IEEE8021-MSTP-MIB
114 objects
The Bridge MIB modules for managing devices that support IEEE Std 802.1Q multiple spanning tree groups. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
Imported Objects
| BRIDGE-MIB | BridgeId |
| IEEE8021-TC-MIB | IEEE8021BridgePortNumber IEEE8021MstIdentifier IEEE8021PbbComponentIdentifier IEEE8021VlanIndex ieee802dot1mibs |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.6 | Identityieee8021MstpMib | The Bridge MIB modules for managing devices that support IEEE Std 802.1Q multiple spanning tree groups. Unless otherwise indicated, the references in this MIB … | ||
| 1.3.111.2.802.1.1.6.0 | Nodeieee8021MstpNotifications | |||
| 1.3.111.2.802.1.1.6.1 | Nodeieee8021MstpObjects | |||
| 1.3.111.2.802.1.1.6.1.1 | Tableieee8021MstpCistTable | not-accessible | current | The Common and Internal Spanning Tree (CIST) Table. Each row in the table represents information regarding a Bridge's Bridge Protocol Entity for the CIST. Note… |
| 1.3.111.2.802.1.1.6.1.1.1 | Rowieee8021MstpCistEntry | not-accessible | current | A CIST Table entry. |
| 1.3.111.2.802.1.1.6.1.1.1.1 | Columnieee8021MstpCistComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.1.1.2 | Columnieee8021MstpCistBridgeIdentifier | read-only | current | The Bridge Identifier for the CIST. |
| 1.3.111.2.802.1.1.6.1.1.1.3 | Columnieee8021MstpCistTopologyChange | read-only | current | In an STP Bridge, the value of the Topology Change parameter (14.8.1.1.3, item d of IEEE Std 802.1D, 2004 Edition), or in an RSTP or MSTP Bridge, asserted if t… |
| 1.3.111.2.802.1.1.6.1.1.1.4 | Columnieee8021MstpCistRegionalRootIdentifier | read-only | current | In an MSTP Bridge, the CIST Regional Root Identifier parameter, i.e. the Bridge Identifier of the current CIST Regional Root. |
| 1.3.111.2.802.1.1.6.1.1.1.5 | Columnieee8021MstpCistPathCost | read-only | current | In an MSTP Bridge, the CIST Path Cost parameter, i.e. the CIST path cost from the transmitting Bridge to the CIST Regional Root. The sum (about 20 possible out… |
| 1.3.111.2.802.1.1.6.1.1.1.6 | Columnieee8021MstpCistMaxHops | read-write | current | In an MSTP Bridge, the MaxHops parameter. The value of this object MUST be retained across reinitializations of the management system. |
| 1.3.111.2.802.1.1.6.1.2 | Tableieee8021MstpTable | not-accessible | current | In an MSTP Bridge, the MSTP Table. Each row in the Table represents information regarding a Bridge's Bridge Protocol Entity for the specified Spanning Tree ins… |
| 1.3.111.2.802.1.1.6.1.2.1 | Rowieee8021MstpEntry | not-accessible | current | A MSTP Table entry. |
| 1.3.111.2.802.1.1.6.1.2.1.1 | Columnieee8021MstpComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.2.1.2 | Columnieee8021MstpId | not-accessible | current | In an MSTP Bridge, this parameter is the MSTID, i.e. the identifier of a Spanning Tree (or MST) Instance. |
| 1.3.111.2.802.1.1.6.1.2.1.3 | Columnieee8021MstpBridgeId | read-only | current | In an MSTP Bridge, the Bridge Identifier for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.4 | Columnieee8021MstpTimeSinceTopologyChange | read-only | current | In an MSTP Bridge, count in seconds of the time elapsed since tcWhile was last non-zero for any Port for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.5 | Columnieee8021MstpTopologyChanges | read-only | current | In an MSTP Bridge, count of the times tcWhile has been non-zero for any Port for the MSTI since the Bridge was powered on or initialized. |
