IFT-SNMP-MIB
216 objects
Infortrend SNMP MIB
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1714 | Identityinfortrend | Infortrend SNMP MIB | ||
| 1.3.6.1.4.1.1714.1 | IdentityextInterface | current | MIB of Infortrend External Interface Protocol(Draft: 2.26) and Generalized Target Configuration Protocol(Draft: 1.33) | |
| 1.3.6.1.4.1.1714.1.1 | NodectlrConfiguration | |||
| 1.3.6.1.4.1.1714.1.1.1 | NodesysInformation | |||
| 1.3.6.1.4.1.1714.1.1.1.1 | ScalarcpuType | read-only | current | CPU type on RAID controller |
| 1.3.6.1.4.1.1714.1.1.1.2 | ScalarcacheSize | read-only | current | Cache size on RAID controller, in MB |
| 1.3.6.1.4.1.1714.1.1.1.3 | ScalarmemoryType | read-only | current | Cache memory type on RAID controller 0: FPG, 1: EDO, 2: SDRAM, 3: ECC SDRAM |
| 1.3.6.1.4.1.1714.1.1.1.4 | ScalarfwMajorVersion | read-only | current | Firmware major version |
| 1.3.6.1.4.1.1714.1.1.1.5 | ScalarfwMinorVersion | read-only | current | Firmware minor version |
| 1.3.6.1.4.1.1714.1.1.1.6 | ScalarfwEngineerVersion | read-only | current | Firmware engineer version |
| 1.3.6.1.4.1.1714.1.1.1.7 | ScalarbrMajorVersion | read-only | current | Bootrecord major version |
| 1.3.6.1.4.1.1714.1.1.1.8 | ScalarbrMinorVersion | read-only | current | Bootrecord minor version |
| 1.3.6.1.4.1.1714.1.1.1.9 | ScalarbrEngineerVersion | read-only | current | Bootrecord engineer version |
| 1.3.6.1.4.1.1714.1.1.1.10 | ScalarserialNum | read-only | current | Serial number |
| 1.3.6.1.4.1.1714.1.1.1.11 | ScalarctlrName | read-write | current | Controller name |
| 1.3.6.1.4.1.1714.1.1.1.12 | ScalarctlrCfgModeFlags | read-write | current | |
| 1.3.6.1.4.1.1714.1.1.1.13 | ScalarprivateLogoString | read-only | current | Private logo string |
| 1.3.6.1.4.1.1714.1.1.1.14 | ScalarprivateLogoVendor | read-only | current | Private logo vendor string |
| 1.3.6.1.4.1.1714.1.1.1.15 | ScalarprivateLogoModel | read-only | current | Private logo model string |
| 1.3.6.1.4.1.1714.1.1.1.16 | ScalarctlrUniqueID | read-write | current | Controller unique identifier |
| 1.3.6.1.4.1.1714.1.1.2 | NodecachingParams | |||
| 1.3.6.1.4.1.1714.1.1.2.1 | ScalarcacheModeFlags | read-only | current | |
| 1.3.6.1.4.1.1714.1.1.2.2 | ScalarcacheBlkSizeIdx | read-only | current | |
| 1.3.6.1.4.1.1714.1.1.2.3 | ScalarcacheTotal | read-only | current | Total number of cache blocks |
| 1.3.6.1.4.1.1714.1.1.2.4 | ScalarcacheDirty | read-only | current | Number of dirty cache blocks |
| 1.3.6.1.4.1.1714.1.1.3 | NodediskArrayParams | |||
| 1.3.6.1.4.1.1714.1.1.3.1 | ScalarmaxRebPriorityIdx | read-only | current | Maximum supported rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High |
| 1.3.6.1.4.1.1714.1.1.3.2 | ScalarminRebPriorityIdx | read-only | current | Minimum supported rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High |
| 1.3.6.1.4.1.1714.1.1.3.3 | ScalardefRebPriorityIdx | read-only | current | Default rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High |
| 1.3.6.1.4.1.1714.1.1.3.4 | ScalarcurRebPriorityIdx | read-only | current | Current rebuild priority index 0: Low, 1: Normal, 2: Improved, 3: High |
| 1.3.6.1.4.1.1714.1.1.3.5 | ScalarwriteVerifyModeFlags | read-only | current | |
| 1.3.6.1.4.1.1714.1.1.4 | NodehostSideParams | |||
