HP-SN-ROOT-MIB
2868 objects
This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information bases (MIBs) for managing MPLS networks.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.1 | NodesnTrapChasPwrSupply | The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4… | ||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2 | NodesnTrapLockedAddressViolation | The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port. | ||
| 1.3.6.1.4.1.11.2.3 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.7 | NodenetElement | |||
| 1.3.6.1.4.1.11.2.3.7.11 | NodehpEtherSwitch | |||
| 1.3.6.1.4.1.11.2.3.7.11.12 | NodehpSwitchCore | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1 | Nodeswitch | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1 | NodesnChassis | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1 | NodesnChasGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.1 | ScalarsnChasType | read-only | mandatory | The chassis type represents the type of Foundry product being managed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.2 | ScalarsnChasSerNum | read-only | mandatory | The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.3 | ScalarsnChasPwrSupplyStatus | read-only | mandatory | A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble).… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.4 | ScalarsnChasFanStatus | read-only | mandatory | A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning 0 fan fai… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.5 | ScalarsnChasMainBrdDescription | read-only | mandatory | The main board description string. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.6 | ScalarsnChasMainPortTotal | read-only | mandatory | The total number of ports for the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.7 | ScalarsnChasExpBrdDescription | read-only | mandatory | The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.8 | ScalarsnChasExpPortTotal | read-only | mandatory | The total number of ports for the expansion board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.9 | ScalarsnChasStatusLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.10 | ScalarsnChasTrafficLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11 | ScalarsnChasMediaLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.12 | ScalarsnChasEnablePwrSupplyTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate power supply failure traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.13 | ScalarsnChasMainBrdId | read-only | mandatory | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.14 | ScalarsnChasExpBrdId | read-only | mandatory | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.15 | ScalarsnChasSpeedLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.16 | ScalarsnChasEnableFanTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate fan failure traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.17 | ScalarsnChasIdNumber | read-write | mandatory | An administratively-assigned chassis identity number, used by inventory control. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.18 | ScalarsnChasActualTemperature | read-only | mandatory | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.19 | ScalarsnChasWarningTemperature | read-write | mandatory | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.20 | ScalarsnChasShutdownTemperature | read-write | mandatory | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.21 | ScalarsnChasEnableTempWarnTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate temperature warning traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.22 | ScalarsnChasFlashCard | read-only | mandatory | A bit array that contains the value of the flash card status. This is a packed bit string. The status of each flash card is encoded into one bit. bit value mea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.23 | ScalarsnChasFlashCardLeds | read-only | mandatory | A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.24 | ScalarsnChasNumSlots | read-only | mandatory | Number of slots of the chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.25 | ScalarsnChasArchitectureType | read-only | mandatory | Architecture type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.26 | ScalarsnChasProductType | read-only | mandatory | Product type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2 | NodesnChasPwr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1 | TablesnChasPwrSupplyTable | not-accessible | mandatory | A table of each power supply information. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1 | RowsnChasPwrSupplyEntry | not-accessible | mandatory | A row in the power supply table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.1 | ColumnsnChasPwrSupplyIndex | read-only | mandatory | The index to power supply table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.2 | ColumnsnChasPwrSupplyDescription | read-only | mandatory | The power supply description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.3 | ColumnsnChasPwrSupplyOperStatus | read-only | mandatory | The power supply operation status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3 | NodesnChasFan | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1 | TablesnChasFanTable | not-accessible | mandatory | A table of each fan information. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1 | RowsnChasFanEntry | not-accessible | mandatory | A row in the fan table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.1 | ColumnsnChasFanIndex | read-only | mandatory | The index to fan table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.2 | ColumnsnChasFanDescription | read-only | mandatory | The fan description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.3 | ColumnsnChasFanOperStatus | read-only | mandatory | The fan operation status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2 | NodesnAgentSys | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1 | NodesnAgentGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.1 | ScalarsnAgReload | read-write | mandatory | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4)......… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.2 | ScalarsnAgEraseNVRAM | read-write | mandatory | Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is era… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.3 | ScalarsnAgWriteNVRAM | read-write | mandatory | Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.4 | ScalarsnAgConfigFromNVRAM | not-accessible | mandatory | Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.5 | ScalarsnAgTftpServerIp | read-write | mandatory | The tftp server address, this will be used for both download/upload image file and config file. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.6 | ScalarsnAgImgFname | read-write | mandatory | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7 | ScalarsnAgImgLoad | read-write | mandatory | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.8 | ScalarsnAgCfgFname | read-write | mandatory | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple f… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.9 | ScalarsnAgCfgLoad | read-write | mandatory | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongF… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.10 | ScalarsnAgDefGwayIp | read-write | mandatory | The default gateway (router) address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.11 | ScalarsnAgImgVer | read-only | mandatory | The version of the running software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.12 | ScalarsnAgFlashImgVer | read-only | mandatory | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.13 | ScalarsnAgGblIfIpAddr | read-write | mandatory | The interface ip address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.14 | ScalarsnAgGblIfIpMask | read-write | mandatory | The interface ip address mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.15 | ScalarsnAgGblPassword | read-write | mandatory | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.16 | ScalarsnAgTrpRcvrCurEntry | read-only | mandatory | The current total entries of the Trap Receiver Table are created. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.19 | ScalarsnAgGblDataRetrieveMode | read-write | mandatory | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nex… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.20 | ScalarsnAgSystemLog | read-write | mandatory | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and fol… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.21 | ScalarsnAgGblEnableColdStartTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.22 | ScalarsnAgGblEnableLinkUpTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate link up traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.23 | ScalarsnAgGblEnableLinkDownTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate link down traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.24 | ScalarsnAgGblPasswordChangeMode | read-only | mandatory | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interf… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.25 | ScalarsnAgGblReadOnlyCommunity | read-write | mandatory | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.26 | ScalarsnAgGblReadWriteCommunity | read-write | mandatory | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.27 | ScalarsnAgGblCurrentSecurityLevel | read-only | mandatory | This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.28 | ScalarsnAgGblSecurityLevelSet | read-write | mandatory | This shows which the security level password to be set. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.29 | ScalarsnAgGblLevelPasswordsMask | read-only | mandatory | This shows the bitmap of level passwords which successfully assigned to the system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.30 | ScalarsnAgGblQueueOverflow | read-only | mandatory | false - The device queues are not overflow. true - The device queues are overflow. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.31 | ScalarsnAgGblBufferShortage | read-only | mandatory | false - The device buffers are adequate. true - The device buffers are in shortage. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.32 | ScalarsnAgGblDmaFailure | read-only | mandatory | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.33 | ScalarsnAgGblResourceLowWarning | read-only | mandatory | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.34 | ScalarsnAgGblExcessiveErrorWarning | read-only | mandatory | false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.35 | ScalarsnAgGblCpuUtilData | read-only | mandatory | The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilColle… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.36 | ScalarsnAgGblCpuUtilCollect | read-write | deprecated | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.37 | ScalarsnAgGblTelnetTimeout | read-write | mandatory | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.38 | ScalarsnAgGblEnableWebMgmt | read-write | mandatory | Enable/disable web management. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.39 | ScalarsnAgGblSecurityLevelBinding | read-only | mandatory | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.40 | ScalarsnAgGblEnableSLB | read-only | mandatory | Enable/disable Server Load Balancing. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.41 | ScalarsnAgSoftwareFeature | read-only | mandatory | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For ea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.42 | ScalarsnAgGblEnableModuleInsertedTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.43 | ScalarsnAgGblEnableModuleRemovedTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.44 | ScalarsnAgGblTrapMessage | read-only | mandatory | A generic trap message string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.45 | ScalarsnAgGblEnableTelnetServer | read-write | mandatory | Enable or disable telnet server in device. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.46 | ScalarsnAgGblTelnetPassword | read-write | mandatory | Telnet Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.47 | ScalarsnAgBuildDate | read-only | mandatory | The date of the built software. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.48 | ScalarsnAgBuildtime | read-only | mandatory | The time of the built software. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.49 | ScalarsnAgBuildVer | read-only | mandatory | The version of the built software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.50 | ScalarsnAgGblCpuUtil1SecAvg | read-only | mandatory | The statistics collection of 1 second CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.51 | ScalarsnAgGblCpuUtil5SecAvg | read-only | mandatory | The statistics collection of 5 second CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.52 | ScalarsnAgGblCpuUtil1MinAvg | read-only | mandatory | The statistics collection of 1 minute CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.53 | ScalarsnAgGblDynMemUtil | read-only | mandatory | The system dynamic memory utilization, in unit of percentage. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.54 | ScalarsnAgGblDynMemTotal | read-only | mandatory | The total amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.55 | ScalarsnAgGblDynMemFree | read-only | mandatory | The free amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.56 | ScalarsnAgImgLoadSPModuleType | read-write | mandatory | The switch processor module type of which that receives the downloaded image. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.57 | ScalarsnAgImgLoadSPModuleNumber | read-write | mandatory | The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.58 | ScalarsnAgTrapHoldTime | read-write | mandatory | The time in seconds for which traps will be witheld during system initialization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.59 | ScalarsnAgSFlowSourceInterface | read-write | mandatory | Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.60 | ScalarsnAgGblTelnetLoginTimeout | read-write | mandatory | Telnet session login timeout value in minutes. Default is 1 minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.61 | ScalarsnAgGblBannerExec | read-write | mandatory | EXEC process creation banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.62 | ScalarsnAgGblBannerIncoming | read-write | mandatory | Incoming terminal line banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.63 | ScalarsnAgGblBannerMotd | read-write | mandatory | Message-of-the-day banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2 | NodesnAgentBrd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1 | TablesnAgentBrdTable | not-accessible | mandatory | A table of each physical board information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1 | RowsnAgentBrdEntry | not-accessible | mandatory | A row in the Agent Board table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.1 | ColumnsnAgentBrdIndex | read-only | mandatory | The index to the Agent Interface Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.2 | ColumnsnAgentBrdMainBrdDescription | read-only | mandatory | The main board description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.3 | ColumnsnAgentBrdMainBrdId | read-only | mandatory | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.4 | ColumnsnAgentBrdMainPortTotal | read-only | mandatory | The total number of ports for the main board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.5 | ColumnsnAgentBrdExpBrdDescription | read-only | mandatory | The expansion board description string. Expansion board are those boards attaching on the main board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.6 | ColumnsnAgentBrdExpBrdId | read-only | mandatory | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.7 | ColumnsnAgentBrdExpPortTotal | read-only | mandatory | The total number of ports for the expansion board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.8 | ColumnsnAgentBrdStatusLeds | read-only | deprecated | A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.9 | ColumnsnAgentBrdTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maxi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.10 | ColumnsnAgentBrdMediaLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.11 | ColumnsnAgentBrdSpeedLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.12 | ColumnsnAgentBrdModuleStatus | read-only | mandatory | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.13 | ColumnsnAgentBrdRedundantStatus | read-only | mandatory | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.14 | ColumnsnAgentBrdAlarmLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.15 | ColumnsnAgentBrdTxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.16 | ColumnsnAgentBrdRxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.17 | ColumnsnAgentBrdStatusLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.18 | ColumnsnAgentBrdTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.19 | ColumnsnAgentBrdMediaLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.20 | ColumnsnAgentBrdSpeedLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.21 | ColumnsnAgentBrdAlarmLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.22 | ColumnsnAgentBrdTxTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.23 | ColumnsnAgentBrdRxTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3 | NodesnAgentTrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1 | TablesnAgTrpRcvrTable | not-accessible | mandatory | A table of managers which to send traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1 | RowsnAgTrpRcvrEntry | not-accessible | mandatory | A row in the trap receiver table. The column snAgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects snAgTrp… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.1 | ColumnsnAgTrpRcvrIndex | read-only | mandatory | The index to the Trap Receiver Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.2 | ColumnsnAgTrpRcvrIpAddr | read-write | mandatory | The ip address for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.3 | ColumnsnAgTrpRcvrComm | read-write | mandatory | Community string to use. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.4 | ColumnsnAgTrpRcvrStatus | read-write | mandatory | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: ignore(5)...don't use this entry t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.5 | ColumnsnAgTrpRcvrUDPPort | read-write | mandatory | UDP port number of the trap receiver. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4 | NodesnAgentBoot | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1 | TablesnAgBootSeqTable | not-accessible | mandatory | A table of image load sequnce instructions to the boot code. Boot code will start from instruction of the first valid entry to load the image. If failed, it wi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1 | RowsnAgBootSeqEntry | not-accessible | mandatory | A row in the boot sequence table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.1 | ColumnsnAgBootSeqIndex | read-only | mandatory | The index to the boot sequence table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.2 | ColumnsnAgBootSeqInstruction | read-write | mandatory | The instruction for the boot code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.3 | ColumnsnAgBootSeqIpAddr | read-write | mandatory | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.4 | ColumnsnAgBootSeqFilename | read-write | mandatory | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.5 | ColumnsnAgBootSeqRowStatus | read-write | mandatory | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5 | NodesnAgCfgEos | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1 | TablesnAgCfgEosTable | not-accessible | mandatory | This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1 | RowsnAgCfgEosEntry | not-accessible | mandatory | An EOS row in the table of encoded octet strings for table snAgCfgEosTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.1 | ColumnsnAgCfgEosIndex | read-only | mandatory | Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.2 | ColumnsnAgCfgEosPacket | read-write | mandatory | An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.3 | ColumnsnAgCfgEosChkSum | read-write | mandatory | A checksum of each configuration file data packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6 | NodesnAgentLog | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1 | NodesnAgSysLogGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.1 | ScalarsnAgSysLogGblEnable | read-write | mandatory | Enable/disable system logging. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.2 | ScalarsnAgSysLogGblBufferSize | read-write | mandatory | The number of dynamic system logging entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.3 | ScalarsnAgSysLogGblClear | read-write | mandatory | Clear dynamic and/or static system logging buffers. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.4 | ScalarsnAgSysLogGblCriticalLevel | read-write | mandatory | Filter events going to the logging buffer. This is a packed bit string object of which each bit has the following meaning: (bit 0 is the least significant bit)… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.5 | ScalarsnAgSysLogGblLoggedCount | read-only | mandatory | The number events logged in the system logging buffer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.6 | ScalarsnAgSysLogGblDroppedCount | read-only | mandatory | The number of events dropped. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.7 | ScalarsnAgSysLogGblFlushedCount | read-only | mandatory | The number of times that the system logging buffer was cleared. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.8 | ScalarsnAgSysLogGblOverrunCount | read-only | mandatory | The number of times that the system logging buffer was wrapped around. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.9 | ScalarsnAgSysLogGblServer | read-write | deprecated | IP address of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.10 | ScalarsnAgSysLogGblFacility | read-write | mandatory | Facility code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2 | TablesnAgSysLogBufferTable | not-accessible | mandatory | Dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1 | RowsnAgSysLogBufferEntry | not-accessible | mandatory | A row in the dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.1 | ColumnsnAgSysLogBufferIndex | read-only | mandatory | The index to the dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.2 | ColumnsnAgSysLogBufferTimeStamp | read-only | mandatory | A time stamp when the event is logged. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.3 | ColumnsnAgSysLogBufferCriticalLevel | read-only | mandatory | The critical level of this event. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.4 | ColumnsnAgSysLogBufferMessage | read-only | mandatory | The system logging message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.5 | ColumnsnAgSysLogBufferCalTimeStamp | read-only | mandatory | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3 | TablesnAgStaticSysLogBufferTable | not-accessible | mandatory | Static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1 | RowsnAgStaticSysLogBufferEntry | not-accessible | mandatory | A row in the static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.1 | ColumnsnAgStaticSysLogBufferIndex | read-only | mandatory | The index to the static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.2 | ColumnsnAgStaticSysLogBufferTimeStamp | read-only | mandatory | A time stamp when the event is logged. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.3 | ColumnsnAgStaticSysLogBufferCriticalLevel | read-only | mandatory | The critical level of this event. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.4 | ColumnsnAgStaticSysLogBufferMessage | read-only | mandatory | The system logging message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.5 | ColumnsnAgStaticSysLogBufferCalTimeStamp | read-only | mandatory | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4 | TablesnAgSysLogServerTable | not-accessible | mandatory | System Log Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1 | RowsnAgSysLogServerEntry | not-accessible | mandatory | A row in the SysLog Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.1 | ColumnsnAgSysLogServerIP | read-write | mandatory | IP address of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.2 | ColumnsnAgSysLogServerUDPPort | read-write | mandatory | UDP port number of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.3 | ColumnsnAgSysLogServerRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7 | NodesnAgentSysParaConfig | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1 | TablesnAgentSysParaConfigTable | not-accessible | mandatory | A table of Agent of each board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1 | RowsnAgentSysParaConfigEntry | not-accessible | mandatory | A row in the Agent System Parameters Configuation table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.1 | ColumnsnAgentSysParaConfigIndex | read-only | mandatory | The index to the Agent System Parameters Configuation Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.2 | ColumnsnAgentSysParaConfigDescription | read-only | mandatory | The main board description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.3 | ColumnsnAgentSysParaConfigMin | read-only | mandatory | The minimum value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.4 | ColumnsnAgentSysParaConfigMax | read-only | mandatory | The maximum value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.5 | ColumnsnAgentSysParaConfigDefault | read-only | mandatory | The default value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.6 | ColumnsnAgentSysParaConfigCurrent | read-write | mandatory | The current configurated value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8 | NodesnAgentConfigModule | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1 | TablesnAgentConfigModuleTable | not-accessible | mandatory | A table of each configured module information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1 | RowsnAgentConfigModuleEntry | not-accessible | mandatory | A row in the Agent Configured Module table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.1 | ColumnsnAgentConfigModuleIndex | read-only | mandatory | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.2 | ColumnsnAgentConfigModuleType | read-write | mandatory | The Configured Module Type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.3 | ColumnsnAgentConfigModuleRowStatus | read-write | mandatory | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.4 | ColumnsnAgentConfigModuleDescription | read-only | mandatory | A description of the configured module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.5 | ColumnsnAgentConfigModuleOperStatus | read-only | mandatory | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.6 | ColumnsnAgentConfigModuleSerialNumber | read-only | mandatory | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.7 | ColumnsnAgentConfigModuleNumberOfPorts | read-only | mandatory | The number of ports of module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.8 | ColumnsnAgentConfigModuleMgmtModuleType | read-only | mandatory | Management module type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.9 | ColumnsnAgentConfigModuleNumberOfCpus | read-only | mandatory | The number of module CPUs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9 | NodesnAgentUser | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1 | NodesnAgentUserGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1.1 | ScalarsnAgentUserMaxAccnt | read-only | mandatory | Maximum number of user account entries can be configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2 | TablesnAgentUserAccntTable | not-accessible | mandatory | A table of user account information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1 | RowsnAgentUserAccntEntry | not-accessible | mandatory | A row in the Agent User table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.1 | ColumnsnAgentUserAccntName | read-only | mandatory | The user name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.2 | ColumnsnAgentUserAccntPassword | read-write | mandatory | The user password. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.3 | ColumnsnAgentUserAccntEncryptCode | read-write | mandatory | The password encryption method code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.4 | ColumnsnAgentUserAccntPrivilege | read-write | mandatory | The user privilege. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.5 | ColumnsnAgentUserAccntRowStatus | read-write | mandatory | To create or delete a user account table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10 | NodesnAgentRedundant | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1 | NodesnAgentRedunGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.1 | ScalarsnAgentRedunActiveMgmtMod | read-write | mandatory | Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to flash storage and reboot the sy… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.2 | ScalarsnAgentRedunSyncConfig | read-write | mandatory | Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second. Setting a value 0 will disab… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.3 | ScalarsnAgentRedunBkupCopyBootCode | read-write | mandatory | If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.4 | ScalarsnAgentEnableMgmtModRedunStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.5 | ScalarsnAgentRedunBkupBootLoad | read-write | mandatory | Action object to down load a new boot code from boot flash storage of the active management module to the backup management module. The following are returned … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.6 | ScalarsnAgentRedunSwitchOver | read-write | mandatory | To force a switch-over from standby to active state if the backup management module exists in a chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11 | NodesnAgentCpu | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1 | TablesnAgentCpuUtilTable | not-accessible | mandatory | Table to list utilization for all CPUs in the device. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1 | RowsnAgentCpuUtilEntry | not-accessible | mandatory | A row in the CPU utilization table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.1 | ColumnsnAgentCpuUtilSlotNum | read-only | mandatory | The slot number of module which contains the cpu. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.2 | ColumnsnAgentCpuUtilCpuId | read-only | mandatory | The id of cpu. For non-VM1/WSM management module, there is one CPU. For VM1/WSM there's one management CPU and three slave CPUs. The management CPU could be tu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.3 | ColumnsnAgentCpuUtilInterval | read-only | mandatory | The value, in seconds, for this utilization. For both management and slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.4 | ColumnsnAgentCpuUtilValue | read-only | mandatory | The statistical CPU utilization in units of one-hundredth of a percent. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12 | NodesnAgentHw | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1 | TablesnAgentHwICBMCounterTable | not-accessible | mandatory | Table to list the ICBM counter values. This table is not supported on 10G module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1 | RowsnAgentHwICBMCounterEntry | not-accessible | mandatory | A row representing ICBM counter values for that slot. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.1 | ColumnsnAgentHwICBMCounterSlot | read-only | mandatory | Slot number where ICBM resides. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.2 | ColumnsnAgentHwICBMCounterDMA | read-only | mandatory | DMA Id within a slot where ICBM resides. Valid only for Jetcore modules. For non-Jetcore modules, this index is ignored by the agent. In this case, value 0 wil… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.3 | ColumnsnAgentHwICBMCounterFreeDepth | read-only | mandatory | Current depth of the free queue for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.4 | ColumnsnAgentHwICBMCounterWriteDrop | read-only | mandatory | Write sequencer drop count for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.5 | ColumnsnAgentHwICBMCounterWriteInput | read-only | mandatory | Write sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.6 | ColumnsnAgentHwICBMCounterWriteOutput | read-only | mandatory | Write sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.7 | ColumnsnAgentHwICBMCounterReadInput | read-only | mandatory | Read sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.8 | ColumnsnAgentHwICBMCounterReadOutput | read-only | mandatory | Read sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3 | NodesnSwitch | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1 | NodesnSwInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.1 | ScalarsnSwGroupOperMode | read-write | mandatory | noVLan(1) represents all switch ports with no virtual LAN by port (no Port VLAN), and with no tag assigned. vlanByPort(2) represents all switch ports with Basi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.2 | ScalarsnSwGroupIpL3SwMode | read-write | mandatory | The Switch Group is configured with the Layer3 IP Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer3… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.3 | ScalarsnSwGroupIpMcastMode | read-write | mandatory | The Switch Group is configured with the IP Multicast pruning mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IP… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.4 | ScalarsnSwGroupDefaultCfgMode | read-write | mandatory | The Switch Group is configured with the Default configuration. If the default configuration gets overwritten, the state will change to non-default. default(1).… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.5 | ScalarsnSwGroupSwitchAgeTime | read-write | mandatory | The Switch Age time is 180sec by default. The configured range is 10 to 10,000sec. The time represents the time span to age out an MAC Address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.6 | ScalarsnVLanGroupVlanCurEntry | read-only | mandatory | The current total entry number of VLANs are configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.7 | ScalarsnVLanGroupSetAllVLan | read-write | mandatory | The value of this object is the VLanIndex of a particalur entry in snVLanByPortTable (snVLanByPortVLanIndex). All the attributes of that row of table except Po… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.8 | ScalarsnSwPortSetAll | read-write | mandatory | The value of this object is the index number of the snSwPortInfoTable (snSwPortInfoPortIndex). snSwPortInfoMonitorMode, snSwPortInfoTagMode, snSwPortInfoChnMod… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.9 | ScalarsnFdbTableCurEntry | read-only | mandatory | The current total entry number of FDB are configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.10 | ScalarsnFdbTableStationFlush | read-write | mandatory | The following values of the flush state can only be read: normal(1)... normal state error(2)... operation failed flushing(4)... in process The following value … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11 | ScalarsnPortStpSetAll | read-write | mandatory | The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority, snPortStpPathCost, the read-write STP related attributes of… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12 | ScalarsnSwProbePortNum | read-write | mandatory | A chassis switch probe port is operated as a traffic analyzer port and only one port can be assigned in the chassis. The bit 0 to bit 7: port number. The bit 8… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.13 | ScalarsnSw8021qTagMode | read-write | mandatory | The Switch Group is configured with the IEEE802.1q Tagging mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate IEEE… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.14 | ScalarsnSwGlobalStpMode | read-write | mandatory | Spanning Tree System Global Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spann… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.15 | ScalarsnSwIpMcastQuerierMode | read-write | mandatory | The IP Multicast pruning mode is configured either Non-Querier or Querier mode and the default is querier mode. querier(1)...........when prunning traffic loca… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.17 | ScalarsnSwViolatorPortNumber | read-only | mandatory | The port number of the switch or router that received a violator packet. It is included in the locked address violation trap. The bit 0 to bit 7: port number. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.18 | ScalarsnSwViolatorMacAddress | read-only | mandatory | The source address of the violator packet received by the switch or router. It is included in the locked address violation trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.19 | ScalarsnVLanGroupVlanMaxEntry | read-write | mandatory | The maximum number of VLAN entries are allowed to configure. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.20 | ScalarsnSwEosBufferSize | read-only | mandatory | A specific buffer size for all the different EOS buffers. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.21 | ScalarsnVLanByPortEntrySize | read-only | mandatory | The size of each VLAN table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.22 | ScalarsnSwPortEntrySize | read-only | mandatory | The size of each port table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.23 | ScalarsnFdbStationEntrySize | read-only | mandatory | The size of each Fdb station table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.24 | ScalarsnPortStpEntrySize | read-only | mandatory | The size of each port stp table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.25 | ScalarsnSwEnableBridgeNewRootTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate bridge new root traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.26 | ScalarsnSwEnableBridgeTopoChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate bridge topology change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.27 | ScalarsnSwEnableLockedAddrViolationTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate locked address violation traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.28 | ScalarsnSwIpxL3SwMode | read-write | mandatory | The Switch Group is configured with the Layer3 IPX Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........activate Layer… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.29 | ScalarsnVLanByIpSubnetMaxSubnets | read-only | mandatory | The maximum number of subnets for each IP VLAN. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.30 | ScalarsnVLanByIpxNetMaxNetworks | read-only | mandatory | The maximum number of networks for each IPX VLAN. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.31 | ScalarsnSwProtocolVLanMode | read-write | mandatory | disabled(0) - represents system with Protocol VLAN disabled. enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.32 | ScalarsnMacStationVLanId | read-write | mandatory | This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table. (dot1dTpFdbTable). Since the dot1dTpFdbTable index is the MAC … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.33 | ScalarsnSwClearCounters | read-write | mandatory | valid(0) - a SNMP-GET of this mib shows that it is valid command to use. clear(1) - represents clear counter command of the following counters: Dot3, MIB2, IP … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.34 | ScalarsnSw8021qTagType | read-write | mandatory | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.35 | ScalarsnSwBroadcastLimit | read-write | mandatory | Limit the number of broadcast packets to forward out of the switch ports. This object specifies the number of broadcast packets per second. Setting a value of … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.36 | ScalarsnSwMaxMacFilterPerSystem | read-only | mandatory | The maximum number of MAC Filters per system in the MAC Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.37 | ScalarsnSwMaxMacFilterPerPort | read-only | mandatory | The maximum number of MAC Filters per port in the Port MAC Access Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.38 | ScalarsnSwDefaultVLanId | read-write | mandatory | The VLAN ID of the DEFAULT PORT-VLAN. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.39 | ScalarsnSwGlobalAutoNegotiate | read-write | mandatory | This feature only applies to Gigabit Ethernet ports. If set to disable(0), all Gigabit Ethernet ports will be put to non- negotiation mode. If set to enable(1)… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.40 | ScalarsnSwQosMechanism | read-write | mandatory | Indicates whether the qos mechanism is strict or weighted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.41 | ScalarsnSwSingleStpMode | read-write | mandatory | Single Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is disabled mode. enabled(1)...........activate Sing… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.42 | ScalarsnSwFastStpMode | read-write | mandatory | Fast Spanning Tree System Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Fast Sp… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2 | NodesnVLanInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1 | TablesnVLanByPortTable | not-accessible | deprecated | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1 | RowsnVLanByPortEntry | not-accessible | deprecated | An entry in the VLAN By Port Information table. snVLanByPortVLanIndex = 1 and with snVLanByPortVLanId = 1 together implies all attributes applying to the Globa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.1 | ColumnsnVLanByPortVLanIndex | read-only | deprecated | The VLAN ID index must not be greater than the snVLanGroupVlanMaxEntry. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.2 | ColumnsnVLanByPortVLanId | read-write | deprecated | The VLAN ID index to the VLAN By Port Info Table. Each VLAN Identifier can have a membership of multiple ports. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.3 | ColumnsnVLanByPortPortMask | read-write | deprecated | The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.4 | ColumnsnVLanByPortQos | read-write | deprecated | The Stand alone stackable switch VLAN Priority values are: low(0) high(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), level3(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.5 | ColumnsnVLanByPortStpMode | read-write | deprecated | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disab… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.6 | ColumnsnVLanByPortStpPriority | read-write | deprecated | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.7 | ColumnsnVLanByPortStpGroupMaxAge | read-write | deprecated | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.8 | ColumnsnVLanByPortStpGroupHelloTime | read-write | deprecated | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.9 | ColumnsnVLanByPortStpGroupForwardDelay | read-write | deprecated | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.10 | ColumnsnVLanByPortRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.11 | ColumnsnVLanByPortOperState | read-only | deprecated | By default, this mode is set to notActivated(0). notActivated(0)...the VLAN entry is not activated and not in running mode. activated(1)......the VLAN entry is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.12 | ColumnsnVLanByPortBaseNumPorts | read-only | deprecated | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.13 | ColumnsnVLanByPortBaseType | read-only | deprecated | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.14 | ColumnsnVLanByPortStpProtocolSpecification | read-only | deprecated | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.15 | ColumnsnVLanByPortStpMaxAge | read-only | deprecated | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.16 | ColumnsnVLanByPortStpHelloTime | read-only | deprecated | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.17 | ColumnsnVLanByPortStpHoldTime | read-only | deprecated | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.18 | ColumnsnVLanByPortStpForwardDelay | read-only | deprecated | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.19 | ColumnsnVLanByPortStpTimeSinceTopologyChange | read-only | deprecated | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.20 | ColumnsnVLanByPortStpTopChanges | read-only | deprecated | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.21 | ColumnsnVLanByPortStpRootCost | read-only | deprecated | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.22 | ColumnsnVLanByPortStpRootPort | read-only | deprecated | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.23 | ColumnsnVLanByPortStpDesignatedRoot | read-only | deprecated | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.24 | ColumnsnVLanByPortBaseBridgeAddress | read-only | deprecated | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.25 | ColumnsnVLanByPortVLanName | read-write | deprecated | VLAN Community Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.26 | ColumnsnVLanByPortRouterIntf | read-write | deprecated | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.27 | ColumnsnVLanByPortChassisPortMask | read-write | deprecated | The Chassis VLAN switch port membership. (It was obsoleted after release 07100, replaced by snVLanByPortPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.28 | ColumnsnVLanByPortPortList | read-write | deprecated | A list of port indices which are the port membership of a VLAN By Port. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2 | TablesnVLanByProtocolTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1 | RowsnVLanByProtocolEntry | not-accessible | mandatory | An entry in the VLAN By Protocol Configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.1 | ColumnsnVLanByProtocolVLanId | read-only | mandatory | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.2 | ColumnsnVLanByProtocolIndex | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.3 | ColumnsnVLanByProtocolDynamic | read-write | mandatory | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.4 | ColumnsnVLanByProtocolStaticMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.5 | ColumnsnVLanByProtocolExcludeMask | read-write | deprecated | The Standand-alone switch Protocol VLAN port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.6 | ColumnsnVLanByProtocolRouterIntf | read-write | mandatory | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.7 | ColumnsnVLanByProtocolRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.8 | ColumnsnVLanByProtocolDynamicMask | read-only | deprecated | The Standand-alone switch Protocol VLAN active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.9 | ColumnsnVLanByProtocolChassisStaticMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.10 | ColumnsnVLanByProtocolChassisExcludeMask | read-write | deprecated | The Chassis Protocol VLAN port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.11 | ColumnsnVLanByProtocolChassisDynamicMask | read-only | deprecated | The Chassis Protocol VLAN active port membership. (It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.12 | ColumnsnVLanByProtocolVLanName | read-write | mandatory | VLAN Community Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.13 | ColumnsnVLanByProtocolStaticPortList | read-write | mandatory | A list of port indices which are the configured port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the slo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.14 | ColumnsnVLanByProtocolExcludePortList | read-write | mandatory | A list of port indices which are the excluded from port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.15 | ColumnsnVLanByProtocolDynamicPortList | read-only | mandatory | A list of port indices which are dynamically joining the port membership of the Protocol VLAN. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3 | TablesnVLanByIpSubnetTable | not-accessible | mandatory | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1 | RowsnVLanByIpSubnetEntry | not-accessible | mandatory | An entry in the VLAN By IP Subnet Configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.1 | ColumnsnVLanByIpSubnetVLanId | read-only | mandatory | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.2 | ColumnsnVLanByIpSubnetIpAddress | read-only | mandatory | Subnet IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.3 | ColumnsnVLanByIpSubnetSubnetMask | read-only | mandatory | Subnet mask associated with the Subnet IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.4 | ColumnsnVLanByIpSubnetDynamic | read-write | mandatory | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.5 | ColumnsnVLanByIpSubnetStaticMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.6 | ColumnsnVLanByIpSubnetExcludeMask | read-write | deprecated | The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.7 | ColumnsnVLanByIpSubnetRouterIntf | read-write | mandatory | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.8 | ColumnsnVLanByIpSubnetRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.9 | ColumnsnVLanByIpSubnetDynamicMask | read-only | deprecated | The Standand-alone switch VLAN By Subnet active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.10 | ColumnsnVLanByIpSubnetChassisStaticMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.11 | ColumnsnVLanByIpSubnetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By Subnet port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.12 | ColumnsnVLanByIpSubnetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By Subnet active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.13 | ColumnsnVLanByIpSubnetVLanName | read-write | mandatory | VLAN Community Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.14 | ColumnsnVLanByIpSubnetStaticPortList | read-write | mandatory | A list of port indices which are the configured port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.15 | ColumnsnVLanByIpSubnetExcludePortList | read-write | mandatory | A list of port indices which are the excluded from port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.16 | ColumnsnVLanByIpSubnetDynamicPortList | read-only | mandatory | A list of port indices which are dynamically joining the port membership of the VLAN By IP Subnet. Each port index is a 16-bit integer in big endian order. 8-b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4 | TablesnVLanByIpxNetTable | not-accessible | mandatory | An entry of the VLAN By IPX Network Number Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1 | RowsnVLanByIpxNetEntry | not-accessible | mandatory | An entry in the VLAN By Ipx Network Number Configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.1 | ColumnsnVLanByIpxNetVLanId | read-only | mandatory | The VLAN ID index to both of the VLAN By Port Info Table and this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.2 | ColumnsnVLanByIpxNetNetworkNum | read-only | mandatory | IPX Network Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.3 | ColumnsnVLanByIpxNetFrameType | read-only | mandatory | The following IPX Frame types are operated in Layer3 VLAN such as : ipxEthernet8022(1), ipxEthernet8023(2), ipxEthernetII(3), ipxEthernetSnap(4). choose notApp… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.4 | ColumnsnVLanByIpxNetDynamic | read-write | mandatory | disabled(0) : disabled dynamic port inclusion - applied to switch only. enabled(1) : enabled dynamic port inclusion - applied to switch only. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.5 | ColumnsnVLanByIpxNetStaticMask | read-write | deprecated | The VLAN By IPX network port membership applied in static mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.6 | ColumnsnVLanByIpxNetExcludeMask | read-write | deprecated | The VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.7 | ColumnsnVLanByIpxNetRouterIntf | read-write | mandatory | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.8 | ColumnsnVLanByIpxNetRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.9 | ColumnsnVLanByIpxNetDynamicMask | read-only | deprecated | The VLAN By IPX network active port membership. (It was obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.10 | ColumnsnVLanByIpxNetChassisStaticMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in static mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.11 | ColumnsnVLanByIpxNetChassisExcludeMask | read-write | deprecated | The Chassis VLAN By IPX network port membership applied in exclusive mode. (It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.12 | ColumnsnVLanByIpxNetChassisDynamicMask | read-only | deprecated | The Chassis VLAN By IPX network active port membership. (It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.13 | ColumnsnVLanByIpxNetVLanName | read-write | mandatory | VLAN Community Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.14 | ColumnsnVLanByIpxNetStaticPortList | read-write | mandatory | A list of port indices which are the configured port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit is t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.15 | ColumnsnVLanByIpxNetExcludePortList | read-write | mandatory | A list of port indices which are the excluded from port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8-bit i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.16 | ColumnsnVLanByIpxNetDynamicPortList | read-only | mandatory | A list of port indices which are dynamically joining the port membership of the VLAN By IPX network. Each port index is a 16-bit integer in big endian order. 8… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5 | TablesnVLanByATCableTable | not-accessible | mandatory | A Table Of VLAN By AppleTalk Network Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1 | RowsnVLanByATCableEntry | not-accessible | mandatory | An entry of the AppleTalk Cable VLAN table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.1 | ColumnsnVLanByATCableVLanId | read-only | mandatory | The VLAN ID of a PORT VLAN of which the AppleTalk Cable VLAN was attaching to. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.2 | ColumnsnVLanByATCableIndex | read-only | mandatory | AppleTalk Cable VLAN index number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.3 | ColumnsnVLanByATCableRouterIntf | read-write | mandatory | A virtual router interface to the AppleTalk Cable VLAN, only router products accept the SNMP-SET operation. The value zero indicates that virtual router interf… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.4 | ColumnsnVLanByATCableRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.5 | ColumnsnVLanByATCableChassisStaticMask | read-write | deprecated | A list of ports which are statically configured to become port members of a VLAN. (It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortL… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.6 | ColumnsnVLanByATCableVLanName | read-write | mandatory | VLAN Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.7 | ColumnsnVLanByATCableStaticPortList | read-write | mandatory | A list of port indices which are the configured port membership of the AppleTalk Cable VLAN. Each port index is a 16-bit integer in big endian order. 8-bit is … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6 | TablesnVLanByPortMemberTable | not-accessible | mandatory | Port VLAN (Layer 2 VLAN) port membership table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1 | RowsnVLanByPortMemberEntry | not-accessible | mandatory | An entry of the port VLAN membership table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.1 | ColumnsnVLanByPortMemberVLanId | read-only | mandatory | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.2 | ColumnsnVLanByPortMemberPortId | read-only | mandatory | The ifIndex which is a member of the port VLAN. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.3 | ColumnsnVLanByPortMemberRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7 | TablesnVLanByPortCfgTable | not-accessible | mandatory | Port VLAN (Layer 2 VLAN) configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1 | RowsnVLanByPortCfgEntry | not-accessible | mandatory | An entry of the port VLAN configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.1 | ColumnsnVLanByPortCfgVLanId | read-only | mandatory | The VLAN identifier (VLAN ID). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.2 | ColumnsnVLanByPortCfgQos | read-write | mandatory | The Stand alone stackable switch VLAN Priority values are: level0(0) level1(1) The BigIron switch VLAN Priority values are: level0(0), level1(1), level2(2), le… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.3 | ColumnsnVLanByPortCfgStpMode | read-write | mandatory | Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. enabled(1)...........activate Spanning Tree disab… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.4 | ColumnsnVLanByPortCfgStpPriority | read-write | mandatory | dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.5 | ColumnsnVLanByPortCfgStpGroupMaxAge | read-write | mandatory | dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.6 | ColumnsnVLanByPortCfgStpGroupHelloTime | read-write | mandatory | dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.7 | ColumnsnVLanByPortCfgStpGroupForwardDelay | read-write | mandatory | dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.8 | ColumnsnVLanByPortCfgBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.9 | ColumnsnVLanByPortCfgBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.10 | ColumnsnVLanByPortCfgStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.11 | ColumnsnVLanByPortCfgStpMaxAge | read-only | mandatory | dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12 | ColumnsnVLanByPortCfgStpHelloTime | read-only | mandatory | dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.13 | ColumnsnVLanByPortCfgStpHoldTime | read-only | mandatory | dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be tra… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.14 | ColumnsnVLanByPortCfgStpForwardDelay | read-only | mandatory | dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning sta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.15 | ColumnsnVLanByPortCfgStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.16 | ColumnsnVLanByPortCfgStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.17 | ColumnsnVLanByPortCfgStpRootCost | read-only | mandatory | dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.18 | ColumnsnVLanByPortCfgStpRootPort | read-only | mandatory | dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.19 | ColumnsnVLanByPortCfgStpDesignatedRoot | read-only | mandatory | dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as execute… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.20 | ColumnsnVLanByPortCfgBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.21 | ColumnsnVLanByPortCfgVLanName | read-write | mandatory | VLAN Community Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.22 | ColumnsnVLanByPortCfgRouterIntf | read-write | mandatory | Optional: A virtual interface for router to the VLAN If a SNMP-Get value is zero, that means this object was not configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.23 | ColumnsnVLanByPortCfgRowStatus | read-write | mandatory | Use object to delete a vlan entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3 | NodesnSwPortInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1 | TablesnSwPortInfoTable | not-accessible | mandatory | A specific snSwPortInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1 | RowsnSwPortInfoEntry | not-accessible | mandatory | An entry in the snSwPortInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snSwPortInfoTable requires the entired sequ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.1 | ColumnsnSwPortInfoPortNum | read-only | mandatory | The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.2 | ColumnsnSwPortInfoMonitorMode | read-write | mandatory | A monitoring port is selected and its traffic will be analyzed if the mode is not disabled(0), which is the default mode. The values are: disabled(0) input(1) … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.3 | ColumnsnSwPortInfoTagMode | read-write | mandatory | For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.4 | ColumnsnSwPortInfoChnMode | read-write | mandatory | The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.5 | ColumnsnSwPortInfoSpeed | read-write | mandatory | The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.6 | ColumnsnSwPortInfoMediaType | read-only | mandatory | The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits pe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.7 | ColumnsnSwPortInfoConnectorType | read-only | mandatory | The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3).........… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.8 | ColumnsnSwPortInfoAdminStatus | read-write | mandatory | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.9 | ColumnsnSwPortInfoLinkStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.10 | ColumnsnSwPortInfoPortQos | read-write | mandatory | The Stand alone stackable switch Port Qos Priority values are: low(0) high(1) The BigIron Port Qos Priority values are: level0(0), level1(1), level2(2), level3… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.11 | ColumnsnSwPortInfoPhysAddress | read-only | mandatory | The port physical address. The physical address represents the switch port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.12 | ColumnsnSwPortStatsInFrames | read-only | mandatory | The total number of packets received on the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.13 | ColumnsnSwPortStatsOutFrames | read-only | mandatory | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.14 | ColumnsnSwPortStatsAlignErrors | read-only | mandatory | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.15 | ColumnsnSwPortStatsFCSErrors | read-only | mandatory | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.16 | ColumnsnSwPortStatsMultiColliFrames | read-only | mandatory | dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one co… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.17 | ColumnsnSwPortStatsFrameTooLongs | read-only | mandatory | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.18 | ColumnsnSwPortStatsTxColliFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.19 | ColumnsnSwPortStatsRxColliFrames | read-only | mandatory | A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.20 | ColumnsnSwPortStatsFrameTooShorts | read-only | mandatory | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21 | ColumnsnSwPortLockAddressCount | read-write | mandatory | The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.22 | ColumnsnSwPortStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.23 | ColumnsnSwPortDhcpGateListId | read-write | mandatory | The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.24 | ColumnsnSwPortName | read-write | mandatory | Port Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.25 | ColumnsnSwPortStatsInBcastFrames | read-only | mandatory | The total number of broadcast packets received on the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.26 | ColumnsnSwPortStatsOutBcastFrames | read-only | mandatory | The total number of broadcast packets transmitted out of the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.27 | ColumnsnSwPortStatsInMcastFrames | read-only | mandatory | The total number of multicast packets received on the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.28 | ColumnsnSwPortStatsOutMcastFrames | read-only | mandatory | The total number of multicast packets transmitted out of the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.29 | ColumnsnSwPortStatsInDiscard | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.30 | ColumnsnSwPortStatsOutDiscard | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.31 | ColumnsnSwPortStatsMacStations | read-only | mandatory | The total number of MAC Stations connected to the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.32 | ColumnsnSwPortCacheGroupId | read-write | mandatory | Cache Group ID for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.33 | ColumnsnSwPortTransGroupId | read-write | mandatory | Transparent Group ID for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.34 | ColumnsnSwPortInfoAutoNegotiate | read-write | mandatory | This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.35 | ColumnsnSwPortInfoFlowControl | read-write | mandatory | Enable/Disbale port flow control. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.36 | ColumnsnSwPortInfoGigType | read-only | mandatory | The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per secon… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.37 | ColumnsnSwPortStatsLinkChange | read-only | mandatory | The total number of link state change of the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.38 | ColumnsnSwPortIfIndex | read-only | mandatory | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.39 | ColumnsnSwPortDescr | read-only | mandatory | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.40 | ColumnsnSwPortInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.41 | ColumnsnSwPortOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.42 | ColumnsnSwPortStatsInBitsPerSec | read-only | mandatory | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.43 | ColumnsnSwPortStatsOutBitsPerSec | read-only | mandatory | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.44 | ColumnsnSwPortStatsInPktsPerSec | read-only | mandatory | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.45 | ColumnsnSwPortStatsOutPktsPerSec | read-only | mandatory | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.46 | ColumnsnSwPortStatsInUtilization | read-only | mandatory | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.47 | ColumnsnSwPortStatsOutUtilization | read-only | mandatory | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.48 | ColumnsnSwPortFastSpanPortEnable | read-write | mandatory | The enabled/disabled fast span port status of the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.49 | ColumnsnSwPortFastSpanUplinkEnable | read-write | mandatory | The enabled/disabled fast span uplink status of the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.50 | ColumnsnSwPortVlanId | read-write | mandatory | The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an inval… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.51 | ColumnsnSwPortRouteOnly | read-write | mandatory | Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.52 | ColumnsnSwPortPresent | read-only | mandatory | Indicate if the port is absent or present. This object only valid for M4 module |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.53 | ColumnsnSwPortGBICStatus | read-only | mandatory | Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.54 | ColumnsnSwPortStatsInKiloBitsPerSec | read-only | mandatory | Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.55 | ColumnsnSwPortStatsOutKiloBitsPerSec | read-only | mandatory | Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.56 | ColumnsnSwPortLoadInterval | read-write | mandatory | The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.57 | ColumnsnSwPortTagType | read-write | mandatory | The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet pack… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.2 | NodesnInterfaceId | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3 | TablesnInterfaceLookupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1 | RowsnInterfaceLookupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.1 | ColumnsnInterfaceLookupInterfaceId | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.2 | ColumnsnInterfaceLookupIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4 | TablesnIfIndexLookupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1 | RowsnIfIndexLookupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.1 | ColumnsnIfIndexLookupIfIndex | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.2 | ColumnsnIfIndexLookupInterfaceId | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4 | NodesnFdbInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1 | TablesnFdbTable | not-accessible | mandatory | This table contains snFdb information for each station known to the system, one entry per station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1 | RowsnFdbEntry | not-accessible | mandatory | Each entry represents the information of a static MAC station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.1 | ColumnsnFdbStationIndex | read-only | mandatory | The FDB Station index to the Fdb Station Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.2 | ColumnsnFdbStationAddr | read-write | mandatory | The snFdbs physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.3 | ColumnsnFdbStationPort | read-write | mandatory | Station slot/port number. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.4 | ColumnsnFdbVLanId | read-write | mandatory | The Station VLan ID. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.5 | ColumnsnFdbStationQos | read-write | mandatory | The Stand alone stackable station Qos Priority values are: low(0) high(1) The BigIron switch station Priority values are: level0(0), level1(1), level2(2), leve… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.6 | ColumnsnFdbStationType | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.7 | ColumnsnFdbRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5 | NodesnPortStpInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1 | TablesnPortStpTable | not-accessible | mandatory | A specific snPortStpTable consists of a number of switch ports. This table only exists if only if snVLanByPortTable exists and snVLanByPortStpMode is enabled f… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1 | RowsnPortStpEntry | not-accessible | mandatory | An entry in the snPortStpTable indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPortStpTable requires the entired sequence of… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.1 | ColumnsnPortStpVLanId | read-only | mandatory | The VLAN ID of the VLAN switch community. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.2 | ColumnsnPortStpPortNum | read-only | mandatory | The port number of the Switch. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.3 | ColumnsnPortStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.4 | ColumnsnPortStpPathCost | read-write | mandatory | dot1dStpPortPathCost : The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.5 | ColumnsnPortStpOperState | read-only | mandatory | By default, this mode is set to notActivated(0). notActivated(0)...the Port STP entry is not activated and not in running mode. activated(1)......the Port STP … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.6 | ColumnsnPortStpPortEnable | not-accessible | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.7 | ColumnsnPortStpPortForwardTransitions | not-accessible | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.8 | ColumnsnPortStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.9 | ColumnsnPortStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.10 | ColumnsnPortStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.11 | ColumnsnPortStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.12 | ColumnsnPortStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6 | NodesnTrunkInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1 | TablesnTrunkTable | not-accessible | mandatory | A specific snTrunkTable consists of a number of Trunk port-mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1 | RowsnTrunkEntry | not-accessible | mandatory | An entry in the snTrunkTable indicates the configuration on a specified Trunk port membership. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.1 | ColumnsnTrunkIndex | read-only | mandatory | The number of the trunk entries can be configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.2 | ColumnsnTrunkPortMask | read-write | mandatory | Trunk membership of the Switch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.3 | ColumnsnTrunkType | read-write | mandatory | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2 | TablesnMSTrunkTable | not-accessible | mandatory | A table contains the configuration of port members of multi-slot trunk groups. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1 | RowsnMSTrunkEntry | not-accessible | mandatory | An entry of the snMSTrunkTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.1 | ColumnsnMSTrunkPortIndex | read-only | mandatory | The primary port of a trunk group. For module with Gig ports, primary port is port 1, 3, 5, 7. For module with 10/100 ports, primary port is port 1, 5, 9, 13, … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.2 | ColumnsnMSTrunkPortList | read-write | mandatory | A list of port indices which are the port membership of a trunk group. Each port index is a 16-bit integer in big endian order. The first port index must be th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.3 | ColumnsnMSTrunkType | read-write | mandatory | The trunk connection type which specifies what device the trunk ports are connected to. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.4 | ColumnsnMSTrunkRowStatus | read-write | mandatory | To create or delete a table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.7 | NodesnSwSummary | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.7.1 | ScalarsnSwSummaryMode | read-write | mandatory | The Switch Group Configuration Summary is configured either enabled or disabled and the default is disabled mode. enabled(1)...........activate Switch Configur… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8 | NodesnDhcpGatewayListInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1 | TablesnDhcpGatewayListTable | not-accessible | mandatory | A table of DHCP gateway list of addresses. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1 | RowsnDhcpGatewayListEntry | not-accessible | mandatory | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.1 | ColumnsnDhcpGatewayListId | read-only | mandatory | The ID for a DHCP gateway list entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.2 | ColumnsnDhcpGatewayListAddrList | read-write | mandatory | The DHCP gateway address list for each DHCP gateway list ID. This list contains 1 to 8 IP addresses represented by octet string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.3 | ColumnsnDhcpGatewayListRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.9 | NodesnDnsInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.1 | ScalarsnDnsDomainName | read-write | mandatory | DNS Domain Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.2 | ScalarsnDnsGatewayIpAddrList | read-write | mandatory | The DNS Gateway IP address list. This list contains 4 IP addresses represented by octet string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10 | NodesnMacFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1 | TablesnMacFilterTable | not-accessible | mandatory | MAC filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1 | RowsnMacFilterEntry | not-accessible | mandatory | An entry in the MAC filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.1 | ColumnsnMacFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.2 | ColumnsnMacFilterAction | read-write | mandatory | Action to take if the Mac packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.3 | ColumnsnMacFilterSourceMac | read-write | mandatory | Source MAC address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.4 | ColumnsnMacFilterSourceMask | read-write | mandatory | Source MAC subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.5 | ColumnsnMacFilterDestMac | read-write | mandatory | Destination MAC address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.6 | ColumnsnMacFilterDestMask | read-write | mandatory | Destination MAC subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.7 | ColumnsnMacFilterOperator | read-write | mandatory | Type of comparison to perform. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.8 | ColumnsnMacFilterFrameType | read-write | mandatory | Frame Type: ethernet-type, LLC and SNAP types |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.9 | ColumnsnMacFilterFrameTypeNum | read-write | mandatory | Frame Type Number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.10 | ColumnsnMacFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2 | TablesnMacFilterPortAccessTable | not-accessible | mandatory | MAC Filter port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1 | RowsnMacFilterPortAccessEntry | not-accessible | mandatory | An entry in the MAC Filter Port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.1 | ColumnsnMacFilterPortAccessPortIndex | read-only | mandatory | The port index. For FastIron/NetIron products, port index value is from 1 to 42 For BigIron products, port index is an encoded number: The bit 0 to bit 7: port… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.2 | ColumnsnMacFilterPortAccessFilters | read-write | mandatory | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.3 | ColumnsnMacFilterPortAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11 | NodesnNTP | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1 | NodesnNTPGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.1 | ScalarsnNTPPollInterval | read-write | mandatory | Interval specifies how often to poll the NTP server. Each unit is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.2 | ScalarsnNTPTimeZone | read-write | mandatory | Time zone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.3 | ScalarsnNTPSummerTimeEnable | read-write | mandatory | Enable/Disable daylight saving time. This enables daylight saving time for time/date starting 02:00:00 of first Sunday in April and ending 02:00:00 of last Sun… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.4 | ScalarsnNTPSystemClock | read-write | mandatory | System clock, in the following format: octet 0: seconds after the minute [0-60] octet 1: minutes after the hour [0-59] octet 2: hours since midnight [0-23] oct… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.5 | ScalarsnNTPSync | read-write | mandatory | Initiate time synchronization to the NTP servers. For set operation, only 'synchronize(2)' is accepted. For get operation, always return 'other(1)'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2 | TablesnNTPServerTable | not-accessible | mandatory | NTP (Network Time Protocol) server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1 | RowsnNTPServerEntry | not-accessible | mandatory | An entry in the NTP server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.1 | ColumnsnNTPServerIp | read-only | mandatory | NTP server IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.2 | ColumnsnNTPServerVersion | read-write | mandatory | NTP server version. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.3 | ColumnsnNTPServerRowStatus | read-write | mandatory | To create or delete a NTP server table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12 | NodesnRadius | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1 | NodesnRadiusGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.1 | ScalarsnRadiusSNMPAccess | read-only | mandatory | Indicate whether Radius group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Radius group MIB objects return 'general error'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.2 | ScalarsnRadiusEnableTelnetAuth | read-write | mandatory | Enable/Disable telnet authentication specified by 'snRadiusLoginMethod'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.3 | ScalarsnRadiusRetransmit | read-write | mandatory | The number of authentication query retransmissions to the Radius server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.4 | ScalarsnRadiusTimeOut | read-write | mandatory | Interval specifies how long to wait for authentication reply from the Radius server, each unit is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.5 | ScalarsnRadiusDeadTime | read-write | mandatory | Interval specifies Radius server dead time, each unit is one minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.6 | ScalarsnRadiusKey | read-write | mandatory | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.7 | ScalarsnRadiusLoginMethod | read-write | mandatory | A sequence of authentication methods. Each octet represents a method to authenticate the user login process. Each octet has the following enumeration value: en… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.8 | ScalarsnRadiusEnableMethod | read-write | mandatory | A sequence of authentication methods. Each octet represents a method to authenticate the user entering priviledge mode of the command line interface. Each octe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.9 | ScalarsnRadiusWebServerMethod | read-write | mandatory | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the web-server. Each octet has the following enumeratio… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.10 | ScalarsnRadiusSNMPServerMethod | read-write | mandatory | A sequence of authentication methods. Each octet represents a method to authenticate the user accessing the snmp-server. Each octet has the following enumerati… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2 | TablesnRadiusServerTable | not-accessible | mandatory | Radius server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1 | RowsnRadiusServerEntry | not-accessible | mandatory | An entry in the Radius server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.1 | ColumnsnRadiusServerIp | read-only | mandatory | Radius server IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.2 | ColumnsnRadiusServerAuthPort | read-write | mandatory | Authentication UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.3 | ColumnsnRadiusServerAcctPort | read-write | mandatory | Account UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.4 | ColumnsnRadiusServerRowStatus | read-write | mandatory | To create or delete a Radius server table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.5 | ColumnsnRadiusServerRowKey | read-write | mandatory | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.6 | ColumnsnRadiusServerUsage | read-write | mandatory | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13 | NodesnTacacs | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1 | NodesnTacacsGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.1 | ScalarsnTacacsRetransmit | read-write | mandatory | The number of authentication query retransmissions to the Tacacs server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.2 | ScalarsnTacacsTimeOut | read-write | mandatory | Interval specifies how long to wait for authentication reply from the Tacacs server, each unit is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.3 | ScalarsnTacacsDeadTime | read-write | mandatory | Interval specifies Tacacs server dead time, each unit is one minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.4 | ScalarsnTacacsKey | read-write | mandatory | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.5 | ScalarsnTacacsSNMPAccess | read-only | mandatory | Indicate whether Tacacs group MIB obejcts can be accessed by SNMP manager. If value is disabled, all Tacacs group MIB objects return 'general error'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2 | TablesnTacacsServerTable | not-accessible | mandatory | Tacacs server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1 | RowsnTacacsServerEntry | not-accessible | mandatory | An entry in the Tacacs server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.1 | ColumnsnTacacsServerIp | read-only | mandatory | Tacacs server IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.2 | ColumnsnTacacsServerAuthPort | read-write | mandatory | Authentication UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.3 | ColumnsnTacacsServerRowStatus | read-write | mandatory | To create or delete a Tacacs server table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.4 | ColumnsnTacacsServerRowKey | read-write | mandatory | Authentication key displayed as encrypted text. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.5 | ColumnsnTacacsServerUsage | read-write | mandatory | To allow this server to be dedicated for a particular AAA activity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14 | NodesnQos | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1 | TablesnQosProfileTable | not-accessible | mandatory | A table contains the configuration of qos profile groups. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1 | RowsnQosProfileEntry | not-accessible | mandatory | An entry of the snQosProfileTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.1 | ColumnsnQosProfileIndex | read-only | mandatory | The table index of QOS Profile. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.2 | ColumnsnQosProfileName | read-write | mandatory | Qos Profile Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.3 | ColumnsnQosProfileRequestedBandwidth | read-write | mandatory | Qos Profile Requested Bandwidth. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.4 | ColumnsnQosProfileCalculatedBandwidth | read-only | mandatory | Qos Profile Calculated Bandwidth. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2 | TablesnQosBindTable | not-accessible | mandatory | A table contains the configuration of 802.1p to qos profile binding groups. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1 | RowsnQosBindEntry | not-accessible | mandatory | An entry of the snQosBindTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.1 | ColumnsnQosBindIndex | read-only | mandatory | The table index of QOS Bind. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.2 | ColumnsnQosBindPriority | read-only | mandatory | QOS bind priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.3 | ColumnsnQosBindProfileIndex | read-write | mandatory | QOS Bind Profile Index. This is pointer to the index of snQosProfile Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15 | NodesnAAA | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.1 | NodesnAuthentication | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2 | NodesnAuthorization | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.1 | ScalarsnAuthorizationCommandMethods | read-write | mandatory | A sequence of authorization methods. Each octet represents a method to authorize the user command. Each octet has the following value: radius(2) - authorize by… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.2 | ScalarsnAuthorizationCommandLevel | read-write | mandatory | Commands, which are equal to and less than the specified command level here needs to be authorized. Possible enumeration values: 0 - Privilege level 0 4 - Priv… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.3 | ScalarsnAuthorizationExec | read-write | mandatory | A sequence of exec authorization methods. Each octet represents a method for telnet or SSH login authorization. Each octet has the following enumeration value:… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3 | NodesnAccounting | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.1 | ScalarsnAccountingCommandMethods | read-write | mandatory | A sequence of accounting methods. Each octet represents a method to account for the user command. Each octet has the following enumeration value: radius(2) - s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.2 | ScalarsnAccountingCommandLevel | read-write | mandatory | Commands, which are equal to and less than the specified command level here will be accounted. Possible enumeration values: level0 - Privilege level 0 level4 -… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.3 | ScalarsnAccountingExec | read-write | mandatory | A sequence of accounting methods. Each octet represents a method for telnet or SSH login accounting. Each octet has the following enumeration value: radius(2) … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.4 | ScalarsnAccountingSystem | read-write | mandatory | A sequence of accounting methods. Each octet represents a method to account for the system related events. Each octet has the following enumeration value: radi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16 | NodesnCAR | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1 | NodesnPortCARs | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1 | TablesnPortCARTable | not-accessible | mandatory | A table of rate limit configuration entries. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied to packets … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1 | RowsnPortCAREntry | not-accessible | mandatory | A collection of rate-limit configuration objects on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.1 | ColumnsnPortCARifIndex | read-only | mandatory | The ifIndex value for this rate limit entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.2 | ColumnsnPortCARDirection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.3 | ColumnsnPortCARRowIndex | read-only | mandatory | The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.4 | ColumnsnPortCARType | read-only | mandatory | The type of traffic rate-limited against. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.5 | ColumnsnPortCARAccIdx | read-only | mandatory | The index to the access list if RateLimitType is either quickAcc or standardAcc. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.6 | ColumnsnPortCARRate | read-only | mandatory | The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.7 | ColumnsnPortCARLimit | read-only | mandatory | This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.8 | ColumnsnPortCARExtLimit | read-only | mandatory | This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.9 | ColumnsnPortCARConformAction | read-only | mandatory | Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.10 | ColumnsnPortCARExceedAction | read-only | mandatory | Action to be taken when the traffic exceeds the Rate Limit.drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rate… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.11 | ColumnsnPortCARStatSwitchedPkts | read-only | mandatory | The counter of packets permitted by this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.12 | ColumnsnPortCARStatSwitchedBytes | read-only | mandatory | The counter of bytes permitted by this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.13 | ColumnsnPortCARStatFilteredPkts | read-only | mandatory | The counter of packets which exceeded this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.14 | ColumnsnPortCARStatFilteredBytes | read-only | mandatory | The counter of bytes which exceeded this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.15 | ColumnsnPortCARStatCurBurst | read-only | mandatory | The current received burst size. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17 | NodesnVLanCAR | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1 | NodesnVLanCARs | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1 | TablesnVLanCARTable | not-accessible | mandatory | A table of rate limit configuration entries for a vlan. Rate Limit is a method of traffic control. It allows a set of rate limits to be configured and applied … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1 | RowsnVLanCAREntry | not-accessible | mandatory | A collection of rate-limit configuration objects on this vlan. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.1 | ColumnsnVLanCARVLanId | read-only | mandatory | The VLAN ID as one of the indices of this table . Each VLAN ID can have a membership of multiple ports. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.2 | ColumnsnVLanCARDirection | read-only | mandatory | The input or output transmission direction for the Rate Limit object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.3 | ColumnsnVLanCARRowIndex | read-only | mandatory | The table index for rate limit objects. It increases as the rate limit entries are added. Skips the number when a row is deleted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.4 | ColumnsnVLanCARType | read-only | mandatory | The type of traffic rate-limited against. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.5 | ColumnsnVLanCARAccIdx | read-only | mandatory | The index to the access list if RateLimitType is either quickAcc or standardAcc. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.6 | ColumnsnVLanCARRate | read-only | mandatory | The comitted access rate. This determines the long term average transmission rate. Traffic that falls under this rate always conforms. This is average rate in … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.7 | ColumnsnVLanCARLimit | read-only | mandatory | This is the normal burst size that determines how large traffic bursts can be before some traffic exceeds the rate limit. This specifies the number of bytes th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.8 | ColumnsnVLanCARExtLimit | read-only | mandatory | This is the extended burst limit that determines how large traffic bursts can be before all the traffic exceeds the rate limit. This burst size is in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.9 | ColumnsnVLanCARConformAction | read-only | mandatory | Action to be taken when the traffic is within the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.10 | ColumnsnVLanCARExceedAction | read-only | mandatory | Action to be taken when the traffic exceeds the Rate Limit. drop drop the packet. xmit transmit the packet. continue continue to evaluate to the subsequent rat… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.11 | ColumnsnVLanCARStatSwitchedPkts | read-only | mandatory | The counter of packets permitted by this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.12 | ColumnsnVLanCARStatSwitchedBytes | read-only | mandatory | The counter of bytes permitted by this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.13 | ColumnsnVLanCARStatFilteredPkts | read-only | mandatory | The counter of packets which exceeded this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.14 | ColumnsnVLanCARStatFilteredBytes | read-only | mandatory | The counter of bytes which exceeded this rate limit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.15 | ColumnsnVLanCARStatCurBurst | read-only | mandatory | The current received burst size. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18 | NodesnNetFlow | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1 | NodesnNetFlowGlb | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.1 | ScalarsnNetFlowGblEnable | read-write | mandatory | Enable/disable NetFlow export operation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.2 | ScalarsnNetFlowGblVersion | read-write | mandatory | NetFlow export version. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.3 | ScalarsnNetFlowGblProtocolDisable | read-write | mandatory | bit 0 - other, disable all protocols export except UDP and TCP bit 1 - tcp, disable TCP protocol export bit 2 - udp, disable UDP protocol export |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.4 | ScalarsnNetFlowGblActiveTimeout | read-write | mandatory | Maximum time an active flow can be in the NetFlow cache (minutes: 1..60) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.5 | ScalarsnNetFlowGblInactiveTimeout | read-write | mandatory | Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2 | TablesnNetFlowCollectorTable | not-accessible | mandatory | A table of each NetFlow collector information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1 | RowsnNetFlowCollectorEntry | not-accessible | mandatory | A row in the NetFlow collector table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.1 | ColumnsnNetFlowCollectorIndex | read-only | mandatory | The index to the NetFlow collector table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.2 | ColumnsnNetFlowCollectorIp | read-write | mandatory | The NetFlow collector ip address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.3 | ColumnsnNetFlowCollectorUdpPort | read-write | mandatory | The NetFlow collector UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.4 | ColumnsnNetFlowCollectorSourceInterface | read-write | mandatory | The ifIndex value to specify source port to export NetFlow packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.5 | ColumnsnNetFlowCollectorRowStatus | read-write | mandatory | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3 | TablesnNetFlowAggregationTable | not-accessible | mandatory | A table of each NetFlow aggregation scheme information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1 | RowsnNetFlowAggregationEntry | not-accessible | mandatory | A row in the NetFlow Aggregation table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.1 | ColumnsnNetFlowAggregationIndex | read-only | mandatory | The Aggregation scheme ID |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.2 | ColumnsnNetFlowAggregationIp | read-write | mandatory | The NetFlow aggregation collector ip address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.3 | ColumnsnNetFlowAggregationUdpPort | read-write | mandatory | The NetFlow aggregation collector UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.4 | ColumnsnNetFlowAggregationSourceInterface | read-write | mandatory | The ifIndex value to specify source port to export NetFlow aggregation packet. Value 0 to indicate default outgoing port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.5 | ColumnsnNetFlowAggregationNumberOfCacheEntries | read-write | mandatory | Number of cache entries for aggregation scheme |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.6 | ColumnsnNetFlowAggregationActiveTimeout | read-write | mandatory | Maximum time an active flow can be in the aggregation cache |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.7 | ColumnsnNetFlowAggregationInactiveTimeout | read-write | mandatory | Maximum time an inactive flow can be in the aggregation cache |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.8 | ColumnsnNetFlowAggregationEnable | read-write | mandatory | Enable/disable NetFlow aggregation for this aggregation scheme. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.9 | ColumnsnNetFlowAggregationRowStatus | read-write | mandatory | To create or delete a NetFlow collector table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4 | TablesnNetFlowIfTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1 | RowsnNetFlowIfEntry | not-accessible | mandatory | Entry containing the type of switching performed on that interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.1 | ColumnsnNetFlowIfIndex | read-only | mandatory | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.2 | ColumnsnNetFlowIfFlowSwitching | read-write | mandatory | To enable/disable flow switching in a particular interface: disable (0) - no flow switching enable (1) - flow switching |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19 | NodesnSFlow | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.1 | NodesnSFlowGlb | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2 | TablesnSflowCollectorTable | not-accessible | mandatory | Table of all but first sFlow collectors. The first collector can be configured using sFlowTable in RFC 3176. The RFC cannot be used to configure more than one … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1 | RowsnSflowCollectorEntry | not-accessible | mandatory | A row in the sFlow collector table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.1 | ColumnsnSflowCollectorIndex | read-only | mandatory | The index to the sFlow collector table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.2 | ColumnsnSflowCollectorIP | read-write | mandatory | The sFlow collector ip address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.3 | ColumnsnSflowCollectorUDPPort | read-write | mandatory | The sFlow collector UDP port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.4 | ColumnsnSflowCollectorRowStatus | read-write | mandatory | To create, update or delete a SFlow collector table entry. If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20 | NodesnFDP | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1 | NodesnFdpMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1 | NodesnFdpInterface | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1 | TablesnFdpInterfaceTable | not-accessible | mandatory | Status of FDP on the device's interfaces. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1 | RowsnFdpInterfaceEntry | not-accessible | mandatory | An entry in the snFdpInterfaceTable, having the status of FDP on an interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.1 | ColumnsnFdpInterfaceIfIndex | not-accessible | mandatory | ifIndex value of the local interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.2 | ColumnsnFdpInterfaceFdpEnable | read-write | mandatory | The flag, whether the Foundry Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.3 | ColumnsnFdpInterfaceCdpEnable | read-write | mandatory | The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2 | NodesnFdpCache | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1 | TablesnFdpCacheTable | not-accessible | mandatory | The table for the cached information obtained via receiving FDP/CDP messages. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1 | RowsnFdpCacheEntry | not-accessible | mandatory | An entry in the snFdpCacheTable, having the information received via FDP/CDP on one interface from one device. Entries appear when a FDP/CDP advertisement is r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.1 | ColumnsnFdpCacheIfIndex | not-accessible | mandatory | ifIndex value of the local interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.2 | ColumnsnFdpCacheDeviceIndex | not-accessible | mandatory | Identification of a device, which sent FDP/CDP messages |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.3 | ColumnsnFdpCacheDeviceId | read-only | mandatory | The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.4 | ColumnsnFdpCacheAddressType | read-only | mandatory | An indication of the type of address contained in the corresponding instance of snFdpCacheAddress. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.5 | ColumnsnFdpCacheAddress | read-only | mandatory | The (first) network-layer address of the device as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX address… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.6 | ColumnsnFdpCacheVersion | read-only | mandatory | Version string as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.7 | ColumnsnFdpCacheDevicePort | read-only | mandatory | The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length str… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.8 | ColumnsnFdpCachePlatform | read-only | mandatory | The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.9 | ColumnsnFdpCacheCapabilities | read-only | mandatory | The Device's Functional Capabilities as reported in the most recent FDP/CDP message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.10 | ColumnsnFdpCacheVendorId | read-only | mandatory | Indicates the entry received by either FDP or CDP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.11 | ColumnsnFdpCacheIsAggregateVlan | read-only | mandatory | Neighbor device is in aggregated-vlan. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.12 | ColumnsnFdpCacheTagType | read-only | mandatory | Neighbor device tag-type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.13 | ColumnsnFdpCachePortVlanMask | read-only | mandatory | Neighbor device port VLAN masks in 512-byte octet string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.14 | ColumnsnFdpCachePortTagMode | read-only | mandatory | Neighbor device port tag mode |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.15 | ColumnsnFdpCacheDefaultTrafficeVlanIdForDualMode | read-only | mandatory | Default traffic vlan id for neighbor device dual-mode port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3 | NodesnFdpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.1 | ScalarsnFdpGlobalRun | read-write | mandatory | The flag, whether the Foundry Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.2 | ScalarsnFdpGlobalMessageInterval | read-write | mandatory | The interval at which FDP messages are to be generated. The default value is 60 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.3 | ScalarsnFdpGlobalHoldTime | read-write | mandatory | The time for the receiving device holds FDP message. The default value is 180 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.4 | ScalarsnFdpGlobalCdpRun | read-write | mandatory | An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4 | NodesnFdpCachedAddr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1 | TablesnFdpCachedAddressTable | not-accessible | mandatory | Cached address table from receiving FDP/CDP messages. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1 | RowsnFdpCachedAddressEntry | not-accessible | mandatory | An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.1 | ColumnsnFdpCachedAddrIfIndex | not-accessible | mandatory | The ifIndex value of the local interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.2 | ColumnsnFdpCachedAddrDeviceIndex | not-accessible | mandatory | A unique vlaue for each device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.3 | ColumnsnFdpCachedAddrDeviceAddrEntryIndex | not-accessible | mandatory | A unique vlaue for address entry in device from which FDP/CDP messages are being received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.4 | ColumnsnFdpCachedAddrType | read-only | mandatory | An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.5 | ColumnsnFdpCachedAddrValue | read-only | mandatory | The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message in the following format: IP address: 4 octets, ip(1) IPX addr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21 | NodesnVsrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1 | NodesnVsrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1 | ScalarsnVsrpGroupOperModeVsrp | read-write | mandatory | The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2 | ScalarsnVsrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3 | ScalarsnVsrpIfMaxNumVridPerIntf | read-only | mandatory | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4 | ScalarsnVsrpIfMaxNumVridPerSystem | read-only | mandatory | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5 | ScalarsnVsrpClearVrrpStat | read-write | mandatory | Clear VSRP statistics command. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2 | NodesnVsrpIfIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1 | TablesnVsrpIfTable | not-accessible | mandatory | The VSRP Interface Table describes the interfaces from the viewpoint of VSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1 | RowsnVsrpIfEntry | not-accessible | mandatory | The VSRP Interface Entry describes one interface from the viewpoint of VSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1 | ColumnsnVsrpIfVlanId | read-only | mandatory | Vlan index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2 | ColumnsnVsrpIfAuthType | read-write | mandatory | The authentication type of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3 | ColumnsnVsrpIfAuthPassword | read-write | mandatory | The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3 | NodesnVsrpVirRtr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 | TablesnVsrpVirRtrTable | not-accessible | mandatory | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 | RowsnVsrpVirRtrEntry | not-accessible | mandatory | The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1 | ColumnsnVsrpVirRtrVlanId | read-only | mandatory | Vlan index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2 | ColumnsnVsrpVirRtrId | read-only | mandatory | One of the virtual router ID of this vsrp interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3 | ColumnsnVsrpVirRtrOwnership | read-write | mandatory | The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp ro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4 | ColumnsnVsrpVirRtrCfgPriority | read-write | mandatory | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5 | ColumnsnVsrpVirRtrTrackPriority | read-write | mandatory | The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6 | ColumnsnVsrpVirRtrCurrPriority | read-only | mandatory | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7 | ColumnsnVsrpVirRtrHelloInt | read-write | mandatory | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8 | ColumnsnVsrpVirRtrDeadInt | read-write | mandatory | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9 | ColumnsnVsrpVirRtrPreemptMode | read-write | mandatory | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10 | ColumnsnVsrpVirRtrState | read-only | mandatory | This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11 | ColumnsnVsrpVirRtrIpAddrMask | read-write | mandatory | The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12 | ColumnsnVsrpVirRtrActivate | read-write | mandatory | This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 | ColumnsnVsrpVirRtrTrackPortList | read-write | mandatory | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14 | ColumnsnVsrpVirRtrAdvertiseBackup | read-write | mandatory | Set Advertise this backup router to master |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15 | ColumnsnVsrpVirRtrHoldDownInt | read-write | mandatory | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16 | ColumnsnVsrpVirRtrInitTtl | read-write | mandatory | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17 | ColumnsnVsrpVirRtrIncPortList | read-write | mandatory | Include all free ports of the VLAN into its control ports |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18 | ColumnsnVsrpVirRtrSave | read-write | mandatory | Set VSRP to save current parameters value |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19 | ColumnsnVsrpVirRtrBackupInt | read-write | mandatory | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20 | ColumnsnVsrpVirRtrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21 | ColumnsnVsrpVirRtrRxArpPktDropCnts | read-only | mandatory | The received vsrp ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22 | ColumnsnVsrpVirRtrRxIpPktDropCnts | read-only | mandatory | The received VSRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23 | ColumnsnVsrpVirRtrRxPortMismatchCnts | read-only | mandatory | The received vsrp Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24 | ColumnsnVsrpVirRtrRxNumOfIpMismatchCnts | read-only | mandatory | The received VSRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25 | ColumnsnVsrpVirRtrRxIpMismatchCnts | read-only | mandatory | The received vsrp IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26 | ColumnsnVsrpVirRtrRxHelloIntMismatchCnts | read-only | mandatory | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27 | ColumnsnVsrpVirRtrRxPriorityZeroFromMasterCnts | read-only | mandatory | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28 | ColumnsnVsrpVirRtrRxHigherPriorityCnts | read-only | mandatory | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29 | ColumnsnVsrpVirRtrTransToMasterStateCnts | read-only | mandatory | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30 | ColumnsnVsrpVirRtrTransToBackupStateCnts | read-only | mandatory | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31 | ColumnsnVsrpVirRtrCurrDeadInt | read-only | mandatory | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32 | ColumnsnVsrpVirRtrCurHelloInt | read-only | mandatory | Set backup router hello interval |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33 | ColumnsnVsrpVirRtrCurHoldDownInt | read-only | mandatory | VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34 | ColumnsnVsrpVirRtrCurInitTtl | read-only | mandatory | VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35 | ColumnsnVsrpVirRtrHelloMacAddress | read-only | mandatory | Hello MAC address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36 | ColumnsnVsrpVirRtrMasterIpAddr | read-only | mandatory | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4 | NodesnL4 | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1 | NodesnL4Gen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.1 | ScalarsnL4MaxSessionLimit | read-write | mandatory | numbers of maximum session (L4 cache) entries |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.2 | ScalarsnL4TcpSynLimit | read-write | mandatory | Numbers of connection per second |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.3 | ScalarsnL4slbGlobalSDAType | read-write | mandatory | Global Session Distribution Algorithm(SDA) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.4 | ScalarsnL4slbTotalConnections | read-only | mandatory | Total connections in this device |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.5 | ScalarsnL4slbLimitExceeds | read-only | mandatory | exceeds snL4TCPSynLimit (numbers of connection per second) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.6 | ScalarsnL4slbForwardTraffic | read-only | mandatory | Client->Server |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.7 | ScalarsnL4slbReverseTraffic | read-only | mandatory | Server->Client |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.8 | ScalarsnL4slbDrops | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.9 | ScalarsnL4slbDangling | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.10 | ScalarsnL4slbDisableCount | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.11 | ScalarsnL4slbAged | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.12 | ScalarsnL4slbFinished | read-only | mandatory | FIN_or_RST |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.13 | ScalarsnL4FreeSessionCount | read-only | mandatory | Maximum sessions - used sessions |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.14 | ScalarsnL4BackupInterface | read-write | mandatory | backup monitoring port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.15 | ScalarsnL4BackupMacAddr | read-write | mandatory | Associated MAC address for backup monitoring port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.16 | ScalarsnL4Active | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.17 | ScalarsnL4Redundancy | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.18 | ScalarsnL4Backup | read-only | mandatory | true->StandBy,false->active |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.19 | ScalarsnL4BecomeActive | read-only | mandatory | How many times this device become active |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.20 | ScalarsnL4BecomeStandBy | read-only | mandatory | How many times this device become standby |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.21 | ScalarsnL4BackupState | read-only | mandatory | Backup state |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.22 | ScalarsnL4NoPDUSent | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.23 | ScalarsnL4NoPDUCount | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.24 | ScalarsnL4NoPortMap | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.25 | ScalarsnL4unsuccessfulConn | read-only | mandatory | Unsuccessfull connection |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.26 | ScalarsnL4PingInterval | read-write | mandatory | Ping retries interval |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.27 | ScalarsnL4PingRetry | read-write | mandatory | Ping retries attempts |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.28 | ScalarsnL4TcpAge | read-write | mandatory | TCP reset age |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.29 | ScalarsnL4UdpAge | read-write | mandatory | UDP reset age |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.30 | ScalarsnL4EnableMaxSessionLimitReachedTrap | read-write | mandatory | Enable/disable maximum number of connections reached trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.31 | ScalarsnL4EnableTcpSynLimitReachedTrap | read-write | mandatory | Enable/disable the number of TCP SYN limits reached trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.32 | ScalarsnL4EnableRealServerUpTrap | read-write | mandatory | Enable/disable the real server up trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.33 | ScalarsnL4EnableRealServerDownTrap | read-write | mandatory | Enable/disable the real server down trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.34 | ScalarsnL4EnableRealServerPortUpTrap | read-write | mandatory | Enable/disable the real server TCP port up trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.35 | ScalarsnL4EnableRealServerPortDownTrap | read-write | mandatory | Enable/disable the real server TCP port down trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.36 | ScalarsnL4EnableRealServerMaxConnLimitReachedTrap | read-write | mandatory | Enable/disable the real server maximum number of connections reached trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.37 | ScalarsnL4EnableBecomeStandbyTrap | read-write | mandatory | Enable/disable trap of the server load balancing switch changes state from active to standby. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.38 | ScalarsnL4EnableBecomeActiveTrap | read-write | mandatory | Enable/disable trap of the server load balancing switch changes state from standby to active. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.39 | ScalarsnL4slbRouterInterfacePortMask | read-write | deprecated | Router interface port mask. (It was obsoleted after release 07100, replaced by snL4slbRouterInterfacePortList) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.40 | ScalarsnL4MaxNumWebCacheGroup | read-only | mandatory | The maximum number of server cache groups |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.41 | ScalarsnL4MaxNumWebCachePerGroup | read-only | mandatory | The maximum number of WEB Cache servers in each of web cache group |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.42 | ScalarsnL4WebCacheStateful | read-write | mandatory | The WEB Cache servers cache-stateful |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.43 | ScalarsnL4EnableGslbHealthCheckIpUpTrap | read-write | mandatory | Health check IP up. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.44 | ScalarsnL4EnableGslbHealthCheckIpDownTrap | read-write | mandatory | Health check IP down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.45 | ScalarsnL4EnableGslbHealthCheckIpPortUpTrap | read-write | mandatory | Health check IP port up. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.46 | ScalarsnL4EnableGslbHealthCheckIpPortDownTrap | read-write | mandatory | Health check IP port down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.47 | ScalarsnL4EnableGslbRemoteGslbSiDownTrap | read-write | mandatory | Connection to GSLB ServerIron is down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.48 | ScalarsnL4EnableGslbRemoteGslbSiUpTrap | read-write | mandatory | Connection to GSLB ServerIron is up. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.49 | ScalarsnL4EnableGslbRemoteSiDownTrap | read-write | mandatory | GSLB connection to remote ServerIron is down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.50 | ScalarsnL4EnableGslbRemoteSiUpTrap | read-write | mandatory | GSLB connection to remote ServerIron is up. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.51 | ScalarsnL4slbRouterInterfacePortList | read-write | mandatory | Router interface port list. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2 | NodesnL4VirtualServer | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1 | TablesnL4VirtualServerTable | not-accessible | mandatory | Virtual Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1 | RowsnL4VirtualServerEntry | not-accessible | mandatory | An entry in L4 Virtual Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.1 | ColumnsnL4VirtualServerIndex | read-only | mandatory | The table index for a Virtual Server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.2 | ColumnsnL4VirtualServerName | read-write | mandatory | Virtual server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.3 | ColumnsnL4VirtualServerVirtualIP | read-write | mandatory | Virtual Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.4 | ColumnsnL4VirtualServerAdminStatus | read-write | mandatory | Virtual Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.5 | ColumnsnL4VirtualServerSDAType | read-write | mandatory | TCP/UDP Sessions Distribution Algorithms Type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.6 | ColumnsnL4VirtualServerRowStatus | read-write | mandatory | To create or delete a virtual server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.7 | ColumnsnL4VirtualServerDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3 | NodesnL4RealServer | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1 | TablesnL4RealServerTable | not-accessible | mandatory | Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1 | RowsnL4RealServerEntry | not-accessible | mandatory | An entry in the Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.1 | ColumnsnL4RealServerIndex | read-only | mandatory | The table index for a Real Server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.2 | ColumnsnL4RealServerName | read-write | mandatory | Real server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.3 | ColumnsnL4RealServerIP | read-write | mandatory | Real Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.4 | ColumnsnL4RealServerAdminStatus | read-write | mandatory | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.5 | ColumnsnL4RealServerMaxConnections | read-write | mandatory | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.6 | ColumnsnL4RealServerWeight | read-write | mandatory | Real Server weight |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.7 | ColumnsnL4RealServerRowStatus | read-write | mandatory | To create or delete a real server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.8 | ColumnsnL4RealServerDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4 | NodesnL4VirtualServerPort | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1 | TablesnL4VirtualServerPortTable | not-accessible | mandatory | Virtual Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1 | RowsnL4VirtualServerPortEntry | not-accessible | mandatory | An entry in the Virtual Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.1 | ColumnsnL4VirtualServerPortIndex | read-only | mandatory | The index for Virtual Server Port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.2 | ColumnsnL4VirtualServerPortServerName | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.3 | ColumnsnL4VirtualServerPortPort | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.4 | ColumnsnL4VirtualServerPortAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.5 | ColumnsnL4VirtualServerPortSticky | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.6 | ColumnsnL4VirtualServerPortConcurrent | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.7 | ColumnsnL4VirtualServerPortRowStatus | read-write | mandatory | To create or delete a virtual server port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.8 | ColumnsnL4VirtualServerPortDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5 | NodesnL4RealServerPort | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1 | TablesnL4RealServerPortTable | not-accessible | mandatory | Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1 | RowsnL4RealServerPortEntry | not-accessible | mandatory | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.1 | ColumnsnL4RealServerPortIndex | read-only | mandatory | The index for Real Server Port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.2 | ColumnsnL4RealServerPortServerName | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.3 | ColumnsnL4RealServerPortPort | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.4 | ColumnsnL4RealServerPortAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.5 | ColumnsnL4RealServerPortRowStatus | read-write | mandatory | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.6 | ColumnsnL4RealServerPortDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6 | NodesnL4Bind | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1 | TablesnL4BindTable | not-accessible | mandatory | Bind table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1 | RowsnL4BindEntry | not-accessible | mandatory | An entry in the Bind table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.1 | ColumnsnL4BindIndex | read-only | mandatory | The index for Bind entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.2 | ColumnsnL4BindVirtualServerName | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.3 | ColumnsnL4BindVirtualPortNumber | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.4 | ColumnsnL4BindRealServerName | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.5 | ColumnsnL4BindRealPortNumber | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.6 | ColumnsnL4BindRowStatus | read-write | mandatory | To create or delete bind entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7 | NodesnL4VirtualServerStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1 | TablesnL4VirtualServerStatusTable | not-accessible | mandatory | Virtual Server Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1 | RowsnL4VirtualServerStatusEntry | not-accessible | mandatory | An entry in L4 Virtual Server Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.1 | ColumnsnL4VirtualServerStatusIndex | read-only | mandatory | The table index for a Virtual Server Status entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.2 | ColumnsnL4VirtualServerStatusName | read-only | mandatory | Virtual server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.3 | ColumnsnL4VirtualServerStatusReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.4 | ColumnsnL4VirtualServerStatusTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.5 | ColumnsnL4VirtualServerStatusTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8 | NodesnL4RealServerStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1 | TablesnL4RealServerStatusTable | not-accessible | mandatory | Real Server Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1 | RowsnL4RealServerStatusEntry | not-accessible | mandatory | An entry in the Real Server Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.1 | ColumnsnL4RealServerStatusIndex | read-only | mandatory | The table index for a Real Server Status entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.2 | ColumnsnL4RealServerStatusName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.3 | ColumnsnL4RealServerStatusRealIP | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.4 | ColumnsnL4RealServerStatusReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.5 | ColumnsnL4RealServerStatusTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.6 | ColumnsnL4RealServerStatusCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.7 | ColumnsnL4RealServerStatusTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.8 | ColumnsnL4RealServerStatusAge | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.9 | ColumnsnL4RealServerStatusState | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.10 | ColumnsnL4RealServerStatusReassignments | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.11 | ColumnsnL4RealServerStatusReassignmentLimit | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.12 | ColumnsnL4RealServerStatusFailedPortExists | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.13 | ColumnsnL4RealServerStatusFailTime | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.14 | ColumnsnL4RealServerStatusPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9 | NodesnL4VirtualServerPortStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1 | TablesnL4VirtualServerPortStatusTable | not-accessible | mandatory | Virtual Server Port Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1 | RowsnL4VirtualServerPortStatusEntry | not-accessible | mandatory | An entry in the Virtual Server Port Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.1 | ColumnsnL4VirtualServerPortStatusIndex | read-only | mandatory | The index for Virtual Server Port Status entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.2 | ColumnsnL4VirtualServerPortStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.3 | ColumnsnL4VirtualServerPortStatusServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.4 | ColumnsnL4VirtualServerPortStatusCurrentConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.5 | ColumnsnL4VirtualServerPortStatusTotalConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.6 | ColumnsnL4VirtualServerPortStatusPeakConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10 | NodesnL4RealServerPortStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1 | TablesnL4RealServerPortStatusTable | not-accessible | mandatory | Real Server Port Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1 | RowsnL4RealServerPortStatusEntry | not-accessible | mandatory | An entry in the Real Server Port Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.1 | ColumnsnL4RealServerPortStatusIndex | read-only | mandatory | The index for Real Server Port Status entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.2 | ColumnsnL4RealServerPortStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.3 | ColumnsnL4RealServerPortStatusServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.4 | ColumnsnL4RealServerPortStatusReassignCount | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.5 | ColumnsnL4RealServerPortStatusState | read-only | mandatory | Real server port state |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.6 | ColumnsnL4RealServerPortStatusFailTime | read-only | mandatory | Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.7 | ColumnsnL4RealServerPortStatusCurrentConnection | read-only | mandatory | Real server port current connection |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.8 | ColumnsnL4RealServerPortStatusTotalConnection | read-only | mandatory | Real server port total connection |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.9 | ColumnsnL4RealServerPortStatusRxPkts | read-only | mandatory | Real server port receive packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.10 | ColumnsnL4RealServerPortStatusTxPkts | read-only | mandatory | Real server port transmit packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.11 | ColumnsnL4RealServerPortStatusRxBytes | read-only | mandatory | Real server port receive bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.12 | ColumnsnL4RealServerPortStatusTxBytes | read-only | mandatory | Real server port transmit bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.13 | ColumnsnL4RealServerPortStatusPeakConnection | read-only | mandatory | peak connection for real server port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11 | NodesnL4Policy | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1 | TablesnL4PolicyTable | not-accessible | mandatory | L4 policy table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1 | RowsnL4PolicyEntry | not-accessible | mandatory | An entry of the L4 policy table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.1 | ColumnsnL4PolicyId | read-only | mandatory | The ID to identify a entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.2 | ColumnsnL4PolicyPriority | read-write | mandatory | The Stand alone stackable switch L4 Policy Priority values are: normal(0) high(1) cache(2) transparent(3) The BigIron switch L4 Priority values are: level0(0),… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.3 | ColumnsnL4PolicyScope | read-write | mandatory | Scope of the local or global. Global automatic apply to all port. Local apply to a port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.4 | ColumnsnL4PolicyProtocol | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.5 | ColumnsnL4PolicyPort | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.6 | ColumnsnL4PolicyRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12 | NodesnL4PolicyPortAccess | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1 | TablesnL4PolicyPortAccessTable | not-accessible | mandatory | ip interface L4 policy access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1 | RowsnL4PolicyPortAccessEntry | not-accessible | mandatory | An entry of the ip interface L4 policy access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.1 | ColumnsnL4PolicyPortAccessPort | read-only | mandatory | The ip interface to which the L4 policy applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.2 | ColumnsnL4PolicyPortAccessList | read-write | mandatory | An ip L4 policy list, of which each octet contains a ID number that forms a group of s. A valid entry in the snL4PolicyTable with the corresponding ID number (… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.3 | ColumnsnL4PolicyPortAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.13 | NodesnL4Trap | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.1 | ScalarsnL4TrapRealServerIP | not-accessible | mandatory | Real server IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.2 | ScalarsnL4TrapRealServerName | not-accessible | mandatory | Real server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.3 | ScalarsnL4TrapRealServerPort | not-accessible | mandatory | Transport protocol port number of the real server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.4 | ScalarsnL4TrapRealServerCurConnections | not-accessible | mandatory | Real Server current connections. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14 | NodesnL4WebCache | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1 | TablesnL4WebCacheTable | not-accessible | mandatory | Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1 | RowsnL4WebCacheEntry | not-accessible | mandatory | An entry in the Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.1 | ColumnsnL4WebCacheIP | read-only | mandatory | Real Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.2 | ColumnsnL4WebCacheName | read-write | mandatory | Real server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.3 | ColumnsnL4WebCacheAdminStatus | read-write | mandatory | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.4 | ColumnsnL4WebCacheMaxConnections | read-write | mandatory | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.5 | ColumnsnL4WebCacheWeight | read-write | mandatory | Real Server weight |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.6 | ColumnsnL4WebCacheRowStatus | read-write | mandatory | To create or delete a real server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.7 | ColumnsnL4WebCacheDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15 | NodesnL4WebCacheGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1 | TablesnL4WebCacheGroupTable | not-accessible | mandatory | Web Cache Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1 | RowsnL4WebCacheGroupEntry | not-accessible | mandatory | An entry in the Web Cache Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.1 | ColumnsnL4WebCacheGroupId | read-only | mandatory | The identification for a Web Cache Group entry. The limit is from 1 to snL4MaxNumWebCacheGroup. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.2 | ColumnsnL4WebCacheGroupName | read-write | mandatory | Web Cache Group name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.3 | ColumnsnL4WebCacheGroupWebCacheIpList | read-write | mandatory | A list of the Server Cache Group Real Server IP Address. The number of IP Address is from 1 (4 OCTETs) to the snL4MaxNumServersPerWebCacheGroup, maximum number… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.4 | ColumnsnL4WebCacheGroupDestMask | read-write | mandatory | Cache Server Group Destination Mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.5 | ColumnsnL4WebCacheGroupSrcMask | read-write | mandatory | Cache Server Group Source Mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.6 | ColumnsnL4WebCacheGroupAdminStatus | read-write | mandatory | The WEB Cache Group is set either enabled(1)...........activated. disabled(0)..........disabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.7 | ColumnsnL4WebCacheGroupRowStatus | read-write | mandatory | To create or delete a Web Cache Group entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16 | NodesnL4WebCacheTrafficStats | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1 | TablesnL4WebCacheTrafficStatsTable | not-accessible | mandatory | Web Cache Traffic Statistics table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1 | RowsnL4WebCacheTrafficStatsEntry | not-accessible | mandatory | An entry in the Web Cache Traffic Statistics table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.1 | ColumnsnL4WebCacheTrafficIp | read-only | mandatory | Cache Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.2 | ColumnsnL4WebCacheTrafficPort | read-only | mandatory | The WEB Cache port is one of the protocol port such as UDP, TCP etc. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.3 | ColumnsnL4WebCacheCurrConnections | read-only | mandatory | Number of the current connections in WEB Cache group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.4 | ColumnsnL4WebCacheTotalConnections | read-only | mandatory | The total connections in WEB Cache group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.5 | ColumnsnL4WebCacheTxPkts | read-only | mandatory | Number of the Packets sending from Client/Web-Server to Cache Server |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.6 | ColumnsnL4WebCacheRxPkts | read-only | mandatory | Number of the Packets sending from Cache Server to Client/Web-Server |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.7 | ColumnsnL4WebCacheTxOctets | read-only | mandatory | Number of the Octets sending from Client/Web-Server to Cache Server |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.8 | ColumnsnL4WebCacheRxOctets | read-only | mandatory | Number of the Octets sending from Cache Server to Client/Web-Server |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.9 | ColumnsnL4WebCachePortState | read-only | mandatory | Web Cache Port state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17 | NodesnL4WebUncachedTrafficStats | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1 | TablesnL4WebUncachedTrafficStatsTable | not-accessible | mandatory | Web Uncached Traffic Statistics table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1 | RowsnL4WebUncachedTrafficStatsEntry | not-accessible | mandatory | An entry in the Web Uncached Traffic Statistics table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.1 | ColumnsnL4WebServerPort | read-only | mandatory | Web Server Port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.2 | ColumnsnL4WebClientPort | read-only | mandatory | Web Client Port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.3 | ColumnsnL4WebUncachedTxPkts | read-only | mandatory | Number of the Packets sending from Client port to Web Server port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.4 | ColumnsnL4WebUncachedRxPkts | read-only | mandatory | Number of the Packets sending from Web Server port to Client port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.5 | ColumnsnL4WebUncachedTxOctets | read-only | mandatory | Number of the Octets sending from Client port to Web Server port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.6 | ColumnsnL4WebUncachedRxOctets | read-only | mandatory | Number of the Octets sending from Web Server port to Client port |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.7 | ColumnsnL4WebServerPortName | read-only | mandatory | Web Server Port Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.8 | ColumnsnL4WebClientPortName | read-only | mandatory | Web Client Port Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18 | NodesnL4WebCachePort | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1 | TablesnL4WebCachePortTable | not-accessible | mandatory | Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1 | RowsnL4WebCachePortEntry | not-accessible | mandatory | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.1 | ColumnsnL4WebCachePortServerIp | read-only | mandatory | Cache Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.2 | ColumnsnL4WebCachePortPort | read-only | mandatory | The WEB Cache port is one of the protocol port such as UDP, TCP etc. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.3 | ColumnsnL4WebCachePortAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.4 | ColumnsnL4WebCachePortRowStatus | read-write | mandatory | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.5 | ColumnsnL4WebCachePortDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19 | NodesnL4RealServerCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1 | TablesnL4RealServerCfgTable | not-accessible | mandatory | Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1 | RowsnL4RealServerCfgEntry | not-accessible | mandatory | An entry in the Real Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.1 | ColumnsnL4RealServerCfgIP | read-only | mandatory | Real Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.2 | ColumnsnL4RealServerCfgName | read-write | mandatory | Real server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.3 | ColumnsnL4RealServerCfgAdminStatus | read-write | mandatory | Real Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.4 | ColumnsnL4RealServerCfgMaxConnections | read-write | mandatory | Real Server Maximum Connection allowed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.5 | ColumnsnL4RealServerCfgWeight | read-write | mandatory | Real Server weight |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.6 | ColumnsnL4RealServerCfgRowStatus | read-write | mandatory | To create or delete a real server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.7 | ColumnsnL4RealServerCfgDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20 | NodesnL4RealServerPortCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1 | TablesnL4RealServerPortCfgTable | not-accessible | mandatory | Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1 | RowsnL4RealServerPortCfgEntry | not-accessible | mandatory | An entry in the Real Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.1 | ColumnsnL4RealServerPortCfgIP | read-only | mandatory | The IP address for the Real Server . |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.2 | ColumnsnL4RealServerPortCfgServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.3 | ColumnsnL4RealServerPortCfgPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.4 | ColumnsnL4RealServerPortCfgAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.5 | ColumnsnL4RealServerPortCfgRowStatus | read-write | mandatory | To create or delete a Real server port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.6 | ColumnsnL4RealServerPortCfgDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21 | NodesnL4VirtualServerCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1 | TablesnL4VirtualServerCfgTable | not-accessible | mandatory | Virtual Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1 | RowsnL4VirtualServerCfgEntry | not-accessible | mandatory | An entry in L4 Virtual Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.1 | ColumnsnL4VirtualServerCfgVirtualIP | read-only | mandatory | Virtual Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.2 | ColumnsnL4VirtualServerCfgName | read-write | mandatory | Virtual server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.3 | ColumnsnL4VirtualServerCfgAdminStatus | read-write | mandatory | Virtual Server status is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.4 | ColumnsnL4VirtualServerCfgSDAType | read-write | mandatory | TCP/UDP Sessions Distribution Algorithms Type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.5 | ColumnsnL4VirtualServerCfgRowStatus | read-write | mandatory | To create or delete a virtual server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.6 | ColumnsnL4VirtualServerCfgDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22 | NodesnL4VirtualServerPortCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1 | TablesnL4VirtualServerPortCfgTable | not-accessible | mandatory | Virtual Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1 | RowsnL4VirtualServerPortCfgEntry | not-accessible | mandatory | An entry in the Virtual Server Port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.1 | ColumnsnL4VirtualServerPortCfgIP | read-only | mandatory | Virtual Server IP Address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.2 | ColumnsnL4VirtualServerPortCfgPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.3 | ColumnsnL4VirtualServerPortCfgServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.4 | ColumnsnL4VirtualServerPortCfgAdminStatus | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.5 | ColumnsnL4VirtualServerPortCfgSticky | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.6 | ColumnsnL4VirtualServerPortCfgConcurrent | read-write | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.7 | ColumnsnL4VirtualServerPortCfgRowStatus | read-write | mandatory | To create or delete a virtual server port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.8 | ColumnsnL4VirtualServerPortCfgDeleteState | read-only | mandatory | Delete operation state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23 | NodesnL4RealServerStatistic | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1 | TablesnL4RealServerStatisticTable | not-accessible | mandatory | Real Server Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1 | RowsnL4RealServerStatisticEntry | not-accessible | mandatory | An entry in the Real Server Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.1 | ColumnsnL4RealServerStatisticRealIP | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.2 | ColumnsnL4RealServerStatisticName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.3 | ColumnsnL4RealServerStatisticReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.4 | ColumnsnL4RealServerStatisticTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.5 | ColumnsnL4RealServerStatisticCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.6 | ColumnsnL4RealServerStatisticTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.7 | ColumnsnL4RealServerStatisticAge | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.8 | ColumnsnL4RealServerStatisticState | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.9 | ColumnsnL4RealServerStatisticReassignments | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.10 | ColumnsnL4RealServerStatisticReassignmentLimit | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.11 | ColumnsnL4RealServerStatisticFailedPortExists | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.12 | ColumnsnL4RealServerStatisticFailTime | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.13 | ColumnsnL4RealServerStatisticPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24 | NodesnL4RealServerPortStatistic | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1 | TablesnL4RealServerPortStatisticTable | not-accessible | mandatory | Real Server Port Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1 | RowsnL4RealServerPortStatisticEntry | not-accessible | mandatory | An entry in the Real Server Port Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.1 | ColumnsnL4RealServerPortStatisticIP | read-only | mandatory | The index for Real Server Port Statistic entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.2 | ColumnsnL4RealServerPortStatisticPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.3 | ColumnsnL4RealServerPortStatisticServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.4 | ColumnsnL4RealServerPortStatisticReassignCount | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.5 | ColumnsnL4RealServerPortStatisticState | read-only | mandatory | Real server port state |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.6 | ColumnsnL4RealServerPortStatisticFailTime | read-only | mandatory | Only useful, if real server port state is failed. Indicating how seconds has been elapsed from the last retry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.7 | ColumnsnL4RealServerPortStatisticCurrentConnection | read-only | mandatory | Real server port current connection |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.8 | ColumnsnL4RealServerPortStatisticTotalConnection | read-only | mandatory | Real server port total connection |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.9 | ColumnsnL4RealServerPortStatisticRxPkts | read-only | mandatory | Real server port receive packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.10 | ColumnsnL4RealServerPortStatisticTxPkts | read-only | mandatory | Real server port transmit packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.11 | ColumnsnL4RealServerPortStatisticRxBytes | read-only | mandatory | Real server port receive bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.12 | ColumnsnL4RealServerPortStatisticTxBytes | read-only | mandatory | Real server port transmit bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.13 | ColumnsnL4RealServerPortStatisticPeakConnection | read-only | mandatory | peak connection for real server port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25 | NodesnL4VirtualServerStatistic | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1 | TablesnL4VirtualServerStatisticTable | not-accessible | mandatory | Virtual Server Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1 | RowsnL4VirtualServerStatisticEntry | not-accessible | mandatory | An entry in L4 Virtual Server Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.1 | ColumnsnL4VirtualServerStatisticIP | read-only | mandatory | The table index for a Virtual Server Statistic entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.2 | ColumnsnL4VirtualServerStatisticName | read-only | mandatory | Virtual server name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.3 | ColumnsnL4VirtualServerStatisticReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.4 | ColumnsnL4VirtualServerStatisticTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.5 | ColumnsnL4VirtualServerStatisticTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.6 | ColumnsnL4VirtualServerStatisticReceiveBytes | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.7 | ColumnsnL4VirtualServerStatisticTransmitBytes | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.8 | ColumnsnL4VirtualServerStatisticSymmetricState | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.9 | ColumnsnL4VirtualServerStatisticSymmetricPriority | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.10 | ColumnsnL4VirtualServerStatisticSymmetricKeep | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.11 | ColumnsnL4VirtualServerStatisticSymmetricActivates | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.12 | ColumnsnL4VirtualServerStatisticSymmetricInactives | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.13 | ColumnsnL4VirtualServerStatisticSymmetricBestStandbyMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.14 | ColumnsnL4VirtualServerStatisticSymmetricActiveMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26 | NodesnL4VirtualServerPortStatistic | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1 | TablesnL4VirtualServerPortStatisticTable | not-accessible | mandatory | Virtual Server Port Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1 | RowsnL4VirtualServerPortStatisticEntry | not-accessible | mandatory | An entry in the Virtual Server Port Statistic table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.1 | ColumnsnL4VirtualServerPortStatisticIP | read-only | mandatory | The index for Virtual Server Port Statistic entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.2 | ColumnsnL4VirtualServerPortStatisticPort | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.3 | ColumnsnL4VirtualServerPortStatisticServerName | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.4 | ColumnsnL4VirtualServerPortStatisticCurrentConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.5 | ColumnsnL4VirtualServerPortStatisticTotalConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.6 | ColumnsnL4VirtualServerPortStatisticPeakConnection | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.27 | NodesnL4GslbSiteRemoteServerIrons | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1 | TablesnL4GslbSiteRemoteServerIronTable | not-accessible | mandatory | GSLB remote ServerIron configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1 | RowsnL4GslbSiteRemoteServerIronEntry | not-accessible | mandatory | An entry of a GSLB remote ServerIron configuration. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1.1 | ColumnsnL4GslbSiteRemoteServerIronIP | read-only | mandatory | The index for each remote ServerIron in a site. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1.2 | ColumnsnL4GslbSiteRemoteServerIronPreference | read-write | mandatory | The preference of a remote ServerIron. The default value is 128. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28 | NodesnL4History | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1 | TablesnL4RealServerHistoryControlTable | not-accessible | mandatory | A list of history control entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1 | RowsnL4RealServerHistoryControlEntry | not-accessible | mandatory | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerHistoryControlInterval object might be named… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.1 | ColumnsnL4RealServerHistoryControlIndex | read-only | mandatory | An index that uniquely identifies an entry in the snL4RealServerHistoryControl table.Each such entry defines a set of samples at a particular interval for an i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.2 | ColumnsnL4RealServerHistoryControlDataSource | read-write | mandatory | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerHist… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.3 | ColumnsnL4RealServerHistoryControlBucketsRequested | read-write | mandatory | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerHisto… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.4 | ColumnsnL4RealServerHistoryControlBucketsGranted | read-only | mandatory | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerHistoryCont… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.5 | ColumnsnL4RealServerHistoryControlInterval | read-write | mandatory | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerHistoryContro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.6 | ColumnsnL4RealServerHistoryControlOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.7 | ColumnsnL4RealServerHistoryControlStatus | read-write | mandatory | The status of this snL4RealServerHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerHistoryControlEntry will be… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2 | TablesnL4RealServerHistoryTable | not-accessible | mandatory | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1 | RowsnL4RealServerHistoryEntry | not-accessible | mandatory | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerHistoryControlEntry which set … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.1 | ColumnsnL4RealServerHistoryIndex | read-only | mandatory | The snL4RealServerHistory of which this entry is a part.The snL4RealServerHistory identified by a particular value of this index is the same snL4RealServerHist… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.2 | ColumnsnL4RealServerHistorySampleIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerHistoryControlEntry. Thi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.3 | ColumnsnL4RealServerHistoryIntervalStart | read-only | mandatory | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.4 | ColumnsnL4RealServerHistoryReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.5 | ColumnsnL4RealServerHistoryTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.6 | ColumnsnL4RealServerHistoryTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.7 | ColumnsnL4RealServerHistoryCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.8 | ColumnsnL4RealServerHistoryPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.9 | ColumnsnL4RealServerHistoryReassignments | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3 | TablesnL4RealServerPortHistoryControlTable | not-accessible | mandatory | A list of history control entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1 | RowsnL4RealServerPortHistoryControlEntry | not-accessible | mandatory | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4RealServerPortHistoryControlInterval object might be n… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.1 | ColumnsnL4RealServerPortHistoryControlIndex | read-only | mandatory | An index that uniquely identifies an entry in the snL4RealServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval for … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.2 | ColumnsnL4RealServerPortHistoryControlDataSource | read-write | mandatory | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4RealServerPort… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.3 | ColumnsnL4RealServerPortHistoryControlBucketsRequested | read-write | mandatory | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4RealServerPortH… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.4 | ColumnsnL4RealServerPortHistoryControlBucketsGranted | read-only | mandatory | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4RealServerPortHistory… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.5 | ColumnsnL4RealServerPortHistoryControlInterval | read-write | mandatory | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4RealServerPortHistoryCo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.6 | ColumnsnL4RealServerPortHistoryControlOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.7 | ColumnsnL4RealServerPortHistoryControlStatus | read-write | mandatory | The status of this snL4RealServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4RealServerPortHistoryControlEntry… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4 | TablesnL4RealServerPortHistoryTable | not-accessible | mandatory | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1 | RowsnL4RealServerPortHistoryEntry | not-accessible | mandatory | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4RealServerPortHistoryControlEntry which … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.1 | ColumnsnL4RealServerPortHistoryIndex | read-only | mandatory | The snL4RealServerPortHistory of which this entry is a part.The snL4RealServerPortHistory identified by a particular value of this index is the same snL4RealSe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.2 | ColumnsnL4RealServerPortHistorySampleIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4RealServerPortHistoryControlEntry.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.3 | ColumnsnL4RealServerPortHistoryIntervalStart | read-only | mandatory | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.4 | ColumnsnL4RealServerPortHistoryReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.5 | ColumnsnL4RealServerPortHistoryTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.6 | ColumnsnL4RealServerPortHistoryTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.7 | ColumnsnL4RealServerPortHistoryCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.8 | ColumnsnL4RealServerPortHistoryPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.9 | ColumnsnL4RealServerPortHistoryResponseTime | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5 | TablesnL4VirtualServerHistoryControlTable | not-accessible | mandatory | A list of history control entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1 | RowsnL4VirtualServerHistoryControlEntry | not-accessible | mandatory | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerHistoryControlInterval object might be na… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.1 | ColumnsnL4VirtualServerHistoryControlIndex | read-only | mandatory | An index that uniquely identifies an entry in the snL4VirtualServerHistoryControl table.Each such entry defines a set of samples at a particular interval for a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.2 | ColumnsnL4VirtualServerHistoryControlDataSource | read-write | mandatory | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerH… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.3 | ColumnsnL4VirtualServerHistoryControlBucketsRequested | read-write | mandatory | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerHi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.4 | ColumnsnL4VirtualServerHistoryControlBucketsGranted | read-only | mandatory | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerHistoryC… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.5 | ColumnsnL4VirtualServerHistoryControlInterval | read-write | mandatory | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerHistoryCon… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.6 | ColumnsnL4VirtualServerHistoryControlOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.7 | ColumnsnL4VirtualServerHistoryControlStatus | read-write | mandatory | The status of this snL4VirtualServerHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerHistoryControlEntry w… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6 | TablesnL4VirtualServerHistoryTable | not-accessible | mandatory | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1 | RowsnL4VirtualServerHistoryEntry | not-accessible | mandatory | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerHistoryControlEntry which s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.1 | ColumnsnL4VirtualServerHistoryIndex | read-only | mandatory | The snL4VirtualServerHistory of which this entry is a part.The snL4VirtualServerHistory identified by a particular value of this index is the same snL4VirtualS… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.2 | ColumnsnL4VirtualServerHistorySampleIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerHistoryControlEntry. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.3 | ColumnsnL4VirtualServerHistoryIntervalStart | read-only | mandatory | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.4 | ColumnsnL4VirtualServerHistoryReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.5 | ColumnsnL4VirtualServerHistoryTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.6 | ColumnsnL4VirtualServerHistoryTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.7 | ColumnsnL4VirtualServerHistoryCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.8 | ColumnsnL4VirtualServerHistoryPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7 | TablesnL4VirtualServerPortHistoryControlTable | not-accessible | mandatory | A list of history control entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1 | RowsnL4VirtualServerPortHistoryControlEntry | not-accessible | mandatory | A list of parameters that set up a periodic sampling of statistics.As an example, an instance of the snL4VirtualServerPortHistoryControlInterval object might b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.1 | ColumnsnL4VirtualServerPortHistoryControlIndex | read-only | mandatory | An index that uniquely identifies an entry in the snL4VirtualServerPortHistoryControl table.Each such entry defines a set of samples at a particular interval f… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.2 | ColumnsnL4VirtualServerPortHistoryControlDataSource | read-write | mandatory | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this snL4VirtualServerP… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.3 | ColumnsnL4VirtualServerPortHistoryControlBucketsRequested | read-write | mandatory | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this snL4VirtualServerPo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.4 | ColumnsnL4VirtualServerPortHistoryControlBucketsGranted | read-only | mandatory | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this snL4VirtualServerPortHist… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.5 | ColumnsnL4VirtualServerPortHistoryControlInterval | read-write | mandatory | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this snL4VirtualServerPortHistor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.6 | ColumnsnL4VirtualServerPortHistoryControlOwner | read-write | mandatory | The entity that configured this entry and is therefore using the resources assigned to it. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.7 | ColumnsnL4VirtualServerPortHistoryControlStatus | read-write | mandatory | The status of this snL4VirtualServerPortHistoryControl entry. Each instance of the media-specific table associated with this snL4VirtualServerPortHistoryContro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8 | TablesnL4VirtualServerPortHistoryTable | not-accessible | mandatory | A list of Ethernet snL4History entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1 | RowsnL4VirtualServerPortHistoryEntry | not-accessible | mandatory | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the snL4VirtualServerPortHistoryControlEntry whi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.1 | ColumnsnL4VirtualServerPortHistoryIndex | read-only | mandatory | The snL4VirtualServerPortHistory of which this entry is a part.The snL4VirtualServerPortHistory identified by a particular value of this index is the same snL4… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.2 | ColumnsnL4VirtualServerPortHistorySampleIndex | read-only | mandatory | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same snL4VirtualServerPortHistoryControlEnt… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.3 | ColumnsnL4VirtualServerPortHistoryIntervalStart | read-only | mandatory | The value of sysUpTime at the start of the interval over which this sample was measured.If the probe keeps track of the time of day, it should start the first … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.4 | ColumnsnL4VirtualServerPortHistoryReceivePkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.5 | ColumnsnL4VirtualServerPortHistoryTransmitPkts | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.6 | ColumnsnL4VirtualServerPortHistoryTotalConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.7 | ColumnsnL4VirtualServerPortHistoryCurConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.8 | ColumnsnL4VirtualServerPortHistoryPeakConnections | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5 | NodesnStack | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1 | NodesnStackGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.1 | ScalarsnStackPriSwitchMode | read-write | mandatory | The Stackable Management Primary Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........primary switch enabled disabled(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.2 | ScalarsnStackMaxSecSwitch | read-only | mandatory | The Maximum Secondary Switches are allowed in the Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.3 | ScalarsnStackTotalSecSwitch | read-only | mandatory | The Total Secondary Switches currently connected to the Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.4 | ScalarsnStackSyncAllSecSwitch | read-write | mandatory | Synchronize all the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.5 | ScalarsnStackSmSlotIndex | read-write | mandatory | The Slot 0 is the Master slot and Slot 1-8 are slaves. All the slot-based MIB data can be retrieved with respect to this slot index such as snChassis global MI… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.6 | ScalarsnStackFmpSetProcess | read-only | mandatory | normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state. pending(1) - The pending process is waiting for the result of an FMP-SET. fail… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2 | NodesnStackSecSwitchInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1 | TablesnStackSecSwitchTable | not-accessible | mandatory | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1 | RowsnStackSecSwitchEntry | not-accessible | mandatory | An entry in the Stackable Management Secondary Switch Information table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.1 | ColumnsnStackSecSwitchIndex | read-only | mandatory | The secondary switch index must not be greater than the snStackMaxSecSwitch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.2 | ColumnsnStackSecSwitchSlotId | read-write | mandatory | The secondary switch slot ID must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.3 | ColumnsnStackSecSwitchPortCnts | read-only | mandatory | The number of ports in this secondary switch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.4 | ColumnsnStackSecSwitchEnabled | read-write | mandatory | The secondary switch has been selected to Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.5 | ColumnsnStackSecSwitchAck | read-only | mandatory | The secondary switch has sent reponse to the primary switch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.6 | ColumnsnStackSecSwitchMacAddr | read-only | mandatory | The secondary switch physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.7 | ColumnsnStackSecSwitchSyncCmd | read-write | mandatory | Synchronize the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).....… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.8 | ColumnsnStackSecSwitchIpAddr | read-write | mandatory | The secondary switch IP Address and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.9 | ColumnsnStackSecSwitchSubnetMask | read-write | mandatory | The secondary switch IP Subnet Mask and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10 | ColumnsnStackSecSwitchCfgCmd | read-write | mandatory | snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2 | Noderouter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1 | NodesnIpx | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1 | NodesnIpxGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 | ScalarsnIpxRoutingMode | read-write | mandatory | Enabled/Disabled System IPX Routing Mode status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 | ScalarsnIpxNetBiosFilterMode | read-write | mandatory | Enabled/Disabled NetBios Filter Mode status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 | ScalarsnIpxClearCache | read-write | mandatory | clear(1) will clear cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 | ScalarsnIpxClearRoute | read-write | mandatory | clear(1) will clear ipx route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 | ScalarsnIpxClearTrafficCnts | read-write | mandatory | clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPkts… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 | ScalarsnIpxRcvPktsCnt | read-only | mandatory | IPX incoming packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 | ScalarsnIpxTxPktsCnt | read-only | mandatory | IPX Outgoing packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 | ScalarsnIpxFwdPktsCnt | read-only | mandatory | IPX forwarding packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 | ScalarsnIpxRcvDropPktsCnt | read-only | mandatory | IPX receiving drop packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 | ScalarsnIpxRcvFiltPktsCnt | read-only | mandatory | IPX receiving filter packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 | ScalarsnIpxRipGblFiltList | read-write | mandatory | An IPX RIP Global Filter List. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 | ScalarsnIpxRipFiltOnAllPort | read-write | mandatory | Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 | ScalarsnIpxSapGblFiltList | read-write | mandatory | An IPX SAP Global Filter List. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14 | ScalarsnIpxSapFiltOnAllPort | read-write | mandatory | Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 | ScalarsnIpxTxDropPktsCnt | read-only | mandatory | IPX transmitting drop packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 | ScalarsnIpxTxFiltPktsCnt | read-only | mandatory | IPX transmitting filter packets counter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2 | NodesnIpxCache | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1 | TablesnIpxCacheTable | not-accessible | mandatory | IPX Cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1 | RowsnIpxCacheEntry | not-accessible | mandatory | An entry in the IPX Cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1 | ColumnsnIpxCacheIndex | read-only | mandatory | The table index for a IPX Cache entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2 | ColumnsnIpxCacheNetNum | read-only | mandatory | Cache Network number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3 | ColumnsnIpxCacheNode | read-only | mandatory | Cache Node Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4 | ColumnsnIpxCacheOutFilter | read-only | mandatory | Cache Outbound Filter is ether disabled(0) or enabled(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5 | ColumnsnIpxCacheEncap | read-only | mandatory | The IPX encapsulation frame type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6 | ColumnsnIpxCachePort | read-only | mandatory | IPX Router Port number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3 | NodesnIpxRoute | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1 | TablesnIpxRouteTable | not-accessible | mandatory | IPX route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1 | RowsnIpxRouteEntry | not-accessible | mandatory | An entry in the IPX route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1 | ColumnsnIpxRouteIndex | read-only | mandatory | The table index for a IPX route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2 | ColumnsnIpxDestNetNum | read-only | mandatory | Destination Network number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3 | ColumnsnIpxFwdRouterNode | read-only | mandatory | Forward Router Node Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4 | ColumnsnIpxDestHopCnts | read-only | mandatory | Number of hops to reach the destination. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5 | ColumnsnIpxRouteMetric | read-only | mandatory | The metrics to next hop router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6 | ColumnsnIpxDestPort | read-only | mandatory | The destination port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4 | NodesnIpxServer | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1 | TablesnIpxServerTable | not-accessible | mandatory | IPX Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1 | RowsnIpxServerEntry | not-accessible | mandatory | An entry in the IPX Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1 | ColumnsnIpxServerIndex | read-only | mandatory | The table index for a IPX Server entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2 | ColumnsnIpxServerType | read-only | mandatory | IPX Server Type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3 | ColumnsnIpxServerNetNum | read-only | mandatory | Server Network number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4 | ColumnsnIpxServerNode | read-only | mandatory | Server Node Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5 | ColumnsnIpxServerSocket | read-only | mandatory | Server Socket Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6 | ColumnsnIpxServerHopCnts | read-only | mandatory | Number of intervening networks to reach the server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7 | ColumnsnIpxServerName | read-only | mandatory | IPX Server Name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5 | NodesnIpxFwdFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1 | TablesnIpxFwdFilterTable | not-accessible | mandatory | IPX Forward Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1 | RowsnIpxFwdFilterEntry | not-accessible | mandatory | An entry in the IPX Forward Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1 | ColumnsnIpxFwdFilterIdx | read-only | mandatory | The filter ID for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2 | ColumnsnIpxFwdFilterAction | read-write | mandatory | Action to take if the ipx packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3 | ColumnsnIpxFwdFilterSocket | read-write | mandatory | IPX Forward Filter Socket Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4 | ColumnsnIpxFwdFilterSrcNet | read-write | mandatory | Source Network Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5 | ColumnsnIpxFwdFilterSrcNode | read-write | mandatory | Source Node Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6 | ColumnsnIpxFwdFilterDestNet | read-write | mandatory | Destination Network Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7 | ColumnsnIpxFwdFilterDestNode | read-write | mandatory | Destination Node Number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8 | ColumnsnIpxFwdFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6 | NodesnIpxRipFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1 | TablesnIpxRipFilterTable | not-accessible | mandatory | IPX RIP Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1 | RowsnIpxRipFilterEntry | not-accessible | mandatory | An entry in the IPX RIP Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1 | ColumnsnIpxRipFilterId | read-only | mandatory | The filter ID for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2 | ColumnsnIpxRipFilterAction | read-write | mandatory | Action to take if the ipx packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3 | ColumnsnIpxRipFilterNet | read-write | mandatory | IPX RIP Filter Network number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4 | ColumnsnIpxRipFilterMask | read-write | mandatory | IPX RIP Filter Network/Subnet Mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5 | ColumnsnIpxRipFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7 | NodesnIpxSapFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1 | TablesnIpxSapFilterTable | not-accessible | mandatory | IPX SAP Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1 | RowsnIpxSapFilterEntry | not-accessible | mandatory | An entry in the IPX SAP Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1 | ColumnsnIpxSapFilterId | read-only | mandatory | The filter ID for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2 | ColumnsnIpxSapFilterAction | read-write | mandatory | Action to take if the ipx packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3 | ColumnsnIpxSapFilterType | read-write | mandatory | IPX SAP Filter type to be matched. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4 | ColumnsnIpxSapFilterName | read-write | mandatory | IPX SAP Filter Name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5 | ColumnsnIpxSapFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8 | NodesnIpxIfFwdAccess | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1 | TablesnIpxIfFwdAccessTable | not-accessible | mandatory | IPX IF Forward Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1 | RowsnIpxIfFwdAccessEntry | not-accessible | mandatory | An entry in the IPX Forward Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1 | ColumnsnIpxIfFwdAccessPort | read-only | mandatory | The IPX interface to which the Forward Filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2 | ColumnsnIpxIfFwdAccessDir | read-only | mandatory | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3 | ColumnsnIpxIfFwdAccessFilterList | read-write | mandatory | An IPX IF Forward Filter List. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4 | ColumnsnIpxIfFwdAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9 | NodesnIpxIfRipAccess | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1 | TablesnIpxIfRipAccessTable | not-accessible | mandatory | IPX IF RIP Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1 | RowsnIpxIfRipAccessEntry | not-accessible | mandatory | An entry in the IPX Forward Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1 | ColumnsnIpxIfRipAccessPort | read-only | mandatory | The IPX interface to which the RIP Filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2 | ColumnsnIpxIfRipAccessDir | read-only | mandatory | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3 | ColumnsnIpxIfRipAccessFilterList | read-write | mandatory | An IPX IF RIP Access Filter List. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4 | ColumnsnIpxIfRipAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10 | NodesnIpxIfSapAccess | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1 | TablesnIpxIfSapAccessTable | not-accessible | mandatory | IPX IF RIP Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1 | RowsnIpxIfSapAccessEntry | not-accessible | mandatory | An entry in the IPX Forward Access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1 | ColumnsnIpxIfSapAccessPort | read-only | mandatory | The IPX interface to which the SAP Filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2 | ColumnsnIpxIfSapAccessDir | read-only | mandatory | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3 | ColumnsnIpxIfSapAccessFilterList | read-write | mandatory | An IPX IF SAP Access Filter List. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4 | ColumnsnIpxIfSapAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11 | NodesnIpxPortAddr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1 | TablesnIpxPortAddrTable | not-accessible | mandatory | IPX port address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1 | RowsnIpxPortAddrEntry | not-accessible | mandatory | An entry in the IPX Port Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1 | ColumnsnIpxPortAddrPort | read-only | mandatory | The port index for port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2 | ColumnsnIpxPortAddrEncap | read-only | mandatory | The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame ty… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3 | ColumnsnIpxPortAddrNetNum | read-write | mandatory | An unique Network number for the IPX interface port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4 | ColumnsnIpxPortAddrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5 | ColumnsnIpxPortAddrNetBiosFilterMode | read-write | mandatory | Enabled/Disabled NetBios Filter Mode status per Port Address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12 | NodesnIpxPortCounters | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1 | TablesnIpxPortCountersTable | not-accessible | mandatory | IPX port Counters table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1 | RowsnIpxPortCountersEntry | not-accessible | mandatory | An entry in the IPX Port Counters table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1 | ColumnsnIpxPortCountersPort | read-only | mandatory | The port index for port Counters entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2 | ColumnsnIpxPortCountersRcvPktsCnt | read-only | mandatory | IPX incoming packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3 | ColumnsnIpxPortCountersTxPktsCnt | read-only | mandatory | IPX Outgoing packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4 | ColumnsnIpxPortCountersFwdPktsCnt | read-only | mandatory | IPX forwarding packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5 | ColumnsnIpxPortCountersRcvDropPktsCnt | read-only | mandatory | IPX receiving drop packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6 | ColumnsnIpxPortCountersTxDropPktsCnt | read-only | mandatory | IPX transmitting drop packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7 | ColumnsnIpxPortCountersRcvFiltPktsCnt | read-only | mandatory | IPX receiving filter packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8 | ColumnsnIpxPortCountersTxFiltPktsCnt | read-only | mandatory | IPX transmitting filter packets counter for the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2 | NodesnIp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1 | NodesnRtIpGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1 | ScalarsnRtClearArpCache | read-write | mandatory | clear(1) will clear arp cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2 | ScalarsnRtClearIpCache | read-write | mandatory | clear(1) will clear ip route cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.3 | ScalarsnRtClearIpRoute | read-write | mandatory | clear(1) will clear ip route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.4 | ScalarsnRtBootpServer | read-write | deprecated | IP address of bootp server to which bootp packet need to be relayed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.5 | ScalarsnRtBootpRelayMax | read-write | mandatory | Maximum number of hop the bootp packet should travel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.6 | ScalarsnRtArpAge | read-write | mandatory | The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.7 | ScalarsnRtIpIrdpEnable | read-write | mandatory | Perform router advertisement on this box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.8 | ScalarsnRtIpLoadShare | read-write | mandatory | If more than one route available, use them to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.9 | ScalarsnRtIpProxyArp | read-write | mandatory | Enable/disable proxy arp function in the box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.10 | ScalarsnRtIpRarp | read-write | mandatory | Enable/disable RARP server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.11 | ScalarsnRtIpTtl | read-write | mandatory | The time to live value to be used in IP header of IP packet generated by the box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.12 | ScalarsnRtIpSetAllPortConfig | read-write | mandatory | The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.13 | ScalarsnRtIpFwdCacheMaxEntries | read-only | mandatory | The maximum number of ip forwarding table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.14 | ScalarsnRtIpFwdCacheCurEntries | read-only | mandatory | The current number of ip forwarding table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.15 | ScalarsnRtIpMaxStaticRouteEntries | read-only | mandatory | The maximum number of static route entries in the static route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.16 | ScalarsnRtIpDirBcastFwd | read-write | mandatory | Enable/Disable directed broadcast forwarding. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.17 | ScalarsnRtIpLoadShareNumOfPaths | read-write | mandatory | Number of routes are used to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.18 | ScalarsnRtIpLoadShareMaxPaths | read-only | mandatory | Maximum number of routes can be configured to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.19 | ScalarsnRtIpLoadShareMinPaths | read-only | mandatory | Minimum number of routes can be configured to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.20 | ScalarsnRtIpProtocolRouterId | read-write | mandatory | Router Id for all IP Protocols. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.21 | ScalarsnRtIpSourceRoute | read-write | mandatory | Enable/Disable source routing support, ability to drop the source routing packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2 | TablesnRtIpStaticRouteTable | not-accessible | mandatory | IP static/default route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1 | RowsnRtIpStaticRouteEntry | not-accessible | mandatory | An entry in the IP static route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1 | ColumnsnRtIpStaticRouteIndex | read-only | mandatory | The table index for a static route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2 | ColumnsnRtIpStaticRouteDest | read-write | mandatory | Destination IP address. 0.0.0.0 for default route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3 | ColumnsnRtIpStaticRouteMask | read-write | mandatory | Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4 | ColumnsnRtIpStaticRouteNextHop | read-write | mandatory | IP address of next hop router that is located on one of the directly attached IP subnet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5 | ColumnsnRtIpStaticRouteMetric | read-write | mandatory | The metrics to next hop router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6 | ColumnsnRtIpStaticRouteRowStatus | read-write | mandatory | To create or delete a static route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7 | ColumnsnRtIpStaticRouteDistance | read-write | mandatory | Administration distance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 | TablesnRtIpFilterTable | not-accessible | mandatory | IP filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1 | RowsnRtIpFilterEntry | not-accessible | mandatory | An entry in the IP filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1 | ColumnsnRtIpFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2 | ColumnsnRtIpFilterAction | read-write | mandatory | Action to take if the ip packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3 | ColumnsnRtIpFilterProtocol | read-write | mandatory | Transport protocol. 0 means don't care |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4 | ColumnsnRtIpFilterSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5 | ColumnsnRtIpFilterSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6 | ColumnsnRtIpFilterDestIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7 | ColumnsnRtIpFilterDestMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8 | ColumnsnRtIpFilterOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9 | ColumnsnRtIpFilterOperand | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10 | ColumnsnRtIpFilterRowStatus | read-write | mandatory | To create or delete a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11 | ColumnsnRtIpFilterEstablished | read-write | mandatory | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12 | ColumnsnRtIpFilterQosPriority | read-write | mandatory | The router L4 Qos Priority values are: low(0) high(1) The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), lev… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4 | TablesnRtIpRarpTable | not-accessible | mandatory | IP RARP table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1 | RowsnRtIpRarpEntry | not-accessible | mandatory | An entry in the IP Rarp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1 | ColumnsnRtIpRarpIndex | read-only | mandatory | The table index for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2 | ColumnsnRtIpRarpMac | read-write | mandatory | The Mac address for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3 | ColumnsnRtIpRarpIp | read-write | mandatory | The IP address for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4 | ColumnsnRtIpRarpRowStatus | read-write | mandatory | To create or delete a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5 | TablesnRtStaticArpTable | not-accessible | mandatory | IP static arp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1 | RowsnRtStaticArpEntry | not-accessible | mandatory | An entry in the IP static arp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1 | ColumnsnRtStaticArpIndex | read-only | mandatory | The table index for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2 | ColumnsnRtStaticArpIp | read-write | mandatory | The IP address for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3 | ColumnsnRtStaticArpMac | read-write | mandatory | The Mac address for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4 | ColumnsnRtStaticArpPort | read-write | mandatory | The port index for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5 | ColumnsnRtStaticArpRowStatus | read-write | mandatory | To create or delete a Static Arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6 | TablesnRtIpPortAddrTable | not-accessible | deprecated | IP port address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1 | RowsnRtIpPortAddrEntry | not-accessible | deprecated | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1 | ColumnsnRtIpPortAddrPortIndex | read-only | deprecated | The port index for port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2 | ColumnsnRtIpPortAddress | read-only | deprecated | The port IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3 | ColumnsnRtIpPortSubnetMask | read-write | deprecated | The port IP address subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4 | ColumnsnRtIpPortAddrType | read-write | deprecated | The port IP address type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5 | ColumnsnRtIpPortRowStatus | read-write | deprecated | To create or delete a port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7 | TablesnRtIpPortAccessTable | not-accessible | deprecated | IP port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1 | RowsnRtIpPortAccessEntry | not-accessible | deprecated | An entry in the IP Port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1 | ColumnsnRtIpPortAccessPortIndex | read-only | deprecated | The port index for port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2 | ColumnsnRtIpPortAccessDirection | read-only | deprecated | The incoming or outgoing check for port access. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3 | ColumnsnRtIpPortAccessFilters | read-write | deprecated | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4 | ColumnsnRtIpPortAccessRowStatus | read-write | deprecated | To create or delete a port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8 | TablesnRtIpPortConfigTable | not-accessible | deprecated | IP port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1 | RowsnRtIpPortConfigEntry | not-accessible | deprecated | An entry in the IP Port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1 | ColumnsnRtIpPortConfigPortIndex | read-only | deprecated | The port index for port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2 | ColumnsnRtIpPortMtu | read-write | deprecated | The maximun transfer unit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3 | ColumnsnRtIpPortEncap | read-write | deprecated | Data link encapsulation to be used on the IP frame transmitted on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4 | ColumnsnRtIpPortMetric | read-write | deprecated | The metric. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5 | ColumnsnRtIpPortDirBcastFwd | read-write | deprecated | Enable/Disable directed broadcast forwarding on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9 | NodesnRtBcastFwd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1 | NodesnRtBcastFwdGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1.1 | ScalarsnRtUdpBcastFwdEnable | read-write | mandatory | Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port ta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2 | NodesnRtUdpBcastFwdPort | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1 | TablesnRtUdpBcastFwdPortTable | not-accessible | mandatory | This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1 | RowsnRtUdpBcastFwdPortEntry | not-accessible | mandatory | An entry of the UDP broadcast forwarding port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1 | ColumnsnRtUdpBcastFwdPortIndex | read-only | mandatory | The table index for a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2 | ColumnsnRtUdpBcastFwdPortNumber | read-write | mandatory | UDP port number for which UDP broadcast forwarding is enabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3 | ColumnsnRtUdpBcastFwdPortRowStatus | read-write | mandatory | To create or delete a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3 | NodesnRtUdpHelper | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1 | TablesnRtUdpHelperTable | not-accessible | mandatory | UDP helper table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1 | RowsnRtUdpHelperEntry | not-accessible | mandatory | An entry of the UDP helper table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1 | ColumnsnRtUdpHelperPortIndex | read-only | mandatory | The port index for a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2 | ColumnsnRtUdpHelperIndex | read-only | mandatory | The table index for a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3 | ColumnsnRtUdpHelperAddr | read-write | mandatory | The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4 | ColumnsnRtUdpHelperRowStatus | read-write | mandatory | To create or delete a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10 | NodesnRtIpTraceRoute | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1 | NodesnRtIpTraceRouteGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1 | ScalarsnRtIpTraceRouteTargetAddr | read-write | mandatory | Target IP address of which trace route is performed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2 | ScalarsnRtIpTraceRouteMinTtl | read-write | mandatory | Minimum TTL value carried in the first probe packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3 | ScalarsnRtIpTraceRouteMaxTtl | read-write | mandatory | Maximum TTL value carried in the last probe packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4 | ScalarsnRtIpTraceRouteTimeOut | read-write | mandatory | Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5 | ScalarsnRtIpTraceRouteControl | read-write | mandatory | Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2 | NodesnRtIpTraceRouteResult | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 | TablesnRtIpTraceRouteResultTable | not-accessible | mandatory | Trace route result table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1 | RowsnRtIpTraceRouteResultEntry | not-accessible | mandatory | An entry of the trace route result table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1 | ColumnsnRtIpTraceRouteResultIndex | read-only | mandatory | The table index for a trace route result entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2 | ColumnsnRtIpTraceRouteResultAddr | read-only | mandatory | The router or the target address of which forms part of the route to reach the destination address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3 | ColumnsnRtIpTraceRouteResultRoundTripTime1 | read-only | mandatory | The round trip time between the first probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4 | ColumnsnRtIpTraceRouteResultRoundTripTime2 | read-only | mandatory | The round trip time between the second probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11 | TablesnRtIpFwdCacheTable | not-accessible | mandatory | IP forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1 | RowsnRtIpFwdCacheEntry | not-accessible | mandatory | An entry in the IP forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1 | ColumnsnRtIpFwdCacheIndex | read-only | mandatory | The table index for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2 | ColumnsnRtIpFwdCacheIp | read-only | mandatory | The IP address of a station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3 | ColumnsnRtIpFwdCacheMac | read-only | mandatory | The Mac address of an IP station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4 | ColumnsnRtIpFwdCacheNextHopIp | read-only | mandatory | The next hop router IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5 | ColumnsnRtIpFwdCacheOutgoingPort | read-only | mandatory | The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the fol… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6 | ColumnsnRtIpFwdCacheType | read-only | mandatory | The 'dynamic' or 'permanent' type for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7 | ColumnsnRtIpFwdCacheAction | read-only | mandatory | The action to take. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8 | ColumnsnRtIpFwdCacheFragCheck | read-only | mandatory | Check for fragmentation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9 | ColumnsnRtIpFwdCacheSnapHdr | read-only | mandatory | Apply SNAP encapsulation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10 | ColumnsnRtIpFwdCacheVLanId | read-only | mandatory | The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12 | TablesnIpAsPathAccessListTable | not-accessible | mandatory | Ip As-Path Access List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1 | RowsnIpAsPathAccessListEntry | not-accessible | mandatory | An entry in the Ip As-Path Access List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.1 | ColumnsnIpAsPathAccessListIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.2 | ColumnsnIpAsPathAccessListSequence | read-only | mandatory | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.3 | ColumnsnIpAsPathAccessListAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.4 | ColumnsnIpAsPathAccessListRegExpression | read-write | mandatory | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.5 | ColumnsnIpAsPathAccessListRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13 | TablesnIpCommunityListTable | not-accessible | mandatory | Ip Community List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1 | RowsnIpCommunityListEntry | not-accessible | mandatory | An entry in the Ip Community List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.1 | ColumnsnIpCommunityListIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.2 | ColumnsnIpCommunityListSequence | read-only | mandatory | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.3 | ColumnsnIpCommunityListAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.4 | ColumnsnIpCommunityListCommNum | read-write | mandatory | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.5 | ColumnsnIpCommunityListInternet | read-write | mandatory | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.6 | ColumnsnIpCommunityListNoAdvertise | read-write | mandatory | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.7 | ColumnsnIpCommunityListNoExport | read-write | mandatory | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.8 | ColumnsnIpCommunityListRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.9 | ColumnsnIpCommunityListLocalAs | read-write | mandatory | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14 | TablesnIpPrefixListTable | not-accessible | mandatory | Ip Prefix List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1 | RowsnIpPrefixListEntry | not-accessible | mandatory | An entry in the Ip As-Path Access List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.1 | ColumnsnIpPrefixListName | read-only | mandatory | An octet string of the ip prefix list name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.2 | ColumnsnIpPrefixListSequence | read-only | mandatory | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.3 | ColumnsnIpPrefixListDesc | read-write | mandatory | An octet string of the ip prefix list description, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.4 | ColumnsnIpPrefixListAction | read-write | mandatory | Action to take if the ip prefix match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.5 | ColumnsnIpPrefixListAddr | read-write | mandatory | Prefix IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.6 | ColumnsnIpPrefixListMask | read-write | mandatory | Prefix IP mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.7 | ColumnsnIpPrefixListGeValue | read-write | mandatory | Greater than value. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.8 | ColumnsnIpPrefixListLeValue | read-write | mandatory | Less than value. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.9 | ColumnsnIpPrefixListRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15 | NodesnAgAcl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1 | NodesnAgAclGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1.1 | ScalarsnAgAclGblCurRowIndex | read-only | mandatory | The current row index of the ACL table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2 | TablesnAgAclTable | not-accessible | mandatory | Table of Access Control List |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1 | RowsnAgAclEntry | not-accessible | mandatory | An entry in the IP access control list table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.1 | ColumnsnAgAclIndex | read-only | mandatory | The access control list item number for an entry. This is a unique number that identifies different Access list entries combined with the access list name and … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.2 | ColumnsnAgAclNumber | read-write | mandatory | The access control list number for an entry. The standard access list is in the range <1..99>. The extended access list is in the range <100-199>. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.3 | ColumnsnAgAclName | read-write | mandatory | ACL name for an entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.4 | ColumnsnAgAclAction | read-write | mandatory | Action to take if the ip packet matches with this access control list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.5 | ColumnsnAgAclProtocol | read-write | mandatory | Transport protocol. 0 means any protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.6 | ColumnsnAgAclSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7 | ColumnsnAgAclSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.8 | ColumnsnAgAclSourceOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.9 | ColumnsnAgAclSourceOperand1 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.10 | ColumnsnAgAclSourceOperand2 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.11 | ColumnsnAgAclDestinationIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.12 | ColumnsnAgAclDestinationMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.13 | ColumnsnAgAclDestinationOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.14 | ColumnsnAgAclDestinationOperand1 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.15 | ColumnsnAgAclDestinationOperand2 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.16 | ColumnsnAgAclPrecedence | read-write | mandatory | This refers to IP precedence value in the range <0-7> critical(5), flash(3), flash-override(4), immediate(2), internet(6), network(7), priority(1), routine(0) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.17 | ColumnsnAgAclTos | read-write | mandatory | This refers to the IP type of service value in range <0-15> which is the sum of numeric vlaues of the following options - match packets with maximum reliabilit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.18 | ColumnsnAgAclEstablished | read-write | mandatory | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.19 | ColumnsnAgAclLogOption | read-write | mandatory | Log flag |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.20 | ColumnsnAgAclStandardFlag | read-write | mandatory | Return whether the ACL is standard or extended, 1 for standard ACL |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.21 | ColumnsnAgAclRowStatus | read-write | mandatory | To create or delete a access list entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.22 | ColumnsnAgAclFlowCounter | read-only | mandatory | Approximate count of flows matching individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.23 | ColumnsnAgAclPacketCounter | read-only | mandatory | Accurate count of packets matching individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.24 | ColumnsnAgAclComments | read-write | mandatory | Remark description of individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.25 | ColumnsnAgAclIpPriority | read-write | mandatory | QoS priority option for IP ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.26 | ColumnsnAgAclPriorityForce | read-write | mandatory | Force packet outgoing priority. Not defined(4) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.27 | ColumnsnAgAclPriorityMapping | read-write | mandatory | Map incoming packet priority. Not defined(8) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.28 | ColumnsnAgAclDscpMarking | read-write | mandatory | Mark packets with given DSCP value. Not defined(64) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.29 | ColumnsnAgAclDscpMapping | read-write | mandatory | Map incoming DSCP value. Not defined(64) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3 | TablesnAgAclBindToPortTable | not-accessible | mandatory | Table of ACL binding to port for router |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1 | RowsnAgAclBindToPortEntry | not-accessible | mandatory | An entry in the ACL-binding-to-port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.1 | ColumnsnAgAclPortNum | read-only | mandatory | Binding-to port num, either physical port or virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.2 | ColumnsnAgAclPortBindDirection | read-only | mandatory | ACL port direction, inbound or outbound |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.3 | ColumnsnAgAclNum | read-write | mandatory | Defined ACL number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.4 | ColumnsnAgAclNameString | read-write | mandatory | Defined ACL name |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.5 | ColumnsnAgBindPortListInVirtualInterface | read-write | mandatory | Port list for binding virtual interface |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.6 | ColumnsnAgAclPortRowStatus | read-write | mandatory | To create or delete a ACL port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16 | TablesnIpAsPathAccessListStringTable | not-accessible | mandatory | Ip As-Path Access List table, string version. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1 | RowsnIpAsPathAccessListStringEntry | not-accessible | mandatory | An entry in the Ip As-Path Access List table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.1 | ColumnsnIpAsPathAccessListStringName | read-only | mandatory | The table index for a filter entry, string version. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.2 | ColumnsnIpAsPathAccessListStringSequence | read-only | mandatory | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.3 | ColumnsnIpAsPathAccessListStringAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.4 | ColumnsnIpAsPathAccessListStringRegExpression | read-write | mandatory | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.5 | ColumnsnIpAsPathAccessListStringRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17 | TablesnIpCommunityListStringTable | not-accessible | mandatory | Ip Community ListString table, string version. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1 | RowsnIpCommunityListStringEntry | not-accessible | mandatory | An entry in the Ip Community ListString table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.1 | ColumnsnIpCommunityListStringName | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.2 | ColumnsnIpCommunityListStringSequence | read-only | mandatory | The table sequence index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.3 | ColumnsnIpCommunityListStringAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.4 | ColumnsnIpCommunityListStringCommNum | read-write | mandatory | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.5 | ColumnsnIpCommunityListStringInternet | read-write | mandatory | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.6 | ColumnsnIpCommunityListStringNoAdvertise | read-write | mandatory | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.7 | ColumnsnIpCommunityListStringNoExport | read-write | mandatory | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.8 | ColumnsnIpCommunityListStringRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.9 | ColumnsnIpCommunityListStringLocalAs | read-write | mandatory | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18 | TablesnRtIpPortIfAddrTable | not-accessible | mandatory | IP port If address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1 | RowsnRtIpPortIfAddrEntry | not-accessible | mandatory | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.1 | ColumnsnRtIpPortIfAddrInterfaceIndex | read-only | mandatory | The InterfaceIndex for port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.2 | ColumnsnRtIpPortIfAddress | read-only | mandatory | The port IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.3 | ColumnsnRtIpPortIfSubnetMask | read-write | mandatory | The port IP address subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.4 | ColumnsnRtIpPortIfAddrType | read-write | mandatory | The port IP address type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.5 | ColumnsnRtIpPortIfRowStatus | read-write | mandatory | To create or delete a port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19 | TablesnRtIpPortIfAccessTable | not-accessible | mandatory | IP port If access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1 | RowsnRtIpPortIfAccessEntry | not-accessible | mandatory | An entry in the IP Port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.1 | ColumnsnRtIpPortIfAccessInterfaceIndex | read-only | mandatory | The InterfaceIndex for port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.2 | ColumnsnRtIpPortIfAccessDirection | read-only | mandatory | The incoming or outgoing check for port access. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.3 | ColumnsnRtIpPortIfAccessFilters | read-write | mandatory | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.4 | ColumnsnRtIpPortIfAccessRowStatus | read-write | mandatory | To create or delete a port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20 | TablesnRtIpPortIfConfigTable | not-accessible | mandatory | IP port If Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1 | RowsnRtIpPortIfConfigEntry | not-accessible | mandatory | An entry in the IP Port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.1 | ColumnsnRtIpPortIfConfigInterfaceIndex | read-only | mandatory | The If index for port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.2 | ColumnsnRtIpPortIfMtu | read-write | mandatory | The maximun transfer unit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.3 | ColumnsnRtIpPortIfEncap | read-write | mandatory | Data link encapsulation to be used on the IP frame transmitted on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.4 | ColumnsnRtIpPortIfMetric | read-write | mandatory | The metric. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.5 | ColumnsnRtIpPortIfDirBcastFwd | read-write | mandatory | Enable/Disable directed broadcast forwarding on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3 | NodesnRip | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1 | NodesnRtIpRipGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1 | ScalarsnRtIpRipEnable | read-write | mandatory | Enable/disable ip rip routing. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2 | ScalarsnRtIpRipUpdateTime | read-write | mandatory | Ip rip update interval in seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3 | ScalarsnRtIpRipRedisEnable | read-write | mandatory | Enable/disable redistribution to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4 | ScalarsnRtIpRipRedisDefMetric | read-write | mandatory | Default metric to be used when redistribute route to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5 | ScalarsnRtIpRipSetAllPortConfig | read-write | mandatory | The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6 | ScalarsnRtIpRipGblFiltList | read-write | mandatory | An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable wit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.7 | ScalarsnRtIpRipFiltOnAllPort | read-write | mandatory | Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8 | ScalarsnRtIpRipDistance | read-write | mandatory | Administration distance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2 | TablesnRtIpRipPortConfigTable | not-accessible | deprecated | IP Rip port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1 | RowsnRtIpRipPortConfigEntry | not-accessible | deprecated | An entry in the IP Rip Port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1 | ColumnsnRtIpRipPortConfigPortIndex | read-only | deprecated | The port index for ip rip port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2 | ColumnsnRtIpRipPortVersion | read-write | deprecated | The ip rip version on this port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3 | ColumnsnRtIpRipPortPoisonReverse | read-write | deprecated | Enable/disable poison reverse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4 | ColumnsnRtIpRipPortLearnDefault | read-write | deprecated | Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enable… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3 | TablesnRtIpRipRedisTable | not-accessible | mandatory | IP Rip Redistribution table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1 | RowsnRtIpRipRedisEntry | not-accessible | mandatory | An entry in the IP Rip Redistribution table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1 | ColumnsnRtIpRipRedisIndex | read-only | mandatory | The table index for a IP Rip Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2 | ColumnsnRtIpRipRedisAction | read-write | mandatory | The action to take when match this IP Rip Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3 | ColumnsnRtIpRipRedisProtocol | read-write | mandatory | The protocol to be distributed. other(1) cannot be used for SNMP-SET. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4 | ColumnsnRtIpRipRedisIp | read-write | mandatory | The ip address of the ip route to be distributed. 0.0.0.0 - all routes |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5 | ColumnsnRtIpRipRedisMask | read-write | mandatory | The ip subnet mask of the ip route to be distributed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6 | ColumnsnRtIpRipRedisMatchMetric | read-write | mandatory | The metric of the route to be matched to determine the redistribution. 0 - any metric value |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7 | ColumnsnRtIpRipRedisSetMetric | read-write | mandatory | The new metric of the route to be advertised. 0 - use the default metric. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8 | ColumnsnRtIpRipRedisRowStatus | read-write | mandatory | To create or delete a Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4 | TablesnRtIpRipRouteFilterTable | not-accessible | mandatory | ip rip route filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1 | RowsnRtIpRipRouteFilterEntry | not-accessible | mandatory | An entry of the ip rip route filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1 | ColumnsnRtIpRipRouteFilterId | read-only | mandatory | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2 | ColumnsnRtIpRipRouteFilterAction | read-write | mandatory | Action to take if the ip rip packet matched with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3 | ColumnsnRtIpRipRouteFilterIpAddr | read-write | mandatory | Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip pa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4 | ColumnsnRtIpRipRouteFilterSubnetMask | read-write | mandatory | Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5 | ColumnsnRtIpRipRouteFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5 | TablesnRtIpRipNbrFilterTable | not-accessible | mandatory | ip rip neighbor filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1 | RowsnRtIpRipNbrFilterEntry | not-accessible | mandatory | An entry of the ip rip neighbor filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1 | ColumnsnRtIpRipNbrFilterId | read-only | mandatory | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2 | ColumnsnRtIpRipNbrFilterAction | read-write | mandatory | Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3 | ColumnsnRtIpRipNbrFilterSourceIp | read-write | mandatory | Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip p… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4 | ColumnsnRtIpRipNbrFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6 | TablesnRtIpRipPortAccessTable | not-accessible | deprecated | ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1 | RowsnRtIpRipPortAccessEntry | not-accessible | deprecated | An entry of the ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1 | ColumnsnRtIpRipPortAccessPort | read-only | deprecated | The ip interface to which the rip filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2 | ColumnsnRtIpRipPortAccessDir | read-only | deprecated | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3 | ColumnsnRtIpRipPortAccessFilterList | read-write | deprecated | An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4 | ColumnsnRtIpRipPortAccessRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7 | TablesnRtIpRipPortIfConfigTable | not-accessible | mandatory | IP Rip port If Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1 | RowsnRtIpRipPortIfConfigEntry | not-accessible | mandatory | An entry in the IP Rip Port If Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.1 | ColumnsnRtIpRipPortIfConfigInterfaceIndex | read-only | mandatory | The If index for ip rip port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.2 | ColumnsnRtIpRipPortIfVersion | read-write | mandatory | The ip rip version on this port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.3 | ColumnsnRtIpRipPortIfPoisonReverse | read-write | mandatory | Enable/disable poison reverse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.4 | ColumnsnRtIpRipPortIfLearnDefault | read-write | mandatory | Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enable… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8 | TablesnRtIpRipPortIfAccessTable | not-accessible | mandatory | ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1 | RowsnRtIpRipPortIfAccessEntry | not-accessible | mandatory | An entry of the ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.1 | ColumnsnRtIpRipPortIfAccessPort | read-only | mandatory | The ip interface to which the rip filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.2 | ColumnsnRtIpRipPortIfAccessDir | read-only | mandatory | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.3 | ColumnsnRtIpRipPortIfAccessFilterList | read-write | mandatory | An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.4 | ColumnsnRtIpRipPortIfAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4 | NodesnOspf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1 | NodesnOspfGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.1 | ScalarsnOspfRouterId | read-write | mandatory | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.2 | ScalarsnOspfAdminStat | read-write | mandatory | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.3 | ScalarsnOspfASBdrRtrStatus | read-write | mandatory | A flag to note whether this router is an Autonomous System border router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.4 | ScalarsnOspfRedisMode | read-write | mandatory | The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.5 | ScalarsnOspfDefaultOspfMetricValue | read-write | mandatory | The metric of using a default OSPF Metric value on this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.6 | ScalarsnOspfExternLSACount | read-only | mandatory | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.7 | ScalarsnOspfExternLSACksumSum | read-only | mandatory | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.8 | ScalarsnOspfOriginateNewLSAs | read-only | mandatory | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.9 | ScalarsnOspfRxNewLSAs | read-only | mandatory | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.10 | ScalarsnOspfOspfRedisMetricType | read-write | mandatory | type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.11 | ScalarsnOspfExtLsdbLimit | read-write | mandatory | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.12 | ScalarsnOspfExitOverflowInterval | read-write | mandatory | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.13 | ScalarsnOspfRfc1583Compatibility | read-write | mandatory | This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.14 | ScalarsnOspfRouterIdFormat | read-write | mandatory | This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.15 | ScalarsnOspfDistance | read-write | obsolete | OSPF Adminitrative distance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.16 | ScalarsnOspfDistanceIntra | read-write | mandatory | OSPF Adminitrative distance - Intra Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.17 | ScalarsnOspfDistanceInter | read-write | mandatory | OSPF Adminitrative distance - Inter Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.18 | ScalarsnOspfDistanceExternal | read-write | mandatory | OSPF Adminitrative distance - External. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2 | NodesnOspfArea | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1 | TablesnOspfAreaTable | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1 | RowsnOspfAreaEntry | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.1 | ColumnsnOspfAreaId | read-only | mandatory | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.2 | ColumnsnOspfImportASExtern | read-write | mandatory | The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.3 | ColumnsnOspfStubMetric | read-write | mandatory | The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to ot… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.4 | ColumnsnOspfAreaRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.5 | ColumnsnOspfAreaIdFormat | read-write | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3 | NodesnOspfAddrRange | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1 | TablesnOspfAreaRangeTable | not-accessible | mandatory | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1 | RowsnOspfAreaRangeEntry | not-accessible | mandatory | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.1 | ColumnsnOspfAreaRangeAreaID | read-only | mandatory | The Area the Address Range is to be found within. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.2 | ColumnsnOspfAreaRangeNet | read-only | mandatory | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.3 | ColumnsnOspfAreaRangeMask | read-write | mandatory | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.4 | ColumnsnOspfAreaRangeRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.5 | ColumnsnOspfAreaRangeAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4 | NodesnOspfIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1 | TablesnOspfIfTable | not-accessible | deprecated | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1 | RowsnOspfIfEntry | not-accessible | deprecated | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.1 | ColumnsnOspfIfPort | read-only | deprecated | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.2 | ColumnsnOspfIfAreaId | read-write | deprecated | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.3 | ColumnsnOspfIfAdminStat | read-write | deprecated | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.4 | ColumnsnOspfIfRtrPriority | read-write | deprecated | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.5 | ColumnsnOspfIfTransitDelay | read-write | deprecated | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.6 | ColumnsnOspfIfRetransInterval | read-write | deprecated | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.7 | ColumnsnOspfIfHelloInterval | read-write | deprecated | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.8 | ColumnsnOspfIfRtrDeadInterval | read-write | deprecated | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.9 | ColumnsnOspfIfAuthType | read-write | deprecated | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.10 | ColumnsnOspfIfAuthKey | read-write | deprecated | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.11 | ColumnsnOspfIfMetricValue | read-write | deprecated | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.12 | ColumnsnOspfIfRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.13 | ColumnsnOspfIfMd5AuthKeyId | read-write | deprecated | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.14 | ColumnsnOspfIfMd5AuthKey | read-write | deprecated | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.15 | ColumnsnOspfIfMd5ActivationWaitTime | read-write | deprecated | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.16 | ColumnsnOspfIfAreaIdFormat | read-only | deprecated | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.17 | ColumnsnOspfIfPassiveMode | read-write | deprecated | This object control the passive mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.18 | ColumnsnOspfIfDatabaseFilterAllOut | read-write | deprecated | This object control the filtering of outgoing OSPF LSA on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.19 | ColumnsnOspfIfMtuIgnore | read-write | deprecated | This object control MTU detection mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.20 | ColumnsnOspfIfNetworkP2mp | read-write | deprecated | This object enable/disable P2MP mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2 | TablesnOspfIf2Table | not-accessible | mandatory | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1 | RowsnOspfIf2Entry | not-accessible | mandatory | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.1 | ColumnsnOspfIf2Port | read-only | mandatory | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.2 | ColumnsnOspfIf2AreaId | read-write | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.3 | ColumnsnOspfIf2AdminStat | read-write | mandatory | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.4 | ColumnsnOspfIf2RtrPriority | read-write | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.5 | ColumnsnOspfIf2TransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.6 | ColumnsnOspfIf2RetransInterval | read-write | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.7 | ColumnsnOspfIf2HelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.8 | ColumnsnOspfIf2RtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.9 | ColumnsnOspfIf2AuthType | read-write | mandatory | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.10 | ColumnsnOspfIf2AuthKey | read-write | mandatory | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.11 | ColumnsnOspfIf2MetricValue | read-write | mandatory | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.12 | ColumnsnOspfIf2RowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.13 | ColumnsnOspfIf2Md5AuthKeyId | read-write | mandatory | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.14 | ColumnsnOspfIf2Md5AuthKey | read-write | mandatory | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.15 | ColumnsnOspfIf2Md5ActivationWaitTime | read-write | mandatory | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.16 | ColumnsnOspfIf2AreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.17 | ColumnsnOspfIf2PassiveMode | read-write | mandatory | This object control the passive mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.18 | ColumnsnOspfIf2DatabaseFilterAllOut | read-write | mandatory | This object control the filtering of outgoing OSPF LSA on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.19 | ColumnsnOspfIf2MtuIgnore | read-write | mandatory | This object control MTU detection mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.20 | ColumnsnOspfIf2NetworkP2mp | read-write | mandatory | This object enable/disable P2MP mode of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5 | NodesnOspfVirtIf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1 | TablesnOspfVirtIfTable | not-accessible | mandatory | Information about this router's virtual interfaces. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1 | RowsnOspfVirtIfEntry | not-accessible | mandatory | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.1 | ColumnsnOspfVirtIfAreaID | read-only | mandatory | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.2 | ColumnsnOspfVirtIfNeighbor | read-only | mandatory | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.3 | ColumnsnOspfVirtIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.4 | ColumnsnOspfVirtIfRetransInterval | read-write | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.5 | ColumnsnOspfVirtIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.6 | ColumnsnOspfVirtIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.7 | ColumnsnOspfVirtIfAuthType | read-write | mandatory | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.8 | ColumnsnOspfVirtIfAuthKey | read-write | mandatory | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.9 | ColumnsnOspfVirtIfRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.10 | ColumnsnOspfVirtIfMd5AuthKeyId | read-write | mandatory | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.11 | ColumnsnOspfVirtIfMd5AuthKey | read-write | mandatory | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.12 | ColumnsnOspfVirtIfMd5ActivationWaitTime | read-write | mandatory | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.13 | ColumnsnOspfVirtIfAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6 | NodesnOspfRedis | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1 | TablesnOspfRedisTable | not-accessible | mandatory | The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1 | RowsnOspfRedisEntry | not-accessible | mandatory | The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.1 | ColumnsnOspfRedisIndex | read-only | mandatory | The destination IP address that associates with this particular route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.2 | ColumnsnOspfRedisIpAddress | read-write | mandatory | The destination IP address that associates with this particular route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.3 | ColumnsnOspfRedisMask | read-write | mandatory | The Subnet Mask that pertains to this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.4 | ColumnsnOspfRedisAction | read-write | mandatory | The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF D… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.5 | ColumnsnOspfRedisProtocol | read-write | mandatory | The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.6 | ColumnsnOspfRedisSetOspfMetric | read-write | mandatory | The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metri… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.7 | ColumnsnOspfRedisOspfMetricValue | read-write | mandatory | The metric of using OSPF Metric value on this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.8 | ColumnsnOspfRedisMatchRipMetric | read-write | mandatory | The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.9 | ColumnsnOspfRedisRipMetricValue | read-write | mandatory | The metric of using RIP Metric value (1 to 15 hops) on this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.10 | ColumnsnOspfRedisRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7 | NodesnOspfNbr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1 | TablesnOspfNbrTable | not-accessible | mandatory | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1 | RowsnOspfNbrEntry | not-accessible | mandatory | The information regarding a single neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.1 | ColumnsnOspfNbrEntryIndex | read-only | mandatory | The table entry index of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.2 | ColumnsnOspfNbrPort | read-only | mandatory | The physical port of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.3 | ColumnsnOspfNbrIpAddr | read-only | mandatory | The IP address of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.4 | ColumnsnOspfNbrIndex | read-only | mandatory | The neighbor index of each port and each IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.5 | ColumnsnOspfNbrRtrId | read-only | mandatory | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.6 | ColumnsnOspfNbrOptions | read-only | mandatory | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.7 | ColumnsnOspfNbrPriority | read-only | mandatory | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.8 | ColumnsnOspfNbrState | read-only | mandatory | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.9 | ColumnsnOspfNbrEvents | read-only | mandatory | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.10 | ColumnsnOspfNbrLsRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8 | NodesnOspfVirtNbr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1 | TablesnOspfVirtNbrTable | not-accessible | mandatory | A table of virtual neighbor information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1 | RowsnOspfVirtNbrEntry | not-accessible | mandatory | Virtual neighbor information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.1 | ColumnsnOspfVirtNbrEntryIndex | read-only | mandatory | The table entry index of this virtual neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.2 | ColumnsnOspfVirtNbrArea | read-only | mandatory | The Transit Area Identifier. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.3 | ColumnsnOspfVirtNbrRtrId | read-only | mandatory | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.4 | ColumnsnOspfVirtNbrIpAddr | read-only | mandatory | The IP address this Virtual Neighbor is using. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.5 | ColumnsnOspfVirtNbrOptions | read-only | mandatory | A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.6 | ColumnsnOspfVirtNbrState | read-only | mandatory | The state of the Virtual Neighbor Relationship. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.7 | ColumnsnOspfVirtNbrEvents | read-only | mandatory | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.8 | ColumnsnOspfVirtNbrLSRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.9 | ColumnsnOspfVirtNbrAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9 | NodesnOspfLsdb | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1 | TablesnOspfLsdbTable | not-accessible | mandatory | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1 | RowsnOspfLsdbEntry | not-accessible | mandatory | A single Link State Advertisement. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.1 | ColumnsnOspfLsdbEntryIndex | read-only | mandatory | The table entry index of this Link State Database. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.2 | ColumnsnOspfLsdbAreaId | read-only | mandatory | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.3 | ColumnsnOspfLsdbType | read-only | mandatory | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.4 | ColumnsnOspfLsdbLsId | read-only | mandatory | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.5 | ColumnsnOspfLsdbRouterId | read-only | mandatory | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.6 | ColumnsnOspfLsdbSequence | read-only | mandatory | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.7 | ColumnsnOspfLsdbAge | read-only | mandatory | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.8 | ColumnsnOspfLsdbChecksum | read-only | mandatory | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.9 | ColumnsnOspfLsdbAdvertisement | read-only | mandatory | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.10 | ColumnsnOspfLsdbAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10 | NodesnOspfExtLsdb | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1 | TablesnOspfExtLsdbTable | not-accessible | mandatory | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1 | RowsnOspfExtLsdbEntry | not-accessible | mandatory | A single Link State Advertisement. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.1 | ColumnsnOspfExtLsdbEntryIndex | read-only | mandatory | The table entry index of this Link State Database. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.2 | ColumnsnOspfExtLsdbType | read-only | mandatory | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.3 | ColumnsnOspfExtLsdbLsId | read-only | mandatory | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.4 | ColumnsnOspfExtLsdbRouterId | read-only | mandatory | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.5 | ColumnsnOspfExtLsdbSequence | read-only | mandatory | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.6 | ColumnsnOspfExtLsdbAge | read-only | mandatory | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.7 | ColumnsnOspfExtLsdbChecksum | read-only | mandatory | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.8 | ColumnsnOspfExtLsdbAdvertisement | read-only | mandatory | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11 | NodesnOspfAreaStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1 | TablesnOspfAreaStatusTable | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1 | RowsnOspfAreaStatusEntry | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.1 | ColumnsnOspfAreaStatusEntryIndex | read-only | mandatory | The table entry index of this Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.2 | ColumnsnOspfAreaStatusAreaId | read-only | mandatory | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.3 | ColumnsnOspfAreaStatusImportASExtern | read-only | mandatory | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.4 | ColumnsnOspfAreaStatusStubMetric | read-only | mandatory | The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to ot… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.5 | ColumnsnOspfAreaStatusSpfRuns | read-only | mandatory | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.6 | ColumnsnOspfAreaStatusAreaBdrRtrCount | read-only | mandatory | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.7 | ColumnsnOspfAreaStatusASBdrRtrCount | read-only | mandatory | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.8 | ColumnsnOspfAreaStatusLSACount | read-only | mandatory | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.9 | ColumnsnOspfAreaStatusLSACksumSum | read-only | mandatory | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) lin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.10 | ColumnsnOspfAreaStatusAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12 | NodesnOspfIfStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1 | TablesnOspfIfStatusTable | not-accessible | mandatory | The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1 | RowsnOspfIfStatusEntry | not-accessible | mandatory | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1 | ColumnsnOspfIfStatusEntryIndex | read-only | mandatory | The table entry index of this Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2 | ColumnsnOspfIfStatusPort | read-only | mandatory | The physical router port of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3 | ColumnsnOspfIfStatusIpAddress | read-only | mandatory | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4 | ColumnsnOspfIfStatusAreaId | read-only | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.5 | ColumnsnOspfIfStatusType | read-only | mandatory | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6 | ColumnsnOspfIfStatusAdminStat | read-only | mandatory | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7 | ColumnsnOspfIfStatusRtrPriority | read-only | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8 | ColumnsnOspfIfStatusTransitDelay | read-only | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9 | ColumnsnOspfIfStatusRetransInterval | read-only | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10 | ColumnsnOspfIfStatusHelloInterval | read-only | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11 | ColumnsnOspfIfStatusRtrDeadInterval | read-only | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12 | ColumnsnOspfIfStatusState | read-only | mandatory | The OSPF Interface State. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13 | ColumnsnOspfIfStatusDesignatedRouter | read-only | mandatory | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14 | ColumnsnOspfIfStatusBackupDesignatedRouter | read-only | mandatory | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15 | ColumnsnOspfIfStatusEvents | read-only | mandatory | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16 | ColumnsnOspfIfStatusAuthType | read-only | mandatory | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17 | ColumnsnOspfIfStatusAuthKey | read-only | mandatory | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18 | ColumnsnOspfIfStatusMetricValue | read-only | mandatory | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19 | ColumnsnOspfIfStatusMd5AuthKeyId | read-only | mandatory | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20 | ColumnsnOspfIfStatusMd5AuthKey | read-only | mandatory | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21 | ColumnsnOspfIfStatusMd5ActivationWaitTime | read-only | mandatory | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22 | ColumnsnOspfIfStatusAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13 | NodesnOspfVirtIfStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1 | TablesnOspfVirtIfStatusTable | not-accessible | mandatory | Information about this router's virtual interfaces. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1 | RowsnOspfVirtIfStatusEntry | not-accessible | mandatory | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.1 | ColumnsnOspfVirtIfStatusEntryIndex | read-only | mandatory | The table entry index of this Area. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.2 | ColumnsnOspfVirtIfStatusAreaID | read-only | mandatory | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.3 | ColumnsnOspfVirtIfStatusNeighbor | read-only | mandatory | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.4 | ColumnsnOspfVirtIfStatusTransitDelay | read-only | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.5 | ColumnsnOspfVirtIfStatusRetransInterval | read-only | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.6 | ColumnsnOspfVirtIfStatusHelloInterval | read-only | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.7 | ColumnsnOspfVirtIfStatusRtrDeadInterval | read-only | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.8 | ColumnsnOspfVirtIfStatusState | read-only | mandatory | The OSPF virtual interfaces states. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.9 | ColumnsnOspfVirtIfStatusEvents | read-only | mandatory | The number of state changes or error events on this Virtual Link. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.10 | ColumnsnOspfVirtIfStatusAuthType | read-only | mandatory | The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.11 | ColumnsnOspfVirtIfStatusAuthKey | read-only | mandatory | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.12 | ColumnsnOspfVirtIfStatusMd5AuthKeyId | read-only | mandatory | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.13 | ColumnsnOspfVirtIfStatusMd5AuthKey | read-only | mandatory | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.14 | ColumnsnOspfVirtIfStatusMd5ActivationWaitTime | read-only | mandatory | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.15 | ColumnsnOspfVirtIfStatusAreaIdFormat | read-only | mandatory | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipA… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14 | NodesnOspfRoutingInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1 | TablesnOspfRoutingInfoTable | not-accessible | mandatory | Information about this router's routing information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1 | RowsnOspfRoutingInfoEntry | not-accessible | mandatory | Information about a single ABR/ASBR Routing entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.1 | ColumnsnOspfRoutingInfoIndex | read-only | mandatory | The table entry index of this Routing entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.2 | ColumnsnOspfRoutingInfoRouterID | read-only | mandatory | The Router ID of the destination router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.3 | ColumnsnOspfRoutingInfoRouterType | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.4 | ColumnsnOspfRoutingInfoNextHopRouterID | read-only | mandatory | The router ID of the next hop destination router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.5 | ColumnsnOspfRoutingInfoOutgoingInterface | read-only | mandatory | The outgoing interface of the destination router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15 | NodesnOspfTrapControl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.1 | ScalarsnOspfSetTrap | read-write | mandatory | A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.2 | ScalarsnOspfConfigErrorType | read-only | mandatory | Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.3 | ScalarsnOspfPacketType | read-only | mandatory | OSPF packet types. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.4 | ScalarsnOspfPacketSrc | read-only | mandatory | The IP address of an inbound packet that can- not be identified by a neighbor instance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.5 | ScalarsnOspfTrapsGenerationMode | read-write | mandatory | Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5 | NodesnDvmrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1 | NodesnDvmrpMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.1 | ScalarsnDvmrpVersion | read-only | mandatory | The router's DVMRP version information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.2 | ScalarsnDvmrpEnable | read-write | mandatory | Enable or disable DVMRP on this router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.3 | ScalarsnDvmrpGenerationId | read-only | mandatory | The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.4 | ScalarsnDvmrpProbeInterval | read-write | mandatory | This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'ena… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.5 | ScalarsnDvmrpReportInterval | read-write | mandatory | This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.6 | ScalarsnDvmrpTriggerInterval | read-write | mandatory | This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.7 | ScalarsnDvmrpNeighborRouterTimeout | read-write | mandatory | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this objec… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.8 | ScalarsnDvmrpRouteExpireTime | read-write | mandatory | This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.9 | ScalarsnDvmrpRouteDiscardTime | read-write | mandatory | This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.10 | ScalarsnDvmrpPruneAge | read-write | mandatory | This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.11 | ScalarsnDvmrpGraftRetransmitTime | read-write | mandatory | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 | ScalarsnDvmrpDefaultRoute | read-write | mandatory | This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this defa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13 | TablesnDvmrpVInterfaceTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1 | RowsnDvmrpVInterfaceEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1 | ColumnsnDvmrpVInterfaceVifIndex | read-only | mandatory | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2 | ColumnsnDvmrpVInterfaceType | read-write | mandatory | The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are n… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3 | ColumnsnDvmrpVInterfaceOperState | read-only | mandatory | The current operational state of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4 | ColumnsnDvmrpVInterfaceLocalAddress | read-write | mandatory | The IP address of the local end of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5 | ColumnsnDvmrpVInterfaceRemoteAddress | read-write | mandatory | The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the sub… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6 | ColumnsnDvmrpVInterfaceRemoteSubnetMask | read-only | mandatory | The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7 | ColumnsnDvmrpVInterfaceMetric | read-write | mandatory | The distance metric for this DVMRP virtual interface which is used to calculate distance vectors. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8 | ColumnsnDvmrpVInterfaceTtlThreshold | read-write | mandatory | This is the minimum time-to-live value to forward the packets out of this virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9 | ColumnsnDvmrpVInterfaceAdvertiseLocal | read-write | mandatory | Enable or disable the advertising of this local route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10 | ColumnsnDvmrpVInterfaceEncapsulation | read-write | mandatory | Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11 | ColumnsnDvmrpVInterfaceStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14 | TablesnDvmrpNeighborTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this ta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1 | RowsnDvmrpNeighborEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpNeighborTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1 | ColumnsnDvmrpNeighborEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2 | ColumnsnDvmrpNeighborVifIndex | read-only | mandatory | The value of VifIndex for the virtual interface used to reach this DVMRP neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3 | ColumnsnDvmrpNeighborAddress | read-only | mandatory | The IP address of the DVMRP neighbor for which this entry contains information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4 | ColumnsnDvmrpNeighborUpTime | read-only | mandatory | The time since this DVMRP neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5 | ColumnsnDvmrpNeighborExpiryTime | read-only | mandatory | The minimum time remaining before this DVMRP neighbor will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6 | ColumnsnDvmrpNeighborGenerationId | read-only | mandatory | The neighboring router's generation identifier. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7 | ColumnsnDvmrpNeighborMajorVersion | read-only | mandatory | The neighboring router's major DVMRP version number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8 | ColumnsnDvmrpNeighborMinorVersion | read-only | mandatory | The neighboring router's minor DVMRP version number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9 | ColumnsnDvmrpNeighborCapabilities | read-only | mandatory | This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning 3 mtrace bit 2 generationID bit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15 | TablesnDvmrpRouteTable | not-accessible | mandatory | The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1 | RowsnDvmrpRouteEntry | not-accessible | mandatory | An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1 | ColumnsnDvmrpRouteEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2 | ColumnsnDvmrpRouteSource | read-only | mandatory | The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3 | ColumnsnDvmrpRouteSourceMask | read-only | mandatory | The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4 | ColumnsnDvmrpRouteUpstreamNeighbor | read-only | mandatory | The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5 | ColumnsnDvmrpRouteVifIndex | read-only | mandatory | The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6 | ColumnsnDvmrpRouteMetric | read-only | mandatory | The distance in hops to the source subnet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7 | ColumnsnDvmrpRouteExpiryTime | read-only | mandatory | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16 | TablesnDvmrpRouteNextHopTable | not-accessible | mandatory | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' befor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1 | RowsnDvmrpRouteNextHopEntry | not-accessible | mandatory | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1 | ColumnsnDvmrpRouteNextHopSource | read-only | mandatory | The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a n… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2 | ColumnsnDvmrpRouteNextHopSourceMask | read-only | mandatory | The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3 | ColumnsnDvmrpRouteNextHopVifIndex | read-only | mandatory | The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4 | ColumnsnDvmrpRouteNextHopType | read-only | mandatory | Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17 | TablesnDvmrpVIfStatTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1 | RowsnDvmrpVIfStatEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpVIfStatTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1 | ColumnsnDvmrpVIfStatVifIndex | read-only | mandatory | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2 | ColumnsnDvmrpVIfStatInPkts | read-only | mandatory | The number of packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3 | ColumnsnDvmrpVIfStatOutPkts | read-only | mandatory | The number of packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4 | ColumnsnDvmrpVIfStatInOctets | read-only | mandatory | The number of octets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5 | ColumnsnDvmrpVIfStatOutOctets | read-only | mandatory | The number of octets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6 | ColumnsnDvmrpVIfStatInProbePkts | read-only | mandatory | The number of probe packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7 | ColumnsnDvmrpVIfStatOutProbePkts | read-only | mandatory | The number of probe packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8 | ColumnsnDvmrpVIfStatDiscardProbePkts | read-only | mandatory | The number of probe packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9 | ColumnsnDvmrpVIfStatInRtUpdatePkts | read-only | mandatory | The number of route update packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10 | ColumnsnDvmrpVIfStatOutRtUpdatePkts | read-only | mandatory | The number of route update packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11 | ColumnsnDvmrpVIfStatDiscardRtUpdatePkts | read-only | mandatory | The number of route update packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12 | ColumnsnDvmrpVIfStatInGraftPkts | read-only | mandatory | The number of graft packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13 | ColumnsnDvmrpVIfStatOutGraftPkts | read-only | mandatory | The number of graft packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14 | ColumnsnDvmrpVIfStatDiscardGraftPkts | read-only | mandatory | The number of graft packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15 | ColumnsnDvmrpVIfStatInGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16 | ColumnsnDvmrpVIfStatOutGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17 | ColumnsnDvmrpVIfStatDiscardGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18 | ColumnsnDvmrpVIfStatInPrunePkts | read-only | mandatory | The number of prune packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19 | ColumnsnDvmrpVIfStatOutPrunePkts | read-only | mandatory | The number of prune packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20 | ColumnsnDvmrpVIfStatDiscardPrunePkts | read-only | mandatory | The number of prune packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6 | NodesnIgmp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1 | NodesnIgmpMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1 | ScalarsnIgmpQueryInterval | read-write | mandatory | This is the time interval at which this entity sends out IGMP host query packets. For a router, snDvmrpEnable must have been set to 'enabled' before this objec… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.2 | ScalarsnIgmpGroupMembershipTime | read-write | mandatory | This is the time interval after which a group is considered inactive. For a router, snDvmrpEnable must have been set to 'enabled' before this object is writen.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3 | TablesnIgmpIfTable | not-accessible | mandatory | This table comprises of a list of IGMP interface entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1 | RowsnIgmpIfEntry | not-accessible | mandatory | An entry (conceptual row) contains the group membership information for that port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.1 | ColumnsnIgmpIfEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.2 | ColumnsnIgmpIfPortNumber | read-only | mandatory | This is the interface on which the group was learnt. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.3 | ColumnsnIgmpIfGroupAddress | read-only | mandatory | The group address learnt from the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.4 | ColumnsnIgmpIfGroupAge | read-only | mandatory | This is the interval (seconds) after which the group information will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4 | TablesnIgmpStaticGroupTable | not-accessible | mandatory | This table comprises of a list of IGMP static group entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1 | RowsnIgmpStaticGroupEntry | not-accessible | mandatory | An entry (conceptual row) contains the IGMP static group membership information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.1 | ColumnsnIgmpStaticGroupIfIndex | read-only | mandatory | The interface of which the static group was configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.2 | ColumnsnIgmpStaticGroupAddress | read-only | mandatory | The group address of which the static group was configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.3 | ColumnsnIgmpStaticGroupPortList | read-write | mandatory | A list of ports which are the port membership of the static group. Each port is a 16-bit integer ifIndex. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.4 | ColumnsnIgmpStaticGroupRowStatus | read-write | mandatory | To create or delete a static group entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7 | NodesnFsrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1 | NodesnFsrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.1 | ScalarsnFsrpGroupOperMode | read-write | mandatory | The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.2 | ScalarsnFsrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2 | NodesnFsrpIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1 | TablesnFsrpIfTable | not-accessible | mandatory | The FSRP Interface Table describes the interfaces from the viewpoint of FSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1 | RowsnFsrpIfEntry | not-accessible | mandatory | The FSRP Interface Entry describes one interface from the viewpoint of FSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1 | ColumnsnFsrpIfPort | read-only | mandatory | The physical router port of this FSRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2 | ColumnsnFsrpIfIpAddress | read-only | mandatory | The IP Address of the physical router port of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3 | ColumnsnFsrpIfVirRtrIpAddr | read-write | mandatory | The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4 | ColumnsnFsrpIfOtherRtrIpAddr | read-write | mandatory | The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5 | ColumnsnFsrpIfPreferLevel | read-write | mandatory | The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6 | ColumnsnFsrpIfTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7 | ColumnsnFsrpIfRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8 | ColumnsnFsrpIfState | read-only | mandatory | This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. act… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9 | ColumnsnFsrpIfKeepAliveTime | read-write | mandatory | The heart-beat is from 1 to 120 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10 | ColumnsnFsrpIfRouterDeadTime | read-write | mandatory | The hold time of the Fsrp router is from 3 to 255 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11 | ColumnsnFsrpIfChassisTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.12 | ColumnsnFsrpIfTrackPortList | read-write | mandatory | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.8 | NodesnGblRt | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1 | NodesnGblRtGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1.1 | ScalarsnGblRtRouteOnly | read-write | mandatory | If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If ro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9 | NodesnPim | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1 | NodesnPimMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.1 | ScalarsnPimEnable | read-write | mandatory | Enable or disable PIM on this router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.2 | ScalarsnPimNeighborRouterTimeout | read-write | mandatory | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.3 | ScalarsnPimHelloTime | read-write | mandatory | This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbour… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.4 | ScalarsnPimPruneTime | read-write | mandatory | This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.5 | ScalarsnPimGraftRetransmitTime | read-write | mandatory | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.6 | ScalarsnPimInactivityTime | read-write | mandatory | This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7 | TablesnPimVInterfaceTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1 | RowsnPimVInterfaceEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimVInterfaceTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1 | ColumnsnPimVInterfaceVifIndex | read-only | mandatory | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2 | ColumnsnPimVInterfaceType | read-write | mandatory | The type of PIM virtual interface, whether it uses a tunnel or a physical interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3 | ColumnsnPimVInterfaceLocalAddress | read-write | mandatory | The IP address of the local end of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4 | ColumnsnPimVInterfaceLocalSubnetMask | read-only | mandatory | The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5 | ColumnsnPimVInterfaceRemoteAddress | read-write | mandatory | The IP address of the remote end of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6 | ColumnsnPimVInterfaceDR | read-only | mandatory | The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7 | ColumnsnPimVInterfaceTtlThreshold | read-write | mandatory | This is the minimum time-to-live value to forward the packets out of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8 | ColumnsnPimVInterfaceStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.9 | ColumnsnPimVInterfaceMode | read-write | mandatory | The configured mode of this PIM interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8 | TablesnPimNeighborTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1 | RowsnPimNeighborEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimNeighborTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1 | ColumnsnPimNeighborEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2 | ColumnsnPimNeighborVifIndex | read-only | mandatory | The value of VifIndex for the virtual interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3 | ColumnsnPimNeighborAddress | read-only | mandatory | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4 | ColumnsnPimNeighborUpTime | read-only | mandatory | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5 | ColumnsnPimNeighborExpiryTime | read-only | mandatory | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9 | TablesnPimVIfStatTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1 | RowsnPimVIfStatEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimVIfStatTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1 | ColumnsnPimVIfStatVifIndex | read-only | mandatory | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2 | ColumnsnPimVIfStatInJoinPkts | read-only | mandatory | The number of join packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3 | ColumnsnPimVIfStatOutJoinPkts | read-only | mandatory | The number of join packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4 | ColumnsnPimVIfStatDiscardJoinPkts | read-only | mandatory | The number of join packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5 | ColumnsnPimVIfStatInPrunePkts | read-only | mandatory | The number of prune packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6 | ColumnsnPimVIfStatOutPrunePkts | read-only | mandatory | The number of prune packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7 | ColumnsnPimVIfStatDiscardPrunePkts | read-only | mandatory | The number of prune packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8 | ColumnsnPimVIfStatInAssertPkts | read-only | mandatory | The number of assert packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9 | ColumnsnPimVIfStatOutAssertPkts | read-only | mandatory | The number of assert packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10 | ColumnsnPimVIfStatDiscardAssertPkts | read-only | mandatory | The number of assert packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11 | ColumnsnPimVIfStatInHelloPkts | read-only | mandatory | The number of hello packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12 | ColumnsnPimVIfStatOutHelloPkts | read-only | mandatory | The number of hello packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13 | ColumnsnPimVIfStatDiscardHelloPkts | read-only | mandatory | The number of hello packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14 | ColumnsnPimVIfStatInGraftPkts | read-only | mandatory | The number of graft packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15 | ColumnsnPimVIfStatOutGraftPkts | read-only | mandatory | The number of graft packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16 | ColumnsnPimVIfStatDiscardGraftPkts | read-only | mandatory | The number of graft packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17 | ColumnsnPimVIfStatInGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18 | ColumnsnPimVIfStatOutGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19 | ColumnsnPimVIfStatDiscardGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2 | NodesnPimSMMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.1 | ScalarsnPimJoinPruneInterval | read-write | mandatory | The default interval in seconds at which periodic PIM-SM Join/Prune messages are to be sent. snPimEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2 | TablesnPimCandidateBSRTable | not-accessible | mandatory | Candidate Bootstrap Router information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1 | RowsnPimCandidateBSREntry | not-accessible | mandatory | An entry (conceptual row) in the snPimCandidateBSRTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.1 | ColumnsnPimCandidateBSRPortID | read-write | mandatory | The IP address of the PIM interface. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.2 | ColumnsnPimCandidateBSRIPAddress | read-only | mandatory | The (unicast) address of the Candidate BSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.3 | ColumnsnPimCandidateBSRHashMaskLen | read-write | mandatory | The hash mask value for this router as a candidate bootstrap router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.4 | ColumnsnPimCandidateBSRPreference | read-write | mandatory | The preference value for this router as a candidate bootstrap router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3 | TablesnPimRPSetTable | not-accessible | mandatory | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1 | RowsnPimRPSetEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimRPSetTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.1 | ColumnsnPimRPSetGroupAddress | read-only | mandatory | The IP multicast group address which, when combined with snPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candid… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.2 | ColumnsnPimRPSetMask | read-only | mandatory | The multicast group address mask which, when combined with snPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the C… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.3 | ColumnsnPimRPSetIPAddress | read-only | mandatory | The IP address of the Candidate-RP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.4 | ColumnsnPimRPSetHoldTime | read-only | mandatory | The holdtime, in seconds, of a Candidate-RP. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4 | TablesnPimCandidateRPTable | not-accessible | mandatory | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP. If this table is empty, then the lo… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1 | RowsnPimCandidateRPEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimCandidateRPTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.1 | ColumnsnPimCandidateRPGroupAddress | read-only | mandatory | The IP multicast group address which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.2 | ColumnsnPimCandidateRPMask | read-only | mandatory | The multicast group address mask which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itsel… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.3 | ColumnsnPimCandidateRPIPAddress | read-write | mandatory | The (unicast) address of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.4 | ColumnsnPimCandidateRPRowStatus | read-write | mandatory | The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the table … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10 | NodesnAppleTalk | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1 | NodesnRtATGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.1 | ScalarsnRtATRoutingEnable | read-write | mandatory | Enable/disable AppleTalk routing function on this box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.2 | ScalarsnRtATClearArpCache | read-write | mandatory | clear(1) will clear AppleTalk arp cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.3 | ScalarsnRtATClearFwdCache | read-write | mandatory | clear(1) will clear AppleTalk forward cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.4 | ScalarsnRtATClearRoute | read-write | mandatory | clear(1) will clear AppleTalk route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.5 | ScalarsnRtATClearTrafficCounters | read-write | mandatory | clear(1) will clear AppleTalk network statistics counters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.6 | ScalarsnRtATArpRetransmitCount | read-write | mandatory | The number of AppleTalk ARP request retransmits if the first request timeouts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.7 | ScalarsnRtATArpRetransmitInterval | read-write | mandatory | The waiting time interval for an AppleTalk ARP response before retransmission of an ARP request. Each unit value is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.8 | ScalarsnRtATGleanPacketsEnable | read-write | mandatory | Enable/disable AppleTalk glean packets function on this box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.9 | ScalarsnRtATRtmpUpdateInterval | read-write | mandatory | The periodic time interval to transmit a RTMP update. Each unit value is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.10 | ScalarsnRtATZipQueryInterval | read-write | mandatory | The periodic time interval to transmit a ZIP query. Each unit value is one second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.11 | ScalarsnRtATInRtmpPkts | read-only | mandatory | The total number of RTMP packets received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.12 | ScalarsnRtATOutRtmpPkts | read-only | mandatory | The total number of RTMP packets which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.13 | ScalarsnRtATFilteredRtmpPkts | read-only | mandatory | The total number of RTMP packets which were filtered by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.14 | ScalarsnRtATInZipPkts | read-only | mandatory | The total number of ZIP packets received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.15 | ScalarsnRtATOutZipPkts | read-only | mandatory | The total number of ZIP packets which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.16 | ScalarsnRtATInZipGZLPkts | read-only | mandatory | The total number of ZIP get zone list packets received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.17 | ScalarsnRtATOutZipGZLPkts | read-only | mandatory | The total number of ZIP get zone list packets which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.18 | ScalarsnRtATInZipNetInfoPkts | read-only | mandatory | The total number of ZIP network information packets received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.19 | ScalarsnRtATOutZipNetInfoPkts | read-only | mandatory | The total number of ZIP network information packets which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.20 | ScalarsnRtATInDdpPkts | read-only | mandatory | The total number of DDP datagrams received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.21 | ScalarsnRtATOutDdpPkts | read-only | mandatory | The total number of DDP datagrams which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.22 | ScalarsnRtATForwardedDdpPkts | read-only | mandatory | The number of input DDP datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forwar… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.23 | ScalarsnRtATInDeliveredDdpPkts | read-only | mandatory | The total number of input DDP datagrams for which this entity was their final DDP destination. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.24 | ScalarsnRtATDroppedNoRouteDdpPkts | read-only | mandatory | The total number of DDP datagrams dropped because a route could not be found to their final destination. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.25 | ScalarsnRtATDroppedBadHopCountsDdpPkts | read-only | mandatory | The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.26 | ScalarsnRtATDroppedOtherReasonsDdpPkts | read-only | mandatory | The total number of DDP datagrams dropped because of other reasons, e.g. run out of resouces. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.27 | ScalarsnRtATInAarpPkts | read-only | mandatory | The total number of AppleTalk ARP packets received by this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.28 | ScalarsnRtATOutAarpPkts | read-only | mandatory | The total number of AppleTalk ARP packets which were transmitted from this entity. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.2 | TablesnRtATSocketPriorityTable | not-accessible | mandatory | AppleTalk socket priority table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1 | RowsnRtATSocketPriorityEntry | not-accessible | mandatory | An entry in the AppleTalk socket priority table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1.1 | ColumnsnRtATSocketPrioritySocket | read-only | mandatory | Socket number for a socket priority entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1.2 | ColumnsnRtATSocketPriorityPriority | read-write | mandatory | The Standalone router Priority level applies to a socket number: low(0) high(1) The BigIron Priority levels applies to a socket number are: level0(0), level1(1… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3 | TablesnRtATPortZoneFilterTable | not-accessible | mandatory | AppleTalk interface zone filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1 | RowsnRtATPortZoneFilterEntry | not-accessible | mandatory | An entry in the AppleTalk interface zone filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.1 | ColumnsnRtATPortZoneFilterPortIndex | read-only | mandatory | The port index for a zone filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.2 | ColumnsnRtATPortZoneFilterZone | read-only | mandatory | The zone name granted for this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.3 | ColumnsnRtATPortZoneFilterAction | read-write | mandatory | Action to take if the AppleTalk packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.4 | ColumnsnRtATPortZoneFilterRtmpEnable | read-write | mandatory | Enable/disable RTMP filtering. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.5 | ColumnsnRtATPortZoneFilterRowStatus | read-write | mandatory | To create or delete a zone filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4 | TablesnRtATPortTable | not-accessible | mandatory | AppleTalk port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1 | RowsnRtATPortEntry | not-accessible | mandatory | An entry in the AppleTalk port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.1 | ColumnsnRtATPortIndex | read-only | mandatory | The port index for port table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.2 | ColumnsnRtATPortArpAge | read-write | mandatory | The time in minutes an ARP entry can be valid without relearning. 0 - Don't age. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.3 | ColumnsnRtATPortState | read-only | mandatory | The up and down state of this port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.4 | ColumnsnRtATPortSeedRouter | read-only | mandatory | This port was configured to seed or non-seed router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.5 | ColumnsnRtATPortOperationMode | read-only | mandatory | The operation mode of this port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5 | TablesnRtATFwdCacheTable | not-accessible | mandatory | AppleTalk forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1 | RowsnRtATFwdCacheEntry | not-accessible | mandatory | An entry in the AppleTalk forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.1 | ColumnsnRtATFwdCacheIndex | read-only | mandatory | The table index for an AppleTalk forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.2 | ColumnsnRtATFwdCacheNetAddr | read-only | mandatory | The AppleTalk network address of a station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.3 | ColumnsnRtATFwdCacheMacAddr | read-only | mandatory | The Mac address of an AppleTalk station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.4 | ColumnsnRtATFwdCacheNextHop | read-only | mandatory | The next hop router network address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.5 | ColumnsnRtATFwdCacheOutgoingPort | read-only | mandatory | The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.6 | ColumnsnRtATFwdCacheType | read-only | mandatory | The 'dynamic' or 'permanent' type for an AppleTalk forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.7 | ColumnsnRtATFwdCacheAction | read-only | mandatory | The action to take. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.8 | ColumnsnRtATFwdCacheVLanId | read-only | mandatory | The VLAN ID for an AppleTalk forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6 | TablesnRtATZoneTable | not-accessible | mandatory | AppleTalk zone table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1 | RowsnRtATZoneEntry | not-accessible | mandatory | An entry in the AppleTalk zone table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.1 | ColumnsnRtATZoneIndex | read-only | mandatory | The table index for an AppleTalk zone table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.2 | ColumnsnRtATZoneNetStart | read-only | mandatory | The first AppleTalk network address in the range of this zone name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.3 | ColumnsnRtATZoneNetEnd | read-only | mandatory | The last AppleTalk network address in the range of this zone name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.4 | ColumnsnRtATZoneName | read-only | mandatory | The zone name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.7 | TablesnRtATAddZoneFilterTable | not-accessible | mandatory | AppleTalk additional zone filter table. Additional zones are those zones that do not match any zones defined in the zone filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1 | RowsnRtATAddZoneFilterEntry | not-accessible | mandatory | An entry in the AppleTalk additional zone filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.1 | ColumnsnRtATAddZoneFilterPortIndex | read-only | mandatory | The port index for additional zone filter table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.2 | ColumnsnRtATAddZoneFilterAction | read-write | mandatory | Action to take if no zone filter match. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.3 | ColumnsnRtATAddZoneFilterRtmpEnable | read-write | mandatory | Enable/disable RTMP filtering on additional zone. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11 | NodesnBgp4 | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1 | NodesnBgp4Gen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1 | ScalarsnBgp4GenAlwaysCompareMed | read-write | mandatory | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2 | ScalarsnBgp4GenAutoSummary | read-write | mandatory | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3 | ScalarsnBgp4GenDefaultLocalPreference | read-write | mandatory | To set the default local preference attribute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4 | ScalarsnBgp4GenDefaultInfoOriginate | read-write | mandatory | To enable/disable the default Information Originate. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5 | ScalarsnBgp4GenFastExternalFallover | read-write | mandatory | To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6 | ScalarsnBgp4GenNextBootNeighbors | read-write | mandatory | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBg… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7 | ScalarsnBgp4GenNextBootRoutes | read-write | mandatory | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8 | ScalarsnBgp4GenSynchronization | read-write | mandatory | To enable/disable the synchronization between BGP and your IGP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9 | ScalarsnBgp4GenKeepAliveTime | read-write | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10 | ScalarsnBgp4GenHoldTime | read-write | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11 | ScalarsnBgp4GenRouterId | read-write | mandatory | BGP Router Id. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12 | ScalarsnBgp4GenTableMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13 | ScalarsnBgp4GenAdminStat | read-write | mandatory | The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14 | ScalarsnBgp4GenDefaultMetric | read-write | mandatory | To set default metric values for the BGP4 protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15 | ScalarsnBgp4GenMaxNeighbors | read-only | mandatory | The maximum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16 | ScalarsnBgp4GenMinNeighbors | read-only | mandatory | The minimum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17 | ScalarsnBgp4GenMaxRoutes | read-only | mandatory | The maximum configured number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18 | ScalarsnBgp4GenMinRoutes | read-only | mandatory | The minimum configured number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19 | ScalarsnBgp4GenMaxAddrFilters | read-only | mandatory | The maximum configured number of BGP4 address filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20 | ScalarsnBgp4GenMaxAggregateAddresses | read-only | mandatory | The maximum configured number of BGP4 aggregate addresses. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21 | ScalarsnBgp4GenMaxAsPathFilters | read-only | mandatory | The maximum configured number of BGP4 AS-PATH filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22 | ScalarsnBgp4GenMaxCommunityFilters | read-only | mandatory | The maximum configured number of BGP4 Community filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23 | ScalarsnBgp4GenMaxNetworks | read-only | mandatory | The maximum configured number of BGP4 Networks. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24 | ScalarsnBgp4GenMaxRouteMapFilters | read-only | mandatory | The maximum configured number of BGP4 Route-map Filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25 | ScalarsnBgp4GenNeighPrefixMinValue | read-only | mandatory | The minimum configured value of BGP4 Neighbor Prefix. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26 | ScalarsnBgp4GenOperNeighbors | read-only | mandatory | The current operational max number of neighbors configured for a BGP Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27 | ScalarsnBgp4GenOperRoutes | read-only | mandatory | The current operational number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28 | ScalarsnBgp4GenLocalAs | read-write | mandatory | Bgp4 local autonomous system number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29 | ScalarsnBgp4GenRoutesInstalled | read-only | mandatory | Bgp4 installed routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30 | ScalarsnBgp4GenAsPathInstalled | read-only | mandatory | Bgp4 installed autonomous system path. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31 | ScalarsnBgp4ExternalDistance | read-write | mandatory | Administrative distance for BGP external routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32 | ScalarsnBgp4InternalDistance | read-write | mandatory | Administrative distance for BGP internal routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33 | ScalarsnBgp4LocalDistance | read-write | mandatory | Administrative distance for BGP local routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34 | ScalarsnBgp4OperNumOfAttributes | read-only | mandatory | The operational number of attribute entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35 | ScalarsnBgp4NextBootMaxAttributes | read-write | mandatory | The next boot maximum attribute entries. 10000 means reset to default. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36 | ScalarsnBgp4ClusterId | read-write | mandatory | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37 | ScalarsnBgp4ClientToClientReflection | read-write | mandatory | To enable/disable the client to client reflection in BGP4. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38 | ScalarsnBgp4GenTotalNeighbors | read-only | mandatory | The current total number of neighbors running in a BGP Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39 | ScalarsnBgp4GenMaxPaths | read-write | mandatory | The maximum configured number of Paths. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40 | ScalarsnBgp4GenConfedId | read-write | mandatory | Bgp4 Confederation Id. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41 | ScalarsnBgp4GenConfedPeers | read-write | mandatory | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.42 | ScalarsnBgp4GenDampening | read-write | mandatory | The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.43 | ScalarsnBgp4GenDampenHalfLife | read-write | mandatory | Bgp4 Dampening Half Life. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.44 | ScalarsnBgp4GenDampenReuse | read-write | mandatory | Bgp4 Dampening Reuse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.45 | ScalarsnBgp4GenDampenSuppress | read-write | mandatory | Bgp4 Dampening Suppress. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.46 | ScalarsnBgp4GenDampenMaxSuppress | read-write | mandatory | Bgp4 Dampening Max Suppress Time. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.47 | ScalarsnBgp4GenDampenMap | read-write | mandatory | An octet string of the route-map name for dampening, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2 | NodesnBgp4AddrFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1 | TablesnBgp4AddrFilterTable | not-accessible | mandatory | Bgp4 Address Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1 | RowsnBgp4AddrFilterEntry | not-accessible | mandatory | An entry in the Bgp4 Address Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1 | ColumnsnBgp4AddrFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2 | ColumnsnBgp4AddrFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3 | ColumnsnBgp4AddrFilterSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4 | ColumnsnBgp4AddrFilterSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5 | ColumnsnBgp4AddrFilterDestIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6 | ColumnsnBgp4AddrFilterDestMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 | ColumnsnBgp4AddrFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3 | NodesnBgp4AggregateAddr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1 | TablesnBgp4AggregateAddrTable | not-accessible | mandatory | Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1 | RowsnBgp4AggregateAddrEntry | not-accessible | mandatory | An entry in the Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1 | ColumnsnBgp4AggregateAddrIp | read-only | mandatory | Aggregate Address IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2 | ColumnsnBgp4AggregateAddrMask | read-only | mandatory | Aggregate Address IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3 | ColumnsnBgp4AggregateAddrOption | read-only | mandatory | address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4 | ColumnsnBgp4AggregateAddrMap | read-write | mandatory | This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only tw… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5 | ColumnsnBgp4AggregateAddrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4 | NodesnBgp4AsPathFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1 | TablesnBgp4AsPathFilterTable | not-accessible | mandatory | Bgp4 AS-Path Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1 | RowsnBgp4AsPathFilterEntry | not-accessible | mandatory | An entry in the Bgp4 As-path Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1 | ColumnsnBgp4AsPathFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2 | ColumnsnBgp4AsPathFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3 | ColumnsnBgp4AsPathFilterRegExpression | read-write | mandatory | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4 | ColumnsnBgp4AsPathFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5 | NodesnBgp4CommunityFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1 | TablesnBgp4CommunityFilterTable | not-accessible | mandatory | Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1 | RowsnBgp4CommunityFilterEntry | not-accessible | mandatory | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1 | ColumnsnBgp4CommunityFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2 | ColumnsnBgp4CommunityFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3 | ColumnsnBgp4CommunityFilterCommNum | read-write | mandatory | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4 | ColumnsnBgp4CommunityFilterInternet | read-write | mandatory | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5 | ColumnsnBgp4CommunityFilterNoAdvertise | read-write | mandatory | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6 | ColumnsnBgp4CommunityFilterNoExport | read-write | mandatory | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7 | ColumnsnBgp4CommunityFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8 | ColumnsnBgp4CommunityFilterLocalAs | read-write | mandatory | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6 | NodesnBgp4NeighGenCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1 | TablesnBgp4NeighGenCfgTable | not-accessible | mandatory | Bgp4 Neighbor General Configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1 | RowsnBgp4NeighGenCfgEntry | not-accessible | mandatory | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1 | ColumnsnBgp4NeighGenCfgNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2 | ColumnsnBgp4NeighGenCfgAdvertlevel | read-write | mandatory | To set the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3 | ColumnsnBgp4NeighGenCfgDefOriginate | read-write | mandatory | To enable/disable the default originate for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4 | ColumnsnBgp4NeighGenCfgEbgpMultihop | read-write | mandatory | To enable/disable the EBGP Muitihop for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5 | ColumnsnBgp4NeighGenCfgMaxPrefix | read-write | mandatory | To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6 | ColumnsnBgp4NeighGenCfgNextHopSelf | read-write | mandatory | To enable/disable the next-hop processing of BGP updates on the router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7 | ColumnsnBgp4NeighGenCfgRemoteAs | read-write | mandatory | To specify a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8 | ColumnsnBgp4NeighGenCfgSendComm | read-write | mandatory | To specify that a COMMUNITES attribute should be sent to a BGP neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9 | ColumnsnBgp4NeighGenCfgWeight | read-write | mandatory | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10 | ColumnsnBgp4NeighGenCfgWeightFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11 | ColumnsnBgp4NeighGenCfgRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12 | ColumnsnBgp4NeighGenCfgUpdateSrcLpbIntf | read-write | mandatory | To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13 | ColumnsnBgp4NeighGenCfgRouteRefClient | read-write | mandatory | To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14 | ColumnsnBgp4NeighGenCfgRemovePrivateAs | read-write | mandatory | To enable/disable filtering private AS number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15 | ColumnsnBgp4NeighGenCfgEbgpMultihopTtl | read-write | mandatory | The EBGP Muitihop TTL for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16 | ColumnsnBgp4NeighGenCfgShutdown | read-write | mandatory | To enable/disable BGP4 Nbr Shutdown. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17 | ColumnsnBgp4NeighGenCfgKeepAliveTime | read-write | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18 | ColumnsnBgp4NeighGenCfgHoldTime | read-write | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.19 | ColumnsnBgp4NeighGenCfgDefOrigMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.20 | ColumnsnBgp4NeighGenCfgDesc | read-write | mandatory | An octet string of the neighbor description. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.21 | ColumnsnBgp4NeighGenCfgPass | read-write | mandatory | An octet string of the neighbor Md5 password. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7 | NodesnBgp4NeighDistGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1 | TablesnBgp4NeighDistGroupTable | not-accessible | mandatory | Bgp4 Neighbor Distribute Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1 | RowsnBgp4NeighDistGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Distribute Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1 | ColumnsnBgp4NeighDistGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2 | ColumnsnBgp4NeighDistGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3 | ColumnsnBgp4NeighDistGroupAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4 | ColumnsnBgp4NeighDistGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.5 | ColumnsnBgp4NeighDistGroupInFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.6 | ColumnsnBgp4NeighDistGroupOutFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.7 | ColumnsnBgp4NeighDistGroupInIpAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.8 | ColumnsnBgp4NeighDistGroupOutIpAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.9 | ColumnsnBgp4NeighDistGroupInPrefixList | read-write | mandatory | A Prefix name list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.10 | ColumnsnBgp4NeighDistGroupOutPrefixList | read-write | mandatory | A Prefix name list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8 | NodesnBgp4NeighFilterGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1 | TablesnBgp4NeighFilterGroupTable | not-accessible | mandatory | Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1 | RowsnBgp4NeighFilterGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1 | ColumnsnBgp4NeighFilterGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2 | ColumnsnBgp4NeighFilterGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3 | ColumnsnBgp4NeighFilterGroupAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4 | ColumnsnBgp4NeighFilterGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.5 | ColumnsnBgp4NeighFilterGroupInFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.6 | ColumnsnBgp4NeighFilterGroupOutFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.7 | ColumnsnBgp4NeighFilterGroupInAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.8 | ColumnsnBgp4NeighFilterGroupOutAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.9 | ColumnsnBgp4NeighFilterGroupWeight | read-write | mandatory | To assign a weight to a neighbor filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.10 | ColumnsnBgp4NeighFilterGroupWeightAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9 | NodesnBgp4NeighRouteMap | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1 | TablesnBgp4NeighRouteMapTable | not-accessible | mandatory | Bgp4 Neighbor Route Map table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1 | RowsnBgp4NeighRouteMapEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1 | ColumnsnBgp4NeighRouteMapNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2 | ColumnsnBgp4NeighRouteMapDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3 | ColumnsnBgp4NeighRouteMapMapName | read-write | mandatory | An octet string of the route-map name, Each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4 | ColumnsnBgp4NeighRouteMapRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10 | NodesnBgp4Network | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1 | TablesnBgp4NetworkTable | not-accessible | mandatory | Bgp4 Network Weight table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1 | RowsnBgp4NetworkEntry | not-accessible | mandatory | An entry in the Bgp4 Network Weight table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1 | ColumnsnBgp4NetworkIp | read-only | mandatory | The IP Address for a network entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2 | ColumnsnBgp4NetworkSubnetMask | read-only | mandatory | The subnet mask for a network entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3 | ColumnsnBgp4NetworkWeight | read-write | mandatory | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4 | ColumnsnBgp4NetworkBackdoor | read-write | mandatory | To enable/disable the backdoor for this network. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5 | ColumnsnBgp4NetworkRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11 | NodesnBgp4Redis | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1 | TablesnBgp4RedisTable | not-accessible | mandatory | The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1 | RowsnBgp4RedisEntry | not-accessible | mandatory | The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1 | ColumnsnBgp4RedisProtocol | read-only | mandatory | The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the conne… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2 | ColumnsnBgp4RedisMetric | read-write | mandatory | The metric of using the specified protocol Metric value. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3 | ColumnsnBgp4RedisRouteMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4 | ColumnsnBgp4RedisWeight | read-write | mandatory | To assign a weight for the specified protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5 | ColumnsnBgp4RedisMatchInternal | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6 | ColumnsnBgp4RedisMatchExternal1 | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7 | ColumnsnBgp4RedisMatchExternal2 | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8 | ColumnsnBgp4RedisRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12 | NodesnBgp4RouteMapFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1 | TablesnBgp4RouteMapFilterTable | not-accessible | mandatory | Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1 | RowsnBgp4RouteMapFilterEntry | not-accessible | mandatory | An entry in the Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1 | ColumnsnBgp4RouteMapFilterMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2 | ColumnsnBgp4RouteMapFilterSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3 | ColumnsnBgp4RouteMapFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4 | ColumnsnBgp4RouteMapFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13 | NodesnBgp4RouteMapMatch | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1 | TablesnBgp4RouteMapMatchTable | not-accessible | mandatory | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1 | RowsnBgp4RouteMapMatchEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map Match table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1 | ColumnsnBgp4RouteMapMatchMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2 | ColumnsnBgp4RouteMapMatchSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3 | ColumnsnBgp4RouteMapMatchAsPathFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4 | ColumnsnBgp4RouteMapMatchCommunityFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5 | ColumnsnBgp4RouteMapMatchAddressFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6 | ColumnsnBgp4RouteMapMatchMetric | read-write | mandatory | To match a metric for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7 | ColumnsnBgp4RouteMapMatchNextHopList | read-write | mandatory | A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8 | ColumnsnBgp4RouteMapMatchRouteType | read-write | mandatory | To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9 | ColumnsnBgp4RouteMapMatchTagList | read-write | mandatory | To match a BGP tag access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10 | ColumnsnBgp4RouteMapMatchRowMask | read-write | mandatory | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchE… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.11 | ColumnsnBgp4RouteMapMatchAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.12 | ColumnsnBgp4RouteMapMatchCommunityList | read-write | mandatory | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.13 | ColumnsnBgp4RouteMapMatchAddressAccessList | read-write | mandatory | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.14 | ColumnsnBgp4RouteMapMatchAddressPrefixList | read-write | mandatory | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.15 | ColumnsnBgp4RouteMapMatchNextHopAccessList | read-write | mandatory | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.16 | ColumnsnBgp4RouteMapMatchNextHopPrefixList | read-write | mandatory | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14 | NodesnBgp4RouteMapSet | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1 | TablesnBgp4RouteMapSetTable | not-accessible | mandatory | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1 | RowsnBgp4RouteMapSetEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1 | ColumnsnBgp4RouteMapSetMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2 | ColumnsnBgp4RouteMapSetSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3 | ColumnsnBgp4RouteMapSetAsPathType | read-write | mandatory | To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4 | ColumnsnBgp4RouteMapSetAsPathString | read-write | mandatory | as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5 | ColumnsnBgp4RouteMapSetAutoTag | read-write | mandatory | To enable/disable the automatic-tag for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6 | ColumnsnBgp4RouteMapSetCommunityType | read-write | mandatory | To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7 | ColumnsnBgp4RouteMapSetCommunityNum | read-write | deprecated | community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8 | ColumnsnBgp4RouteMapSetCommunityAdditive | read-write | mandatory | To add the community to the already existing communities. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9 | ColumnsnBgp4RouteMapSetLocalPreference | read-write | mandatory | To modify a local-preference for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10 | ColumnsnBgp4RouteMapSetMetric | read-write | mandatory | To modify a metric for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11 | ColumnsnBgp4RouteMapSetNextHop | read-write | mandatory | To modify the IP address of the next hop for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12 | ColumnsnBgp4RouteMapSetOrigin | read-write | mandatory | To set the BGP origin code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13 | ColumnsnBgp4RouteMapSetTag | read-write | mandatory | To specify the tag for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14 | ColumnsnBgp4RouteMapSetWeight | read-write | mandatory | To specify the BGP weight for the routing table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15 | ColumnsnBgp4RouteMapSetRowMask | read-write | mandatory | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEnt… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16 | ColumnsnBgp4RouteMapSetCommunityNums | read-write | mandatory | Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.17 | ColumnsnBgp4RouteMapSetDampenHalfLife | read-write | mandatory | Bgp4 Route Map Dampening Half Life. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.18 | ColumnsnBgp4RouteMapSetDampenReuse | read-write | mandatory | Bgp4 Route Map Dampening Reuse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.19 | ColumnsnBgp4RouteMapSetDampenSuppress | read-write | mandatory | Bgp4 Route Map Dampening Suppress. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.20 | ColumnsnBgp4RouteMapSetDampenMaxSuppress | read-write | mandatory | Bgp4 Route Map Dampening Max Suppress Time. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15 | NodesnBgp4NeighOperStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1 | TablesnBgp4NeighOperStatusTable | not-accessible | mandatory | Bgp4 Neighbor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1 | RowsnBgp4NeighOperStatusEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1 | ColumnsnBgp4NeighOperStatusIndex | read-only | mandatory | The index for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2 | ColumnsnBgp4NeighOperStatusIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3 | ColumnsnBgp4NeighOperStatusRemoteAs | read-only | mandatory | To show a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4 | ColumnsnBgp4NeighOperStatusBgpType | read-only | mandatory | To show the type of BGP protocol whether is internal or external. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5 | ColumnsnBgp4NeighOperStatusState | read-only | mandatory | To show the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6 | ColumnsnBgp4NeighOperStatusKeepAliveTime | read-only | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7 | ColumnsnBgp4NeighOperStatusHoldTime | read-only | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8 | ColumnsnBgp4NeighOperStatusAdvertlevel | read-only | mandatory | To show the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9 | ColumnsnBgp4NeighOperStatusKeepAliveTxCounts | read-only | mandatory | Keep alive message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10 | ColumnsnBgp4NeighOperStatusKeepAliveRxCounts | read-only | mandatory | Keep alive message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11 | ColumnsnBgp4NeighOperStatusUpdateTxCounts | read-only | mandatory | Update message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12 | ColumnsnBgp4NeighOperStatusUpdateRxCounts | read-only | mandatory | Update message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13 | ColumnsnBgp4NeighOperStatusNotifTxCounts | read-only | mandatory | Notification message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14 | ColumnsnBgp4NeighOperStatusNotifRxCounts | read-only | mandatory | Notification message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15 | ColumnsnBgp4NeighOperStatusOpenTxCounts | read-only | mandatory | Open message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16 | ColumnsnBgp4NeighOperStatusOpenRxCounts | read-only | mandatory | Open message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16 | NodesnBgp4RouteOperStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1 | TablesnBgp4RouteOperStatusTable | not-accessible | mandatory | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1 | RowsnBgp4RouteOperStatusEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1 | ColumnsnBgp4RouteOperStatusIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2 | ColumnsnBgp4RouteOperStatusIp | read-only | mandatory | The IP Address for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3 | ColumnsnBgp4RouteOperStatusSubnetMask | read-only | mandatory | The IP Subnet Mask for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4 | ColumnsnBgp4RouteOperStatusNextHop | read-only | mandatory | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5 | ColumnsnBgp4RouteOperStatusMetric | read-only | mandatory | To show the metric value of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6 | ColumnsnBgp4RouteOperStatusLocalPreference | read-only | mandatory | To show the local preference of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7 | ColumnsnBgp4RouteOperStatusWeight | read-only | mandatory | To show the weight of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8 | ColumnsnBgp4RouteOperStatusOrigin | read-only | mandatory | To show the origin of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9 | ColumnsnBgp4RouteOperStatusStatus | read-only | mandatory | A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10 | ColumnsnBgp4RouteOperStatusRouteTag | read-only | mandatory | To show the route tag of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11 | ColumnsnBgp4RouteOperStatusCommunityList | read-only | mandatory | To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12 | ColumnsnBgp4RouteOperStatusAsPathList | read-only | mandatory | To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17 | NodesnBgp4NeighborSummary | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1 | TablesnBgp4NeighborSummaryTable | not-accessible | mandatory | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1 | RowsnBgp4NeighborSummaryEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1 | ColumnsnBgp4NeighborSummaryIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2 | ColumnsnBgp4NeighborSummaryIp | read-only | mandatory | The IP Address for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3 | ColumnsnBgp4NeighborSummaryState | read-only | mandatory | To show the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4 | ColumnsnBgp4NeighborSummaryStateChgTime | read-only | mandatory | The time of a change of the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5 | ColumnsnBgp4NeighborSummaryRouteReceived | read-only | mandatory | The number of routes received of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6 | ColumnsnBgp4NeighborSummaryRouteInstalled | read-only | mandatory | The number of routes installed of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18 | NodesnBgp4Attribute | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1 | TablesnBgp4AttributeTable | not-accessible | mandatory | Bgp4 Attribute entries table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1 | RowsnBgp4AttributeEntry | not-accessible | mandatory | An entry in the Bgp4 Attribute table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1 | ColumnsnBgp4AttributeIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2 | ColumnsnBgp4AttributeNextHop | read-only | mandatory | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3 | ColumnsnBgp4AttributeMetric | read-only | mandatory | To show the metric value of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4 | ColumnsnBgp4AttributeOrigin | read-only | mandatory | To show the origin of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5 | ColumnsnBgp4AttributeAggregatorAs | read-only | mandatory | The aggregator AS number for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6 | ColumnsnBgp4AttributeRouterId | read-only | mandatory | The router ID for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7 | ColumnsnBgp4AttributeAtomicAggregatePresent | read-only | mandatory | The atomic aggregate present in an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8 | ColumnsnBgp4AttributeLocalPreference | read-only | mandatory | To show the local preference of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9 | ColumnsnBgp4AttributeCommunityList | read-only | mandatory | To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10 | ColumnsnBgp4AttributeAsPathList | read-only | mandatory | To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11 | ColumnsnBgp4AttributeOriginator | read-only | mandatory | The originator IP address for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12 | ColumnsnBgp4AttributeClusterList | read-only | mandatory | To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID w… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19 | NodesnBgp4ClearNeighborCmd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1 | TablesnBgp4ClearNeighborCmdTable | not-accessible | mandatory | Clear Bgp4 command table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1 | RowsnBgp4ClearNeighborCmdEntry | not-accessible | mandatory | An entry in the clear Bgp4 neighbor command table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1 | ColumnsnBgp4ClearNeighborCmdIp | read-only | mandatory | The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2 | ColumnsnBgp4ClearNeighborCmdElement | read-write | mandatory | To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20 | NodesnBgp4NeighPrefixGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1 | TablesnBgp4NeighPrefixGroupTable | not-accessible | mandatory | Bgp4 Neighbor Prefix Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1 | RowsnBgp4NeighPrefixGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Prefix Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.1 | ColumnsnBgp4NeighPrefixGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.2 | ColumnsnBgp4NeighPrefixGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.3 | ColumnsnBgp4NeighPrefixGroupInAccessList | read-write | mandatory | An in access prefix list name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.4 | ColumnsnBgp4NeighPrefixGroupOutAccessList | read-write | mandatory | An out prefix list name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.5 | ColumnsnBgp4NeighPrefixGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12 | NodesnVrrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1 | NodesnVrrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1 | ScalarsnVrrpGroupOperMode | read-write | mandatory | The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2 | ScalarsnVrrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3 | ScalarsnVrrpIfMaxNumVridPerIntf | read-only | mandatory | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4 | ScalarsnVrrpIfMaxNumVridPerSystem | read-only | mandatory | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5 | ScalarsnVrrpClearVrrpStat | read-write | mandatory | Clear VRRP statistics command. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.6 | ScalarsnVrrpGroupOperModeVrrpextended | read-write | mandatory | The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2 | NodesnVrrpIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1 | TablesnVrrpIfTable | not-accessible | deprecated | The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1 | RowsnVrrpIfEntry | not-accessible | deprecated | The VRRP Interface Entry describes one interface from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1 | ColumnsnVrrpIfPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2 | ColumnsnVrrpIfAuthType | read-write | deprecated | The authentication type of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3 | ColumnsnVrrpIfAuthPassword | read-write | deprecated | The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4 | ColumnsnVrrpIfRxHeaderErrCnts | read-only | deprecated | The received Header error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5 | ColumnsnVrrpIfRxAuthTypeErrCnts | read-only | deprecated | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6 | ColumnsnVrrpIfRxAuthPwdMismatchErrCnts | read-only | deprecated | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7 | ColumnsnVrrpIfRxVridErrCnts | read-only | deprecated | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | NodesnVrrpVirRtr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | TablesnVrrpVirRtrTable | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | RowsnVrrpVirRtrEntry | not-accessible | deprecated | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 | ColumnsnVrrpVirRtrPort | read-only | deprecated | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 | ColumnsnVrrpVirRtrId | read-only | deprecated | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 | ColumnsnVrrpVirRtrOwnership | read-write | deprecated | The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 | ColumnsnVrrpVirRtrCfgPriority | read-write | deprecated | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 | ColumnsnVrrpVirRtrTrackPriority | read-write | deprecated | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 | ColumnsnVrrpVirRtrCurrPriority | read-only | deprecated | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 | ColumnsnVrrpVirRtrHelloInt | read-write | deprecated | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 | ColumnsnVrrpVirRtrDeadInt | read-write | deprecated | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 | ColumnsnVrrpVirRtrPreemptMode | read-write | deprecated | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 | ColumnsnVrrpVirRtrState | read-only | deprecated | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 | ColumnsnVrrpVirRtrActivate | read-write | deprecated | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 | ColumnsnVrrpVirRtrIpAddrMask | read-write | deprecated | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 | ColumnsnVrrpVirRtrTrackPortMask | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this objec… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 | ColumnsnVrrpVirRtrTrackVifMask | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 | ColumnsnVrrpVirRtrRowStatus | read-write | deprecated | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 | ColumnsnVrrpVirRtrRxArpPktDropCnts | read-only | deprecated | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 | ColumnsnVrrpVirRtrRxIpPktDropCnts | read-only | deprecated | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 | ColumnsnVrrpVirRtrRxPortMismatchCnts | read-only | deprecated | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 | ColumnsnVrrpVirRtrRxNumOfIpMismatchCnts | read-only | deprecated | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 | ColumnsnVrrpVirRtrRxIpMismatchCnts | read-only | deprecated | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 | ColumnsnVrrpVirRtrRxHelloIntMismatchCnts | read-only | deprecated | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 | ColumnsnVrrpVirRtrRxPriorityZeroFromMasterCnts | read-only | deprecated | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 | ColumnsnVrrpVirRtrRxHigherPriorityCnts | read-only | deprecated | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 | ColumnsnVrrpVirRtrTransToMasterStateCnts | read-only | deprecated | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 | ColumnsnVrrpVirRtrTransToBackupStateCnts | read-only | deprecated | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 | ColumnsnVrrpVirRtrCurrDeadInt | read-only | deprecated | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 | ColumnsnVrrpVirRtrTrackPortList | read-write | deprecated | This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 | ColumnsnVrrpVirRtrTrackVifPortList | read-write | deprecated | This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default va… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4 | NodesnVrrpIntf2 | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1 | TablesnVrrpIf2Table | not-accessible | mandatory | The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1 | RowsnVrrpIf2Entry | not-accessible | mandatory | The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.1 | ColumnsnVrrpIf2AuthType | read-write | mandatory | The authentication type of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.2 | ColumnsnVrrpIf2AuthPassword | read-write | mandatory | The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.3 | ColumnsnVrrpIf2RxHeaderErrCnts | read-only | mandatory | The received Header error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.4 | ColumnsnVrrpIf2RxAuthTypeErrCnts | read-only | mandatory | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.5 | ColumnsnVrrpIf2RxAuthPwdMismatchErrCnts | read-only | mandatory | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.6 | ColumnsnVrrpIf2RxVridErrCnts | read-only | mandatory | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5 | NodesnVrrpVirRtr2 | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1 | TablesnVrrpVirRtr2Table | not-accessible | mandatory | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1 | RowsnVrrpVirRtr2Entry | not-accessible | mandatory | The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1 | ColumnsnVrrpVirRtr2Id | read-only | mandatory | One of the virtual router ID of this Vrrp and Vrrpe interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2 | ColumnsnVrrpVirRtr2Ownership | read-write | mandatory | The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3 | ColumnsnVrrpVirRtr2CfgPriority | read-write | mandatory | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4 | ColumnsnVrrpVirRtr2TrackPriority | read-write | mandatory | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5 | ColumnsnVrrpVirRtr2CurrPriority | read-only | mandatory | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6 | ColumnsnVrrpVirRtr2HelloInt | read-write | mandatory | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7 | ColumnsnVrrpVirRtr2DeadInt | read-write | mandatory | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8 | ColumnsnVrrpVirRtr2PreemptMode | read-write | mandatory | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9 | ColumnsnVrrpVirRtr2State | read-only | mandatory | This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10 | ColumnsnVrrpVirRtr2IpAddrMask | read-write | mandatory | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11 | ColumnsnVrrpVirRtr2Activate | read-write | mandatory | This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe R… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12 | ColumnsnVrrpVirRtr2BackupInt | read-write | mandatory | Time interval between backup routers hello message advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13 | ColumnsnVrrpVirRtr2RowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14 | ColumnsnVrrpVirRtr2RxArpPktDropCnts | read-only | mandatory | The received Vrrp and Vrrpe ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15 | ColumnsnVrrpVirRtr2RxIpPktDropCnts | read-only | mandatory | The received Vrrp and Vrrpe IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16 | ColumnsnVrrpVirRtr2RxPortMismatchCnts | read-only | mandatory | The received Vrrp and Vrrpe Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17 | ColumnsnVrrpVirRtr2RxNumOfIpMismatchCnts | read-only | mandatory | The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18 | ColumnsnVrrpVirRtr2RxIpMismatchCnts | read-only | mandatory | The received Vrrp and Vrrpe IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19 | ColumnsnVrrpVirRtr2RxHelloIntMismatchCnts | read-only | mandatory | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20 | ColumnsnVrrpVirRtr2RxPriorityZeroFromMasterCnts | read-only | mandatory | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21 | ColumnsnVrrpVirRtr2RxHigherPriorityCnts | read-only | mandatory | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22 | ColumnsnVrrpVirRtr2TransToMasterStateCnts | read-only | mandatory | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23 | ColumnsnVrrpVirRtr2TransToBackupStateCnts | read-only | mandatory | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24 | ColumnsnVrrpVirRtr2CurrDeadInt | read-only | mandatory | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25 | ColumnsnVrrpVirRtr2TrackPortList | read-write | mandatory | This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecuti… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26 | ColumnsnVrrpVirRtr2AdvertiseBackup | read-write | mandatory | Set Advertise this backup router to master |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27 | ColumnsnVrrpVirRtr2MasterIpAddr | read-only | mandatory | The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtua… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28 | ColumnsnVrrpVirRtr2IpAddrCount | read-only | mandatory | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29 | ColumnsnVrrpVirRtr2VirtualMacAddr | read-only | mandatory | The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13 | NodesnLoopbackIf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1 | TablesnLoopbackIntfConfigTable | not-accessible | mandatory | Loopback Interface Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1 | RowsnLoopbackIntfConfigEntry | not-accessible | mandatory | An entry in the Loopback Interface Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1 | ColumnsnLoopbackIntfConfigPortIndex | read-only | mandatory | The port index for Loopback Interface config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2 | ColumnsnLoopbackIntfMode | read-write | mandatory | The Loopback Interface mode. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3 | ColumnsnLoopbackIntfRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14 | NodesnPOS | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1 | NodesnPOSInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1 | TablesnPOSInfoTable | not-accessible | mandatory | A specific snPOSInfo group consists of a number of switch ports. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1 | RowsnPOSInfoEntry | not-accessible | mandatory | An entry in the snPOSInfo table indicates the configuration on a specified port. A SNMP SET PDU for a row of the snPOSInfoTable requires the entired sequence o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.1 | ColumnsnPOSInfoPortNum | read-only | mandatory | The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.2 | ColumnsnPOSIfIndex | read-only | mandatory | In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.3 | ColumnsnPOSDescr | read-only | mandatory | A textual string containing the slot/port information about the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.4 | ColumnsnPOSName | read-write | mandatory | Port Name string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.5 | ColumnsnPOSInfoSpeed | read-write | mandatory | The speed configuration for a port. The values are: 155000 622000 2488000 |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.6 | ColumnsnPOSInfoAdminStatus | read-write | mandatory | The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.7 | ColumnsnPOSInfoLinkStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.8 | ColumnsnPOSInfoClock | read-write | mandatory | Clock default internal |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.9 | ColumnsnPOSInfoLoopBack | read-write | mandatory | Loop back default none |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.10 | ColumnsnPOSInfoScrambleATM | read-write | mandatory | ATM style scrambling default off |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.11 | ColumnsnPOSInfoFraming | read-write | mandatory | Framing default SONET |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.12 | ColumnsnPOSInfoCRC | read-write | mandatory | CRC default 32 bit |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.13 | ColumnsnPOSInfoKeepAlive | read-write | mandatory | Keep-alive default 10 |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.14 | ColumnsnPOSInfoFlagC2 | read-write | mandatory | C2 flag |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.15 | ColumnsnPOSInfoFlagJ0 | read-write | mandatory | J0 flag |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.16 | ColumnsnPOSInfoFlagH1 | read-write | mandatory | H1 flag |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.17 | ColumnsnPOSStatsInFrames | read-only | mandatory | The total number of packets received on the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.18 | ColumnsnPOSStatsOutFrames | read-only | mandatory | The total number of packets transmitted out of the interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.19 | ColumnsnPOSStatsAlignErrors | read-only | mandatory | dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS che… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.20 | ColumnsnPOSStatsFCSErrors | read-only | mandatory | dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The co… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.21 | ColumnsnPOSStatsFrameTooLongs | read-only | mandatory | dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instanc… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.22 | ColumnsnPOSStatsFrameTooShorts | read-only | mandatory | A count of frames received on a particular interface that below the minimum permitted frame size. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.23 | ColumnsnPOSStatsInDiscard | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24 | ColumnsnPOSStatsOutDiscard | read-only | mandatory | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.25 | ColumnsnPOSInOctets | read-only | mandatory | The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 12… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.26 | ColumnsnPOSOutOctets | read-only | mandatory | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.27 | ColumnsnPOSStatsInBitsPerSec | read-only | mandatory | The number of bits per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.28 | ColumnsnPOSStatsOutBitsPerSec | read-only | mandatory | The number of bits per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.29 | ColumnsnPOSStatsInPktsPerSec | read-only | mandatory | The number of packets per second received on the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.30 | ColumnsnPOSStatsOutPktsPerSec | read-only | mandatory | The number of packets per second transmitted out of the interface over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.31 | ColumnsnPOSStatsInUtilization | read-only | mandatory | The input network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.32 | ColumnsnPOSStatsOutUtilization | read-only | mandatory | The output network utilization in hundredths of a percent over a 5 minutes interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.33 | ColumnsnPOSTagType | read-only | mandatory | For tagged port, we could have multiple VLANs per port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.34 | ColumnsnPOSStatsB1 | read-only | mandatory | Section error monitoring. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.35 | ColumnsnPOSStatsB2 | read-only | mandatory | Line error monitoring. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.36 | ColumnsnPOSStatsB3 | read-only | mandatory | Path error monitoring. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.37 | ColumnsnPOSStatsAIS | read-only | mandatory | Alarm indication signal. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.38 | ColumnsnPOSStatsRDI | read-only | mandatory | Remote defect indication. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.39 | ColumnsnPOSStatsLOP | read-only | mandatory | Loss of pointer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.40 | ColumnsnPOSStatsLOF | read-only | mandatory | Loss of frame. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.41 | ColumnsnPOSStatsLOS | read-only | mandatory | Loss of signal. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15 | NodesnMpls | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15 | NodemplsMIB | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.1 | IdentitymplsTCMIB | This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information bases (MIBs) for managing MPLS networks. | ||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2 | IdentitymplsLsrMIB | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Mult… | ||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1 | NodemplsLsrObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1 | TablemplsInterfaceConfTable | not-accessible | current | This table specifies per-interface MPLS capability and associated information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1 | RowmplsInterfaceConfEntry | not-accessible | current | An entry in this table is created by an LSR for every interface capable of supporting MPLS. Each entry in this table will exist only if a corresponding entry i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1 | ColumnmplsInterfaceConfIndex | not-accessible | current | This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2 | ColumnmplsInterfaceLabelMinIn | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3 | ColumnmplsInterfaceLabelMaxIn | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4 | ColumnmplsInterfaceLabelMinOut | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5 | ColumnmplsInterfaceLabelMaxOut | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6 | ColumnmplsInterfaceTotalBandwidth | read-only | current | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable whe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7 | ColumnmplsInterfaceAvailableBandwidth | read-only | current | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculat… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8 | ColumnmplsInterfaceLabelParticipationType | read-only | current | Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2 | TablemplsInterfacePerfTable | not-accessible | current | This table provides MPLS performance information on a per-interface basis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1 | RowmplsInterfacePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1 | ColumnmplsInterfaceInLabelsUsed | read-only | current | This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2 | ColumnmplsInterfaceFailedLabelLookup | read-only | current | This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross- connect entr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3 | ColumnmplsInterfaceOutLabelsUsed | read-only | current | This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4 | ColumnmplsInterfaceOutFragments | read-only | current | This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-inter… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3 | TablemplsInSegmentTable | not-accessible | current | This table contains a collection of incoming segments to an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1 | RowmplsInSegmentEntry | not-accessible | current | An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1 | ColumnmplsInSegmentIfIndex | not-accessible | current | This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero repre… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2 | ColumnmplsInSegmentLabel | not-accessible | current | The incoming label for this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3 | ColumnmplsInSegmentNPop | read-create | current | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packe… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4 | ColumnmplsInSegmentAddrFamily | read-create | current | The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. This object can… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5 | ColumnmplsInSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6 | ColumnmplsInSegmentOwner | read-create | current | Denotes the entity that created and is responsible for managing this segment. This object cannot be modified if mplsInSegmentRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7 | ColumnmplsInSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8 | ColumnmplsInSegmentRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9 | ColumnmplsInSegmentStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsInSegmentRowStatus is active(1). If this variable is set to rea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4 | TablemplsInSegmentPerfTable | not-accessible | current | This table contains statistical information for incoming MPLS segments to an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1 | RowmplsInSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1 | ColumnmplsInSegmentOctets | read-only | current | This value represents the total number of octets received by this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2 | ColumnmplsInSegmentPackets | read-only | current | Total number of packets received by this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3 | ColumnmplsInSegmentErrors | read-only | current | The number of errored packets received on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4 | ColumnmplsInSegmentDiscards | read-only | current | The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being tr… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5 | ColumnmplsInSegmentHCOctets | read-only | current | The total number of octets received. This is the 64 bit version of mplsInSegmentOctets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6 | ColumnmplsInSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5 | ScalarmplsOutSegmentIndexNext | read-only | current | This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigne… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6 | TablemplsOutSegmentTable | not-accessible | current | This table contains a representation of the outgoing segments from an LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1 | RowmplsOutSegmentEntry | not-accessible | current | An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1 | ColumnmplsOutSegmentIndex | not-accessible | current | This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2 | ColumnmplsOutSegmentIfIndex | read-create | current | This value must contain the interface index of the outgoing interface. This object may only take the value of 0 during the create-and-wait row creation operati… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3 | ColumnmplsOutSegmentPushTopLabel | read-create | current | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true if the … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4 | ColumnmplsOutSegmentTopLabel | read-create | current | If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this va… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5 | ColumnmplsOutSegmentNextHopIpAddrType | read-create | current | Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6 | ColumnmplsOutSegmentNextHopIpv4Addr | read-create | current | IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it SHOULD return a value of 0. This obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7 | ColumnmplsOutSegmentNextHopIpv6Addr | read-create | current | IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it SHOULD return a value of 0. This obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8 | ColumnmplsOutSegmentXCIndex | read-only | current | Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9 | ColumnmplsOutSegmentOwner | read-create | current | Denotes the entity which created and is responsible for managing this segment. This object cannot be modified if mplsOutSegmentRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10 | ColumnmplsOutSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11 | ColumnmplsOutSegmentRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12 | ColumnmplsOutSegmentStorageType | read-create | current | This variable indicates the storage type for this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). If this variable is set to re… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7 | TablemplsOutSegmentPerfTable | not-accessible | current | This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the in… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1 | RowmplsOutSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1 | ColumnmplsOutSegmentOctets | read-only | current | This value contains the total number of octets sent on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2 | ColumnmplsOutSegmentPackets | read-only | current | This value contains the total number of packets sent on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3 | ColumnmplsOutSegmentErrors | read-only | current | Number of packets that could not be sent due to errors on this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4 | ColumnmplsOutSegmentDiscards | read-only | current | The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5 | ColumnmplsOutSegmentHCOctets | read-only | current | Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6 | ColumnmplsOutSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8 | ScalarmplsXCIndexNext | read-only | current | This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9 | TablemplsXCTable | not-accessible | current | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsL… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1 | RowmplsXCEntry | not-accessible | current | A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1 | ColumnmplsXCIndex | not-accessible | current | Primary index for the conceptual row identifying a group of cross-connect segments. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2 | ColumnmplsXCLspId | read-create | current | This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3 | ColumnmplsXCLabelStackIndex | read-create | current | Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4 | ColumnmplsXCIsPersistent | read-create | current | Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5 | ColumnmplsXCOwner | read-create | current | Denotes the entity that created and is responsible for managing this cross-connect. This object cannot be modified if mplsXCRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6 | ColumnmplsXCRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7 | ColumnmplsXCStorageType | read-create | current | Defines the storage type for this object. This object cannot be modified if mplsXCRowStatus is active(1). If this variable is set to readOnly(5), and the corre… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8 | ColumnmplsXCAdminStatus | read-create | current | The desired operational status of this segment. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9 | ColumnmplsXCOperStatus | read-only | current | The actual operational status of this cross- connect. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10 | ScalarmplsMaxLabelStackDepth | read-only | current | The maximum stack depth supported by this LSR. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11 | ScalarmplsLabelStackIndexNext | read-only | current | This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no un… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12 | TablemplsLabelStackTable | not-accessible | current | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1 | RowmplsLabelStackEntry | not-accessible | current | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1 | ColumnmplsLabelStackIndex | not-accessible | current | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2 | ColumnmplsLabelStackLabelIndex | not-accessible | current | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3 | ColumnmplsLabelStackLabel | read-create | current | The label to pushed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4 | ColumnmplsLabelStackRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5 | ColumnmplsLabelStackStorageType | read-create | current | Defines the storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13 | ScalarmplsTrafficParamIndexNext | read-only | current | This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicate… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14 | TablemplsTrafficParamTable | not-accessible | current | This table specifies the Traffic Parameter objects for in and out-segments. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1 | RowmplsTrafficParamEntry | not-accessible | current | An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1 | ColumnmplsTrafficParamIndex | not-accessible | current | Uniquely identifies this row of the table. Note that zero represents an invalid index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2 | ColumnmplsTrafficParamMaxRate | read-create | current | Maximum rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3 | ColumnmplsTrafficParamMeanRate | read-create | current | Mean rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4 | ColumnmplsTrafficParamMaxBurstSize | read-create | current | Maximum burst size in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5 | ColumnmplsTrafficParamRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6 | ColumnmplsTrafficParamStorageType | read-create | current | The storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15 | ScalarmplsXCTrapEnable | read-write | current | If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2 | NodemplsLsrNotifications | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0 | NodemplsLsrNotifyPrefix | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.1 | NotificationmplsXCUp | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some … | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.2 | NotificationmplsXCDown | current | This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from som… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3 | NodemplsLsrConformance | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1 | NodemplsLsrGroups | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.1 | GroupmplsInterfaceGroup | current | Collection of objects needed for MPLS interface configuration and performance information. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.2 | GroupmplsInSegmentGroup | current | Collection of objects needed to implement an in- segment. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.3 | GroupmplsOutSegmentGroup | current | Collection of objects needed to implement an out- segment. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.4 | GroupmplsXCGroup | current | Collection of objects needed to implement a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.5 | GroupmplsXCOptionalGroup | current | Collection of optional objects for implementing a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.6 | GroupmplsPerfGroup | current | Collection of objects providing performance information about an LSR. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.7 | GroupmplsHCInSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.8 | GroupmplsHCOutSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.9 | GroupmplsTrafficParamGroup | current | Object(s) required for supporting QoS resource reservation. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.10 | GroupmplsXCIsPersistentGroup | current | Objects needed to support persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.11 | GroupmplsXCIsNotPersistentGroup | current | Objects needed to support non-persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.12 | GroupmplsLabelStackGroup | current | Objects needed to support label stacking. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.13 | GroupmplsSegmentDiscontinuityGroup | current | A collection of objects providing information specific to segment discontinuities.. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.14 | GroupmplsLsrNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2 | NodemplsLsrCompliances | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2.1 | CompliancemplsLsrModuleCompliance | read-only | current | Compliance statement for agents that support the MPLS LSR MIB. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3 | IdentitymplsTeMIB | This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC … | ||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1 | NodemplsTeScalars | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.1 | ScalarmplsTunnelConfigured | read-only | current | The number of tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus is active(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.2 | ScalarmplsTunnelActive | read-only | current | The number of tunnels active on this device. A tunnel is considered active if the mplsTunnelOperStatus is up(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.3 | ScalarmplsTunnelTEDistProto | read-only | current | The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.4 | ScalarmplsTunnelMaxHops | read-only | current | The maximum number of hops that can be specified for a tunnel on this device. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2 | NodemplsTeObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.1 | ScalarmplsTunnelIndexNext | read-only | current | This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in mplsTunnelTable. If the number of unassigned entries is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2 | TablemplsTunnelTable | not-accessible | current | The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1 | RowmplsTunnelEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling pro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.1 | ColumnmplsTunnelIndex | not-accessible | current | Uniquely identifies this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.2 | ColumnmplsTunnelInstance | not-accessible | current | Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.3 | ColumnmplsTunnelIngressLSRId | not-accessible | current | The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value SHOULD mimic the Extende… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.4 | ColumnmplsTunnelEgressLSRId | not-accessible | current | Specifies the egress LSR ID. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.5 | ColumnmplsTunnelName | read-create | current | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the if… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.6 | ColumnmplsTunnelDescr | read-create | current | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.7 | ColumnmplsTunnelIsIf | read-create | current | Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the if… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.8 | ColumnmplsTunnelIfIndex | read-only | current | If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this varia… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.9 | ColumnmplsTunnelXCPointer | read-create | current | This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characteristics, and relationships to each… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.10 | ColumnmplsTunnelSignallingProto | read-create | current | The signaling protocol, if any, which was used to setup this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11 | ColumnmplsTunnelSetupPrio | read-create | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.12 | ColumnmplsTunnelHoldingPrio | read-create | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.13 | ColumnmplsTunnelSessionAttributes | read-create | current | This bitmask indicates optional session values for this tunnel. The following describes these bitfields: fastRerouteThis flag indicates that the any tunnel hop… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.14 | ColumnmplsTunnelOwner | read-create | current | Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(2) and crldp(3) should not be used at the head-end of a MPLS tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.15 | ColumnmplsTunnelLocalProtectInUse | read-create | current | Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.16 | ColumnmplsTunnelResourcePointer | read-create | current | This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the mplsTunnelResourceEntry to i… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.17 | ColumnmplsTunnelInstancePriority | read-create | current | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instance… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.18 | ColumnmplsTunnelHopTableIndex | read-create | current | Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.19 | ColumnmplsTunnelARHopTableIndex | read-only | current | Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.20 | ColumnmplsTunnelCHopTableIndex | read-only | current | Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.21 | ColumnmplsTunnelPrimaryInstance | read-only | current | Specifies the instance index of the primary instance of this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.22 | ColumnmplsTunnelPrimaryTimeUp | read-only | current | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mplsTunnelPrimaryInstance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.23 | ColumnmplsTunnelPathChanges | read-only | current | Specifies the number of times the paths has changed for this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.24 | ColumnmplsTunnelLastPathChange | read-only | current | Specifies the time since the last path change for this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.25 | ColumnmplsTunnelCreationTime | read-only | current | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.26 | ColumnmplsTunnelStateTransitions | read-only | current | Specifies the number of times the state of this tunnel instance has changed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.27 | ColumnmplsTunnelIncludeAnyAffinity | read-create | current | A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.28 | ColumnmplsTunnelIncludeAllAffinity | read-create | current | A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the constraint. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.29 | ColumnmplsTunnelExcludeAllAffinity | read-create | current | A link satisfies the exclude-all constraint if and only if the link contains none of the adminstrative groups specifie in the constraint. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.30 | ColumnmplsTunnelPathInUse | read-create | current | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into mplsTunnelHopTable. This path may not exac… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.31 | ColumnmplsTunnelRole | read-create | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.32 | ColumnmplsTunnelTotalUpTime | read-create | current | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.33 | ColumnmplsTunnelInstanceUpTime | read-create | current | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.34 | ColumnmplsTunnelAdminStatus | read-create | current | Indicates the desired operational status of this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.35 | ColumnmplsTunnelOperStatus | read-only | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.36 | ColumnmplsTunnelRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.37 | ColumnmplsTunnelStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3 | ScalarmplsTunnelHopListIndexNext | read-only | current | This object contains an appropriate value to be used for mplsTunnelHopListIndex when creating entries in the mplsTunnelHopTable. If the number of unassigned en… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4 | TablemplsTunnelHopTable | not-accessible | current | The mplsTunnelHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, when it is established via signaling, for … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1 | RowmplsTunnelHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.1 | ColumnmplsTunnelHopListIndex | not-accessible | current | Primary index into this table identifying a particular explicit route object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.2 | ColumnmplsTunnelHopPathOptionIndex | not-accessible | current | Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.3 | ColumnmplsTunnelHopIndex | not-accessible | current | Secondary index into this table identifying a particular hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.4 | ColumnmplsTunnelHopAddrType | read-create | current | Denotes the address type of this tunnel hop. Note that lspId(4) is a valid option only for tunnels signaled via CRLDP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.5 | ColumnmplsTunnelHopIpv4Addr | read-create | current | If mplsTunnelHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. If mplsTunnelHopAddrType is set to lspid(4), then this v… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.6 | ColumnmplsTunnelHopIpv4PrefixLen | read-create | current | If mplsTunnelHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.7 | ColumnmplsTunnelHopIpv6Addr | read-create | current | If the mplsTunnelHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should con… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.8 | ColumnmplsTunnelHopIpv6PrefixLen | read-create | current | If mplsTunnelHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.9 | ColumnmplsTunnelHopAsNumber | read-create | current | If mplsTunnelHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should conta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.10 | ColumnmplsTunnelHopLspId | read-create | current | If mplsTunnelHopAddrType is set to lspid(4), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.11 | ColumnmplsTunnelHopType | read-create | current | Denotes whether this tunnel hop is routed in a strict or loose fashion. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.12 | ColumnmplsTunnelHopIncludeExclude | read-create | current | If this value is set to include(1), then this indicates that this hop must be included in the tunnel's path. If this value is set to exclude(2), then this hop … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.13 | ColumnmplsTunnelHopPathOptionName | read-create | current | The description of this series of hops as they relate to the specified path option. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.14 | ColumnmplsTunnelHopEntryPathComp | read-create | current | If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.15 | ColumnmplsTunnelHopRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.16 | ColumnmplsTunnelHopStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.5 | ScalarmplsTunnelResourceIndexNext | read-only | current | This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of u… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6 | TablemplsTunnelResourceTable | not-accessible | current | The mplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a si… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1 | RowmplsTunnelResourceEntry | not-accessible | current | An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.1 | ColumnmplsTunnelResourceIndex | not-accessible | current | Uniquely identifies this row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.2 | ColumnmplsTunnelResourceMaxRate | read-create | current | The maximum rate in bits/second. Note that setting mplsTunnelResourceMaxRate, mplsTunnelResourceMeanRate, and mplsTunnelResourceMaxBurstSize to 0 indicates bes… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.3 | ColumnmplsTunnelResourceMeanRate | read-create | current | This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the correspond… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.4 | ColumnmplsTunnelResourceMaxBurstSize | read-create | current | The maximum burst size in bytes. This object is copied to mplsInSegmentMaxBurstSize of the corresponding in-segment. When resource allocation is performed as r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.5 | ColumnmplsTunnelResourceMeanBurstSize | read-create | current | The mean burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.6 | ColumnmplsTunnelResourceExcessBurstSize | read-create | current | The Excess burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this val… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.7 | ColumnmplsTunnelResourceFrequency | read-create | current | The granularity of the availability of committed rate. The implementations which do not implement this variable must return unspecified(1) for this value and m… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.8 | ColumnmplsTunnelResourceWeight | read-create | current | The relative weight for using excess bandwidth above its committed rate. The value of 0 means that weight is not applicable for the CR-LSP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.9 | ColumnmplsTunnelResourceRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.10 | ColumnmplsTunnelResourceStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7 | TablemplsTunnelARHopTable | not-accessible | current | The mplsTunnelARHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signaling protoc… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1 | RowmplsTunnelARHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.1 | ColumnmplsTunnelARHopListIndex | not-accessible | current | Primary index into this table identifying a particular recorded hop list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.2 | ColumnmplsTunnelARHopIndex | not-accessible | current | Secondary index into this table identifying the particular hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.3 | ColumnmplsTunnelARHopAddrType | read-only | current | Denotes the address type of this tunnel hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.4 | ColumnmplsTunnelARHopIpv4Addr | read-only | current | If mplsTunnelARHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should cont… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.5 | ColumnmplsTunnelARHopIpv4PrefixLen | read-only | current | If mplsTunnelARHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and shoul… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.6 | ColumnmplsTunnelARHopIpv6Addr | read-only | current | If the mplsTunnelARHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.7 | ColumnmplsTunnelARHopIpv6PrefixLen | read-only | current | If mplsTunnelARHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.8 | ColumnmplsTunnelARHopAsNumber | read-only | current | If mplsTunnelARHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should con… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.9 | ColumnmplsTunnelARHopLspId | read-only | current | If mplsTunnelARHopAddrType is set to lspid(4), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8 | TablemplsTunnelCHopTable | not-accessible | current | The mplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as computed by a constraint- based routin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1 | RowmplsTunnelCHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry in this table is created by a constraint- based routing protocol based on the hops specified in the co… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.1 | ColumnmplsTunnelCHopListIndex | not-accessible | current | Primary index into this table identifying a particular computed hop list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.2 | ColumnmplsTunnelCHopIndex | not-accessible | current | Secondary index into this table identifying the particular hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.3 | ColumnmplsTunnelCHopAddrType | read-only | current | Denotes the address type of this tunnel hop. Note that lspId(4) is a valid option only for tunnels signaled via CRLDP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.4 | ColumnmplsTunnelCHopIpv4Addr | read-only | current | If mplsTunnelCHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should conta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.5 | ColumnmplsTunnelCHopIpv4PrefixLen | read-only | current | If mplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.6 | ColumnmplsTunnelCHopIpv6Addr | read-only | current | If the mplsTunnelCHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should co… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.7 | ColumnmplsTunnelCHopIpv6PrefixLen | read-only | current | If mplsTunnelCHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.8 | ColumnmplsTunnelCHopAsNumber | read-only | current | If mplsTunnelCHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should cont… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.9 | ColumnmplsTunnelCHopLspId | read-only | current | If mplsTunnelCHopAddrType is set to lspid(4), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.10 | ColumnmplsTunnelCHopType | read-only | current | Denotes whether this is tunnel hop is routed in a strict or loose fashion. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9 | TablemplsTunnelPerfTable | not-accessible | current | This table provides per-tunnel MPLS performance information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1 | RowmplsTunnelPerfEntry | not-accessible | current | An entry in this table is created by the LSR for every tunnel. Its is an extension to mplsTunnelEntry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.1 | ColumnmplsTunnelPerfPackets | read-only | current | Number of packets forwarded by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.2 | ColumnmplsTunnelPerfHCPackets | read-only | current | High capacity counter for number of packets forwarded by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.3 | ColumnmplsTunnelPerfErrors | read-only | current | Number of errored packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.4 | ColumnmplsTunnelPerfBytes | read-only | current | Number of bytes forwarded by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.5 | ColumnmplsTunnelPerfHCBytes | read-only | current | High capacity counter for number of bytes forwarded by the tunnel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10 | TablemplsTunnelCRLDPResTable | not-accessible | current | The mplsTunnelCRLDPResTable allows a manager to specify which CR-LDP-specific resources are desired for an MPLS tunnel if that tunnel is signaled using CR-LDP.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1 | RowmplsTunnelCRLDPResEntry | not-accessible | current | An entry in this table represents a set of resources for an MPLS tunnel established using CRLDP (mplsTunnelSignallingProto equal to crldp (3)). An entry can be… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.2 | ColumnmplsTunnelCRLDPResMeanBurstSize | read-create | current | The mean burst size in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.3 | ColumnmplsTunnelCRLDPResExcessBurstSize | read-create | current | The Excess burst size in bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.4 | ColumnmplsTunnelCRLDPResFrequency | read-create | current | The granularity of the availability of committed rate. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.5 | ColumnmplsTunnelCRLDPResWeight | read-create | current | The relative weight for using excess bandwidth above its committed rate. The value of 0 means that weight is not applicable for the CR-LSP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.6 | ColumnmplsTunnelCRLDPResFlags | read-create | current | The value of the 1 byte Flags conveyed as part of the traffic parameters during the establishment of the CRLSP. The bits in this object are to be interpreted a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.7 | ColumnmplsTunnelCRLDPResRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.8 | ColumnmplsTunnelCRLDPResStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.11 | ScalarmplsTunnelTrapEnable | read-write | current | If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3 | NodemplsTeNotifications | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0 | NodemplsTeNotifyPrefix | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.1 | NotificationmplsTunnelUp | current | This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some o… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.2 | NotificationmplsTunnelDown | current | This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.3 | NotificationmplsTunnelRerouted | current | This notification is generated when a tunnel is rerouted. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some ti… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.4 | NotificationmplsTunnelReoptimized | current | This notification is generated when a tunnel is reoptimized. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4 | NodemplsTeConformance | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1 | NodemplsTeGroups | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.1 | GroupmplsTunnelGroup | current | Necessary, but not sufficient, set of objects to implement tunnels. In addition, depending on the type of the tunnels supported (for example, manually configur… | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.2 | GroupmplsTunnelManualGroup | current | Object(s) needed to implement manually configured tunnels. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.3 | GroupmplsTunnelSignaledGroup | current | Object needed to implement signaled tunnels. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.4 | GroupmplsTunnelScalarGroup | current | Scalar object needed to implement MPLS tunnels. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.5 | GroupmplsTunnelIsIntfcGroup | current | Objects needed to implement tunnels that are interfaces. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.6 | GroupmplsTunnelIsNotIntfcGroup | current | Objects needed to implement tunnels that are not interfaces. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.7 | GroupmplsTunnelOptionalGroup | current | The objects in this group are optional. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.8 | GroupmplsTunnelCRLDPResOptionalGroup | current | Set of objects implemented for resources applicable for tunnels signaled using CR-LDP. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.9 | GroupmplsTeNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.2 | NodemplsTeCompliances | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.2.1 | CompliancemplsTeModuleCompliance | read-only | current | Compliance statement for agents that support the MPLS TE MIB. |
| 1.3.6.1.4.1.11.2.3.7.11.13 | NodehpSwitch9308 | |||
| 1.3.6.1.4.1.11.2.3.7.11.14 | NodehpSwitch9304 | |||
| 1.3.6.1.4.1.11.2.3.7.11.15 | NodehpSwitch6308 | |||
| 1.3.6.1.4.1.11.2.3.7.11.16 | NodehpSwitch6208 | |||
| 1.3.6.1.4.1.11.2.3.7.11.28 | NodehpSwitch9315 | |||
| 1.3.6.1.4.1.11.3 | NodesnTrapOspfIfStateChange | An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface… | ||
| 1.3.6.1.4.1.11.4 | NodesnTrapOspfVirtIfStateChange | An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- fac… | ||
| 1.3.6.1.4.1.11.5 | NodesnOspfNbrStateChange | An ospfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor… | ||
| 1.3.6.1.4.1.11.6 | NodesnOspfVirtNbrStateChange | An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor st… | ||
| 1.3.6.1.4.1.11.7 | NodesnOspfIfConfigError | An ospfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with thi… | ||
| 1.3.6.1.4.1.11.8 | NodesnOspfVirtIfConfigError | An ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this rout… | ||
| 1.3.6.1.4.1.11.9 | NodesnOspfIfAuthFailure | An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type … | ||
| 1.3.6.1.4.1.11.10 | NodesnOspfVirtIfAuthFailure | An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type … | ||
| 1.3.6.1.4.1.11.11 | NodesnOspfIfRxBadPacket | An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed. | ||
| 1.3.6.1.4.1.11.12 | NodesnOspfVirtIfRxBadPacket | An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed. | ||
| 1.3.6.1.4.1.11.13 | NodesnOspfTxRetransmit | An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associat… | ||
| 1.3.6.1.4.1.11.14 | NodeospfVirtIfTxRetransmit | An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated wi… | ||
| 1.3.6.1.4.1.11.15 | NodesnOspfOriginateLsa | An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happe… | ||
| 1.3.6.1.4.1.11.16 | NodesnOspfMaxAgeLsa | An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge. | ||
| 1.3.6.1.4.1.11.17 | NodesnOspfLsdbOverflow | An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded ospfExtLsdbLimit. | ||
| 1.3.6.1.4.1.11.18 | NodesnOspfLsdbApproachingOverflow | An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit. | ||
| 1.3.6.1.4.1.11.19 | NodesnTrapL4MaxSessionLimitReached | The SNMP trap that is generated when the maximum number of connections reached. | ||
| 1.3.6.1.4.1.11.20 | NodesnTrapL4TcpSynLimitReached | The SNMP trap that is generated when the number of TCP SYN limits reached. | ||
| 1.3.6.1.4.1.11.21 | NodesnTrapL4RealServerUp | The SNMP trap that is generated when the load balancing real server is up. | ||
| 1.3.6.1.4.1.11.22 | NodesnTrapL4RealServerDown | The SNMP trap that is generated when the load balancing real server is down. | ||
| 1.3.6.1.4.1.11.23 | NodesnTrapL4RealServerPortUp | The SNMP trap that is generated when the load balancing real server TCP port is up. | ||
| 1.3.6.1.4.1.11.24 | NodesnTrapL4RealServerPortDown | The SNMP trap that is generated when the load balancing real server TCP port is down. | ||
| 1.3.6.1.4.1.11.25 | NodesnTrapL4RealServerMaxConnectionLimitReached | The SNMP trap that is generated when the real server reaches maximum number of connections. | ||
| 1.3.6.1.4.1.11.26 | NodesnTrapL4BecomeStandby | The SNMP trap that is generated when the server load balancing switch changes state from active to standby. | ||
| 1.3.6.1.4.1.11.27 | NodesnTrapL4BecomeActive | The SNMP trap that is generated when the server load balancing switch changes state from standby to active. | ||
| 1.3.6.1.4.1.11.28 | NodesnTrapModuleInserted | The SNMP trap that is generated when a module was inserted to the chassis during system running. | ||
| 1.3.6.1.4.1.11.29 | NodesnTrapModuleRemoved | The SNMP trap that is generated when a module was removed from the chassis during system running. | ||
| 1.3.6.1.4.1.11.30 | NodesnTrapChasPwrSupplyFailed | The SNMP trap that is generated when a power supply operational status changed from normal to failure. | ||
| 1.3.6.1.4.1.11.31 | NodesnTrapChasFanFailed | The SNMP trap that is generated when a fan fails to operate normally. | ||
| 1.3.6.1.4.1.11.32 | NodesnTrapLockedAddressViolation2 | The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port. | ||
| 1.3.6.1.4.1.11.33 | NodesnTrapFsrpIfStateChange | The SNMP trap that is generated when a FSRP routing device changed state from active to standby or vice-versa. | ||
| 1.3.6.1.4.1.11.34 | NodesnTrapVrrpIfStateChange | The SNMP trap that is generated when a VRRP routing device switched between states master, backup, intialized or uknown. | ||
| 1.3.6.1.4.1.11.35 | NodesnTrapMgmtModuleRedunStateChange | The SNMP trap that is generated when the management module changes redundancy state. | ||
| 1.3.6.1.4.1.11.36 | NodesnTrapTemperatureWarning | The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold. | ||
| 1.3.6.1.4.1.11.37 | NodesnTrapAccessListDeny | The SNMP trap that is generated when a packet was denied by an access list. | ||
| 1.3.6.1.4.1.11.38 | NodesnTrapMacFilterDeny | The SNMP trap that is generated when a packet was denied by a MAC address filter. | ||
| 1.3.6.1.4.1.11.39 | NodesnTrapL4GslbRemoteUp | The SNMP trap that is generated when the connection to the remote SI is established. | ||
| 1.3.6.1.4.1.11.40 | NodesnTrapL4GslbRemoteDown | The SNMP trap that is generated when the connection to the remote SI is down. | ||
| 1.3.6.1.4.1.11.41 | NodesnTrapL4GslbRemoteControllerUp | The SNMP trap that is generated when the connection to the GSLB SI is established. | ||
| 1.3.6.1.4.1.11.42 | NodesnTrapL4GslbRemoteControllerDown | The SNMP trap that is generated when the connection to the GSLB SI is down. | ||
| 1.3.6.1.4.1.11.43 | NodesnTrapL4GslbHealthCheckIpUp | The SNMP trap that is generated when GSLB health check for an address transitions from down to active state. | ||
| 1.3.6.1.4.1.11.44 | NodesnTrapL4GslbHealthCheckIpDown | The SNMP trap that is generated when GSLB health check for an address transitions from active to down state. | ||
| 1.3.6.1.4.1.11.45 | NodesnTrapL4GslbHealthCheckIpPortUp | The SNMP trap that is generated when a given port for a health check address is up. | ||
| 1.3.6.1.4.1.11.46 | NodesnTrapL4GslbHealthCheckIpPortDown | The SNMP trap that is generated when a given port for a health check address is down. | ||
| 1.3.6.1.4.1.11.47 | NodesnTrapL4FirewallBecomeStandby | The SNMP trap that is generated when the server load balancing switch Firewall changes state from active to standby. | ||
| 1.3.6.1.4.1.11.48 | NodesnTrapL4FirewallBecomeActive | The SNMP trap that is generated when the server load balancing switch Firewall changes state from standby to active. | ||
| 1.3.6.1.4.1.11.49 | NodesnTrapL4FirewallPathUp | The SNMP trap that is generated when the server load balancing switch Firewall path is up. | ||
| 1.3.6.1.4.1.11.50 | NodesnTrapL4FirewallPathDown | The SNMP trap that is generated when the server load balancing switch Firewall path is down. | ||
| 1.3.6.1.4.1.11.51 | NodesnTrapIcmpLocalExceedBurst | The SNMP trap that is generated when incoming ICMP exceeds burst-MAX. | ||
| 1.3.6.1.4.1.11.52 | NodesnTrapIcmpTransitExceedBurst | The SNMP trap that is generated when transit ICMP exceeds burst-MAX. | ||
| 1.3.6.1.4.1.11.53 | NodesnTrapTcpLocalExceedBurst | The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX. | ||
| 1.3.6.1.4.1.11.54 | NodesnTrapTcpTransitExceedBurst | The SNMP trap that is generated when transit TCP exceeds burst-MAX. | ||
| 1.3.6.1.4.1.11.55 | NodesnTrapL4ContentVerification | The SNMP trap that is generated when the HTTP match-list pattern is found. | ||
| 1.3.6.1.4.1.11.56 | NodesnTrapDuplicateIp | Duplicate IP address detected. | ||
| 1.3.6.1.4.1.11.57 | NodesnTrapMplsProblem | MPLS Problem Detected. | ||
| 1.3.6.1.4.1.11.58 | NodesnTrapMplsException | MPLS Exception Detected. | ||
| 1.3.6.1.4.1.11.59 | NodesnTrapMplsAudit | MPLS Audit Trap. | ||
| 1.3.6.1.4.1.11.60 | NodesnTrapMplsDeveloper | MPLS Developer Trap. | ||
| 1.3.6.1.4.1.11.61 | NodesnTrapNoBmFreeQueue | The SNMP trap that is generated when no free queue is available in buffer manager. | ||
| 1.3.6.1.4.1.11.62 | NodesnTrapSmcDmaDrop | The SNMP trap that is generated when SMC DMA packet is dropped. | ||
| 1.3.6.1.4.1.11.63 | NodesnTrapSmcBpDrop | The SNMP trap that is generated when SMC BackPlane packet is dropped. | ||
| 1.3.6.1.4.1.11.64 | NodesnTrapBmWriteSeqDrop | The SNMP trap that is generated when BM write sequence packet is dropped. | ||
| 1.3.6.1.4.1.11.65 | NodesnTrapBgpPeerUp | The SNMP trap that is generated when the bgp peer is up. | ||
| 1.3.6.1.4.1.11.66 | NodesnTrapBgpPeerDown | The SNMP trap that is generated when the bgp peer is down. | ||
| 1.3.6.1.4.1.11.67 | NodesnTrapL4RealServerResponseTimeLowerLimit | The SNMP trap that is generated when the real server average response time exceeds lower threshold. | ||
| 1.3.6.1.4.1.11.68 | NodesnTrapL4RealServerResponseTimeUpperLimit | The SNMP trap that is generated when the real server average response time exceeds upper threshold. | ||
| 1.3.6.1.4.1.11.69 | NodesnTrapL4TcpAttackRateExceedMax | The SNMP trap that is generated when the TCP attack rate exceeds configured maximum. | ||
| 1.3.6.1.4.1.11.70 | NodesnTrapL4TcpAttackRateExceedThreshold | The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum. | ||
| 1.3.6.1.4.1.11.71 | NodesnTrapL4ConnectionRateExceedMax | The SNMP trap that is generated when the L4 connection rate exceeds configured maximum. | ||
| 1.3.6.1.4.1.11.72 | NodesnTrapL4ConnectionRateExceedThreshold | The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum | ||
| 1.3.6.1.4.1.11.73 | NodesnTrapRunningConfigChanged | The SNMP trap that is generated when the running configuration was changed. | ||
| 1.3.6.1.4.1.11.74 | NodesnTrapStartupConfigChanged | The SNMP trap that is generated when the startup configuration was changed. | ||
| 1.3.6.1.4.1.11.75 | NodesnTrapUserLogin | The SNMP trap that is generated when user login. | ||
| 1.3.6.1.4.1.11.76 | NodesnTrapUserLogout | The SNMP trap that is generated when user logout. | ||
| 1.3.6.1.4.1.11.77 | NodesnTrapPortSecurityViolation | The SNMP trap that is generated when insecure MAC addresses are received from a port with MAC security feature enabled. | ||
| 1.3.6.1.4.1.11.78 | NodesnTrapPortSecurityShutdown | The SNMP trap that is generated when insecure MAC addresses are received from a port caused the port to shutdown. | ||
| 1.3.6.1.4.1.11.79 | NodesnTrapMrpStateChange | The SNMP trap that is generated when a MRP switching and routing device changed state to disabled, blocking, preforwarding, forwarding, uknown. | ||
| 1.3.6.1.4.1.11.80 | NodesnTrapMrpCamError | The SNMP trap that is generated when a MRP Cam Error occurs. | ||
| 1.3.6.1.4.1.11.81 | NodesnTrapChasPwrSupplyOK | The SNMP trap that is generated when a power supply operational status changed from failure to normal. | ||
| 1.3.6.1.4.1.11.82 | NodesnTrapVrrpeIfStateChange | The SNMP trap that is generated when a VRRPE routing device switched between states master, backup, intialized or uknown. | ||
| 1.3.6.1.4.1.11.83 | NodesnTrapVsrpIfStateChange | The SNMP trap that is generated when a VSRP switching and routing device switched between states master, backup, intialized or uknown. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsAtmVcIdentifier | Integer32 (32..65535) | current | The VCI value for a VCL. The maximum VCI value cannot exceed the value allowable by atmInterfaceMaxVciBits defined in ATM-MIB. The minimum value is 32, values 0 to 31 are reserved for other uses by the ITU and ATM Forum… |
| MplsBitRate | Integer32 (1..2147483647) | current | An estimate of bandwidth in units of 1,000 bits per second. If this object reports a value of 'n' then the rate of the object is somewhere in the range of 'n-500' to 'n+499'. For objects which do not vary in bit rate, o… |
| MplsBurstSize | Unsigned32 (1..4294967295) | current | The number of octets of MPLS data that the stream may send back-to-back without concern for policing. |
| MplsExtendedTunnelId | Unsigned32 | current | A unique identifier for an MPLS Tunnel. This MAY represent an IpV4 address of the ingress or egress LSR for the tunnel. This value is derived from the Extended Tunnel Id in RSVP or the Ingress Router ID for CR-LDP. |
| MplsInitialCreationSource | INTEGER { other(1), snmp(2), ldp(3), rsvp(4), crldp(5), policyAgent(6), unknown (7) } | current | The entity that originally created the object in question. The values of this enumeration are defined as follows: other(1) - This is used when an entity which has not been enumerated in this textual convention but which… |
| MplsLabel | Unsigned32 (0..4294967295) | current | This value represents an MPLS label as defined in [RFC3031], [RFC3032], [RFC3034] and [RFC3035]. |
| MplsLdpGenAddr | OCTET STRING (SIZE (0..64)) | current | The value of an network layer or data link layer address. |
| MplsLdpIdentifier | OCTET STRING (SIZE (6)) | current | The LDP identifier is a six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets identify the LSR and must be a globally unique value, such as a 32-bit router ID assig… |
| MplsLdpLabelTypes | INTEGER { generic(1), atm(2), frameRelay(3) } | current | The Layer 2 label types which are defined for MPLS LDP/CRLDP are generic(1), atm(2), or frameRelay(3). |
| MplsLSPID | OCTET STRING (SIZE (0..31)) | current | An identifier that is assigned to each LSP and is used to uniquely identify it. This is assigned at the head end of the LSP and can be used by all LSRs to identify this LSP. This value is piggybacked by the signaling pr… |
| MplsLsrIdentifier | OCTET STRING (SIZE (4)) | current | The Label Switch Router (LSR) identifier is the first 4 bytes of the Label Distribution Protocol (LDP) identifier. |
| MplsPathIndex | Unsigned32 | current | A unique identifier used to identify a specific path used by a tunnel. |
| MplsPathIndexOrZero | Unsigned32 | current | A unique identifier used to identify a specific path used by a tunnel. If this value is set to 0, it indicates that no path is in use. |
| MplsPortNumber | Integer32 (0..65535) | current | A TCP or UDP port number. Along with an IP address identifies a stream of IP traffic uniquely. |
| MplsTunnelAffinity | Unsigned32 | current | Include-any, include-all, or exclude-all constraint for link selection. |
| MplsTunnelIndex | Integer32 (1..65535) | current | Index into mplsTunnelTable. |
| MplsTunnelInstanceIndex | Unsigned32 (0..65535) | current | Instance index into mplsTunnelTable. |