HUAWEI-WLAN-RADIO-MIB
603 objects
The HUAWEI-WLAN-RADIO-MIB contains objects to realize the management of AC at the side of the quality of wireless signal for AP.
Imported Objects
| HUAWEI-WLAN-DEVICE-MIB | hwApIndex hwApMac hwApRegionIndex |
| HUAWEI-WLAN-MIB | hwWlan |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.139.3 | IdentityhwRadio | The HUAWEI-WLAN-RADIO-MIB contains objects to realize the management of AC at the side of the quality of wireless signal for AP. | ||
| 1.3.6.1.4.1.2011.6.139.3.1 | TablehwRadioProfileTable | not-accessible | current | Huawei radio profile table. Radio profile is aggregate of a group of configuration. The content of the table contains : radio profile name, radio type, radio r… |
| 1.3.6.1.4.1.2011.6.139.3.1.1 | RowhwRadioProfileEntry | not-accessible | current | Huawei radio profile table entry. The entry of the huawei radio profile table, all the nodes of the huawei radio profile table are been configured. The detail … |
| 1.3.6.1.4.1.2011.6.139.3.1.1.1 | ColumnhwRadioProfileName | not-accessible | current | A human readable string representing the name of the radio profile. This is the (radio profile) model dependent radio profile ID. The request of the radio paro… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.2 | ColumnhwRadioType | read-create | current | The radio type is supported by the radio profile.Each radio type has its corresponding radio model. This is the (radio profile) model dependent radio profile I… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.3 | ColumnhwRadioRateMode | read-only | current | An object, which causes the way change to the radio support rate as the given mode when it's been modified. The meaning of the value in the enum list describe … |
| 1.3.6.1.4.1.2011.6.139.3.1.1.4 | ColumnhwRadioRateValue | read-create | current | The value of radio support rate, which is used together with the radio rate mode, designates the max rate of transmission by the radio profile. While the radio… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.5 | ColumnhwRadioChannelMode | read-create | current | The control mode of radio's channel. Auto means radio chooses the feat channel automatically on the basis of the detectted circumambienceis of the wireless sig… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.6 | ColumnhwRadioPowerMode | read-create | current | The control mode of radio's power level. Auto means radio chooses the feat power level automatically on the basis of the detectted circumambienceis of the wire… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.7 | ColumnhwRadioCalibrateInterval | read-create | current | An interval uses to detect the rate of the lost signal packets and the conflicted signal packets periodically. If it sets the interval, radio will detect the s… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.8 | ColumnhwRadioPERThreshold | read-create | current | A threshold standard, which uses the units percent ,gives an utmost rate to the lost signal packet or the error signal packet. The range of the threshold is fr… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.9 | ColumnhwRadioConfictRateThreshold | read-create | current | A threshold standard, which uses the units percent ,gives an utmost rate to the conflicted signal packet. The range of the threshold is from 20 to 80 percent, … |
| 1.3.6.1.4.1.2011.6.139.3.1.1.10 | ColumnhwRadioRTSThreshold | read-create | current | A threshold standard, which judges whether need to send a RTS frame, gives an utmost length to the frame packet from the MAC layer. Once the length of a frame … |
| 1.3.6.1.4.1.2011.6.139.3.1.1.11 | ColumnhwRadioFragmentThreshold | read-create | current | A threshold standard, which judges whether need to split a frame to several frames, gives an utmost length to the frame packet from the MAC layer. Once the len… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.12 | ColumnhwRadioShortFrameRetryTimes | read-create | current | A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to send a short frame packet from the MAC l… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.13 | ColumnhwRadioLongFrameRetryTimes | read-create | current | A threshold standard, which judges whether a frame need to retry to send or discard, gives an utmost times to retry to send a long frame packet from the MAC la… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.14 | ColumnhwRadioSupportShortPreamble | read-create | current | A switch flag, which set the short preamble status as enable or disable, tells whether the short preamble is supported by the radio. Enable means the radio sup… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.15 | ColumnhwRadioDTIMInterval | read-create | current | An interval uses to set the parameter of DTIM periods of a radio profile. The DTIM interval means between two DTIM beacon how much Beacons have been sended. DT… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.16 | ColumnhwRadioBeaconInterval | read-create | current | An interval uses to specify the number of TUs that a station should use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Resp… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.17 | ColumnhwRadioWMMProfileName | read-create | current | A human readable string representing the name of the WMM profile. WMM means WI-FI multimedia. This is the (radio profile) model dependent WMM profile ID. The r… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.18 | ColumnhwRadioProfileRowStatus | read-create | current | An object is used to create or delete a radio profile. There are some restrictions of operation of the radio profile. - It needs a radio profile id for the cre… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.19 | ColumnhwRadio80211nGuardIntervalMode | read-create | current | The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well. Normal means it… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.20 | ColumnhwRadio80211nAMPDUMaxLengthExponent | read-create | current | The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit. In order to reduce the spending of transmission, 80211n brin… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.21 | ColumnhwRadioCalibrateEnable | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.22 | ColumnhwRadioInterfDetDevice | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.23 | ColumnhwRadioApComInterfThreshold | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.24 | ColumnhwRadioApAdjInterfThreshold | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.25 | ColumnhwRadioStaInterfThreshold | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.26 | ColumnhwRadioDeviceReportDuration | read-create | current | The reporting duration of the radio device. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.27 | ColumnhwRadioRTSMode | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.28 | ColumnhwRadioWifiLight | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.29 | ColumnhwRadioBeamformingSwitch | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.30 | ColumnhwRadioWidsDevSynchronizationInt | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.31 | ColumnhwRadioChannelSwitchAnnouncement | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.32 | ColumnhwRadioChannelSwitchMode | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.33 | ColumnhwRadioStaAccessSignalStrengthSwitch | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.34 | ColumnhwRadioStaAccessSignalStrengthThreshold | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.35 | ColumnhwRadioBackgroundListenNeighborSwitch | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.36 | ColumnhwRadioBackgroundScanningServiceThreshold | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.37 | ColumnhwRadioBackgroundScanningClientThreshold | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.38 | ColumnhwRadioStaAccessRateLimitSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.39 | ColumnhwRadioStaAccessRateLimitThreshold | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.40 | ColumnhwRadioSpectrumAnalysisScanPeriod | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.41 | ColumnhwRadioSpectrumAnalysisScanInterval | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.42 | ColumnhwRadioHighDenseSwitch | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.2011.6.139.3.1.1.43 | ColumnhwRadioHighDenseMode | read-write | current | 0:low mode 1:middle mode 2:high mode |
| 1.3.6.1.4.1.2011.6.139.3.1.1.44 | ColumnhwRadioStaOfflineSignalStrengthSwitch | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.2011.6.139.3.1.1.45 | ColumnhwRadioStaOfflineSignalStrengthThreshold | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.46 | ColumnhwRadioStaOfflineRateLimitSwitch | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.2011.6.139.3.1.1.47 | ColumnhwRadioStaOfflineRateThreshold | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.48 | ColumnhwRadioDynamicAdjustPowerSwitch | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.2011.6.139.3.1.1.49 | ColumnhwRadioLocationReportTime | read-write | current | |
| 1.3.6.1.4.1.2011.6.139.3.1.1.50 | ColumnhwRadioLocationScanInterval | read-write | current | |
| 1.3.6.1.4.1.2011.6.139.3.1.1.51 | ColumnhwRadioLocationScanPeriod | read-write | current | |
| 1.3.6.1.4.1.2011.6.139.3.1.1.52 | ColumnhwRadioAirTimeScheduleSwitch | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.2011.6.139.3.1.1.53 | ColumnhwRadioCalibrateScanCycle | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.54 | ColumnhwRadioUacPolicyType | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.55 | ColumnhwRadioUacPolicySwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.56 | ColumnhwRadioUacAccessThreshold | read-write | current | when uac policy type is users, the value range from 0 to 128, when uac policy type is channel utilization, the value range from 0 to 100. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.57 | ColumnhwRadioUacRoamThreshold | read-write | current | when uac policy type is users, the value range from 0 to 128, when uac policy type is channel utilization, the value range from 0 to 100. the value of Roam thr… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.58 | ColumnhwRadioUacHideSSIDSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.59 | ColumnhwRadio80211acGuardIntervalMode | read-create | current | The mode uses to set the guard interval which is the necessary interval to receive and dispatch wireless signal to make the communication well. Normal means it… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.60 | ColumnhwRadio80211acAMPDUMaxLengthExponent | read-create | current | The limit length of an AMPDU frame. AMPDU is the abbreviation of aggregate MAC protocol data unit. In order to reduce the spending of transmission, 80211ac bri… |
