HLS-MIB
167 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.26 | Nodehls | |||
| 1.3.6.1.4.1.26.2 | NodehlsBridges | |||
| 1.3.6.1.4.1.26.2.1 | NodeethernetBridge | |||
| 1.3.6.1.4.1.26.2.1.1 | ScalarramAddrTab8000Tab | not-accessible | mandatory | The RAM-resident Address Table in an HLS non-Token-Bus Bridge. |
| 1.3.6.1.4.1.26.2.1.1.1 | ScalarramAddrTab8000Entry | read-write | mandatory | An instance of this object-type exists for each entry in the RAM-resident Address Table in a HLS non-Token-Bus Bridge. The format of the OCTET STRING is: 1st o… |
| 1.3.6.1.4.1.26.2.1.1.2 | ScalarramAddrTab8000Address | not-accessible | mandatory | The MAC address associated with this entry |
| 1.3.6.1.4.1.26.2.1.2 | ScalarramAddrTab8000Filter | read-write | mandatory | Setting this value causes the re-creation of the filtered subset (see the object ramAddrTab8000FilterEntry) of the RAM-resident Address Table in a HLS 80xx Bri… |
| 1.3.6.1.4.1.26.2.1.3 | ScalarramAddrTab8000FilterNum | read-only | mandatory | The current number of entries in the filtered subset of entries in the RAM-resident Address Table in a HLS 80xx Bridge. The filtered subset consists of allentr… |
| 1.3.6.1.4.1.26.2.1.4 | ScalarramAddrTab8000FilterTab | not-accessible | mandatory | This table contains the filtered subset of the RAM-resident Address Table in a HLS 80xx Bridge. The filtered subset consists of all entries which matched the f… |
| 1.3.6.1.4.1.26.2.1.4.1 | ScalarramAddrTab8000FilterEntry | read-only | mandatory | An instance of this object-type exists for each entry in the filtered subset of entries in the RAM-resident Address Table in a HLS 80xx Bridge. The filtered su… |
| 1.3.6.1.4.1.26.2.1.4.2 | ScalarramAddrTab8000FilterIndex | not-accessible | mandatory | For the i-th entry, this object takes the value i. |
| 1.3.6.1.4.1.26.2.1.5 | ScalarramAddrTab8000Delete | write-only | mandatory | Setting this object to a value causes the immediate deletion of a subset of the entries in the RAM-resident Address Table in a HLS 80xx Bridge. The subset of e… |
| 1.3.6.1.4.1.26.2.1.6 | ScalarnvramAddrTab8000Tab | not-accessible | mandatory | The Address Table stored in Non-Volatile RAM in a HLS 80xx Bridge. |
| 1.3.6.1.4.1.26.2.1.6.1 | ScalarnvramAddrTab8000Entry | read-write | mandatory | An instance of this object-type exists for each entry in the Address Table stored in Non-Volatile RAM in a HLS 80xx Bridge. The format of the OCTET STRING is: … |
| 1.3.6.1.4.1.26.2.1.6.2 | ScalarnvramAddrTab8000Address | not-accessible | mandatory | The MAC address associated with this entry |
| 1.3.6.1.4.1.26.2.1.7 | ScalarnvramAddrTab8000Filter | read-write | mandatory | Setting this value causes the re-creation of the filtered subset (see the object nvramAddrTab8000FilterEntry) of the Address Table stored in Non-Volatile RAM i… |
| 1.3.6.1.4.1.26.2.1.8 | ScalarnvramAddrTab8000FilterNum | read-only | mandatory | The current number of entries in the filtered subset of entries in the Address Table in Non-Volatile RAM in a HLS Local/Remote Bridge. The filtered subset cons… |
| 1.3.6.1.4.1.26.2.1.9 | ScalarnvramAddrTab8000FilterTab | not-accessible | mandatory | This table contains the filtered subset of the Address Table in Non-Volatile RAM in a HLS Local/Remote Bridge. The filtered subset consists of all entries whic… |
| 1.3.6.1.4.1.26.2.1.9.1 | ScalarnvramAddrTab8000FilterEntry | read-only | mandatory | An instance of this object-type exists for each entry within the filtered subset of the Address Table in Non-Volatile RAM in a HLS Local/Remote Bridge. The fil… |