| 1.3.111.2.802.1.1.6.1.2.1.6 | Columnieee8021MstpTopologyChange | read-only | current | In an MSTP Bridge, the Topology Change parameter value: true(1) if tcWhile is non-zero for any Port for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.7 | Columnieee8021MstpDesignatedRoot | read-only | current | In an MSTP Bridge, the Designated Root parameter value, i.e. the Bridge Identifier of the Root Bridge for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.8 | Columnieee8021MstpRootPathCost | read-only | current | In an MSTP Bridge, the Root Path Cost parameter value, i.e. the path cost from the transmitting Bridge to the Root Bridge for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.9 | Columnieee8021MstpRootPort | read-only | current | In an MSTP Bridge, the Root Port parameter value, i.e. the Root Port for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.10 | Columnieee8021MstpBridgePriority | read-create | current | In an MSTP Bridge, the Bridge Priority parameter value for the MSTI, i.e. the most significant 4 bits of the Bridge Identifier for the MSTI. |
| 1.3.111.2.802.1.1.6.1.2.1.11 | Columnieee8021MstpVids0 | read-only | current | This object contains the first 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresp… |
| 1.3.111.2.802.1.1.6.1.2.1.12 | Columnieee8021MstpVids1 | read-only | current | This object contains the second 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corres… |
| 1.3.111.2.802.1.1.6.1.2.1.13 | Columnieee8021MstpVids2 | read-only | current | This object contains the third 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corresp… |
| 1.3.111.2.802.1.1.6.1.2.1.14 | Columnieee8021MstpVids3 | read-only | current | This object contains the fourth 1024 bits of the 4096 bit vector indicating which VIDs are assigned to this MSTID. The high order bit of the first octet corres… |
| 1.3.111.2.802.1.1.6.1.2.1.15 | Columnieee8021MstpRowStatus | read-create | current | The status of the row. Read SNMPv2-TC (RFC2579) for an explanation of the possible values this object can take. The writable columns in a row can not be change… |
| 1.3.111.2.802.1.1.6.1.3 | Tableieee8021MstpCistPortTable | not-accessible | current | The CIST Port Table. Each row in the Table represents information regarding a specific Port within the Bridge's Bridge Protocol Entity, for the CIST. The value… |
| 1.3.111.2.802.1.1.6.1.3.1 | Rowieee8021MstpCistPortEntry | not-accessible | current | A CIST Port Table entry. |
| 1.3.111.2.802.1.1.6.1.3.1.1 | Columnieee8021MstpCistPortComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.3.1.2 | Columnieee8021MstpCistPortNum | not-accessible | current | The Port's Port Number parameter value for the CIST, i.e. the number of the Bridge Port for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.3 | Columnieee8021MstpCistPortUptime | read-only | current | The Port's Uptime parameter value for the CIST, i.e. the count in seconds of the time elapsed since the Port was last reset or initialized (BEGIN, Annex E). |
| 1.3.111.2.802.1.1.6.1.3.1.4 | Columnieee8021MstpCistPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.111.2.802.1.1.6.1.3.1.5 | Columnieee8021MstpCistPortDesignatedRoot | read-only | current | The CIST Regional Root Identifier component of the Port's port priority vector, as defined in 13.10, for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.6 | Columnieee8021MstpCistPortTopologyChangeAck | read-only | current | The Port's Topology Change Acknowledge parameter value. True(1) if a Configuration Message with a topology change acknowledge flag set is to be transmitted. |
| 1.3.111.2.802.1.1.6.1.3.1.7 | Columnieee8021MstpCistPortHelloTime | read-only | current | The Port's Hello Time timer parameter value, for the CIST. In centi-seconds |