| 1.3.6.1.4.1.2011.6.139.3.1.1.61 | ColumnhwRadio80211bgBasicRateSet | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.62 | ColumnhwRadio80211bgSupportRateSet | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.63 | ColumnhwRadio80211aBasicRateSet | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.64 | ColumnhwRadio80211aSupportRateSet | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.65 | ColumnhwRadio80211nSupportMCS | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.67 | ColumnhwRadio80211acSupportMcsMapMcs | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.68 | ColumnhwRadioMulticastRate2G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.69 | ColumnhwRadioMulticastRate5G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.70 | ColumnhwRadioLegacyStationEnable | read-create | current | Allow legacy station access. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.71 | ColumnhwRadioLocationScanChannel2G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.72 | ColumnhwRadioLocationScanChannel5G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.73 | ColumnhwRadioAMSDUTxEnable | read-create | current | Send with A-MSDU. |
| 1.3.6.1.4.1.2011.6.139.3.1.1.74 | ColumnhwRadioAMSDUTxMaxSubFrames | read-create | current | The maximum number of sub MSDUs in a A-MSDU. |
| 1.3.6.1.4.1.2011.6.139.3.2 | TablehwRadioManageTable | not-accessible | current | Huawei radio manage table, it is aggregate of a group of management of radio, such as modification and display. The content of the table contains: radio ID, ra… |
| 1.3.6.1.4.1.2011.6.139.3.2.1 | RowhwRadioManageEntry | not-accessible | current | Huawei radio management table entry. The entry of the huawei radio management table, all the nodes of the huawei radio management table are been operated here.… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.1 | ColumnhwRadioID | accessible-for-notify | current | A exclusive identifier of a radio. The range of the radio id is from 0 to 3, and the default radio id is 0. Notes the setting of radio id must insure the radio… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.2 | ColumnhwRadioMngBaseBssID | read-only | current | You can get an effective baseBssID ,only when wlan 1 is created. Or you will get a noneffective value. BSSID identifies a minimum service set,When administrato… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.3 | ColumnhwRadioMngRadioProfileName | read-write | current | The radio profile which is binded to this radio. The request of the radio parofile name string in detail as follows: - The length of the radio profile name at … |
| 1.3.6.1.4.1.2011.6.139.3.2.1.4 | ColumnhwRadioMngState | read-write | current | A switch flag, which set the radio status as enable or disable, tells whether the wireless signal transmission is supported by the radio. Enable means the radi… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.5 | ColumnhwRadioMngChannel | read-write | current | An object uses to set the channel of a radio. The value of the channel is decided by the channel mode.Such as ,the enum value of channel is 1, 6, 11 on the con… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.6 | ColumnhwRadioMngPowerLevel | read-write | current | An object uses to set the power level of a radio. The range of the power level of a radio is from 0 to 3. the power of power level 0 is the maximum power, the … |
| 1.3.6.1.4.1.2011.6.139.3.2.1.7 | ColumnhwRadioMngPower | read-write | current | An object uses to display the power (in 0.01dbm) which is currently used by this radio. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.8 | ColumnhwRadioAvailableSntennaNumber | read-create | current | An object set the available antenna number,which can close some antennas to save electric power. All means it uses all the available antenna, Num1 means it use… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.9 | ColumnhwRadioWorkingChannel | read-only | current | An object uses to display the working channel which is currently used by this radio. Notes the radio working channel just can be display,but can't be configure… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.10 | ColumnhwRadioWorkingPowerLevel | read-only | current | An object uses to display the working power level which is currently used by this radio. Notes the radio working power level just can be display,but can't be c… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.11 | ColumnhwRadioWorkingPower | read-only | current | An object is used to describing the working porwer (in 0.01dbm) that the radio is working on actually. You just can read it when the radio is working. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.12 | ColumnhwRadioMngChannelBandwidth | read-write | current | An object is used to describing the bandwidth that the AP support .You can config the AP bandwidth by the hwRadioMngChannelBandwidth, but the AP may be not wor… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.13 | ColumnhwRadioWorkingChannelBandwidth | read-only | current | An object is used to describing the bandwidth that the AP working on actually. the value may be unknown(-1) HT20(1) HT40-plus(2) or HT40-minus(3) . |
| 1.3.6.1.4.1.2011.6.139.3.2.1.14 | ColumnhwRadio80211nMCSValue | read-write | current | An object is used to describing the 802.11n AP's MCS Value. The MCS means modulation and coding scheme. Tha value of MCS will changed for value of spatial stre… |
| 1.3.6.1.4.1.2011.6.139.3.2.1.15 | ColumnhwRadioWidsWorkMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.16 | ColumnhwRadioMngBinded | read-write | current | Object selects a mechanism for bind/unbind the radio-profile |
| 1.3.6.1.4.1.2011.6.139.3.2.1.17 | ColumnhwRadioDeviceDetectEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.18 | ColumnhwRadioMaxTxPwrLvl | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.19 | ColumnhwRadioPwrAttRange | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.20 | ColumnhwRadioPwrAttValue | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.21 | ColumnhwRadioAntennaGain | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.22 | ColumnhwRadioBridgeWhitelistEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.23 | ColumnhwRadioBridgeWhitelistName | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.24 | ColumnhwRadioBridgeStpSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.25 | ColumnhwRadioBridgeSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.26 | ColumnhwRadioBridgeMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.27 | ColumnhwRadioUndoBridgeWhitelist | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.28 | ColumnhwRadioUserTrafficScheduler | read-write | obsolete | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.29 | ColumnhwRadioCountermeasuresMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.30 | ColumnhwRadioFrequency | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.31 | ColumnhwRadioCountermeasuresSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.32 | ColumnhwRadioSpectrumAnalysisEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.33 | ColumnhwRadioWidsAttackDetEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.34 | ColumnhwRadioMeshWhitelistName | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.35 | ColumnhwRadioUndoMeshWhitelist | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.36 | ColumnhwRadioMeshRole | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.37 | ColumnhwRadioLocationEnable | read-write | current | 0: disable 1: enable. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.38 | ColumnhwRadioLocationScanChannelEnable | read-write | current | 0: disable 1: enable. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.39 | ColumnhwRadio80211nMulticastMCSValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.40 | ColumnhwRadioSpectrogramServerReportEnable | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.2011.6.139.3.2.1.41 | ColumnhwRadioRadioMulticastRateValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.42 | ColumnhwRadio11acSpatialStream | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.43 | ColumnhwRadio11acMCSValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.2.1.44 | ColumnhwRadioActiveSwitch | read-write | current | Mesh handover feature: Fat AP receive dormancy or active signal through snmp. When the signal is active, radio of fat ap is enable and send RARP packet; When t… |
| 1.3.6.1.4.1.2011.6.139.3.3 | TablehwRadioCalibrateStatisicsTable | not-accessible | current | Huawei radio manage table, it is aggregate of a group of operation to the containing attributes of radio calibrate counters. Such as display and cleanup. The c… |
| 1.3.6.1.4.1.2011.6.139.3.3.1 | RowhwRadioCalibrateStatisicsEntry | not-accessible | current | Huawei radio calibrate statisics entry. The entry of the huawei radio calibrate statisics table, all the nodes of the huawei radio calibrate statisics table ar… |
| 1.3.6.1.4.1.2011.6.139.3.3.1.1 | ColumnhwRadioCalStatisSignalBadCount | read-only | current | An object uses to display the radio calibrate statistic signal bad count. This count shall increment when a rado calibration is caused by bad signal qaulity, s… |
| 1.3.6.1.4.1.2011.6.139.3.3.1.2 | ColumnhwRadioCalStatisCalibratePowerCount | read-only | current | An object uses to display the radio calibrate statistic calibrate power count. This count shall increment when rado calibrates the power level of this radio. |
| 1.3.6.1.4.1.2011.6.139.3.3.1.3 | ColumnhwRadioCalStatisCalibrateChannelCount | read-only | current | An object uses to display the radio calibrate statistic calibrate channel count. This count shall increment when rado calibrates the channel of this radio. |
| 1.3.6.1.4.1.2011.6.139.3.3.1.4 | ColumnhwRadioCalibrateStatisicsOperMode | read-write | current | An object uses to set the radio calibrate statisics operation mode. Invalid means the operation is invalid, clear-statistic means it clear the radio calibrate … |
