IEEE8021-AS-MIB
137 objects
The Management Information Base module for IEEE 802.1AS time synchronization protocol.
Imported Objects
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber |
| IF-MIB | ifGeneralInformationGroup InterfaceIndexOrZero |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.20 | Identityieee8021AsTimeSyncMib | The Management Information Base module for IEEE 802.1AS time synchronization protocol. | ||
| 1.3.111.2.802.1.1.20.1 | Nodeieee8021AsMIBObjects | |||
| 1.3.111.2.802.1.1.20.1.1 | Nodeieee8021AsDefaultDS | |||
| 1.3.111.2.802.1.1.20.1.1.1 | Scalarieee8021AsDefaultDSClockIdentity | read-only | current | Globally unique manufacturer-assigned clock identifier for the local clock. The identifier is based on an EUI-64. |
| 1.3.111.2.802.1.1.20.1.1.2 | Scalarieee8021AsDefaultDSNumberPorts | read-only | current | The number of PTP ports on the device. For an end station the value is 1. |
| 1.3.111.2.802.1.1.20.1.1.3 | Scalarieee8021AsDefaultDSClockClass | read-only | current | Denotes the traceability of the time or frequency of the local clock. The value shall be selected as follows: a) If the Default Parameter Data Set member gmCap… |
| 1.3.111.2.802.1.1.20.1.1.4 | Scalarieee8021AsDefaultDSClockAccuracy | read-only | current | Characterizes local clock for the purpose of the best master clock algorithm. The value shall be selected as follows: a) clockAccuracy is set to the value that… |
| 1.3.111.2.802.1.1.20.1.1.5 | Scalarieee8021AsDefaultDSOffsetScaledLogVariance | read-only | current | The offsetScaledLogVariance is scaled, offset representation of an estimate of the PTP variance. The PTP variance characterizes the precision and frequency sta… |
| 1.3.111.2.802.1.1.20.1.1.6 | Scalarieee8021AsDefaultDSPriority1 | read-write | current | Most-significant priority declaration in the execution of the best master clock algorithm. Lower values take precedence. The value of priority1 shall be 255 fo… |
| 1.3.111.2.802.1.1.20.1.1.7 | Scalarieee8021AsDefaultDSPriority2 | read-write | current | Least-significant priority declaration in the execution of the best master clock algorithm. Lower values take precedence. The default value is 248 |
| 1.3.111.2.802.1.1.20.1.1.8 | Scalarieee8021AsDefaultDSGmCapable | read-only | current | True (1) if master clock capable; false (2) otherwise. |
| 1.3.111.2.802.1.1.20.1.1.9 | Scalarieee8021AsDefaultDSCurrentUTCOffset | read-only | current | The value is the offset between TAI and UTC, relative to the ClockMaster entity of this time-aware system. It is equal to the global variable sysCurrentUtcOffs… |
| 1.3.111.2.802.1.1.20.1.1.10 | Scalarieee8021AsDefaultDSCurrentUTCOffsetValid | read-only | current | True (1) if ieee8021AsDefaultDSCurrentUTCOffset is known to be correct; false (2) otherwise. |
| 1.3.111.2.802.1.1.20.1.1.11 | Scalarieee8021AsDefaultDSLeap59 | read-only | current | A true (1) value indicates that the last minute of the current UTC day, relative to the ClockMaster entity of this time-aware system, will contain 59 seconds. … |
| 1.3.111.2.802.1.1.20.1.1.12 | Scalarieee8021AsDefaultDSLeap61 | read-only | current | A true (1) value indicates that the last minute of the current UTC day, relative to the ClockMaster entity of this time-aware system, will contain 59 seconds. … |
| 1.3.111.2.802.1.1.20.1.1.13 | Scalarieee8021AsDefaultDSTimeTraceable | read-only | current | The value is set to true (1) if the timescale and the value of Ieee8021AsCurrentUtcOffset, relative to the ClockMaster entity of this time-aware system, are tr… |
| 1.3.111.2.802.1.1.20.1.1.14 | Scalarieee8021AsDefaultDSFrequencyTraceable | read-only | current | The value is set to true (1) if the frequency determining the timescale of the ClockMaster Entity of this time- aware system is traceable to a primary referenc… |
| 1.3.111.2.802.1.1.20.1.1.15 | Scalarieee8021AsDefaultDSTimeSource | read-only | current | The timeSource is an information-only attribute indicating the type of source of time used by a ClockMaster. The value is not used in the selection of the gran… |