| 1.3.111.2.802.1.1.6.1.3.1.8 | Columnieee8021MstpCistPortAdminEdgePort | read-write | current | In a Bridge that supports the identification of edge ports, the Port's Admin Edge Port parameter value, for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.9 | Columnieee8021MstpCistPortOperEdgePort | read-only | current | In a Bridge that supports the identification of edge ports, the Port's operational Edge Port parameter value, for the CIST. True(1) if it is an Oper Edge Port. |
| 1.3.111.2.802.1.1.6.1.3.1.10 | Columnieee8021MstpCistPortMacEnabled | read-write | current | In a Bridge that supports the MAC Enabled parameter, the current state of the MAC Enabled parameter. True(1) indicates that adminstratively the MAC is set as i… |
| 1.3.111.2.802.1.1.6.1.3.1.11 | Columnieee8021MstpCistPortMacOperational | read-only | current | In a Bridge that supports the MAC Operational parameter, the current state of the MAC Operational parameter. True(1) indicates the MAC is operational. |
| 1.3.111.2.802.1.1.6.1.3.1.12 | Columnieee8021MstpCistPortRestrictedRole | read-write | current | The current state of the restrictedRole parameter for the Port. True(1) causes the Port not to be selected as Root Port for the CIST or any MSTI. |
| 1.3.111.2.802.1.1.6.1.3.1.13 | Columnieee8021MstpCistPortRestrictedTcn | read-write | current | The current state of the restrictedTcn parameter for the Port. True(1) causes the Port not to propagate topology changes to other Ports. |
| 1.3.111.2.802.1.1.6.1.3.1.14 | Columnieee8021MstpCistPortRole | read-only | current | The current Port Role for the Port (i.e., Root, Alternate, Designated, or Backup), for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.15 | Columnieee8021MstpCistPortDisputed | read-only | current | The current value of the disputed variable for the CIST for the Port. A value of true(1) indicates that the disputed variable is set. A value of false(2) indic… |
| 1.3.111.2.802.1.1.6.1.3.1.16 | Columnieee8021MstpCistPortCistRegionalRootId | read-only | current | In an MSTP Bridge, the CIST Regional Root Identifier, i.e. the Bridge Identifier of the current CIST Regional Root, for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.17 | Columnieee8021MstpCistPortCistPathCost | read-only | current | In an MSTP Bridge, the Port's Port Path Cost parameter value for the CIST. |
| 1.3.111.2.802.1.1.6.1.3.1.18 | Columnieee8021MstpCistPortProtocolMigration | read-write | current | In an MSTP Bridge, the current value of the mcheck variable for the Port. A value of true(1) forces the state machine to perform functions as per 13.27.38. |
| 1.3.111.2.802.1.1.6.1.3.1.19 | Columnieee8021MstpCistPortEnableBPDURx | read-write | current | In an MSTP Bridge, the enableBPDUrx parameter value. A value of false(2) indicates that BPDUs are ignored. |
| 1.3.111.2.802.1.1.6.1.3.1.20 | Columnieee8021MstpCistPortEnableBPDUTx | read-write | current | In an MSTP Bridge, the enableBPDUtx parameter value. A value of false(2) indicates that BPDUs are not transmitted. |
| 1.3.111.2.802.1.1.6.1.3.1.21 | Columnieee8021MstpCistPortPseudoRootId | read-write | current | In an MSTP Bridge, the pseudoRootId parameter value. |
| 1.3.111.2.802.1.1.6.1.3.1.22 | Columnieee8021MstpCistPortIsL2Gp | read-write | current | In an MSTP Bridge, the isL2gp parameter value. A value of true(1) indicates this is an L2GP port. |
| 1.3.111.2.802.1.1.6.1.4 | Tableieee8021MstpPortTable | not-accessible | current | The MSTP Port Table. Each row in the Table represents information regarding a specific Port within the Bridge's Bridge Protocol Entity, for a given MSTI. The v… |
