IEEE8021-SRP-MIB
55 objects
The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
Imported Objects
| BRIDGE-MIB | BridgeId |
| IEEE8021-BRIDGE-MIB | ieee8021BridgeBaseComponentId ieee8021BridgeBaseEntry ieee8021BridgeBasePort ieee8021BridgeBasePortEntry |
| IEEE8021-FQTSS-MIB | IEEE8021FqtssTrafficClassValue |
| IEEE8021-TC-MIB | IEEE8021PriorityCodePoint IEEE8021VlanIndex ieee802dot1mibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.111.2.802.1.1.19 | Identityieee8021SrpMib | The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol. Unless otherwise indicated, the references in this MIB… | ||
| 1.3.111.2.802.1.1.19.0 | Nodeieee8021SrpNotifications | |||
| 1.3.111.2.802.1.1.19.1 | Nodeieee8021SrpObjects | |||
| 1.3.111.2.802.1.1.19.1.1 | Nodeieee8021SrpConfiguration | |||
| 1.3.111.2.802.1.1.19.1.1.1 | Tableieee8021SrpBridgeBaseTable | not-accessible | current | A table for SRP main control and status information. All writeable objects in this table must be persistent over power up restart/reboot. These objects augment… |
| 1.3.111.2.802.1.1.19.1.1.1.1 | Rowieee8021SrpBridgeBaseEntry | not-accessible | current | SRP control and status information for a Bridge. |
| 1.3.111.2.802.1.1.19.1.1.1.1.1 | Columnieee8021SrpBridgeBaseMsrpEnabledStatus | read-create | current | The administrative status requested by management for MSRP. The value true(1) indicates that MSRP should be enabled on this device, in all VLANs, on all ports … |
| 1.3.111.2.802.1.1.19.1.1.1.1.2 | Columnieee8021SrpBridgeBaseMsrpTalkerPruning | read-create | current | The value of the talkerPruning parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are only dec… |
| 1.3.111.2.802.1.1.19.1.1.1.1.3 | Columnieee8021SrpBridgeBaseMsrpMaxFanInPorts | read-create | current | The value of the msrpMaxFanInPorts parameter which limits the total number of ports on a Bridge that are allowed to establish reservations for inbound Streams.… |
| 1.3.111.2.802.1.1.19.1.1.1.1.4 | Columnieee8021SrpBridgeBaseMsrpLatencyMaxFrameSize | read-create | current | The value of msrpLatencyMaxFrameSize parameter which is used in the calculation of the maximum latency through a Bridge. The maximum size is defined to be 2000… |
| 1.3.111.2.802.1.1.19.1.1.2 | Tableieee8021SrpBridgePortTable | not-accessible | current | A table for SRP control and status information about every Bridge Port. Augments the ieee8021BridgeBasePortTable. |
| 1.3.111.2.802.1.1.19.1.1.2.1 | Rowieee8021SrpBridgePortEntry | not-accessible | current | SRP control and status information for a Bridge Port. |
| 1.3.111.2.802.1.1.19.1.1.2.1.1 | Columnieee8021SrpBridgePortMsrpEnabledStatus | read-create | current | The administrative state of MSRP operation on this port. The value true(1) indicates that MSRP is enabled on this port in all VLANs as long as ieee8021BridgeMs… |
| 1.3.111.2.802.1.1.19.1.1.2.1.2 | Columnieee8021SrpBridgePortMsrpFailedRegistrations | read-only | current | The total number of failed MSRP registrations, for any reason, in all VLANs, on this port. Discontinuities in the value of the counter can occur at re-initiali… |
| 1.3.111.2.802.1.1.19.1.1.2.1.3 | Columnieee8021SrpBridgePortMsrpLastPduOrigin | read-only | current | The Source MAC Address of the last MSRP message received on this port. |
| 1.3.111.2.802.1.1.19.1.1.2.1.4 | Columnieee8021SrpBridgePortSrPvid | read-create | current | The default VLAN ID that Streams are assigned to. Talkers learn this VID from the SRP Domain attribute and tag Streams accordingly. The value of this object MU… |
| 1.3.111.2.802.1.1.19.1.2 | Nodeieee8021SrpLatency | |||
| 1.3.111.2.802.1.1.19.1.2.1 | Tableieee8021SrpLatencyTable | not-accessible | current | A table containing a set of latency measurement parameters for each traffic class. |
