MIB Viewer

HPE-Physicaldescription-MIB

113 objects
The private MIB module definition for physical device configuration.
Imported Objects
ENTITY-SENSOR-MIBEntitySensorStatus EntitySensorValue
HPE-DEVICEPARAMS-MIBrndErrorDesc rndErrorSeverity
HPE-HWENVIROMENTRlEnvMonState
HPE-MIBnm rndNotifications
IF-MIBifIndex InterfaceIndex InterfaceIndexOrZero
MAU-MIBJackType
Q-BRIDGE-MIBPortList
SNMPv2-SMIMODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString PhysAddress RowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.0.186NotificationrlStackUnitRemovedcurrentTrap indicating that a unit was removed from the stack.
1.3.6.1.4.1.11.2.0.187NotificationrlStackConfigChangedRingChaincurrentTrap indicating that the configuration of the stack has changed. - from ring to chain - from chain to ring.
1.3.6.1.4.1.11.2.0.188NotificationrlStackBackupUnitRemovedcurrentTrap indicating that the backup unit was removed from the stack.
1.3.6.1.4.1.11.2.0.189NotificationrlStackControllerSwitchovercurrentTrap indicating that a new controller was elected. The old maste is the backup now.
1.3.6.1.4.1.11.2.0.190NotificationrlStackUnitDifferentSwVersioncurrentTrap indicating that the new unit added to the stack has different software version than the controller.
1.3.6.1.4.1.11.2.0.191NotificationrlStackDuplicateUnitNotJoincurrentTrap indicating that a new unit with duplicated unit id was added to the stack - but it will not join the stack.
1.3.6.1.4.1.11.2.0.195NotificationrlStackLinkChangecurrentTrap indicating that Link has change in one of the Stacking Ports.
1.3.6.1.4.1.89.53.4.1.3IdentityrlPhysicalDescriptionThe private MIB module definition for physical device configuration.
1.3.6.1.4.1.89.53.4.1.3.5TablerlPhdModuleHotSwapTablenot-accessiblecurrentFor each module (board) there is an entry describing its Hot Swap status
1.3.6.1.4.1.89.53.4.1.3.5.1RowrlPhdModuleHotSwapEntrynot-accessiblecurrentA entry of this table specifies a module (board) Hot Swap status
1.3.6.1.4.1.89.53.4.1.3.5.1.1ColumnrlPhdModuleHotSwapAdminStatusread-writecurrentThe desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state …
1.3.6.1.4.1.89.53.4.1.3.5.1.2ColumnrlPhdModuleHotSwapOperStatusread-onlycurrentThe current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwa…
1.3.6.1.4.1.89.53.4.1.3.6TablerlPhdStackOrderTablenot-accessiblecurrentThis table enables the user to configure the order of the stack units as displayed on his GUI. The order of the entries in this table corresponds to the last c…
1.3.6.1.4.1.89.53.4.1.3.6.1RowrlPhdStackOrderEntrynot-accessiblecurrentA entry of this table specifies a stack unit in the position desired by the user
1.3.6.1.4.1.89.53.4.1.3.6.1.1ColumnrlPhdStackOrderCurrentUnitPositionnot-accessiblecurrentThe current stack unit position.
1.3.6.1.4.1.89.53.4.1.3.6.1.2ColumnrlPhdStackOrderDesiredUnitPositionread-writecurrentThe desired stack unit position. Note that setting this MIB object will take effect only after setting the rlPhdStackReorder MIB object below. After setting th…
1.3.6.1.4.1.89.53.4.1.3.6.1.3ColumnrlPhdStackOrderUnitIndexnot-accessiblecurrentThis is the original unit index, i.e. has the same value as rlPhdStackUnit above.
