would create a incoming port forwarding rule for the target port which is trigger by the port in the tr… |
| 1.3.6.1.4.1.8595.4.1.18.3.1.1.9 | ColumnhitronGwMgmtPortTriggerCtrlActive | read-write | current | true(1): This IP PortTrigger rule is activated false(2): This IP PortTrigger rule is de-activated. |
| 1.3.6.1.4.1.8595.4.1.19 | NodehitronGwMgmtDMZSetup | |||
| 1.3.6.1.4.1.8595.4.1.19.1 | ScalarhitronGwMgmtDMZSetupMode | read-write | current | Disable/Enable the DMZ host. If the hitronGwMgmtDMZSetupIPAddress is zero, it's disabled. |
| 1.3.6.1.4.1.8595.4.1.19.2 | ScalarhitronGwMgmtDMZSetupIPAddress | read-write | current | The DMZ host IP. If it's set to zero, the hitronGwMgmtDMZSetupMode must be false. |
| 1.3.6.1.4.1.8595.4.1.20 | NodehitronGwMgmtBridgingSetup | |||
| 1.3.6.1.4.1.8595.4.1.20.1 | ScalarhitronGwMgmtBridgingPort | read-write | current | Each bit of the byte represent each port of the switch. From bit 0 to 3 ,if the correponding bit is enabled(1), all hosts connected with the enabled port(s) wo… |
| 1.3.6.1.4.1.8595.4.1.20.2 | TablehitronGwMgmtBridgedMacAddrTable | not-accessible | current | A list of bridged MAC address entries |
| 1.3.6.1.4.1.8595.4.1.20.2.1 | RowhitronGwMgmtBridgedMacAddrEntry | not-accessible | current | parameters for bridged MAC. |
| 1.3.6.1.4.1.8595.4.1.20.2.1.1 | ColumnhitronGwMgmtBridgedMacAddrIndex | not-accessible | current | The MAC address which would be bridged under RG mode. |
| 1.3.6.1.4.1.8595.4.1.20.2.1.2 | ColumnhitronGwMgmtBridgedMacAddr | read-write | current | The MAC address which would be bridged under RG mode.If this value is set to 00:00:00:00:00:00, that means delete this entry. |
| 1.3.6.1.4.1.8595.4.1.21 | NodehitronGwMgmtVPNClientCtrl | |||
| 1.3.6.1.4.1.8595.4.1.21.1 | ScalarhitronGwMgmtVPNClientEnable | read-write | current | Enable/disable the VPN Client. |
| 1.3.6.1.4.1.8595.4.1.21.2 | ScalarhitronGwMgmtVPNClientSelect | read-write | current | Select the VPN Client. |
| 1.3.6.1.4.1.8595.4.1.21.3 | ScalarhitronGwMgmtVPNServerIpType | read-write | current | The type of InetAddress for hitronGwMgmtVPNServerIp. |
| 1.3.6.1.4.1.8595.4.1.21.4 | ScalarhitronGwMgmtVPNServerIp | read-write | current | The VPN Server IP address. |
| 1.3.6.1.4.1.8595.4.1.21.5 | ScalarhitronGwMgmtVPNClientListenPort | read-write | current | Setting the VPN Client's listen port. |
| 1.3.6.1.4.1.8595.4.1.21.6 | ScalarhitronGwMgmtVPNClientUserName | read-write | current | Setting the VPN Client's username. |
| 1.3.6.1.4.1.8595.4.1.21.7 | ScalarhitronGwMgmtVPNClientPassword | read-write | current | Setting the VPN Client's password. |
| 1.3.6.1.4.1.8595.4.1.21.8 | ScalarhitronGwMgmtVPNClientPapRequire | read-write | current | Enable/disable the VPN Client's pap require. |
| 1.3.6.1.4.1.8595.4.1.21.9 | ScalarhitronGwMgmtVPNClientPapRefuse | read-write | current | Enable/disable the VPN Client's pap refuse. |
| 1.3.6.1.4.1.8595.4.1.21.10 | ScalarhitronGwMgmtVPNClientChapRequire | read-write | current | Enable/disable the VPN Client's chap require. |
| 1.3.6.1.4.1.8595.4.1.21.11 | ScalarhitronGwMgmtVPNClientChapRefuse | read-write | current | Enable/disable the VPN Client's chap refuse. |
| 1.3.6.1.4.1.8595.4.1.21.12 | ScalarhitronGwMgmtVPNClientRequireAuth | read-write | current | Enable/disable the VPN Client's require auth. |
| 1.3.6.1.4.1.8595.4.1.21.13 | ScalarhitronGwMgmtVPNClientRedialRequest | read-write | current | Enable/disable the VPN Client's redial request. |
| 1.3.6.1.4.1.8595.4.1.21.14 | ScalarhitronGwMgmtVPNClientPppDebug | read-write | current | Enable/disable the VPN Client's ppp debug. |
| 1.3.6.1.4.1.8595.4.1.21.15 | ScalarhitronGwMgmtVPNClientRequireMppe | read-write | current | Setting the VPN Client's ppp require mppe. |