| 1.3.6.1.4.1.2011.6.139.3.4 | TablehwRadioAuthNeighborInfTable | not-accessible | current | Huawei radio authentic neighbor information table, it is aggregate of a group of display to the authentic neighbor AP infomation of radio. The authentic neighb… |
| 1.3.6.1.4.1.2011.6.139.3.4.1 | RowhwRadioAuthNeighborInfEntry | not-accessible | current | Huawei radio authentic neighbor information table entry. The entry of the huawei radio authentic neighbor information table, all the nodes of the huawei radio … |
| 1.3.6.1.4.1.2011.6.139.3.4.1.1 | ColumnhwAuthenticRadioNeighborAPID | read-only | current | An object uses to display the AP ID list of the authentic neighbor ap of the radio. Any of two authentic neighbor AP ID of the list should separate with questi… |
| 1.3.6.1.4.1.2011.6.139.3.4.1.2 | ColumnhwAuthenticRadioNeighborChannel | read-only | current | An object uses to display the signal channel list of the authentic neighbor ap of the radio. Any of two authentic neighbor AP signal channel of the list should… |
| 1.3.6.1.4.1.2011.6.139.3.4.1.3 | ColumnhwAuthenticRadioNeighborFrontAttenu | read-only | current | An object uses to display the front attenuation list of the authentic neighbor ap of the radio. Any of two authentic neighbor front attenuation of the list sho… |
| 1.3.6.1.4.1.2011.6.139.3.4.1.4 | ColumnhwAuthenticRadioNeighborBackAttenu | read-only | current | An object uses to display the back attenuation list of the authentic neighbor ap of the radio. Any of two authentic neighbor back attenuation of the list shoul… |
| 1.3.6.1.4.1.2011.6.139.3.4.1.5 | ColumnhwAuthenticRadioNeighborSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.5 | TablehwRadioLoadBalanceGroupTable | not-accessible | current | Huawei radio load balance group table, it is aggregate of a group of operation to load balance group and its parameter. it can balance the connected use number… |
| 1.3.6.1.4.1.2011.6.139.3.5.1 | RowhwRadioLoadBalanceGroupEntry | not-accessible | current | Huawei radio load balance group table entry. The entry of the huawei radio load balance group table, all the nodes of the huawei radio load balance group table… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.1 | ColumnhwLBGroupName | not-accessible | current | A human readable string representing the name of the radio load balance group. The request of the radio radio load balance group name string in detail as follo… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.2 | ColumnhwLBGroupMode | read-create | current | An object to set the load balance mode of radio load balance group. Session means it adjust the radio load balance on the basis of the user numbers, traffic me… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.3 | ColumnhwLBGapThreshold | read-create | current | When connected use number or traffic gap overreach the threshold, the balance will be effected. The units of the load balance group threshold is %, the range i… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.4 | ColumnhwLBAssociateThreshold | read-create | current | When the connection request number of terminal user send to AP reachs the associate threshold in one minute, and connected user number is not reach the max con… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.5 | ColumnhwLBGroupStatus | read-only | current | An object uses to display the load balance group status, It indicates whether the load gap is above the load balance gap threshold. unbalanced means the load b… |
| 1.3.6.1.4.1.2011.6.139.3.5.1.6 | ColumnhwLBGroupRowStatus | read-create | current | Huawei radio load balance group rowstatus is used to create or delete a radio load balance group. |
| 1.3.6.1.4.1.2011.6.139.3.6 | TablehwRadioLoadBalanceGroupMemberTable | not-accessible | current | Huawei Radio Load Banlance Group Member Table, it describes members which is added to the Radio Load Banlance Group. The content of the table contains: load ba… |
| 1.3.6.1.4.1.2011.6.139.3.6.1 | RowhwRadioLoadBalanceGroupMemberEntry | not-accessible | current | Huawei Radio Load Banlance Group Member table entry. The entry of the huawei radio Load Banlance Group Member table, all the nodes of the huawei radio Load Ban… |
| 1.3.6.1.4.1.2011.6.139.3.6.1.1 | ColumnhwLBMemberRadioChannel | read-only | current | An object uses to display the working channel which is currently used by the load balance member radio. Notes the radio working channel of the load balance mem… |
| 1.3.6.1.4.1.2011.6.139.3.6.1.2 | ColumnhwLBMemberRadioPowerLevel | read-only | current | An object uses to display the working power level which is currently used by this radio. Notes the radio working power level just can be display,but can't be c… |
| 1.3.6.1.4.1.2011.6.139.3.6.1.3 | ColumnhwLBMemberRadioPower | read-only | current | An object uses to display the power which is currently used by this radio. Notes the radio power just can be display,but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.6.1.4 | ColumnhwLBMemberRadioSeesionNum | read-only | current | An object uses to display the connected user number which is currently used by this radio. Notes the radio connected user number just can be display,but can't … |
| 1.3.6.1.4.1.2011.6.139.3.6.1.5 | ColumnhwLBMemberRadioTraffic | read-only | current | An object uses to display the traffic which is currently used by this radio. Notes the radio traffic just can be display,but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.6.1.6 | ColumnhwLBMemberRowStatus | read-create | current | Huawei Radio Load Banlance Group Member rowstatus is used to create or delete a Radio Load Banlance Group Member. |
| 1.3.6.1.4.1.2011.6.139.3.7 | TablehwRadioUncontrolAPInfTable | not-accessible | current | Huawei radio uncontrol ap information table,it describes the information about ap which is not authorized by AC. it is aggregate of a group of display to the u… |
| 1.3.6.1.4.1.2011.6.139.3.7.1 | RowhwRadioUncontrolAPInfEntry | not-accessible | current | Huawei radio uncontrol ap information table entry. The entry of the huawei radio uncontrol ap information table, all the nodes of the huawei radio uncontrol ap… |
| 1.3.6.1.4.1.2011.6.139.3.7.1.1 | ColumnhwUncontrolAPIndex | not-accessible | current | An object uses to display the index of the uncontrol ap. Notes the index of the uncontrol ap just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.7.1.2 | ColumnhwUncontrolAPBSSID | read-only | current | An object uses to display the BSSID of uncontrol ap. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base BSSID and Wl… |
| 1.3.6.1.4.1.2011.6.139.3.7.1.3 | ColumnhwAuthAPIndex | read-only | current | An object uses to display the index of the latest authentic ap. Notes the index of the latest authentic ap just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.7.1.4 | ColumnhwUncontrolAPChannel | read-only | current | An object uses to display the working channel which is currently used by the uncontrol ap. Notes the radio working channel of the uncontrol ap just can be disp… |
| 1.3.6.1.4.1.2011.6.139.3.7.1.5 | ColumnhwUncontrolAPRSSI | read-only | current | An object uses to display the the RSSI from uncontrol ap to this radio. RSSI means the signal intensity of the rceived signal. Notes the RSSI from uncontrol ap… |
| 1.3.6.1.4.1.2011.6.139.3.7.1.6 | ColumnhwUncontrolAPSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8 | TablehwRadioPerformanceStatTable | not-accessible | current | Huawei radio performance statistic table, it is aggregate of a group of operation to the performance statistic of radio calibrate counters. Such as display and… |
| 1.3.6.1.4.1.2011.6.139.3.8.1 | RowhwRadioPerformanceStatEntry | not-accessible | current | Huawei radio performance statistic table entry. The entry of the huawei radio performance statistic table, all the nodes of the huawei radio performance statis… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.1 | ColumnhwRadioRcvFrames | read-only | current | An object uses to display the counter of wireless received frames. Notes the counter of wireless received frames just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.2 | ColumnhwRadioRcvBytes | read-only | current | An object uses to display the counter of wireless received bytes. Notes the counter of wireless received bytes just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.3 | ColumnhwRadioSendFrames | read-only | current | An object uses to display the counter of wireless transmitted frames. Notes the counter of wireless transmitted frames just can be display, but can't be config… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.4 | ColumnhwRadioSendBytes | read-only | current | An object uses to display the counter of wireless transmitted bytes. Notes the counter of wireless transmitted bytes just can be display, but can't be configur… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.5 | ColumnhwRadioSendRtsSuccess | read-only | current | An object uses to display the counter of wireless transmitted RTS successes. Notes the counter of wireless transmitted RTS successes just can be display, but c… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.6 | ColumnhwRadioSendUnicast | read-only | current | An object uses to display the counter of wireless transmitted unicast frames. Notes the counter of wireless transmitted unicast frames just can be display, but… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.7 | ColumnhwRadioSendBroadcast | read-only | current | An object uses to display the counter of wireless transmitted broadcast frames. Notes the counter of wireless transmitted broadcast frames just can be display,… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.8 | ColumnhwRadioSendFailFrames | read-only | current | An object uses to display the counter of wireless transmitted failure frames. Notes the counter of wireless transmitted failure frames just can be display, but… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.9 | ColumnhwRadioRcvErrFrames | read-only | current | An object uses to display the counter of wireless received error frames. Notes the counter of wireless received error frames just can be display, but can't be … |
