MIB Viewer

HPR-MIB

87 objects
This is the MIB module for objects used to manage network devices with HPR capabilities.
Imported Objects
APPN-MIBSnaControlPointName
SNA-NAU-MIBsnanauMIB
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.2.1.34.6IdentityhprMIBThis is the MIB module for objects used to manage network devices with HPR capabilities.
1.3.6.1.2.1.34.6.1NodehprObjects
1.3.6.1.2.1.34.6.1.1NodehprGlobal
1.3.6.1.2.1.34.6.1.1.1ScalarhprNodeCpNameread-onlycurrentAdministratively assigned network name for the APPN node where this HPR implementation resides. If this object has the same value as the appnNodeCpName object …
1.3.6.1.2.1.34.6.1.1.2ScalarhprOperatorPathSwitchSupportread-onlycurrentThis object indicates an implementation's level of support for an operator-requested path switch. notSupported(1) - the agent does not support operator-request…
1.3.6.1.2.1.34.6.1.2NodehprAnrRouting
1.3.6.1.2.1.34.6.1.2.1ScalarhprAnrsAssignedread-onlycurrentThe count of ANR labels assigned by this node since it was last re-initialized. A Management Station can detect discontinuities in this counter by monitoring t…
1.3.6.1.2.1.34.6.1.2.2ScalarhprAnrCounterStateread-writecurrentThis object is used for a network management station to turn on/off the counting of ANR packets in the hprAnrRoutingTable. The initial value of this object is …
1.3.6.1.2.1.34.6.1.2.3ScalarhprAnrCounterStateTimeread-onlycurrentThe time when the hprAnrCounterState object last changed its value. The initial value returned by this object is the time at which the APPN node instrumented w…
1.3.6.1.2.1.34.6.1.2.4TablehprAnrRoutingTablenot-accessiblecurrentThe ANR Routing table provides a means of correlating an incoming ANR label (i.e., one assigned by this node) with the TG over which a packet containing the la…
1.3.6.1.2.1.34.6.1.2.4.1RowhprAnrRoutingEntrynot-accessiblecurrentThe ANR label is used to index this table.
1.3.6.1.2.1.34.6.1.2.4.1.1ColumnhprAnrLabelnot-accessiblecurrentThe first ANR label in an incoming packet.
1.3.6.1.2.1.34.6.1.2.4.1.2ColumnhprAnrTyperead-onlycurrentAn object indicating whether an ANR label assigned by this node identifies a local NCE or a TG on which outgoing packets are forwarded. nce(1) - the ANR label …
1.3.6.1.2.1.34.6.1.2.4.1.3ColumnhprAnrOutTgDestread-onlycurrentDestination node for the TG over which packets with this ANR label are forwarded. This is the fully qualified name of an APPN network node or end node, formatt…
1.3.6.1.2.1.34.6.1.2.4.1.4ColumnhprAnrOutTgNumread-onlycurrentNumber of the TG over which packets with this ANR label are forwarded. If the ANR label identifies a local NCE, then this object returns the value 0, since 0 i…
1.3.6.1.2.1.34.6.1.2.4.1.5ColumnhprAnrPacketsReceivedread-onlycurrentThe count of packets received with this ANR label as their first label. A Management Station can detect discontinuities in this counter by monitoring the hprAn…
1.3.6.1.2.1.34.6.1.2.4.1.6ColumnhprAnrCounterDisconTimeread-onlycurrentThe value of the sysUpTime object when the hprAnrPacketsReceived counter for this ANR label last experienced a discontinuity. This will be the more recent of t…
1.3.6.1.2.1.34.6.1.3NodehprTransportUser
1.3.6.1.2.1.34.6.1.3.1TablehprNceTablenot-accessiblecurrentThe Network Connection Endpoint (NCE) table.
1.3.6.1.2.1.34.6.1.3.1.1RowhprNceEntrynot-accessiblecurrentThe NCE ID is used to index this table.
1.3.6.1.2.1.34.6.1.3.1.1.1ColumnhprNceIdnot-accessiblecurrentThe Network Connection Endpoint (NCE) ID. NCEs identify Control Points (Cp), Logical Units (Lu), HPR Boundary Functions (Bf) and Route Setup (Rs) Functions. A …
1.3.6.1.2.1.34.6.1.3.1.1.2ColumnhprNceTyperead-onlycurrentA bit string identifying the function types provided by this Network Connection Endpoint (NCE).