| 1.3.6.1.4.1.8595.4.1.21.16 | ScalarhitronGwMgmtVPNClientRedialTimeout | read-write | current | Setting the VPN Client's redial timeout in seconds. |
| 1.3.6.1.4.1.8595.4.1.21.17 | ScalarhitronGwMgmtVPNClientMaxRedials | read-write | current | Setting the VPN Client's max redial times. |
| 1.3.6.1.4.1.8595.4.1.21.18 | ScalarhitronGwMgmtVPNClientDisplayEnable | read-write | current | When this OID is set to false, the VPN Client web page are NOT displayed. |
| 1.3.6.1.4.1.8595.4.1.22 | ScalarhitronGwMgmtLanIpNetmask | read-write | current | This value contains the netmask for the LAN IP address of the device when in Router mode. In Bridge mode, the LAN IP netmask is not used. The default Network m… |
| 1.3.6.1.4.1.8595.4.1.23 | TablehitronRemoteMgmtACLTable | not-accessible | current | This table defines the access control list from remote to the WAN interface. |
| 1.3.6.1.4.1.8595.4.1.23.1 | RowhitronRemoteMgmtACLEntry | not-accessible | current | Each entry defines a access control ip or range for remote management access. |
| 1.3.6.1.4.1.8595.4.1.23.1.1 | ColumnhitronRemoteMgmtACLIndex | not-accessible | current | The index of the Access Control List entry |
| 1.3.6.1.4.1.8595.4.1.23.1.2 | ColumnhitronRemoteMgmtACLStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.8595.4.1.23.1.3 | ColumnhitronRemoteMgmtACLStartIp | read-write | current | This mib object indicates the start IP address of remote management access range. |
| 1.3.6.1.4.1.8595.4.1.23.1.4 | ColumnhitronRemoteMgmtACLEndIp | read-write | current | This mib object indicates the end IP address of remote management access range. |
| 1.3.6.1.4.1.8595.4.1.23.1.5 | ColumnhitronRemoteMgmtACLProtocol | read-write | current | This mib object is used to defined the protocol which will be allowed for accessing. Each bit of the byte represent a protocol. From bit 0 to 4, they represent… |
| 1.3.6.1.4.1.8595.4.1.24 | NodehitronRemoteMgmtProtocolCtrl | |||
| 1.3.6.1.4.1.8595.4.1.24.1 | ScalarhitronRemoteMgmtHttpPort | read-write | current | port for http remote management from RF side |
| 1.3.6.1.4.1.8595.4.1.24.2 | ScalarhitronRemoteMgmtHttpsPort | read-write | current | port for https remote management from RF side |
| 1.3.6.1.4.1.8595.4.1.24.3 | ScalarhitronRemoteMgmtTelnetPort | read-write | current | port for telnet remote management from RF side |
| 1.3.6.1.4.1.8595.4.1.24.4 | ScalarhitronRemoteMgmtSshPort | read-write | current | port for ssh remote management from RF side |
| 1.3.6.1.4.1.8595.4.1.25 | ScalarhitronGwMgmtIpProvisioning | read-write | current | This object controls whether the embedded router operates in IPv4-only, IPv6-only or dual stack mode. In IP-v6-only mode, it is possible to enable DS-Lite for … |
| 1.3.6.1.4.1.8595.4.1.26 | ScalarhitronGwMgmtDsLiteEnable | read-write | current | This object controls whether enable Ds-lite function. This OID is used in DOCSIS config file to decide if the DS-lite is enable or not. This value would not be… |
| 1.3.6.1.4.1.8595.4.1.27 | ScalarhitronGwMgmtAFTRProvisioning | read-write | current | This object manage the address of AFTR and have a higher priority than dhcpv6 option 54(OPTION_AFTR_NAME). If a legal AFTR address (FQDN) is provided, embedded… |
| 1.3.6.1.4.1.8595.4.1.28 | ScalarhitronGwMgmtUSBEnable | read-write | current | This object controls Whether the USB servives of the unit is enabled or not. By default this has the value true for Enabled. |
| 1.3.6.1.4.1.8595.4.1.29 | NodehitronGwMgmtProvisioningCtrl | |||
| 1.3.6.1.4.1.8595.4.1.29.1 | ScalarhitronGwMgmtProvIp | read-write | current | This object controls whether the embedded router operates in IPv4-only, IPv6-only or dual stack mode. In IP-v6-only mode, it is possible to enable DS-Lite for … |