| 1.3.111.2.802.1.1.19.1.2.1.1 | Rowieee8021SrpLatencyEntry | not-accessible | current | A list of objects containing latency information for each traffic class. Rows in the table are automatically created for ports that are not an SRP domain bound… |
| 1.3.111.2.802.1.1.19.1.2.1.1.1 | Columnieee8021SrpTrafficClass | not-accessible | current | The traffic class number associated with the row of the table. Rows in the table are automatically created for ports that are not an SRP domain boundary port (… |
| 1.3.111.2.802.1.1.19.1.2.1.1.2 | Columnieee8021SrpPortTcLatency | read-only | current | The value of the portTcMaxLatency parameter for the traffic class. This value is expressed in nano-seconds. |
| 1.3.111.2.802.1.1.19.1.3 | Nodeieee8021SrpStreams | |||
| 1.3.111.2.802.1.1.19.1.3.1 | Tableieee8021SrpStreamTable | not-accessible | current | A table containing a set of characteristics for each registered Stream. |
| 1.3.111.2.802.1.1.19.1.3.1.1 | Rowieee8021SrpStreamEntry | not-accessible | current | A list of objects containing characteristics for each registered Stream. Rows in the table are automatically created for Streams registered on any port of a Br… |
| 1.3.111.2.802.1.1.19.1.3.1.1.1 | Columnieee8021SrpStreamId | not-accessible | current | The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP. |
| 1.3.111.2.802.1.1.19.1.3.1.1.2 | Columnieee8021SrpStreamDestinationAddress | read-only | current | The MAC destination address for the Stream described by this reservation. |
| 1.3.111.2.802.1.1.19.1.3.1.1.3 | Columnieee8021SrpStreamVlanId | read-only | current | The VLAN ID associated with the MSRP registration for this Stream. |
| 1.3.111.2.802.1.1.19.1.3.1.1.4 | Columnieee8021SrpStreamTspecMaxFrameSize | read-only | current | The maximum size frame that will be sent by a Talker for this Stream. This value is part of the Traffic Specification for the Stream. |
| 1.3.111.2.802.1.1.19.1.3.1.1.5 | Columnieee8021SrpStreamTspecMaxIntervalFrames | read-only | current | The maximum number of frame that will be sent during a class measurement interval (L.2). This value is part of the Traffic Specification for the Stream. |
| 1.3.111.2.802.1.1.19.1.3.1.1.6 | Columnieee8021SrpStreamDataFramePriority | read-only | current | The Priority Code Point (PCP) value that the referenced Stream will be tagged with. This value is used to distinguish Class A and Class B traffic. |
| 1.3.111.2.802.1.1.19.1.3.1.1.7 | Columnieee8021SrpStreamRank | read-only | current | SRP supports emergency and non-emergency. Emergency traffic will interrupt non-emergency traffic if there is insufficient bandwidth or resources available for … |
| 1.3.111.2.802.1.1.19.1.4 | Nodeieee8021SrpReservations | |||
| 1.3.111.2.802.1.1.19.1.4.1 | Tableieee8021SrpReservationsTable | not-accessible | current | A table containing Stream attribute registrations per port. |
| 1.3.111.2.802.1.1.19.1.4.1.1 | Rowieee8021SrpReservationsEntry | not-accessible | current | A list of objects containing Stream attribute registrations per port. Rows in the table are automatically created for Streams registered on any port of a Bridg… |
| 1.3.111.2.802.1.1.19.1.4.1.1.1 | Columnieee8021SrpReservationStreamId | not-accessible | current | The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP. |
| 1.3.111.2.802.1.1.19.1.4.1.1.2 | Columnieee8021SrpReservationDirection | not-accessible | current | The source of this Stream registration, either Talker or Listener. |
| 1.3.111.2.802.1.1.19.1.4.1.1.3 | Columnieee8021SrpReservationDeclarationType | read-only | current | The type of Talker or Listener registration. |
| 1.3.111.2.802.1.1.19.1.4.1.1.4 | Columnieee8021SrpReservationAccumulatedLatency | read-only | current | The Accumulated Latency associated with the current registration. For Talker registrations this represents the accumulated latency from the Talker to the ingre… |
