MIB Viewer

IEEE8021-SPB-MIB

141 objects
802.1 SPB MIB
Imported Objects
IEEE8021-TC-MIBIEEE8021BridgePortNumber IEEE8021PbbIngressEgress ieee802dot1mibs
IF-MIBInterfaceIndexOrZero
Q-BRIDGE-MIBVlanId VlanIdOrAny VlanIdOrNone
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.111.2.802.1.1.26Identityieee8021SpbMib802.1 SPB MIB
1.3.111.2.802.1.1.26.1Nodeieee8021SpbObjects
1.3.111.2.802.1.1.26.1.1Nodeieee8021SpbSys
1.3.111.2.802.1.1.26.1.1.1Scalarieee8021SpbSysAreaAddressread-writecurrentThe three byte IS-IS Area Address to join. Normally SPB will use area 00:00:00 however if SPB is being used in conjunction with IPV4/V6 it may operate using th…
1.3.111.2.802.1.1.26.1.1.2Scalarieee8021SpbSysIdread-writecurrentSYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. This is defaulted to the Bridge Address initially but may be overr…
1.3.111.2.802.1.1.26.1.1.3Scalarieee8021SpbSysControlAddrread-writecurrentGroup MAC that the ISIS control plane will use. SPB may use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.1.5 and Table 8-…
1.3.111.2.802.1.1.26.1.1.4Scalarieee8021SpbSysNameread-onlycurrentName to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management.
1.3.111.2.802.1.1.26.1.1.5Scalarieee8021SpbSysBridgePriorityread-onlycurrentThis is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its im…
1.3.111.2.802.1.1.26.1.1.6Scalarieee8021SpbmSysSPSourceIdread-writecurrentThe Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bit…
1.3.111.2.802.1.1.26.1.1.7Scalarieee8021SpbvSysModeread-writecurrentIndication of supporting SPBV mode auto(=1)/manual(=2) auto => enable SPBV mode and auto allocate SPVIDs. manual => enable SPBV mode and manually assign SPVIDs…
1.3.111.2.802.1.1.26.1.1.8Scalarieee8021SpbmSysModeread-writecurrentIndication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SP…
1.3.111.2.802.1.1.26.1.1.9Scalarieee8021SpbSysDigestConventionread-writecurrentThe Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block…
1.3.111.2.802.1.1.26.1.2Tableieee8021SpbMtidStaticTablenot-accessiblecurrentA Table of multiple logical topologies - MT.
1.3.111.2.802.1.1.26.1.2.1Rowieee8021SpbMtidStaticTableEntrynot-accessiblecurrentThis table configures a MTID to a topology index. A topology index uniquely identifies a specific ISIS topology enabling multiple instances or multiple MTIDs w…
1.3.111.2.802.1.1.26.1.2.1.1Columnieee8021SpbMtidStaticEntryMtidnot-accessiblecurrentISIS Multi Topology Identifier MTID Each MTID defines logical topology and is used to enable multiple SPB instances within one ISIS instance.
1.3.111.2.802.1.1.26.1.2.1.2Columnieee8021SpbMTidStaticEntryMtidOverloadread-createcurrentWhen set for this logical topology this bridge can only originate or terminate traffic. It cannot transit SPB encapsulated traffic. This is the IS-IS overload …
1.3.111.2.802.1.1.26.1.2.1.3Columnieee8021SpbMtidStaticEntryRowStatusread-createcurrentThe object indicates the status of an entry, and is used to create/delete entries. This object is persistent. This object is persistent.
1.3.111.2.802.1.1.26.1.2.1.4Columnieee8021SpbTopIxnot-accessiblecurrentUnique identifier of this SPB topology This is index is allocated for this ISIS/MT instance. It is used as an index to most other SPB tables below and to selec…
1.3.111.2.802.1.1.26.1.3Tableieee8021SpbTopIxDynamicTablenot-accessiblecurrentThis table is for SPB dynamic information. The dynamic information that is sent in this bridges Hellos.
1.3.111.2.802.1.1.26.1.3.1Rowieee8021SpbTopIxDynamicTableEntrynot-accessiblecurrentThis table displays the digest information computed for this bridge. A bridge configures this information in MTID 0 only.
1.3.111.2.802.1.1.26.1.3.1.1Columnieee8021SpbTopIxDynamicEntryTopIxnot-accessiblecurrentISIS-SPB Topology Index identifier Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
1.3.111.2.802.1.1.26.1.3.1.2Columnieee8021SpbTopIxDynamicEntryAgreeDigestread-onlycurrentThe topology agreement digest value. Digest of all topology information, as in clause 28.4.
