HT-80211-MGMT-MIB
227 objects
Hitron 802.11 management MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595.80211 | IdentityhitronWifiMgmt | Hitron 802.11 management MIB | ||
| 1.3.6.1.4.1.8595.80211.1 | NodewifiMgmtBase | |||
| 1.3.6.1.4.1.8595.80211.1.1 | ScalarwifiOperMode | read-write | current | Used to control the 802.11 operational mode. If set to notAvailable(0), then the wireless interface will be disabled, with the radio off, and no wireless setti… |
| 1.3.6.1.4.1.8595.80211.1.4 | ScalarwifiCurrentChannel | read-write | current | Controls and reflects the current channel number. The setting value of wifiCurrentChannel should match with hitronWifiChannelList. |
| 1.3.6.1.4.1.8595.80211.1.5 | ScalarwifiBeaconInterval | read-write | current | Controls and reflects the beacon interval for the device. |
| 1.3.6.1.4.1.8595.80211.1.6 | ScalarwifiDTIMInterval | read-write | current | Controls and reflects the DTIM interval for the device. |
| 1.3.6.1.4.1.8595.80211.1.7 | ScalarwifiFragThresh | read-write | current | Controls and reflects the fragmentation threshold for the device. |
| 1.3.6.1.4.1.8595.80211.1.8 | ScalarwifiRTSThresh | read-write | current | Controls and reflects the RTS threshold for the device. |
| 1.3.6.1.4.1.8595.80211.1.9 | ScalarwifiSRL | read-write | current | Controls and reflects the short retry limit for the device. |
| 1.3.6.1.4.1.8595.80211.1.10 | ScalarwifiLRL | read-write | current | Controls and reflects the long retry limit for the device. |
| 1.3.6.1.4.1.8595.80211.1.11 | Scalarwifi11nNetMode | read-write | current | Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used. Auto means 802.11bgn (mixed) |
| 1.3.6.1.4.1.8595.80211.1.12 | Scalarwifi54gProtectionEnable | read-write | current | Controls and reflects the state of 54g protection. If set to on(1), the AP will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. S… |
| 1.3.6.1.4.1.8595.80211.1.13 | ScalarwifiRate | read-write | current | Forces the transmission rate for the AP to a particular speed MCS (Modulation Coding Schemes) data rates above are given with BW=20MHz and Long Guard Interval … |
| 1.3.6.1.4.1.8595.80211.1.14 | ScalarwifiOutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. |
| 1.3.6.1.4.1.8595.80211.1.15 | ScalarhitronWifiMbssUserControl | read-write | current | |
| 1.3.6.1.4.1.8595.80211.1.16 | ScalarhitronWifiResetDefaults | read-write | current | Reset all Wifi parameters back to factory default. This only affects the Wifi parameters, no other value is reset. As long as the security settings have not ch… |
| 1.3.6.1.4.1.8595.80211.1.17 | ScalarwifiChannelBandwidth | read-write | current | Selects 20MHz or 40MHz channel bandwidth operation. 40MHz (channel bonding) allows to get high throughput. By default, the mode is 20M/40M co-exist. When it is… |
| 1.3.6.1.4.1.8595.80211.1.18 | ScalarwifiExtensionChannelforCh6 | read-write | current | For channel bonding (40MHz), there is a possibility to choose ExtCh-1 (below)or ExtCh+1 (above) when current channel is 6. If current channel is 1~5, only ExtC… |
| 1.3.6.1.4.1.8595.80211.1.19 | ScalarhitronWifiChannelList | read-write | current | This OID describe the channels supported by the wifi AP. For North Amrica, the channel list is from 1 to 11. For Japan, The channel list is from 1 to 14, but c… |
| 1.3.6.1.4.1.8595.80211.1.20 | ScalarhitronWifiRadiusReAuthInterval | read-write | current | The network re-authentication interval. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.8595.80211.1.21 | ScalarwifiCountryCode | read-write | current | This OID control the wifi country code. ie: US for USA. http://userpage.chemie.fu-berlin.de/diverse/doc/ISO_3166.html |
| 1.3.6.1.4.1.8595.80211.1.22 | ScalarwifiWMMResetDefault | read-write | current | This OID control the reset to default for WMM parameters. WMM parameters would affect the generic wifi performance in case the wrong values are set through GUI… |
| 1.3.6.1.4.1.8595.80211.1.23 | ScalarwifiWPS4OnOff | read-write | current | This OID control the control of wifi on/off through WPS button. If it's false, the WPS button would not be used to control the wifi on/off. If it's true, the W… |
| 1.3.6.1.4.1.8595.80211.1.24 | ScalarwifiWPS4OnOffTimeSet | read-write | current | This OID control the pressing time range defined to trigger the wifi on/off through WPS button. |
| 1.3.6.1.4.1.8595.80211.1.25 | ScalarwifiGuestScheduleEnable | read-write | current | Enable or disable the schedule settings for ssids. |
| 1.3.6.1.4.1.8595.80211.1.26 | ScalarwifiRunAcsInterval | read-write | current | Used to control the interval to run wifi acs. Choose interval-15min to run wifi acs every 15 minutes. interval-30min/interval-60min mean 30 minutes or 60 minut… |
| 1.3.6.1.4.1.8595.80211.1.27 | ScalarhitronWifiChannelACSSkipLo | read-write | current | This OID describe the low channels which will be skipped by ACS. This should be used together and matched with hitronWifiChannelList and hitronWifiChannelACSSk… |