| 1.3.111.2.802.1.1.20.1.2 | Nodeieee8021AsCurrentDS | |||
| 1.3.111.2.802.1.1.20.1.2.1 | Scalarieee8021AsCurrentDSStepsRemoved | read-only | current | The number of communication paths traversed between the local clock and the grandmaster clock (see Table 10.3.3). For example, stepsRemoved for a slave clock o… |
| 1.3.111.2.802.1.1.20.1.2.2 | Scalarieee8021AsCurrentDSOffsetFromMasterHs | read-only | current | The most significant 32 bits of the offset, signed 96 bit number in 2**-16 ns, an implementation-specific computation of the current value of the time differen… |
| 1.3.111.2.802.1.1.20.1.2.3 | Scalarieee8021AsCurrentDSOffsetFromMasterMs | read-only | current | The middle significant 32 bits of the offset, signed 96 bit number in 2**-16 ns, an implementation-specific computation of the current value of the time differ… |
| 1.3.111.2.802.1.1.20.1.2.4 | Scalarieee8021AsCurrentDSOffsetFromMasterLs | read-only | current | The least significant 32 bits of the offset, signed 96 bit number in 2**-16 ns, an implementation-specific computation of the current value of the time differe… |
| 1.3.111.2.802.1.1.20.1.2.5 | Scalarieee8021AsCurrentDSLastGmPhaseChangeHs | read-only | current | The value (see 10.2.3.16) is the phase change that occurred on the most recent change in either grandmaster or gmTimeBaseIndicator (see 9.2.2.2). This object M… |
| 1.3.111.2.802.1.1.20.1.2.6 | Scalarieee8021AsCurrentDSLastGmPhaseChangeMs | read-only | current | The value (see 10.2.3.16) is the phase change that occurred on the most recent change in either grandmaster or gmTimeBaseIndicator (see 9.2.2.2). This object M… |
| 1.3.111.2.802.1.1.20.1.2.7 | Scalarieee8021AsCurrentDSLastGmPhaseChangeLs | read-only | current | The value (see 10.2.3.16) is the phase change that occurred on the most recent change in either grandmaster or gmTimeBaseIndicator (see 9.2.2.2). This object M… |
| 1.3.111.2.802.1.1.20.1.2.8 | Scalarieee8021AsCurrentDSLastGmFreqChangeMs | read-only | current | The value (see 10.2.3.17) is the frequency change that occurred on the most recent change in either grandmaster or gmTimeBaseIndicator (see 9.2.2.2). This obje… |
| 1.3.111.2.802.1.1.20.1.2.9 | Scalarieee8021AsCurrentDSLastGmFreqChangeLs | read-only | current | The value (see 10.2.3.17) is the frequency change that occurred on the most recent change in either grandmaster or gmTimeBaseIndicator (see 9.2.2.2). This obje… |
| 1.3.111.2.802.1.1.20.1.2.10 | Scalarieee8021AsCurrentDSGmTimebaseIndicator | read-only | current | This reports the grandmaster's time base change value conveyed in the Sync message. The value is the value of timeBaseIndicator of the current grandmaster (see… |
| 1.3.111.2.802.1.1.20.1.2.11 | Scalarieee8021AsCurrentDSGmChangeCount | read-only | current | This statistics counter tracks the number of times the grandmaster has changed in a gPTP domain. This counter increments when the PortAnnounceInformation state… |
| 1.3.111.2.802.1.1.20.1.2.12 | Scalarieee8021AsCurrentDSTimeOfLastGmChangeEvent | read-only | current | This timestamp denotes the system time when the most recent grandmaster change occurred in a gPTP domain. This timestamp is updated when the PortAnnounceInform… |
| 1.3.111.2.802.1.1.20.1.2.13 | Scalarieee8021AsCurrentDSTimeOfLastGmFreqChangeEvent | read-only | current | This timestamp denotes the system time when the most recent change in grandmaster phase occured, due to a change of either the grandmaster or the grandmaster t… |
| 1.3.111.2.802.1.1.20.1.2.14 | Scalarieee8021AsCurrentDSTimeOfLastGmPhaseChangeEvent | read-only | current | This timestamp denotes the system time when the most recent change in grandmaster frequency occured, due to a change of either the grandmaster or the grandmast… |
| 1.3.111.2.802.1.1.20.1.3 | Nodeieee8021AsParentDS | |||
| 1.3.111.2.802.1.1.20.1.3.1 | Scalarieee8021AsParentDSParentClockIdentity | read-only | current | Clock identifier (clockIdentity) of the local clock's parent clock. The default value is set to ieee8021AsDefaultDSClockIdentity. If this time-aware system is … |