| 1.3.6.1.4.1.1714.1.1.4.1 | ScalarmaxQueuedIOCnt | read-only | current | Maximum supported host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ). |
| 1.3.6.1.4.1.1714.1.1.4.2 | ScalarminQueuedIOCnt | read-only | current | Minimum supported host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ). |
| 1.3.6.1.4.1.1714.1.1.4.3 | ScalardefQueuedIOCnt | read-only | current | Default host queued I/O count == N (> 0) ==> Count = 2 ** ( N - 1 ). |
| 1.3.6.1.4.1.1714.1.1.4.4 | ScalarcurQueuedIOCnt | read-only | current | Current host queued I/O count == 0 - Automatically Computed. == N (> 0) ==> Count = 2 ** ( N - 1 ). |
| 1.3.6.1.4.1.1714.1.1.4.5 | ScalarmaxLunNum | read-only | current | Maximum LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 ) |
| 1.3.6.1.4.1.1714.1.1.4.6 | ScalarminLunNum | read-only | current | Minimum LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 ) |
| 1.3.6.1.4.1.1714.1.1.4.7 | ScalardefLunNum | read-only | current | Default LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 ) |
| 1.3.6.1.4.1.1714.1.1.4.8 | ScalarcurLunNum | read-only | current | Current LUNs per host SCSI ID(SCSI-to-SCSI only) == N ==> LUNs = 2 ** ( N - 1 ) |
| 1.3.6.1.4.1.1714.1.1.5 | NodedriveSideParams | |||
| 1.3.6.1.4.1.1714.1.1.5.1 | ScalarmodeFlags | read-only | current | |
| 1.3.6.1.4.1.1714.1.1.5.2 | ScalarmaxAccessDelayTime | read-only | current | Maximum time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds. |
| 1.3.6.1.4.1.1714.1.1.5.3 | ScalarminAccessDelayTime | read-only | current | Minimum time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds. |
| 1.3.6.1.4.1.1714.1.1.5.4 | ScalardefAccessDelayTime | read-only | current | Default time to delay prior to first disk access(in 5 seconds unit) == N ==> Delay = N * 5 seconds. |
| 1.3.6.1.4.1.1714.1.1.5.5 | ScalarcurAccessDelayTime | read-only | current | Current time to delay prior to first disk access(in 5 seconds unit) == 0 ==> No Delay. == N ==> Delay = N * 5 seconds. |
| 1.3.6.1.4.1.1714.1.1.5.6 | ScalarmaxTagCnt | read-only | current | Maximum drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| 1.3.6.1.4.1.1714.1.1.5.7 | ScalarminTagCnt | read-only | current | Minimum drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| 1.3.6.1.4.1.1714.1.1.5.8 | ScalardefTagCnt | read-only | current | Default drive-side SCSI tags per drive(Tags = 2**(N-1)) |
| 1.3.6.1.4.1.1714.1.1.5.9 | ScalarcurTagCnt | read-only | current | Current drive-side SCSI tags per drive(Tags = 2**(N-1), 0: Disabled) |
| 1.3.6.1.4.1.1714.1.1.5.10 | ScalardefIOTimeout | read-only | current | Default drive-side SCSI I/O timeout(in 10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.11 | ScalarcurIOTimeout | read-only | current | Current drive-side SCSI I/O timeout(in 10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.12 | ScalardefDrvChkPeriod | read-only | current | Default drive-side SCSI drive check period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.13 | ScalarcurDrvChkPeriod | read-only | current | Current drive-side SCSI drive check period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.14 | ScalardefSaftePollingPeriod | read-only | current | Default SAFTE polling period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.15 | ScalarcurSaftePollingPeriod | read-only | current | Current SAFTE polling period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.16 | ScalardefAutoDetectPeriod | read-only | current | Default auto-detect failed drive swaped check period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.5.17 | ScalarcurAutoDetectPeriod | read-only | current | Current auto-detect failed drive swaped check period(10ms units) |
