MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-USA-MIB

21 objects

Please provide the descritpion.

Imported Objects

HUAWEI-MIB	hwBRASMib
P-BRIDGE-MIB	EnabledStatus
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC	DisplayString MacAddress RowStatus

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.5.25.40.20	IdentityhwUSA			Please provide the descritpion.
1.3.6.1.4.1.2011.5.25.40.20.1	NodehwUSAObjects
1.3.6.1.4.1.2011.5.25.40.20.1.1	TablehwUSAConfigTable	not-accessible	current	The table describes USA configuration.
1.3.6.1.4.1.2011.5.25.40.20.1.1.1	RowhwUSAConfigEntry	not-accessible	current	Description.
1.3.6.1.4.1.2011.5.25.40.20.1.1.1.1	ColumnhwUSAPortIndex	read-only	current	USC Portindex.
1.3.6.1.4.1.2011.5.25.40.20.1.1.1.2	ColumnhwUSAInterfaceName	read-write	current	The URL of portal.
1.3.6.1.4.1.2011.5.25.40.20.1.1.1.3	ColumnhwAuthenAccessPoint	read-write	current	authentication access-point. disable:2 , enable:1
1.3.6.1.4.1.2011.5.25.40.20.1.2	TablehwAssociateUserTable	not-accessible	current	The table describes USA configuration.
1.3.6.1.4.1.2011.5.25.40.20.1.2.1	RowhwAssociateUserEntry	not-accessible	current	Associate table of users
1.3.6.1.4.1.2011.5.25.40.20.1.2.1.1	ColumnhwAssociateUserIndex	read-only	current	hwAssociateUserIndex
1.3.6.1.4.1.2011.5.25.40.20.1.2.1.2	ColumnhwAssociateUserMac	read-only	current	AssociateUser mac.
1.3.6.1.4.1.2011.5.25.40.20.1.2.1.3	ColumnhwAssociateUserIp	read-only	current	AssociateUser ip.
1.3.6.1.4.1.2011.5.25.40.20.1.2.1.4	ColumnhwAssociateUserStates	read-only	current	AssociateUser status : 0 - IDLE, 1 - ASSOCIATED, 2 - UP
1.3.6.1.4.1.2011.5.25.40.20.1.2.1.5	ColumnhwAssociateType	read-only	current	AssociateUser type : 0 -arp,1 - dot1x, 2 - dhcp, 3 - http
1.3.6.1.4.1.2011.5.25.40.20.1.3	ScalarhwUserDetectInterval	read-write	current	The Global user detect interval.default : 15
1.3.6.1.4.1.2011.5.25.40.20.1.4	ScalarhwUserDetectRetry	read-write	current	The Global detect retry times.default : 3
1.3.6.1.4.1.2011.5.25.40.20.1.5	ScalarhwUserSyncInterval	read-write	current	The Global user sync interval.default : 60
1.3.6.1.4.1.2011.5.25.40.20.1.6	ScalarhwGlobalLinkDownOffline	read-write	current	The Global port link-down offline.default : 0
1.3.6.1.4.1.2011.5.25.40.20.1.7	ScalarhwGlobalControlDownOffline	read-write	current	The Global port control-down offline.default : 0
1.3.6.1.4.1.2011.5.25.40.20.1.8	ScalarhwAuthenSpeedLimitMaxNum	read-write	current	The Global authentication speed limit max-num.default : 60
1.3.6.1.4.1.2011.5.25.40.20.1.9	ScalarhwAuthenSpeedLimitInterval	read-write	current	The Global authentication limit interval.default : 30