1.3.6.1.2.1.34.6.1.3.1.1.3ColumnhprNceDefaultread-onlycurrentA bit string identifying the function types for which this Network Connection Endpoint (NCE) is the default NCE. While default NCEs are not explicitly defined …
1.3.6.1.2.1.34.6.1.3.1.1.4ColumnhprNceInstanceIdread-onlycurrentThe NCE instance identifier (NCEII) identifying the current instance of this NCE. An NCEII is used to denote different instances (IPLs) of an NCE component. Ea…
1.3.6.1.2.1.34.6.1.4NodehprRtp
1.3.6.1.2.1.34.6.1.4.1NodehprRtpGlobe
1.3.6.1.2.1.34.6.1.4.1.1ScalarhprRtpGlobeConnSetupsread-onlycurrentThe count of RTP connection setups in which this node has participated, as either sender or receiver, since it was last re-initialized. Retries of a setup atte…
1.3.6.1.2.1.34.6.1.4.1.2ScalarhprRtpGlobeCtrStateread-writecurrentThis object allows a network management station to turn the counters in the hprRtpTable on and off. The initial value of this object is an implementation choic…
1.3.6.1.2.1.34.6.1.4.1.3ScalarhprRtpGlobeCtrStateTimeread-onlycurrentThe time when the value of the hprRtpGlobeCtrState object last changed. The initial value returned by this object is the time at which the APPN node instrument…
1.3.6.1.2.1.34.6.1.4.2TablehprRtpTablenot-accessiblecurrentThe RTP Connection table
1.3.6.1.2.1.34.6.1.4.2.1RowhprRtpEntrynot-accessiblecurrentThe local NCE ID and local TCID are used to index this table.
1.3.6.1.2.1.34.6.1.4.2.1.1ColumnhprRtpLocNceIdnot-accessiblecurrentThe local Network Connection Endpoint (NCE) ID of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components. A val…
1.3.6.1.2.1.34.6.1.4.2.1.2ColumnhprRtpLocTcidnot-accessiblecurrentThe local TCID of this RTP connection. A value for this object can be retrieved from either the appnIsInRtpTcid object or the appnIsRtpTcid object the APPN MIB…
1.3.6.1.2.1.34.6.1.4.2.1.3ColumnhprRtpRemCpNameread-onlycurrentAdministratively assigned network name for the remote node of this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.4ColumnhprRtpRemNceIdread-onlycurrentThe remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
1.3.6.1.2.1.34.6.1.4.2.1.5ColumnhprRtpRemTcidread-onlycurrentThe remote TCID of this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.6ColumnhprRtpPathSwitchTriggerread-writecurrentObject by which a Management Station can trigger an operator- requested path switch, by setting the value to switchPathNow(2). Setting this object to switchPat…
1.3.6.1.2.1.34.6.1.4.2.1.7ColumnhprRtpRscvread-onlycurrentThe forward Route Selection Control Vector for this RTP connection. The format of this vector is described in SNA Formats. The value returned in this object du…
1.3.6.1.2.1.34.6.1.4.2.1.8ColumnhprRtpTopicread-onlycurrentThe topic for this RTP connection. This is used to indicate the Class of Service.
1.3.6.1.2.1.34.6.1.4.2.1.9ColumnhprRtpStateread-onlycurrentThe state of the RTP connection, from the perspective of the local RTP protocol machine: rtpListening - connection open; waiting for other end to call in rtpCa…
1.3.6.1.2.1.34.6.1.4.2.1.10ColumnhprRtpUpTimeread-onlycurrentThe length of time the RTP connection has been up, measured in 1/100ths of a second.
1.3.6.1.2.1.34.6.1.4.2.1.11ColumnhprRtpLivenessTimerread-onlycurrentThe value of the liveness (ALIVE) timer of this RTP connection, in units of 1/100th of a second. When this timer expires and no packet has arrived from the par…
1.3.6.1.2.1.34.6.1.4.2.1.12ColumnhprRtpShortReqTimerread-onlycurrentThe value of the RTP SHORT_REQ timer, in units of 1/100 of a second. This timer represents the maximum time that a sender waits for a reply from a receiver.