| 1.3.6.1.4.1.1714.1.1.6 | NoderedundantParams | |||
| 1.3.6.1.4.1.1714.1.1.6.1 | ScalarredCtlrCfg | read-only | current | Redundant controller configuration For Reading: BITS 0 == 0xff - RC Functionality Not Supported. == 0 - RC Functionality Disabled. == 1 - RC Functionality Enab… |
| 1.3.6.1.4.1.1714.1.1.6.2 | ScalarredCtlrModeFlags | read-only | current | Redundant controller mode flags BIT 0 : Cache Synchronization (RW) 0 : Cache NOT Synchronized, 1 : Cache Synchronized BIT 1 : Host Channel Failover Mode (RW) 0… |
| 1.3.6.1.4.1.1714.1.1.6.3 | ScalarredCtlrCommType | read-only | current | Redundant controller communication channel type == 0 - RS-232 == 1 - SCSI/Fibre Channel |
| 1.3.6.1.4.1.1714.1.1.6.4 | ScalarredCtlrStatus | read-only | current | Redundant controller status BIT 0 == 0 - Inactive. == 1 - Scanning. == 0x11 - Detected. == 0x12 - Enabled. == 0x3f - Controller Failed. BIT 6 : Original Contro… |
| 1.3.6.1.4.1.1714.1.2 | TableldTable | not-accessible | current | Logical drive table |
| 1.3.6.1.4.1.1714.1.2.1 | RowldEntry | not-accessible | current | Logical drive entry |
| 1.3.6.1.4.1.1714.1.2.1.1 | ColumnldIndex | not-accessible | current | Logical drive index |
| 1.3.6.1.4.1.1714.1.2.1.2 | ColumnldID | read-only | current | Logical drive identifier |
| 1.3.6.1.4.1.1714.1.2.1.3 | ColumnldSize | read-only | current | Logical drive size, in Blocks |
| 1.3.6.1.4.1.1714.1.2.1.4 | ColumnldBlkSizeIdx | read-only | current | Block Size = (Block Size Index) Power of 2 |
| 1.3.6.1.4.1.1714.1.2.1.5 | ColumnldOpModes | read-write | current | Logical drive operating modes BITS 0-3 : RAID Level (RO): 0 : Single Drive 1 : NON-RAID 2 : RAID 0 3 : RAID 1 4 : RAID 3 5 : RAID 4 6 : RAID 5 0xf: NOT DEFINED… |
| 1.3.6.1.4.1.1714.1.2.1.6 | ColumnldStatus | read-only | current | Logical drive status BITS 0-2 : Status Code (RO): 0 : Good 1 : Rebuilding 2 : Initializing 3 : Degraded 4 : Dead 5 : Invalid 6 : Incomplete 7 : Drive Missing B… |
| 1.3.6.1.4.1.1714.1.2.1.7 | ColumnldState | read-only | current | Logical drive state BIT 0 : If SET, in process of rebuilding (degraded mode) or checking/updating Logical Drive Parity (LD is 'good'). BIT 1 : If SET, in proce… |
| 1.3.6.1.4.1.1714.1.2.1.8 | ColumnldTotalDrvCnt | read-only | current | Total hard drive count on logical drive |
| 1.3.6.1.4.1.1714.1.2.1.9 | ColumnldOnlineDrvCnt | read-only | current | On-Line hard drvie count on logical drive |
| 1.3.6.1.4.1.1714.1.2.1.10 | ColumnldSpareDrvCnt | read-only | current | Spare hard drive count on logical drive |
| 1.3.6.1.4.1.1714.1.2.1.11 | ColumnldFailedDrvCnt | read-only | current | Failed hard drive count on logical drive |
| 1.3.6.1.4.1.1714.1.3 | TablelvTable | not-accessible | current | Logical volume table |
| 1.3.6.1.4.1.1714.1.3.1 | RowlvEntry | not-accessible | current | Logical volume entry |
| 1.3.6.1.4.1.1714.1.3.1.1 | ColumnlvIndex | not-accessible | current | Logical volume index |
