HUAWEI-MTA-MIB
49 objects
V01-01 mta MIB:HUAWEI-MTA-MIB.mib V1.0 tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17383/huawei, wangxiaoman 20905/huawei, luohui 14047/huawei, chenjiangming 18851/huawei, liuchenglong 25279/huawei, zhuyangbin 30583/huawei, weijiahong 14192/huawei, zhoupeng 22164/huawei, xucongyuan 17403/huawei
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.14 | IdentityhwMTA | V01-01 mta MIB:HUAWEI-MTA-MIB.mib V1.0 tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17383/hua… | ||
| 1.3.6.1.4.1.2011.6.14.1 | NodehwMTAMibObjects | |||
| 1.3.6.1.4.1.2011.6.14.1.1 | TablemtaTable | not-accessible | current | MTA |
| 1.3.6.1.4.1.2011.6.14.1.1.1 | RowmtaEntry | not-accessible | current | MTA |
| 1.3.6.1.4.1.2011.6.14.1.1.1.1 | ColumnhwMtaState | read-only | current | the current state of MTA device, including 1.normal, 2.waiting config, 3.new config error, 4.self detect failed, 5.MTA fault |
| 1.3.6.1.4.1.2011.6.14.1.1.1.2 | ColumnhwMtaHardWareVersion | read-only | current | the current hardware version of MTA device |
| 1.3.6.1.4.1.2011.6.14.1.1.1.3 | ColumnhwMtaSoftWareVersion | read-only | current | the current software version of MTA device |
| 1.3.6.1.4.1.2011.6.14.1.1.1.4 | ColumnhwMtaProtocol | read-create | current | the protocol that MTA support, including:1. Defined privately by HONET, 2. x.50 s bit loop, 3. x.50 s bit=1, 4. x.50 s bit=0 5. I.460 protocol. ( the 4th and 5… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.5 | ColumnhwChannel1Mode | read-create | current | determine working mode of channel 1: a syn. mode, an asyn. mode, or a prohibited mode |
| 1.3.6.1.4.1.2011.6.14.1.1.1.6 | ColumnhwChannel1Rate | read-create | current | determine the service speed of channel 1 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.7 | ColumnhwChannel1DteDce | read-create | current | determine the polarity of channel 1: DCE or DTE |
| 1.3.6.1.4.1.2011.6.14.1.1.1.8 | ColumnhwChannel1Clock | read-create | current | the clock locked mode of channel 1: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.9 | ColumnhwChannel1SignalLinePhase | read-create | current | the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, t… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.10 | ColumnhwChannel1AsynLen | read-create | current | the word length of channel 1 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| 1.3.6.1.4.1.2011.6.14.1.1.1.11 | ColumnhwChannel1BChannelNo | read-create | current | determins the B channel N.O. to carry the data in channel 1 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.12 | ColumnhwChannel1EnvolopPhase | read-create | current | determins the envolop phase to carry the data in channel 1 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.13 | ColumnhwChannel1Status | read-only | current | describes the current state of channel 1 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.14 | ColumnhwChannel2Mode | read-create | current | determine working mode of channel 2: a syn. mode, an asyn. mode, or a prohibited mode |
| 1.3.6.1.4.1.2011.6.14.1.1.1.15 | ColumnhwChannel2Rate | read-create | current | determine the service speed of channel 2 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.16 | ColumnhwChannel2DteDce | read-create | current | determine the polarity of channel 2: DCE or DTE |
| 1.3.6.1.4.1.2011.6.14.1.1.1.17 | ColumnhwChannel2Clock | read-create | current | the clock locked mode of channel 2: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.18 | ColumnhwChannel2SignalLinePhase | read-create | current | the signal line phase of channel 2, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, t… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.19 | ColumnhwChannel2AsynLen | read-create | current | the word length of channel 2 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| 1.3.6.1.4.1.2011.6.14.1.1.1.20 | ColumnhwChannel2BChannelNo | read-create | current | determins the B channel N.O. to carry the data in channel 2 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.21 | ColumnhwChannel2EnvolopPhase | read-create | current | determins the envolop phase to carry the data in channel 2 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.22 | ColumnhwChannel2Status | read-only | current | describes the current state of channel 2 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.23 | ColumnhwChannel3Mode | read-create | current | determine working mode of channel 3: a syn. mode, an asyn. mode, or a prohibited mode |
| 1.3.6.1.4.1.2011.6.14.1.1.1.24 | ColumnhwChannel3Rate | read-create | current | determine the service speed of channel 3 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.25 | ColumnhwChannel3DteDce | read-create | current | determine the polarity of channel 3: DCE or DTE |
| 1.3.6.1.4.1.2011.6.14.1.1.1.26 | ColumnhwChannel3Clock | read-create | current | the clock locked mode of channel 3: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.27 | ColumnhwChannel3SignalLinePhase | read-create | current | the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, t… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.28 | ColumnhwChannel3AsynLen | read-create | current | the word length of channel 3 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| 1.3.6.1.4.1.2011.6.14.1.1.1.29 | ColumnhwChannel3BChannelNo | read-create | current | determins the B channel N.O. to carry the data in channel 3 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.30 | ColumnhwChannel3EnvolopPhase | read-create | current | determins the envolop phase to carry the data in channel 3 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.31 | ColumnhwChannel3Status | read-only | current | describes the current state of channel 3 |
| 1.3.6.1.4.1.2011.6.14.1.1.1.32 | ColumnhwUserIdentity | read-create | current | the identity label of this MTA, and two or more MTAs may have the same identity label |
| 1.3.6.1.4.1.2011.6.14.1.1.1.33 | ColumnhwMaintainOper | read-write | current | defines the maintain operation type, no operation(1) is just for GET, and is of no meaning for SET, CancelLoop(2) cancels all loops of the MTA, thus should not… |
| 1.3.6.1.4.1.2011.6.14.1.1.1.34 | ColumnhwLoopObject | read-write | current | defines the loop object when setting LocalLoop or RemoteLoop operation, Getting this object will get value noOperation(1), while is of no meaning when Setting |
| 1.3.6.1.4.1.2011.6.14.1.1.1.35 | ColumnhwChannel1AlarmStatus | read-only | current | describes the current alarm status of channel 1, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| 1.3.6.1.4.1.2011.6.14.1.1.1.36 | ColumnhwChannel2AlarmStatus | read-only | current | describes the current alarm status of channel 2, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| 1.3.6.1.4.1.2011.6.14.1.1.1.37 | ColumnhwChannel3AlarmStatus | read-only | current | describes the current alarm status of channel 3, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| 1.3.6.1.4.1.2011.6.14.1.1.1.38 | ColumnhwBChannel1AlarmStatus | read-only | current | describes the current alarm status of B channel 1, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment … |
| 1.3.6.1.4.1.2011.6.14.1.1.1.39 | ColumnhwBChannel2AlarmStatus | read-only | current | describes the current alarm status of B channel 2, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment … |
| 1.3.6.1.4.1.2011.6.14.1.1.1.40 | ColumnhwRowStatus | read-create | current | MTA supports the operation createAndGo(4) and Destroy(6) only |
| 1.3.6.1.4.1.2011.6.14.2 | NodehwMTAMibTrap | |||
| 1.3.6.1.4.1.2011.6.14.2.1 | NodehwMTATrapOid | |||
| 1.3.6.1.4.1.2011.6.14.2.2 | NodehwMTATrapsDefine | |||
| 1.3.6.1.4.1.2011.6.14.2.2.0 | NodehwMTATraps | |||
| 1.3.6.1.4.1.2011.6.14.3 | NodehwMTAMibCompance |