| 1.3.111.2.802.1.1.20.1.3.2 | Scalarieee8021AsParentDSParentPortNumber | read-only | current | Port number (portNumber) of the local clock's parent gPTP port number. If this time-aware system is the grandmaster, the value is the gPTP portNumber of this t… |
| 1.3.111.2.802.1.1.20.1.3.3 | Scalarieee8021AsParentDSCumlativeRateRatio | read-only | current | The value is an estimate of the ratio of the frequency of the grandmaster to the frequency of the LocalClock entity of this time-aware system. Cumulative rate … |
| 1.3.111.2.802.1.1.20.1.3.4 | Scalarieee8021AsParentDSGrandmasterIdentity | read-only | current | Clock identifier (clockIdentity) of the grandmaster. The default value is set to ieee8021AsDefaultDSClockIdentity. |
| 1.3.111.2.802.1.1.20.1.3.5 | Scalarieee8021AsParentDSGrandmasterClockClass | read-only | current | Denotes the traceability of the time or frequency of the grandmaster. The default value is set to ieee8021AsDefaultDSClockClass. |
| 1.3.111.2.802.1.1.20.1.3.6 | Scalarieee8021AsParentDSGrandmasterClockAccuracy | read-only | current | Characterizes the grandmaster clock for the purpose of the best master clock algorithm. The default value is set to ieee8021AsDefaultDSClockAccuracy. |
| 1.3.111.2.802.1.1.20.1.3.7 | Scalarieee8021AsParentDSGrandmasterOffsetScaledLogVariance | read-only | current | Clock Allan variance of the local clock expressed as a base-2 logarithm multiplied by a scale factor of 256. Hysteresis is applied requiring the underlying com… |
| 1.3.111.2.802.1.1.20.1.3.8 | Scalarieee8021AsParentDSGrandmasterPriority1 | read-write | current | Grandmaster's most-significant priority declaration in the execution of the best master clock algorithm. Lower values take precedence. The default value is set… |
| 1.3.111.2.802.1.1.20.1.3.9 | Scalarieee8021AsParentDSGrandmasterPriority2 | read-write | current | Grandmaster's least-significant priority declaration in the execution of the best master clock algorithm. Lower values take precedence. The default value is se… |
| 1.3.111.2.802.1.1.20.1.4 | Nodeieee8021AsTimePropertiesDS | |||
| 1.3.111.2.802.1.1.20.1.4.1 | Scalarieee8021AsTimePropertiesDSCurrentUtcOffset | read-only | current | The value is currentUtcOffset for the current grandmaster (see Table 14.2.9). It is equal to the value of the global variable currentUtcOffset (see 10.3.8.9). … |
| 1.3.111.2.802.1.1.20.1.4.2 | Scalarieee8021AsTimePropertiesDSCurrentUtcOffsetValid | read-only | current | True (1) if ieee8021AsTimePropertiesDSCurrentUTCOffset is known to be correct; false (2) otherwise. The default value is set to ieee8021AsDefaultDSCurrentUTCOf… |
| 1.3.111.2.802.1.1.20.1.4.3 | Scalarieee8021AsTimePropertiesDSLeap59 | read-only | current | The value is leap59 for the current grandmaster (see 14.2.11). It is equal to the global variable leap59 (see 10.3.8.5). A true (1) value indicates that the la… |
| 1.3.111.2.802.1.1.20.1.4.4 | Scalarieee8021AsTimePropertiesDSLeap61 | read-only | current | The value is leap61 for the current grandmaster (see 14.2.12). It is equal to the global variable leap59 (see 10.3.8.4). A true (1) value indicates that the la… |
| 1.3.111.2.802.1.1.20.1.4.5 | Scalarieee8021AsTimePropertiesDSTimeTraceable | read-only | current | The value is timeTraceable for the current grandmaster (see 14.2.13). It is equal to the global variable timeTraceable (see 10.3.8.7). True (1) if the timescal… |
| 1.3.111.2.802.1.1.20.1.4.6 | Scalarieee8021AsTimePropertiesDSFrequencyTraceable | read-only | current | The value is frequencyTraceable for the current grandmaster (see 14.2.14). It is equal to the global variable frequencyTraceable (see 10.3.8.8). True (1) if th… |
| 1.3.111.2.802.1.1.20.1.4.7 | Scalarieee8021AsTimePropertiesDSTimeSource | read-only | current | The value is timeSource for the current grandmaster (see 14.2.15). It is equal to the global variable timeTraceable (see 10.3.8.10). Indicates the source of ti… |