1.3.6.1.2.1.34.6.1.4.2.1.13ColumnhprRtpPathSwTimerread-onlycurrentThe length of time that RTP should attempt a path switch for a connection, in units of 1/100th of a second.
1.3.6.1.2.1.34.6.1.4.2.1.14ColumnhprRtpLivenessTimeoutsread-onlycurrentThe count of liveness timeouts for this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.15ColumnhprRtpShortReqTimeoutsread-onlycurrentThe count of short request timeouts for this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.16ColumnhprRtpMaxSendRateread-onlycurrentThe high-water mark for this RTP connection's send rate, in units of bytes per second. This is the high-water mark for the entire life of the connection, not j…
1.3.6.1.2.1.34.6.1.4.2.1.17ColumnhprRtpMinSendRateread-onlycurrentThe low-water mark for this RTP connection's send rate, in units of bytes per second. This is the low-water mark for the entire life of the connection, not jus…
1.3.6.1.2.1.34.6.1.4.2.1.18ColumnhprRtpCurSendRateread-onlycurrentThe current send rate for this RTP connection, in units of bytes per second. For more details on this and other parameters related to HPR, see the High Perform…
1.3.6.1.2.1.34.6.1.4.2.1.19ColumnhprRtpSmRdTripDelayread-onlycurrentThe smoothed round trip delay for this RTP connection, in units of 1/1000th of a second (ms). For more details on this and other parameters related to HPR, see…
1.3.6.1.2.1.34.6.1.4.2.1.20ColumnhprRtpSendPacketsread-onlycurrentThe count of packets successfully sent on this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.21ColumnhprRtpRecvPacketsread-onlycurrentThe count of packets received on this RTP connection. The counter is incremented only once if duplicate copies of a packet are received.
1.3.6.1.2.1.34.6.1.4.2.1.22ColumnhprRtpSendBytesread-onlycurrentThe count of bytes sent on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.
1.3.6.1.2.1.34.6.1.4.2.1.23ColumnhprRtpRecvBytesread-onlycurrentThe count of bytes received on this RTP connection. Both RTP Transport Header (THDR) bytes and data bytes are included in this count.
1.3.6.1.2.1.34.6.1.4.2.1.24ColumnhprRtpRetrPacketsread-onlycurrentThe count of packets retransmitted on this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.25ColumnhprRtpPacketsDiscardedread-onlycurrentThe count of packets received on this RTP connection and then discarded. A packet may be discarded because it is determined to be a duplicate, or for other rea…
1.3.6.1.2.1.34.6.1.4.2.1.26ColumnhprRtpDetectGapsread-onlycurrentThe count of gaps detected on this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.27ColumnhprRtpRateReqSendsread-onlycurrentThe count of Rate Requests sent on this RTP connection.
1.3.6.1.2.1.34.6.1.4.2.1.28ColumnhprRtpOkErrPathSwsread-onlycurrentThe count of successful path switch attempts for this RTP connection due to errors.
1.3.6.1.2.1.34.6.1.4.2.1.29ColumnhprRtpBadErrPathSwsread-onlycurrentThe count of unsuccessful path switches for this RTP connection due to errors.
1.3.6.1.2.1.34.6.1.4.2.1.30ColumnhprRtpOkOpPathSwsread-onlycurrentThe count of successful path switches for this RTP connection due to operator requests.
1.3.6.1.2.1.34.6.1.4.2.1.31ColumnhprRtpBadOpPathSwsread-onlycurrentThe count of unsuccessful path switches for this RTP connection due to operator requests. This counter is not incremented by an implementation that does not su…
1.3.6.1.2.1.34.6.1.4.2.1.32ColumnhprRtpCounterDisconTimeread-onlycurrentThe value of the sysUpTime object when the counters for this RTP connection last experienced a discontinuity. This will be the more recent of two times: the ti…
1.3.6.1.2.1.34.6.1.4.3TablehprRtpStatusTablenot-accessiblecurrentRTP Connection Status Table: This table contains historical information on RTP connections. An entry is created in this table when a path switch is completed, …
1.3.6.1.2.1.34.6.1.4.3.1RowhprRtpStatusEntrynot-accessiblecurrentThis table is indexed by local NCE ID, local TCID, and an integer hprRtpStatusIndex. Thus the primary grouping of table rows is by RTP connection, with the mul…
1.3.6.1.2.1.34.6.1.4.3.1.1ColumnhprRtpStatusLocNceIdnot-accessiblecurrentThe local Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
1.3.6.1.2.1.34.6.1.4.3.1.2ColumnhprRtpStatusLocTcidnot-accessiblecurrentThe local TCID of this RTP connection.