| 1.3.6.1.4.1.8595.4.1.29.2 | ScalarhitronGwMgmtProvDsLiteEnable | read-write | current | This object controls whether enable Ds-lite function. This OID is used in DOCSIS config file to decide if the DS-lite is enable or not. This value would not be… |
| 1.3.6.1.4.1.8595.4.1.29.3 | ScalarhitronGwMgmtProvAFTR | read-write | current | This object manage the address of AFTR and have a higher priority than dhcpv6 option 64(OPTION_AFTR_NAME). If a legal AFTR address (FQDN) is provided, embedded… |
| 1.3.6.1.4.1.8595.4.1.29.4 | ScalarhitronGwMgmtProv6rdEnable | read-only | current | This objects displays whether 6RD is enabled. It can only be enabled when hitronGwMgmtProvIp is in IPv4-only and option 212 is properly provisioned. |
| 1.3.6.1.4.1.8595.4.1.29.5 | ScalarhitronGwMgmtTcpMssClampSize | read-write | current | This objects controls the tcp mss clamping size for tunneling mode, like DS-lite or 6 RD. If the value is set to 0, tcp mss clamping feature is disabled. |
| 1.3.6.1.4.1.8595.4.1.29.6 | ScalarhitronGwMgmtRfc6333Fragment | read-write | current | This objects controls the fragmentation method for DS-lite tunneling. If the value is set to true, the oevr-length packet would do data fragmentation following… |
| 1.3.6.1.4.1.8595.4.1.30 | NodehitronGwMgmtDdnsCtrl | |||
| 1.3.6.1.4.1.8595.4.1.30.1 | ScalarhitronGwMgmtDdnsEnable | read-write | current | Enable Dynamic DNS |
| 1.3.6.1.4.1.8595.4.1.30.2 | ScalarhitronGwMgmtDdnsServerProvider | read-write | current | DDNS service provider |
| 1.3.6.1.4.1.8595.4.1.30.3 | ScalarhitronGwMgmtDdnsUsername | read-write | current | User Name for Dynamic DNS |
| 1.3.6.1.4.1.8595.4.1.30.4 | ScalarhitronGwMgmtDdnsPassword | read-write | current | Password for Dynamic DNS |
| 1.3.6.1.4.1.8595.4.1.30.5 | ScalarhitronGwMgmtDdnsHostname | read-write | current | Host Name for Dynamic DNS |
| 1.3.6.1.4.1.8595.4.1.30.6 | ScalarhitronGwMgmtDdnsGuiDisplay | read-write | current | Control wether show the DDNS client setting page for customer. If its value is true, then the DDNS client setting page would be displayed; otherwise, it will b… |
| 1.3.6.1.4.1.8595.4.1.31 | ScalarhitronGwMgmtUpnpEnable | read-write | current | This OID controls whether UPNP is enabled. |
| 1.3.6.1.4.1.8595.4.1.32 | ScalarhitronGwMgmtIgmpEnable | read-write | current | This OID controls whether IGMP is enabled. |
| 1.3.6.1.4.1.8595.4.1.33 | ScalarhitronGwMgmtMldEnable | read-write | current | This OID controls whether MLD is enabled. |
| 1.3.6.1.4.1.8595.4.1.34 | NodehitronGwMgmtTR069Ctrl | |||
| 1.3.6.1.4.1.8595.4.1.34.1 | ScalarhitronGwMgmtTR069Enable | read-write | current | Enable TR069 |
| 1.3.6.1.4.1.8595.4.1.34.2 | ScalarhitronGwMgmtTR069AcsUrl | read-write | current | Setting this object to config the TR069 ACS url. |
| 1.3.6.1.4.1.8595.4.1.35 | NodehitronGwMgmtMulticastCtrl | |||
| 1.3.6.1.4.1.8595.4.1.35.1 | ScalarhitronGwMgmtIgmpenable | read-write | current | This OID controls whether IGMP is enabled. |
| 1.3.6.1.4.1.8595.4.1.35.2 | ScalarhitronGwMgmtMldenable | read-write | current | This OID controls whether MLD is enabled. |
| 1.3.6.1.4.1.8595.4.1.35.3 | ScalarhitronGwMgmtIgmpVersion | read-write | current | This OID controls the igmp proxy's running version. |
| 1.3.6.1.4.1.8595.4.1.35.4 | ScalarhitronGwMgmtMldVersion | read-write | current | This OID controls the mld proxy's running version. |
| 1.3.6.1.4.1.8595.4.1.35.5 | ScalarhitronGwMgmtIgmpPeriodicGsq | read-write | current | This OID controls whether igmpproxy periodically sends group specific query or not |
| 1.3.6.1.4.1.8595.4.1.35.6 | ScalarhitronGwMgmtMldPeriodicGsq | read-write | current | This OID controls whether mld proxy periodically sends group specific query or not |