1.3.111.2.802.1.1.26.1.3.1.3Columnieee8021SpbTopIxDynamicEntryMCIDread-onlycurrentThe MST Identifier MCID. The MCID is a digest of the VID to MSTID configuration table which determines the Base VIDs enabled for SPBV and SPBM.
1.3.111.2.802.1.1.26.1.3.1.4Columnieee8021SpbTopIxDynamicEntryAuxMCIDread-onlycurrentThe aux MST Identifier for migration. Either MCID or AuxMCID must match for adjacency to form.
1.3.111.2.802.1.1.26.1.4Tableieee8021SpbEctStaticTablenot-accessiblecurrentThe Equal Cost Tree (ECT) static configuration table.
1.3.111.2.802.1.1.26.1.4.1Rowieee8021SpbEctStaticTableEntrynot-accessiblecurrentThe Equal Cost Tree static configuration Table defines the ECT-ALGORITHM for the Base VID and if SPBV is used for the SPVID.
1.3.111.2.802.1.1.26.1.4.1.1Columnieee8021SpbEctStaticEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.4.1.2Columnieee8021SpbEctStaticEntryBaseVidnot-accessiblecurrentBase VID to use for this ECT-ALGORITHM. Traffic B-VID (SPBM) or Management VID (SPBV). A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB …
1.3.111.2.802.1.1.26.1.4.1.3Columnieee8021SpbEctStaticEntryEctAlgorithmread-createcurrentThis identifies the tie-breaking algorithms used in Shortest Path Tree computation. Values range from 00-80-c2-01 to 00-80-c2-16 for 802.1 for each the 16 ECT …
1.3.111.2.802.1.1.26.1.4.1.4Columnieee8021SpbvEctStaticEntrySpvidread-createcurrentIf SPBV mode this is the VID originating from this bridge. This input is ignored if ieee8021SpbvSysMode is auto(1), but the output always returns the SPVID in …
1.3.111.2.802.1.1.26.1.4.1.5Columnieee8021SpbEctStaticEntryRowStatusread-createcurrentThe object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
1.3.111.2.802.1.1.26.1.5Tableieee8021SpbEctDynamicTablenot-accessiblecurrentA table containing Data about the ECT behavior on this bridge
1.3.111.2.802.1.1.26.1.5.1Rowieee8021SpbEctDynamicTableEntrynot-accessiblecurrentThis table can be used to check that neighbor bridges are using the same ECT Algorithm.
1.3.111.2.802.1.1.26.1.5.1.1Columnieee8021SpbEctDynamicEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.5.1.2Columnieee8021SpbEctDynamicEntryBaseVidnot-accessiblecurrentThe Base VID being queried. Base VID define the mode in the VID to MSTID table.
1.3.111.2.802.1.1.26.1.5.1.3Columnieee8021SpbEctDynamicEntryModeread-onlycurrentThe Operating mode of this Base VID. SPBM (=2), SPBV (=3), or disabled or none (1).
1.3.111.2.802.1.1.26.1.5.1.4Columnieee8021SpbEctDynamicEntryLocalUseread-onlycurrentThis value indicates the ECT is in use locally (True/False) for this Base Vid. ECTs may be defined before services are assigned.
1.3.111.2.802.1.1.26.1.5.1.5Columnieee8021SpbEctDynamicEntryRemoteUseread-onlycurrentThis value indicates the remote ECT is in use (True/False) for this Base Vid. ECTs may be defined before services are assigned.
1.3.111.2.802.1.1.26.1.5.1.6Columnieee8021SpbEctDynamicEntryIngressCheckDiscardsread-onlycurrentThe number of SA check failures on this ECT VID This is referred to as the ingress check and this counter increments whenever a packet is discarded for this VI…
1.3.111.2.802.1.1.26.1.6Tableieee8021SpbAdjStaticTablenot-accessiblecurrentA table containing the SPB configuration data for a neighbor
1.3.111.2.802.1.1.26.1.6.1Rowieee8021SpbAdjStaticTableEntrynot-accessiblecurrentThis table can be used to display the interfaces and metrics of a neighbor bridge.
1.3.111.2.802.1.1.26.1.6.1.1Columnieee8021SpbAdjStaticEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.6.1.2Columnieee8021SpbAdjStaticEntryIfIndexnot-accessiblecurrentThe System interface/index which defines this adjacency. A value of 0 is a wildcard for any interface on which SPB Operation is supported.
