IMP-PM810-MIB
1068 objects
Industrial Ethernet Switch root MIB module.
Imported Objects
| ENTITY-MIB | PhysicalIndex |
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | PhysAddress RowStatus TAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.5833 | Nodeswitch | |||
| 1.3.6.1.4.1.5833.800 | IdentityIMP-PM510 | Industrial Ethernet Switch root MIB module. | ||
| 1.3.6.1.4.1.5833.800.1 | NodeiswNextIndexQuery | |||
| 1.3.6.1.4.1.5833.800.1.1 | ScalariswNextFdbStaticIndex | read-only | current | Next available entry index of iswFdbStaticTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.1.2 | ScalariswNextStaticMcFdbIndex | read-only | current | Next available entry index of iswStaticMcastFdbTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.1.3 | ScalariswNextAclProfileIndex | read-only | current | Next available entry index of iswAclProfileTable, query it before create new entry. 0 means no more index. Profile Index 1 is default profile, can't be set. |
| 1.3.6.1.4.1.5833.800.1.4 | ScalariswNextStaticRouteIndex | read-only | current | Next available entry index of iswStaticRouteTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.1.5 | ScalariswNextIgmpAclProfileIndex | read-only | current | Next available entry index of iswIgmpAclProfileTable, query it before create new entry. 0 means no more index. Profile Index 1 is default profile, can't be set. |
| 1.3.6.1.4.1.5833.800.1.6 | ScalariswNextIgmpMvrProfileIndex | read-only | current | Next available entry index of iswIgmpMvrProfileTable, query it before create new entry. 0 means no more index. Profile Index 1 is default profile, can't be set. |
| 1.3.6.1.4.1.5833.800.1.7 | ScalariswNextProtocolVlanIndex | read-only | current | Next available entry index of iswProtocolBaseVlanTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.1.8 | ScalariswNextVlanTranslationIndex | read-only | current | Next available entry index of iswVlanTranslationTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.1.9 | ScalariswNextMstpInstanceIndex | read-only | current | Next available entry index of iswMstpInstanceTable, query it before create new entry. 0 means no more index. |
| 1.3.6.1.4.1.5833.800.2 | NodeiswConfMgt | |||
| 1.3.6.1.4.1.5833.800.2.1 | NodeiswBridge | |||
| 1.3.6.1.4.1.5833.800.2.1.1 | TableiswBridgePortTable | not-accessible | current | Bridge port table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.1.1 | RowiswBridgePortEntry | not-accessible | current | Bridge port entry. |
| 1.3.6.1.4.1.5833.800.2.1.1.1.1 | ColumniswBridgePortIfcIndex | not-accessible | current | Bridge port index. |
| 1.3.6.1.4.1.5833.800.2.1.1.1.2 | ColumniswBridgePortDefaultVlan | read-write | current | Bridge port default vlan. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.1.1.1.3 | ColumniswBridgePortDefaultPriority | read-write | current | Bridge port default priority. Default value is 0. |
| 1.3.6.1.4.1.5833.800.2.1.1.1.4 | ColumniswBridgePortAcceptFrameType | read-write | current | Bridge port accept frame type. Default value is all (1). |
| 1.3.6.1.4.1.5833.800.2.1.2 | TableiswBridgePortIsoTable | not-accessible | current | Bridge port isolation table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.2.1 | RowiswBridgePortIsoEntry | not-accessible | current | Bridge port isolation entry. |
| 1.3.6.1.4.1.5833.800.2.1.2.1.1 | ColumniswBportIsolationSrcPort | not-accessible | current | Bridge port isolation source port. |
| 1.3.6.1.4.1.5833.800.2.1.2.1.2 | ColumniswBportIsolationDstBitMap | read-write | current | Bridge port isolation destination bitmap. Byte[0] for port 7 ~ port 0, but port 0 not support. Byte[1] for port 15 ~ port 8. Byte[2] for port 23 ~ port 16. Byt… |
| 1.3.6.1.4.1.5833.800.2.1.3 | NodeiswVlan | |||
| 1.3.6.1.4.1.5833.800.2.1.3.1 | NodeiswVlanMember | |||
| 1.3.6.1.4.1.5833.800.2.1.3.1.1 | ScalariswVlanMemberPort | read-write | current | Dot1q vlan memberset config: port index. |
| 1.3.6.1.4.1.5833.800.2.1.3.1.2 | ScalariswVlanMemberVID | read-write | current | Dot1q vlan memberset config: VLAN ID |
| 1.3.6.1.4.1.5833.800.2.1.3.1.3 | ScalariswVlanMemberEgress | read-write | current | Dot1q vlan memberset config: join vlan or leave vlan. |
| 1.3.6.1.4.1.5833.800.2.1.3.1.4 | ScalariswVlanMemberUntagged | read-write | current | Dot1q vlan memberset config: tag or untagged port. If want to set untag, please set iswVlanEgressPorts to joinVlan first. |
| 1.3.6.1.4.1.5833.800.2.1.3.2 | TableiswVlanTable | not-accessible | current | VLAN table. Max entry size: 2048. |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1 | RowiswVlanEntry | not-accessible | current | Vlan entry. |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1.1 | ColumniswVlanIndex | not-accessible | current | Dot1q VLAN ID. Use iswNextVlanIndex to get next available VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1.2 | ColumniswVlanName | read-write | current | Dot1q vlan name. |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1.3 | ColumniswVlanEgressPorts | read-write | current | Dot1q vlan egress ports. Byte[0] for port 7 ~ port 0, but port 0 not support. Byte[1] for port 15 ~ port 8. Byte[2] for port 23 ~ port 16. Byte[4] for port 28 … |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1.4 | ColumniswVlanUntaggedPorts | read-write | current | Dot1q vlan untagged ports. Byte[0] for port 7 ~ port 0, but port 0 not support. Byte[1] for port 15 ~ port 8. Byte[2] for port 23 ~ port 16. Byte[4] for port 2… |
| 1.3.6.1.4.1.5833.800.2.1.3.2.1.5 | ColumniswVlanRowStatus | read-create | current | Dot1q vlan static rowstatus. |
| 1.3.6.1.4.1.5833.800.2.1.3.3 | TableiswVlanStackingTable | not-accessible | current | VLAN Stacking table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.3.3.1 | RowiswVlanStackingEntry | not-accessible | current | Vlan Stacking entry. |
| 1.3.6.1.4.1.5833.800.2.1.3.3.1.1 | ColumniswVlanStackingPortId | not-accessible | current | Port ID. |
| 1.3.6.1.4.1.5833.800.2.1.3.3.1.2 | ColumniswVlanStackingQinQMode | read-write | current | Enable/Disable VLAN QinQ mode. Default valuse is disable. |
| 1.3.6.1.4.1.5833.800.2.1.3.4 | ScalariswOuterVlanTagTpid | read-write | current | The extern TPID for the outer VLAN Tag. The range is 1 to 0xffff. The default value is 0x8100. |
| 1.3.6.1.4.1.5833.800.2.1.3.5 | TableiswProtocolBaseVlanTable | not-accessible | current | Protocol-base VLAN table. Max entry size: 20. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1 | RowiswProtocolBaseVlanEntry | not-accessible | current | Protocol-base VLAN entry. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.1 | ColumniswProtocolVlanIndex | not-accessible | current | Protocol-base VLAN index. Use iswNextProtocolVlanIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.2 | ColumniswProtocolVlanPort | read-create | current | Protocol-base VLAN config port number. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.3 | ColumniswProtocolVlanEthType | read-create | current | The Ether Type that the system will assign the VID to. 0..0xFFFF 0x8863:PPPoE Discovery Stage 0x8864:PPPoE Session Stage 0x0800:Internet Protocol 0x0806:Addres… |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.4 | ColumniswProtocolVlanSVlanId | read-create | current | Protocol-base Service VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.5 | ColumniswProtocolVlanPrio | read-create | current | Protocol-base CoS of Service VLAN. Range: 0 .. 7, 8 is reserve. |
| 1.3.6.1.4.1.5833.800.2.1.3.5.1.6 | ColumniswProtocolVlanRowStatus | read-create | current | Protocol-base VLAN table RowStatus. |
| 1.3.6.1.4.1.5833.800.2.1.3.6 | TableiswVlanTranslationTable | not-accessible | current | VLAN translation table. Max entry size: 20. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1 | RowiswVlanTranslationEntry | not-accessible | current | VLAN translation entry. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.1 | ColumniswVlanTranslationIndex | not-accessible | current | VLAN translation index. Use iswNextVlanTranslationIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.2 | ColumniswVlanTranslationPort | read-create | current | VLAN translation port number. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.3 | ColumniswVlanTranslationCVlanId | read-create | current | Customer VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.4 | ColumniswVlanTranslationCPriority | read-create | current | CoS of Customer VLAN. Range: 0 .. 7, 8 is reserve. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.5 | ColumniswVlanTranslationSVlanId | read-create | current | Service VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.6 | ColumniswVlanTranslationSPriority | read-create | current | CoS of Service VLAN. Range: 0 .. 7, 8 is reserve |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.7 | ColumniswVlanTranslationVlanMode | read-create | current | VLAN translation mode. replace-Nto1(0): replace N to 1 |
| 1.3.6.1.4.1.5833.800.2.1.3.6.1.8 | ColumniswVlanTranslationRowStatus | read-create | current | VLAN translation table RowStatus. |
| 1.3.6.1.4.1.5833.800.2.1.4 | NodeiswFdb | |||
| 1.3.6.1.4.1.5833.800.2.1.4.1 | TableiswFdbStaticTable | not-accessible | current | FDB static table. Max entry size: 512. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1 | RowiswFdbStaticEntry | not-accessible | current | FDB static entry. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1.1 | ColumniswFdbStaticIndex | not-accessible | current | Dot1q FDB static entry index. Use iswNextFdbStaticIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1.2 | ColumniswFdbStaticMac | read-create | current | Dot1q FDB static mac. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1.3 | ColumniswFdbStaticVlanID | read-create | current | Dot1q FDB static vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1.4 | ColumniswFdbStaticPort | read-create | current | Dot1q FDB static port. |
| 1.3.6.1.4.1.5833.800.2.1.4.1.1.5 | ColumniswFdbStaticRowStatus | read-create | current | Dot1q FDB static rowstatus. |
| 1.3.6.1.4.1.5833.800.2.1.4.2 | NodeiswFdbStaticDeleteCtrl | |||
| 1.3.6.1.4.1.5833.800.2.1.4.2.1 | ScalariswFdbStaticDeleteIndex | read-write | current | Dot1q FDB static entry index |
| 1.3.6.1.4.1.5833.800.2.1.4.2.2 | ScalariswFdbStaticDeleteVlan | read-write | current | VLAN ID |
| 1.3.6.1.4.1.5833.800.2.1.4.2.3 | ScalariswFdbStaticDeletePort | read-write | current | Port Index |
| 1.3.6.1.4.1.5833.800.2.1.4.2.4 | ScalariswFdbStaticDeleteType | read-write | current | Dot1q FDB static delete type. |
| 1.3.6.1.4.1.5833.800.2.1.4.3 | TableiswTpFdbTable | not-accessible | current | forwarding table. Max entry size: 8192. |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1 | RowiswTpFdbEntry | not-accessible | current | forwarding table entry. |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1.1 | ColumniswDot1qTpFdbIndex | not-accessible | current | forwarding table entry index. |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1.2 | ColumniswDot1qTpFdbAddress | read-only | current | forwarding address. |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1.3 | ColumniswDot1qTpFdbPort | read-only | current | forwarding port. GEPort-1 ~ GEPort-28, and all Trunk ports |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1.4 | ColumniswDot1qTpFdbStatus | read-only | current | forwarding entry status (type). |
| 1.3.6.1.4.1.5833.800.2.1.4.3.1.5 | ColumniswDot1qTpFdbVlan | read-only | current | forwarding vlan. |
| 1.3.6.1.4.1.5833.800.2.1.4.4 | NodeiswFdbDeleteCtrl | |||
| 1.3.6.1.4.1.5833.800.2.1.4.4.1 | ScalariswFdbDeleteVlan | read-write | current | VLAN ID, to delete forwarding entry by VLAN. |
| 1.3.6.1.4.1.5833.800.2.1.4.4.2 | ScalariswFdbDeletePort | read-write | current | Port Index, to delete forwarding entry by Port. GEPort-1 ~ GEPort-28, and all Trunk ports |
| 1.3.6.1.4.1.5833.800.2.1.4.4.3 | ScalariswFdbDeleteType | read-write | current | delete type of forwarding table. |
| 1.3.6.1.4.1.5833.800.2.1.4.5 | ScalariswAgingTime | read-write | current | Aging time. Default value is 300. |
| 1.3.6.1.4.1.5833.800.2.1.5 | NodeiswStormCtrl | |||
| 1.3.6.1.4.1.5833.800.2.1.5.1 | TableiswPortUnknownUcCtrlTable | not-accessible | current | Port unknown unicast control table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.5.1.1 | RowiswPortUnknownUcCtrlEntry | not-accessible | current | Port Unknown unicast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.1.1.1 | ColumniswPortUnknownUcPortID | not-accessible | current | Port unknown unicast port ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.1.1.2 | ColumniswPortUnknownUcRate | read-write | current | Port unknown unicast port ID. Default value is 1000000 Kbps. |
| 1.3.6.1.4.1.5833.800.2.1.5.1.1.3 | ColumniswPortUnknownUcMode | read-write | current | Port unknown unicast port ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.2 | TableiswPortUnknownMcCtrlTable | not-accessible | current | Port Unknown multicast control table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.5.2.1 | RowiswPortUnknownMcCtrlEntry | not-accessible | current | Port Unknown multicast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.2.1.1 | ColumniswPortUnknownMcPortID | not-accessible | current | Port index. |
| 1.3.6.1.4.1.5833.800.2.1.5.2.1.2 | ColumniswPortUnknownMcRate | read-write | current | Port unknown multicast rate. Default value is 1000000 Kbps. |
| 1.3.6.1.4.1.5833.800.2.1.5.2.1.3 | ColumniswPortUnknownMcMode | read-write | current | Port unknown multicast mode. |
| 1.3.6.1.4.1.5833.800.2.1.5.3 | TableiswPortBroadcastCtrlTable | not-accessible | current | Port broadcast control table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.1.5.3.1 | RowiswPortBroadcastCtrlEntry | not-accessible | current | Port broadcast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.3.1.1 | ColumniswPortBroadcastPortID | not-accessible | current | Port broadcast port ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.3.1.2 | ColumniswPortBroadcastRate | read-write | current | Port broadcast rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.1.5.3.1.3 | ColumniswPortBroadcastMode | read-write | current | Port broadcast mode. |
| 1.3.6.1.4.1.5833.800.2.1.5.4 | TableiswVlanUnknownUcCtrlTable | not-accessible | current | Vlan unknown unicast control table. Max entry size: 2048. |
| 1.3.6.1.4.1.5833.800.2.1.5.4.1 | RowiswVlanUnknownUcCtrlEntry | not-accessible | current | Vlan unknown unicast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.4.1.1 | ColumniswVlanUnknownUcVlanID | not-accessible | current | Vlan unknown unicast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.4.1.2 | ColumniswVlanUnknownUcMode | read-only | current | Vlan unknown unicast mode. Only blocked VLAN will be shown. |
| 1.3.6.1.4.1.5833.800.2.1.5.5 | TableiswVlanUnknownMcCtrlTable | not-accessible | current | Vlan unknown multicast control table. Max entry size: 2048. |
| 1.3.6.1.4.1.5833.800.2.1.5.5.1 | RowiswVlanUnknownMcCtrlEntry | not-accessible | current | Vlan unknown multicast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.5.1.1 | ColumniswVlanUnknownMcVlanID | not-accessible | current | Vlan unknown multicast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.5.1.2 | ColumniswVlanUnknownMcMode | read-only | current | Vlan unknown multicast mode. Only blocked VLAN will be shown. |
| 1.3.6.1.4.1.5833.800.2.1.5.6 | TableiswVlanBroadcastCtrlTable | not-accessible | current | Vlan broadcast control table. Max entry size: 2048. |
| 1.3.6.1.4.1.5833.800.2.1.5.6.1 | RowiswVlanBroadcastCtrlEntry | not-accessible | current | Vlan broadcast control entry. |