| 1.3.111.2.802.1.1.6.1.4.1 | Rowieee8021MstpPortEntry | not-accessible | current | A MSTP Port Table entry. |
| 1.3.111.2.802.1.1.6.1.4.1.1 | Columnieee8021MstpPortComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.4.1.2 | Columnieee8021MstpPortMstId | not-accessible | current | In an MSTP Bridge, this parameter is the MSTID, i.e. the identifier of a Spanning Tree (or MST) Instance. |
| 1.3.111.2.802.1.1.6.1.4.1.3 | Columnieee8021MstpPortNum | not-accessible | current | In an MSTP Bridge, the Port's Port Number parameter value for the MSTI, i.e. the number of the Bridge Port for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.4 | Columnieee8021MstpPortUptime | read-only | current | In an MSTP Bridge, the Port's Uptime parameter value for the MSTI, i.e. the count in seconds of the time elapsed since the Port was last reset or initialized (… |
| 1.3.111.2.802.1.1.6.1.4.1.5 | Columnieee8021MstpPortState | read-only | current | In an MSTP Bridge, the current state of the Port (i.e., Disabled, Listening, Learning, Forwarding, or Blocking), for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.6 | Columnieee8021MstpPortPriority | read-write | current | In an MSTP Bridge, the Port's Port Priority parameter value for the MSTI, i.e. the priority field for the Port Identifier for the Port for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.7 | Columnieee8021MstpPortPathCost | read-write | current | In an MSTP Bridge, the Port's Port Path Cost parameter value for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.8 | Columnieee8021MstpPortDesignatedRoot | read-only | current | In an MSTP Bridge, the Regional Root Identifier component of the Port's MSTI port priority vector, as defined in 13.11, for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.9 | Columnieee8021MstpPortDesignatedCost | read-only | current | In an MSTP Bridge, the Internal Root Path Cost component of the Port's MSTI port priority vector, as defined in 13.11, for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.10 | Columnieee8021MstpPortDesignatedBridge | read-only | current | In an MSTP Bridge, the Designated Bridge Identifier component of the Port's MSTI port priority vector, as defined in 13.11, for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.11 | Columnieee8021MstpPortDesignatedPort | read-only | current | In an MSTP Bridge, the Designated Port Identifier component of the Port's MSTI port priority vector, as defined in 13.11, for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.12 | Columnieee8021MstpPortRole | read-only | current | In an MSTP Bridge, the current Port Role for the Port (i.e., Root, Alternate, Designated, or Backup), for the MSTI. |
| 1.3.111.2.802.1.1.6.1.4.1.13 | Columnieee8021MstpPortDisputed | read-only | current | In an MSTP Bridge, the current value of the disputed variable for the MSTI for the Port. |
| 1.3.111.2.802.1.1.6.1.4.1.14 | Columnieee8021MstpPortAdminPathCost | read-write | current | In an MSTP Bridge, the administrative value of the Port's Port Path Cost parameter value for the MSTI. Writing a value of '0' assigns the automatically calcula… |
| 1.3.111.2.802.1.1.6.1.5 | Tableieee8021MstpFidToMstiTable | not-accessible | deprecated | In an MSTP Bridge, the fixed-length FID to MSTID Allocation Table entry. Each entry in the Table corresponds to a FID, and the value of the entry specifies the… |
| 1.3.111.2.802.1.1.6.1.5.1 | Rowieee8021MstpFidToMstiEntry | not-accessible | deprecated | In an MSTP Bridge, a FID to MSTID Allocation Table entry. |