| 1.3.111.2.802.1.1.20.1.5 | Tableieee8021AsPortDSIfTable | not-accessible | current | A table of gPTP port related variables in a time-aware Bridge or for a time-aware end station. A value of 1 is used in a bridge or an end station that does not… |
| 1.3.111.2.802.1.1.20.1.5.1 | Rowieee8021AsPortDSIfEntry | not-accessible | current | A list of objects pertaining to a gPTP port of a time-aware bridge component or a time-aware end station. |
| 1.3.111.2.802.1.1.20.1.5.1.1 | Columnieee8021AsBridgeBasePort | not-accessible | current | This object identifies the bridge port number of the port for which this entry contains bridge management information. For end stations, this port number shall… |
| 1.3.111.2.802.1.1.20.1.5.1.2 | Columnieee8021AsPortDSAsIfIndex | not-accessible | current | This object identifies the gPTP interface group within the system for which this entry contains information. It is the value of the instance of the IfIndex obj… |
| 1.3.111.2.802.1.1.20.1.5.1.3 | Columnieee8021AsPortDSClockIdentity | read-only | current | The clockIdentity is an 8 octet array formed by mapping an IEEE EUI-48 assigned to the time-aware system to IEEE EUI-64 format (i.e., to an array of 8 octets).… |
| 1.3.111.2.802.1.1.20.1.5.1.4 | Columnieee8021AsPortDSPortNumber | read-only | current | The portNumber value for a port on a time-aware end station (i.e., a time-aware system supporting a single gPTP port) shall be 1. The portNumber values for the… |
| 1.3.111.2.802.1.1.20.1.5.1.5 | Columnieee8021AsPortDSPortRole | read-only | current | The value is the value of the port role of this port (see Table 10-1), and is taken from the enumeration in Table 14-5. All other values reserved. The enumerat… |
| 1.3.111.2.802.1.1.20.1.5.1.6 | Columnieee8021AsPortDSPttPortEnabled | read-write | current | 802.1AS function enable for a given port. True (1) if the time-synchronization and best master selection functions of the port are enabled; False (2) otherwise… |
| 1.3.111.2.802.1.1.20.1.5.1.7 | Columnieee8021AsPortDSIsMeasuringDelay | read-only | current | True (1) if the port is measuring link propagation delay; The value is equal to the value of the Boolean isMeasuringPdDelay (see 11.2.12.5 and E.4.3.2) False (… |
| 1.3.111.2.802.1.1.20.1.5.1.8 | Columnieee8021AsPortDSAsCapable | read-only | current | True (1) if and only if it is determined that this time-aware system and the time-aware system at the other ends of the link attached to this port can interope… |
| 1.3.111.2.802.1.1.20.1.5.1.9 | Columnieee8021AsPortDSNeighborPropDelayHs | read-only | current | The most (highest) significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborPropDelay … |
| 1.3.111.2.802.1.1.20.1.5.1.10 | Columnieee8021AsPortDSNeighborPropDelayMs | read-only | current | The second most (middle) significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborProp… |
| 1.3.111.2.802.1.1.20.1.5.1.11 | Columnieee8021AsPortDSNeighborPropDelayLs | read-only | current | The least significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborPropDelay (see 10.2… |
| 1.3.111.2.802.1.1.20.1.5.1.12 | Columnieee8021AsPortDSNeighborPropDelayThreshHs | read-write | current | The most (highest) significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborPropDelayT… |
| 1.3.111.2.802.1.1.20.1.5.1.13 | Columnieee8021AsPortDSNeighborPropDelayThreshMs | read-write | current | The middle significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborPropDelayThresh (s… |
| 1.3.111.2.802.1.1.20.1.5.1.14 | Columnieee8021AsPortDSNeighborPropDelayThreshLs | read-write | current | The least significant 32 bits, unsigned 96 bit number in 2**-16 ns, the value is equal to the value of the per-port global variable neighborPropDelayThresh (se… |
| 1.3.111.2.802.1.1.20.1.5.1.15 | Columnieee8021AsPortDSDelayAsymmetryHs | read-write | current | The most (highest) significant 32 bits, signed 96 bit number in 2**-16 ns. The value is the asymmetry in the propagation delay on the link attached to this por… |