1.3.111.2.802.1.1.26.1.6.1.3Columnieee8021SpbAdjStaticEntryMetricread-createcurrentThe ieee8021Spb metric (incremental cost) to this peer. The contribution of this link to total path cost. Recommended values are inversely proportional to link…
1.3.111.2.802.1.1.26.1.6.1.4Columnieee8021SpbAdjStaticEntryIfAdminStateread-createcurrentThe administrative state of this interface/port. Up is the default. This object is persistent.
1.3.111.2.802.1.1.26.1.6.1.5Columnieee8021SpbAdjStaticEntryRowStatusread-createcurrentThe object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
1.3.111.2.802.1.1.26.1.7Tableieee8021SpbAdjDynamicTablenot-accessiblecurrentThe SPB neighbor dynamic information table.
1.3.111.2.802.1.1.26.1.7.1Rowieee8021SpbAdjDynamicTableEntrynot-accessiblecurrentThis table is used to determine operational values of digests and interfaces of neighbor bridges.
1.3.111.2.802.1.1.26.1.7.1.1Columnieee8021SpbAdjDynamicEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.7.1.2Columnieee8021SpbAdjDynamicEntryIfIndexnot-accessiblecurrentSystem interface/index which defines this adjacency A value of 0 is a wildcard for any interface on which SPB Operation is enabled.
1.3.111.2.802.1.1.26.1.7.1.3Columnieee8021SpbAdjDynamicEntryPeerSysIdnot-accessiblecurrentThe SPB System Identifier of this peer. This is used to identify a neighbor uniquely.
1.3.111.2.802.1.1.26.1.7.1.4Columnieee8021SpbAdjDynamicEntryPortread-onlycurrentThe port number to reach this adjacency.
1.3.111.2.802.1.1.26.1.7.1.5Columnieee8021SpbAdjDynamicEntryIfOperStateread-onlycurrentThe operational state of this port. up, down or testing (in test).
1.3.111.2.802.1.1.26.1.7.1.6Columnieee8021SpbAdjDynamicEntryPeerSysNameread-onlycurrentIS-IS system name of peer. This is the ASCII name assigned to the bridge to aid management. It is the same as the ieee8021SpbSysName.
1.3.111.2.802.1.1.26.1.7.1.7Columnieee8021SpbAdjDynamicEntryPeerAgreeDigestread-onlycurrentThe peer topology agreement digest value (all of the elements defined in clause 28.4). If it does not match this bridge's digest it indicates loss of synchroni…
1.3.111.2.802.1.1.26.1.7.1.8Columnieee8021SpbAdjDynamicEntryPeerMCIDread-onlycurrentThe peer MST Identifier MCID. The MCID is a digest of the VID to MSTID configuration table which determines the Base VIDs enabled for SPBV and SPBM.
1.3.111.2.802.1.1.26.1.7.1.9Columnieee8021SpbAdjDynamicEntryPeerAuxMCIDread-onlycurrentThe peer auxiliary MST Identifier. This MCID is used for migration.
1.3.111.2.802.1.1.26.1.7.1.10Columnieee8021SpbAdjDynamicEntryLocalCircuitIDread-onlycurrentThe value used by IS-IS to identify this adjacency locally.
1.3.111.2.802.1.1.26.1.7.1.11Columnieee8021SpbAdjDynamicEntryPeerLocalCircuitIDread-onlycurrentThe value used by peer IS-IS to identify this adjacency remotely.
1.3.111.2.802.1.1.26.1.7.1.12Columnieee8021SpbAdjDynamicEntryPortIdentifierread-onlycurrentThe value for this bridge which has been selected by IS-IS to form this adjacency if there is more than 1 candidate link.
1.3.111.2.802.1.1.26.1.7.1.13Columnieee8021SpbAdjDynamicEntryPeerPortIdentifierread-onlycurrentThe value for peer port Identifier selected by IS-IS to form this adjacency if there is more than 1 candidate link.
1.3.111.2.802.1.1.26.1.7.1.14Columnieee8021SpbAdjDynamicEntryIsisCircIndexread-onlycurrentThe isisCircTable reference. This allows cross referencing to an IS-IS MIB.
1.3.111.2.802.1.1.26.1.8Tableieee8021SpbTopNodeTablenot-accessiblecurrentTable of network specific bridge information.