| 1.3.6.1.4.1.26.2.1.9.2 | ScalarnvramAddrTab8000FilterIndex | not-accessible | mandatory | For the i-th entry, this object has the value i. |
| 1.3.6.1.4.1.26.2.1.10 | ScalarnvramAddrTab8000Delete | write-only | mandatory | Setting this object to a value causes the immediate deletion of a subset of the entries in the Address Table in Non-Volatile RAM in a HLS Local/Remote Bridge. … |
| 1.3.6.1.4.1.26.2.1.11 | ScalarnvramAddrTab8000Update | write-only | mandatory | Setting this object to a value causes an update of the Address Table in Non-Volatile RAM in a HLS Local/Remote Bridge. This update is the combination of the de… |
| 1.3.6.1.4.1.26.2.2 | NoderemoteEthernetBridge | |||
| 1.3.6.1.4.1.26.2.2.1 | ScalarsegmentBlocking | read-write | mandatory | The value of this object is a single octet specifying which address space segments are to be blocked/passed by the bridge (for the purpose of load-sharing betw… |
| 1.3.6.1.4.1.26.2.2.2 | Scalarlinktype | read-only | mandatory | The type of physical interface being used on the serial interface to the remote bridge. |
| 1.3.6.1.4.1.26.2.2.3 | ScalarlinkSaver | read-write | mandatory | The setting of this object controls the use of data compression over the serial link between two bridges. If set to removePadding(1), then any padding for LAN … |
| 1.3.6.1.4.1.26.2.2.4 | ScalarcrcType | read-write | mandatory | The type of CRC used on the serial link between two bridges. Setting this object does not take effect until the next reset of the bridge. When read, the object… |
| 1.3.6.1.4.1.26.2.2.5 | ScalarlinkEncoding | read-write | mandatory | The encoding scheme used on the serial link between two bridges. Setting this object does not take effect until the next reset of the bridge. When read, the ob… |
| 1.3.6.1.4.1.26.2.3 | NodetokenBusBridge | |||
| 1.3.6.1.4.1.26.2.3.2 | ScalartbTransmitLevel | read-write | mandatory | The transmit level used on the bridge's token bus interface. There are sixteen valid transmit levels which occur at 1.5 dBmV intervals in the range 30.5 dBmV t… |
| 1.3.6.1.4.1.26.2.3.3 | ScalartbSlotTime | read-write | mandatory | The slot time for the bridge's token bus interface, in octet-time (i.e. 0.8 microsecond) units. |
| 1.3.6.1.4.1.26.2.3.4 | ScalartbHoldtime | read-write | mandatory | The high priority token hold time, in octet-time (i.e. 0.8 microsecond) units. |
| 1.3.6.1.4.1.26.2.3.5 | ScalartbRotationTime | read-write | mandatory | The maximum ring maintenance rotation time, in octet-time (i.e. 0.8 microsecond) units. |
| 1.3.6.1.4.1.26.2.3.6 | ScalartbRingTimerInitialValue | read-only | mandatory | The initial value to be assigned to the ring maintenance timer, in octet-time (i.e. 0.8 microsecond) units. |
| 1.3.6.1.4.1.26.2.3.7 | ScalartbSolicitCount | read-write | mandatory | The maximum inter-solicit interval, in units of token possessions (i.e. token rotations). |
| 1.3.6.1.4.1.26.2.3.8 | ScalartbResetDefault | write-only | mandatory | Writing a value of resetParms(1) to this object causes the token bus interface parameters to be reset to their default values. |
| 1.3.6.1.4.1.26.2.3.9 | ScalartbFrequency | read-write | mandatory | The frequency ranges used by the interface. Use of the new frequency after a write, occurs after the next reset. |
| 1.3.6.1.4.1.26.2.3.10 | ScalarramAddrTab8200Tab | not-accessible | mandatory | The RAM-resident Address Table in an HLS Backbone Bridge. |
| 1.3.6.1.4.1.26.2.3.10.1 | ScalarramAddrTab8200Entry | read-write | mandatory | An instance of this object-type exists for each entry in the RAM-resident Address Table in a HLS Backbone Bridge. The format of the OCTET STRING is: 1st octet:… |