| 1.3.6.1.4.1.8595.4.1.37 | TablehitronRfRemoteMgmtACLTable | not-accessible | current | This table defines the access control list from remote to the RF interface. |
| 1.3.6.1.4.1.8595.4.1.37.1 | RowhitronRfRemoteMgmtACLEntry | not-accessible | current | Each entry defines a access control ip or range for RF remote management access. |
| 1.3.6.1.4.1.8595.4.1.37.1.1 | ColumnhitronRfRemoteMgmtACLIndex | not-accessible | current | The index of the RF Access Control List entry |
| 1.3.6.1.4.1.8595.4.1.37.1.2 | ColumnhitronRfRemoteMgmtACLStatus | read-create | current | The status of each RF access control rule, enable. enable(1): Enalbe this RF access control rule. disable(2): Disable this RF access control rule. remove(3): D… |
| 1.3.6.1.4.1.8595.4.1.37.1.3 | ColumnhitronRfRemoteMgmtACLStartIp | read-write | current | This mib object indicates the start IP address of RF remote management access range. |
| 1.3.6.1.4.1.8595.4.1.37.1.4 | ColumnhitronRfRemoteMgmtACLEndIp | read-write | current | This mib object indicates the end IP address of RF remote management access range. |
| 1.3.6.1.4.1.8595.4.1.38 | TablehitronLanLocalMgmtACLTable | not-accessible | current | This table defines the access control list from local to the LAN interface. |
| 1.3.6.1.4.1.8595.4.1.38.1 | RowhitronLanLocalMgmtACLEntry | not-accessible | current | Each entry defines a access control ip or range for LAN local management access. |
| 1.3.6.1.4.1.8595.4.1.38.1.1 | ColumnhitronLanLocalMgmtACLIndex | not-accessible | current | The index of the local Access Control List entry |
| 1.3.6.1.4.1.8595.4.1.38.1.2 | ColumnhitronLanLocalMgmtACLStatus | read-create | current | The status of each local access control rule, enable. enable(1): Enalbe this local access control rule. disable(2): Disable this local access control rule. rem… |
| 1.3.6.1.4.1.8595.4.1.38.1.3 | ColumnhitronLanLocalMgmtACLStartIp | read-write | current | This mib object indicates the start IP address of local management access range. |
| 1.3.6.1.4.1.8595.4.1.38.1.4 | ColumnhitronLanLocalMgmtACLEndIp | read-write | current | This mib object indicates the end IP address of local management access range. |
| 1.3.6.1.4.1.8595.4.1.99 | ScalarhitronGwMgmtCommit | read-write | current | Setting this object to true will activate any changes done to hitronGwMgmt OID above. As these are functionally different from the settings below, they have th… |
| 1.3.6.1.4.1.8595.4.1.100 | TablehitronIpLanAddrTable | not-accessible | current | Table of CPE devices on the LAN |
| 1.3.6.1.4.1.8595.4.1.100.1 | RowhitronIpLanAddrBaseEntry | not-accessible | current | Entry value containing the information of the CPE device on the LAN |
| 1.3.6.1.4.1.8595.4.1.100.1.1 | ColumnhitronIpLanAddrIpType | read-only | current | The type of IP address assigned to the LAN IP Device in the LAN-Trans Realm. |
| 1.3.6.1.4.1.8595.4.1.100.1.2 | ColumnhitronIpLanAddrIp | read-only | current | The address assigned to the LAN IP Device. |
| 1.3.6.1.4.1.8595.4.1.100.1.3 | ColumnhitronIpLanAddrClientID | read-only | current | The client's (i.e., LAN IP Device's) hardware address as indicated in the chaddr field of its DHCP REQUEST message. There is a one-to-one relationship between … |
| 1.3.6.1.4.1.8595.4.1.100.1.4 | ColumnhitronIpLanAddrLeaseCreateTime | read-only | current | This is the date and time when the LAN IP lease was created. |
| 1.3.6.1.4.1.8595.4.1.100.1.5 | ColumnhitronIpLanAddrLeaseExpireTime | read-only | current | This is the date and time when the LAN IP address lease will expire. |
| 1.3.6.1.4.1.8595.4.1.100.1.6 | ColumnhitronIpLanAddrHostName | read-only | current | This is the Host Name of the LAN IP address, based on DCHP option 12. |