MIB Viewer

IB-CA-MIB

50 objects
Copyright (C) The Internet Society (2006). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the instrumentation for an InfiniBand Channel Adapter (CA).
Imported Objects
IB-TC-MIBIbPhysPort infinibandMIB
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.6.1.3.117.4IdentityibCaMIBCopyright (C) The Internet Society (2006). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplem…
1.3.6.1.3.117.4.1NodeibCaObjects
1.3.6.1.3.117.4.1.1NodeibCaGeneralInfo
1.3.6.1.3.117.4.1.1.1TableibCaGeneralInfoTablenot-accessiblecurrentA table containing general information about the Channel Adapters on this network entity.
1.3.6.1.3.117.4.1.1.1.1RowibCaGeneralInfoEntrynot-accessiblecurrentA conceptual row of the ibCaGeneralInfoTable containing information about the general characteristics of each Channel Adapter on this network entity.
1.3.6.1.3.117.4.1.1.1.1.1ColumnibCaIndexnot-accessiblecurrentIndex that identifies the specific CA on this network entity. The index is defined for a range of CAs from 1 to N, where N can have a maximum value of 254.
1.3.6.1.3.117.4.1.1.1.1.2ColumnibCaTyperead-onlycurrentType of Channel Adapter: either a Host Channel Adapter (HCA), or a Target Channel Adapter (TCA). The key difference between an HCA and a TCA is that the HCA su…
1.3.6.1.3.117.4.1.1.1.1.3ColumnibCaNodeGuidread-onlycurrentThe GUID of this CA. All ports on the same node shall report the same CA node GUID value. This provides a means for uniquely identifying a CA node within a sub…
1.3.6.1.3.117.4.1.1.1.1.4ColumnibCaNumPortsread-onlycurrentNumber of physical IB data ports on this Channel Adapter. Ports are numbered starting from 1. If there is more than one port, the ports are numbered sequential…
1.3.6.1.3.117.4.1.2NodeibCaAttrInfo
1.3.6.1.3.117.4.1.2.1TableibCaAttributeTablenot-accessiblecurrentA table containing information about the Channel Adapter attributes on this network entity.
1.3.6.1.3.117.4.1.2.1.1RowibCaAttributeEntrynot-accessiblecurrentA conceptual row of the ibCaAttributeTable containing information about the general characteristics of each Channel Adapter on this network entity.
1.3.6.1.3.117.4.1.2.1.1.1ColumnibCaHasReliableConnectionread-onlycurrentFlag that indicates whether this CA supports Reliable Connection (RC) transport service.
1.3.6.1.3.117.4.1.2.1.1.2ColumnibCaHasUnreliableConnectionread-onlycurrentFlag that indicates whether this CA supports Unreliable Connection (UC) transport service.
1.3.6.1.3.117.4.1.2.1.1.3ColumnibCaHasReliableDatagramread-onlycurrentFlag that indicates whether this CA supports Reliable Datagram (RD) transport service.
1.3.6.1.3.117.4.1.2.1.1.4ColumnibCaHasUnreliableDatagramread-onlycurrentFlag that indicates whether this CA supports Unreliable Datagram (UD) transport service.
1.3.6.1.3.117.4.1.2.1.1.5ColumnibCaSupportsAtomicOperationsread-onlycurrentFlag that indicates whether this CA supports atomic operations. An atomic operation is an operation that is guaranteed to finish without having another operati…
1.3.6.1.3.117.4.1.2.1.1.6ColumnibCaSupportsOtherOperationsread-onlycurrentFlag that indicates whether this CA supports all of the other operations (excluding atomic operations) defined for a particular supported transport service.
1.3.6.1.3.117.4.1.2.1.1.7ColumnibCaSupportsSolicitedEventsread-onlycurrentFlag that indicates whether this CA supports the generation and reception of solicited events. A solicited event is a feature by which a queue pair consumer on…
1.3.6.1.3.117.4.1.2.1.1.8ColumnibCaPathMtuSetSupportread-onlycurrentSet of MTU values (in bytes) supported by this CA for all transport service classes. The Maximum Transfer Unit is the largest size allowable for the packet pay…
1.3.6.1.3.117.4.1.2.1.1.9ColumnibCaGenEndToEndFlowControlread-onlycurrentFlag that indicates whether this CA supports the generation of end-to-end flow control. End-to-end flow control is a mechanism that prevents sending messages w…
1.3.6.1.3.117.4.1.2.1.1.10ColumnibCaSupportsMulticastread-onlycurrentFlag that indicates whether this CA supports multicast operations. Multicast is the ability to deliver a single packet to multiple ports.
1.3.6.1.3.117.4.1.2.1.1.11ColumnibCaSupportsAutoPathMigrationread-onlycurrentFlag that indicates whether this CA supports automatic path migration. Automatic path migration is the process by which a CA (on a per QP basis) signals anothe…
1.3.6.1.3.117.4.1.2.1.1.12ColumnibCaSupportsMemoryProtectionread-onlycurrentFlag that indicates whether this CA supports InfiniBand memory management protection mechanisms.