1.3.6.1.4.1.89.53.4.1.3.6.1.4ColumnrlPhdStackOrderUnitTyperead-onlycurrentThe type of the stack unit described by this entry. It has the same value as rlPhdStackType above. This information is duplicated here only for easier retrieva…
1.3.6.1.4.1.89.53.4.1.3.7ScalarrlPhdStackReorderread-writecurrentSetting this MIB object will cause the settings of the rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect. After setting this MIB object an…
1.3.6.1.4.1.89.53.4.1.3.8ScalarrlPhdNumberOfUnitsread-onlycurrentShows the current number of units in the stack.
1.3.6.1.4.1.89.53.4.1.3.9ScalarrlPhdMaxNumberOfUnitsread-onlycurrentShows the maximum number of units in the stack.
1.3.6.1.4.1.89.53.4.1.3.10ScalarrlPhdForceControllerUnitread-writecurrentForce unit to be controller.
1.3.6.1.4.1.89.53.4.1.3.11ScalarrlPhdStackFixedUnitread-writecurrentDetermine which unit will be on bottom/top of list on Show-List command(see .
1.3.6.1.4.1.89.53.4.1.3.12ScalarrlPhdStackFixedUnitLocationread-writecurrentDetermine the bottom/top object in the stack table.
1.3.6.1.4.1.89.53.4.1.3.13ScalarrlPhdStackReloadUnitread-writecurrentReset a specific unit.
1.3.6.1.4.1.89.53.4.1.3.14TablerlPhdUnitGenParamTablenot-accessiblecurrentFor each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.4.1.3.14.1RowrlPhdUnitGenParamEntrynot-accessiblecurrentA entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.4.1.3.14.1.1ColumnrlPhdUnitGenParamStackUnitread-onlycurrentThe index of the stack unit to which this conceptual row corresponds.
1.3.6.1.4.1.89.53.4.1.3.14.1.2ColumnrlPhdUnitGenParamSoftwareVersionread-onlycurrentSerial number of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.3ColumnrlPhdUnitGenParamFirmwareVersionread-onlycurrentSerial number of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.4ColumnrlPhdUnitGenParamHardwareVersionread-onlycurrentSerial number of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.5ColumnrlPhdUnitGenParamSerialNumread-writecurrentSerial number of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.6ColumnrlPhdUnitGenParamAssetTagread-writecurrentSerial number of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.7ColumnrlPhdUnitGenParamServiceTagread-onlycurrentAsset tag of the product.
1.3.6.1.4.1.89.53.4.1.3.14.1.8ColumnrlPhdUnitGenParamSoftwareDateread-onlycurrentDate of product's software.
1.3.6.1.4.1.89.53.4.1.3.14.1.9ColumnrlPhdUnitGenParamFirmwareDateread-onlycurrentDate of product's firmware.
1.3.6.1.4.1.89.53.4.1.3.14.1.10ColumnrlPhdUnitGenParamManufacturerread-onlycurrentProduct's Manufacturer.
1.3.6.1.4.1.89.53.4.1.3.14.1.11ColumnrlPhdUnitGenParamModelNameread-onlycurrentModel Name.
1.3.6.1.4.1.89.53.4.1.3.14.1.12ColumnrlPhdUnitGenParamMd5ChksumBootread-onlycurrentMD5 Checksum for Boot
1.3.6.1.4.1.89.53.4.1.3.14.1.13ColumnrlPhdUnitGenParamMd5ChksumImage1read-onlycurrentMD5 Checksum for Image 1
1.3.6.1.4.1.89.53.4.1.3.14.1.14ColumnrlPhdUnitGenParamMd5ChksumImage2read-onlycurrentMD5 Checksum for Image 2
1.3.6.1.4.1.89.53.4.1.3.14.1.15ColumnrlPhdUnitGenParamRegistrationDoneread-writecurrentRegistration Done.
1.3.6.1.4.1.89.53.4.1.3.14.1.16ColumnrlPhdUnitGenParamRegistrationSuppressedread-writecurrentRegistration Suppressed.
