MIB Viewer

Search, upload, browse from a database of over 12,000 MIBs and 1,600,000 OIDs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-SUPERLAG-MIB

46 objects

Description.

Imported Objects

HUAWEI-MIB	huaweiMgmt
SNMPv2-SMI	Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.5.25	NodehwDatacomm
1.3.6.1.4.1.2011.5.25.178	IdentityhwSuperLagMIB			Description.
1.3.6.1.4.1.2011.5.25.178.1	NodehwSuperLagObjects
1.3.6.1.4.1.2011.5.25.178.1.1	TablehwSuperLagTable	not-accessible	current	The super LAG table.
1.3.6.1.4.1.2011.5.25.178.1.1.1	RowhwSuperLagEntry	not-accessible	current	Super LAG entry.
1.3.6.1.4.1.2011.5.25.178.1.1.1.1	ColumnhwSuperLagId	not-accessible	current	The ID of the super LAG, it is the index of the super LAG.
1.3.6.1.4.1.2011.5.25.178.1.1.1.2	ColumnhwSuperLagSystemId	read-only	current	The system ID of the super LAG, it is a physical address.
1.3.6.1.4.1.2011.5.25.178.1.1.1.3	ColumnhwSuperLagPri	read-create	current	The priority of the super LAG. The default is 100.
1.3.6.1.4.1.2011.5.25.178.1.1.1.4	ColumnhwSuperLagStatus	read-only	current	The status of the super LAG. 1:initialize 2:backup 3:master
1.3.6.1.4.1.2011.5.25.178.1.1.1.5	ColumnhwSuperLagStatusReason	read-only	current	The reason for the super LAG is in the current status. pri(1):Priority calculation timeout(2):Receiving timer timeout bfdDown(3):BFD detected the control link …
1.3.6.1.4.1.2011.5.25.178.1.1.1.6	ColumnhwSuperLagPeerIpAddr	read-create	current	The IP address of the peer super LAG.
1.3.6.1.4.1.2011.5.25.178.1.1.1.7	ColumnhwSuperLagSourceIpAddr	read-create	current	The source IP address of the super LAG.
1.3.6.1.4.1.2011.5.25.178.1.1.1.8	ColumnhwSuperLagReceiveFailTimeMultiple	read-create	current	The fail time of the super LAG for receiving packets. It is the multiple of sending period.
1.3.6.1.4.1.2011.5.25.178.1.1.1.9	ColumnhwSuperLagSendPeriod	read-create	current	The period for sending packets of the super LAG. The unit is 100ms
1.3.6.1.4.1.2011.5.25.178.1.1.1.10	ColumnhwSuperLagPacketReceive	read-only	current	The number of the received packets.
1.3.6.1.4.1.2011.5.25.178.1.1.1.11	ColumnhwSuperLagPacketSend	read-only	current	The number of the sending packets.
1.3.6.1.4.1.2011.5.25.178.1.1.1.12	ColumnhwSuperLagPacketRecDrop	read-only	current	The number of the droped packets when the packets are received.
1.3.6.1.4.1.2011.5.25.178.1.1.1.13	ColumnhwSuperLagPacketSndDrop	read-only	current	The number of the droped packets when the packets are send out.
1.3.6.1.4.1.2011.5.25.178.1.1.1.14	ColumnhwSuperLagPeerSystemId	read-only	current	The system ID of peer super LAG,it is a physical address.
1.3.6.1.4.1.2011.5.25.178.1.1.1.15	ColumnhwSuperLagPeerPri	read-only	current	The priority of the peer super LAG.
1.3.6.1.4.1.2011.5.25.178.1.1.1.16	ColumnhwSuperLagPeerReceiveFailTime	read-only	current	The fail time of the peer super LAG for receiving packets.The unit is 100ms
1.3.6.1.4.1.2011.5.25.178.1.1.1.17	ColumnhwSuperLagSecurityKeyType	read-create	current	The mode of the security key. 1:The simple encrypt mode; 2:The cipher encrypt mode.