| 1.3.6.1.4.1.8595.80211.1.28 | ScalarhitronWifiChannelACSSkipHi | read-write | current | This OID describe the high channels which will be skipped by ACS. This should be used together and matched with hitronWifiChannelList and hitronWifiChannelACSS… |
| 1.3.6.1.4.1.8595.80211.1.29 | ScalarhitronWifiRadiusSelectedInterface | read-write | current | This object controls which interface is used for the RADIUS security. The default value depends on the MSO's requirement. |
| 1.3.6.1.4.1.8595.80211.5 | NodehitronWifiMgmtMbss | |||
| 1.3.6.1.4.1.8595.80211.5.1 | NodehitronWifiMbssBase | |||
| 1.3.6.1.4.1.8595.80211.5.1.14 | TablehitronWifiBssTable | not-accessible | current | A table of entries in an MBSS system. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1 | RowhitronWifiBssEntry | not-accessible | current | An entry describing the characteristics of an individual BSS. An entry exists in this table for each entry of type ieee80211 (71) in the ifTable. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.1 | ColumnhitronWifiBssId | read-only | current | The physical address associated with this service set. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.2 | ColumnhitronWifiBssEnable | read-write | current | Enables or disables this service set. All other SSID, except for the primary SSID, are disabled. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.3 | ColumnhitronWifiBssSsid | read-write | current | Controls and reflects the service set identifier for this BSS. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.5 | ColumnhitronWifiBssSecurityMode | read-write | current | Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise , RADIUS-WEP or WPA_Auto. In WPA_Auto the unit will auto-dete… |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.6 | ColumnhitronWifiBssClosedNetwork | read-write | current | Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beaco… |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.7 | ColumnhitronWifiBssAccessMode | read-write | current | Controls what stations will be given access to the device. If set to allowAny(1), then any station will be allowed to connect. If set to allowList(2), then onl… |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.8 | ColumnhitronWifiBssWMMEnable | read-write | current | WMM adds prioritized capabilities (voice, video, best effort, background) to Wi-Fi networks and optimizes their performances when multiple concurring applicati… |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.9 | ColumnhitronWifiBssAccessOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current Access setting in the device. IF false, … |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.10 | ColumnhitronWifiBssMgmtWebAccessEnable | read-write | current | this mib contol the cpe which connect behind the wifi can access webpage. |
| 1.3.6.1.4.1.8595.80211.5.1.14.1.11 | ColumnhitronWifiBssMaxCPE | read-write | current | Controls the max cpe stations which will be given access to the device. The total max CPE allowed for all SSIDs enabled is 253 Operators should manage the CPE … |
| 1.3.6.1.4.1.8595.80211.5.2 | NodehitronWifiMbssSecurity | |||
| 1.3.6.1.4.1.8595.80211.5.2.1 | TablehitronWifiBssWepTable | not-accessible | current | A table used to configure settings related to the WEP security modes. |
| 1.3.6.1.4.1.8595.80211.5.2.1.1 | RowhitronWifiBssWepEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the hitronWifiBssTable for which hitronWifiB… |
| 1.3.6.1.4.1.8595.80211.5.2.1.1.1 | ColumnhitronWifiBssWepDefaultKey | read-write | current | Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the hitronWifiBssWep64BitKeyTable i… |
| 1.3.6.1.4.1.8595.80211.5.2.1.1.2 | ColumnhitronWifiBssWepEncryptionMode | read-write | current | Selects the WEP encryption method used by this service set. If set to wep64(1), then 64 bit WEP encryption will be used with the keys from the hitronWifiBssWep… |
| 1.3.6.1.4.1.8595.80211.5.2.1.1.3 | ColumnhitronWifiBssWepAuthenticationMode | read-write | current | Selects the WEP authentication method used by this service set. |
| 1.3.6.1.4.1.8595.80211.5.2.2 | TablehitronWifiBssWep64BitKeyTable | not-accessible | current | A table of 40 bit key values used when operating in WEP 64 mode. |
| 1.3.6.1.4.1.8595.80211.5.2.2.1 | RowhitronWifiBssWep64BitKeyEntry | not-accessible | current | A key to be used by the row in the hitronWifiBssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.2.2.1.1 | ColumnhitronWifiBssWep64BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.2.2.1.2 | ColumnhitronWifiBssWep64BitKeyValue | read-write | current | A 40 bit key to be used when the corresponding instance of hitronWifiBssSecurityMode is set to wep(1) and the corresponding instance of hitronWifiBssWepEncrypt… |
| 1.3.6.1.4.1.8595.80211.5.2.3 | TablehitronWifiBssWep128BitKeyTable | not-accessible | current | A table of 104 bit key values used when operating in WEP 128 mode. |