| 1.3.6.1.4.1.26.2.3.10.2 | ScalarramAddrTab8200Address | not-accessible | mandatory | The MAC address associated with this entry |
| 1.3.6.1.4.1.26.2.3.11 | ScalarramAddrTab8200Filter | read-write | mandatory | Setting this value causes the re-creation of the filtered subset (see the object ramAddrTab8200FilterEntry) of the RAM-resident Address Table in a HLS Backbone… |
| 1.3.6.1.4.1.26.2.3.12 | ScalarramAddrTab8200FilterNum | read-only | mandatory | The current number of entries in the filtered subset of entries in the RAM-resident Address Table in a HLS Backbone Bridge. The filtered subset consists of all… |
| 1.3.6.1.4.1.26.2.3.13 | ScalarramAddrTab8200FilterTab | not-accessible | mandatory | This table contains the filtered subset of the RAM-resident Address Table in a HLS Backbone Bridge. The filtered subset consists of all entries which matched t… |
| 1.3.6.1.4.1.26.2.3.13.1 | ScalarramAddrTab8200FilterEntry | read-only | mandatory | An instance of this object-type exists for each entry in the filtered subset of entries in the RAM-resident Address Table in a HLS Backbone Bridge. The filtere… |
| 1.3.6.1.4.1.26.2.3.13.2 | ScalarramAddrTab8200FilterIndex | not-accessible | mandatory | For the i-th entry, this object has the value i. |
| 1.3.6.1.4.1.26.2.3.14 | ScalarramAddrTab8200Delete | write-only | mandatory | Setting this object to a value causes the immediate deletion of a subset of the entries in the RAM-resident Address Table in a HLS Backbone Bridge. The subset … |
| 1.3.6.1.4.1.26.2.3.15 | ScalarnvramAddrTab8200Tab | not-accessible | mandatory | The Address Table in Non-Volatile RAM in a HLS Backbone Bridge. |
| 1.3.6.1.4.1.26.2.3.15.1 | ScalarnvramAddrTab8200Entry | read-write | mandatory | An instance of this object-type exists for each entry in the Address Table in Non-Volatile RAM in a HLS Backbone Bridge. The format of the OCTET STRING is: 1st… |
| 1.3.6.1.4.1.26.2.3.15.2 | ScalarnvramAddrTab8200Address | not-accessible | mandatory | The MAC address associated with this entry |
| 1.3.6.1.4.1.26.2.3.16 | ScalarnvramAddrTab8200Filter | read-write | mandatory | Setting this value causes the re-creation of the filtered subset (see the object nvramAddrTab8200FilterEntry) of the Address Table in Non-Volatile RAM in a HLS… |
| 1.3.6.1.4.1.26.2.3.17 | ScalarnvramAddrTab8200FilterNum | read-only | mandatory | The current number of entries in the filtered subset of entries in the Address Table in Non-Volatile RAM in a HLS Backbone Bridge. The filtered subset consists… |
| 1.3.6.1.4.1.26.2.3.18 | ScalarnvramAddrTab8200FilterTab | not-accessible | mandatory | This table contains the filtered subset of entries in the Address Table in Non-Volatile RAM in a HLS Backbone Bridge. The filtered subset consists of all entri… |
| 1.3.6.1.4.1.26.2.3.18.1 | ScalarnvramAddrTab8200FilterEntry | read-only | mandatory | An instance of this object-type exists for each entry within the filtered subset of the Address Table in Non-Volatile RAM in a HLS Backbone Bridge. The filtere… |
| 1.3.6.1.4.1.26.2.3.18.2 | ScalarnvramAddrTab8200FilterIndex | not-accessible | mandatory | For the i-th entry, this object has the value i. |
| 1.3.6.1.4.1.26.2.3.19 | ScalarnvramAddrTab8200Delete | write-only | mandatory | Setting this object to a value causes the immediate deletion of a subset of the entries in the Address Table in Non-Volatile RAM in a HLS 8200 Bridge. The subs… |
| 1.3.6.1.4.1.26.2.3.20 | ScalarnvramAddrTab8200Update | write-only | mandatory | Setting this object to a value causes an update of the Address Table in Non-Volatile RAM in a HLS Backbone Bridge. This update is the combination of the deleti… |