| 1.3.111.2.802.1.1.6.1.5.1.1 | Columnieee8021MstpFidToMstiComponentId | not-accessible | deprecated | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.5.1.2 | Columnieee8021MstpFidToMstiFid | not-accessible | deprecated | In an MSTP Bridge, the FID of the entry in the FID to MSTID Allocation Table. |
| 1.3.111.2.802.1.1.6.1.5.1.3 | Columnieee8021MstpFidToMstiMstId | read-write | deprecated | In an MSTP Bridge, the MSTID to which the FID (of the entry in the FID to MSTID Allocation Table) is to be allocated. |
| 1.3.111.2.802.1.1.6.1.6 | Tableieee8021MstpVlanTable | not-accessible | deprecated | In an MSTP Bridge, the fixed-length (4094 elements), read-only, MST Configuration Table. Its elements are derived from other configuration information held by … |
| 1.3.111.2.802.1.1.6.1.6.1 | Rowieee8021MstpVlanEntry | not-accessible | deprecated | In an MSTP Bridge, a MST Configuration Table entry. |
| 1.3.111.2.802.1.1.6.1.6.1.1 | Columnieee8021MstpVlanComponentId | not-accessible | deprecated | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.6.1.2 | Columnieee8021MstpVlanId | not-accessible | deprecated | In an MSTP Bridge, the VID of the entry in the MST Configuration Table. |
| 1.3.111.2.802.1.1.6.1.6.1.3 | Columnieee8021MstpVlanMstId | read-only | deprecated | In an MSTP Bridge, the MSTID value corresponding to the VID of the entry in the MST Configuration Table. |
| 1.3.111.2.802.1.1.6.1.7 | Tableieee8021MstpConfigIdTable | not-accessible | current | A table containing the MST Configuration Identifier for each virtual Bridge. In simple situations where there is only a single component, there will only be a … |
| 1.3.111.2.802.1.1.6.1.7.1 | Rowieee8021MstpConfigIdEntry | not-accessible | current | An entry contining the MST Configuration Identifier of a Bridge. |
| 1.3.111.2.802.1.1.6.1.7.1.1 | Columnieee8021MstpConfigIdComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.7.1.2 | Columnieee8021MstpConfigIdFormatSelector | read-write | current | In an MSTP Bridge, the Configuration Identifier Format Selector in use by the Bridge, in the MST Configuration Identifier. This has a value of 0 to indicate th… |
| 1.3.111.2.802.1.1.6.1.7.1.3 | Columnieee8021MstpConfigurationName | read-write | current | In an MSTP Bridge, the Configuration Name in the MST Configuration Identifier. |
| 1.3.111.2.802.1.1.6.1.7.1.4 | Columnieee8021MstpRevisionLevel | read-write | current | In an MSTP Bridge, the Revision Level in the MST Configuration Identifier. |
| 1.3.111.2.802.1.1.6.1.7.1.5 | Columnieee8021MstpConfigurationDigest | read-only | current | In an MSTP Bridge, the Configuration Digest in the MST Configuration Identifier. |
| 1.3.111.2.802.1.1.6.1.8 | Tableieee8021MstpCistPortExtensionTable | not-accessible | current | The CIST Port Extensions Table. Each row in the Table represents information regarding a specific Port within the Bridge's Bridge Protocol Entity, for the CIST. |
| 1.3.111.2.802.1.1.6.1.8.1 | Rowieee8021MstpCistPortExtensionEntry | not-accessible | current | A list of additional objects containing information maintained by every port about the CIST state for that port. |
| 1.3.111.2.802.1.1.6.1.8.1.1 | Columnieee8021MstpCistPortAutoEdgePort | read-write | current | The administrative value of the Auto Edge Port parameter. A value of true(1) indicates if the Bridge detection state machine (BDM, 13.31) is to detect other Br… |
| 1.3.111.2.802.1.1.6.1.8.1.2 | Columnieee8021MstpCistPortAutoIsolatePort | read-only | current | The operational value of the Isolate Port parameter. A value of true(1) indicates a Designated Port will transition to discarding if both ieee8021SpanningTreeR… |