| 1.3.6.1.4.1.1714.1.3.1.2 | ColumnlvID | read-only | current | Logical volume identifier |
| 1.3.6.1.4.1.1714.1.3.1.3 | ColumnlvSize | read-only | current | Logical volume size, in Blocks |
| 1.3.6.1.4.1.1714.1.3.1.4 | ColumnlvBlkSizeIdx | read-only | current | Block Size = (Block Size Index) Power of 2 |
| 1.3.6.1.4.1.1714.1.3.1.5 | ColumnlvOpModes | read-write | current | Logical volume operating modes BITS 0-6 : Reserved (Set to 0). BIT 7 : Logical Volume Assignment (R/W): If CLEAR, Logical Volume is assigned to Primary Control… |
| 1.3.6.1.4.1.1714.1.3.1.6 | ColumnlvLdCount | read-only | current | Logical drive counts in this logical volume |
| 1.3.6.1.4.1.1714.1.3.1.7 | ColumnlvLdList | read-only | current | Logical drive identifiers list in this logical volume |
| 1.3.6.1.4.1.1714.1.4 | TablepartTable | not-accessible | current | Partition table |
| 1.3.6.1.4.1.1714.1.4.1 | RowpartEntry | not-accessible | current | Partition entry |
| 1.3.6.1.4.1.1714.1.4.1.1 | ColumnpartIndex | not-accessible | current | Partition index |
| 1.3.6.1.4.1.1714.1.4.1.2 | ColumnpartLdLvID | read-only | current | Logical drive/Logical volume identifier |
| 1.3.6.1.4.1.1714.1.4.1.3 | ColumnpartOffset | read-only | current | Partition base offset |
| 1.3.6.1.4.1.1714.1.4.1.4 | ColumnpartSize | read-only | current | Partition size, in Blocks |
| 1.3.6.1.4.1.1714.1.5 | TablelunTable | not-accessible | current | LUN table |
| 1.3.6.1.4.1.1714.1.5.1 | RowlunEntry | not-accessible | current | LUN entry |
| 1.3.6.1.4.1.1714.1.5.1.1 | ColumnlunIndex | not-accessible | current | LUN index |
| 1.3.6.1.4.1.1714.1.5.1.2 | ColumnlunChl | read-only | current | Logical host channel number |
| 1.3.6.1.4.1.1714.1.5.1.3 | ColumnlunID | read-only | current | Host-side SCSI ID |
| 1.3.6.1.4.1.1714.1.5.1.4 | ColumnlunNum | read-only | current | Host-side SCSI LUN |
| 1.3.6.1.4.1.1714.1.5.1.5 | ColumnlunLdLvID | read-only | current | Logical drive/Logical volume identifier |
| 1.3.6.1.4.1.1714.1.5.1.6 | ColumnlunPartIdx | read-only | current | Partition index of logical drive or logical volume |
| 1.3.6.1.4.1.1714.1.6 | TablehddTable | not-accessible | current | Hard disk drive table |
| 1.3.6.1.4.1.1714.1.6.1 | RowhddEntry | not-accessible | current | Hard disk drive entry |
| 1.3.6.1.4.1.1714.1.6.1.1 | ColumnhddIndex | not-accessible | current | Hard disk drive index |
| 1.3.6.1.4.1.1714.1.6.1.2 | ColumnhddLogChlNum | read-only | current | Logical channel number to which hard disk drive is connected |
| 1.3.6.1.4.1.1714.1.6.1.3 | ColumnhddPhyChlNum | read-only | current | Physical channel number to which hard disk drive is connected |
| 1.3.6.1.4.1.1714.1.6.1.4 | ColumnhddScsiId | read-only | current | SCSI ID of hard disk drive |
| 1.3.6.1.4.1.1714.1.6.1.5 | ColumnhddScsiLun | read-only | current | SCSI Lun of hard disk drive |
| 1.3.6.1.4.1.1714.1.6.1.6 | ColumnhddLdId | read-only | current | Logical drive ID to which hard disk drive is belonged 0 : If Drive Status == Spare Drive, then drive is Global Spare. Otherwise, indicates drive does not curre… |
| 1.3.6.1.4.1.1714.1.6.1.7 | ColumnhddSize | read-only | current | Hard disk drive size, in Blocks |
| 1.3.6.1.4.1.1714.1.6.1.8 | ColumnhddBlkSizeIdx | read-only | current | Block Size = (Block Size Index) Power of 2 |