| 1.3.6.1.4.1.8595.80211.5.2.3.1 | RowhitronWifiBssWep128BitKeyEntry | not-accessible | current | A key to be used by the row in the hitronWifiBssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.2.3.1.1 | ColumnhitronWifiBssWep128BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.2.3.1.2 | ColumnhitronWifiBssWep128BitKeyValue | read-write | current | A 104 bit key to be used when the corresponding instance of hitronWifiBssSecurityMode is set to wep(1) and the corresponding instance of hitronWifiBssWepEncryp… |
| 1.3.6.1.4.1.8595.80211.5.2.4 | TablehitronWifiBssWpaTable | not-accessible | current | A table used to configure settings related to the WPA security modes. |
| 1.3.6.1.4.1.8595.80211.5.2.4.1 | RowhitronWifiBssWpaEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the hitronWifiBssTable for which hitronWifiB… |
| 1.3.6.1.4.1.8595.80211.5.2.4.1.1 | ColumnhitronWifiBssWpaAlgorithm | read-write | current | Controls and reflects the WPA encryption mode used by the service set. The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either tkip(1) or aes(… |
| 1.3.6.1.4.1.8595.80211.5.2.4.1.2 | ColumnhitronWifiBssWpaPreSharedKey | read-write | current | Sets the WPA Pre-Shared Key (PSK) used by this service set. This value MUST be either a 64 byte hexadecimal number, OR an 8 to 63 character ASCII string. All o… |
| 1.3.6.1.4.1.8595.80211.5.2.4.1.3 | ColumnhitronWifiBssWpaGroupRekeyInterval | read-write | current | Sets the WPA Group Rekey Interval for this service set. If set to zero, periodic rekeying is disabled for this service set. |
| 1.3.6.1.4.1.8595.80211.5.2.5 | TablehitronWifiBssRadiusTable | not-accessible | current | A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP. |
| 1.3.6.1.4.1.8595.80211.5.2.5.1 | RowhitronWifiBssRadiusEntry | not-accessible | current | An entry defining the RADIUS characteristics of an individual service set. A row exists in this table for each row in the hitronWifiBssTable for which hitronWi… |
| 1.3.6.1.4.1.8595.80211.5.2.5.1.1 | ColumnhitronWifiBssRadiusAddressType | read-write | current | The type of internet address used for hitronWifiBssRadiusAddress. |
| 1.3.6.1.4.1.8595.80211.5.2.5.1.2 | ColumnhitronWifiBssRadiusAddress | read-write | current | The internet address of the RADIUS server for this service set. |
| 1.3.6.1.4.1.8595.80211.5.2.5.1.3 | ColumnhitronWifiBssRadiusPort | read-write | current | The UDP port used to communicate with the RADIUS server for this service set. |
| 1.3.6.1.4.1.8595.80211.5.2.5.1.4 | ColumnhitronWifiBssRadiusKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.8595.80211.5.3 | NodehitronWifiMbssAccess | |||
| 1.3.6.1.4.1.8595.80211.5.3.1 | TablehitronWifiBssAccessTable | not-accessible | current | A table of MAC addresses which defines the MAC address based access restrictions for the system. |
| 1.3.6.1.4.1.8595.80211.5.3.1.1 | RowhitronWifiBssAccessEntry | not-accessible | current | A row in the table which specifies a single MAC address for a given service set. |
| 1.3.6.1.4.1.8595.80211.5.3.1.1.1 | ColumnhitronWifiBssAccessIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.8595.80211.5.3.1.1.2 | ColumnhitronWifiBssAccessStation | read-write | current | A MAC address of a station which will be allowed to connect to the service set if hitronWifiBssAccessMode is set to restrictToList(2), or forbidden if hitronWi… |
| 1.3.6.1.4.1.8595.80211.5.4 | NodehitronWifiMbssIpRoute | |||
| 1.3.6.1.4.1.8595.80211.5.4.1 | TablehitronWifiMbssIpRouteTable | not-accessible | current | Table containing information for the Network definition. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1 | RowhitronWifiMbssIpRouteEntry | not-accessible | current | Entry containing all the information about the Network definition. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.1 | ColumnhitronWifiMbssIpRouteEnabled | read-write | current | It controls the independency of the subnet for the specified SSID. If its value is true, this SSID would have its own subnet which is independent from the othe… |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.2 | ColumnhitronWifiMbssIpRouteMode | read-write | current | The specifies the Type of network that is being defined. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.3 | ColumnhitronWifiMbssIpRouteIpType | read-write | current | Ip Address Type of the VLAN IP for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.4 | ColumnhitronWifiMbssIpRouteIp | read-write | current | Ip Address of the VLAN IP for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.5 | ColumnhitronWifiMbssIpRouteSubnetMaskType | read-write | current | Ip Address Type of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.6 | ColumnhitronWifiMbssIpRouteSubnetMask | read-write | current | Ip Address of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.7 | ColumnhitronWifiMbssIpRoutePriDnsServerIpType | read-write | current | Ip Address Type of the Primary DNS for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.8 | ColumnhitronWifiMbssIpRoutePriDnsServerIp | read-write | current | Ip Address of the Primary DNS for a specific Network. When the hitronWifiMbssIpRouteEnabled is false,it will use the hitronGwMgmtLanDnsServerIp in HITRON-GW-MG… |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.9 | ColumnhitronWifiMbssIpRouteSecDnsServerIpType | read-write | current | Ip Address Type of the Second DNS for a specific Network. |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.10 | ColumnhitronWifiMbssIpRouteSecDnsServerIp | read-write | current | Ip Address of the Second DNS for a specific Network. When the hitronWifiMbssIpRouteEnabled is false,it will use the hitronGwMgmtLanDnsServerIp in HITRON-GW-MGM… |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.11 | ColumnhitronWifiMbssIpRouteTypeOfService | read-write | current | Byte value to be used for the override TOS field for all IP packets on this BSS. A value of 0 means dont override, where any other value will be used to overri… |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.12 | ColumnhitronWifiMbssIpRouteFirewallEnable | read-write | current | . |
| 1.3.6.1.4.1.8595.80211.5.4.1.1.13 | ColumnhitronWifiMbssIpRouteTcpMssClampSize | read-write | current | This objects controls the tcp mss clamping size for multiple SSIDs. If the value is set to 0, tcp mss clamping feature is disabled. |
| 1.3.6.1.4.1.8595.80211.5.5 | NodehitronWifiMbssDhcp | |||
| 1.3.6.1.4.1.8595.80211.5.5.1 | TablehitronWifiBssDhcpTable | not-accessible | current | A table of DHCP servers which define DHCP related information for the system. |
| 1.3.6.1.4.1.8595.80211.5.5.1.1 | RowhitronWifiBssDhcpEntry | not-accessible | current | A row in the table which defines the DHCP service for a given SSID ifindex. |
| 1.3.6.1.4.1.8595.80211.5.5.1.1.1 | ColumnhitronWifiBssDhcpEnable | read-write | current | true(1): DHCP server enabled false(2): DHCP server disabled |
| 1.3.6.1.4.1.8595.80211.5.5.1.1.2 | ColumnhitronWifiBssDhcpServerType | read-write | current | DHCP Server type |
| 1.3.6.1.4.1.8595.80211.5.5.1.1.3 | ColumnhitronWifiBssDhcpLeasePoolStart | read-write | current | DHCP Server Lease Pool Start ( default is 192.168.x.10 ) |
| 1.3.6.1.4.1.8595.80211.5.5.1.1.4 | ColumnhitronWifiBssDhcpLeasePoolEnd | read-write | current | DHCP Server Lease Pool End ( default is 192.168.x.199 ) |
| 1.3.6.1.4.1.8595.80211.5.5.1.1.5 | ColumnhitronWifiBssDhcpLeaseTime | read-write | current | DHCP Lease Time ( default is 86400 sec ) |
| 1.3.6.1.4.1.8595.80211.5.6 | NodehitronWifiMbssParentalCtrl | |||
| 1.3.6.1.4.1.8595.80211.5.6.1 | NodehitronWifiBssParentalCtrlEnable | |||
| 1.3.6.1.4.1.8595.80211.5.6.1.1 | TablehitronWifiBssParentalCtrlEnableTable | not-accessible | current | A table which defined the on/off of parental control for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.1.1.1 | RowhitronWifiBssParentalCtrlEnableEntry | not-accessible | current | A row in the table defines on/off for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.1.1.1.1 | ColumnhitronWifiBssParentalCtrlEnableVal | read-write | current | true(1): Parental Control enabled false(2): Parental Control disabled |
| 1.3.6.1.4.1.8595.80211.5.6.1.1.1.2 | ColumnhitronWifiBssParentalCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.80211.5.6.2 | NodehitronWifiBssParentalCtrlBlocked | |||
| 1.3.6.1.4.1.8595.80211.5.6.2.1 | TablehitronWifiBssParentalCtrlBlockedTable | not-accessible | current | A table which defined the Key words or URL for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.2.1.1 | RowhitronWifiBssParentalCtrlBlockedEntry | not-accessible | current | A row in the table defines the ker word or URL for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.2.1.1.1 | ColumnhitronWifiBssParentalCtrlBlockedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.6.2.1.1.2 | ColumnhitronWifiBssParentalCtrlBlockedVal | read-write | current | The key words or URL used to screen and block the content. If it is set to zero string ,it means delete this key word from the List. |
| 1.3.6.1.4.1.8595.80211.5.6.3 | NodehitronWifiBssParentalCtrlTrusted | |||
| 1.3.6.1.4.1.8595.80211.5.6.3.1 | TablehitronWifiBssParentalCtrlTrustedTable | not-accessible | current | A table which defined the trusted MAC addresses for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.3.1.1 | RowhitronWifiBssParentalCtrlTrustedEntry | not-accessible | current | A row in the table defines the trusted MAC addresses for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.3.1.1.1 | ColumnhitronWifiBssParentalCtrlTrustedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.6.3.1.1.2 | ColumnhitronWifiBssParentalCtrlTrustedVal | read-write | current | The MAC address which is trusted and without parental control. If it is set to 0x000000000000 from an effective MAC address,it means delete this MAC address fr… |
| 1.3.6.1.4.1.8595.80211.5.6.4 | NodehitronWifiBssParentalCtrlSchedule | |||