| 1.3.111.2.802.1.1.20.1.5.1.16 | Columnieee8021AsPortDSDelayAsymmetryMs | read-write | current | The middle significant 32 bits, signed 96 bit number in 2**-16 ns. The value is the asymmetry in the propagation delay on the link attached to this port relati… |
| 1.3.111.2.802.1.1.20.1.5.1.17 | Columnieee8021AsPortDSDelayAsymmetryLs | read-write | current | The least significant 32 bits, signed 96 bit number in 2**-16 ns. The value is the asymmetry in the propagation delay on the link attached to this port relativ… |
| 1.3.111.2.802.1.1.20.1.5.1.18 | Columnieee8021AsPortDSNeighborRateRatio | read-only | current | The value is an estimate of the ratio of the frequency of the LocalClock entity of the time-aware system at the other end of the link attached to this port, to… |
| 1.3.111.2.802.1.1.20.1.5.1.19 | Columnieee8021AsPortDSInitialLogAnnounceInterval | read-write | current | The value is the logarithm to the base 2 of the of the announce interval used when (a) the port is initialized, or (b) a message interval request TLV is receiv… |
| 1.3.111.2.802.1.1.20.1.5.1.20 | Columnieee8021AsPortDSCurrentLogAnnounceInterval | read-only | current | The value is the logarithm to the base 2 of the of the current announce transmission interval. The currentLogAnnounceInterval specifies the current value of th… |
| 1.3.111.2.802.1.1.20.1.5.1.21 | Columnieee8021AsPortDSAnnounceReceiptTimeout | read-write | current | The value is the number of Announce message transmission intervals that a slave port waits without receiving an Announce message, before assuming that the mast… |
| 1.3.111.2.802.1.1.20.1.5.1.22 | Columnieee8021AsPortDSInitialLogSyncInterval | read-write | current | The value is the logarithm to the base 2 of the sync interval used when, (a) the port is initialized, or (b) a message interval request TLV is received with th… |
| 1.3.111.2.802.1.1.20.1.5.1.23 | Columnieee8021AsPortDSCurrentLogSyncInterval | read-only | current | The value is the logarithm to the base 2 of the current time-synchronization transmission interval, see 10.6.2.3. The initialization value is -3. |
| 1.3.111.2.802.1.1.20.1.5.1.24 | Columnieee8021AsPortDSSyncReceiptTimeout | read-write | current | The value of this attribute tells a slave port the number of sync intervals to wait without receiving synchronization information, before assuming that the mas… |
| 1.3.111.2.802.1.1.20.1.5.1.25 | Columnieee8021AsPortDSSyncReceiptTimeoutTimeIntervalHs | read-only | current | The most (highest) significant 32 bits, of unsigned 96 bit number in 2**-16 ns. The value is equal to the value of the per port global variable syncReceiptTime… |
| 1.3.111.2.802.1.1.20.1.5.1.26 | Columnieee8021AsPortDSSyncReceiptTimeoutTimeIntervalMs | read-only | current | The middle significant 32 bits, unsigned 96 bit number in 2**-16 ns. The value is equal to the value of the per port global variable syncReceiptTimeoutTimeInte… |
| 1.3.111.2.802.1.1.20.1.5.1.27 | Columnieee8021AsPortDSSyncReceiptTimeoutTimeIntervalLs | read-only | current | The least significant 32 bits, unsigned 96 bit number in 2**-16 ns. The value is equal to the value of the per port global variable syncReceiptTimeoutTimeInter… |
| 1.3.111.2.802.1.1.20.1.5.1.28 | Columnieee8021AsPortDSInitialLogPdelayReqInterval | read-write | current | For full-duplex, IEEE 802.3 media and CSN media that use the peer delay mechanism to measure path delay (see E.4.3.1), the value is the logarithm to the base 2… |
| 1.3.111.2.802.1.1.20.1.5.1.29 | Columnieee8021AsPortDSCurrentLogPdelayReqInterval | read-only | current | For full-duplex, IEEE 802.3 media and CSN media that use the peer delay mechanism to measure path delay (see E.4.3.1), the value is the logarithm to the base 2… |
| 1.3.111.2.802.1.1.20.1.5.1.30 | Columnieee8021AsPortDSAllowedLostResponses | read-write | current | The value is equal to the value of the per-port global variable allowedLostResponses (see 11.2.12.4). It is the number of Pdelay_Req messages for which a valid… |
| 1.3.111.2.802.1.1.20.1.5.1.31 | Columnieee8021AsPortDSVersionNumber | read-only | current | Indicates the PTP version in use on the port. The version number for this standard is set to the value 2 (see 10.5.2.2.3). The contents of this variable SHALL … |