1.3.111.2.802.1.1.26.1.8.1Rowieee8021SpbTopNodeTableEntrynot-accessiblecurrentThis table is used to display system level information about bridges in the network.
1.3.111.2.802.1.1.26.1.8.1.1Columnieee8021SpbTopNodeEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.8.1.2Columnieee8021SpbTopNodeEntrySysIdnot-accessiblecurrentThe IS-IS System ID of a bridge in the SPB LSP database and hence the network. A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.8.1.3Columnieee8021SpbTopNodeEntryBridgePriorityread-onlycurrentThe Bridge Priority of the bridge in the LSP database. This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priori…
1.3.111.2.802.1.1.26.1.8.1.4Columnieee8021SpbmTopNodeEntrySPsourceIDread-onlycurrentThe Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bit…
1.3.111.2.802.1.1.26.1.8.1.5Columnieee8021SpbTopNodeEntrySysNameread-onlycurrentThe System Name. A Human readable name of this bridge This is used to aid in management and is used in place of the System identifier in many commands and disp…
1.3.111.2.802.1.1.26.1.9Tableieee8021SpbTopEctTablenot-accessiblecurrentTable of all ECT use in the network
1.3.111.2.802.1.1.26.1.9.1Rowieee8021SpbTopEctTableEntrynot-accessiblecurrentThis table lists bridges and the ECT Algorithms configured and in use.
1.3.111.2.802.1.1.26.1.9.1.1Columnieee8021SpbTopEctEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.9.1.2Columnieee8021SpbTopEctEntrySysIdnot-accessiblecurrentThe system ID which is using a particular ECT. A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.9.1.3Columnieee8021SpbTopEctEntryBaseVidnot-accessiblecurrentBase VID related to this algorithm In the case of SPBM this is the B-VID that carries traffic for this ECT-ALGORITHM. In the case of SPBV this is the Base-VID …
1.3.111.2.802.1.1.26.1.9.1.4Columnieee8021SpbTopEctEntryEctAlgorithmread-onlycurrentThe ECT-ALGORITHM in use. A 32 bit number. The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and …
1.3.111.2.802.1.1.26.1.9.1.5Columnieee8021SpbTopEctEntryModeread-onlycurrentOperating mode : SPBM (=2) or SPBV (=3)
1.3.111.2.802.1.1.26.1.9.1.6Columnieee8021SpbvTopEctSysModeread-onlycurrentIndication of supporting SPBV mode auto(=1)/manual(=2) auto => SPBV mode and auto allocate SPVIDs. manual => SPBV mode and manually assign SPVIDs.
1.3.111.2.802.1.1.26.1.9.1.7Columnieee8021SpbvTopEctEntrySpvidread-onlycurrentSPVID in V mode The VID this bridge will use to originate traffic using this ECT-ALGORITHM when running in SPBV mode.
1.3.111.2.802.1.1.26.1.9.1.8Columnieee8021SpbTopEctEntryLocalUseread-onlycurrentIs this ECT-ALGORITHM in use locally by advertising bridge :- TRUE or FALSE. This is used to help with disruption-free migration between ECT-ALGORITHMs. Change…
1.3.111.2.802.1.1.26.1.10Tableieee8021SpbTopEdgeTablenot-accessiblecurrentA Table of edges in network (not duplicated), but each link will appear as two entries, one ordered {near-far}, the other {far-near}.
1.3.111.2.802.1.1.26.1.10.1Rowieee8021SpbTopEdgeTableEntrynot-accessiblecurrentThe table lists information about bridge edges (links).
1.3.111.2.802.1.1.26.1.10.1.1Columnieee8021SpbTopEdgeEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.10.1.2Columnieee8021SpbTopEdgeEntrySysIdNearnot-accessiblecurrentThe System ID of near bridge (the bridge reporting the adjacency). A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.10.1.3Columnieee8021SpbTopEdgeEntrySysIdFarnot-accessiblecurrentThe System ID of far bridge (the neighbor of the bridge reporting). A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.10.1.4Columnieee8021SpbTopEdgeEntryMetricNear2Farread-onlycurrentThe metric used on this edge advertised by near end This is the raw value. If it is less than the MetricFar2Near (below), the MetricFar2Near is used as the SPF…
1.3.111.2.802.1.1.26.1.10.1.5Columnieee8021SpbTopEdgeEntryMetricFar2Nearread-onlycurrentThe metric used on this edge advertised by far end This is the raw value. If it is less than the MetricNear2Far (above), the MetricNear2Far is used as the SPF …
1.3.111.2.802.1.1.26.1.11Tableieee8021SpbmTopSrvTablenot-accessiblecurrentAll SPBM PBB encapsulated services in this network.