| 1.3.6.1.4.1.8595.80211.5.6.4.1 | TablehitronWifiBssParentalCtrlScheduleTable | not-accessible | current | A table which defined the schedule for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1 | RowhitronWifiBssParentalCtrlScheduleEntry | not-accessible | current | A row in the table defines the Schedule for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1.1 | ColumnhitronWifiBssParentalCtrlWeek | read-write | current | Each bit of the byte represent each day of the week. From bit 0 to 6 ,they represent Monday to Sunday. |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1.2 | ColumnhitronWifiBssParentalCtrlHourStart | read-write | current | Start hour of the parental control |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1.3 | ColumnhitronWifiBssParentalCtrlHourEnd | read-write | current | End hour of the parental control |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1.4 | ColumnhitronWifiBssParentalCtrlMinStart | read-write | current | Start minute of the parental control |
| 1.3.6.1.4.1.8595.80211.5.6.4.1.1.5 | ColumnhitronWifiBssParentalCtrlMinEnd | read-write | current | End minute of the parental control |
| 1.3.6.1.4.1.8595.80211.5.7 | NodehitronWifiMbssIPFilterCtrl | |||
| 1.3.6.1.4.1.8595.80211.5.7.1 | NodehitronWifiBssIPFilterCtrlEnable | |||
| 1.3.6.1.4.1.8595.80211.5.7.1.1 | TablehitronWifiBssIPFilterCtrlEnableTable | not-accessible | current | A table which defined the on/off of IP filter function for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.7.1.1.1 | RowhitronWifiBssIPFilterCtrlEnableEntry | not-accessible | current | A row in the table defines on/off for the IP filter for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.7.1.1.1.1 | ColumnhitronWifiBssIPFilterCtrlEnableVal | read-write | current | true(1): IP filter function enabled false(2): IP filter function disabled |
| 1.3.6.1.4.1.8595.80211.5.7.1.1.1.2 | ColumnhitronWifiBssIPFilterCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.80211.5.7.2 | NodehitronWifiBssIPFilterCtrlSetup | |||
| 1.3.6.1.4.1.8595.80211.5.7.2.1 | TablehitronWifiBssIPFilterCtrlSetupTable | not-accessible | current | A table which defined the setup for IP filter control for the each SSID. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1 | RowhitronWifiBssIPFilterCtrlSetupEntry | not-accessible | current | A row in the table defines the setup for the IP filter for a given wifi SSID. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.1 | ColumnhitronWifiBssIPFilterCtrlSetupIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.2 | ColumnhitronWifiBssIPFilterCtrlSetupName | read-write | current | The mnemonic name for the IP filter. Each rule should have different name.If it set to an empty string from an effective name,It means delete this filter from … |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.3 | ColumnhitronWifiBssIPFilterCtrlAddressType | read-write | current | The type of internet address used for IP filter. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.4 | ColumnhitronWifiBssIPFilterCtrlIPStart | read-write | current | Start IP of the filter. This IP value must be located in the same subnet of the wifi SSID. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.5 | ColumnhitronWifiBssIPFilterCtrlIPEnd | read-write | current | End IP of the filter. This IP value must be located in the same subnet of the wifi SSID. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.6 | ColumnhitronWifiBssIPFilterCtrlPortStart | read-write | current | Start Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.7 | ColumnhitronWifiBssIPFilterCtrlPortEnd | read-write | current | End Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.8 | ColumnhitronWifiBssIPFilterCtrlProtocol | read-write | current | selected protocol for IP filter |
| 1.3.6.1.4.1.8595.80211.5.7.2.1.1.9 | ColumnhitronWifiBssIPFilterCtrlActive | read-write | current | true(1): This IP filter rule is activated false(2): This IP filter rule is de-activated. |
| 1.3.6.1.4.1.8595.80211.5.8 | NodehitronWifiMbssRssiDisauth | |||
| 1.3.6.1.4.1.8595.80211.5.8.1 | TablehitronWifiMbssRssiDisauthTable | not-accessible | current | Table containing information for the RssiDisauth definition. |
| 1.3.6.1.4.1.8595.80211.5.8.1.1 | RowhitronWifiMbssRssiDisauthTableEntry | not-accessible | current | A row in this table defines the basic RssiDisauth infromation for the client which collect to a wifi SSID |
| 1.3.6.1.4.1.8595.80211.5.8.1.1.1 | ColumnhitronWifiBssRssiDisauthOnOff | read-write | current | This OID control the control of RSSI disassociate feature on/off . If it's false, disable RSSI disassociate feature. If it's true, enable RSSI disassociate fea… |
| 1.3.6.1.4.1.8595.80211.5.8.1.1.2 | ColumnhitronWifiBssRssiDisauthThreshold | read-write | current | Minimum RSSI disassociate threshold.Default value 0 (disable). |
| 1.3.6.1.4.1.8595.80211.5.8.1.1.3 | ColumnhitronWifiBssRssiDisauthPollingRssiInterval | read-write | current | Polling time interval for check STA RSSI( in second ).Default value 0 (disable). |
| 1.3.6.1.4.1.8595.80211.5.8.1.1.4 | ColumnhitronWifiBssRssiDisauthTimeExceedRssiThreshold | read-write | current | Time of user exceed the RSSI threshold before disassociate.Default value 0 (disable). |
| 1.3.6.1.4.1.8595.80211.6 | ScalarhitronWifiWPS | read-write | current | Enable or disable WPS function. By default Enabled (True). If disabled, the WPS function will not be shown on the webpage. |