| 1.3.6.1.4.1.5833.800.2.1.5.6.1.1 | ColumniswVlanBroadcastVlanID | not-accessible | current | Vlan broadcast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.6.1.2 | ColumniswVlanBroadcastMode | read-only | current | Vlan broadcast mode. Only blocked VLAN will be shown. |
| 1.3.6.1.4.1.5833.800.2.1.5.7 | NodeiswVlanUnknownUcCtrlSet | |||
| 1.3.6.1.4.1.5833.800.2.1.5.7.1 | ScalariswVlanUnknownUcVlanIndex | read-write | current | Vlan unknown unicast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.7.2 | ScalariswVlanUnknownUcModeSet | read-write | current | Vlan unknown unicast mode. |
| 1.3.6.1.4.1.5833.800.2.1.5.8 | NodeiswVlanUnknownMcCtrlSet | |||
| 1.3.6.1.4.1.5833.800.2.1.5.8.1 | ScalariswVlanUnknownMcVlanIndex | read-write | current | Vlan unknown multicast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.8.2 | ScalariswVlanUnknownMcModeSet | read-write | current | Vlan unknown multicast mode. |
| 1.3.6.1.4.1.5833.800.2.1.5.9 | NodeiswVlanBroadcastCtrlSet | |||
| 1.3.6.1.4.1.5833.800.2.1.5.9.1 | ScalariswVlanBroadcastVlanIndex | read-write | current | Vlan broadcast vlan ID. |
| 1.3.6.1.4.1.5833.800.2.1.5.9.2 | ScalariswVlanBroadcastModeSet | read-write | current | Vlan broadcast mode. |
| 1.3.6.1.4.1.5833.800.2.2 | NodeiswStpGrp | |||
| 1.3.6.1.4.1.5833.800.2.2.1 | NodeiswStp | |||
| 1.3.6.1.4.1.5833.800.2.2.1.1 | ScalariswStpProtocol | read-write | current | STP protocol specification. Default value is stp (0). |
| 1.3.6.1.4.1.5833.800.2.2.1.2 | ScalariswStpPriority | read-write | current | STP priority. Default is 32768(0x8000). Step is 4096. |
| 1.3.6.1.4.1.5833.800.2.2.1.3 | ScalariswStpTimeSinceTopologyChange | read-only | current | STP time since topology change. |
| 1.3.6.1.4.1.5833.800.2.2.1.4 | ScalariswStpTopChanges | read-only | current | STP top changes. |
| 1.3.6.1.4.1.5833.800.2.2.1.5 | ScalariswStpDesignatedRoot | read-only | current | STP designated root. |
| 1.3.6.1.4.1.5833.800.2.2.1.6 | ScalariswStpBridgeID | read-only | current | STP bridge port ID. |
| 1.3.6.1.4.1.5833.800.2.2.1.7 | ScalariswStpRootCost | read-only | current | STP root cost. |
| 1.3.6.1.4.1.5833.800.2.2.1.8 | ScalariswStpRootPort | read-only | current | STP root port. 0 means NA(no root port). |
| 1.3.6.1.4.1.5833.800.2.2.1.9 | ScalariswStpMaxAge | read-only | current | STP max age. |
| 1.3.6.1.4.1.5833.800.2.2.1.10 | ScalariswStpHellowTime | read-only | current | STP hellow time. |
| 1.3.6.1.4.1.5833.800.2.2.1.11 | ScalariswStpHoldTime | read-only | current | STP hold time. |
| 1.3.6.1.4.1.5833.800.2.2.1.12 | ScalariswStpForwardDelay | read-only | current | STP forward delay. |
| 1.3.6.1.4.1.5833.800.2.2.1.13 | ScalariswStpBridgeMaxAge | read-write | current | STP bridge max age. Default value is 20. The iswStpBridgeMaxAge, iswStpBridgeHellowTime and iswStpBridgeForwardDelay times are constrained as follows: 2 x (isw… |
| 1.3.6.1.4.1.5833.800.2.2.1.14 | ScalariswStpBridgeHellowTime | read-write | current | STP bridge hellow time. Default value is 2. The iswStpBridgeMaxAge, iswStpBridgeHellowTime and iswStpBridgeForwardDelay times are constrained as follows: 2 x (… |
| 1.3.6.1.4.1.5833.800.2.2.1.15 | ScalariswStpBridgeForwardDelay | read-write | current | STP bridge forward delay. Default value is 15. The iswStpBridgeMaxAge, iswStpBridgeHellowTime and iswStpBridgeForwardDelay times are constrained as follows: 2 … |
| 1.3.6.1.4.1.5833.800.2.2.1.16 | ScalariswStpBridgeModeSet | read-write | current | STP bridge mode set. Default value is disable (0). If any ring group is enabled (iswRingProtectRingMode is enable), set this field to enable will be rejected. |
| 1.3.6.1.4.1.5833.800.2.2.1.17 | ScalariswStpBpduFilter | read-write | current | STP bpdu filter. Default value is deny (1). |
| 1.3.6.1.4.1.5833.800.2.2.1.18 | ScalariswStpRegionName | read-write | current | STP Region Name. Default value is emtpy. Max size is 32 chars, preferably in human-readable form. |
| 1.3.6.1.4.1.5833.800.2.2.1.19 | ScalariswStpMSTRevLevel | read-write | current | MST Revision Level. Default value is 0. |
| 1.3.6.1.4.1.5833.800.2.2.2 | TableiswStpPortTable | not-accessible | current | STP port table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.2.2.1 | RowiswStpPortEntry | not-accessible | current | STP port entry. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.1 | ColumniswStpPortIndex | not-accessible | current | STP port index. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.2 | ColumniswStpPortPriority | read-write | current | STP port priority. Default is 0x80(128). Step is 16. 0x0, 0x10, 0x20 ... 0xF0. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.3 | ColumniswStpPortState | read-only | current | STP port state. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.4 | ColumniswStpPortEnable | read-write | current | STP port enable. Default value is enable (1). |
| 1.3.6.1.4.1.5833.800.2.2.2.1.5 | ColumniswStpPortPathCost | read-write | current | STP port path cost. Default value is 20000. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.6 | ColumniswStpPortEdgeType | read-write | current | STP port edge type. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.2.2.1.7 | ColumniswStpPortDesignatedRoot | read-only | current | STP port designated root. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.8 | ColumniswStpPortDesignatedCost | read-only | current | STP port designated cost. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.9 | ColumniswStpPortDesignatedBridge | read-only | current | STP port designated bridge. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.10 | ColumniswStpPortDesignatedPort | read-only | current | STP port designated port. |
| 1.3.6.1.4.1.5833.800.2.2.2.1.11 | ColumniswStpPortForwardTransitions | read-only | current | STP port forward transitions. |
| 1.3.6.1.4.1.5833.800.2.2.3 | TableiswMstpInstanceTable | not-accessible | current | MSTP instance table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.2.2.3.1 | RowiswMstpInstanceEntry | not-accessible | current | MSTP instance entry. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.1 | ColumniswMstpInstIndex | not-accessible | current | MSTP instance index. Can use iswNextMstpInstanceIndex to query next available index. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.2 | ColumniswMstpInstVlanBitMap | read-only | current | MSTP instance Vlan bitmap. Default all bits are 0. Byte[0] for vlan 7 ~ vlan 0, but vlan 0 not support. Byte[1] for vlan 15 ~ vlan 8. .. .. .. Byte[511] for vl… |
| 1.3.6.1.4.1.5833.800.2.2.3.1.3 | ColumniswMstpInstName | read-create | current | Name of MSTP instance. Can't be empty. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.4 | ColumniswMstpInstPriority | read-create | current | MSTP instance priority. Default is 32768 (0x8000). Step is 4096. 0x000, 0x1000, 0x2000, ... 0xF000. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.5 | ColumniswMstpInstBridgeId | read-only | current | MSTP instance bridge ID. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.6 | ColumniswMstpInstDesignatedRoot | read-only | current | MSTP instance designated root. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.7 | ColumniswMstpInstRootPathCost | read-only | current | MSTP instance root cost. |
| 1.3.6.1.4.1.5833.800.2.2.3.1.8 | ColumniswMstpInstRootPort | read-only | current | MSTP instance root port. 0 means NA(no root port). |
| 1.3.6.1.4.1.5833.800.2.2.3.1.9 | ColumniswMstpInstRowStatus | read-create | current | MSTP instance RowStatus. |
| 1.3.6.1.4.1.5833.800.2.2.4 | TableiswMstpInstancePortTable | not-accessible | current | MSTP instance port table. Max entry size: 280 (MSTP Instance number * Port number). |
| 1.3.6.1.4.1.5833.800.2.2.4.1 | RowiswMstpInstancePortEntry | not-accessible | current | MSTP instance port entry. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.1 | ColumniswMstpInstPortMstiId | not-accessible | current | MSTP instance index. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.2 | ColumniswMstpInstPortId | not-accessible | current | MSTP instance port index. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.3 | ColumniswMstpInstPortPriority | read-write | current | MSTP instance port priority. Default is 0x80(128). Step is 16. 0x0, 0x10, 0x20 ... 0xF0. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.4 | ColumniswMstpInstPortPathCost | read-write | current | MSTP instance port path cost. Default value is 20000. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.5 | ColumniswMstpInstPortState | read-only | current | MSTP instance port state. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.6 | ColumniswMstpInstPortRole | read-only | current | MSTP instance port role. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.7 | ColumniswMstpInstPortDesignatedRoot | read-only | current | MSTP instance port designated root. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.8 | ColumniswMstpInstPortDesignatedCost | read-only | current | MSTP instance port designated cost. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.9 | ColumniswMstpInstPortDesignatedBridge | read-only | current | MSTP instance port designated bridge. |
| 1.3.6.1.4.1.5833.800.2.2.4.1.10 | ColumniswMstpInstPortDesignatedPort | read-only | current | MSTP instance port designated port. |
| 1.3.6.1.4.1.5833.800.2.2.5 | NodeiswMstpInstVlanCtrl | |||
| 1.3.6.1.4.1.5833.800.2.2.5.1 | ScalariswMstpInstVlanMSTIID | read-write | current | MSTI ID for add/delete vlan. |
| 1.3.6.1.4.1.5833.800.2.2.5.2 | ScalariswMstpInstVlanStartID | read-write | current | Start VLAN ID for add/delete vlan into/from specific MSTI ID. After set iswMstpInstVlanStartID, both iswMstpInstVlanStartID and iswMstpInstVlanEndID will be ch… |
| 1.3.6.1.4.1.5833.800.2.2.5.3 | ScalariswMstpInstVlanEndID | read-write | current | End VLAN ID for add/delete vlan into/from specific MSTI ID. Limitation: iswMstpInstVlanStartID <= iswMstpInstVlanEndID. |
| 1.3.6.1.4.1.5833.800.2.2.5.4 | ScalariswMstpInstVlanAction | read-write | current | Use iswMstpInstVlanMSTIID, iswMstpInstVlanStartID, iswMstpInstVlanEndID and iswMstpInstVlanAction to add/delete one or multiple vlan id into/from specific MSTI… |
| 1.3.6.1.4.1.5833.800.2.3 | NodeiswIgmp | |||
| 1.3.6.1.4.1.5833.800.2.3.1 | TableiswIgmpVlanIntfTable | not-accessible | current | IGMP vlan interface table. Max entry size: 64. |
| 1.3.6.1.4.1.5833.800.2.3.1.1 | RowiswIgmpVlanIntfEntry | not-accessible | current | IGMP vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.1 | ColumniswIgmpVlanIntfvlan | not-accessible | current | IGMP vlan interface: vlan. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.2 | ColumniswIgmpVlanIntfbport | read-create | current | IGMP vlan interface: bridge port. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.3 | ColumniswIgmpVlanIntfversion | read-create | current | IGMP vlan interface: version. Default value is igmpV2(2). |
| 1.3.6.1.4.1.5833.800.2.3.1.1.4 | ColumniswIgmpVlanIntfaccessMode | read-create | current | IGMP vlan interface: access mode. Default value is snoopingMode(0). |
| 1.3.6.1.4.1.5833.800.2.3.1.1.5 | ColumniswIgmpVlanIntfleaveMode | read-create | current | IGMP vlan interface: leave mode. Default value is normalLeave(0). |
| 1.3.6.1.4.1.5833.800.2.3.1.1.6 | ColumniswIgmpVlanIntfrobustness | read-create | current | IGMP vlan interface: robustness. Default value is 2. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.7 | ColumniswIgmpVlanIntfqueryInterval | read-create | current | IGMP vlan interface: query interval. Default value is 125 seconds. Limitation: iswIgmpVlanIntfqueryInterval > iswIgmpVlanIntfmaxRespTime in the same unit :seco… |
| 1.3.6.1.4.1.5833.800.2.3.1.1.8 | ColumniswIgmpVlanIntfmaxRespTime | read-create | current | IGMP vlan interface: max response time. Default value is 100. (unit: 0.1 seconds) If get or set value is 100, it means 10 sec. iswIgmpVlanIntfqueryInterval > i… |
| 1.3.6.1.4.1.5833.800.2.3.1.1.9 | ColumniswIgmpVlanIntfgroupMembershipTime | read-only | current | IGMP vlan interface: group membership time. (unit: 0.1 seconds) If get value is 1, it means 0.1 sec. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.10 | ColumniswIgmpVlanIntfLMQI | read-create | current | IGMP vlan interface: last member query interval. Default value is 1. (unit: 0.1 seconds) If get value is 1, it means 0.1 sec. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.11 | ColumniswIgmpVlanIntfLMQC | read-create | current | IGMP vlan interface: last member query count. Default value is 2. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.12 | ColumniswIgmpVlanIntfquerierSrcIpAddr | read-create | current | IGMP vlan interface: querier source ip address. (0.0.0.0 ~ 223.255.255.255, default:0.0.0.0). |
| 1.3.6.1.4.1.5833.800.2.3.1.1.13 | ColumniswIgmpVlanIntfv2PresentTime | read-only | current | It can be tuned by (last iswIgmpVlanIntfqueryInterval*10*iswIgmpVlanIntfrobustness + iswIgmpVlanIntfmaxRespTime) |
| 1.3.6.1.4.1.5833.800.2.3.1.1.14 | ColumniswIgmpVlanIntfRunVersion | read-only | current | Display current running version. |
| 1.3.6.1.4.1.5833.800.2.3.1.1.15 | ColumniswIgmpVlanIntfRunRobustness | read-only | current | Display QRV value or configured value. To support QRV and QQIC in IGMPv3 mode. Industrial Ethernet Switch support 2 parameters to represent the running Robustn… |
| 1.3.6.1.4.1.5833.800.2.3.1.1.16 | ColumniswIgmpVlanIntfRunQueryInterval | read-only | current | Display QQIC value or configured value. To support QRV and QQIC in IGMPv3 mode. Industrial Ethernet Switch support 2 parameters to represent the running Robust… |
| 1.3.6.1.4.1.5833.800.2.3.1.1.17 | ColumniswIgmpVlanIntfrowStatus | read-create | current | IGMP vlan interface: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.2 | TableiswStaticMcastFdbTable | not-accessible | current | Static multicast FDB table. Max entry size: 128. |
| 1.3.6.1.4.1.5833.800.2.3.2.1 | RowiswStaticMcastFdbEntry | not-accessible | current | Static multicast FDB entry. |
| 1.3.6.1.4.1.5833.800.2.3.2.1.1 | ColumniswStaticMcastFdbIndex | not-accessible | current | Static multicast FDB index. Use iswNextStaticMcFdbIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.3.2.1.2 | ColumniswStaticMcastFdbGroupAddr | read-create | current | Static multicast FDB group address. 224.0.0.0 ~ 239.255.255.255 |
| 1.3.6.1.4.1.5833.800.2.3.2.1.3 | ColumniswStaticMcastFdbVlan | read-create | current | Static multicast FDB vlan. |
| 1.3.6.1.4.1.5833.800.2.3.2.1.4 | ColumniswStaticMcastFdbPort | read-create | current | Static multicast FDB port. |
| 1.3.6.1.4.1.5833.800.2.3.2.1.5 | ColumniswStaticMcastFdbRowStatus | read-create | current | Static multicast FDB RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.3 | NodeiswStaticMcastFdbDeleteCtrl | |||
| 1.3.6.1.4.1.5833.800.2.3.3.1 | ScalariswStaticMcastFdbDeleteIndex | read-write | current | Static multicast FDB entry index to be deleted. |
| 1.3.6.1.4.1.5833.800.2.3.3.2 | ScalariswStaticMcastFdbDeleteVlan | read-write | current | To delete Static multicast FDB entry by VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.3.3.3 | ScalariswStaticMcastFdbDeletePort | read-write | current | To delete Static multicast FDB entry by Port Index. |
| 1.3.6.1.4.1.5833.800.2.3.3.5 | ScalariswStaticMcastFdbDeleteType | read-write | current | Static multicast FDB delete type. |
| 1.3.6.1.4.1.5833.800.2.3.4 | TableiswMulticastFdbTable | not-accessible | current | Multicast FDB table. Max entry size: 512. |