| 1.3.6.1.4.1.2011.6.139.3.8.1.10 | ColumnhwRadioRcvPhyErrFrames | read-only | current | An object uses to display the counter of wireless received physical layer frames. Notes the counter of wireless received physical layer frames just can be disp… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.11 | ColumnhwRadioRcvCrcErrFrames | read-only | current | An object uses to display the counter of received CRC error frames. CRC means the circulative redundancy code, CRC error frame is one of the FCS error frames. … |
| 1.3.6.1.4.1.2011.6.139.3.8.1.12 | ColumnhwRadioRcvMicErrFrames | read-only | current | An object uses to display the counter of wireless received MIC error frames. Notes the counter of wireless received MIC error frames just can be display, but c… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.13 | ColumnhwRadioRcvKeyDecryptErrFrames | read-only | current | An object uses to display the counter of wireless received private key and decrypt fail frames. Notes the counter of wireless received private key and decrypt … |
| 1.3.6.1.4.1.2011.6.139.3.8.1.14 | ColumnhwRadioRetryFrames | read-only | current | An object uses to display the counter of wireless retry frames. Notes the counter of wireless retry frames just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.15 | ColumnhwRadioPER | read-only | current | An object uses to display the wireless PER(packet error rate. Notes the wireless PER(packet error rate just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.16 | ColumnhwRadioChUtilizationRate | read-only | current | An object uses to display the wireless channel utilization of the radio. Notes the wireless channel utilization of the radio just can be display, but can't be … |
| 1.3.6.1.4.1.2011.6.139.3.8.1.17 | ColumnhwRadioPerformanceStatOperMode | read-write | current | An object uses to set the radio performance statisics operation mode. Invalid means the operation is invalid, clear-statistic means it clear the radio performa… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.18 | ColumnhwRadioPEROfLastPeriod | read-only | current | An object uses to display the wireless error rate of the last statistic period. Notes the wireless error rate of the last statistic period just can be display,… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.19 | ColumnhwRadioRcvSignalStrength | read-only | current | An object uses to display the wireless received signal strength. Notes the wireless received signal strength just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.20 | ColumnhwRadioDownMacErrFrames | read-only | obsolete | An object uses to display the counter of wireless down-stream MAC error frames. Notes the counter of wireless down-stream MAC error frames just can be display,… |
| 1.3.6.1.4.1.2011.6.139.3.8.1.21 | ColumnhwRadioRcvPower | read-only | current | An object uses to display the receive power of the radio. Notes the receive power of the radio just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.22 | ColumnhwRadioRcvUnicastFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.23 | ColumnhwRadioRcvMngFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.24 | ColumnhwRadioRcvCtrlFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.25 | ColumnhwRadioRcvDataFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.26 | ColumnhwRadioSendMngFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.27 | ColumnhwRadioSendCtrlFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.28 | ColumnhwRadioSendDataFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.29 | ColumnhwRadioStaMaxSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.30 | ColumnhwRadioStaMinSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.31 | ColumnhwRadioStaAvgSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.32 | ColumnhwRadioSendRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.33 | ColumnhwRadioRecvRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.34 | ColumnhwRadioDropRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.35 | ColumnhwRadioAirPortDhcpFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.36 | ColumnhwRadioAirPortEapolFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.37 | ColumnhwRadioAirPortPsPollFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.38 | ColumnhwRadioAssocRequestFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.39 | ColumnhwRadioAssocResponseFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.40 | ColumnhwRadioReassocRequestFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.41 | ColumnhwRadioReassocResponseFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.42 | ColumnhwRadioDisassocFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.43 | ColumnhwRadioDisauthFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.44 | ColumnhwRadioRcvFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.45 | ColumnhwRadioRcvBytes64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.46 | ColumnhwRadioSendFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.47 | ColumnhwRadioSendBytes64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.48 | ColumnhwRadioSendRtsSuccess64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.49 | ColumnhwRadioSendUnicast64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.50 | ColumnhwRadioSendBroadcast64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.51 | ColumnhwRadioSendFailFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.52 | ColumnhwRadioRcvErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.53 | ColumnhwRadioRcvPhyErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.54 | ColumnhwRadioRcvCrcErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.55 | ColumnhwRadioRcvMicErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.56 | ColumnhwRadioRcvKeyDecryptErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.57 | ColumnhwRadioRetryFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.58 | ColumnhwRadioDownMacErrFrames64Bits | read-only | obsolete | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.59 | ColumnhwRadioNoise | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.60 | ColumnhwRadioActualBandwidth | read-only | current | It means actual bandwidth, include all of both the sent rate and the received rate. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.61 | ColumnhwRadioFrames | read-only | current | It means all of both the sent frames and the received frames. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.62 | ColumnhwRadioSendDropFrames64Bits | read-only | current | It means the sent and dropped frames. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.63 | ColumnhwRadioRcvDropFrames64Bits | read-only | current | It means the received and droped frames. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.64 | ColumnhwRadioChannelFreeRate | read-only | current | It means the rate of free channel. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.65 | ColumnhwRadioTxRate | read-only | current | It means the utilization rate of sending packets. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.66 | ColumnhwRadioRxRate | read-only | current | It means the utilization rate of receiving packets. |
| 1.3.6.1.4.1.2011.6.139.3.8.1.67 | ColumnhwRadioChInterferenceRate | read-only | current | It means the rate of channel interference. |
| 1.3.6.1.4.1.2011.6.139.3.9 | TablehwRadioUnauthenticNeighborInfoTable | not-accessible | current | Huawei radio unauthentic neighbor information table, it describes the information about the neighbor ap which is not authorized by AC. it is aggregate of a gro… |
| 1.3.6.1.4.1.2011.6.139.3.9.1 | RowhwRadioUnauthenticNeighborInfoEntry | not-accessible | current | Huawei radio unauthentic neighbor information table entry. The entry of the huawei radio unauthentic neighbor information table, all the nodes of the huawei ra… |
| 1.3.6.1.4.1.2011.6.139.3.9.1.1 | ColumnhwUnauthenticRadioNeighborBSSID | read-only | current | An object uses to display the BSSID of unauthentic neighbor ap. BSSID identifies a minimum service set,When administrator binds a ESS to a radio, it use base B… |
| 1.3.6.1.4.1.2011.6.139.3.9.1.2 | ColumnhwUnauthenticRadioNeighborRSSI | read-only | current | An object uses to display the the RSSI from unauthentic neighbor ap to this radio. RSSI means the signal intensity of the rceived signal. Notes the RSSI from u… |
| 1.3.6.1.4.1.2011.6.139.3.9.1.3 | ColumnhwunauthenticRadioNeighborChannel | read-only | current | An object uses to display the working channel which is currently used by the unauthentic neighbor ap. Notes the radio working channel of the unauthentic neighb… |
| 1.3.6.1.4.1.2011.6.139.3.9.1.4 | ColumnhwUnauthenticRadioNeighborSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.10 | TablehwRadioRegionCalibrateTable | not-accessible | current | Huawei global calibrate config table, the global calibrate is based on AP region.Huawei radio manage table. The content of the table contains: region calibrate… |
| 1.3.6.1.4.1.2011.6.139.3.10.1 | RowhwRadioRegionCalibrateEntry | not-accessible | current | Huawei radio global calibrate config table entry. The entry of the huawei radio global calibrate config table, all the nodes of the huawei radio global calibra… |
| 1.3.6.1.4.1.2011.6.139.3.10.1.1 | ColumnhwRegionCalibrateStartupMode | read-write | current | The mode uses to set the golbal calibrate startup mode.Immediate means startup immediately. Here, hwRegionCalibrateAutoTime is meanningless. Periodic means sta… |
| 1.3.6.1.4.1.2011.6.139.3.10.1.2 | ColumnhwRegionCalibrateAutoTime | read-write | current | An object uses to set the time when startup everyday on the basic of the periodic calibrate startup mode. Please refer to the description of hwRegionCalibrateS… |
| 1.3.6.1.4.1.2011.6.139.3.10.1.3 | ColumnhwRegionCalibrateListenMode | read-write | current | A switch flag, which set the radio region calibrate listen mode as enable or disable, tells whether the listen unauthentic neighbor while calibrating is suppor… |
| 1.3.6.1.4.1.2011.6.139.3.10.1.4 | ColumnhwRegionCalibrateStatus | read-only | current | An object uses to display the status of the global calibrate.running means the global calibrate is running. stop means the global calibrate had over. Notes the… |
| 1.3.6.1.4.1.2011.6.139.3.11 | ScalarhwBatchRadioProfileStartNumber | read-write | current | An object uses to set the start number of the first radio profile in batch operation. The range of the first radio profile start number is from 1 to 512. Notes… |