| 1.3.111.2.802.1.1.20.1.5.1.32 | Columnieee8021AsPortDSNupMs | read-write | current | The most significant 32 bits, of unsigned 64 bit fixed point number between 0 and less than 2. For an OLT port of an IEEE 802.3 EPON link, the value is the eff… |
| 1.3.111.2.802.1.1.20.1.5.1.33 | Columnieee8021AsPortDSNupLs | read-write | current | The least significant 32 bits, of unsigned 64 bit fixed point number between 0 and less than 2. For an OLT port of an IEEE 802.3 EPON link, the value is the ef… |
| 1.3.111.2.802.1.1.20.1.5.1.34 | Columnieee8021AsPortDSNdownMs | read-write | current | The least significant 32 bits, of unsigned 64 bit fixed point number between 0 and less than 2. For an OLT port of an IEEE 802.3 EPON link, the value is the ef… |
| 1.3.111.2.802.1.1.20.1.5.1.35 | Columnieee8021AsPortDSNdownLs | read-write | current | The least significant 32 bits, of unsigned 64 bit fixed point number between 0 and less than 2. For an OLT port of an IEEE 802.3 EPON link, the value is the ef… |
| 1.3.111.2.802.1.1.20.1.5.1.36 | Columnieee8021AsPortDSAcceptableMasterTableEnabled | read-write | current | True (1) if acceptableMasterTableEnabled (see 13.1.3.1) and 13.1.3.5) is true and an ONU port attached to an IEEE 802.3 EPON link in a time-aware system. False… |
| 1.3.111.2.802.1.1.20.1.6 | Tableieee8021AsPortStatIfTable | not-accessible | current | A table of time-aware port related counters in a gPTP domain. A value of 1 is used in a bridge or an end station that does not have multiple components. |
| 1.3.111.2.802.1.1.20.1.6.1 | Rowieee8021AsPortStatIfEntry | not-accessible | current | A list of statistics pertaining to a port of a gPTP domain. This statistics table uses ieee8021AsPortDSAsIfIndex, and corresponds to ieee8021ASPortDSTable entr… |
| 1.3.111.2.802.1.1.20.1.6.1.1 | Columnieee8021AsPortStatRxSyncCount | read-only | current | A counter that increments every time synchronization information is received, denoted by a transition to TRUE from FALSE of the rcvdSync variable of the MDSync… |
| 1.3.111.2.802.1.1.20.1.6.1.2 | Columnieee8021AsPortStatRxFollowUpCount | read-only | current | A counter that increments every time a Follow_Up message is received, denoted by a transition to TRUE from FALSE of the rcvdFollowUp variable of the MDSyncRece… |
| 1.3.111.2.802.1.1.20.1.6.1.3 | Columnieee8021AsPortStatRxPdelayRequest | read-only | current | A counter that increments every time a Pdelay_Req message is received, denoted by a transition to TRUE from FALSE of the rcvdPdelayReq variable of the MDPdelay… |
| 1.3.111.2.802.1.1.20.1.6.1.4 | Columnieee8021AsPortStatRxPdelayResponse | read-only | current | A counter that increments every time a Pdelay_Resp message is received, denoted by a transition to TRUE from FALSE of the rcvdPdelayResp variable of the MDPdel… |
| 1.3.111.2.802.1.1.20.1.6.1.5 | Columnieee8021AsPortStatRxPdelayResponseFollowUp | read-only | current | A counter that increments every time a Pdelay_Resp_Follow_Up message is received, denoted by a transition to TRUE from FALSE of the rcvdPdelayRespFollowUp vari… |
| 1.3.111.2.802.1.1.20.1.6.1.6 | Columnieee8021AsPortStatRxAnnounce | read-only | current | A counter that increments every time an Announce message is received, denoted by a transition to TRUE from FALSE of the rcvdAnnounce variable of the PortAnnoun… |
| 1.3.111.2.802.1.1.20.1.6.1.7 | Columnieee8021AsPortStatRxPTPPacketDiscard | read-only | current | A counter that increments every time a PTP message is discarded, caused by the occurrence of any of the following conditions: a) A received Announce message is… |
| 1.3.111.2.802.1.1.20.1.6.1.8 | Columnieee8021AsPortStatRxSyncReceiptTimeouts | read-only | current | A counter that increments every time sync receipt timeout occurs, denoted by entering the AGED state of the PortAnnounceInformation state machine (see 10.3.11 … |