| 1.3.6.1.4.1.5833.800.2.3.4.1 | RowiswMulticastFdbEntry | not-accessible | current | Multicast FDB entry. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.1 | ColumniswMcastFdbIndx | not-accessible | current | Multicast FDB index. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.2 | ColumniswMcastFdbGroupAddr | read-only | current | Multicast FDB group address. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.3 | ColumniswMcastFdbVlan | read-only | current | Multicast FDB vlan. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.4 | ColumniswMcastFdbPort | read-only | current | Multicast FDB port. Port 1~28. Each 1 byte for single port. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.5 | ColumniswMcastFdbFilterMode | read-only | current | Multicast FDB filter mode. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.6 | ColumniswMcastFdbRemainTime | read-only | current | Remaining Time for multicast forwarding table. (unit :0.1 sec) Each 4 bytes for single port. Total 112 bytes for 28 ports. |
| 1.3.6.1.4.1.5833.800.2.3.4.1.7 | ColumniswMcastFdbStatus | read-only | current | Multicast FDB status. Each 1 byte for single port. Mapping: invalid (0), dynamic (1), static (2) |
| 1.3.6.1.4.1.5833.800.2.3.5 | NodeiswMcastFdbDeleteCtrl | |||
| 1.3.6.1.4.1.5833.800.2.3.5.1 | ScalariswMcastFdbDeleteVlan | read-write | current | VLAN ID |
| 1.3.6.1.4.1.5833.800.2.3.5.2 | ScalariswMcastFdbDeletePort | read-write | current | Port Index. |
| 1.3.6.1.4.1.5833.800.2.3.5.3 | ScalariswMcastFdbDeleteType | read-write | current | multicast FDB delete type. It will delete dynamic multicase FDB. |
| 1.3.6.1.4.1.5833.800.2.3.6 | TableiswMulticastSrcFdbTable | not-accessible | current | Multicast Source FDB table. Max entry size: 64. |
| 1.3.6.1.4.1.5833.800.2.3.6.1 | RowiswMulticastSrcFdbEntry | not-accessible | current | Multicast Source FDB entry. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.1 | ColumniswMcastSrcFdbIndex | not-accessible | current | Multicast Source FDB index. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.2 | ColumniswMcastSrcFdbGroupAddr | read-only | current | Multicast Source FDB group address. 224.0.0.0 - 239.255.255.255. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.3 | ColumniswMcastSrcFdbVlan | read-only | current | Multicast Source FDB vlan. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.4 | ColumniswMcastSrcFdbFilterMode | read-only | current | Multicast Source FDB filter mode. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.5 | ColumniswMcastSrcFdbGroupRemainTime | read-only | current | 0 is meaning no timeout. In include mode, the iswMcastSrcFdbGroupRemainTime is no timeout. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.6 | ColumniswMcastSrcFdbSrcIP | read-only | current | Source IP address. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.7 | ColumniswMcastSrcFdbSrcRemainTime | read-only | current | 0 is meaning no timeout. In exclude mode, if the iswMcastSrcFdbSrcFilter is block, the iswMcastSrcFdbSrcRemainTime is no timeout. |
| 1.3.6.1.4.1.5833.800.2.3.6.1.8 | ColumniswMcastSrcFdbSrcFilter | read-only | current | Multicast Source FDB filter. |
| 1.3.6.1.4.1.5833.800.2.3.7 | NodeiswIgmpAcl | |||
| 1.3.6.1.4.1.5833.800.2.3.7.1 | TableiswIgmpAclProfileTable | not-accessible | current | IGMP Acl profile table. Max entry size: 15. Each entry will be referred to from iswIgmpAclBindTable. Once Profile is binded in iswIgmpAclBindProfileIndex, it m… |
| 1.3.6.1.4.1.5833.800.2.3.7.1.1 | RowiswIgmpAclProfileEntry | not-accessible | current | IGMP Acl profile entry. |
| 1.3.6.1.4.1.5833.800.2.3.7.1.1.1 | ColumniswIgmpAclProfileIndex | not-accessible | current | IGMP Acl profile index. Use iswNextIgmpAclProfileIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.3.7.1.1.2 | ColumniswIgmpAclProfileDefRule | read-create | current | IGMP Acl profile default rule. Default is permit(0). |
| 1.3.6.1.4.1.5833.800.2.3.7.1.1.3 | ColumniswIgmpAclProfileRowStatus | read-create | current | IGMP Acl profile RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.7.2 | TableiswIgmpAclEntryTable | not-accessible | current | IGMP Acl entry table. Max entry size: 448(14x32). 1 IGMP Acl profile contains max 32 IGMP Acl entries. But profile 1 has no entry. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1 | RowiswIgmpAclEntryEntry | not-accessible | current | IGMP Acl entry entry. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.1 | ColumniswIgmpAclEntryProfileIndex | not-accessible | current | IGMP Acl profile index. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.2 | ColumniswIgmpAclEntryIndex | not-accessible | current | IGMP Acl entry index. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.3 | ColumniswIgmpAclEntryStartIP | read-create | current | IGMP Acl Start IP address. Range: 224.0.1.0 - 239.255.255.255. Start IP address <= End IP address. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.4 | ColumniswIgmpAclEntryEndIP | read-create | current | IGMP Acl End IP address. Range: 224.0.1.0 - 239.255.255.255. Start IP address <= End IP address. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.5 | ColumniswIgmpAclEntrySVlan | read-create | current | IGMP Acl entry SVlan. 0 is any vlan. |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.6 | ColumniswIgmpAclEntryRule | read-create | current | IGMP Acl entry parameter. Default is permit(0). |
| 1.3.6.1.4.1.5833.800.2.3.7.2.1.7 | ColumniswIgmpAclEntryRowStatus | read-create | current | IGMP Acl entry RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.7.3 | TableiswIgmpAclBindTable | not-accessible | current | IGMP Acl bind table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.2.3.7.3.1 | RowiswIgmpAclBindEntry | not-accessible | current | IGMP Acl bind entry. |
| 1.3.6.1.4.1.5833.800.2.3.7.3.1.1 | ColumniswIgmpAclBindPortIndex | not-accessible | current | Port index. |
| 1.3.6.1.4.1.5833.800.2.3.7.3.1.2 | ColumniswIgmpAclBindProfileIndex | read-write | current | IGMP ACL profile index. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.3.7.3.1.3 | ColumniswIgmpAclBindConfMaxChannel | read-write | current | IGMP Acl port Max channel. Default value is 512. |
| 1.3.6.1.4.1.5833.800.2.3.8 | NodeiswIgmpMvr | |||
| 1.3.6.1.4.1.5833.800.2.3.8.1 | TableiswIgmpMvrProfileTable | not-accessible | current | IGMP MVR profile table. Max entry size: 15. Each entry will be referred to from iswIgmpMvrBindTable. Once Profile is binded in iswIgmpMvrBindProfileIndex, it m… |
| 1.3.6.1.4.1.5833.800.2.3.8.1.1 | RowiswIgmpMvrProfileEntry | not-accessible | current | IGMP MVR profile entry. |
| 1.3.6.1.4.1.5833.800.2.3.8.1.1.1 | ColumniswIgmpMvrProfileIndex | not-accessible | current | IGMP MVR profile index. Use iswNextIgmpMvrProfileIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.3.8.1.1.2 | ColumniswIgmpMvrProfileRowStatus | read-create | current | IGMP MVR profile RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.8.2 | TableiswIgmpMvrEntryTable | not-accessible | current | IGMP MVR entry table. Max entry size: 448(14x32). 1 IGMP Mvr profile contains max 32 IGMP Mvr entries. But profile 1 has no entry. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1 | RowiswIgmpMvrEntryEntry | not-accessible | current | IGMP MVR entry entry. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.1 | ColumniswIgmpMvrEntryProfileIndex | not-accessible | current | IGMP MVR profile index. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.2 | ColumniswIgmpMvrEntryIndex | not-accessible | current | IGMP MVR entry index. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.3 | ColumniswIgmpMvrEntryStartIP | read-create | current | IGMP Mvr Start IP address. Range: 224.0.1.0 - 239.255.255.255 Start IP address <= End IP address. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.4 | ColumniswIgmpMvrEntryEndIP | read-create | current | IGMP Mvr End IP address. Range: 224.0.1.0 - 239.255.255.255 Start IP address <= End IP address. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.5 | ColumniswIgmpMvrEntrySVlan | read-create | current | IGMP MVR entry SVlan. |
| 1.3.6.1.4.1.5833.800.2.3.8.2.1.6 | ColumniswIgmpMvrEntryRowStatus | read-create | current | IGMP MVR entry RowStatus. |
| 1.3.6.1.4.1.5833.800.2.3.8.3 | TableiswIgmpMvrBindTable | not-accessible | current | IGMP MVR bind table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.2.3.8.3.1 | RowiswIgmpMvrBindEntry | not-accessible | current | IGMP MVR bind entry. |
| 1.3.6.1.4.1.5833.800.2.3.8.3.1.1 | ColumniswIgmpMvrBindPortIndex | not-accessible | current | Port index. |
| 1.3.6.1.4.1.5833.800.2.3.8.3.1.2 | ColumniswIgmpMvrBindProfileIndex | read-write | current | IGMP MVR profile index. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4 | NodeiswQos | |||
| 1.3.6.1.4.1.5833.800.2.4.1 | NodeiswPolicer | |||
| 1.3.6.1.4.1.5833.800.2.4.1.1 | NodeiswPolicerIngressColor | |||
| 1.3.6.1.4.1.5833.800.2.4.1.1.1 | ScalariswPolicerInColorAwareMode | read-write | current | Policer Income color aware mode. Default value is blind (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.2 | ScalariswPolicerIngressColorCoS0 | read-write | current | Policer ingress color CoS 0. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.3 | ScalariswPolicerIngressColorCoS1 | read-write | current | Policer ingress color CoS 1. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.4 | ScalariswPolicerIngressColorCoS2 | read-write | current | Policer ingress color CoS 2. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.5 | ScalariswPolicerIngressColorCoS3 | read-write | current | Policer ingress color CoS 3. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.6 | ScalariswPolicerIngressColorCoS4 | read-write | current | Policer ingress color CoS 4. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.7 | ScalariswPolicerIngressColorCoS5 | read-write | current | Policer ingress color CoS 5. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.8 | ScalariswPolicerIngressColorCoS6 | read-write | current | Policer ingress color CoS 6. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.1.9 | ScalariswPolicerIngressColorCoS7 | read-write | current | Policer ingress color CoS 7. Default value is green (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.2 | NodeiswPolicerColorMarking | |||
| 1.3.6.1.4.1.5833.800.2.4.1.2.1 | ScalariswPolicerCoSMarkingGreen | read-write | current | Policer CoS marking green. Default value is 7. |
| 1.3.6.1.4.1.5833.800.2.4.1.2.2 | ScalariswPolicerCoSMarkingYellow | read-write | current | Policer CoS marking green. Default value is 5. |
| 1.3.6.1.4.1.5833.800.2.4.1.2.3 | ScalariswPolicerCoSMarkingRed | read-write | current | Policer CoS marking green. Default value is 3. |
| 1.3.6.1.4.1.5833.800.2.4.1.2.4 | ScalariswPolicerDSCPMarkingGreen | read-write | current | Policer CoS marking green. Default value is 56. |
| 1.3.6.1.4.1.5833.800.2.4.1.2.5 | ScalariswPolicerDSCPMarkingYellow | read-write | current | Policer CoS marking green. Default value is 40. |
| 1.3.6.1.4.1.5833.800.2.4.1.2.6 | ScalariswPolicerDSCPMarkingRed | read-write | current | Policer CoS marking green. Default value is 24. |
| 1.3.6.1.4.1.5833.800.2.4.1.3 | TableiswIngressPolicerTable | not-accessible | current | Ingress policer table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1 | RowiswIngressPolicerEntry | not-accessible | current | Ingress policer entry. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.1 | ColumniswIngressPolicerPortId | not-accessible | current | Ingress policer port ID. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.2 | ColumniswIngressPolicerMode | read-write | current | Ingress policer mode. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.3 | ColumniswIngressPolicerPIR | read-write | current | Ingress policer PIR. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.4 | ColumniswIngressPolicerPBS | read-write | current | Ingress policer PBS. Default value is 10000. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.5 | ColumniswIngressPolicerCIR | read-write | current | Ingress policer CIR. Default value is 500000. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.6 | ColumniswIngressPolicerCBS | read-write | current | Ingress policer CBS. Default value is 10000. |
| 1.3.6.1.4.1.5833.800.2.4.1.3.1.7 | ColumniswIngressPolicerExceedAction | read-write | current | Ingress policer exceed action. Default value is drop (0). |
| 1.3.6.1.4.1.5833.800.2.4.2 | NodeiswShaper | |||
| 1.3.6.1.4.1.5833.800.2.4.2.1 | TableiswPortShaperTable | not-accessible | current | Port shaper table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.4.2.1.1 | RowiswPortShaperEntry | not-accessible | current | Port shaper entry. |
| 1.3.6.1.4.1.5833.800.2.4.2.1.1.1 | ColumniswPortShaperPortId | not-accessible | current | Port shaper port ID. |
| 1.3.6.1.4.1.5833.800.2.4.2.1.1.2 | ColumniswPortShaperMode | read-write | current | Port shaper port ID. Default is disable (0). |
| 1.3.6.1.4.1.5833.800.2.4.2.1.1.3 | ColumniswPortShaperPortRate | read-write | current | Port shaper port ID. Default value is 1000000, Unit is Kpbs. |
| 1.3.6.1.4.1.5833.800.2.4.2.2 | TableiswQueShaperTable | not-accessible | current | Queue shaper table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1 | RowiswQueShaperEntry | not-accessible | current | Queue shaper entry. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.1 | ColumniswQueueShaperPortId | not-accessible | current | Queue shaper port ID. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.2 | ColumniswQueueShaperMode | read-write | current | Queue shaper mode. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.3 | ColumniswQueueShaperQ7Rate | read-write | current | Queue shaper queue 7 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.4 | ColumniswQueueShaperQ6Rate | read-write | current | Queue shaper queue 6 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.5 | ColumniswQueueShaperQ5Rate | read-write | current | Queue shaper queue 5 eate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.6 | ColumniswQueueShaperQ4Rate | read-write | current | Queue shaper queue 4 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.7 | ColumniswQueueShaperQ3Rate | read-write | current | Queue shaper queue 3 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.8 | ColumniswQueueShaperQ2Rate | read-write | current | Queue shaper queue 2 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.9 | ColumniswQueueShaperQ1Rate | read-write | current | Queue shaper queue 1 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.2.2.1.10 | ColumniswQueueShaperQ0Rate | read-write | current | Queue shaper queue 0 rate. Default value is 1000000. |
| 1.3.6.1.4.1.5833.800.2.4.3 | NodeiswQueScheduler | |||
| 1.3.6.1.4.1.5833.800.2.4.3.1 | NodeiswCosQueMapping | |||
| 1.3.6.1.4.1.5833.800.2.4.3.1.1 | ScalariswCosQueueMappingCos0 | read-write | current | CoS queue mapping. Default is 0 |
| 1.3.6.1.4.1.5833.800.2.4.3.1.2 | ScalariswCosQueueMappingCos1 | read-write | current | CoS queue mapping. Default is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.3 | ScalariswCosQueueMappingCos2 | read-write | current | CoS queue mapping. Default is 2. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.4 | ScalariswCosQueueMappingCos3 | read-write | current | CoS queue mapping. Default is 3. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.5 | ScalariswCosQueueMappingCos4 | read-write | current | CoS queue mapping. Default is 4. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.6 | ScalariswCosQueueMappingCos5 | read-write | current | CoS queue mapping. Default is 5. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.7 | ScalariswCosQueueMappingCos6 | read-write | current | CoS queue mapping. Default is 6. |
