MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-TUNNEL-MIB

63 objects

V2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description.

Imported Objects

HUAWEI-MIB	hwDatacomm
IF-MIB	ifIndex
INET-ADDRESS-MIB	InetAddress InetAddressType
IPV6-MIB	ipv6IfIndex
IPV6-TC	Ipv6Address
P-BRIDGE-MIB	EnabledStatus
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString RowStatus TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.5.25.201	IdentityhwTunnelMib			V2.05 Update hwHybridDynBwPunish and hwHybridDynBwResume, modify their description.
1.3.6.1.4.1.2011.5.25.201.1	NodehwTunnelMibObjects
1.3.6.1.4.1.2011.5.25.201.1.1	TablehwTunnelCfgTable	not-accessible	current	MIB table for the tunnel configuration information.
1.3.6.1.4.1.2011.5.25.201.1.1.1	RowhwTunnelCfgEntry	not-accessible	current	Describes tunnel interface configuration information.
1.3.6.1.4.1.2011.5.25.201.1.1.1.1	ColumnhwTunnelProtocol	read-write	current	This object specifies the Tunnel protocol type.
1.3.6.1.4.1.2011.5.25.201.1.1.1.2	ColumnhwTunnelSourceType	read-write	current	This object specifies the Tunnel source type.
1.3.6.1.4.1.2011.5.25.201.1.1.1.3	ColumnhwTunnelSrcIfName	read-write	current	This object specifies the tunnel source interface name.
1.3.6.1.4.1.2011.5.25.201.1.1.1.4	ColumnhwTunnelAddrType	read-write	current	This object specifies the address type for Tunnel source and destination address.
1.3.6.1.4.1.2011.5.25.201.1.1.1.5	ColumnhwTunnelSourceAddr	read-write	current	This object specifies source address of the tunnel interface.
1.3.6.1.4.1.2011.5.25.201.1.1.1.6	ColumnhwTunnelDestinationAddr	read-write	current	This object specifies destination address of the tunnel interface.
1.3.6.1.4.1.2011.5.25.201.1.1.1.7	ColumnhwTunnelCfgUndoFlag	read-write	current	This object specifies undo operation for specified hwTunnelCfgTable parameter.
1.3.6.1.4.1.2011.5.25.201.1.2	TablehwIpv6Tunnel4Over6CfgTable	not-accessible	current	MIB table for 4Over6 tunnel configuration information.
1.3.6.1.4.1.2011.5.25.201.1.2.1	RowhwIpv6Tunnel4Over6CfgEntry	not-accessible	current	Describes IPv6 tunnel 4Over6 parameters.
1.3.6.1.4.1.2011.5.25.201.1.2.1.1	ColumnhwIpv6TunnelEncapLimit	read-write	current	This object specifies Tunnel ipv4-ipv6 encapsulation limit.
1.3.6.1.4.1.2011.5.25.201.1.2.1.2	ColumnhwIpv6TunnelEncapLimitDisable	read-only	current	This object specifies Tunnel encapsulation is disabled or not. Default value is false.
1.3.6.1.4.1.2011.5.25.201.1.2.1.3	ColumnhwIpv6TunnelFlowLabel	read-write	current	This object specifies Tunnel ipv4-ipv6 flow label.
1.3.6.1.4.1.2011.5.25.201.1.2.1.4	ColumnhwIpv6TunnelHopLimit	read-write	current	This object specifies Tunnel ipv4-ipv6 hop limit.
1.3.6.1.4.1.2011.5.25.201.1.2.1.5	ColumnhwIpv6TunnelTrafficClass	read-write	current	This object specifies Tunnel ipv4-ipv6 traffic-class.
1.3.6.1.4.1.2011.5.25.201.1.2.1.6	ColumnhwIpv6TunnelTrafficOriginal	read-write	current	Specifies Tunnel ipv4-ipv6 traffic-class original is enabled or not.
1.3.6.1.4.1.2011.5.25.201.1.2.1.7	ColumnhwIPv6Tunnel4Over6CfgUndoFlag	read-write	current	This object specifies undo operation for specified hwIpv6Tunnel4Over6CfgTable parameter.
1.3.6.1.4.1.2011.5.25.201.1.3	NodehwTunnelGlobalConfigObject
1.3.6.1.4.1.2011.5.25.201.1.3.1	ScalarhwTunnelCreateFailCheckPeriod	read-write	current	This value of this object identifies the interval used to check tunnel failures.
1.3.6.1.4.1.2011.5.25.201.1.3.2	ScalarhwTunnelCreateFailThreshold	read-write	current	This value of this object identifies the threshold of tunnel failures.
1.3.6.1.4.1.2011.5.25.201.1.3.3	ScalarhwTunnelKeepaliveTimeoutPeriod	read-write	current	This value of this object identifies the interval used to check tunnel keepalive timeouts.
1.3.6.1.4.1.2011.5.25.201.1.3.4	ScalarhwTunnelKeepaliveTimeoutThreshold	read-write	current	This value of this object identifies the threshold of tunnel keepalive timeouts.
1.3.6.1.4.1.2011.5.25.201.1.4	TablehwHybridAccessTunnelGlobalStatTable	not-accessible	current	This object indicates the MIB table for hybrid access tunnel statistics information.
1.3.6.1.4.1.2011.5.25.201.1.4.1	RowhwHybridAccessTunnelGlobalStatEntry	not-accessible	current	This object indicates the hybrid access tunnel statistics parameters.
1.3.6.1.4.1.2011.5.25.201.1.4.1.1	ColumnhwTunnelType	not-accessible	current	This object indicates the tunnel type.
1.3.6.1.4.1.2011.5.25.201.1.4.1.2	ColumnhwTunnelCreateSuccessCnt	read-only	current	The value of this object identifies the total number of GRE tunnels set up on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.3	ColumnhwTunnelRequestPktRcvCnt	read-only	current	The value of this object identifies the total number of requests to create GRE tunnels on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.4	ColumnhwTunnelAuthenSuccessCnt	read-only	current	The value of this object identifies the number of authentication successes of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.5	ColumnhwTunnelAuthorSuccessCnt	read-only	current	The value of this object identifies the number of authorization successes of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.6	ColumnhwTunnelAuthenAttemptCnt	read-only	current	The value of this object identifies the number of authentication attempts of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.7	ColumnhwTunnelAuthorAttemptCnt	read-only	current	The value of this object identifies the number of of authorization attempts of GRE Tunnels.
1.3.6.1.4.1.2011.5.25.201.1.4.1.8	ColumnhwTunnelTimeOutCnt	read-only	current	The value of this object identifies the number of of tunnels that have timed out.
1.3.6.1.4.1.2011.5.25.201.1.4.1.9	ColumnhwTunnelAuthUnknownCnt	read-only	current	The value of this object identifies the number of authentication/authorization requests rejected because of Unknown Customer
1.3.6.1.4.1.2011.5.25.201.1.4.1.10	ColumnhwTunnelAuthNotAllowedCnt	read-only	current	The value of this object identifies the number of authentication/authorization requests rejected because of Service not allowed
1.3.6.1.4.1.2011.5.25.201.1.4.1.11	ColumnhwTunnelAuthFailOthersCnt	read-only	current	The value of this object identifies the number of authentication/authorization requests rejected because of Others reason.
1.3.6.1.4.1.2011.5.25.201.1.4.1.12	ColumnhwTunnelCreateFailCnt	read-only	current	The value of this object identifies the total number of GRE tunnel creation failures on each device.
1.3.6.1.4.1.2011.5.25.201.1.4.1.13	ColumnhwTunnelInDataFlow	read-only	current	This object indicates the uplink data volume using the tunnel connection.
1.3.6.1.4.1.2011.5.25.201.1.4.1.14	ColumnhwTunnelOutDataFlow	read-only	current	This object indicates the downlink data volume using the tunnel connection.
1.3.6.1.4.1.2011.5.25.201.1.5	NodehwTunnelTrapObjects
1.3.6.1.4.1.2011.5.25.201.1.5.1	ScalarhwHybridRttThreshold	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel rtt check threshold.
1.3.6.1.4.1.2011.5.25.201.1.5.2	ScalarhwHybridRttCheckTimes	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel rtt check times.
1.3.6.1.4.1.2011.5.25.201.1.5.3	ScalarhwHybridCreateFailValue	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel create fail error value.
1.3.6.1.4.1.2011.5.25.201.1.5.4	ScalarhwHybridTunnelType	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel type.
1.3.6.1.4.1.2011.5.25.201.1.5.5	ScalarhwHybridDynDLBwAdjustValue	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel down-link bandwith adjust value.
1.3.6.1.4.1.2011.5.25.201.1.5.6	ScalarhwHybridDynULBwAdjustValue	accessible-for-notify	current	The value of this object identifies the hybrid-access tunnel up-link bandwith adjust value.
1.3.6.1.4.1.2011.5.25.201.2	NodehwTunnelMibConformance
1.3.6.1.4.1.2011.5.25.201.2.1	NodehwTunnelCompliances
1.3.6.1.4.1.2011.5.25.201.2.1.1	CompliancehwTunnelCompliance		current	The compliance statement for systems supporting the HUAWEI-TUNNEL-MIB.
1.3.6.1.4.1.2011.5.25.201.2.2	NodehwTunnelGroups
1.3.6.1.4.1.2011.5.25.201.2.2.1	GrouphwTunnelGroup		current	The Tunnel table member.
1.3.6.1.4.1.2011.5.25.201.2.2.2	GrouphwTunnelNotificationGroup		current	Tunnel trap group.
1.3.6.1.4.1.2011.5.25.201.3	NodehwTunnelNotifications
1.3.6.1.4.1.2011.5.25.201.3.1	NotificationhwTunnelCreateFailOverThreshold		current	This object indicates that an alarm is generated if the number of tunnel failures exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.2	NotificationhwOverflowTunnelTimeoutOverThreshold		current	This object indicates that an alarm is generated if the number of overflow tunnel timeouts of hello packets exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.3	NotificationhwPriorTunnelTimeoutOverThreshold		current	This object indicates that an alarm is generated if the number of priority tunnel timeouts of hello packets exceeds the threshold during a period.
1.3.6.1.4.1.2011.5.25.201.3.4	NotificationhwHybridTunnelCreateFail		current	This object indicates that the overflow or priority tunnel fails to be created.
1.3.6.1.4.1.2011.5.25.201.3.5	NotificationhwHybridSwitch2PriorTunnel		current	This object indicates that the delay of the overflow tunnel exceeds the threshold and traffic is switched to the priority tunnel.
1.3.6.1.4.1.2011.5.25.201.3.6	NotificationhwHybridSwitch2OverflowTunnel		current	This object indicates that that the delay of the overflow tunnel falls below the threshold and can be used to forward traffic again.
1.3.6.1.4.1.2011.5.25.201.3.7	NotificationhwHybridDynBwPunish		current	This object indicates that the bandwidth of the priority tunnel needs to be reduced.
1.3.6.1.4.1.2011.5.25.201.3.8	NotificationhwHybridDynBwResume		current	This object indicates that the bandwidth of the priority tunnel needs to be increased.