| 1.3.111.2.802.1.1.20.1.6.1.9 | Columnieee8021AsPortStatAnnounceReceiptTimeouts | read-only | current | A counter that increments every time announce receipt timeout occurs, denoted by entering the AGED state of the PortAnnounceInformation state machine (see 10.3… |
| 1.3.111.2.802.1.1.20.1.6.1.10 | Columnieee8021AsPortStatPdelayAllowedLostResponsesExceeded | read-only | current | A counter that increments everytime the value of the variable lostResponses (see, 11.2.15.1.10) exceeds the value of the variable allowedLostResponses (see 11.… |
| 1.3.111.2.802.1.1.20.1.6.1.11 | Columnieee8021AsPortStatTxSyncCount | read-only | current | A counter that increments every time synchronization information is transmitted, denoted by a transition to TRUE from FALSE of the rcvdMDSync variable of the M… |
| 1.3.111.2.802.1.1.20.1.6.1.12 | Columnieee8021AsPortStatTxFollowUpCount | read-only | current | A counter that increments every time a Follow_Up message is transmitted, denoted by a transition to TRUE from FALSE of the rcvdMDTimestampReceive variable of t… |
| 1.3.111.2.802.1.1.20.1.6.1.13 | Columnieee8021AsPortStatTxPdelayRequest | read-only | current | A counter that increments every time a Pdelay_Req message is transmitted, denoted by entering the INITIAL_SEND_PDELAY_REQ or SEND_PDELAY_REQ states of the MDPd… |
| 1.3.111.2.802.1.1.20.1.6.1.14 | Columnieee8021AsPortStatTxPdelayResponse | read-only | current | A counter that increments every time a Pdelay_Resp message is transmitted, denoted by a transition to TRUE from FALSE of the rcvdPdelayReq variable of the MDPd… |
| 1.3.111.2.802.1.1.20.1.6.1.15 | Columnieee8021AsPortStatTxPdelayResponseFollowUp | read-only | current | A counter that increments every time a Pdelay_Resp_Follow_Up message is transmitted, denoted by a transition to TRUE from FALSE of the rcvdMDTimestampReceive v… |
| 1.3.111.2.802.1.1.20.1.6.1.16 | Columnieee8021AsPortStatTxAnnounce | read-only | current | A counter that increments every time an Announce message is transmitted, denoted by entering the TRANSMIT_ANNOUNCE state of the PortAnnounceReceive state machi… |
| 1.3.111.2.802.1.1.20.1.7 | Nodeieee8021AsAcceptableMasterTableDS | |||
| 1.3.111.2.802.1.1.20.1.7.1 | Nodeieee8021AsAcceptableMasterTableDSBase | |||
| 1.3.111.2.802.1.1.20.1.7.1.1 | Scalarieee8021AsAcceptableMasterTableDSMaxTableSize | read-only | current | The value is the maximum size of the AcceptableMasterTable. It is equal to the maxTableSize member of the AcceptableMasterTable structure (see 13.1.3.2) |
| 1.3.111.2.802.1.1.20.1.7.1.2 | Scalarieee8021AsAcceptableMasterTableDSActualTableSize | read-write | current | The value is the actual size of the AcceptableMasterTable. It is equal to the actualTableSize member of the AcceptableMasterTable structure (see 13.1.3.2 and 1… |
| 1.3.111.2.802.1.1.20.1.7.2 | Nodeieee8021AsAcceptableMasterTableDSMaster | |||
| 1.3.111.2.802.1.1.20.1.7.2.1 | Tableieee8021AsAcceptableMasterTableDSMasterTable | not-accessible | current | A table of time-aware port related variables in a time-aware bridge or for a time-aware end station. A value of 1 is used in a bridge or an end station that do… |
| 1.3.111.2.802.1.1.20.1.7.2.1.1 | Rowieee8021AsAcceptableMasterTableDSMasterEntry | not-accessible | current | A list of objects pertaining to a port of a time-aware bridge component or a time-aware end station. |
| 1.3.111.2.802.1.1.20.1.7.2.1.1.1 | Columnieee8021AsAcceptableMasterTableDSMasterId | not-accessible | current | Acceptable Master row entry index in this ieee8021AsAcceptableMasterTabdDSMaster Entry applies. If the does not contain Media type of EPON, this variable (inde… |
| 1.3.111.2.802.1.1.20.1.7.2.1.1.2 | Columnieee8021AsAcceptableMasterClockIdentity | read-create | current | Globally unique manufacturer-assigned clock identifier for the local clock port. The identifier is based on an EUI-64. |
| 1.3.111.2.802.1.1.20.1.7.2.1.1.3 | Columnieee8021AsAcceptableMasterPortNumber | read-create | current | This object represents a Port or aggregated port on a bridge component or end-station. This object and ieee8021AsAcceptableMasterClockIdentity together forms A… |