| 1.3.6.1.4.1.26.2.3.21 | ScalartbEbitErrors | read-only | mandatory | The number of 802.4 frames received which had the Error-bit set in the trailer. |
| 1.3.6.1.4.1.26.2.3.22 | ScalartbFrameFrags | read-only | mandatory | The number of 802.4 frames received which did not have a valid End delimiter. |
| 1.3.6.1.4.1.26.2.3.23 | ScalartbTokenPassFails | read-only | mandatory | The number of times this station re-transmitted the token to its neighbor because the neighbor failed to transmit within the required time interval. |
| 1.3.6.1.4.1.26.2.4 | ScalarbridgeModel | read-only | mandatory | The HLS model number of the bridge. |
| 1.3.6.1.4.1.26.2.15 | ScalarbridgeMode | read-write | mandatory | The current mode of the bridge. |
| 1.3.6.1.4.1.26.2.16 | ScalarageingOption | read-write | mandatory | The status of the Ageing option in the bridge. |
| 1.3.6.1.4.1.26.2.17 | TablechannelTable | not-accessible | mandatory | The table of per-channel attributes. |
| 1.3.6.1.4.1.26.2.17.1 | RowchannelEntry | not-accessible | mandatory | A channel entry containing attributes applicable to a particular channel. |
| 1.3.6.1.4.1.26.2.17.1.1 | ColumnchLearnMode | read-write | mandatory | The status of learning mode for this channel. |
| 1.3.6.1.4.1.26.2.17.1.2 | ColumnchRestrictMode | read-only | mandatory | The status of Restrict mode for this channel. A channel's Restrict mode must be enabled in order for the channel to have filtering by destination address enabl… |
| 1.3.6.1.4.1.26.2.17.1.3 | ColumnchOriginMode | read-write | mandatory | The status of the Origin mode for this channel. A channel's Origin mode must be enabled in order for the channel to have filtering of non-unicast destination a… |
| 1.3.6.1.4.1.26.2.17.1.4 | ColumnchGroupFwdMode | read-write | mandatory | The value of this object determines whether frames destined for unknown group addresses (i.e. multicast addresses which have not been statically configured) ar… |
| 1.3.6.1.4.1.26.2.17.1.5 | ColumnchIndFwdMode | read-write | mandatory | The value of this object determines whether frames destined for unknown individual addresses (i.e. unicast addresses which are not present in the bridge's forw… |
| 1.3.6.1.4.1.26.2.17.1.6 | ColumnchDefRestrictFlag | read-write | mandatory | The value to which the Restrict flag is set for subsequently (re-)learnt addresses on this channel. When Restrict mode is enabled, frames to adestination addre… |
| 1.3.6.1.4.1.26.2.17.1.7 | ColumnchDefStaticFlag | read-write | mandatory | The value to which the Static flag is set for subsequently learnt addresses on this channel. Addresses with the Static flag set do not age. |
| 1.3.6.1.4.1.26.2.17.1.8 | ColumnchDefOriginFlag | read-write | mandatory | The value to which the Origin flag is set for subsequently (re-)learnt addresses on this channel. When Origin mode is enabled, frames destined for non-unicast … |
| 1.3.6.1.4.1.26.2.17.1.9 | ColumnchInCRCs | read-only | mandatory | The number of packets for which a CRC error has been detected. For channels on which CRC errors can not occur, this object always has a value of 0. |
| 1.3.6.1.4.1.26.2.17.1.10 | ColumnchInOverruns | read-only | mandatory | The number of received packets for which an overrun error occurred. For channels on which overruns can not occur, this object always has a value of 0. |
| 1.3.6.1.4.1.26.2.17.1.11 | ColumnchOutColls | read-only | mandatory | On a CSMA/CD interface, the number of packets for which a collision occurred during transmission. On any other type of interface, this counter is always zero. |