| 1.3.6.1.4.1.1714.1.6.1.9 | ColumnhddSpeed | read-only | current | Hard disk drive data transfer speed, in ns |
| 1.3.6.1.4.1.1714.1.6.1.10 | ColumnhddDataWidth | read-only | current | Hard disk drive data transfer width 0: Narrow 1: Wide |
| 1.3.6.1.4.1.1714.1.6.1.11 | ColumnhddStatus | read-only | current | Hard disk drive status 0 : New Drive 1 : On-Line Drive 2 : Used Drive 3 : Spare Drive 4 : Drive Initialization in Progress 5 : Drive Rebuild in Progress 6 : Ad… |
| 1.3.6.1.4.1.1714.1.6.1.12 | ColumnhddState | read-only | current | Hard disk drive state BITS 0 BIT 7: Drive off-line (RW). |
| 1.3.6.1.4.1.1714.1.6.1.13 | ColumnhddSlotNum | read-only | current | Hard disk drive slot number, 0: N/A |
| 1.3.6.1.4.1.1714.1.6.1.14 | ColumnhddResvSpace | read-only | current | Hard disk drive reserved space Drive Reserved Space Size (64KB units). When set, the index into the 'Valid Value List' should be passed in rather than the size… |
| 1.3.6.1.4.1.1714.1.6.1.15 | ColumnhddModelStr | read-only | current | Hard disk drive model string |
| 1.3.6.1.4.1.1714.1.6.1.16 | ColumnhddFwRevStr | read-only | current | Hard disk drive firmware revision string |
| 1.3.6.1.4.1.1714.1.6.1.17 | ColumnhddSerialNum | read-only | current | Hard disk drive serial number |
| 1.3.6.1.4.1.1714.1.7 | TablechlTable | not-accessible | current | SCSI/Fibre channel table |
| 1.3.6.1.4.1.1714.1.7.1 | RowchlEntry | not-accessible | current | SCSI/Fibre channel entry |
| 1.3.6.1.4.1.1714.1.7.1.1 | ColumnchlIndex | not-accessible | current | SCSI/Fibre channel index |
| 1.3.6.1.4.1.1714.1.7.1.2 | ColumnchlLogChlNum | read-only | current | Logical channel number |
| 1.3.6.1.4.1.1714.1.7.1.3 | ColumnchlPhyChlNum | read-only | current | Physical channel number |
| 1.3.6.1.4.1.1714.1.7.1.4 | ColumnchlType | read-only | current | Channel type 0 : SCSI 1 : PCI 2 : FIBRE 3 : Parallel-IDE 4 : SATA 0x11 : Network-IO - LAN 0x40 : Fixed Redundant Communication Channel Others : not defined |
| 1.3.6.1.4.1.1714.1.7.1.5 | ColumnchlChipType | read-only | current | Channel interface chip type |
| 1.3.6.1.4.1.1714.1.7.1.6 | ColumnchlMaxSupId | read-only | current | Max supported SCSI id |
| 1.3.6.1.4.1.1714.1.7.1.7 | ColumnchlMaxSupLun | read-only | current | Max supported SCSI lun per id |
| 1.3.6.1.4.1.1714.1.7.1.8 | ColumnchlMode | read-only | current | Channel mode flags BIT 0 : Channel Mode (RW) 0: Drive Mode, 1: Host Mode (or dedicated RCC). BIT 1 : Channel SCSI Termination (SCSI Only) (RW) 0: Disabled, 1: … |
| 1.3.6.1.4.1.1714.1.7.1.9 | ColumnchlScsiIdBitmap | read-only | current | SCSI host/drive channel id bitmap BITS 0-15 : Primary Controller SCSI ID Bitmap BITS 16-31 : Secondary Controller SCSI ID Bitmap |
| 1.3.6.1.4.1.1714.1.7.1.10 | ColumnchlFibreIdBase | read-only | current | Fibre host channel id base in units of 0x10. Note that this is ignored for SCSI channels |
| 1.3.6.1.4.1.1714.1.7.1.11 | ColumnchlHostIdBitmap | read-only | current | SCSI/Fibre host channel id bitmap BITS 0-15 : Primary Controller SCSI ID Bitmap BITS 16-31 : Secondary Controller SCSI ID Bitmap |
| 1.3.6.1.4.1.1714.1.7.1.12 | ColumnchlDrvPid | read-only | current | Primary controller SCSI/Fibre drive channel id Note: For Fibre Drive Channels, if == 0x7f then ID will be negotiated. |