1.3.111.2.802.1.1.26.1.11.1Rowieee8021SpbmTopSrvTableEntrynot-accessiblecurrentThis table displays information about PBB services received in the LSP data base. The Service Identifier is associated with the MAC address and Base VID of the…
1.3.111.2.802.1.1.26.1.11.1.1Columnieee8021SpbmTopSrvEntryTopIxnot-accessiblecurrentEntry of one The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB…
1.3.111.2.802.1.1.26.1.11.1.2Columnieee8021SpbmTopSrvEntrySysIdnot-accessiblecurrentThe System identifier this service originates/terminates on. A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.11.1.3Columnieee8021SpbmTopSrvEntryIsidnot-accessiblecurrentAn ISID (service) originating/terminating on this bridge. A value of 0 is a wildcard for any ISID.
1.3.111.2.802.1.1.26.1.11.1.4Columnieee8021SpbmTopSrvEntryBaseVidnot-accessiblecurrentThe Base VID associated with this service. The Base VID determines the ECT Algorithm that is associated with this service. A Base VID value of 4095 is a wildca…
1.3.111.2.802.1.1.26.1.11.1.5Columnieee8021SpbmTopSrvEntryMacnot-accessiblecurrentThe MAC address associated with a service. An additional nodal MAC address by which an I-SID can be reached may be advertised, in which case traffic to this MA…
1.3.111.2.802.1.1.26.1.11.1.6Columnieee8021SpbmTopSrvEntryIsidFlagsread-onlycurrentA pair of flags defining the attributes of this service. These specify independently whether ingress frames to the SPBM region should be transmitted within it,…
1.3.111.2.802.1.1.26.1.12Tableieee8021SpbvTopSrvTablenot-accessiblecurrentThe SPBV group services in this network
1.3.111.2.802.1.1.26.1.12.1Rowieee8021SpbvTopSrvTableEntrynot-accessiblecurrentThis table displays information about SPBV group address. The group address is a associated with MAC address and Base VID of the bridge that originates or term…
1.3.111.2.802.1.1.26.1.12.1.1Columnieee8021SpbvTopSrvEntryTopIxnot-accessiblecurrentThe ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances wi…
1.3.111.2.802.1.1.26.1.12.1.2Columnieee8021SpbvTopSrvEntrySysIdnot-accessiblecurrentThe System identifier advertising this group address. A value of 0 is a wildcard for all System identifiers.
1.3.111.2.802.1.1.26.1.12.1.3Columnieee8021SpbvTopSrvEntryMMacnot-accessiblecurrentThis Group MAC address entry. A value of 0 is a wildcard for any Group MAC address.
1.3.111.2.802.1.1.26.1.12.1.4Columnieee8021SpbvTopSrvEntryBaseVidread-onlycurrentThe Base VID associated with this service. The Base VID determines the ECT Algorithm that is associated with this service.
1.3.111.2.802.1.1.26.1.12.1.5Columnieee8021SpbvTopSrvEntryMMacFlagsread-onlycurrentA pair of {ingress, egress} flags for this Group Address, defining transmit/receive or both. This enables filtering of Group addresses to interwork with MMRP.