| 1.3.6.1.4.1.26.2.17.1.12 | ColumnchWhos | read-only | mandatory | On a token-bus interface, the number of times the bridge had to ask who its successor is. On any other type of interface, the value of this counter is always z… |
| 1.3.6.1.4.1.26.2.17.1.13 | ColumnchInRunts | read-only | mandatory | The number of undersize packets received on this channel. |
| 1.3.6.1.4.1.26.2.17.1.14 | ColumnchInGiants | read-only | mandatory | The number of oversize packets received on this channel. |
| 1.3.6.1.4.1.26.2.17.1.15 | ColumnchInLenErrors | read-only | mandatory | The number of packets received on this channel, for which the number of bytes received was less than the value in the length field of the packet's header. |
| 1.3.6.1.4.1.26.2.17.1.16 | ColumnchInLocks | read-only | mandatory | The number of times an interface was reset because the interface's receive deadman timer expired. |
| 1.3.6.1.4.1.26.2.17.1.17 | ColumnchOutLocks | read-only | mandatory | The number of times an interface was reset because the interface's transmit deadman timer expired. |
| 1.3.6.1.4.1.26.2.17.1.18 | ColumnchNoBuffers | read-only | mandatory | The number of packets not received because the system was temporarily out of buffers, and so could not transfer the data into memory. |
| 1.3.6.1.4.1.26.2.17.1.19 | ColumnchannelNumber | not-accessible | mandatory | The channel number |
| 1.3.6.1.4.1.26.2.18 | ScalarprotocolBlocking | read-only | deprecated | The set of protocols for which the bridge will not forward any packets. Each octet contains a non-zero value if the corresponding protocol is to be blocked. Th… |
| 1.3.6.1.4.1.26.2.19 | TableresetLogTable | not-accessible | mandatory | Entries in this table record the reasons and times of the most recent resets of the bridge. |
| 1.3.6.1.4.1.26.2.19.1 | RowresetLogEntry | not-accessible | mandatory | The reason why the bridge was reset, and of how long it was up prior to the reset recorded by this entry. |
| 1.3.6.1.4.1.26.2.19.1.1 | Columnreason | read-only | mandatory | The reason for the reset. |
| 1.3.6.1.4.1.26.2.19.1.2 | Columnuptime | read-only | mandatory | The length of time, in seconds, the bridge had been up prior to the reset represented by this entry. |
| 1.3.6.1.4.1.26.2.19.1.3 | ColumnentryNumber | not-accessible | mandatory | The number of this entry where the most recent is entry number 1, the second most recent is entry number 2, etc. |
| 1.3.6.1.4.1.26.2.20 | ScalarpacketSize | read-write | mandatory | The range of frame sizes to be forwarded onto an Ethernet/802.3 network by this bridge. The value standard(1) represents the standard range of 60 through 1536 … |
| 1.3.6.1.4.1.26.2.21 | ScalartransmitDeadmanTimer | read-write | mandatory | The deadman timer for frame transmission on an interface. The value is the maximum length of time, in units of 160 milliseconds, that a frame will await transm… |
| 1.3.6.1.4.1.26.2.22 | ScalarreceiveDeadmanTimer | read-write | mandatory | The deadman timer for frame reception on an interface. The value is not given in units of time, but rather as a count of frames transmitted on the interface. I… |
| 1.3.6.1.4.1.26.2.23 | NodetokenRingBridge | |||
| 1.3.6.1.4.1.26.2.23.1 | ScalartrBridgeNumber | read-write | mandatory | The number of this bridge as used in the 802.5 source routing scheme. |
| 1.3.6.1.4.1.26.2.23.2 | TabletrChannelTable | not-accessible | mandatory | The table which contains an entry per Token-Ring channel on this bridge. Note that entries exist for 'virtual token-ring' channels as well as real token-ring c… |
