IEEE8021-MIRP-MIB
15 objects
Multiple I-SID Registration Protocol module for managing IEEE 802.1Qbe Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
Imported Objects
| IEEE8021-BRIDGE-MIB | 1ap ieee8021BridgeBasePortEntry |
| IEEE8021-PBB-MIB | 1ap ieee8021PbbBackboneEdgeBridgeObjects |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumberOrZero |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-MIB | systemGroup |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.9.1.1.1.7 | Scalarieee8021PbbMirpEnableStatus | read-write | current | The administrative status requested by management for MIRP. The value true(1) indicates that MIRP should be enabled on this component, on all ports for which i… |
| 1.3.111.2.802.1.1.9.1.1.1.8 | Scalarieee8021PbbMirpBvid | read-write | current | The B-VID to which received MIRPDUs are to be assigned, or 0, if they are to be sent on the CBP PVID. |
| 1.3.111.2.802.1.1.9.1.1.1.9 | Scalarieee8021PbbMirpDestSelector | read-write | current | An enumerated value specifying what destination_address and vlan_identifier are to be used when the MIRP Participant transmits an MIRPDU towards the MAC relay … |
| 1.3.111.2.802.1.1.9.1.1.1.10 | Scalarieee8021PbbMirpPnpEnable | read-write | current | A Boolean value specifying the administrative status requested by management for attaching a MIRP Participant to a PNP if and only if this system is a Backbone… |
| 1.3.111.2.802.1.1.9.1.1.1.11 | Scalarieee8021PbbMirpPnpPortNumber | read-only | current | The Bridge Port Number of the Provider Network Port (PNP) that has an associated MIRP Participant, or 0, if no Bridge Port has an associated MIRP Participant. … |
| 1.3.111.2.802.1.1.23 | Identityieee8021MirpMib | Multiple I-SID Registration Protocol module for managing IEEE 802.1Qbe Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Co… | ||
| 1.3.111.2.802.1.1.23.1 | Nodeieee8021MirpV2MIBObjects | |||
| 1.3.111.2.802.1.1.23.1.1 | Tableieee8021MirpV2PortTable | not-accessible | current | A table that contains controls for the Multiple I-SID Registration Protocol (MIRP) state machines for all of the Ports of a Bridge. |
| 1.3.111.2.802.1.1.23.1.1.1 | Rowieee8021MirpV2PortEntry | not-accessible | current | Each entry contains the MIRP Participant controls for one Port. |
| 1.3.111.2.802.1.1.23.1.1.1.1 | Columnieee8021MirpV2PortEnabledStatus | read-create | current | The state of MIRP operation on this port. The value true(1) indicates that MIRP is enabled on this port, as long as ieee8021PbbMirpEnableStatus is also enabled… |
| 1.3.111.2.802.1.1.23.2 | Nodeieee8021MirpV2Conformance | |||
| 1.3.111.2.802.1.1.23.2.1 | Nodeieee8021MirpV2Compliances | |||
| 1.3.111.2.802.1.1.23.2.1.1 | Complianceieee8021MirpV2BridgeCompliance | current | The compliance statement for support by a Bridge of the IEEE8021-MIRP-MIB module. | |
| 1.3.111.2.802.1.1.23.2.2 | Nodeieee8021MirpV2Groups | |||
| 1.3.111.2.802.1.1.23.2.2.1 | Groupieee8021MirpV2ReqdGroup | current | Objects in the MIRP augmentation required group. |