| 1.3.6.1.4.1.1714.1.7.1.13 | ColumnchlDrvSid | read-only | current | Secondary controller SCSI/Fibre drive channel id Note: For Fibre Drive Channels, if == 0x7f then ID will be negotiated. If == 0xff, then Fibre loop not initial… |
| 1.3.6.1.4.1.1714.1.7.1.14 | ColumnchlMaxTxPeriod | read-only | current | Maximum synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| 1.3.6.1.4.1.1714.1.7.1.15 | ColumnchlMinTxPeriod | read-only | current | Minimum synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| 1.3.6.1.4.1.1714.1.7.1.16 | ColumnchlDefTxPeriod | read-only | current | Default synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units, 0 - Auto-negotiate) |
| 1.3.6.1.4.1.1714.1.7.1.17 | ColumnchlCurTxPeriod | read-only | current | Current synchronized transfer period (SCSI: 4 ns units, 0 : Async; Fibre: 1/32 ns units) |
| 1.3.6.1.4.1.1714.1.7.1.18 | ColumnchlMaxTxWidth | read-only | current | Maximum synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide) |
| 1.3.6.1.4.1.1714.1.7.1.19 | ColumnchlMinTxWidth | read-only | current | Minimum synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide) |
| 1.3.6.1.4.1.1714.1.7.1.20 | ColumnchlDefTxWidth | read-only | current | Default synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide) |
| 1.3.6.1.4.1.1714.1.7.1.21 | ColumnchlCurTxWidth | read-only | current | Current synchronized transfer width index(SCSI only) (Index - 0:Narrow, 1:Wide) |
| 1.3.6.1.4.1.1714.1.7.1.22 | ColumnchlMaxTagCnt | read-only | current | Maximum tag count |
| 1.3.6.1.4.1.1714.1.7.1.23 | ColumnchlDefTagCnt | read-only | current | Default tag count |
| 1.3.6.1.4.1.1714.1.8 | TableluTable | not-accessible | current | Logical unit table |
| 1.3.6.1.4.1.1714.1.8.1 | RowluEntry | not-accessible | current | Logical unit entry |
| 1.3.6.1.4.1.1714.1.8.1.1 | ColumnluIndex | not-accessible | current | Logical unit index |
| 1.3.6.1.4.1.1714.1.8.1.2 | ColumnluDescriptor | read-only | current | Logical unit descriptor |
| 1.3.6.1.4.1.1714.1.8.1.3 | ColumnluClassCode | read-only | current | Logical unit class code 1 - Enclosure Unit: Manages Power supplies, fans, temperature, UPS', and drive slot states. 2 - 0xfff: Reserved. 0x1000 - 0xffff: Vendo… |
| 1.3.6.1.4.1.1714.1.8.1.4 | ColumnluTypeCode | read-only | current | Logical unit type code 1 - SAF-TE Management Device. 2 - Controller Peripheral Device. 3 - Customable I2C Peripheral Device. 4 - SES Management Device. 5 - 0xf… |
| 1.3.6.1.4.1.1714.1.8.1.5 | ColumnluVendorID | read-only | current | Logical unit vendor ID string |
| 1.3.6.1.4.1.1714.1.8.1.6 | ColumnluIDString | read-only | current | Logical unit ID string |
| 1.3.6.1.4.1.1714.1.8.1.7 | ColumnluHWRev | read-only | current | Logical unit hardware revision string |
| 1.3.6.1.4.1.1714.1.8.1.8 | ColumnluSWRev | read-only | current | Logical unit software revision string |
| 1.3.6.1.4.1.1714.1.8.1.9 | ColumnluChlNum | read-only | current | Channel number to which logical unit is connected |
| 1.3.6.1.4.1.1714.1.8.1.10 | ColumnluIDNum | read-only | current | ID number for logical unit |
| 1.3.6.1.4.1.1714.1.9 | TableluDevTable | not-accessible | current | Logical unit device table |
| 1.3.6.1.4.1.1714.1.9.1 | RowluDevEntry | not-accessible | current | Logical unit device entry |