1.3.6.1.4.1.89.53.4.1.3.14.1.17ColumnrlPhdUnitGenParamCpldVersionread-onlycurrentCPLD version
1.3.6.1.4.1.89.53.4.1.3.15TablerlPhdUnitEnvParamTablenot-accessiblecurrentFor each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.4.1.3.15.1RowrlPhdUnitEnvParamEntrynot-accessiblecurrentA entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.4.1.3.15.1.1ColumnrlPhdUnitEnvParamStackUnitread-onlycurrentThe index of the stack unit to which this conceptual row corresponds. Note that the index will be the same index as the index of a 'chassis' physical entity in…
1.3.6.1.4.1.89.53.4.1.3.15.1.2ColumnrlPhdUnitEnvParamMainPSStatusread-onlycurrentThe mandatory state of the main PS being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.3ColumnrlPhdUnitEnvParamRedundantPSStatusread-onlycurrentThe mandatory state of the redundant PS being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.4ColumnrlPhdUnitEnvParamFan1Statusread-onlycurrentThe mandatory state of the FAN 1 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.5ColumnrlPhdUnitEnvParamFan2Statusread-onlycurrentThe mandatory state of the FAN 2 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.6ColumnrlPhdUnitEnvParamFan3Statusread-onlycurrentThe mandatory state of the FAN 3 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.7ColumnrlPhdUnitEnvParamFan4Statusread-onlycurrentThe mandatory state of the FAN 4 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.8ColumnrlPhdUnitEnvParamFan5Statusread-onlycurrentThe mandatory state of the FAN 5 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.9ColumnrlPhdUnitEnvParamFan6Statusread-onlycurrentThe mandatory state of the FAN 6 being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.10ColumnrlPhdUnitEnvParamTempSensorValueread-onlycurrentCurrent value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.11ColumnrlPhdUnitEnvParamTempSensorStatusread-onlycurrentStatus value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.12ColumnrlPhdUnitEnvParamTempSensorWarningThresholdValueread-onlycurrentTemperature warning threshold value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.13ColumnrlPhdUnitEnvParamTempSensorCriticalThresholdValueread-onlycurrentTemperature critical threshold value for the Sensor being instrumented.
1.3.6.1.4.1.89.53.4.1.3.15.1.14ColumnrlPhdUnitEnvParamUpTimeread-onlycurrentUp time of the unit in 100th of second (sec/100).
1.3.6.1.4.1.89.53.4.1.3.15.1.15ColumnrlPhdUnitEnvParamMonitorAutoRecoveryEnableread-writecurrentDisable environment automatic recovery option
1.3.6.1.4.1.89.53.4.1.3.15.1.16ColumnrlPhdUnitEnvParamMonitorTemperatureStatusread-onlycurrentDisplay environment monitoring chassis temperature status
1.3.6.1.4.1.89.53.4.1.3.15.1.17ColumnrlPhdUnitEnvParamMonitorOperStatusread-onlycurrentDisplay environment automatic recovery current status (active/not active)
1.3.6.1.4.1.89.53.4.1.3.15.1.18ColumnrlPhdUnitEnvParamFan1Speedread-onlycurrentRotation speed of FAN 1 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.15.1.19ColumnrlPhdUnitEnvParamFan2Speedread-onlycurrentRotation speed of FAN 2 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.15.1.20ColumnrlPhdUnitEnvParamFan3Speedread-onlycurrentRotation speed of FAN 3 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.15.1.21ColumnrlPhdUnitEnvParamFan4Speedread-onlycurrentRotation speed of FAN 4 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.15.1.22ColumnrlPhdUnitEnvParamFan5Speedread-onlycurrentRotation speed of FAN 5 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.15.1.23ColumnrlPhdUnitEnvParamFan6Speedread-onlycurrentRotation speed of FAN 6 in RPM. Value 4294967295 means the measurement of speed is not supported.