| 1.3.6.1.4.1.5833.800.2.4.3.1.8 | ScalariswCosQueueMappingCos7 | read-write | current | CoS queue mapping. Default is 7. |
| 1.3.6.1.4.1.5833.800.2.4.3.2 | TableiswSchedulingProfileTable | not-accessible | current | Scheduling profile table. Max entry size: 8. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1 | RowiswSchedulingProfileEntry | not-accessible | current | Scheduling profile entry. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.1 | ColumniswSchedulingProfileId | not-accessible | current | Scheduling profile ID. Profile ID 1 is default profile and read-only, can't be set. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.2 | ColumniswSchedulingMode | read-write | current | Scheduling mode. Default value is sp (1). |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.3 | ColumniswSchedulingQ7Weight | read-write | current | Scheduling queue 7 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.4 | ColumniswSchedulingQ6Weight | read-write | current | Scheduling queue 6 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.5 | ColumniswSchedulingQ5Weight | read-write | current | Scheduling queue 5 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.6 | ColumniswSchedulingQ4Weight | read-write | current | Scheduling queue 4 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.7 | ColumniswSchedulingQ3Weight | read-write | current | Scheduling queue 3 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.8 | ColumniswSchedulingQ2Weight | read-write | current | Scheduling queue 1 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.9 | ColumniswSchedulingQ1Weight | read-write | current | Scheduling queue 1 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.2.1.10 | ColumniswSchedulingQ0Weight | read-write | current | Scheduling queue 0 weight. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.4.3.3 | TableiswSchedulingBindTable | not-accessible | current | Scheduling bind table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.4.3.3.1 | RowiswSchedulingBindEntry | not-accessible | current | Scheduling bind entry. |
| 1.3.6.1.4.1.5833.800.2.4.3.3.1.1 | ColumniswSchedulingBindPortId | not-accessible | current | Scheduling bind port ID. |
| 1.3.6.1.4.1.5833.800.2.4.3.3.1.2 | ColumniswSchedulingBindProfileId | read-write | current | Scheduling profile ID. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.5 | NodeiswAcl | |||
| 1.3.6.1.4.1.5833.800.2.5.1 | TableiswAclProfileTable | not-accessible | current | Acl profile table. Max entry size: 20. Each entry will be referred to from iswAclBindTable. Once Profile is binded in iswAclBindProfileIndex, it means the rela… |
| 1.3.6.1.4.1.5833.800.2.5.1.1 | RowiswAclProfileEntry | not-accessible | current | Acl profile entry. |
| 1.3.6.1.4.1.5833.800.2.5.1.1.1 | ColumniswAclProfileIndex | not-accessible | current | Acl profile index. Use iswNextAclProfileIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.5.1.1.2 | ColumniswAclProfileName | read-create | current | Acl profile name. Default is empty. |
| 1.3.6.1.4.1.5833.800.2.5.1.1.3 | ColumniswAclProfileRowStatus | read-create | current | Acl profile RowStatus. |
| 1.3.6.1.4.1.5833.800.2.5.2 | TableiswAclEntryTable | not-accessible | current | Acl entry table. Max entry size: 608(19x32). 1 ACL profile contains max 32 ACL entries. But profile 1 has no entry. Once Profile is binded in iswAclBindProfile… |
| 1.3.6.1.4.1.5833.800.2.5.2.1 | RowiswAclEntryEntry | not-accessible | current | Acl entry entry. |
| 1.3.6.1.4.1.5833.800.2.5.2.1.1 | ColumniswAclEntryProfileIndex | not-accessible | current | Acl profile index. |
| 1.3.6.1.4.1.5833.800.2.5.2.1.2 | ColumniswAclEntryIndex | not-accessible | current | Acl entry index. |
| 1.3.6.1.4.1.5833.800.2.5.2.1.3 | ColumniswAclEntryType | read-create | current | Acl entry type. mac type need to set iswAclEntryParam1~iswAclEntryParam10. ipv4 type need to set iswAclEntryParam1~iswAclEntryParam5. l4port type need to set i… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.4 | ColumniswAclEntryParam1 | read-create | current | Acl entry parameter 1. If aclEntryType is MAC, this parameter means VLAN ID. range is 0 ~ 4094. The default value is 0, means Any (Don't care). If aclEntryType… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.5 | ColumniswAclEntryParam2 | read-write | current | Acl entry parameter 2. If aclEntryType is MAC, this parameter means High 3 bytes of Source MAC. Range is 0 ~ 0x00ffffff. For example: 00:11:22:33:44:55. The Hi… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.6 | ColumniswAclEntryParam3 | read-write | current | Acl entry parameter 3. If aclEntryType is MAC, this parameter means Low 3 bytes of Source MAC. Range is 0 ~ 0x00ffffff. For example: 00:11:22:33:44:55. The Low… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.7 | ColumniswAclEntryParam4 | read-write | current | Acl entry parameter 4. If aclEntryType is MAC, this parameter is meaning High 3 bytes of Source MAC mask. Range is 0 ~ 0x00ffffff. For example: FF:FF:FF:00:00:… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.8 | ColumniswAclEntryParam5 | read-write | current | Acl entry parameter 5. If aclEntryType is MAC, this parameter means Low 3 bytes of Source MAC mask. Range is 0 ~ 0x00ffffff. For example: FF:FF:FF:00:00:00. Th… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.9 | ColumniswAclEntryParam6 | read-write | current | Acl entry parameter 6. If aclEntryType is MAC, this parameter means High 3 bytes of Destination MAC. Range is 0 ~ 0x00ffffff. For example: 00:11:22:33:44:55. T… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.10 | ColumniswAclEntryParam7 | read-write | current | Acl entry parameter 7. If aclEntryType is MAC, this parameter means Low 3 bytes of Destination MAC. Range is 0 ~ 0x00ffffff. For example: 00:11:22:33:44:55. Th… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.11 | ColumniswAclEntryParam8 | read-write | current | Acl entry parameter 8. If aclEntryType is MAC, this parameter means High 3 bytes of Destination MAC mask. Range is 0 ~ 0x00ffffff. For example: FF:FF:FF:00:00:… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.12 | ColumniswAclEntryParam9 | read-write | current | Acl entry parameter 9. If aclEntryType is MAC, this parameter means Low 3 bytes of Destination MAC mask. Range is 0 ~ 0x00ffffff. For example: FF:FF:FF:00:00:0… |
| 1.3.6.1.4.1.5833.800.2.5.2.1.13 | ColumniswAclEntryParam10 | read-write | current | Acl entry parameter 10. If aclEntryType is MAC, this parameter means EtherType. Range is 0 and 0x05dd ~ 0xfffe. Use Hex format for UI input. The default value … |
| 1.3.6.1.4.1.5833.800.2.5.2.1.14 | ColumniswAclEntryAction | read-write | current | Acl entry action type. tos type need to set iswAclEntryActionParam1. queue type need to set iswAclEntryActionParam1. |
| 1.3.6.1.4.1.5833.800.2.5.2.1.15 | ColumniswAclEntryActionParam1 | read-write | current | Acl entry action parameter. CoS 0 ~ 7 for action type is CoS, Queue 0 ~ 7 for action type is Queue. |
| 1.3.6.1.4.1.5833.800.2.5.2.1.16 | ColumniswAclEntryRowStatus | read-create | current | Acl entry RowStatus. |
| 1.3.6.1.4.1.5833.800.2.5.3 | TableiswAclBindTable | not-accessible | current | Acl bind table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.5.3.1 | RowiswAclBindEntry | not-accessible | current | Acl bind entry. |
| 1.3.6.1.4.1.5833.800.2.5.3.1.1 | ColumniswAclBindPortIndex | not-accessible | current | Port index. |
| 1.3.6.1.4.1.5833.800.2.5.3.1.2 | ColumniswAclBindProfileIndex | read-write | current | ACL profile index. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.5.3.1.3 | ColumniswAclBindDefaultAclRule | read-write | current | Acl bind default Acl rule. Default value is permit (0). |
| 1.3.6.1.4.1.5833.800.2.6 | NodeiswEnetPort | |||
| 1.3.6.1.4.1.5833.800.2.6.1 | TableiswEthernetPortTable | not-accessible | current | Ethernet port table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.6.1.1 | RowiswEthernetPortEntry | not-accessible | current | Ethernet port entry. |
| 1.3.6.1.4.1.5833.800.2.6.1.1.1 | ColumniswPortEnetPortIndex | not-accessible | current | Port ethernet port index. |
| 1.3.6.1.4.1.5833.800.2.6.1.1.2 | ColumniswPortEnetAdminStatus | read-write | current | Port ethernet admin status. Default value is enable (1). |
| 1.3.6.1.4.1.5833.800.2.6.1.1.3 | ColumniswPortEnetMode | read-write | current | Port ethernet mode. Default value is auto (1). Fiber port are SFP, can't change the mode. |
| 1.3.6.1.4.1.5833.800.2.6.1.1.4 | ColumniswPortEnetLinkStatus | read-only | current | Port ethernet link status. |
| 1.3.6.1.4.1.5833.800.2.6.1.1.5 | ColumniswPortEnetCopperSFPPriority | read-write | current | Port ethernet copper SFP priority. Copper port only accept copper(2), can't be changed. Filber port only accept copper(2), can't be changed. Combo port (copper… |
| 1.3.6.1.4.1.5833.800.2.6.1.1.6 | ColumniswPortEnetSFPStatus | read-only | current | Port ethernet SFP status. Copper port always linkdown(2). Combo port (copper and fiber) is linkup(1) or linkdown(2). Filber port, if value is linkup(1), can re… |
| 1.3.6.1.4.1.5833.800.2.6.1.1.7 | ColumniswPortEnetFlowCtrl | read-write | current | Port ethernet flow control. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.6.1.1.8 | ColumniswportEnetSFPSpeed | read-write | current | Filber Port speed. Default value is auto (1). |
| 1.3.6.1.4.1.5833.800.2.6.2 | NodeiswJumboFrame | |||
| 1.3.6.1.4.1.5833.800.2.6.2.1 | ScalariswMtuJumboMode | read-write | current | Mtu jumbo frame mode. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.6.2.2 | ScalariswMtuJumboSize | read-write | current | Mtu jumbo frame size. Default value is 1536. |
| 1.3.6.1.4.1.5833.800.2.6.3 | TableiswMirrorAnalyzerTable | not-accessible | current | MirrorAnalyzer table. Max entry size: profile index. |
| 1.3.6.1.4.1.5833.800.2.6.3.1 | RowiswMirrorAnalyzerEntry | not-accessible | current | MirrorAnalyzer entry. |
| 1.3.6.1.4.1.5833.800.2.6.3.1.1 | ColumniswMirrorAnalyzerIdx | not-accessible | current | Profile Index. |
| 1.3.6.1.4.1.5833.800.2.6.3.1.2 | ColumniswMirrorAnalyzerPortID | read-write | current | Mirror analyzerport ID. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.6.4 | TableiswMirrorPortTable | not-accessible | current | MirrorPort table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.6.4.1 | RowiswMirrorPortEntry | not-accessible | current | MirrorPort entry. |
| 1.3.6.1.4.1.5833.800.2.6.4.1.1 | ColumniswMirrorPortIdx | not-accessible | current | Port number. |
| 1.3.6.1.4.1.5833.800.2.6.4.1.2 | ColumniswMirrorPortTxPfIdx | read-write | current | Set Tx profile index, Tx frames of current port would be the source being monitored by Analyzer Port. Value range is 1~7 and none(0). Default is none. |
| 1.3.6.1.4.1.5833.800.2.6.4.1.3 | ColumniswMirrorPortRxPfIdx | read-write | current | Set Rx profile index, Rx frames of current port would be the source being monitored by Analyzer Port. Value range is 1~7 and none(0). Default is none. |
| 1.3.6.1.4.1.5833.800.2.7 | NodeiswRingProtect | |||
| 1.3.6.1.4.1.5833.800.2.7.1 | TableiswRingProtectionTable | not-accessible | current | Ring Protection Table. Max entry size: 3. |
| 1.3.6.1.4.1.5833.800.2.7.1.1 | RowiswRingProtectionEntry | not-accessible | current | Ring Protection entry. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.1 | ColumniswRingProtectRingIndex | not-accessible | current | Index of Ring group. The range is 1, 2 or 3. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.2 | ColumniswRingProtectRingId | read-write | current | Ring id for the ring group. Default value is 1 for Ring group 1, 2 for Ring group 2 and 3 for Ring group 3. RingId for All Ring group can not be the same when … |
| 1.3.6.1.4.1.5833.800.2.7.1.1.3 | ColumniswRingProtectRingMode | read-write | current | Enable/Disable Ring Protect on the specify ring group. If iswStpBridgeModeSet is enabled, set this field to enable will be rejected. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.4 | ColumniswRingProtectRingRole | read-write | current | The Ring role, master or slave. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.5 | ColumniswRingProtectInterConnectMode | read-write | current | Enable/Disable Inter-connect mode on the specify ring group. If two ring's inter-connect mode is enable both, one of the ring node could be the same port. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.6 | ColumniswRingProtectRingNode1 | read-write | current | The port which connect to Ring topology as Node1. Default:1 for Ring group 1 Default:3 for Ring group 2 Default:5 for Ring group 3 All the ring nodes should no… |
| 1.3.6.1.4.1.5833.800.2.7.1.1.7 | ColumniswRingProtectRingNode2 | read-write | current | The port which connect to Ring topology as Node2. Default:2 for Ring group 1 Default:4 for Ring group 2 Default:6 for Ring group 3 All the ring nodes should no… |
| 1.3.6.1.4.1.5833.800.2.7.1.1.8 | ColumniswRingProtectRingNode1SFmode | read-write | current | When iswRingProtectInterConnectMode is enable mode, iswRingProtectRingNode1SFmode could be set as sf or non-sf. When iswRingProtectInterConnectMode is disable … |
| 1.3.6.1.4.1.5833.800.2.7.1.1.9 | ColumniswRingProtectRingNode2SFmode | read-write | current | When iswRingProtectInterConnectMode is enable mode, iswRingProtectRingNode2SFmode could be set as sf or non-sf. When iswRingProtectInterConnectMode is disable … |
| 1.3.6.1.4.1.5833.800.2.7.1.1.10 | ColumniswRingProtectCurrentMasterProtectPort | read-write | current | When iswRingProtectRingRole is master mode, iswRingProtectCurrentMasterProtectPort only accept as node-two. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.11 | ColumniswRingProtectGuardTimerDef | read-write | current | A timer for ring group change back from protect state to normal state. The timer is working when all of the port are link up not broken. Range is 10 ~ 3600, De… |
| 1.3.6.1.4.1.5833.800.2.7.1.1.12 | ColumniswRingProtectRingState | read-only | current | Ring protection state of the specify ring group. Normal means no link error and protection link is blocking. Protect means link error occurs and protection lin… |
| 1.3.6.1.4.1.5833.800.2.7.1.1.13 | ColumniswRingProtectRingNode1Behavior | read-only | current | Ring note 1 port behavior. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.14 | ColumniswRingProtectRingNode2Behavior | read-only | current | Ring note 2 port behavior. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.15 | ColumniswRingProtectRingNode1LinkStatus | read-only | current | Ring note 1 port status. |
| 1.3.6.1.4.1.5833.800.2.7.1.1.16 | ColumniswRingProtectRingNode2LinkStatus | read-only | current | Ring note 2 port status. |
| 1.3.6.1.4.1.5833.800.2.7.2 | TableiswRingDiscoveryTable | not-accessible | current | Ring Protection Table. Max entry size: 3. |
| 1.3.6.1.4.1.5833.800.2.7.2.1 | RowiswRingDiscoveryEntry | not-accessible | current | Ring Protection entry. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.1 | ColumniswRingDiscoveryRingIndex | not-accessible | current | Index of Ring group. The range is 1, 2 or 3. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.2 | ColumniswRingDiscoveryTopologyTimerMode | read-write | current | Enable/Disable the ring neighbor discovery protocol. This parameter only for management purpose. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.3 | ColumniswRingDiscoveryTopologyTimerDef | read-write | current | Discovery timer is the timeout value for count down to send ring neighbor. Discovery protocol to other ring nodes for ring topology discovery purpose. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.4 | ColumniswRingDiscoveryPort1NeighborMac | read-only | current | The MAC address of the Node1's neighbor Switch in the ring If all octets are 0, then treat Neighbor MAC is Unknown. (Maybe the discovery mode is disabled or Ne… |