| 1.3.6.1.4.1.8595.80211.7 | NodehitronWifiFon | |||
| 1.3.6.1.4.1.8595.80211.7.1 | ScalarfonConfig | read-write | obsolete | Enable or disable FON function. By default disabled (False). If disabled, the Fon function will not be shown on the webpage. |
| 1.3.6.1.4.1.8595.80211.7.2 | ScalarfonDeviceName | read-write | obsolete | The fon public SSID name used for FON functionality. The default full SSID is FON_AP. The name FON_ would be always used to adhere to FON's defintion. The name… |
| 1.3.6.1.4.1.8595.80211.7.3 | ScalarfonSessionUpBandwidth | read-write | obsolete | The upstream bandwidth for each fon user. 0 means no bandwidth limitation for each user. |
| 1.3.6.1.4.1.8595.80211.7.4 | ScalarfonSessionDownBandwidth | read-write | obsolete | The downstream bandwidth for each fon user. 0 means no bandwidth limitation for each user. |
| 1.3.6.1.4.1.8595.80211.7.5 | ScalarfonTotalUpBandwidth | read-write | obsolete | The total allowed for upstream bandwidth for the fon device. 0 means no bandwidth limitation for the fon service. |
| 1.3.6.1.4.1.8595.80211.7.6 | ScalarfonTotalDownBandwidth | read-write | obsolete | The total allowed for downstream bandwidth for the fon device. 0 means no bandwidth limitation for the fon service. |
| 1.3.6.1.4.1.8595.80211.8 | NodehitronWifiSignalReceived | |||
| 1.3.6.1.4.1.8595.80211.8.1 | ScalarhitronWifiSignalReceivedScanRefresh | read-write | current | This OID is to control the client scanning refresh. When the value is set autoRefresh(3), AP would automatically do the scan refresh for every 5 minutes and it… |
| 1.3.6.1.4.1.8595.80211.8.2 | TablehitronWifiSignalReceivedTable | not-accessible | current | A table which displayed the signal received from the wifi client. |
| 1.3.6.1.4.1.8595.80211.8.2.1 | RowhitronWifiSignalReceivedEntry | not-accessible | current | A row in the table displayed the signal received from the wifi client. |
| 1.3.6.1.4.1.8595.80211.8.2.1.1 | ColumnhitronWifiSignalReceivedclientIndex | read-only | current | Integer index of the signal received table |
| 1.3.6.1.4.1.8595.80211.8.2.1.2 | ColumnhitronWifiSignalReceivedMac | read-only | current | Mac address of connected Wifi client |
| 1.3.6.1.4.1.8595.80211.8.2.1.3 | ColumnhitronWifiSignalReceivedRSSI0 | read-only | current | Received signal strength indicator for antenna 1 |
| 1.3.6.1.4.1.8595.80211.8.2.1.4 | ColumnhitronWifiSignalReceivedRSSI1 | read-only | current | Received signal strength indicator for antenna 2 |
| 1.3.6.1.4.1.8595.80211.8.2.1.5 | ColumnhitronWifiSignalReceivedRSSI2 | read-only | current | Received signal strength indicator for antenna 3. This OID is only supported for device with 3 receiving antennas. For devices with 2 receiving antenna, this v… |
| 1.3.6.1.4.1.8595.80211.8.2.1.6 | ColumnhitronWifiSignalReceivedPhMode | read-only | current | The wifi mode for connected wifi client. This value is matched to the physical mode of connected station. If the PhMod is CCK, it is 11b. If the PhMod is OFDM,… |
| 1.3.6.1.4.1.8595.80211.8.2.1.7 | ColumnhitronWifiSignalReceivedRate | read-only | current | Received signal rate |
| 1.3.6.1.4.1.8595.80211.8.3 | ScalarhitronWifiCPECount | read-only | current | After refresh, this OID would show the connected wifi CPE number. |
| 1.3.6.1.4.1.8595.80211.9 | NodehitronWifiSiteSurvey | |||
| 1.3.6.1.4.1.8595.80211.9.1 | ScalarhitronWifiSiteSurveyScanRefresh | read-write | current | Scan or refresh the wifi site survey, if want to read the site survey table, set this oid to true first. it always read as false |
| 1.3.6.1.4.1.8595.80211.9.2 | TablehitronWifiSiteSurveyTable | not-accessible | current | A table which displayed the site survey of surrounding wifi APs. |
| 1.3.6.1.4.1.8595.80211.9.2.1 | RowhitronWifiSiteSurveyEntry | not-accessible | current | A row in the table displayed the site survey of surrounding wifi APs. |
| 1.3.6.1.4.1.8595.80211.9.2.1.1 | ColumnhitronWifiSiteSurveyapIndex | not-accessible | current | Integer index of the site survey table |
| 1.3.6.1.4.1.8595.80211.9.2.1.2 | ColumnhitronWifiSiteSurveyChannel | read-only | current | This OID displays the primary channel used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.3 | ColumnhitronWifiSiteSurveySSID | read-only | current | This OID displays the SSID used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.4 | ColumnhitronWifiSiteSurveyBSSID | read-only | current | This OID displays the BSSID of surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.5 | ColumnhitronWifiSiteSurveySecurity | read-only | current | This OID displays the security mode used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.6 | ColumnhitronWifiSiteSurveySignal | read-only | current | This OID displays the signal strength ,in percentage, of surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.7 | ColumnhitronWifiSiteSurveyWMode | read-only | current | This OID displays the wifi mode (11b, 11g, or 11n) used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.8 | ColumnhitronWifiSiteSurveyExtCH | read-only | current | This OID displays the extended channel mode of the surrounding wifi AP. |