1.3.6.1.4.1.89.53.4.1.3.16ScalarrlPhdStackOrderTopUnitread-writecurrentThis scalar mib holds the Top unit for the stack order command
1.3.6.1.4.1.89.53.4.1.3.17ScalarrlPhdStackOrderBottomUnitread-writecurrentThis scalar mib holds the Bottom unit for the stack order command
1.3.6.1.4.1.89.53.4.1.3.18ScalarrlPhdStackOrderPermutationread-writecurrentThis scalar mib holds stack permutation
1.3.6.1.4.1.89.53.4.1.3.19ScalarrlPhdNumberOfPoeUnitsread-onlycurrentShows the current number of poe units in the stack.
1.3.6.1.4.1.89.53.4.1.3.20TablerlPhdPoeTablenot-accessiblecurrentFor each module (board) there is an entry describing it in this module
1.3.6.1.4.1.89.53.4.1.3.20.1RowrlPhdPoeEntrynot-accessiblecurrentA entry of this table specifies a module (board)
1.3.6.1.4.1.89.53.4.1.3.20.1.1ColumnrlPhdPoeStackUnitread-onlycurrentThe stack unit to which this module belongs.
1.3.6.1.4.1.89.53.4.1.3.20.1.2ColumnrlPhdPoePresentread-onlycurrentThe present state of the PoE module. The no(1) state indicates that the PoE module is not present. The yes{2) state indicates that the PoE module is present.
1.3.6.1.4.1.89.53.4.1.3.21ScalarrlPhdPhyLedStackUnitread-writecurrentThis scalar mib holds the unit number for the stack light command
1.3.6.1.4.1.89.53.4.1.3.22ScalarrlPhdPhyLedTimeoutread-writecurrentThis scalar mib holds the timeout for the stack light command. May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0 - all units return to norm…
1.3.6.1.4.1.89.53.4.1.3.23TablerlCascadeTablenot-accessiblecurrentFor each cascaded port for stacking unit there is an entry describing it in this table
1.3.6.1.4.1.89.53.4.1.3.23.1RowrlCascadeEntrynot-accessiblecurrentAn entry of this table specifies a cascaded link information in a unit
1.3.6.1.4.1.89.53.4.1.3.23.1.1ColumnrlCascadeNeighborIfIndexread-onlycurrentThe ifIndex of a stacking port in the neighbor unit - 0 means not connected; other integer indicates the IfIndex.
1.3.6.1.4.1.89.53.4.1.3.23.1.2ColumnrlCascadeNeighborUnitread-onlycurrentThe unit number of the neighbor unit - 0 means not connected; other integer indicates the unit number.
1.3.6.1.4.1.89.53.4.1.3.23.1.3ColumnrlCascadeTrunkIdread-onlycurrentThe id of the trunk, the stacking port is member, zero if the port is not member of trunk.
1.3.6.1.4.1.89.53.4.1.3.23.1.4ColumnrlCascadeUnitIdread-onlycurrentThe unit number matching the current ifIndex
1.3.6.1.4.1.89.53.4.1.3.23.1.5ColumnrlCascadePortSpeedread-onlycurrentPort speed
1.3.6.1.4.1.89.53.4.1.3.23.1.6ColumnrlCascadePortStateread-onlycurrentPort state according to cascade LAG state machine
1.3.6.1.4.1.89.53.4.1.3.23.1.7ColumnrlCascadePortRowread-onlycurrentThe port row number
1.3.6.1.4.1.89.53.4.1.3.23.1.8ColumnrlCascadePortColumnread-onlycurrentThe port column number
1.3.6.1.4.1.89.53.4.1.3.23.1.9ColumnrlCascadePortMediaTyperead-onlycurrentThe media type of this port.
1.3.6.1.4.1.89.53.4.1.3.24TablerlCascadeAdminTablenot-accessiblecurrentFor each unit there is an entry describing its cascade ports and speed after reset
1.3.6.1.4.1.89.53.4.1.3.24.1RowrlCascadeAdminEntrynot-accessiblecurrentAn entry of this table specifies a cascaded information in a unit after reset
1.3.6.1.4.1.89.53.4.1.3.24.1.1ColumnrlCascadeAdminUnitIdnot-accessiblecurrentThe active unit number. Unit id 0 means configure all units.