| 1.3.6.1.4.1.5833.800.2.7.2.1.5 | ColumniswRingDiscoveryPort1NeighborPort | read-only | current | The Port-id of Node1's neighbor switch in the ring. If iswRingDiscoveryPort1NeighborMac is 0x00, then this parameter is Unknown. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.6 | ColumniswRingDiscoveryPort2NeighborMac | read-only | current | The MAC address of the Node2's neighbor Switch in the ring If all octets are 0, then treat Neighbor MAC is Unknown. (Maybe the discovery mode is disabled or Ne… |
| 1.3.6.1.4.1.5833.800.2.7.2.1.7 | ColumniswRingDiscoveryPort2NeighborPort | read-only | current | The Port-id of Node2's neighbor switch in the ring. If iswRingDiscoveryPort1NeighborMac is 0x00, then this parameter is Unknown. |
| 1.3.6.1.4.1.5833.800.2.7.2.1.8 | ColumniswRingDiscoveryMasterMac | read-only | current | The MAC address of the master Switch in the ring If all octets are 0, then treat master MAC is Unknown. |
| 1.3.6.1.4.1.5833.800.2.8 | NodeiswLayer3 | |||
| 1.3.6.1.4.1.5833.800.2.8.1 | NodeiswGateway | |||
| 1.3.6.1.4.1.5833.800.2.8.1.1 | ScalariswMgmtDefaultGateway | read-write | current | Management default gateway. Be careful, if change it, the connection maybe broken. |
| 1.3.6.1.4.1.5833.800.2.8.2 | TableiswStaticRouteTable | not-accessible | current | Static Route table. Max entry size: 32. |
| 1.3.6.1.4.1.5833.800.2.8.2.1 | RowiswStaticRouteEntry | not-accessible | current | Static Route entry. |
| 1.3.6.1.4.1.5833.800.2.8.2.1.1 | ColumniswStaticRouteIndex | not-accessible | current | Static Route table index. Use iswNextStaticRouteIndex to get next available index. |
| 1.3.6.1.4.1.5833.800.2.8.2.1.2 | ColumniswStaticRouteDstIp | read-create | current | Static Route destination IP. |
| 1.3.6.1.4.1.5833.800.2.8.2.1.3 | ColumniswStaticRouteNetmask | read-create | current | Static Route netmask. |
| 1.3.6.1.4.1.5833.800.2.8.2.1.4 | ColumniswStaticRouteGateway | read-create | current | Static Route gateway. |
| 1.3.6.1.4.1.5833.800.2.8.2.1.5 | ColumniswStaticRouteRowStatus | read-create | current | Static Route RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.3 | ScalariswLayer3IpForward | read-write | current | Enable/Disable Layer 3 ip routing/forward. This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.4 | TableiswVlanIntfTable | not-accessible | current | Interface Vlan table. Max entry size: 5. 1st entry is created by default and assign for VLAN 1. (Only support set and can't be deleted.) |
| 1.3.6.1.4.1.5833.800.2.8.4.1 | RowiswVlanIntfEntry | not-accessible | current | Static Route entry. |
| 1.3.6.1.4.1.5833.800.2.8.4.1.1 | ColumniswVlanIfConfIntVlan | not-accessible | current | Vlan interface: vlan. Vlan 1 always exist and can not be deleted. |
| 1.3.6.1.4.1.5833.800.2.8.4.1.2 | ColumniswVlanIfConfIPAddr | read-create | current | IP address for the vlan interface. Default value is 0.0.0.0. |
| 1.3.6.1.4.1.5833.800.2.8.4.1.3 | ColumniswVlanIfConfNetmask | read-create | current | Subnet mask for the vlan interface. The default value is 0.0.0.0. |
| 1.3.6.1.4.1.5833.800.2.8.4.1.4 | ColumniswVlanIfConfMac | read-only | current | MAC address for the vlan interface. |
| 1.3.6.1.4.1.5833.800.2.8.4.1.5 | ColumniswVlanIfConfRowStatus | read-create | current | Vlan interface: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.5 | NodeiswRipConfig | |||
| 1.3.6.1.4.1.5833.800.2.8.5.1 | ScalariswRipConfRipMode | read-write | current | Enable/Disable RIP protocol. |
| 1.3.6.1.4.1.5833.800.2.8.5.2 | ScalariswRipUpdateTime | read-write | current | Routing table update time. |
| 1.3.6.1.4.1.5833.800.2.8.5.3 | ScalariswRipGCTimeout | read-write | current | Garbage collection time. |
| 1.3.6.1.4.1.5833.800.2.8.5.4 | ScalariswRipRouteTimeout | read-write | current | Routing information timeout. |
| 1.3.6.1.4.1.5833.800.2.8.5.5 | TableiswRipVlanIntfTable | not-accessible | current | RIP vlan interface table. For RIP interface configuration. Max interface(entry) size: 5. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1 | RowiswRipVlanIntfEntry | not-accessible | current | RIP vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.1 | ColumniswRipIfConfIntVlan | not-accessible | current | RIP vlan interface: vlan. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.2 | ColumniswRipIfConfAuthType | read-create | current | The type of Authentication used on this interface. The default value is no authentication. This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.3 | ColumniswRipIfConfAuthKey | read-create | current | The Authentication Key. The default value is empty string which is all nulls (0x00). This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.4 | ColumniswRipIfConfSend | read-create | current | The version of RIP packet sent from this interface. The default value is rip-v1. This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.5 | ColumniswRipIfConfReceive | read-create | current | The version of RIP packet which will be received by this interface. The default value is rip-v1orv2. This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.6 | ColumniswRipIfConfSplitHorizon | read-create | current | It is used to control split horizon routing update behavior. The default value is simple. This parameter is optional feature. |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.7 | ColumniswRipIfConfTrackBitmap | read-create | current | Track object bitmap. Byte[0] for track 8 ~ track 1, bit 1 for track object 1, bit 2 for track object 2 and so on. Byte[1] for track 16 ~ track 9, bit 9 for tra… |
| 1.3.6.1.4.1.5833.800.2.8.5.5.1.8 | ColumniswRipIfConfRowStatus | read-create | current | RIP vlan interface: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.5.6 | TableiswRipRedistConfTable | not-accessible | current | Rip Redistribute configuration. Support 3 entries. |
| 1.3.6.1.4.1.5833.800.2.8.5.6.1 | RowiswRipRedistConfEntry | not-accessible | current | RIP vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.8.5.6.1.1 | ColumniswRipRedistSource | not-accessible | current | Rip Redistribute system entry Protocol. |
| 1.3.6.1.4.1.5833.800.2.8.5.6.1.2 | ColumniswRipRedistMetric | read-create | current | Rip Redistribute metric. |
| 1.3.6.1.4.1.5833.800.2.8.5.6.1.3 | ColumniswRipRedistRowStatus | read-create | current | RIP Redistribute: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.6 | NodeiswOspfConfig | |||
| 1.3.6.1.4.1.5833.800.2.8.6.1 | ScalariswOspfEnable | read-write | current | Enable/Disable OSPF protocol. |
| 1.3.6.1.4.1.5833.800.2.8.6.2 | ScalariswOspfAbrType | read-write | current | OSPF ABR Type. Default is cisco type. |
| 1.3.6.1.4.1.5833.800.2.8.6.3 | ScalariswOspfRFC1583Compatible | read-write | current | Enabled/Disabled RFC1583 compatibility. |
| 1.3.6.1.4.1.5833.800.2.8.6.4 | ScalariswOspfRouterId | read-write | current | Router-ID for the OSPF Process. |
| 1.3.6.1.4.1.5833.800.2.8.6.5 | TableiswOspfRedistConfTable | not-accessible | current | OSPF Redistribute configuration. Support 3 entries. |
| 1.3.6.1.4.1.5833.800.2.8.6.5.1 | RowiswOspfRedistConfEntry | not-accessible | current | RIP vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.8.6.5.1.1 | ColumniswOspfRedistSource | not-accessible | current | OSPF Redistribute system entry Protocol. |
| 1.3.6.1.4.1.5833.800.2.8.6.5.1.2 | ColumniswOspfRedistMetricType | read-create | current | External Type |
| 1.3.6.1.4.1.5833.800.2.8.6.5.1.3 | ColumniswOspfRedistMetric | read-create | current | OSPF Redistribute metric. |
| 1.3.6.1.4.1.5833.800.2.8.6.5.1.4 | ColumniswOspfRedistRowStatus | read-create | current | OSPF Redistribute: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.6.6 | TableiswOspfAreaConfTable | not-accessible | current | OSPF Area configure table. Max size: 8. |
| 1.3.6.1.4.1.5833.800.2.8.6.6.1 | RowiswOspfAreaConfEntry | not-accessible | current | OSPF Area configure entry. |
| 1.3.6.1.4.1.5833.800.2.8.6.6.1.1 | ColumniswOspfAreaId | not-accessible | current | OSPF Area Id. Id is unique, and show not equal as iswOspfVLinkAreaId |
| 1.3.6.1.4.1.5833.800.2.8.6.6.1.2 | ColumniswOspfAreaType | read-create | current | External Type |
| 1.3.6.1.4.1.5833.800.2.8.6.6.1.3 | ColumniswOspfAreaNssaEnableTranslateLSA | read-create | current | Enable NSSA translate LSA. This parameter is only valid when ospfAreaType is NSSA or NSSA_NO_SUMMARY |
| 1.3.6.1.4.1.5833.800.2.8.6.6.1.4 | ColumniswOspfAreaRowStatus | read-create | current | OSPF Area: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.6.7 | TableiswOspfVLinkConfTable | not-accessible | current | OSPF virtual-link configure table. Max size: 8. |
| 1.3.6.1.4.1.5833.800.2.8.6.7.1 | RowiswOspfVLinkConfEntry | not-accessible | current | OSPF virtual-link configure entry. |
| 1.3.6.1.4.1.5833.800.2.8.6.7.1.1 | ColumniswOspfVLinkAreaId | not-accessible | current | OSPF virtual-link Area Id. Id is unique, and show not equal as iswOspfAreaId |
| 1.3.6.1.4.1.5833.800.2.8.6.7.1.2 | ColumniswOspfVLinkNeighbor | not-accessible | current | OSPF virtual-link neighbor Id (Address) |
| 1.3.6.1.4.1.5833.800.2.8.6.7.1.3 | ColumniswOspfVLinkRowStatus | read-create | current | OSPF virtual-link: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.6.8 | TableiswOspfNeighborConfTable | not-accessible | current | OSPF neighbor configure table. Max size: 16. |
| 1.3.6.1.4.1.5833.800.2.8.6.8.1 | RowiswOspfNeighborConfEntry | not-accessible | current | OSPF neighbor configure entry. |
| 1.3.6.1.4.1.5833.800.2.8.6.8.1.1 | ColumniswOspfNeighAddress | not-accessible | current | OSPF neighbor Id |
| 1.3.6.1.4.1.5833.800.2.8.6.8.1.2 | ColumniswOspfNeighPollInterval | read-create | current | OSPF neighbor poll-interval, default is 60 |
| 1.3.6.1.4.1.5833.800.2.8.6.8.1.3 | ColumniswOspfNeighPriority | read-create | current | OSPF neighbor priority, default is 0 |
| 1.3.6.1.4.1.5833.800.2.8.6.8.1.4 | ColumniswOspfNeighRowStatus | read-create | current | OSPF neighbor: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.6.9 | TableiswOspfVlanIntfTable | not-accessible | current | OSPF vlan interface table. For OSPF interface configuration. Max interface(entry) size: 5. |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1 | RowiswOspfVlanIntfEntry | not-accessible | current | OSPF vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.1 | ColumniswOspfIfVlanId | not-accessible | current | OSPF vlan interface: vlan. |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.2 | ColumniswOspfIfAreaId | read-create | current | OSPF Vlan Interface Area Id, default is 0 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.3 | ColumniswOspfIfPriority | read-create | current | OSPF Vlan Interface priority, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.4 | ColumniswOspfIfCost | read-create | current | OSPF Vlan Interface cost, default is 10 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.5 | ColumniswOspfIfHelloInterval | read-create | current | OSPF Vlan Interface Time between HELLO packets, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.6 | ColumniswOspfIfDeadInterval | read-create | current | OSPF Vlan Interface Interval after which a neighbor is declared dead, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.7 | ColumniswOspfIfRetransmitInterval | read-create | current | OSPF Vlan Interface Time between retransmitting lost link state advertisements, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.8 | ColumniswOspfIfTransmitDelay | read-create | current | OSPF Vlan Interface Link state transmit delay, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.9 | ColumniswOspfIfNetworkType | read-create | current | OSPF Vlan Interface network type, default is broadcast(2) |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.10 | ColumniswOspfIfMTUIgnoreEnable | read-create | current | OSPF Vlan Interface Link state transmit delay, default is disable |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.11 | ColumniswOspfIfAuthMode | read-create | current | OSPF Vlan Interface Authentication-key Config, default is disable(0) |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.12 | ColumniswOspfIfAuthKey | read-create | current | OSPF Vlan Interface The Authentication Key. The default value is empty string which is all nulls (0x00). |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.13 | ColumniswOspfIfMsgDigestKeyId | read-create | current | OSPF Vlan Interface Message Digest Key-ID, default is 1 |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.14 | ColumniswOspfIfMsgDigestKey | read-create | current | OSPF Vlan Interface Message Digest Key. The default value is empty string which is all nulls (0x00). |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.15 | ColumniswOspfIfTrackBitmap | read-create | current | Track object bitmap. Byte[0] for track 8 ~ track 1 , bit 1 for track object 1, bit 2 for track object 2 and so on. Byte[1] for track 16 ~ track 9 , bit 9 for t… |
| 1.3.6.1.4.1.5833.800.2.8.6.9.1.16 | ColumniswOspfIfRowStatus | read-create | current | OSPF Vlan Interfacee: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.7 | NodeiswVrrpGroupConfig | |||
| 1.3.6.1.4.1.5833.800.2.8.7.1 | TableiswVrrpVlanIntfTable | not-accessible | current | VRRP vlan interface table. For VRRP interface configuration. Max interface(entry) size: 5. |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1 | RowiswVrrpVlanIntfEntry | not-accessible | current | VRRP vlan interface entry. |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.1 | ColumniswVrrpGroupVifId | not-accessible | current | VRRP vlan interface: vlan. |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.2 | ColumniswVrrpGroupVrid | not-accessible | current | VRRP Vlan Interface VRRP Id, default is 0 |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.3 | ColumniswVrrpGroupVirtualRouterAddr | read-create | current | VRRP Vlan Interface Router Address. Virtual router IP should be in same subnet with VLAN interface. The default value is 0.0.0.0. |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.4 | ColumniswVrrpGroupAdvInterval | read-create | current | VRRP Vlan Interface Adv-Interval, default is 10 |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.5 | ColumniswVrrpGroupPriority | read-create | current | VRRP Vlan Interface priority, default is 100 |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.6 | ColumniswVrrpGroupPreempt | read-create | current | VRRP Vlan Interface Group Preempt, default is enable(1) |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.7 | ColumniswVrrpGroupLearnMasterAdvInt | read-create | current | VRRP Vlan Interface Group learn master Adv-interval, default is disable(0) |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.8 | ColumniswVrrpGroupAuthMode | read-create | current | VRRP Vlan Interface Group Preempt, default is disable(0) |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.9 | ColumniswVrrpGroupAuthData | read-create | current | VRRP Vlan Interface Authentication Key. The default value is empty string which is all nulls (0x00). |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.10 | ColumniswVrrpGroupTrackBitmap | read-create | current | Track object bitmap. Byte[0] for track 8 ~ track 1 , bit 1 for track object 1, bit 2 for track object 2 and so on. Byte[1] for track 16 ~ track 9 , bit 9 for t… |