| 1.3.6.1.4.1.8595.80211.9.2.1.9 | ColumnhitronWifiSiteSurveyNT | read-only | current | This OID displays the network type of the surrounding wifi AP, infrastructure or Ad-hoc. |
| 1.3.6.1.4.1.8595.80211.9.2.1.10 | ColumnhitronWifiSiteSurveyWPSDPID | read-only | current | This OID displays whether the target network is using WiFi Protected Setup (WPS) or not. If the target network is using WPS, this field displays whether it is … |
| 1.3.6.1.4.1.8595.80211.10 | NodehitronHotSpotBwCtrl | |||
| 1.3.6.1.4.1.8595.80211.10.1 | ScalarhotSpotUpBandwidth | read-write | obsolete | The total upstream bandwidth for hotspot users. |
| 1.3.6.1.4.1.8595.80211.10.2 | ScalarhotSpotDownBandwidth | read-write | obsolete | The total downstream bandwidth for hotspot users. |
| 1.3.6.1.4.1.8595.80211.11 | NodehitronHotSpotCtrl | |||
| 1.3.6.1.4.1.8595.80211.11.1 | ScalarhitronHotSpotEnabled | read-write | current | This object control whether Hotspot is enabled. |
| 1.3.6.1.4.1.8595.80211.11.2 | ScalarhitronHotSpotType | read-write | current | This object control the HotSpot function type. The type supported depends on the product. Not always all types are supported. |
| 1.3.6.1.4.1.8595.80211.11.3 | NodehotSpotGreTunnelCtrl | |||
| 1.3.6.1.4.1.8595.80211.11.3.1 | ScalarhotSpotGreTunnelTerminationServerDiscoveryType | read-write | current | This object decide the method used to provision the hotSpotGreTunnelTerminationServersTable. If set to auto(1), device would do the DNS query for the FQDN name… |
| 1.3.6.1.4.1.8595.80211.11.3.2 | ScalarhotSpotGreTunnelTerminationServerFqdnDnsRetryTimer | read-write | current | Retry timer(s) triggered when device is unable to resolve the Tunnel Termination Server FQDN Min: 30 seconds Max: 1800 seconds |
| 1.3.6.1.4.1.8595.80211.11.3.3 | ScalarhotSpotGreTunnelTerminationServerPingCount | read-write | current | Number of ICMP PINGs sent at regular interval for Tunnel Termination Server reachability health check |
| 1.3.6.1.4.1.8595.80211.11.3.4 | ScalarhotSpotGreTunnelTerminationServerPingInterval | read-write | current | Configured interval between Tunnel Termination Server reachability health check. the unit for value is second. |
| 1.3.6.1.4.1.8595.80211.11.3.5 | ScalarhotSpotGreTunnelTerminationServerFailoverThreshold | read-write | current | Number of consecutive un-acknowledged pings before the device determines that the Primary Gre Tunnel Termination Server is no longer available and the device s… |
| 1.3.6.1.4.1.8595.80211.11.3.6 | ScalarhotSpotGreTunnelOptOut | read-write | current | This object define if the user has opted out of hotspot service. Returns TRUE if hitronHotSpotEnabled is set to disable using SNMP or config file via TFTP or f… |
| 1.3.6.1.4.1.8595.80211.11.3.7 | ScalarhotSpotGreTunnelInsertSsidInDhcpOption | read-write | current | Enable or disable insertion of DHCP Agent Information Option circuit-ID suboption. |
| 1.3.6.1.4.1.8595.80211.11.3.8 | ScalarhotSpotGreTunnelInsertMacInDhcpOption | read-write | current | Enable or disable insertion of DHCP Agent Information Option Remote-ID suboption. If Enabled, the Gateway will insert the DHCP relay agent Remote-ID suboption … |
| 1.3.6.1.4.1.8595.80211.11.3.9 | ScalarhotSpotGreTunnelDefaultDscp | read-write | current | This object defines the DSCP values used for marking the GRE tunneled packets. Individual ToS overwrite could be done via hitronWifiMbssIpRouteTypeOfService. I… |
| 1.3.6.1.4.1.8595.80211.11.3.10 | ScalarhotSpotGreTunnelAssociatedSsid | read-write | current | This object defines the SSID associated with this Hotspot tunnel Default value = 0x3c (00111100) Only Operator's SSIDs(ssid3~6) are permitted to be associated … |
| 1.3.6.1.4.1.8595.80211.11.3.11 | TablehotSpotGreTunnelTerminationServersTable | not-accessible | current | A table used to configure settings related to the GRE tunnel termination server info. |
| 1.3.6.1.4.1.8595.80211.11.3.11.1 | RowhotSpotGreTunnelTerminationServersEntry | not-accessible | current | Configuration parameters for an individual Hotspot Gre Tunnel Termination Server. |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.1 | ColumnhotSpotGreTunnelTerminationServersIndex | read-only | current | The Hotspot Gre Tunnel Termination Servers index. Please add the Hotspot Gre Tunnel Termination Servers according to the order of priority, and please follow t… |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.2 | ColumnhotSpotGreTunnelTerminationServerFqdn | read-write | current | Hotspot Gre Tunnel Termination Server's FQDN. This object should be provided always if GRE tunnel is enabled to allow the device to do DNS query for the GRE tu… |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.3 | ColumnhotSpotGreTunnelTerminationServerPort | read-write | current | Hotspot Gre Tunnel Termination Server port. |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.4 | ColumnhotSpotGreTunnelTerminationServerPriority | read-write | current | Hotspot Gre Tunnel Termination Server Priority. |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.5 | ColumnhotSpotGreTunnelTerminationServerPrimary | read-write | current | This object identifies whether Hotspot Gre Tunnel Termination Server is Primary or not. If the value is true, then it is primary; otherwise, not. |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.6 | ColumnhotSpotGreTunnelTerminationServerIp | read-write | current | This object define the IP address used as the GRE termination Server. Its value might be retrieved from DNS reply if the hotSpotGreTunnelTerminationServerDisco… |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.7 | ColumnhotSpotGreTunnelTerminationServerIPSource | read-only | current | Reflect the method the Gre tunnel termination server IP record was obtained |