1.3.111.2.802.1.1.26.2Nodeieee8021SpbConformance
1.3.111.2.802.1.1.26.2.1Nodeieee8021SpbGroups
1.3.111.2.802.1.1.26.2.1.1Groupieee8021SpbSysGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbSys
1.3.111.2.802.1.1.26.2.1.2Groupieee8021SpbMtidStaticTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbMtidStaticTable
1.3.111.2.802.1.1.26.2.1.3Groupieee8021SpbTopIxDynamicTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbTopIxDynamicTable
1.3.111.2.802.1.1.26.2.1.4Groupieee8021SpbEctStaticTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbEctStaticTable
1.3.111.2.802.1.1.26.2.1.5Groupieee8021SpbEctDynamicTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbEctDynamicTable
1.3.111.2.802.1.1.26.2.1.6Groupieee8021SpbAdjStaticTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbAdjStaticTable
1.3.111.2.802.1.1.26.2.1.7Groupieee8021SpbAdjDynamicTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbAdjDynamicTable
1.3.111.2.802.1.1.26.2.1.8Groupieee8021SpbTopNodeTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbTopNodeTable
1.3.111.2.802.1.1.26.2.1.9Groupieee8021SpbTopEctTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbTopEctTable
1.3.111.2.802.1.1.26.2.1.10Groupieee8021SpbTopEdgeTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbTopEdgeTable
1.3.111.2.802.1.1.26.2.1.11Groupieee8021SpbmTopSrvTableGroupSPBMcurrentThe collection of objects used to represent ieee8021SpbmTopSrvTable
1.3.111.2.802.1.1.26.2.1.12Groupieee8021SpbSysGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbSys
1.3.111.2.802.1.1.26.2.1.13Groupieee8021SpbMtidStaticTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbMtidStaticTable
1.3.111.2.802.1.1.26.2.1.14Groupieee8021SpbTopIxDynamicTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbTopIxDynamicTable
1.3.111.2.802.1.1.26.2.1.15Groupieee8021SpbEctStaticTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbEctStaticTable
1.3.111.2.802.1.1.26.2.1.16Groupieee8021SpbEctDynamicTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbEctDynamicTable
1.3.111.2.802.1.1.26.2.1.17Groupieee8021SpbAdjStaticTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbAdjStaticTable
1.3.111.2.802.1.1.26.2.1.18Groupieee8021SpbAdjDynamicTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbAdjDynamicTable
1.3.111.2.802.1.1.26.2.1.19Groupieee8021SpbTopNodeTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbTopNodeTable
1.3.111.2.802.1.1.26.2.1.20Groupieee8021SpbTopEctTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbTopEctTable
1.3.111.2.802.1.1.26.2.1.21Groupieee8021SpbTopEdgeTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbTopEdgeTable
1.3.111.2.802.1.1.26.2.1.22Groupieee8021SpbvTopSrvTableGroupSPBVcurrentThe collection of objects used to represent ieee8021SpbvTopSrvTable
1.3.111.2.802.1.1.26.2.2Nodeieee8021SpbCompliances
1.3.111.2.802.1.1.26.2.2.1Complianceieee8021SpbComplianceSPBMcurrentCompliance to IEEE 802.1 SPBM mode
1.3.111.2.802.1.1.26.2.2.2Complianceieee8021SpbComplianceSPBVcurrentCompliance to IEEE 802.1 SPBV mode
Type Definitions
NameSyntaxStatusDescription
IEEE8021SpbAdjStateINTEGER { up(1), down(2), testing(3) }currentThe current state of this SPB adjacency or port. The values are up, down, and testing.
IEEE8021SpbAreaAddressOCTET STRING (SIZE(3))currentThis identifier is the 3 Byte IS-IS Area Address. Domain Specific part(DSP).
IEEE8021SpbBridgePriorityOCTET STRING (SIZE(2))currentThe Bridge priority is the top 2 bytes of the Bridge Identifier. Lower values represent a better priority.
IEEE8021SpbDigestOCTET STRING (SIZE(32))currentThe Topology Agreement digest hex string.
IEEE8021SpbDigestConventionINTEGER { off(1), loopFreeBoth(2), loopFreeMcastOnly(3) }currentThe mode of the current Agreement Digest. This determines the level of loop prevention.
IEEE8021SpbEctAlgorithmOCTET STRING (SIZE(4))currentThe 4 byte Equal Cost Multiple Tree Algorithm identifier. This identifies the tree computation algorithm and tie breakers.
IEEE8021SpbEctModeINTEGER { disabled(1), spbm(2), spbv(3) }currentThe mode of the Base VID assigned for this instance of SPB. Modes are assigned in the FID to MSTI Allocation table.
IEEE8021SpbLinkMetricInteger32(1..16777215)currentThe 24 bit cost of an SPB link. A lower metric value means better. Value 16777215 equals Infinity.
IEEE8021SpbMCIDOCTET STRING (SIZE(51))currentMST Configuration Identifier digest hex string.
IEEE8021SpbModeINTEGER { auto(1), manual(2) }currentAuto allocation control for this instance of SPB. For SPBV it controls SPVIDs and for SPBM it controls SPSourceID.
IEEE8021SpbmSPsourceIdOCTET STRING (SIZE(3))currentIt is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID.
IEEE8021SpbMTIDUnsigned32currentThe IS-IS Multi Topology Identifier.
IEEE8021SpbServiceIdentifierOrAnyUnsigned32 (255..16777215)currentThe service instance identifier is used at the Customer Backbone port in SPBM to distinguish a service instance. The special value of 0xFFFFFF is used for wildcard. This range also includes the default I-SID.
MIB Viewer