| 1.3.6.1.4.1.5833.800.2.8.7.1.1.11 | ColumniswVrrpGroupRowStatus | read-create | current | VRRP Vlan Interfacee: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.8.8 | NodeiswLayer3Status | |||
| 1.3.6.1.4.1.5833.800.2.8.8.1 | NodeiswRipRoute | |||
| 1.3.6.1.4.1.5833.800.2.8.8.1.1 | TableiswRipRouteTable | not-accessible | current | RIP Route table. Max entry size: 512. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1 | RowiswRipRouteEntry | not-accessible | current | Rip Route entry. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.1 | ColumniswRipRouteIndex | not-accessible | current | The row index of the RIP routing table. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.2 | ColumniswRipRouteVlan | read-only | current | It is the VLAN interface ID also same as the VLAN ID which is the Route of the RIP packet come from VLAN ID. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.3 | ColumniswRipRouteNetwork | read-only | current | The destination network address for the RIP route. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.4 | ColumniswRipRouteNetmask | read-only | current | The network subnet mask for the RIP route. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.5 | ColumniswRipRouteGateway | read-only | current | The next hop gateway address of the RIP route. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.6 | ColumniswRipRouteMetric | read-only | current | It is the metric of the RIP route. The value range is 1 to 16. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.7 | ColumniswRipRouteAging | read-only | current | It is the timeout value of Routing information timeout timer or Garbage collection timer. The timeout type relate to iswRipRouteStatus. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.1.1.8 | ColumniswRipRouteStatus | read-only | current | It is the type of iswRipRouteAging. aging is for Routing information timer stage gc is for Garbage collection timer stage. |
| 1.3.6.1.4.1.5833.800.2.8.8.1.2 | NodeiswRipRouteDeleteCtrl | |||
| 1.3.6.1.4.1.5833.800.2.8.8.1.2.1 | ScalariswRipRouteDeleteVlan | read-write | current | Vlan id for Rip route delete. (deleteByVlan) |
| 1.3.6.1.4.1.5833.800.2.8.8.1.2.2 | ScalariswRipRouteDeleteType | read-write | current | Rip route delete type. |
| 1.3.6.1.4.1.5833.800.2.8.8.2 | TableiswOspfRouteTable | not-accessible | current | OSPF Route table. Max entry size: 512. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1 | RowiswOspfRouteEntry | not-accessible | current | OSPF Route entry. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.1 | ColumniswOspfRouteIndex | not-accessible | current | The row index of the OSPF routing table. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.2 | ColumniswOspfRouteType | read-only | current | 1: network, Type 2: router, Type 3: external |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.3 | ColumniswOspfRouteNetworkPrefix | read-only | current | The network address of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.4 | ColumniswOspfRouteNetworkPrefixLen | read-only | current | The network mask of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.5 | ColumniswOspfRouteNetworkArea | read-only | current | The area Id of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.6 | ColumniswOspfRouteNetworkPathType | read-only | current | The path type of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.7 | ColumniswOspfRouteNetworkCost | read-only | current | The cost of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.8 | ColumniswOspfRouteNetworkNextHopsCount | read-only | current | The hops number of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.9 | ColumniswOspfRouteNetworkNextHops | read-only | current | The hops (address and vlan-interface) of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.10 | ColumniswOspfRouteRouterAddress | read-only | current | The address of router for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.11 | ColumniswOspfRouteRouterArea | read-only | current | The area Id of router for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.12 | ColumniswOspfRouteRouterPathType | read-only | current | The path type of router type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.13 | ColumniswOspfRouteRouterCost | read-only | current | The cost of router type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.14 | ColumniswOspfRouteRouterFlag | read-only | current | The flag of router type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.15 | ColumniswOspfRouteRouterNextHopsCount | read-only | current | The hops number of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.16 | ColumniswOspfRouteRouterNextHops | read-only | current | The hops (address and vlan-interface) of network for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.17 | ColumniswOspfRouteExternalPrefix | read-only | current | The network address of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.18 | ColumniswOspfRouteExternalPrefixLen | read-only | current | The network mask of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.19 | ColumniswOspfRouteExternalArea | read-only | current | The area Id of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.20 | ColumniswOspfRouteExternalPathType | read-only | current | The path type of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.21 | ColumniswOspfRouteExternalCost | read-only | current | The cost of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.22 | ColumniswOspfRouteExternalExtCost | read-only | current | The ext-cost of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.23 | ColumniswOspfRouteExternalTag | read-only | current | The tag of external type for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.24 | ColumniswOspfRouteExternalNextHopsCount | read-only | current | The hops number of external for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.2.1.25 | ColumniswOspfRouteExternalNextHops | read-only | current | The hops (address and vlan-interface) of external for the OSPF route. |
| 1.3.6.1.4.1.5833.800.2.8.8.3 | TableiswOspfDatabaseTable | not-accessible | current | OSPF Database table. Max entry size: 512*4. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1 | RowiswOspfDatabaseEntry | not-accessible | current | OSPF Database entry. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.1 | ColumniswOspfDatabaseIndex | not-accessible | current | The row index of the OSPF database table. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.2 | ColumniswOspfDatabaseRouterId | read-only | current | The router Id for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.3 | ColumniswOspfDatabaseAreaId | read-only | current | The area Id for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.4 | ColumniswOspfDatabaseLSAAge | read-only | current | The LSA age for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.5 | ColumniswOspfDatabaseOptions | read-only | current | The options for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.6 | ColumniswOspfDatabaseLSAFlag | read-only | current | The LSA flag for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.7 | ColumniswOspfDatabaseLSAType | read-only | current | The LSA type for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.8 | ColumniswOspfDatabaseLinkStateId | read-only | current | The link state Id for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.9 | ColumniswOspfDatabaseAdvRouter | read-only | current | The adv-router for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.10 | ColumniswOspfDatabaseLSASeqNumber | read-only | current | The LSA sequence number for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.11 | ColumniswOspfDatabaseChecksum | read-only | current | The checksum for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.12 | ColumniswOspfDatabaseLength | read-only | current | The length for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.13 | ColumniswOspfDatabaseRouterLinks | read-only | current | The links number of database for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.14 | ColumniswOspfDatabaseRouterLinkData | read-only | current | The links data of database for the OSPF database. Data format: [ID/Data/Type/Tos/Metric, ...] |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.15 | ColumniswOspfDatabaseNetworkMask | read-only | current | The network maskfor the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.16 | ColumniswOspfDatabaseNetworkRouters | read-only | current | The netowrk attached routers for the OSPF database. Data format: [router address, ...] |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.17 | ColumniswOspfDatabaseNetworkRouterNumber | read-only | current | The network router number for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.18 | ColumniswOspfDatabaseSummaryMask | read-only | current | The netwrok mask of summary for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.19 | ColumniswOspfDatabaseSummaryTos | read-only | current | The tos of summary for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.20 | ColumniswOspfDatabaseSummaryMetric | read-only | current | The metirc of summary for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.21 | ColumniswOspfDatabaseExternalMask | read-only | current | The mask of external information for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.22 | ColumniswOspfDatabaseExternalTos | read-only | current | The tos of external information for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.23 | ColumniswOspfDatabaseExternalMetric | read-only | current | The metirc of external information for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.24 | ColumniswOspfDatabaseExternalForwardAddr | read-only | current | The forward address of external information for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.3.1.25 | ColumniswOspfDatabaseExternalRouterTag | read-only | current | The router tag of external information for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4 | TableiswOspfNeighborTable | not-accessible | current | OSPF Database table. Max entry size: 512*2. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1 | RowiswOspfNeighborEntry | not-accessible | current | OSPF Database entry. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.1 | ColumniswOspfNeighborIndex | not-accessible | current | The row index of the OSPF neighbor table. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.2 | ColumniswOspfNeighborVlan | read-only | current | The neighbor vlan for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.3 | ColumniswOspfNeighborId | read-only | current | The neighbor Id for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.4 | ColumniswOspfNeighborPriority | read-only | current | The neighbor priority for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.5 | ColumniswOspfNeighborNSM | read-only | current | The neighbor NSM for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.6 | ColumniswOspfNeighborISM | read-only | current | The neighbor ISM for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.7 | ColumniswOspfNeighborDeadTimer | read-only | current | The neighbor deat time for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.8 | ColumniswOspfNeighborSource | read-only | current | The neighbor source address for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.9 | ColumniswOspfNeighborLSRetansCnt | read-only | current | The neighbor LS retans cnt for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.10 | ColumniswOspfNeighborLSReqCnt | read-only | current | The neighbor LS req cnt for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.4.1.11 | ColumniswOspfNeighborDBSumCnt | read-only | current | The neighbor DB sum cnt for the OSPF database. |
| 1.3.6.1.4.1.5833.800.2.8.8.5 | TableiswVrrpGroupStateTable | not-accessible | current | OSPF Database table. Max entry size: 8. |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1 | RowiswVrrpGroupStateEntry | not-accessible | current | OSPF Database entry. |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.1 | ColumniswVrrpGroupStateIndex | not-accessible | current | The row index of the VRRP Group status table. |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.2 | ColumniswVrrpGroupStateVifId | read-only | current | The interface vlan Id for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.3 | ColumniswVrrpGroupStateVrid | read-only | current | The group Id for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.4 | ColumniswVrrpGroupStateVaddr | read-only | current | The virtual IP address for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.5 | ColumniswVrrpGroupStateMac | read-only | current | The virtual MAC address for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.6 | ColumniswVrrpGroupStateState | read-only | current | The group status for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.7 | ColumniswVrrpGroupStatePrio | read-only | current | The priority for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.8 | ColumniswVrrpGroupStatePreempt | read-only | current | The preemption for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.9 | ColumniswVrrpGroupStateLearnMasterAdvInt | read-only | current | The learn master advertisement interval for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.10 | ColumniswVrrpGroupStateAdvInt | read-only | current | The advertisement interval for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.11 | ColumniswVrrpGroupStateRemainTime | read-only | current | The state remain time for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.12 | ColumniswVrrpGroupStateMasterAddr | read-only | current | The master router address for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.13 | ColumniswVrrpGroupStateMasterAdvInt | read-only | current | The master advertisement interval for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.14 | ColumniswVrrpGroupStateMasterDownInt | read-only | current | The master down interval for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.8.5.1.15 | ColumniswVrrpGroupStateMasterPrio | read-only | current | The master priority for the VRRP Group status |
| 1.3.6.1.4.1.5833.800.2.8.9 | NodeiswTrackObjectConfig | |||
| 1.3.6.1.4.1.5833.800.2.8.9.1 | TableiswTrackObjectTable | not-accessible | current | Track object table. Max entry size: 64. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1 | RowiswTrackObjectEntry | not-accessible | current | Track object entry. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.1 | ColumniswTrackObjectIdx | not-accessible | current | Track object index. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.2 | ColumniswTrackObjectType | read-create | current | Track object type. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.3 | ColumniswTrackObjectTarget | read-create | current | Track object target. When iswTrackObjectType is vlan, it means VLAN. When iswTrackObjectType is port, it means Port. When iswTrackObjectType is route, it means… |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.4 | ColumniswTrackObjectPolling | read-create | current | Track object polling time. It is only available when iswTrackObjectType is route. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.5 | ColumniswTrackObjectThreshold | read-create | current | Track object threshold time. It is only available when iswTrackObjectType is route. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.6 | ColumniswTrackObjectStatus | read-only | current | Track object type. |