1.3.6.1.3.117.4.1.2.1.1.13ColumnibCaSupportsLoopbackread-onlycurrentFlag that indicates whether this CA supports loopback operations. Loopback support allows for the sending and receiving of self-addressed packets that do not g…
1.3.6.1.3.117.4.1.2.1.1.14ColumnibCaSupportsSubnetManagerread-onlycurrentFlag that indicates whether this CA supports a Subnet Manager (SM) instance.
1.3.6.1.3.117.4.1.3NodeibCaPortAttrInfo
1.3.6.1.3.117.4.1.3.1TableibCaPortAttributeTablenot-accessiblecurrentA table containing information about the Channel Adapter port attributes on this network entity.
1.3.6.1.3.117.4.1.3.1.1RowibCaPortAttributeEntrynot-accessiblecurrentA conceptual row of the ibCaPortAttributeTable containing information about the general characteristics of each Channel Adapter port on this network entity.
1.3.6.1.3.117.4.1.3.1.1.1ColumnibCaPortIndexnot-accessiblecurrentIndex that identifies the InfiniBand data port. The IBA defines a range of valid data ports from 1 to N, where N can have a maximum value of 254 for an IBA swi…
1.3.6.1.3.117.4.1.3.1.1.2ColumnibCaPortGuidread-onlycurrentThe GUID of this CA port. All ports on the same CA shall report a unique ibCaPortGuid value. This provides a means for uniquely identifying a CA port on a node…
1.3.6.1.3.117.4.1.3.1.1.3ColumnibCaPhysicalInterfaceread-onlycurrentThe physical interface for this CA. When the value is cable(1), the CA supports a cable connector physical interface. This physical attach point is defined for…
1.3.6.1.3.117.4.1.3.1.1.4ColumnibCaSupportsStaticRateControlread-onlycurrentFlag that indicates whether this CA supports static rate control. Static rate controls are required for all IB ports that support a data rate over 2.5 Gbps.
1.3.6.1.3.117.4.1.3.1.1.5ColumnibCaInterpacketDelayValueread-onlycurrentInterpacket Delay Value (IPD) supported for CAs that have static rate control (i.e., the ibCaSupportsStaticRateControl object must have a value of true(1) for …
1.3.6.1.3.117.4.1.3.1.1.6ColumnibCaSupportsMultipathingread-onlycurrentFlag that indicates whether this CA supports multipathing. The CA link layer port checks the unicast DLID in the received packet for validity by masking the nu…
1.3.6.1.3.117.4.1.3.1.1.7ColumnibCaValidatesInPktDlidread-onlycurrentFlag that indicates whether this CA supports the validation of incoming packet DLIDs, and if the GRH is present, the DGID.
1.3.6.1.3.117.4.1.3.1.1.8ColumnibCaMaxGidsPerPortread-onlycurrentMaximum number of GIDs per port. The maximum number of unicast GIDs supported per CA port is implementation specific. Each port will support at least one (1) G…
1.3.6.1.3.117.4.1.3.2TableibCaPortGidTablenot-accessiblecurrentA table containing the port GIDs for each CA.
1.3.6.1.3.117.4.1.3.2.1RowibCaPortGidEntrynot-accessiblecurrentA conceptual row of the ibCaPortGidTable containing information about a particular GID on an IB port for a particular CA.
1.3.6.1.3.117.4.1.3.2.1.1ColumnibCaPortGidIndexnot-accessiblecurrentIndex that identifies the GID entry for this IB data port. Each port on a CA is assigned at least 1 unicast GID. Note, the value of ibCaPortGidIndex will never…
1.3.6.1.3.117.4.1.3.2.1.2ColumnibCaPortGidValueread-onlycurrentThe Global Identifier (GID) is a 128-bit (16-byte) unicast or multicast identifier used to identify a channel adapter port. A GID is a valid 128-bit IPv6 addre…
1.3.6.1.3.117.4.2NodeibCaConformance
1.3.6.1.3.117.4.2.1NodeibCaCompliances
1.3.6.1.3.117.4.2.1.1ComplianceibCaBasicCompliancecurrentThe basic CA implementation requirements for agents that support the IPOIB CA MIB.
1.3.6.1.3.117.4.2.1.2ComplianceibCaFullCompliancecurrentThe complete node implementation requirements for agents that support the full IPOIB CA MIB.
1.3.6.1.3.117.4.2.2NodeibCaGroups
1.3.6.1.3.117.4.2.2.1GroupibCaGeneralGroupcurrentThe ibCaGeneralGroup defines the MIB objects that describe the general characteristics of this Channel Adapter.
1.3.6.1.3.117.4.2.2.2GroupibCaAttrGroupcurrentThe ibCaAttrGroup defines the MIB objects that describe more specific attributes about the Channel Adapter.
1.3.6.1.3.117.4.2.2.3GroupibCaPortAttrGroupcurrentThe ibCaPortAttrGroup defines the MIB objects that describe attributes about the Channel Adapter ports.
1.3.6.1.3.117.4.2.2.4GroupibCaPortGidGroupcurrentThe ibCaPortGidGroup defines the MIB objects that describe attributes about the Channel Adapter port GIDs.