| 1.3.6.1.4.1.26.2.23.2.1 | RowtrChannelEntry | not-accessible | mandatory | The set of attributes applicable to each of the bridge's Token-Ring channels. |
| 1.3.6.1.4.1.26.2.23.2.1.1 | ColumntrRingNumber | read-write | mandatory | The ring number of this channel as used in the 802.5 source routing |
| 1.3.6.1.4.1.26.2.23.2.1.2 | ColumntrSRAstate | read-write | mandatory | This object affects the Source Routing Accelerator (SRA) chip of the TMS-380 chip set interfacing to this channel. When this object has the value of enabled(1)… |
| 1.3.6.1.4.1.26.2.24 | TableprotocolFilterTable | not-accessible | mandatory | The table which identifies which protocols are being forwarded by the bridge and which are being blocked. |
| 1.3.6.1.4.1.26.2.24.1 | RowprotocolFilterEntry | not-accessible | mandatory | There is one entry in this table for each protocol specifically forwarded or filtered. The first entry is special in that it specifies the handling of all prot… |
| 1.3.6.1.4.1.26.2.24.1.1 | ColumnprotocolFilterStatus | read-write | mandatory | Identifies whether the protocol referenced by this entry is being forwarded or blocked by the bridge. Writing a value of invalid(3) to an instance of this obje… |
| 1.3.6.1.4.1.26.2.24.1.2 | ColumnprotocolFilterType | read-write | mandatory | Identifies the protocol to which this entry refers. This object takes the value 1 for the first entry in the table which has the special meaning of 'others' in… |
| 1.3.6.1.4.1.26.3 | ScalarsysType | read-only | mandatory | The type of system in which the agent is running |
| 1.3.6.1.4.1.26.4 | ScalarserialNumber | read-only | mandatory | The serial number of the system being managed. |
| 1.3.6.1.4.1.26.5 | ScalarbootPromVersion | read-only | mandatory | The version number of the boot prom in the system. The value is an ASCII string. |
| 1.3.6.1.4.1.26.6 | ScalarsysAdmAccess | read-write | mandatory | The method being used to authenticate a user of the system's console/administrative port. |
| 1.3.6.1.4.1.26.7 | ScalarappSwVersion | read-only | mandatory | The version number of the application-software the system is executing. This value is an ASCII string. |
| 1.3.6.1.4.1.26.8 | ScalaruserProfile | read-only | obsolete | |
| 1.3.6.1.4.1.26.9 | ScalarhlsMibVersion | read-only | mandatory | The version number of the HLS-defined MIB extensions supported by the agent. The version of the HLS MIB defined in this document is versionB(2). |
| 1.3.6.1.4.1.26.10 | ScalarmyManager | read-only | deprecated | The manager to which the agent sends traps. |
| 1.3.6.1.4.1.26.11 | ScalarsysReset | write-only | mandatory | Writing to this object causes the agent to reset its system. The value written to the object determines the reset-level. |
| 1.3.6.1.4.1.26.12 | ScalarclearCounters | write-only | mandatory | Writing any value to this object causes the agent to clear (i.e. set to zero) the values of all instances of object-types having the syntax: Counter. |
| 1.3.6.1.4.1.26.13 | ScalarsystemDate | read-write | mandatory | The current system date as known by the agent, formatted as an ASCII string: MM-DD-YY. |
| 1.3.6.1.4.1.26.14 | ScalarsystemTime | read-write | mandatory | The current system time as known by the agent, formatted as an ASCII string: HH:MM:SS. |
| 1.3.6.1.4.1.26.15 | ScalaralarmOption | read-write | obsolete | |
| 1.3.6.1.4.1.26.16 | ScalarsnmpAccess | read-only | obsolete | |
| 1.3.6.1.4.1.26.17 | ScalarmyIpAddress | read-write | mandatory | The agent's IP Address. When a new value is written to this object, the system's IP Address is changed immediately after responding to the request. |