| 1.3.6.1.4.1.8595.80211.11.3.11.1.8 | ColumnhotSpotGreTunnelTerminationServerRowStatus | read-create | current | If hotSpotGreTunnelTerminationServerDiscoveryType is auto: The device must assign a RowStatus of notReady(3) to any new row entry created without a hotSpotGreT… |
| 1.3.6.1.4.1.8595.80211.11.3.12 | TablehotSpotGreTunnelMultipleSsidSettingTable | not-accessible | current | A list of configuration entries for individual SSIDs Associated with the Hotspot GreTunnel. |
| 1.3.6.1.4.1.8595.80211.11.3.12.1 | RowhotSpotGreTunnelMultipleSsidSettingEntry | not-accessible | current | Configuration parameters for each SSID associated with the HotSpot. Only SSIDs that are associated with the Hotspot should return proper value. |
| 1.3.6.1.4.1.8595.80211.11.3.12.1.1 | ColumnhotSpotGreTunnelSsidIndex | read-only | current | The Hotspot Ssid Index. |
| 1.3.6.1.4.1.8595.80211.11.3.12.1.2 | ColumnhotSpotGreTunnelSsidAssociatedWithHotspot | read-only | current | Indicates if this specific SSID is associated with the Hotspot or not. Setting the association is done via hotSpotGreTunnelAssociatedSsid. If the value is true… |
| 1.3.6.1.4.1.8595.80211.11.3.12.1.3 | ColumnhotSpotGreTunnelSsidVlanTag | read-write | current | VLAN ID used in the 802.1q VLAN tag inserted in the tunneled 802.3 frame. VLAN ID is configured for each SSID and is unique |
| 1.3.6.1.4.1.8595.80211.11.3.12.1.4 | ColumnhotSpotGreTunnelSsid | read-write | current | Hotspot SSID string. This OID can configure ONLY SSIDs that are associated with the hotspot (per hotSpotGreTunnelAssociatedSsid ) Other SSID parameters setting… |
| 1.3.6.1.4.1.8595.80211.11.3.12.1.5 | ColumnhotSpotGreTunnelSsidVlanTagEnable | read-write | current | The object controls whether we will insert the Vlan tag when the packets are encapsulated into tunnel traffic. |
| 1.3.6.1.4.1.8595.80211.11.3.13 | ScalarhotSpotGreTunnelSelectedInterface | read-write | current | This object controls which interface is used for the GRE-tunnel. |
| 1.3.6.1.4.1.8595.80211.11.3.14 | ScalarhotSpotGreTunnelTcpMssClampSize | read-write | current | This objects controls the tcp mss clamping size for GRE-tunnel. If enable the VLAN tag when the packets are encapsulated into tunnel traffic, the max MSS size … |
| 1.3.6.1.4.1.8595.80211.12 | TablehitronWifiClientEventTable | not-accessible | current | A row in the table displayed the client connection event for a unit's wifi APs. |
| 1.3.6.1.4.1.8595.80211.12.1 | RowhitronWifiClientEventTableEntry | not-accessible | current | A row in this table defines the basic infromation for the client which collect to a wifi SSID |
| 1.3.6.1.4.1.8595.80211.12.1.1 | ColumnhitronWifiEventIndex | not-accessible | current | indicate the index of the wifi clients' events. |
| 1.3.6.1.4.1.8595.80211.12.1.2 | ColumnhitronWifiEventTime | read-only | current | indicate the time of the wifi client's events occured. |
| 1.3.6.1.4.1.8595.80211.12.1.3 | ColumnhitronWifiEventSSID | read-only | current | indicate the ssid which the wifi client connected or to connect when this event occured. |
| 1.3.6.1.4.1.8595.80211.12.1.4 | ColumnhitronWifiEventMAC | read-only | current | indicate the MAC address for the wifi client of the events . |
| 1.3.6.1.4.1.8595.80211.12.1.5 | ColumnhitronWifiEventLog | read-only | current | indicate the specific log for the wifi client event. |
| 1.3.6.1.4.1.8595.80211.12.1.6 | ColumnhitronWifiEventReset | read-write | current | delete the log which the index pointed to from the table .This value should be false usual,when set to true,the log will be deleted when do apply |
| 1.3.6.1.4.1.8595.80211.13 | ScalarhitronWifiEventControl | read-write | current | This object contrls which ssid's client event should be display in the HitronWifiClientEventTableEntry. Default value = 0xff (11111111),that means the HitronWi… |
| 1.3.6.1.4.1.8595.80211.14 | ScalarhitronWifiEventLogSaveToNvramEnable | read-write | current | If set to true(1), then the wifi client event logs should write to the file in nvram,otherwise,the logs should be write to tmp file under /var/tmp |
| 1.3.6.1.4.1.8595.80211.100 | ScalarwifiApplySettings | read-write | current | If set to true(1), then all settings from this MIB will be applied to the hardware for on-the-fly reconfiguration. Note that any settings made are stored to no… |