| 1.3.111.2.802.1.1.19.1.4.1.1.5 | Columnieee8021SrpReservationFailureBridgeId | read-only | current | The first Bridge that changes a Talker Advertise to a Talker Failed registration will report its Bridge Identification in this field. That single Bridge Identi… |
| 1.3.111.2.802.1.1.19.1.4.1.1.6 | Columnieee8021SrpReservationFailureCode | read-only | current | The first Bridge that changes a Talker Advertise to a Talker Failed registration will report the Failure Code in this field. That single Failure Code is then p… |
| 1.3.111.2.802.1.1.19.1.4.1.1.7 | Columnieee8021SrpReservationDroppedStreamFrames | read-only | current | A count of the number of data stream frames that have been dropped for whatever reason. These are not MSRP frames, but the stream data frames that are carried … |
| 1.3.111.2.802.1.1.19.1.4.1.1.8 | Columnieee8021SrpReservationStreamAge | read-only | current | The number of seconds since the reservation was established on this port. |
| 1.3.111.2.802.1.1.19.2 | Nodeieee8021SrpConformance | |||
| 1.3.111.2.802.1.1.19.2.1 | Nodeieee8021SrpCompliances | |||
| 1.3.111.2.802.1.1.19.2.1.1 | Complianceieee8021SrpCompliance | current | The compliance statement for devices supporting Stream Reservation Protocol. Support of the objects defined in the IEEE8021-SRP MIB also requires support of th… | |
| 1.3.111.2.802.1.1.19.2.2 | Nodeieee8021SrpGroups | |||
| 1.3.111.2.802.1.1.19.2.2.1 | Groupieee8021SrpConfigurationGroup | current | Objects that define configuration of SRP. | |
| 1.3.111.2.802.1.1.19.2.2.2 | Groupieee8021SrpLatencyGroup | current | Objects that define latency for SRP. | |
| 1.3.111.2.802.1.1.19.2.2.3 | Groupieee8021SrpStreamsGroup | current | Objects that define Streams for SRP. | |
| 1.3.111.2.802.1.1.19.2.2.4 | Groupieee8021SrpReservationsGroup | current | Objects that define Stream Reservations for SRP. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IEEE8021SrpReservationDeclarationTypeValue | INTEGER { talkerAdvertise(0), talkerFailed(1), listenerAskingFailed(2), listenerReady(3), listenerReadyFailed(4) } | current | An 802.1 SRP Stream Reservation Declaration Type value. This is an integer, with the following interpretation placed on the value: 0: Talker Advertise, 1: Talker Failed, 2: Listener Asking Failed, 3: Listener Ready, 4: … |
| IEEE8021SrpReservationDirectionValue | INTEGER { talkerRegistrations(0), listenerRegistrations(1) } | current | An 802.1 SRP Stream Reservation Direction value. This is an integer, with the following interpretation placed on the value: 0: Talker registrations, 1: Listener registrations. |
| IEEE8021SrpReservationFailureCodeValue | INTEGER { noFailure(0), insufficientBandwidth(1), insufficientResources(2), insufficientTrafficClassBandwidth(3), streamIDInUse(4), streamDestinationAddressInUse(5), streamPreemptedByHigherRank(6), latencyHasChanged(7), egressPortNotAVBCapable(8), useDifferentDestinationAddress(9), outOfMSRPResources(10), outOfMMRPResources(11), cannotStoreDestinationAddress(12), priorityIsNoAnSRCLass(13), maxFrameSizeTooLarge(14), maxFanInPortsLimitReached(15), firstValueChangedForStreamID(16), vlanBlockedOnEgress(17), vlanTaggingDisabledOnEgress(18), srClassPriorityMismatch(19) } | current | An 802.1 SRP Stream Reservation Failure Code value. This is an integer, with the following interpretation placed on the value: 0: No failure, 1: Insufficient bandwidth, 2: Insufficient Bridge resources, 3: Insufficient … |
| IEEE8021SrpStreamIdValue | OCTET STRING (SIZE (8)) | current | Represents an SRP Stream ID, which is often defined as a MAC Address followed by a unique 16-bit ID. |
| IEEE8021SrpStreamRankValue | INTEGER { emergency(0), nonEmergency(1) } | current | An 802.1 SRP Stream Rank value. This is an integer, with the following interpretation placed on the value: 0: Emergency, high-rank stream, 1: Non-emergency stream. |