| 1.3.6.1.4.1.26.18 | ScalardefaultGateway | read-write | mandatory | The IP gateway, to which IP datagrams destined for a remote network will be sent unless and until directed otherwise by an ICMP Redirect. |
| 1.3.6.1.4.1.26.19 | ScalarnetMask | read-write | mandatory | The network mask associated with myIpAddress. The value of the mask is an IP Address with all network bits set to 1, and all host bits set to 0. |
| 1.3.6.1.4.1.26.20 | NodehlsSystem | |||
| 1.3.6.1.4.1.26.20.1 | ScalarsnmpAuth | read-write | mandatory | The method by which the agent is to authenticate the SNMP requests it receives. Both the hlsPassword(1) and the hlsPfx(2) methods require that the use of an 'a… |
| 1.3.6.1.4.1.26.20.5 | TabletrapTable | not-accessible | mandatory | The table which identifies the parameters associated with the agent's generation of SNMP traps. |
| 1.3.6.1.4.1.26.20.5.1 | RowtrapEntry | not-accessible | mandatory | There is one entry of this table for each destination to which the agent sends SNMP traps. |
| 1.3.6.1.4.1.26.20.5.1.1 | ColumntrapDestination | read-write | mandatory | The destination IP Address to which traps enabled in this entry's switches are sent. Writing to an instance of this object-type which does not currently exist,… |
| 1.3.6.1.4.1.26.20.5.1.2 | ColumngenericTrapSwitches | read-write | mandatory | This object's value contains one octet for each type of SNMP-standard generic trap. If the agent is enabled to send a particular type of trap to this entry's d… |
| 1.3.6.1.4.1.26.20.5.1.3 | ColumnspecificTrapSwitches | read-write | mandatory | This object's value contains one octet for each type of enterprise-specific trap. If the agent is enabled to send a particular type of trap to this entry's des… |
| 1.3.6.1.4.1.26.20.5.1.4 | ColumntrapEntryNumber | not-accessible | mandatory | An integer in the range 1 <= i <= N, where N is the maximum number of trap destinations for this agent. |
| 1.3.6.1.4.1.26.21 | NodehlsTemporary | |||
| 1.3.6.1.4.1.26.21.1 | NodehlsDot1dBridge | |||
| 1.3.6.1.4.1.26.21.1.1 | NodehlsDot1dBase | |||
| 1.3.6.1.4.1.26.21.1.1.1 | ScalarhlsDot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.26.21.1.1.2 | ScalarhlsDot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. The value can also be determined by examining the number of entries in the port- specific table in the … |
| 1.3.6.1.4.1.26.21.1.1.3 | ScalarhlsDot1dBaseBridgeUpTime | read-only | mandatory | The time (in hundredths of a second) since the bridging entity was last reset or initialized. |
| 1.3.6.1.4.1.26.21.1.1.4 | ScalarhlsDot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.26.21.1.1.5 | TablehlsDot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.4.1.26.21.1.1.5.1 | RowhlsDot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.26.21.1.1.5.1.1 | ColumnhlsDot1dBasePortIfIndex | read-only | mandatory | Identifies the port for which this entry contains bridge management information. The value of this object for a particular port has the same value as the ifInd… |
| 1.3.6.1.4.1.26.21.1.1.5.1.2 | ColumnhlsDot1dBasePortNoBufferDiscards | read-only | mandatory | The number of frames discarded by this port due to insufficient internal buffering. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.26.21.1.1.5.1.3 | ColumnhlsDot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.26.21.1.1.5.1.4 | ColumnhlsDot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.26.21.1.2 | NodehlsDot1dStp | |||
| 1.3.6.1.4.1.26.21.1.2.1 | ScalarhlsDot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. Early DEC Spanning Tree implementations will return 'decprotocol(2)'. IEEE 802.1d imp… |