| 1.3.6.1.4.1.1714.1.9.1.1 | ColumnluDevTabIdx | not-accessible | current | Logical unit device table index |
| 1.3.6.1.4.1.1714.1.9.1.5 | ColumnluDevDescriptor | read-only | current | Logical unit device descriptor |
| 1.3.6.1.4.1.1714.1.9.1.6 | ColumnluDevTypeCode | read-only | current | Logical unit device type code Enclosure Unit Device Types: 1 - Power supply. 2 - Fan. 3 - Temperature sensor. 4 - UPS. 5 - Voltage sensors. 6 - Current sensors… |
| 1.3.6.1.4.1.1714.1.9.1.7 | ColumnluDevIndex | read-only | current | Logical unit device index Can be used to identify device position. If == 0, Index Not Available. For SAF-TE Logical Units, this index corresponds to one greate… |
| 1.3.6.1.4.1.1714.1.9.1.8 | ColumnluDevDescription | read-only | current | Logical unit device description string |
| 1.3.6.1.4.1.1714.1.9.1.9 | ColumnluDevValue | read-only | current | Logical unit device value |
| 1.3.6.1.4.1.1714.1.9.1.10 | ColumnluDevValueUnit | read-only | current | Logical unit device value unit Fan: in RPM Voltage Sensor: in Millivolt Current Sensor: in Milliamps Temperature Sensor: in 1/1000 Degreeds C(Absolut value) |
| 1.3.6.1.4.1.1714.1.9.1.11 | ColumnluDevChlNum | read-only | current | Logical unit device(device slot) channel number |
| 1.3.6.1.4.1.1714.1.9.1.12 | ColumnluDevIDNum | read-only | current | Logical unit device(device slot) id number |
| 1.3.6.1.4.1.1714.1.9.1.13 | ColumnluDevStatus | read-only | current | Logical unit device status flags Power Supply: BIT 0 - CLEAR: Power supply functioning normally. SET: Power supply malfunctioning. BITS 1-5 - Reserved (Set to … |
| 1.3.6.1.4.1.1714.1.10 | TableextLunTable | not-accessible | current | Extended LUN table |
| 1.3.6.1.4.1.1714.1.10.1 | RowextLunEntry | not-accessible | current | Extended LUN entry |
| 1.3.6.1.4.1.1714.1.10.1.1 | ColumnextLunIndex | not-accessible | current | Extended LUN index |
| 1.3.6.1.4.1.1714.1.10.1.2 | ColumnextLunGroupName | read-only | current | Name of this extended LUN definition |
| 1.3.6.1.4.1.1714.1.10.1.3 | ColumnextLunHostIDWWN | read-only | current | Host-ID/WWN of this exteded LUN definition |
| 1.3.6.1.4.1.1714.1.10.1.4 | ColumnextLunHostIDMask | read-only | current | Host-ID/WWN mask of this extended LUN definition |
| 1.3.6.1.4.1.1714.1.10.1.5 | ColumnextLunFilterType | read-only | current | Filtering type of this extended LUN definition |
| 1.3.6.1.4.1.1714.1.10.1.6 | ColumnextLunAccessMode | read-only | current | Access mode of this extended LUN definition |
| 1.3.6.1.4.1.1714.1.10.1.7 | ColumnextLunChl | read-only | current | Logical host channel number |
| 1.3.6.1.4.1.1714.1.10.1.8 | ColumnextLunID | read-only | current | Host-side SCSI ID |
| 1.3.6.1.4.1.1714.1.10.1.9 | ColumnextLunNum | read-only | current | Host-side SCSI LUN |
| 1.3.6.1.4.1.1714.1.10.1.10 | ColumnextLunLdLvID | read-only | current | Logical drive/Logical volume identifier |
| 1.3.6.1.4.1.1714.1.10.1.11 | ColumnextLunPartIdx | read-only | current | Partition index of logical drive or logical volume |
| 1.3.6.1.4.1.1714.1.11 | NodeeventLog | |||
| 1.3.6.1.4.1.1714.1.11.1 | TableallEvtTable | not-accessible | current | All event table |
| 1.3.6.1.4.1.1714.1.11.1.1 | RowallEvtEntry | not-accessible | current | All event entry |