| 1.3.6.1.4.1.2011.6.139.3.12 | ScalarhwBatchRadioProfileNumber | read-write | current | An object uses to set the radio profile number which want to get in batch operation. The range of the radio profile number is from 1 to 128. |
| 1.3.6.1.4.1.2011.6.139.3.13 | ScalarhwBatchRadioProfileReturnNumber | read-only | current | An object uses to display the radio profile number which can get in batch operation. The sum of the batch radio profile start number and the batch radio profil… |
| 1.3.6.1.4.1.2011.6.139.3.14 | ScalarhwBatchRadioProfileName | read-only | current | An object uses to display the names of radio profiles which is in the range of batch radio profile names which are determined by the batch radio profile start … |
| 1.3.6.1.4.1.2011.6.139.3.15 | ScalarhwBatchLoadBalanceGroupStartNumber | read-write | current | An object uses to set the start number of the first load balance group in batch operation. The range of the first load balance group start number is from 1 to … |
| 1.3.6.1.4.1.2011.6.139.3.16 | ScalarhwBatchLoadBalanceGroupNumber | read-write | current | An object uses to set the load balance group number which want to get in batch operation. The range of the load balance group number is from 1 to 4096. |
| 1.3.6.1.4.1.2011.6.139.3.17 | ScalarhwBatchLoadBalanceGroupReturnNumber | read-only | current | An object uses to display the load balance group number which can get in batch operation. The sum of the batch load balance group start number and the batch lo… |
| 1.3.6.1.4.1.2011.6.139.3.18 | ScalarhwBatchLoadBalanceGroupName | read-only | current | An object uses to display the names of load balance group which is in the range of batch load balance group names which are determined by the batch load balanc… |
| 1.3.6.1.4.1.2011.6.139.3.19 | ScalarhwBatchUncontrolAPStartNumber | read-write | current | An object uses to set the start number of the first uncontrol AP in batch operation. The range of the first uncontrol AP start number is from 1 to 512. Notes t… |
| 1.3.6.1.4.1.2011.6.139.3.20 | ScalarhwBatchUncontrolAPNumber | read-write | current | An object uses to set the uncontrol AP number which want to get in batch operation. The range of the uncontrol AP start number is from 1 to 512. |
| 1.3.6.1.4.1.2011.6.139.3.21 | ScalarhwBatchUncontrolAPReturnNumber | read-only | current | An object uses to display the uncontrol AP number which can get in batch operation. The sum of the batch uncontrol AP start number and the batch uncontrol AP n… |
| 1.3.6.1.4.1.2011.6.139.3.22 | ScalarhwBatchUncontrolAPBssid | read-only | current | An object uses to display the the BSSID of uncontrol AP which is in the range of batch uncontrol AP BSSID which are determined by the batch uncontrol AP start … |
| 1.3.6.1.4.1.2011.6.139.3.23 | ScalarhwBatchUncontrolAPAuthNeighborIndex | read-only | current | An object uses to display the authentic neighbor ap index of uncontrol ap which is in the range of batch uncontrol ap which are determined by the batch uncontr… |
| 1.3.6.1.4.1.2011.6.139.3.24 | NodehwRadioNotifications | |||
| 1.3.6.1.4.1.2011.6.139.3.24.1 | NodehwRadioNotify | |||
| 1.3.6.1.4.1.2011.6.139.3.24.1.1 | NotificationhwRadioChannelChangedNotify | current | A notification which is sent out when actual channel of radio is changed. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.2 | NotificationhwRadioSignalEnvDeteriorationNotify | current | A notification which is sent out when radio report singal environment deterioration. The objects included with the Notification may be used to read further inf… | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.3 | NotificationhwRadioSignalEnvResumeNotify | current | A notification which is sent out when radio report singal environment resume. The objects included with the Notification may be used to read further informatio… | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.4 | NotificationhwApMonitorModeChangedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.5 | NotificationhwAPCoInterfDetectedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.6 | NotificationhwAPCoInterfClearNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.7 | NotificationhwNerborInterfDetectedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.8 | NotificationhwNeiborInterfClearNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.9 | NotificationhwStaInterfDetectedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.10 | NotificationhwStaInterfClearNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.11 | NotificationhwOtherDeviceInterfDetectedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.12 | NotificationhwOtherDeviceInterfClearNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.13 | NotificationhwRadioDownNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.14 | NotificationhwRadioDownRecovNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.15 | NotificationhwWIDSDetectRogueNotify | current | A notification which is sent out when a rogue device is found. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.16 | NotificationhwRadioNotSupportChannelNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.17 | NotificationhwRadioNotSupportPowerLevelNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.18 | NotificationhwRadioAntennaGainIsUnlawfulNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.19 | NotificationhwRadioPowerChangedNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.20 | NotificationhwApAccessUserNumExceedThresholdNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.21 | NotificationhwApAccessUserNumExceedThresholdRecovNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.22 | NotificationhwApRoamUserNumExceedThresholdNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.23 | NotificationhwApRoamUserNumExceedThresholdRecovNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.24 | NotificationhwApAccessChannelUtilExceedThresholdNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.25 | NotificationhwApAccessChannelUtilExceedThresholdRecovNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.26 | NotificationhwApRoamChannelUtilExceedThresholdNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.27 | NotificationhwApRoamChannelUtilExceedThresholdRecovNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.1.28 | NotificationhwRadioUploadRemoteCaptureFileNotify | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.24.3 | NodehwRadioNotifyObjects | |||
| 1.3.6.1.4.1.2011.6.139.3.24.3.1 | ScalarhwRadioActualChannel | read-only | current | An object uses to display the actual working channel which is currently used by the radio. Notes the radio actual working channel just can be display, but can'… |
| 1.3.6.1.4.1.2011.6.139.3.24.3.2 | ScalarhwRadioConflictRate | read-only | current | An object uses to display the wireless conflict rate of the radio. Notes the wireless conflict rate of the radio just can be display, but can't be configured. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.3 | ScalarhwApMonitorMode | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.4 | ScalarhwApPreMonitorMode | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.5 | ScalarhwApChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.6 | ScalarhwApInterfBssid | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.7 | ScalarhwInterfStaMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.8 | ScalarhwRadioDownCause | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.9 | ScalarhwInterfApChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.10 | ScalarhwInterfRSSI | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.11 | ScalarhwWIDSTrapInfoAPID | read-only | current | The ID of AP that is monitoring. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.12 | ScalarhwWIDSTrapInfoRadioId | read-only | current | The Radio ID of AP that is monitoring. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.13 | ScalarhwWIDSTrapInfoAPMAC | read-only | current | The MAC address of AP that is monitoring. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.14 | ScalarhwWIDSTrapInfoRogueMAC | read-only | current | The MAC address of the rogue device that is monitored. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.15 | ScalarhwWIDSTrapInfoRogueSSId | read-only | current | The SSID of the rogue device that is monitored. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.16 | ScalarhwWIDSTrapInfoRogueType | read-only | current | The type of the rogue device that is monitored(1 stands for a rogue AP). |
| 1.3.6.1.4.1.2011.6.139.3.24.3.17 | ScalarhwWIDSTrapInfoRogueRSSI | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.18 | ScalarhwWIDSTrapInfoRogueChanID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.19 | ScalarhwRadioActualChannelBandwidth | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.20 | ScalarhwRadioActualPowerLevel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.21 | ScalarhwRadioActualAntennaGain | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.22 | ScalarhwRadioLegitimateAntennaGain | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.23 | ScalarhwRadioChannelChangedReason | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.24 | ScalarhwRadioChannelChangedReasonStr | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.25 | ScalarhwRadioDownCauseStr | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.26 | ScalarhwRadioUacUserNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.27 | ScalarhwRadioPreActualChannel | read-only | current | Actual channel before being changed. Used in channel change alarm. |
| 1.3.6.1.4.1.2011.6.139.3.24.3.28 | ScalarhwRadioPowerChangedReasonStr | read-only | current | Radio power change reason. |
| 1.3.6.1.4.1.2011.6.139.3.25 | TablehwRadioParaStatisticTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.25.1 | RowhwRadioParaStatisticEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.25.1.1 | ColumnhwRadioStaAveSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26 | TablehwMacRadioManageTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1 | RowhwMacRadioManageEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.1 | ColumnhwMacRadioID | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.2 | ColumnhwMacRadioMngBaseBssID | read-only | current | You can get an effective baseBssID ,only when wlan 1 is created. Or you will get a noneffective value. BSSID identifies a minimum service set,When administrato… |
| 1.3.6.1.4.1.2011.6.139.3.26.1.3 | ColumnhwMacRadioMngRadioProfileName | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.4 | ColumnhwMacRadioMngState | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.5 | ColumnhwMacRadioMngChannel | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.6 | ColumnhwMacRadioMngPowerLevel | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.7 | ColumnhwMacRadioMngPower | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.8 | ColumnhwMacRadioAvailableSntennaNumber | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.9 | ColumnhwMacRadioWorkingChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.10 | ColumnhwMacRadioWorkingPowerLevel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.11 | ColumnhwMacRadioWorkingPower | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.12 | ColumnhwMacRadioMngChannelBandwidth | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.13 | ColumnhwMacRadioWorkingChannelBandwidth | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.14 | ColumnhwMacRadio80211nMCSValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.15 | ColumnhwMacRadioWidsWorkMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.16 | ColumnhwMacRadioMngBinded | read-write | current | Object selects a mechanism for bind/unbind the radio-profile |
| 1.3.6.1.4.1.2011.6.139.3.26.1.18 | ColumnhwMacRadioMaxTxPwrLvl | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.19 | ColumnhwMacRadioPwrAttRange | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.20 | ColumnhwMacRadioPwrAttValue | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.21 | ColumnhwMacRadioAntennaGain | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.22 | ColumnhwMacRadioBridgeWhitelistEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.23 | ColumnhwMacRadioBridgeWhitelistName | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.24 | ColumnhwMacRadioBridgeStpSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.25 | ColumnhwMacRadioBridgeSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.26 | ColumnhwMacRadioBridgeMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.27 | ColumnhwMacRadioUndoBridgeWhitelist | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.28 | ColumnhwMacRadioUserTrafficScheduler | read-write | obsolete | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.29 | ColumnhwMacRadioCountermeasuresMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.30 | ColumnhwMacRadioFrequency | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.31 | ColumnhwMacRadioCountermeasuresSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.32 | ColumnhwMacRadioSpectrumAnalysisEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.33 | ColumnhwMACRadioWidsAttackDetEnable | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.34 | ColumnhwMacRadioMeshWhitelistName | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.35 | ColumnhwMacUndoMeshWhitelist | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.36 | ColumnhwMacRadioMeshRole | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.37 | ColumnhwMacRadioLocationEnable | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.2011.6.139.3.26.1.38 | ColumnhwMacRadioLocationScanChannelEnable | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.2011.6.139.3.26.1.39 | ColumnhwMacRadio80211nMulticastMCSValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.40 | ColumnhwMacRadioSpectrogramServerReportEnable | read-write | current | 0: disable 1: enable |
| 1.3.6.1.4.1.2011.6.139.3.26.1.41 | ColumnhwMacRadioMulticastRateValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.42 | ColumnhwMacRadio11acSpatialStream | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.43 | ColumnhwMacRadio11acMCSValue | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.26.1.44 | ColumnhwMacRadioActiveSwitch | read-write | current | Mesh handover feature: Fat AP receive dormancy or active signal through snmp. When the signal is active, radio of fat ap is enable and send RARP packet; When t… |
| 1.3.6.1.4.1.2011.6.139.3.27 | TablehwMacRadioCalibrateStatisicsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.27.1 | RowhwMacRadioCalibrateStatisicsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.27.1.1 | ColumnhwMacRadioCalStatisSignalBadCount | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.27.1.2 | ColumnhwMacRadioCalStatisCalibratePowerCount | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.27.1.3 | ColumnhwMacRadioCalStatisCalibrateChannelCount | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.27.1.4 | ColumnhwMacRadioCalibrateStatisicsOperMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28 | TablehwMacRadioAuthNeighborInfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1 | RowhwMacRadioAuthNeighborInfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.1 | ColumnhwMacAuthenticRadioNeighborAPID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.2 | ColumnhwMacAuthenticRadioNeighborChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.3 | ColumnhwMacAuthenticRadioNeighborFrontAttenu | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.4 | ColumnhwMacAuthenticRadioNeighborBackAttenu | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.5 | ColumnhwMacAuthenticRadioNeighborAPMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.28.1.6 | ColumnhwMacAuthenticRadioNeighborSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29 | TablehwMacRadioLoadBalanceGroupMemberTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1 | RowhwMacRadioLoadBalanceGroupMemberEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.1 | ColumnhwMacLBMemberRadioChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.2 | ColumnhwMacLBMemberRadioPowerLevel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.3 | ColumnhwMacLBMemberRadioPower | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.4 | ColumnhwMacLBMemberRadioSeesionNum | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.5 | ColumnhwMacLBMemberRadioTraffic | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.29.1.6 | ColumnhwMacLBMemberRowStatus | read-create | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30 | TablehwMacRadioPerformanceStatTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1 | RowhwMacRadioPerformanceStatEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.1 | ColumnhwMacRadioRcvFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.2 | ColumnhwMacRadioRcvBytes | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.3 | ColumnhwMacRadioSendFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.4 | ColumnhwMacRadioSendBytes | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.5 | ColumnhwMacRadioSendRtsSuccess | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.6 | ColumnhwMacRadioSendUnicast | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.7 | ColumnhwMacRadioSendBroadcast | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.8 | ColumnhwMacRadioSendFailFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.9 | ColumnhwMacRadioRcvErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.10 | ColumnhwMacRadioRcvPhyErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.11 | ColumnhwMacRadioRcvCrcErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.12 | ColumnhwMacRadioRcvMicErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.13 | ColumnhwMacRadioRcvKeyDecryptErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.14 | ColumnhwMacRadioRetryFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.15 | ColumnhwMacRadioPER | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.16 | ColumnhwMacRadioChUtilizationRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.17 | ColumnhwMacRadioPerformanceStatOperMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.18 | ColumnhwMacRadioPEROfLastPeriod | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.19 | ColumnhwMacRadioRcvSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.20 | ColumnhwMacRadioDownMacErrFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.21 | ColumnhwMacRadioRcvPower | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.22 | ColumnhwMacRadioRcvUnicastFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.23 | ColumnhwMacRadioRcvMngFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.24 | ColumnhwMacRadioRcvCtrlFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.25 | ColumnhwMacRadioRcvDataFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.26 | ColumnhwMacRadioSendMngFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.27 | ColumnhwMacRadioSendCtrlFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.28 | ColumnhwMacRadioSendDataFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.29 | ColumnhwMacRadioStaMaxSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.30 | ColumnhwMacRadioStaMinSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.31 | ColumnhwMacRadioStaAvgSignalStrength | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.32 | ColumnhwMacRadioSendRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.33 | ColumnhwMacRadioRecvRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.34 | ColumnhwMacRadioDropRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.35 | ColumnhwMacRadioAirPortDhcpFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.36 | ColumnhwMacRadioAirPortEapolFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.37 | ColumnhwMacRadioAirPortPsPollFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.38 | ColumnhwMacRadioAssocRequestFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.39 | ColumnhwMacRadioAssocResponseFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.40 | ColumnhwMacRadioReassocRequestFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.41 | ColumnhwMacRadioReassocResponseFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.42 | ColumnhwMacRadioDisassocFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.43 | ColumnhwMacRadioDisauthFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.44 | ColumnhwMacRadioRcvFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.45 | ColumnhwMacRadioRcvBytes64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.46 | ColumnhwMacRadioSendFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.47 | ColumnhwMacRadioSendBytes64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.48 | ColumnhwMacRadioSendRtsSuccess64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.49 | ColumnhwMacRadioSendUnicast64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.50 | ColumnhwMacRadioSendBroadcast64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.51 | ColumnhwMacRadioSendFailFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.52 | ColumnhwMacRadioRcvErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.53 | ColumnhwMacRadioRcvPhyErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.54 | ColumnhwMacRadioRcvCrcErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.55 | ColumnhwMacRadioRcvMicErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.56 | ColumnhwMacRadioRcvKeyDecryptErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.57 | ColumnhwMacRadioRetryFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.58 | ColumnhwMacRadioDownMacErrFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.59 | ColumnhwMacRadioNoise | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.60 | ColumnhwMacRadioActualBandwidth | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.61 | ColumnhwMacRadioFrames | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.62 | ColumnhwMacRadioSendDropFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.63 | ColumnhwMacRadioRcvDropFrames64Bits | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.64 | ColumnhwMacRadioChannelFreeRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.65 | ColumnhwMacRadioTxRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.66 | ColumnhwMacRadioRxRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.30.1.67 | ColumnhwMacRadioChInterferenceRate | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31 | TablehwMacRadioUnauthenticNeighborInfoTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31.1 | RowhwMacRadioUnauthenticNeighborInfoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31.1.1 | ColumnhwMacUnauthenticRadioNeighborBSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31.1.2 | ColumnhwMacUnauthenticRadioNeighborRSSI | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31.1.3 | ColumnhwMacunauthenticRadioNeighborChannel | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.31.1.4 | ColumnhwMacUnauthenticRadioNeighborSSID | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32 | TablehwRadioInfoTable | not-accessible | current | Huawei radio wireless port information table. . |
| 1.3.6.1.4.1.2011.6.139.3.32.1 | RowhwRadioInfoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.1 | ColumnhwRadioDecsption | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.2 | ColumnhwRadioPortType | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.3 | ColumnhwRadioMaxMtu | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.4 | ColumnhwRadioBandwidth | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.5 | ColumnhwRadioMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.6 | ColumnhwRadioAdminStatus | read-write | current | The admin status only can be 1 or 2. 1 stands for up, and 2 stands for admindown. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.7 | ColumnhwRadioOperStatus | read-only | current | The current status only can be 1, 2 or 3. 1 stands for up, 2 stands for down, and 3 stands for admindown. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.8 | ColumnhwRadioLastChange | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.9 | ColumnhwRadioInfoUpDownTimes | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.10 | ColumnhwRadioAutoOffSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.11 | ColumnhwRadioAutoOffStartTime | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.32.1.12 | ColumnhwRadioAutoOffEndTime | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33 | TablehwMacRadioInfoTable | not-accessible | current | Huawei radio wireless port information table. |
| 1.3.6.1.4.1.2011.6.139.3.33.1 | RowhwMacRadioInfoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.1 | ColumnhwMacRadioDecsption | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.2 | ColumnhwMacRadioPortType | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.3 | ColumnhwMacRadioMaxMtu | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.4 | ColumnhwMacRadioBandwidth | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.5 | ColumnhwMacRadioMac | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.6 | ColumnhwMacRadioAdminStatus | read-write | current | The admin status only can be 0 or 1. 0 stands for up, and 1 stands for admindown.. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.7 | ColumnhwMacRadioOperStatus | read-only | current | The current status only can be 0, 1 or 2. 0 stands for up, 1 stands for down, and 2 stands for admindown.. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.8 | ColumnhwMacRadioLastChange | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.9 | ColumnhwMacRadioInfoUpDownTimes | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.10 | ColumnhwMacRadioAutoOffSwitch | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.11 | ColumnhwMacRadioAutoOffStartTime | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.33.1.12 | ColumnhwMacRadioAutoOffEndTime | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34 | NodehwRadioObjects | |||
| 1.3.6.1.4.1.2011.6.139.3.34.1 | NodehwRadioCalibrateTable | |||
| 1.3.6.1.4.1.2011.6.139.3.34.1.1 | ScalarhwRadioCalibrateMode | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.2 | ScalarhwRadioCalibrateTime | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.3 | ScalarhwRadioCalibrateManualStartup | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.4 | ScalarhwRadioCalibrateCycle | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.5 | ScalarhwRadioCalibratePolicy | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.6 | ScalarhwRadioCalibratesensitivity | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.7 | ScalarhwRadioGlobalCalibrateChannel2G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.8 | ScalarhwRadioGlobalCalibrateChannel5G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.9 | ScalarhwRadioGlobalScanChannel2G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.10 | ScalarhwRadioGlobalScanChannel5G | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.11 | ScalarhwRadioGlobalCalibrate5gBandWidth | read-write | current | Global calibrate 5G band width. |
| 1.3.6.1.4.1.2011.6.139.3.34.1.12 | ScalarhwRadioCalibrateAutoStartTime | read-write | current | Auto calibrate start time. |
| 1.3.6.1.4.1.2011.6.139.3.34.2 | TablehwConnectProfileTable | not-accessible | current | Huawei connect profile table. This table is used to create connect profile and config the element in this profile.The element include as fllows: - huawei conne… |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1 | RowhwConnectProfileEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.1 | ColumnhwConnectProfileName | not-accessible | current | An object is uesd to set connect profile name,if access to connect profile must through this name only. Generally,it can set 32 connect profiles and the name n… |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.2 | ColumnhwConnectSsid | read-write | current | The string of ssid has no more than 32 character. |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.3 | ColumnhwConnectPeerMac | read-write | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.4 | ColumnhwConnectPskPassPhase | read-write | current | An object is used to set psk for safe connect. The encrpytion tachniques only sustain wpa2-ccmp. The psk maybe 32 to 104 cryptograph character or 8 to 63 collo… |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.5 | ColumnhwConnectProfileActived | read-write | current | An object is used to display and set connect profile's status. 0 show not connected,1 show connecting. |
| 1.3.6.1.4.1.2011.6.139.3.34.2.1.6 | ColumnhwConnectProfileRowStatus | read-write | current | An object is used to create or delete a connect profile. There are some restrictions of operation of the connect profile. - It needs a connect profile name for… |
| 1.3.6.1.4.1.2011.6.139.3.34.3 | TablehwRadioBasicSettingTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.3.1 | RowhwRadioBasicSettingEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.3.1.1 | ColumnhwApRadioID | not-accessible | current | The index of radio parameter. |
| 1.3.6.1.4.1.2011.6.139.3.34.3.1.2 | ColumnhwApRadioTxPower | read-write | current | An object is used to set transmittion power for wireless. The range is from 16 to 36. if not setting,the txpower is max power which the device hold. |
| 1.3.6.1.4.1.2011.6.139.3.34.3.1.3 | ColumnhwApRadioRtsThreshold | read-write | current | |
| 1.3.6.1.4.1.2011.6.139.3.34.4 | TablehwConnectStatusTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1 | RowhwConnectStatusEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.1 | ColumnhwConnectStatusPeerMac | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.2 | ColumnhwConnectStatusSsid | read-only | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.3 | ColumnhwConnectStatus | read-only | current | An object is used to display connect status now. 1 shows connection, 2 shows disconnection. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.4 | ColumnhwConnectStatusSNR | read-only | current | An object is used to display the snr of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.5 | ColumnhwConnectStatusNoiseFloor | read-only | current | An object is used to display the noise of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.6 | ColumnhwConnectStatusChannel | read-only | current | An object is used to display the channel of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.7 | ColumnhwConnectStatusActualTxPower | read-only | current | An object is used to display the actual tx power of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.8 | ColumnhwConnectStatusBeaconInterval | read-only | current | An object is used to display the beacon interval of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.9 | ColumnhwConnectStatusCurrentRate | read-only | current | An object is used to display the rate of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.10 | ColumnhwConnectStatusTxBeamforming | read-only | current | An object is used to display the tx beam forming of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.11 | ColumnhwConnectStatusActualCountryCode | read-only | current | An object is used to display the current countrycode of current device. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.12 | ColumnhwConnectStatusDistance | read-only | current | An object is used to get the distance setting for the connection. The unit is 0.1 km. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.13 | ColumnhwConnectStatusCurrentRateKbps | read-only | current | An object is used to display the rate of current link, the unit is Kbps. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.14 | ColumnhwConnectStatusHtMode | read-only | current | An object is used to display the HT mode of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.4.1.15 | ColumnhwConnectStatusGIMode | read-only | current | An object is used to display the GI mode of current link. |
| 1.3.6.1.4.1.2011.6.139.3.34.5 | TablehwConnectStatisticsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1 | RowhwConnectStatisticsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.1 | ColumnhwConnectStatisticsPeerMac | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.2 | ColumnhwConnectRxOkUcastDataFrames | read-only | current | An object is used to display the count of correct unicast Rx message. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.3 | ColumnhwConnectRxOkUcastDataBytes | read-only | current | An object is used to display the bytes count of correct unicast Rx message. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.4 | ColumnhwConnectTxOkUcastDataFrames | read-only | current | An object is used to display the count of correct unicast Tx message. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.5 | ColumnhwConnectTxOkUcastDataBytes | read-only | current | An object is used to display the bytes count of correct unicast Tx message. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.6 | ColumnhwConnectRxThroughput | read-only | current | An object is used to display the rate of Rx message.The unit is Mbps. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.7 | ColumnhwConnectTxThroughput | read-only | current | An object is used to display the rate of Tx message.The unit is Mbps. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.8 | ColumnhwConnectRxErrFrames | read-only | current | An object is used to display the count of Rx message which is wrong. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.9 | ColumnhwConnectTxErrUcastDataFrames | read-only | current | An object is used to display the count of Tx message which is wrong. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.10 | ColumnhwConnectUcastDataFrameTxRetryRatio | read-only | current | An object is used to display the repeate message rate of unicast Tx message.The range id from 0 to 100. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.11 | ColumnhwConnectOnlineTime | read-only | current | An object is used to display the connection time length which connected last time. |
| 1.3.6.1.4.1.2011.6.139.3.34.5.1.12 | ColumnhwConnectStatisticsReset | read-write | current | An object is used to reset the statistics datas of current device. |
| 1.3.6.1.4.1.2011.6.139.3.34.6 | TablehwConnectRateHistogramTable | not-accessible | current | Huawei connect rate histogram table. This table is uses to display connect rate histogram.The content of the table contains:connect rate histogram TxRx,connect… |
| 1.3.6.1.4.1.2011.6.139.3.34.6.1 | RowhwConnectRateHistogramEntry | not-accessible | current | Huawei connect rate histogram table entry. The index of the connect rate histogram table is hwConnectRateHistogramTxRx and hwconnectRateHistogramRate. |
| 1.3.6.1.4.1.2011.6.139.3.34.6.1.1 | ColumnhwConnectRateStatDirection | not-accessible | current | The first index is connect rate histogram TxRx,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmit r… |
| 1.3.6.1.4.1.2011.6.139.3.34.6.1.2 | ColumnhwConnectRateStatRange | not-accessible | current | The second index is connect rate histogram rate.The range as follows: - MCS0,MCS1,MCS2,MCS3,MCS4,MCS5,MCS6,MCS7,MCS8,MCS9,MCS10,MCS11,MCS12 show 0 to 12 - MCS1… |
| 1.3.6.1.4.1.2011.6.139.3.34.6.1.3 | ColumnhwConnectRateStatUcastDataFrames | read-only | current | An object uses to display connect rate histogram ucast data frames through the connect rate histogram TxRx and the connect rate histogram rate. |
| 1.3.6.1.4.1.2011.6.139.3.34.7 | TablehwConnectAMPDUHistogramTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.7.1 | RowhwConnectAMPDUHistogramEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.7.1.1 | ColumnhwConnectAMPDUStatDirection | not-accessible | current | The first index is connect AMPDU histogram TxRx,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmit … |
| 1.3.6.1.4.1.2011.6.139.3.34.7.1.2 | ColumnhwConnectAMPDUStatRange | not-accessible | current | The range is from 0 to 64.Different number make up different length of AMPDU. For example,32 express the length of AMPDU is 32. |
| 1.3.6.1.4.1.2011.6.139.3.34.7.1.3 | ColumnhwConnectAMPDUStatUcastDataFrames | read-only | current | An object uses to display connect AMPDU ucast data frames through the connect AMPDU stat direction and the connect AMPDU stat range. |
| 1.3.6.1.4.1.2011.6.139.3.34.8 | TablehwConnectLenHistogramTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.8.1 | RowhwConnectLenHistogramEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.8.1.1 | ColumnhwConnectDataLenStatDirection | not-accessible | current | The first index is connect datalen stat direction,the detail ranges as follows: - 1 express Received rate histogram of unicast data frames. - 2 express Transmi… |
| 1.3.6.1.4.1.2011.6.139.3.34.8.1.2 | ColumnhwConnectDataLenStatLength | not-accessible | current | The second index is connect data length.The range as follows: -0 shows 0 to 255 -1 shows 256 to 511 -2 shows 512 to 767 -3 shows 768 to 1023 -4 shows 1024 to 1… |
| 1.3.6.1.4.1.2011.6.139.3.34.8.1.3 | ColumnhwConnectDataLenStatFrameCounts | read-only | current | An object uses to display connect data length stat frame counts through the connect data length dir- ection and the connect data length. |
| 1.3.6.1.4.1.2011.6.139.3.34.9 | TablehwConnectMaxSnrTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1 | RowhwConnectMaxSnrEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1.1 | ColumnhwConnectMaxSnrPeerMAC | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1.2 | ColumnhwConnectMaxSnrValue | read-only | current | An object is used to display max snr value when connection. |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1.3 | ColumnhwConnectMaxSnrNoiseFloor | read-only | current | noise floor |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1.4 | ColumnhwConnectMaxSnrSSID | read-only | current | neighbor ssid |
| 1.3.6.1.4.1.2011.6.139.3.34.9.1.5 | ColumnhwConnectMaxSnrTime | read-only | current | last time |
| 1.3.6.1.4.1.2011.6.139.3.34.10 | TablehwRadioQueryPowerlevelTable | not-accessible | current | Table for query powerlevel of the appointed AP if set channel and bandwidth. |
| 1.3.6.1.4.1.2011.6.139.3.34.10.1 | RowhwRadioQueryPowerlevelEntry | not-accessible | current | Entry for query powerlevel table . |
| 1.3.6.1.4.1.2011.6.139.3.34.10.1.1 | ColumnhwRadioQueryPowerlevelChannel | not-accessible | current | The channel if it will be set as an index. |
| 1.3.6.1.4.1.2011.6.139.3.34.10.1.2 | ColumnhwRadioQueryPowerlevelBandwidth | not-accessible | current | The bandwidth if it will be set as an index. |
| 1.3.6.1.4.1.2011.6.139.3.34.10.1.3 | ColumnhwRadioQueryPowerlevelMax | read-only | current | The result ,it shows the number of powerlevel , which begins from zero. |
| 1.3.6.1.4.1.2011.6.139.3.35 | NodehwRadioConformance | |||
| 1.3.6.1.4.1.2011.6.139.3.35.1 | NodehwRadioCompliances | |||
| 1.3.6.1.4.1.2011.6.139.3.35.1.1 | CompliancehwRadioCompliance | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2 | NodehwRadioObjectGroups | |||
| 1.3.6.1.4.1.2011.6.139.3.35.2.1 | GrouphwRadioProfileGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.2 | GrouphwRadioManageGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.3 | GrouphwRadioCalibrateStatisicsGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.4 | GrouphwRadioAuthNeighborInfGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.5 | GrouphwRadioLoadBalanceGroupGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.6 | GrouphwRadioLoadBalanceGroupMemberGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.7 | GrouphwRadioUncontrolAPInfGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.8 | GrouphwRadioPerformanceStatGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.9 | GrouphwRadioUnauthenticNeighborInfoGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.10 | GrouphwRadioRegionCalibrateGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.11 | GrouphwRadioGlobalGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.12 | GrouphwRadioNotifyGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.13 | GrouphwRadioNotifyObjectGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.14 | GrouphwRadioParaStatisticGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.15 | GrouphwMacRadioManageGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.16 | GrouphwMacRadioCalibrateStatisicsGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.17 | GrouphwMacRadioAuthNeighborInfGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.18 | GrouphwMacRadioLoadBalanceGroupMemberGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.19 | GrouphwMacRadioPerformanceStatGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.20 | GrouphwMacRadioUnauthenticNeighborInfoGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.21 | GrouphwRadioInfoGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.22 | GrouphwMacRadioInfoGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.23 | GrouphwRadioCalibrateGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.24 | GrouphwConnectStatusGroup | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.25 | GrouphwConnectStatisticsGruop | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.26 | GrouphwConnectRateHistogramGruop | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.27 | GrouphwConnectAMPDUHistogramGruop | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.28 | GrouphwConnectLenHistogramGruop | current | Description. | |
| 1.3.6.1.4.1.2011.6.139.3.35.2.29 | GrouphwConnectMaxSnrGruop | current | Description. |