| 1.3.111.2.802.1.1.20.1.7.2.1.1.4 | Columnieee8021AsAcceptableMasterAlternatePriority1 | read-create | current | If the alternatePriority1 member of the AcceptableMaster array element that corresponds to the sourcePortIdentity of a received Announce message is greater tha… |
| 1.3.111.2.802.1.1.20.1.7.2.1.1.5 | Columnieee8021AsAcceptableMasterRowStatus | read-create | current | This object indicates the status of an entry, and is used to create/delete entries. |
| 1.3.111.2.802.1.1.20.2 | Nodeieee8021AsConformance | |||
| 1.3.111.2.802.1.1.20.2.1 | Nodeieee8021AsCompliances | |||
| 1.3.111.2.802.1.1.20.2.1.1 | Complianceieee8021AsCompliance | deprecated | The compliance statement for support of the IEEE8021-AS-MIB module. | |
| 1.3.111.2.802.1.1.20.2.1.2 | Complianceieee8021AsComplianceCor1 | read-only | current | The compliance statement for support of the IEEE8021-AS-MIB module. |
| 1.3.111.2.802.1.1.20.2.2 | Nodeieee8021AsGroups | |||
| 1.3.111.2.802.1.1.20.2.2.1 | Groupieee8021ASSystemDefaultReqdGroup | current | Objects in the System Default required global group. | |
| 1.3.111.2.802.1.1.20.2.2.2 | Groupieee8021ASSystemCurrentGroup | current | Objects in the System Current global group. | |
| 1.3.111.2.802.1.1.20.2.2.3 | Groupieee8021AsSystemClockParentGroup | current | Objects in the Clock Parent global group. | |
| 1.3.111.2.802.1.1.20.2.2.4 | Groupieee8021AsSystemTimePropertiesGroup | current | Objects for the Time Properties Global group. | |
| 1.3.111.2.802.1.1.20.2.2.5 | Groupieee8021AsPortDataSetGlobalGroup | current | Objects for the port dataset global group. | |
| 1.3.111.2.802.1.1.20.2.2.6 | Groupieee8021ASPortStatisticsGlobalGroup | current | Objects in the Port statistics global group. | |
| 1.3.111.2.802.1.1.20.2.2.7 | Groupieee8021AsAcceptableMasterBaseGroup | current | Objects for the Acceptable Master group. | |
| 1.3.111.2.802.1.1.20.2.2.8 | Groupieee8021AsAcceptableMasterTableGroup | current | Objects for the Acceptable Master group. | |
| 1.3.111.2.802.1.1.20.2.3 | Nodeieee8021AsCompliancesCor1 |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ClockIdentity | OCTET STRING (SIZE (8)) | current | Represents an IEEE 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, EUI-64. EUI-48 converts to EUI-64 as specified by IEEE. The conversion assigns values 255 and 254 to octets 3 and 4 respect… |
| IEEE8021ASClockAccuracyValue | INTEGER { timeAccurateTo25ns(32), timeAccurateTo100ns(33), timeAccurateTo250ns(34), timeAccurateTo1us(35), timeAccurateTo2dot5us(36), timeAccurateTo10us(37), timeAccurateTo25us(38), timeAccurateTo100us(39), timeAccurateTo250us(40), timeAccurateTo1ms(41), timeAccurateTo2dot5ms(42), timeAccurateTo10ms(43), timeAccurateTo25ms(44), timeAccurateTo100ms(45), timeAccurateTo250ms(46), timeAccurateTo1s(47), timeAccurateTo10s(48), timeAccurateToGT10s(49), timeAccurateToUnknown(254) } | current | Clock Accuracy Value from 8.6.2.3, with the following interpretation placed on the value: 32: The time is accurate to within 25 ns, 33: The time is accurate to within 100 ns, 34: The time is accurate to within 250 ns, 3… |
| IEEE8021ASClockClassValue | INTEGER { primarySync(6), primarySyncLost(7), applicationSpecificSync(13), applicationSpecficSyncLost(14), primarySyncAlternativeA(52), applicationSpecificAlternativeA(58), primarySyncAlternativeB(187), applicationSpecficAlternativeB(193), defaultClock(248), slaveOnlyClock(255) } | current | Clock Class Value from IEEE Std 1588-2008 7.6.2.4, with the following interpretation placed on the value: 6: A clock that is synchronized to a primary reference time source, 7: A clock that has previously been designate… |
| IEEE8021ASTimeSourceValue | INTEGER { atomicClock(16), gps(32), terrestrialRadio(48), ptp(64), ntp(80), handSet(96), other(144), internalOscillator(160) } | current | The timeSource is an information only attribute indicating the type of source of time used by a ClockMaster, representing categories. For example, the GPS entry would include not only the GPS system of the U.S. Departme… |