| 1.3.6.1.4.1.5833.800.2.8.9.1.1.7 | ColumniswTrackObjectRowStatus | read-create | current | Track Object index: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.9 | Nodeisw8021x | |||
| 1.3.6.1.4.1.5833.800.2.9.1 | NodeiswDot1xConfig | |||
| 1.3.6.1.4.1.5833.800.2.9.1.1 | ScalariswDot1xSystemAuthControl | read-write | current | Enable/Disable system dot1x function. |
| 1.3.6.1.4.1.5833.800.2.9.2 | NodeiswDot1xRadiusServer | |||
| 1.3.6.1.4.1.5833.800.2.9.2.1 | ScalariswDot1xServerIp | read-write | current | The IP address of RADIUS server. 0.0.0.0 is 0 which is meaning disable Radius Server. Default is 0.0.0.0. |
| 1.3.6.1.4.1.5833.800.2.9.2.2 | ScalariswDot1xServerAuthPort | read-write | current | The UDP port of RADIUS server for authentication. Default value is 1812. |
| 1.3.6.1.4.1.5833.800.2.9.2.3 | ScalariswDot1xServerSecret | read-write | current | The key is to be used between RADIUS server and Authenticator. The max char size is 16. |
| 1.3.6.1.4.1.5833.800.2.9.3 | NodeiswDot1xPaePort | |||
| 1.3.6.1.4.1.5833.800.2.9.3.1 | TableiswDot1xPaePortConfigTable | not-accessible | current | Pae port authentication configuration table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1 | RowiswDot1xPaePortConfigEntry | not-accessible | current | Pae port authentication configuration entry. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.1 | ColumniswDot1xAuthPaePortId | not-accessible | current | The index of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.2 | ColumniswDot1xAuthControlledPortControl | read-write | current | The authentication type of PAE port. forceUnauthorized (1): The Controlled Port is unauthorized unconditionally and ignore all the authentication operation on … |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.3 | ColumniswDot1xAuthQuietPeriod | read-write | current | The quiet period of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.4 | ColumniswDot1xAuthTxPeriod | read-write | current | The timeout of authenticator waiting for EAP-Response/Identity from supplication of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.5 | ColumniswDot1xAuthMaxReq | read-write | current | The max times of backend Authenticator send EAP-Request to supplicant before restarting the authentication process. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.6 | ColumniswDot1xAuthSuppTimeout | read-write | current | The timeout of authenticator wait for EAP-Response(exclude EAP-Request/Identify) after sending EAP-Request. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.7 | ColumniswDot1xAuthServerTimeout | read-write | current | The timeout of Authenticator wait Access-Challenge/Access-Accept/Access-Reject after sending Access-Request. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.8 | ColumniswDot1xAuthReAuthEnabled | read-write | current | Enable/Disable re-authenticant of APE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.1.1.9 | ColumniswDot1xAuthReAuthPeriod | read-write | current | The period of re-authenticant of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.2 | TableiswDot1xPaePortCommandTable | not-accessible | current | Pae port Command table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.9.3.2.1 | RowiswDot1xPaePortCommandEntry | not-accessible | current | Pae port Command entry. |
| 1.3.6.1.4.1.5833.800.2.9.3.2.1.1 | ColumniswDot1xCommandPaePortId | not-accessible | current | The index of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.2.1.2 | ColumniswDot1xPaePortInitialize | read-write | current | Set Enable to force PAE port re-initialize. Disable no action. When read this parameter, it presents port is in Initialize state or not in the stage. To set en… |
| 1.3.6.1.4.1.5833.800.2.9.3.2.1.3 | ColumniswDot1xPaePortReauthenticate | read-write | current | Set Enable to PAE port re-authenticate. Disable no action. To set enable, please set iswDot1xSystemAuthControl to enable and set iswDot1xAuthControlledPortCont… |
| 1.3.6.1.4.1.5833.800.2.9.3.3 | TableiswDot1xPaePortInfoTable | not-accessible | current | Pae port Info table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.9.3.3.1 | RowiswDot1xPaePortInfoEntry | not-accessible | current | Pae port Info entry. |
| 1.3.6.1.4.1.5833.800.2.9.3.3.1.1 | ColumniswDot1xInfoPaePortId | not-accessible | current | The index of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.3.1.2 | ColumniswDot1xPaePortProtocolVersion | read-only | current | The protocol version of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.3.1.3 | ColumniswDot1xPaePortCapabilities | read-only | current | The capabilities of the PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.4 | TableiswDot1xPaePortStateTable | not-accessible | current | Pae port State table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.2.9.3.4.1 | RowiswDot1xPaePortStateEntry | not-accessible | current | Pae port State entry. |
| 1.3.6.1.4.1.5833.800.2.9.3.4.1.1 | ColumniswDot1xStatePaePortId | not-accessible | current | The index of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.4.1.2 | ColumniswDot1xAuthPaeState | read-only | current | The authenticator status of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.4.1.3 | ColumniswDot1xAuthBackendAuthState | read-only | current | The backend authenticator status of PAE port. |
| 1.3.6.1.4.1.5833.800.2.9.3.4.1.4 | ColumniswDot1xAuthControlledPortStatus | read-only | current | The authentication status of PAE port. Authorized (1) : Allowing all traffic be accessed by the Supplicant end. Unauthorized (2) : Supplicant end is not grante… |
| 1.3.6.1.4.1.5833.800.2.10 | NodeiswLinkAgg | |||
| 1.3.6.1.4.1.5833.800.2.10.1 | TableiswLinkAggTable | not-accessible | current | Link Aggregation table. Max entry size: 4. |
| 1.3.6.1.4.1.5833.800.2.10.1.1 | RowiswLinkAggEntry | not-accessible | current | Link Aggregation entry. |
| 1.3.6.1.4.1.5833.800.2.10.1.1.1 | ColumniswLinkAggTrunkId | not-accessible | current | Link Aggregation trunk id. |
| 1.3.6.1.4.1.5833.800.2.10.1.1.2 | ColumniswLinkAggMember | read-write | current | Port bitmap in the Link Aggregation group. bit0 is not used. bit1 is meaning GEPort-1, bit2 is meaning GEPort-2, bit3 is meaning GEPort-3, ... bit27 is meaning… |
| 1.3.6.1.4.1.5833.800.2.10.1.1.3 | ColumniswLinkAggMode | read-write | current | If set iswLinkAggMode to disable, the value of iswLinkAggMember will be set to 0 and is unsetable. |
| 1.3.6.1.4.1.5833.800.2.11 | NodeiswPTP | |||
| 1.3.6.1.4.1.5833.800.2.11.1 | ScalariswPtpSystemConfMode | read-write | current | disable : Pass through mode, the PTP packets as normal multicast traffic. e2ebc : PTP clock mode is End-to-End boundary clock mode. The default value is disabl… |
| 1.3.6.1.4.1.5833.800.2.11.2 | NodeiswDefaultDB | |||
| 1.3.6.1.4.1.5833.800.2.11.2.1 | ScalariswPtpClockDefaultDSDomainType | read-write | current | The domain attribute of local clock. The default value is 0. |
| 1.3.6.1.4.1.5833.800.2.11.2.2 | ScalariswPtpClockDefaultDSTwoStepFlag | read-only | current | This parameter specifies whether the two-step clock is used. The default value is true(1). |
| 1.3.6.1.4.1.5833.800.2.11.2.3 | ScalariswPtpClockDefaultDSClockIdentity | read-only | current | The default dataset clock identity. The default value is similar to the default MAC address. |
| 1.3.6.1.4.1.5833.800.2.11.2.4 | ScalariswPtpClockDefaultDSQualityClass | read-only | current | The default dataset quality class. The default value is 248. |
| 1.3.6.1.4.1.5833.800.2.11.2.5 | ScalariswPtpClockDefaultDSQualityAccuracy | read-only | current | The default dataset quality accuracy. The default value is 254. |
| 1.3.6.1.4.1.5833.800.2.11.2.6 | ScalariswPtpClockDefaultDSQualityOffset | read-only | current | The default dataset quality offset. The default value is 28768. |
| 1.3.6.1.4.1.5833.800.2.11.2.7 | ScalariswPtpClockDefaultDSPriority1 | read-write | current | The default dataset clock priority1. The default value is 128. The range is 0 ~ 255. |
| 1.3.6.1.4.1.5833.800.2.11.2.8 | ScalariswPtpClockDefaultDSPriority2 | read-write | current | The default dataset clock priority2. The default value is 128. The range is 0 ~ 255. |
| 1.3.6.1.4.1.5833.800.2.11.2.9 | ScalariswPtpClockDefaultDSSlaveOnly | read-only | current | This parameter specifies whether the SlaveOnly flag is set. |
| 1.3.6.1.4.1.5833.800.2.11.3 | NodeiswCurrentDB | |||
| 1.3.6.1.4.1.5833.800.2.11.3.1 | ScalariswPtpClockCurrentDSStepsRemoved | read-only | current | The number of communication paths traversed between the local clock and the grandmaster clock. The default value is 0. |
| 1.3.6.1.4.1.5833.800.2.11.3.2 | ScalariswPtpClockCurrentDSOffsetFromMasterSec | read-only | current | The value of currentDS.offsetFromMaster is an implementation-specific representation of the current value of the time difference between a master and a slave a… |
| 1.3.6.1.4.1.5833.800.2.11.3.3 | ScalariswPtpClockCurrentDSOffsetFromMasterNanoSec | read-only | current | The value of currentDS.offsetFromMaster is an implementation-specific representation of the current value of the time difference between a master and a slave a… |
| 1.3.6.1.4.1.5833.800.2.11.3.4 | ScalariswPtpClockCurrentDSMeanPathDelaySec | read-only | current | The mean path delay between a pair of ports as measure by the delay request-response mechanism. The default value is 0. Some examples for dispaly as below: Cas… |
| 1.3.6.1.4.1.5833.800.2.11.3.5 | ScalariswPtpClockCurrentDSMeanPathDelayNanoSec | read-only | current | The mean path delay between a pair of ports as measure by the delay request-response mechanism. The default value is 0. Some examples for dispaly as below: Cas… |
| 1.3.6.1.4.1.5833.800.2.11.4 | NodeiswParentDB | |||
| 1.3.6.1.4.1.5833.800.2.11.4.1 | ScalariswPtpClockParentDSClockIdentity | read-only | current | The value of clock identity of the port on the master that issues the Sync messages used in synchronizing this clock. The Sync messages are sent from the maste… |
| 1.3.6.1.4.1.5833.800.2.11.4.2 | ScalariswPtpClockParentDSPortNumber | read-only | current | The value of portNumber of the port on the master that issue the Sync messages used in synchronizing this clock. The Sync message are sent from the master of E… |
| 1.3.6.1.4.1.5833.800.2.11.4.3 | ScalariswPtpClockParentDSGMClockIdentity | read-only | current | The value is the clockIdentity attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSClockIdentity. This parameter is updated when recei… |
| 1.3.6.1.4.1.5833.800.2.11.4.4 | ScalariswPtpClockParentDSGMQualityClass | read-only | current | This value is the Quality class attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSQualityClass (248). This parameter is updated when… |
| 1.3.6.1.4.1.5833.800.2.11.4.5 | ScalariswPtpClockParentDSGMQualityAccuracy | read-only | current | This value is the Quality accuracy attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSQualityAccuracy (254). This parameter is update… |
| 1.3.6.1.4.1.5833.800.2.11.4.6 | ScalariswPtpClockParentDSGMQualityOffset | read-only | current | This value is the Quality offset attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSQualityOffset (28768). This parameter is updated … |
| 1.3.6.1.4.1.5833.800.2.11.4.7 | ScalariswPtpClockParentDSGMPriority1 | read-only | current | The value is the Priority1 attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSPriority1 (128). This parameter is updated when receive… |
| 1.3.6.1.4.1.5833.800.2.11.4.8 | ScalariswPtpClockParentDSGMPriority2 | read-only | current | The value is the Priority2 attribute of the grandmaster clock. The default value is iswPtpClockDefaultDSPriority2 (128). This parameter is updated when receive… |
| 1.3.6.1.4.1.5833.800.2.11.5 | NodeiswTimePropertiesDS | |||
| 1.3.6.1.4.1.5833.800.2.11.5.1 | ScalariswPtpClockTimePropertiesDSCurrentUTCOffset | read-only | current | The value of clockThe offset between TAI and UTC. The default value is 0 second. This parameter is updated when receive an Announce message when get new Ebest. |
| 1.3.6.1.4.1.5833.800.2.11.5.2 | ScalariswPtpClockTimePropertiesDSCurrentUTCOffsetValid | read-only | current | This parameter specifies whether current UTC offset is valid. The default value is false(0). This parameter is updated when receive an Announce message when ge… |
| 1.3.6.1.4.1.5833.800.2.11.5.3 | ScalariswPtpClockTimePropertiesDSLeap59 | read-only | current | A true(1) value for Leap59 shall indicate that the last minute of the current UTC day contains 59 seconds. The default value is false(0). This parameter is upd… |
| 1.3.6.1.4.1.5833.800.2.11.5.4 | ScalariswPtpClockTimePropertiesDSLeap61 | read-only | current | A true(1) value for Leap61 shall indicate that the last minute of the current UTC day contains 61 seconds. The default value is false(0). This parameter is upd… |
| 1.3.6.1.4.1.5833.800.2.11.5.5 | ScalariswPtpClockTimePropertiesDSTimeTraceable | read-only | current | A true(1) value of TimeTraceable indicates the timescale and the current UTC Offset are traceable to a primary reference; otherwise, the value shall be false(0… |
| 1.3.6.1.4.1.5833.800.2.11.5.6 | ScalariswPtpClockTimePropertiesDSFreqTraceable | read-only | current | A true(1) value of FreTraceable indicates the frequency determining the timescale is traceable to a primary reference; otherwise, the value shall be false(0). … |
| 1.3.6.1.4.1.5833.800.2.11.5.7 | ScalariswPtpClockTimePropertiesDSPTPTimeScale | read-only | current | A true(1) value of PTPTimeScale indicates the clock timescale of the grandmaster clock is PTP; otherwise, the value shall be false(0). The default value is tru… |
| 1.3.6.1.4.1.5833.800.2.11.5.8 | ScalariswPtpClockTimePropertiesDSGMClockSource | read-only | current | The source of time used by the grandmaster clock. The default value is 0xA0. This parameter is updated when receive an Announce message when get new Ebest. |
| 1.3.6.1.4.1.5833.800.2.11.6 | TableiswPtpClockPortTable | not-accessible | current | Ptp Clock Port table. Max entry size: 8. |
| 1.3.6.1.4.1.5833.800.2.11.6.1 | RowiswPtpClockPortEntry | not-accessible | current | Ptp Clock Port entry. |
| 1.3.6.1.4.1.5833.800.2.11.6.1.1 | ColumniswPtpClockPortId | not-accessible | current | Range is 1..8. (GE-1~GE-8) |
| 1.3.6.1.4.1.5833.800.2.11.6.1.2 | ColumniswPtpLogAnnounceInterval | read-write | current | The parameter specifies the Announce message transmission interval associated with this port. The value of iswPtpLogAnnounceInterval shall be the logarithm to … |
| 1.3.6.1.4.1.5833.800.2.11.6.1.3 | ColumniswPtpAnnounceRctTimeout | read-write | current | The parameter specifies the Announce receipt timeout associated with this port. It means the times of iswPtpLogAnnounceInterval. Default value is 3. Range is 2… |
| 1.3.6.1.4.1.5833.800.2.11.6.1.4 | ColumniswPtpSyncInterval | read-write | current | This parameter specifies the Sync message transmission interval. Default value is 1. (1 seconds) The range is 0 (0.5 second), 1 (1 second), 2 (2 seconds). |
| 1.3.6.1.4.1.5833.800.2.11.6.1.5 | ColumniswPtpMinDelayReqInterval | read-write | current | This parameter specifies the Delay_Req message transmission interval. Default value is 0 (1 second). The range is 0 (1 second), 1 (2 seconds), 2 (4 seconds), 3… |
| 1.3.6.1.4.1.5833.800.2.11.6.1.6 | ColumniswPtpMechanism | read-only | current | The parameter specifies the delay mechanism used. The default value is e2e mode.(End-to-End) |
| 1.3.6.1.4.1.5833.800.2.11.6.1.7 | ColumniswPtpPTPVersion | read-only | current | This parameter specifies the PTP version being used on the port. The default value is v2. |