| 1.3.6.1.4.1.1714.1.11.1.1.1 | ColumnevtTableIdx | not-accessible | current | Event table index |
| 1.3.6.1.4.1.1714.1.11.1.1.2 | ColumnevtSource | read-only | current | Event source |
| 1.3.6.1.4.1.1714.1.11.1.1.3 | ColumnevtSeverity | read-only | current | Event severity |
| 1.3.6.1.4.1.1714.1.11.1.1.4 | ColumnevtIndex | read-only | current | Event index |
| 1.3.6.1.4.1.1714.1.11.1.1.5 | ColumnevtType | read-only | current | Event type |
| 1.3.6.1.4.1.1714.1.11.1.1.6 | ColumnevtCode | read-only | current | Event code |
| 1.3.6.1.4.1.1714.1.11.2 | TablectlrEvtTable | not-accessible | current | Controller event table |
| 1.3.6.1.4.1.1714.1.11.2.1 | RowctlrEvtEntry | not-accessible | current | Controller event entry |
| 1.3.6.1.4.1.1714.1.11.3 | TabledrvEvtTable | not-accessible | current | Drive interface event table |
| 1.3.6.1.4.1.1714.1.11.3.1 | RowdrvEvtEntry | not-accessible | current | Drive event entry |
| 1.3.6.1.4.1.1714.1.11.3.1.7 | ColumnevtLdID | read-only | current | Logical drive ID |
| 1.3.6.1.4.1.1714.1.11.3.1.8 | ColumnevtLogChl | read-only | current | Logical channel number |
| 1.3.6.1.4.1.1714.1.11.3.1.9 | ColumnevtID | read-only | current | Node SCSI ID |
| 1.3.6.1.4.1.1714.1.11.3.1.10 | ColumnevtLun | read-only | current | SCSI LUN |
| 1.3.6.1.4.1.1714.1.11.4 | TablehostEvtTable | not-accessible | current | Host interface event table |
| 1.3.6.1.4.1.1714.1.11.4.1 | RowhostEvtEntry | not-accessible | current | Host interface event entry |
| 1.3.6.1.4.1.1714.1.11.4.1.7 | ColumnevtChl | read-only | current | Host SCSI channel number |
| 1.3.6.1.4.1.1714.1.11.5 | TableldEvtTable | not-accessible | current | Logical drive event table |
| 1.3.6.1.4.1.1714.1.11.5.1 | RowldEvtEntry | not-accessible | current | Logical drive event entry |
| 1.3.6.1.4.1.1714.1.11.5.1.8 | ColumnevtFailedChl | read-only | current | Logical channel number of the failed hard drive |
| 1.3.6.1.4.1.1714.1.11.5.1.9 | ColumnevtFailedID | read-only | current | SCSI ID of the failed hard drive |
| 1.3.6.1.4.1.1714.1.11.5.1.10 | ColumnevtFailedLun | read-only | current | SCSI LUN of the failed hard drive |
| 1.3.6.1.4.1.1714.1.11.6 | TablegtEvtTable | not-accessible | current | Generalized target event table |
| 1.3.6.1.4.1.1714.1.11.6.1 | RowgtEvtEntry | not-accessible | current | Generalized target event entry |
| 1.3.6.1.4.1.1714.1.11.6.1.6 | ColumnevtLuDesc | read-only | current | Logical unit descriptor |
| 1.3.6.1.4.1.1714.1.11.6.1.7 | ColumnevtLuDevDesc | read-only | current | Logical unit device descriptor |
| 1.3.6.1.4.1.1714.1.11.6.1.8 | ColumnevtLuClass | read-only | current | Logical unit class code |
| 1.3.6.1.4.1.1714.1.11.6.1.9 | ColumnevtLuSubclass | read-only | current | Logical unit subclass code |
| 1.3.6.1.4.1.1714.1.11.6.1.11 | ColumnevtLuDevType | read-only | current | Logical unit device type |
| 1.3.6.1.4.1.1714.1.11.6.1.12 | ColumnevtLuDevIdx | read-only | current | Logical unit device index |
| 1.3.6.1.4.1.1714.1.11.6.1.13 | ColumnevtEncChl | read-only | current | Enclosure(SAF-TE/SES) unit SCSI channel number |
| 1.3.6.1.4.1.1714.1.11.6.1.14 | ColumnevtEncID | read-only | current | Enclosure(SAF-TE/SES) unit SCSI ID |
| 1.3.6.1.4.1.1714.1.11.6.1.15 | ColumnevtEncLun | read-only | current | Enclosure(SAF-TE/SES) unit SCSI LUN |