1.3.6.1.4.1.2011.5.25.178.1.1.1.18	ColumnhwSuperLagSecurityKey	read-create	current	This is the security key. It is must be hex number and the most number is 16. If hwSuperLagSecurityKeyType is simple, you can get the key. If hwSuperLagSecurit…
1.3.6.1.4.1.2011.5.25.178.1.1.1.19	ColumnhwSuperLagBfdSessId	read-create	current	The ID of BFD session which is bind to a super LAG. When the status of the link is changed, BFD will notify super LAG.
1.3.6.1.4.1.2011.5.25.178.1.1.1.20	ColumnhwSuperLagResetCounter	read-create	current	Reset hwSuperLagPacketReceive,hwSuperLagPacketSend,hwSuperLagPacketRecDrop,hwSuperLagPacketSndDrop.
1.3.6.1.4.1.2011.5.25.178.1.1.1.50	ColumnhwSuperLagRowStatus	read-create	current	Current operation status of the row.Used to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.2011.5.25.178.1.2	TablehwSuperLagMemberTable	not-accessible	current	The member table of a super LAG.
1.3.6.1.4.1.2011.5.25.178.1.2.1	RowhwSuperLagMemberEntry	not-accessible	current	Member Entry.
1.3.6.1.4.1.2011.5.25.178.1.2.1.1	ColumnhwSuperLagMemberParentSuperLagId	not-accessible	current	The ID of the super LAG which the member is belonged to.
1.3.6.1.4.1.2011.5.25.178.1.2.1.2	ColumnhwSuperLagMemberType	not-accessible	current	The type of the member. Now is EthTrunk only. 1:EthTrunk
1.3.6.1.4.1.2011.5.25.178.1.2.1.3	ColumnhwSuperLagMemberId	not-accessible	current	The ID of the member.
1.3.6.1.4.1.2011.5.25.178.1.2.1.4	ColumnhwSuperLagMemberStatus	read-only	current	The member status. 1:backup 2:master.
1.3.6.1.4.1.2011.5.25.178.1.2.1.5	ColumnhwSuperLagMemberStatusReason	read-only	current	The reason for the member is in the current status. forceBackup(1):The work mode of the member is force-backup forceMaster(2):The work mode of the member is fo…
1.3.6.1.4.1.2011.5.25.178.1.2.1.6	ColumnhwSuperLagMemberWorkMode	read-create	current	The work mode of the member. 1:auto 2:forceBackup 3:forceMaster
1.3.6.1.4.1.2011.5.25.178.1.2.1.7	ColumnhwSuperLagMemberLocaPhylLinkStatus	read-only	current	The local physical link status of the member. 1:up 2:down
1.3.6.1.4.1.2011.5.25.178.1.2.1.50	ColumnhwSuperLagMemberRowStatus	read-create	current	Current operation status of the row.Used to manage the creation and deletion of conceptual rows.
1.3.6.1.4.1.2011.5.25.178.2	NodehwSuperLagTraps
1.3.6.1.4.1.2011.5.25.178.2.1	NotificationhwSuperLagStatusChange		current	The event is generated when the status of the super LAG is changed or the status reason of the super LAG is changed.
1.3.6.1.4.1.2011.5.25.178.2.2	NotificationhwSuperLagMemberStatusChange		current	The event is generated when the status of the memeber is changed or the status reason of the memeber is changed.
1.3.6.1.4.1.2011.5.25.178.3	NodehwSuperLagConformance
1.3.6.1.4.1.2011.5.25.178.3.1	NodehwSuperLagCompliances
1.3.6.1.4.1.2011.5.25.178.3.1.1	CompliancehwSuperLagFullCompliance		current	Description.
1.3.6.1.4.1.2011.5.25.178.3.2	NodehwSuperLagGroups
1.3.6.1.4.1.2011.5.25.178.3.2.1	GrouphwSuperLagGroup		current	Description.
1.3.6.1.4.1.2011.5.25.178.3.2.2	GrouphwSuperLagMemberGroup		current	Description.
1.3.6.1.4.1.2011.5.25.178.3.2.3	GrouphwSuperLagNotificationGroup		current	Description.