MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-DETECT-ENGINE-MIB

10 objects

The HUAWEI-DETECT-ENGINE-MIB contains objects to configure Logic module, including switching logic startup file. This MIB module objects can switch logic startup file for NQA-RTP module or OAM module.

Imported Objects

HUAWEI-MIB	hwDatacomm
IF-MIB	InterfaceIndex
P-BRIDGE-MIB	EnabledStatus
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	BITS Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	AutonomousType DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.5.25.308	IdentityhwDetectEngineMIB			The HUAWEI-DETECT-ENGINE-MIB contains objects to configure Logic module, including switching logic startup file. This MIB module objects can switch logic start…
1.3.6.1.4.1.2011.5.25.308.1	NodehwDetectEngineObject
1.3.6.1.4.1.2011.5.25.308.1.1	NodehwDetectEngineGlobalObjects
1.3.6.1.4.1.2011.5.25.308.1.1.1	ScalarhwDetectEngineOAMEnable	read-write	current	Globally enable or disable the detect-engine for oam. If the hwDetectEngineOAMEnable is 1, detect-engine for oam is enabled. If the hwDetectEngineOAMEnable is …
1.3.6.1.4.1.2011.5.25.308.1.1.2	ScalarhwDetectEngineNQAEnable	read-write	current	Globally enable or disable the detect-engine for nqa-rtp. If the hwDetectEngineNQAEnable is 1, detect-engine for nqa-rtp is enabled. If the hwDetectEngineNQAEn…
1.3.6.1.4.1.2011.5.25.308.100	NodehwDetectEngineConformance
1.3.6.1.4.1.2011.5.25.308.100.1	NodehwDetectEngineCompliances
1.3.6.1.4.1.2011.5.25.308.100.1.1	CompliancehwDetectEngineCompliance		current	Compliance statement for agents that provide full support for hwDetectEngineMIB.
1.3.6.1.4.1.2011.5.25.308.100.2	NodehwDetectEngineGroups
1.3.6.1.4.1.2011.5.25.308.100.2.1	GrouphwDetectEngineGlobalObjectGroup		current	Group for base trap objects.