| 1.3.111.2.802.1.1.6.1.9 | Tableieee8021MstpFidToMstiV2Table | not-accessible | current | In an MSTP Bridge, the fixed-length FID to MSTID Allocation Table entry. Each entry in the Table corresponds to a FID, and the value of the entry specifies the… |
| 1.3.111.2.802.1.1.6.1.9.1 | Rowieee8021MstpFidToMstiV2Entry | not-accessible | current | In an MSTP Bridge, a FID to MSTID Allocation Table entry. |
| 1.3.111.2.802.1.1.6.1.9.1.1 | Columnieee8021MstpFidToMstiV2ComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.9.1.2 | Columnieee8021MstpFidToMstiV2Fid | not-accessible | current | In an MSTP Bridge, the FID of the entry in the FID to MSTID Allocation Table. |
| 1.3.111.2.802.1.1.6.1.9.1.3 | Columnieee8021MstpFidToMstiV2MstId | read-write | current | In an MSTP Bridge, the MSTID to which the FID (of the entry in the FID to MSTID Allocation Table) is to be allocated. In an SPT Bridge, the value 4095 is used … |
| 1.3.111.2.802.1.1.6.1.10 | Tableieee8021MstpVlanV2Table | not-accessible | current | In an MSTP Bridge, the fixed-length (4094 elements), read-only, MST Configuration Table. Its elements are derived from other configuration information held by … |
| 1.3.111.2.802.1.1.6.1.10.1 | Rowieee8021MstpVlanV2Entry | not-accessible | current | In an MSTP Bridge, a MST Configuration Table entry. |
| 1.3.111.2.802.1.1.6.1.10.1.1 | Columnieee8021MstpVlanV2ComponentId | not-accessible | current | The component identifier is used to distinguish between the multiple virtual Bridge instances within a PBB. In simple situations where there is only a single c… |
| 1.3.111.2.802.1.1.6.1.10.1.2 | Columnieee8021MstpVlanV2Id | not-accessible | current | In an MSTP Bridge, the VID of the entry in the MST Configuration Table. |
| 1.3.111.2.802.1.1.6.1.10.1.3 | Columnieee8021MstpVlanV2MstId | read-only | current | In an MSTP Bridge, the MSTID value corresponding to the VID of the entry in the MST Configuration Table. In an SPT Bridge, a value of 4095 is used to indicate … |
| 1.3.111.2.802.1.1.6.2 | Nodeieee8021MstpConformance | |||
| 1.3.111.2.802.1.1.6.2.1 | Nodeieee8021MstpGroups | |||
| 1.3.111.2.802.1.1.6.2.1.1 | Groupieee8021MstpCistGroup | current | Objects for the CIST group | |
| 1.3.111.2.802.1.1.6.2.1.2 | Groupieee8021MstpGroup | current | Objects for the MST group | |
| 1.3.111.2.802.1.1.6.2.1.3 | Groupieee8021MstpCistPortGroup | current | Objects for the CIST Port group | |
| 1.3.111.2.802.1.1.6.2.1.4 | Groupieee8021MstpPortGroup | current | Objects for the MST Port group | |
| 1.3.111.2.802.1.1.6.2.1.5 | Groupieee8021MstpFidToMstiGroup | deprecated | Objects for the MST FID to MSTID Allocation Table group | |
| 1.3.111.2.802.1.1.6.2.1.6 | Groupieee8021MstpVlanGroup | deprecated | Objects for the MST Configuration Table group | |
| 1.3.111.2.802.1.1.6.2.1.7 | Groupieee8021MstpConfigIdGroup | current | Objects for the MST Configuration Identifier group | |
| 1.3.111.2.802.1.1.6.2.1.8 | Groupieee8021MstpCistPortExtensionGroup | current | Objects for the CIST Port Extension group for fragile Bridges | |
| 1.3.111.2.802.1.1.6.2.1.9 | Groupieee8021MstpFidToMstiV2Group | current | Objects for the MST FID to MSTID Allocation Table group for SPB | |
| 1.3.111.2.802.1.1.6.2.1.10 | Groupieee8021MstpVlanV2Group | current | Objects for the MST Configuration Table group for SPB | |
| 1.3.111.2.802.1.1.6.2.2 | Nodeieee8021MstpCompliances | |||
| 1.3.111.2.802.1.1.6.2.2.1 | Complianceieee8021MstpCompliance | deprecated | The compliance statement for devices supporting Multiple Spanning Tree as defined in 13 of IEEE Std 802.1Q. | |
| 1.3.111.2.802.1.1.6.2.2.2 | Complianceieee8021MstpComplianceV2 | current | The compliance statement for devices supporting Multiple Spanning Tree as defined in 13 of IEEE Std 802.1Q. |