1.3.6.1.2.1.34.6.1.4.3.1.3ColumnhprRtpStatusIndexnot-accessiblecurrentTable index. This value begins at one and is incremented when a new entry is added to the table. It is an implementation choice whether to run a single counter…
1.3.6.1.2.1.34.6.1.4.3.1.4ColumnhprRtpStatusStartTimeread-onlycurrentThe time when the path switch began.
1.3.6.1.2.1.34.6.1.4.3.1.5ColumnhprRtpStatusEndTimeread-onlycurrentThe time when the path switch was ended, either successfully or unsuccessfully.
1.3.6.1.2.1.34.6.1.4.3.1.6ColumnhprRtpStatusRemCpNameread-onlycurrentAdministratively assigned network name for the remote node of this RTP connection.
1.3.6.1.2.1.34.6.1.4.3.1.7ColumnhprRtpStatusRemNceIdread-onlycurrentThe remote Network Connection Endpoint (NCE) of this RTP connection. NCEs identify CPs, LUs, Boundary Functions (BFs), and Route Setup (RS) components.
1.3.6.1.2.1.34.6.1.4.3.1.8ColumnhprRtpStatusRemTcidread-onlycurrentThe remote TCID of this RTP connection.
1.3.6.1.2.1.34.6.1.4.3.1.9ColumnhprRtpStatusNewRscvread-onlycurrentThe new Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation d…
1.3.6.1.2.1.34.6.1.4.3.1.10ColumnhprRtpStatusOldRscvread-onlycurrentThe old Route Selection Control Vector for this RTP connection. A zero-length string indicates that no value is available, perhaps because the implementation d…
1.3.6.1.2.1.34.6.1.4.3.1.11ColumnhprRtpStatusCauseread-onlycurrentThe reason for the path switch: other(1) - Reason other than those listed below, rtpConnFail(2) - RTP connection failure detected, locLinkFail(3) - Local link …
1.3.6.1.2.1.34.6.1.4.3.1.12ColumnhprRtpStatusLastAttemptResultread-onlycurrentThe result of the last completed path switch attempt. If the path switch is aborted in the middle of a path switch attempt because the path switch timer expire…
1.3.6.1.2.1.34.6.2NodehprConformance
1.3.6.1.2.1.34.6.2.1NodehprCompliances
1.3.6.1.2.1.34.6.2.1.1CompliancehprCompliancecurrentThe compliance statement for the SNMPv2 entities that implement the HPR MIB.
1.3.6.1.2.1.34.6.2.2NodehprGroups
1.3.6.1.2.1.34.6.2.2.1GrouphprGlobalConfGroupcurrentA collection of objects providing the instrumentation of HPR general information and capabilities.
1.3.6.1.2.1.34.6.2.2.2GrouphprAnrRoutingConfGroupcurrentA collection of objects providing instrumentation for the node's ANR routing.
1.3.6.1.2.1.34.6.2.2.3GrouphprTransportUserConfGroupcurrentA collection of objects providing information on the users of the HPR transport known to the node.
1.3.6.1.2.1.34.6.2.2.4GrouphprRtpConfGroupcurrentA collection of objects providing the instrumentation for RTP connection end points.
Type Definitions
NameSyntaxStatusDescription
HprNceTypesBITS { controlPoint(0), logicalUnit(1), boundaryFunction(2), routeSetup(3) }currentA bit string identifying the set of functions provided by a network connection endpoint (NCE). The following values are defined: bit 0: control point bit 1: logical unit bit 2: boundary function bit 3: route setup
HprRtpCounterCounter32currentAn object providing statistics for an RTP connection. A Management Station can detect discontinuities in this counter by monitoring the correspondingly indexed hprRtpCounterDisconTime object.
MIB Viewer