1.3.6.1.4.1.89.53.4.1.3.24.1.2ColumnrlCascadeAdminIndexListread-writecurrentIndicates the stack ports indexes list. A set of indexes that are identified by a bit-map, in which each index is represented as a bit.
1.3.6.1.4.1.89.53.4.1.3.24.1.3ColumnrlCascadeAdminSpeedread-writecurrentCascade port speed
1.3.6.1.4.1.89.53.4.1.3.24.1.4ColumnrlCascadeSupportedPortListread-onlycurrentIndicates which ports can be configured as stack ports.
1.3.6.1.4.1.89.53.4.1.3.25TablerlPhdUnitStackPortTablenot-accessiblecurrentThe table listing information required for stack port. The index for the table is ifindex; the ports that represented in that table are operational stack ports…
1.3.6.1.4.1.89.53.4.1.3.25.1RowrlPhdUnitStackPortEntrynot-accessiblecurrentAn entry in rlPhdUnitStackPortTable
1.3.6.1.4.1.89.53.4.1.3.25.1.1ColumnrlPhdUnitStackPortNameread-onlycurrentStack port name
1.3.6.1.4.1.89.53.4.1.3.25.1.2ColumnrlPhdUnitStackPortTyperead-onlycurrentStack port type
1.3.6.1.4.1.89.53.4.1.3.25.1.3ColumnrlPhdUnitStackPortConnectionTyperead-onlycurrentOperational connection type (copper(1), combo-copper(2), combo-fiber(3), fiber(4), direct-Attached(5))
1.3.6.1.4.1.89.53.4.1.3.25.1.4ColumnrlPhdUnitStackPortRowread-onlycurrentOn which row (the uppermost being numbered 1 and the highest row number assigned to the lowest row) this actual/candidate cascade port resides within the chass…
1.3.6.1.4.1.89.53.4.1.3.25.1.5ColumnrlPhdUnitStackPortColumnread-onlycurrentOn which column (the leftmost being numbered 1 and the highest column number assigned to the rightmost column) this actual/candidate cascade port resides withi…
1.3.6.1.4.1.89.53.4.1.3.26TablerlPhdUnitIfsMappingTablenot-accessiblecurrentUnit Interface Mapping description table.
1.3.6.1.4.1.89.53.4.1.3.26.1RowrlPhdUnitIfsMappingEntrynot-accessiblecurrentUnit Interface Mapping description entry
1.3.6.1.4.1.89.53.4.1.3.26.1.1ColumnrlPhdUnitIfsMappingUnitIdnot-accessiblecurrentUnit Id
1.3.6.1.4.1.89.53.4.1.3.26.1.2ColumnrlPhdUnitIfsMappingUnitTyperead-writecurrentActual unit type used for interface mapping.
1.3.6.1.4.1.89.53.4.1.3.27ScalarrlPhdPhyLedTimeRemainingread-onlycurrentThis scalar mib holds the time remaining for the stack light command timout to expire. May be in the range 0..300 seconds, if the timeout = 0 - stack light com…
1.3.6.1.4.1.89.53.4.1.3.28ScalarrlPhdPhyLedPatternread-writecurrentThis scalar mib holds the pattern configuration required for the stack light command.
1.3.6.1.4.1.89.53.4.1.4ScalarrlPhdStackConnect2read-onlycurrentThe unit number connected to the Hyper GLink right side connection - 0 means not connected; other integer indicates the unit number.
1.3.6.1.4.1.89.53.4.1.5ScalarrlPhdStackSofrwareVerread-onlycurrentThe Software version of the unit.
1.3.6.1.4.1.89.53.4.1.6ScalarrlPhdStackProductIDread-onlycurrentThe Product ID of the unit.
1.3.6.1.4.1.89.53.4.1.7ScalarrlPhdStackMacAddrread-onlycurrentThe physical (MAC) address of the unit.
MIB Viewer