MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-WLAN-SYS-MIB

131 objects

add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service.

Imported Objects

HUAWEI-WLAN-MIB	hwWlan
SNMPv2-CONF	MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI	Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32

OID	Name	Access	Status	Description
1.3.6.1.4.1.2011.6.139.1	IdentityhwWlanSysManagement			add table of hwWlanStaIpv6Switch,and notes for sta ipv6 service.
1.3.6.1.4.1.2011.6.139.1.1	NodehwWlanTrapRestrain
1.3.6.1.4.1.2011.6.139.1.1.1	ScalarhwWlanTrapRestrainAll	read-write	current	All wlan trap restrain switch. If this switch is enabled, all the traps on ac will not be sent.
1.3.6.1.4.1.2011.6.139.1.1.2	NodehwWlanTrapSeverityRestrain
1.3.6.1.4.1.2011.6.139.1.1.2.1	ScalarhwWlanTrapSeverityRestrainSeverity	read-write	current	Wlan trap restrain by severity. critical: means the trap whose severity is not higner than critical will not be sent. major: means the trap whose severity is n…
1.3.6.1.4.1.2011.6.139.1.1.3	NodehwWlanApRegionTrapRestrain
1.3.6.1.4.1.2011.6.139.1.1.3.1	ScalarhwWlanApRegionTrapRestrainRegionIndexMask	read-write	current	Wlan trap restrain by ap region. Every bit is used to describe the region's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each By…
1.3.6.1.4.1.2011.6.139.1.1.4	NodehwWlanApTrapRestrain
1.3.6.1.4.1.2011.6.139.1.1.4.1	ScalarhwWlanApTrapRestrainApIndexMask	read-write	current	Wlan trap restrain by ap. Every bit is used to describe the ap's trap will be restrained or not. 0 means not restrain, and 1 means restrain. Each Byte describe…
1.3.6.1.4.1.2011.6.139.1.2	NodehwWlanSysPara
1.3.6.1.4.1.2011.6.139.1.2.1	ScalarhwWlanCarrierId	read-write	current	The carrier identification. cmcc means 'China mobile communications corporation' , ctc means 'China telecom company' , cuc means 'China unicom company', other …
1.3.6.1.4.1.2011.6.139.1.2.2	ScalarhwWlanAcId	read-write	current	The ac identification. The carrier must set ac id and carrier id before use. In this case, APs can check each other whether blong to a same AC.
1.3.6.1.4.1.2011.6.139.1.2.3	ScalarhwWlanForwardMode	read-write	current	AC forward mode.It can be set ess(1): ess mode ap(2): ap mode
1.3.6.1.4.1.2011.6.139.1.2.4	ScalarhwWlanAcNEnumber	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.5	ScalarhwWlanAcAccessMaxApNumber	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.6	ScalarhwAcCountryCode	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.8	ScalarhwWlanApUsername	read-write	current	Description: When set, need to together with password, and the username length is 4 to 31 characters.
1.3.6.1.4.1.2011.6.139.1.2.9	ScalarhwWlanApPassword	read-write	current	Description: When set, need to together with username, and the password length is 8 to 32 characters which must contain at least one capital letter, one lowcas…
1.3.6.1.4.1.2011.6.139.1.2.10	ScalarhwWlanUsernamePasswordApId	read-write	current	Description: The node is useful only when get the username or password and must be set first and read with username or password. When get the username or passw…
1.3.6.1.4.1.2011.6.139.1.2.11	ScalarhwWlanApLldpSwitch	read-write	current	Description: Global AP LLDP switch.
1.3.6.1.4.1.2011.6.139.1.2.12	ScalarhwWlanAcAccessMaxStaNumber	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.13	ScalarhwWlanAcDtlsSwitch	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.14	ScalarhwWlanAcDtlsPsk	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.15	ScalarhwWlanApLogManualBackupApId	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.16	ScalarhwWlanAcDtlsDefaultPskSwitch	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.17	ScalarhwWlanWorkMode	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.18	ScalarhwWlanIpv6Enable	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.19	ScalarhwWlanInterAcDtlsEncrpyt	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.20	ScalarhwWlanInterAcDtlsPsk	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.2.21	ScalarhwWlanStaIpv6Switch	read-write	current	Whether to process IPv6 services of STAs.
1.3.6.1.4.1.2011.6.139.1.3	NodehwWlanAcSourceInterface
1.3.6.1.4.1.2011.6.139.1.3.1	ScalarhwWlanAcSourceInterfaceValue	read-write	current	the value of wlan ac source interface.
1.3.6.1.4.1.2011.6.139.1.3.2	ScalarhwWlanAcSourceInterfaceMethod	read-write	current	operation method of wlan ac source interface.It can be set default(1): use default setting vlanif(2): use vlanif interface loopback(3): use loopback interface …
1.3.6.1.4.1.2011.6.139.1.3.3	ScalarhwWlanAcSourceIPv4Address	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.4	NodehwWlanBatchQuery
1.3.6.1.4.1.2011.6.139.1.4.1	ScalarhwWlanBatchQueryType	read-write	current	Data type of Batch query. For example, apProfName(1) can be used to get ap-profile-name list. The batch query support two modes, the number mode and the ID lis…
1.3.6.1.4.1.2011.6.139.1.4.2	ScalarhwWlanBatchRequestNum	read-write	current	The request number of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchStartCount. For example, there are 6 a…
1.3.6.1.4.1.2011.6.139.1.4.3	ScalarhwWlanBatchStartCount	read-write	current	The start count of the batch query, it used in number mode. This node must be set in company with the node hwWlanBatchRequestNum. For example, there are 6 ap-p…
1.3.6.1.4.1.2011.6.139.1.4.4	ScalarhwWlanBatchRequestIdList	read-write	current	The ID list of the data type, It used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdSize and hwWlanBatchRequestIdNum. For…
1.3.6.1.4.1.2011.6.139.1.4.5	ScalarhwWlanBatchRequestIdSize	read-write	current	The length of a batch query ID element, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequest…
1.3.6.1.4.1.2011.6.139.1.4.6	ScalarhwWlanBatchRequestIdNum	read-write	current	The number of batch query by id, it used in ID list mode. This node must be set in company with the node hwWlanBatchRequestIdList and hwWlanBatchRequestIdSize.…
1.3.6.1.4.1.2011.6.139.1.4.7	ScalarhwWlanBatchValueList	read-only	current	The returned value list. If the value ended by a string, each value is divided by '?', otherwise , each value will have a fixed length. This node must be get i…
1.3.6.1.4.1.2011.6.139.1.4.8	ScalarhwWlanBatchReturnNum	read-only	current	The number of successful query. This node must be get in company with the node hwWlanBatchValueList.
1.3.6.1.4.1.2011.6.139.1.4.9	ScalarhwWlanBatchTotalNum	read-only	current	Total number of current batch query. For example, There are 10 ap-Profiles in the AC, the value of this node will be 10.
1.3.6.1.4.1.2011.6.139.1.5	NodehwWlanCapwapConfig
1.3.6.1.4.1.2011.6.139.1.5.1	ScalarhwWlanCapwapKeepAliveInterval	read-write	current	The interval of maintain freshness of the CAPWAP channel, in seconds.
1.3.6.1.4.1.2011.6.139.1.5.2	ScalarhwWlanCapwapKeepAliveTimes	read-write	current	The times of maintain freshness of the CAPWAP channel before it timeout.
1.3.6.1.4.1.2011.6.139.1.5.3	ScalarhwWlanCapwapControlPriorityACToAP	read-write	current	the ac's priority value of CAPWAP control packet,includ cos and tos, ranging between 0 and 7.
1.3.6.1.4.1.2011.6.139.1.5.4	ScalarhwWlanCapwapControlPriorityAPToAC	read-write	current	the ap's priority value of CAPWAP control packet,includ tos, ranging between 0 and 7.
1.3.6.1.4.1.2011.6.139.1.6	NodehwWlanAcProtect
1.3.6.1.4.1.2011.6.139.1.6.1	ScalarhwWlanAcProtectIpAddress	read-write	current	IP address of the backup AC.
1.3.6.1.4.1.2011.6.139.1.6.2	ScalarhwWlanAcProtectPriority	read-write	current	Dual-link hot backup priorities.
1.3.6.1.4.1.2011.6.139.1.6.3	ScalarhwWlanAcProtectSwitch	read-write	current	Dual-link hot backup switch.
1.3.6.1.4.1.2011.6.139.1.6.4	ScalarhwWlanAcProtectRestoreSwitch	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.6.5	ScalarhwUndoWlanAcProtectIpAddress	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.6.6	ScalarhwUndoWlanAcProtectPriority	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.6.7	ScalarhwWlanAcProtectIpv6Address	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.7	NodehwWlanConfigChannel
1.3.6.1.4.1.2011.6.139.1.7.1	ScalarhwWlan24G20MconfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.2	ScalarhwWlan24G40MPlusConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.3	ScalarhwWlan24G40MMinusConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.4	ScalarhwWlan5G20MConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.5	ScalarhwWlan5G40MPlusConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.6	ScalarhwWlan5G40MMinusConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.7	ScalarhwWlanConfigChannelApId	read-write	current	Ap index, is used to identify AP uniquely.Query the configurable channel of the ap must contain apid otherwise query are global configurable channel.
1.3.6.1.4.1.2011.6.139.1.7.8	ScalarhwWlan24G80MConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.7.9	ScalarhwWlan5G80MConfigChannel	read-only	current	Description.
1.3.6.1.4.1.2011.6.139.1.8	NodehwWlanStaLoadbalance
1.3.6.1.4.1.2011.6.139.1.8.1	ScalarhwWlanStaLoadbalanceEnable	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.8.2	ScalarhwWlanStaLoadbalanceMode	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.8.3	ScalarhwWlanStaLoadbalanceSessionGap	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.8.4	ScalarhwWlanStaLoadbalanceTrafficGap	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.8.5	ScalarhwWlanStaLoadbalanceAssociateThreshold	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.9	NodehwWlanHsbConfig
1.3.6.1.4.1.2011.6.139.1.9.1	ScalarhwWlanHsbServiceType	read-write	current	The hsb service type can be one of the three values: 1, 2, 3 (1: disable(1) 2: hsbGroup(2) 3: hsbService(3)). The default value of this node is 1.
1.3.6.1.4.1.2011.6.139.1.9.2	ScalarhwWlanHsbGroupId	read-write	current	The id of the hsb group used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.1.9.3	ScalarhwWlanHsbTunnelId	read-write	current	The id of the hsb tunnel used. When hsb service type is disabled, the value of this node is 0xFFFFFFFF.
1.3.6.1.4.1.2011.6.139.1.10	NodehwWlanLocation
1.3.6.1.4.1.2011.6.139.1.10.1	ScalarhwWlanLocationServerIP	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.2	ScalarhwWlanLocationServerPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.3	ScalarhwWlanLocationSourceIP	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.4	ScalarhwWlanLocationApReportToAC	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.5	ScalarhwWlanLocationApReportToServerIp	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.6	ScalarhwWlanLocationApReportToUdpPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.7	ScalarhwWlanLocationApReportToIpv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.10.8	ScalarhwWlanLocationAcReportToIpv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11	NodehwWlanSpectrumAnalysis
1.3.6.1.4.1.2011.6.139.1.11.1	ScalarhwWlanSpectrumAnalysisServerIP	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.2	ScalarhwWlanSpectrumAnalysisServerPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.3	ScalarhwWlanNonWifiDeviceAgeTime	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.4	ScalarhwWlanSpectrogramServerIP	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.5	ScalarhwWlanSpectrogramServerPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.6	ScalarhwWlanSpectrumAnalysisServerIPv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.11.7	ScalarhwWlanSpectrogramServerIPv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12	NodehwWlanSysManagementObjects
1.3.6.1.4.1.2011.6.139.1.12.1	NodehwWlanLBSConfig
1.3.6.1.4.1.2011.6.139.1.12.1.1	ScalarhwWlanLBSAeServerPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.2	ScalarhwWlanLBSAeApReportMode	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.3	ScalarhwWlanLBSAeApReportPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.4	ScalarhwWlanLBSEkServerIp	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.5	ScalarhwWlanLBSEkServerPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.6	ScalarhwWlanLBSEkApReportMode	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.7	ScalarhwWlanLBSEkApReportIp	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.8	ScalarhwWlanLBSEkApReportPort	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.9	ScalarhwWlanLBSSourceIp	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.10	ScalarhwWlanLBSAeCompoundTime	read-write	current	Compound Time of AeroScout Tag Message
1.3.6.1.4.1.2011.6.139.1.12.1.11	ScalarhwWlanLBSEkServerIpv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.12	ScalarhwWlanLBSEkApReportIpv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.12.1.13	ScalarhwWlanLBSSourceIpv6Addr	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.13	NodehwInterAcManagement
1.3.6.1.4.1.2011.6.139.1.13.1	ScalarhwMasterControllerSwitch	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.13.2	ScalarhwConnectMasterControllerSwitch	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.13.3	ScalarhwConnectMasterControllerIPv4Address	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.13.4	ScalarhwConnectMasterControllerIPv6Address	read-write	current	Description.
1.3.6.1.4.1.2011.6.139.1.14	NodehwWlanSysManagementConformance
1.3.6.1.4.1.2011.6.139.1.14.1	NodehwWlanSysManagementCompliances
1.3.6.1.4.1.2011.6.139.1.14.1.1	CompliancehwWlanSysManagementCompliance		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2	NodehwWlanSysManagementObjectGroups
1.3.6.1.4.1.2011.6.139.1.14.2.1	GrouphwWlanTrapRestrainGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.2	GrouphwWlanSysParaGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.3	GrouphwWlanAcSourceInterfaceGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.4	GrouphwWlanBatchQueryGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.5	GrouphwWlanCapwapConfigGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.6	GrouphwWlanAcProtectGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.7	GrouphwWlanConfigChannelGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.8	GrouphwWlanStaLoadbalanceGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.9	GrouphwWlanHsbConfigGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.10	GrouphwWlanLocationGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.11	GrouphwWlanSpectrumAnalysisGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.12	GrouphwWlanLBSConfigGroup		current	Description.
1.3.6.1.4.1.2011.6.139.1.14.2.13	GrouphwInterAcManagementGroup		current	Description.