| 1.3.6.1.4.1.26.21.1.2.2 | ScalarhlsDot1dStpPriority | read-write | mandatory | In a Spanning Tree Protocol PDU, this bridge is identified by an 8 octet string composed of hlsDot1dStpPriority concatenated with hlsDot1dBaseId. One of the us… |
| 1.3.6.1.4.1.26.21.1.2.3 | ScalarhlsDot1dStpLastTopChange | read-only | mandatory | The value of sysUptIme on the occurrence of last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.26.21.1.2.4 | ScalarhlsDot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.26.21.1.2.5 | ScalarhlsDot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.26.21.1.2.6 | ScalarhlsDot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.26.21.1.2.7 | ScalarhlsDot1dStpRootPort | read-only | mandatory | Identifies the port which offers the lowest cost path from this bridge to the root bridge. The value of this object indicates the port for which the ifIndex ob… |
| 1.3.6.1.4.1.26.21.1.2.8 | ScalarhlsDot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.26.21.1.2.9 | ScalarhlsDot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.26.21.1.2.10 | ScalarhlsDot1dStpForwardDelay | read-only | mandatory | This time value is measured in units of hundredths of a second. It is used for two purposes. Firstly, it controls how fast a port changes its spanning state wh… |
| 1.3.6.1.4.1.26.21.1.2.11 | ScalarhlsDot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.26.21.1.2.12 | TablehlsDot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.26.21.1.2.12.1 | RowhlsDot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.1 | ColumnhlsDot1dStpPortIfIndex | read-only | mandatory | Identifies the port for which this entry contains Spanning Tree Protocol management information. The value of this object for a particular port has the same va… |
| 1.3.6.1.4.1.26.21.1.2.12.1.2 | ColumnhlsDot1dStpPortPriority | read-write | mandatory | The concatenation of hlsDot1dStpPortPriority and hlsDot1dStpPortNum make up the Port Identifier parameter in all Configuration bridge PDUs output by this port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.3 | ColumnhlsDot1dStpPortPortNum | read-only | mandatory | This object when concatentated with hlsDot1dStpPortPriority make up the Port Identifier included in all bridge PDUs generated by this bridge. The value of this… |
| 1.3.6.1.4.1.26.21.1.2.12.1.4 | ColumnhlsDot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.26.21.1.2.12.1.5 | ColumnhlsDot1dStpPortMultiCastAddr | read-only | mandatory | The MAC address used as the destination for all Spanning Tree Protocol PDU generated out this port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.6 | ColumnhlsDot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.7 | ColumnhlsDot1dStpPortDesignatedRoot | read-only | mandatory | The value of the Bridge Identifier that should be seen in bridge PDUs received on this port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.8 | ColumnhlsDot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.26.21.1.2.12.1.9 | ColumnhlsDot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.26.21.1.2.12.1.10 | ColumnhlsDot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.26.21.1.2.12.1.11 | ColumnhlsDot1dStpPortInBPDUs | read-only | mandatory | The number of Spanning Tree Protocol BPDUs received on this port. |
| 1.3.6.1.4.1.26.21.1.2.12.1.12 | ColumnhlsDot1dStpPortOutBPDUs | read-only | mandatory | The number of Spanning Tree Protocol BPDUs transmitted on this port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |