MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

HUAWEI-XQoS-MIB

10 objects

No module-level DESCRIPTION found.

Imported Objects

HUAWEI-MIB	hwDatacomm
IF-MIB	InterfaceIndex
P-BRIDGE-MIB	EnabledStatus
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TC	MacAddress RowStatus TEXTUAL-CONVENTION

Type Definitions

Name	Syntax	Status	Description
BaType	INTEGER { vlan8021p (1), dscp (2), mplsExp(3), ipPri(4), hqosVlan8021p(5), hqosDscp(6), hqosMplsExp(7), hqosIpPri(8), vlan8021pInbound(9) }	current	The Direction Policy apply on.
CarAction	INTEGER { pass(1), discard(2), remarkIpPrec(3), remarkDscp(4), remarkMplsExp(5), remark(6), remark8021p(7) }	current	The actions taken when packets conforming or exceeding the configured CIR: pass (1), discard (2), remark IP Precedence (3), remark DSCP(4), remark Mpls Exp(5), remark (6), remark 8021p(7)
CosType	INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6), cs6(7), cs7(8), all(9), queue10(10), queue11(11), queue12(12), queue13(13), queue14(14), queue15(15), queue16(16), queue17(17), queue18(18), queue19(19), queue20(20), queue21(21), queue22(22), queue23(23), queue24(24) }	current	BE(1) AF1(2) AF2(3) AF3(4) AF4(5) EF(6) CS6(7) CS7(8) ALL(9) queue10(10) queue11(11) queue12(12) queue13(13) queue14(14) queue15(15) queue16(16) queue17(17) queue18(18) queue19(19) queue20(20) queue21(21) queue22(22) qu…
DirectionType	INTEGER { inbound(1), outbound(2) }	current	The Direction Policy apply on.
EnableFlagType	INTEGER { enable(1), disable(2) }	current	The enable flag.
IPCARRuleType	INTEGER { ipv4Acl(1), ipv4SrcIp(2), ipv4DstIp(3) }	current	Type of IPCAR Rule.
ResetFlag	INTEGER { disable(0), reset(1), enable(2) }	current	Reset Flag: DISABLE (0) RESET (1) ENABLE (2)
SampleType	INTEGER { fix-packets(1), fix-time(2), random-packets(3), random-time(4) }	current	Fix-packets(1) Fix-time(2) Random-packets(3) Random-time(4)
UrpfCtrlType	INTEGER { strict(1), loose(2) }	current	Strict(1) Loose(2)
XQosQueueType	INTEGER { be(1), af1(2), af2(3), af3(4), af4(5), ef(6) }	current	Queue Type: BE (1) AF1(2) AF2(3) AF3(4) AF4(5) EF (6)