| 1.3.6.1.4.1.5833.800.2.11.6.1.8 | ColumniswPtpPTPProtocolMode | read-write | current | Enable/Disable PTP protocol on the specify port. The default value is disable(0). |
| 1.3.6.1.4.1.5833.800.2.11.7 | TableiswPtpPortStateTable | not-accessible | current | Ptp Port state table. Max entry size: 8. |
| 1.3.6.1.4.1.5833.800.2.11.7.1 | RowiswPtpPortStateEntry | not-accessible | current | Ptp Port state entry. |
| 1.3.6.1.4.1.5833.800.2.11.7.1.1 | ColumniswPtpPortStatePortId | not-accessible | current | Range is 1..8. (GE-1~GE-8) |
| 1.3.6.1.4.1.5833.800.2.11.7.1.2 | ColumniswPtpRunningPortState | read-only | current | This parameter specifies the port state returned by PTP engine. The default value is disabled. |
| 1.3.6.1.4.1.5833.800.2.11.8 | NodeiswPtpClock | |||
| 1.3.6.1.4.1.5833.800.2.11.8.1 | ScalariswPtpDateTime | read-write | current | PTP date and time. Format: MM/DD/YYYY HH:MM:SS. Fix length. The YYYY range is 2000~2036. |
| 1.3.6.1.4.1.5833.800.2.11.8.2 | ScalariswPtpNanosecond | read-only | current | PTP Nanosecond. |
| 1.3.6.1.4.1.5833.800.2.12 | NodeiswSyncE | |||
| 1.3.6.1.4.1.5833.800.2.12.1 | ScalariswSyncEEnable | read-write | current | SyncE mode. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.12.2 | ScalariswSyncEPrimaryPort | read-write | current | SyncE Primary Port ID. Default value is 1. |
| 1.3.6.1.4.1.5833.800.2.12.3 | ScalariswSyncESecondaryPort | read-write | current | SyncE Secondary Port ID. Default value is 2. |
| 1.3.6.1.4.1.5833.800.2.13 | TableiswPoEControlTable | not-accessible | current | PoE enable/disable control and status |
| 1.3.6.1.4.1.5833.800.2.13.1 | RowiswPoEControlEntry | not-accessible | current | PoE enable/disable control and status |
| 1.3.6.1.4.1.5833.800.2.13.1.1 | ColumniswpoeCtlPortID | not-accessible | current | Range is 1..8. (GE-1~GE-8) |
| 1.3.6.1.4.1.5833.800.2.13.1.2 | ColumniswpoeCtlPortAdmin | read-write | current | Port PoE admin status. Default is ON |
| 1.3.6.1.4.1.5833.800.2.13.1.3 | ColumniswpoeCtlPortStatus | read-only | current | Port PoE power delivery status. OFF means meaning PoE admin status is OFF or PoE Device is not connected to PSE. ON means meaning power is delivered. UNKNOWN m… |
| 1.3.6.1.4.1.5833.800.2.13.1.4 | ColumniswpoeCtlPortClass | read-only | current | PoE class level of Port. The class level is detected from PoE classification. If PoE status is off or unknown, the value would be empty(255). |
| 1.3.6.1.4.1.5833.800.2.13.1.5 | ColumniswportCtlPortPWRConsumption | read-only | current | PoE power consumption per Port. If PoE status is off or unknown, the value would be zero. |
| 1.3.6.1.4.1.5833.800.2.14 | NodeiswDHCPServer | |||
| 1.3.6.1.4.1.5833.800.2.14.1 | ScalariswDHCPSystemMode | read-write | current | DHCP Server mode. Default value is disable (0). |
| 1.3.6.1.4.1.5833.800.2.14.2 | ScalariswDHCPSystemLeasesTime | read-write | current | DHCP Server Lease time. Default value is 86400(1 day). |
| 1.3.6.1.4.1.5833.800.2.14.3 | TableiswDHCPPoolTable | not-accessible | current | DHCP Pool setting |
| 1.3.6.1.4.1.5833.800.2.14.3.1 | RowiswDHCPPoolEntry | not-accessible | current | DHCP Pool setting |
| 1.3.6.1.4.1.5833.800.2.14.3.1.1 | ColumniswDHCPPoolIndex | not-accessible | current | One VLAN Interface can only bind with one DHCP pool. When a DHCP pool matches network subnet of specific VLAN interface, the DHCP pool would be bound to the VL… |
| 1.3.6.1.4.1.5833.800.2.14.3.1.2 | ColumniswDHCPPoolSubnet | read-write | current | Subnet / Netmask must be the same subnet of one of the VLAN interface. Subnet / Netmask are necessary to create a DHCP pool. |
| 1.3.6.1.4.1.5833.800.2.14.3.1.3 | ColumniswDHCPPoolNetmask | read-write | current | Subnet / Netmask must be the same subnet of one of the VLAN interface. Subnet / Netmask are necessary to create a DHCP pool. |
| 1.3.6.1.4.1.5833.800.2.14.3.1.4 | ColumniswDHCPPoolRangeStart | read-write | current | Start - End indicates available range of address for DHCP client. Both Start-IP and End-IP must in the same subnet of the network setting. And the Start-IP mus… |
| 1.3.6.1.4.1.5833.800.2.14.3.1.5 | ColumniswDHCPPoolRangeEnd | read-write | current | Start - End indicates available range of address for DHCP client. Both Start-IP and End-IP must in the same subnet of the network setting. And the Start-IP mus… |
| 1.3.6.1.4.1.5833.800.2.14.3.1.6 | ColumniswDHCPPoolRouter | read-write | current | Default-router in this network. |
| 1.3.6.1.4.1.5833.800.2.14.3.1.7 | ColumniswDHCPPoolDomainName | read-write | current | Domain name of this network. Max. lenghth is 64 characters. |
| 1.3.6.1.4.1.5833.800.2.14.3.1.8 | ColumniswDHCPPoolDNSServer | read-write | current | DNS server of this network. |
| 1.3.6.1.4.1.5833.800.2.14.3.1.9 | ColumniswDHCPPoolLeaseTime | read-write | current | DHCP Pool Lease time. Default value is 86400(1 day). |
| 1.3.6.1.4.1.5833.800.2.14.3.1.10 | ColumniswDHCPPoolRowStatus | read-create | current | DHCP Pool: RowStatus. |
| 1.3.6.1.4.1.5833.800.2.14.4 | TableiswDHCPBindingTable | not-accessible | current | DHCP Binding table |
| 1.3.6.1.4.1.5833.800.2.14.4.1 | RowiswDHCPBindingEntry | not-accessible | current | DHCP Binding entry |
| 1.3.6.1.4.1.5833.800.2.14.4.1.1 | ColumniswDHCPBindingIndex | not-accessible | current | The DHCP binding table contains the IP address, MAC address, start/end time and VLAN interface. |
| 1.3.6.1.4.1.5833.800.2.14.4.1.2 | ColumniswDHCPBindingIPAddress | read-only | current | Lease IP address. |
| 1.3.6.1.4.1.5833.800.2.14.4.1.3 | ColumniswDHCPBindingMAC | read-only | current | Binding MAC address. |
| 1.3.6.1.4.1.5833.800.2.14.4.1.4 | ColumniswDHCPBindingStartTime | read-only | current | Lease start time. |
| 1.3.6.1.4.1.5833.800.2.14.4.1.5 | ColumniswDHCPBindingEndTime | read-only | current | Lease end time. |
| 1.3.6.1.4.1.5833.800.2.14.4.1.6 | ColumniswDHCPBindingVlan | read-only | current | The binding Vlan interface. |
| 1.3.6.1.4.1.5833.800.2.15 | NodeiswGRingProtect | |||
| 1.3.6.1.4.1.5833.800.2.15.1 | NodeiswGRingV2Ring1 | |||
| 1.3.6.1.4.1.5833.800.2.15.1.1 | ScalariswGRingV2Ring1Role | read-write | current | Role of device, accept ring-master or ring-slave. |
| 1.3.6.1.4.1.5833.800.2.15.1.2 | ScalariswGRingV2Ring1Mode | read-write | current | Enable/Disable Ring Protect of ring group 1. |
| 1.3.6.1.4.1.5833.800.2.15.1.3 | ScalariswGRingV2Ring1Node1 | read-write | current | The port in Ring Group 1 as Node1. |
| 1.3.6.1.4.1.5833.800.2.15.1.4 | ScalariswGRingV2Ring1Node2 | read-write | current | The port in Ring Group 1 as Node2. |
| 1.3.6.1.4.1.5833.800.2.15.1.5 | ScalariswGRingV2Ring1State | read-only | current | Ring state. |
| 1.3.6.1.4.1.5833.800.2.15.1.6 | ScalariswGRingV2Ring1Node1Behavior | read-only | current | Node1 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.1.7 | ScalariswGRingV2Ring1Node2Behavior | read-only | current | Node2 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.1.8 | ScalariswGRingV2Ring1Node1LinkStatus | read-only | current | Node1 link status. |
| 1.3.6.1.4.1.5833.800.2.15.1.9 | ScalariswGRingV2Ring1Node2LinkStatus | read-only | current | Node2 link status. |
| 1.3.6.1.4.1.5833.800.2.15.2 | NodeiswGRingV2Ring2 | |||
| 1.3.6.1.4.1.5833.800.2.15.2.1 | ScalariswGRingV2Ring2Role | read-write | current | Role of device, accept ring-master, ring-slave, coupling-primary, coupling-backup, dual-homing. |
| 1.3.6.1.4.1.5833.800.2.15.2.2 | ScalariswGRingV2Ring2Mode | read-write | current | Enable/Disable rules (accept & result): Ring-Group1 Ring-Group2 =============================================== enabled enabled (all) disabled enabled (Ring or… |
| 1.3.6.1.4.1.5833.800.2.15.2.3 | ScalariswGRingV2Ring2Node1 | read-write | current | The port in Ring Group 2 as Node1. |
| 1.3.6.1.4.1.5833.800.2.15.2.4 | ScalariswGRingV2Ring2Node2 | read-write | current | The port in Ring Group 2 as Node2. |
| 1.3.6.1.4.1.5833.800.2.15.2.5 | ScalariswGRingV2Ring2State | read-only | current | Ring state. |
| 1.3.6.1.4.1.5833.800.2.15.2.6 | ScalariswGRingV2Ring2Node1Behavior | read-only | current | Node1 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.2.7 | ScalariswGRingV2Ring2Node2Behavior | read-only | current | Node2 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.2.8 | ScalariswGRingV2Ring2Node1LinkStatus | read-only | current | Node1 link status. |
| 1.3.6.1.4.1.5833.800.2.15.2.9 | ScalariswGRingV2Ring2Node2LinkStatus | read-only | current | Node2 link status. |
| 1.3.6.1.4.1.5833.800.2.15.3 | NodeiswGRingV2Ring3 | |||
| 1.3.6.1.4.1.5833.800.2.15.3.1 | ScalariswGRingV2Ring3Role | read-write | current | Role of device, accept chain-head, chain-tail, chain-member, balancing-chain-terminal-1, balancing-chain-terminal-2, balancing-chain-central-block, balancing-c… |
| 1.3.6.1.4.1.5833.800.2.15.3.2 | ScalariswGRingV2Ring3Mode | read-write | current | Enable/Disable rules: Only if Ring Group 1 and 2 both disabled, then Group 3 accept enable. |
| 1.3.6.1.4.1.5833.800.2.15.3.3 | ScalariswGRingV2Ring3Node1 | read-write | current | The port in Ring Group 3 as Node1. |
| 1.3.6.1.4.1.5833.800.2.15.3.4 | ScalariswGRingV2Ring3Node2 | read-write | current | The port in Ring Group 3 as Node2. |
| 1.3.6.1.4.1.5833.800.2.15.3.5 | ScalariswGRingV2Ring3State | read-only | current | Ring state. |
| 1.3.6.1.4.1.5833.800.2.15.3.6 | ScalariswGRingV2Ring3Node1Behavior | read-only | current | Node1 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.3.7 | ScalariswGRingV2Ring3Node2Behavior | read-only | current | Node2 behavior: blocking or forwarding |
| 1.3.6.1.4.1.5833.800.2.15.3.8 | ScalariswGRingV2Ring3Node1LinkStatus | read-only | current | Node1 link status. |
| 1.3.6.1.4.1.5833.800.2.15.3.9 | ScalariswGRingV2Ring3Node2LinkStatus | read-only | current | Node2 link status. |
| 1.3.6.1.4.1.5833.800.3 | NodeiswSysMgt | |||
| 1.3.6.1.4.1.5833.800.3.3 | TableiswUserStatsTable | not-accessible | current | User stats table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.3.3.1 | RowiswUserStatsEntry | not-accessible | current | User stats entry. |
| 1.3.6.1.4.1.5833.800.3.3.1.1 | ColumniswUserStatsIndex | not-accessible | current | User stats index. |
| 1.3.6.1.4.1.5833.800.3.3.1.2 | ColumniswUserStatsLoginType | read-only | current | User stats login type. |
| 1.3.6.1.4.1.5833.800.3.3.1.3 | ColumniswUserStatsIp | read-only | current | User stats IP. |
| 1.3.6.1.4.1.5833.800.3.3.1.4 | ColumniswUserStatsUserName | read-only | current | User stats user name. |
| 1.3.6.1.4.1.5833.800.3.5 | NodeiswCli | |||
| 1.3.6.1.4.1.5833.800.3.5.1 | NodeiswCLISettings | |||
| 1.3.6.1.4.1.5833.800.3.5.1.1 | ScalariswCLITimeout | read-write | current | CLI settings timeout. Range is 60 ~ 65535, 0 is no timeout. |
| 1.3.6.1.4.1.5833.800.3.5.1.2 | ScalariswCLIMaxSessions | read-write | current | CLI settings max sessions. |
| 1.3.6.1.4.1.5833.800.3.6 | NodeiswSntpGrp | |||
| 1.3.6.1.4.1.5833.800.3.6.1 | NodeiswSntp | |||
| 1.3.6.1.4.1.5833.800.3.6.1.1 | ScalariswSntpPollingInterval | read-write | current | Sntp polling interval. Default value is 0 which meaning sntp polling is disabled. If sntp polling enabled, the range should between 60 to 65535. |
| 1.3.6.1.4.1.5833.800.3.6.1.2 | ScalariswSntpTimeZone | read-write | current | sntp timezone. List: 0 IDL -12:00 International Date Line 1 IDLW -12:00 International Date Line West 2 NT -11:00 Nome Time 3 AHST -10:00 Alaska-Hawaii Standard… |
| 1.3.6.1.4.1.5833.800.3.6.1.3 | ScalariswSntpServerIp | read-write | current | Sntp server IP. |
| 1.3.6.1.4.1.5833.800.3.6.1.4 | ScalariswSntpSync | read-write | current | Sync Date Time with SNTP. Return 0 when get this object. Set sync(1) to trigger SNTP Sync. |
| 1.3.6.1.4.1.5833.800.3.6.2 | NodeiswSysDateTime | |||
| 1.3.6.1.4.1.5833.800.3.6.2.1 | ScalariswSysDate | read-write | current | System date. Format: MM/DD/YYYY. Fix length. The YYYY range is 2000~2036. |
| 1.3.6.1.4.1.5833.800.3.6.2.2 | ScalariswSysTime | read-write | current | System time. Format: HH:MM:SS. Fix length. |
| 1.3.6.1.4.1.5833.800.3.7 | NodeiswSyslog | |||
| 1.3.6.1.4.1.5833.800.3.7.1 | ScalariswSyslogIpAddr | read-write | current | Syslog IP address. |
| 1.3.6.1.4.1.5833.800.3.7.2 | ScalariswSyslogdAction | read-write | current | Service syslogd action. Default value is disable (0). If set enable when syslog already enabled, syslog will be restart. |
| 1.3.6.1.4.1.5833.800.3.8 | NodeiswSysLedStatus | |||
| 1.3.6.1.4.1.5833.800.3.8.1 | ScalariswSystemUnitLedStatus | read-only | current | System unit led status. |
| 1.3.6.1.4.1.5833.800.3.8.2 | ScalariswSystemAlmLedStatus | read-only | current | System alarm led status. |
| 1.3.6.1.4.1.5833.800.3.9 | NodeiswInventory | |||
| 1.3.6.1.4.1.5833.800.3.9.1 | ScalariswInvSnmpAgentVer | read-only | current | This object value presents that current NE by implementation is compliant to which version the SNMP Agent belongs to. |
| 1.3.6.1.4.1.5833.800.3.9.2 | ScalariswInvSwVersion | read-only | current | Inventory SW version. |
| 1.3.6.1.4.1.5833.800.3.9.3 | ScalariswInvInbandDbVersion | read-only | current | Inventory inband database version. |
| 1.3.6.1.4.1.5833.800.3.9.4 | ScalariswInvGenenalDbVersion | read-only | current | Inventory general database version. |
| 1.3.6.1.4.1.5833.800.3.10 | NodeiswHttp | |||
| 1.3.6.1.4.1.5833.800.3.10.1 | ScalariswHttpPort | read-write | current | Http Port. http port number and https port number can't be the same. |
| 1.3.6.1.4.1.5833.800.3.10.2 | ScalariswHttpsPort | read-write | current | Https Port. http port number and https port number can't be the same. |
| 1.3.6.1.4.1.5833.800.3.10.3 | ScalariswHttpServiceOption | read-write | current | Http Service Option. Default is http |
| 1.3.6.1.4.1.5833.800.3.11 | NodeiswSdp | |||
| 1.3.6.1.4.1.5833.800.3.11.1 | ScalariswSdpProductModel | read-only | current | Product Model name. |
| 1.3.6.1.4.1.5833.800.3.11.2 | ScalariswSdpSwVersion | read-only | current | System SW version |
| 1.3.6.1.4.1.5833.800.3.11.3 | ScalariswSdpSwBuild | read-only | current | System SW version built date |
| 1.3.6.1.4.1.5833.800.3.11.4 | ScalariswSdpPhyMac | read-only | current | |
| 1.3.6.1.4.1.5833.800.3.11.5 | ScalariswSdpPortCount | read-only | current | |
| 1.3.6.1.4.1.5833.800.3.11.6 | ScalariswSdpManagedFlag | read-write | current | If it is (1)managed, then alarm LED should be in blink status. If it is (0)un-managed, then alarm LED is normal. Default is (0)un-managed. |
| 1.3.6.1.4.1.5833.800.4 | NodeiswMtnMgt | |||
| 1.3.6.1.4.1.5833.800.4.1 | ScalariswSysRestart | read-write | current | System restart. Always return 0 when read. |
| 1.3.6.1.4.1.5833.800.4.2 | ScalariswSysSaveConfig | read-write | current | This object used to show and trigger DB save and restore action. Save inband configuration and runtime configuration as active database (configuration for next… |
| 1.3.6.1.4.1.5833.800.4.3 | ScalariswSysSaveConfigInbandIdx | read-write | current | Inband DB index for CLI config action. Set iswSysSaveConfig as config-restore-by-index(2), system load the specific inband cfg as runningcfg. Set iswSysSaveCon… |
| 1.3.6.1.4.1.5833.800.4.4 | ScalariswSysSaveConfigGenIdx | read-write | current | Genral DB index for CLI config action. Set iswSysSaveConfig as config-restore-by-index(2), system load the specific general cfg as running cfg. Set iswSysSaveC… |
| 1.3.6.1.4.1.5833.800.4.5 | NodeiswDBSaveRestore | |||
| 1.3.6.1.4.1.5833.800.4.5.1 | TableiswDBSaveRestoreInbandTable | not-accessible | current | DB save restore inband table. Max entry size: 16. |
| 1.3.6.1.4.1.5833.800.4.5.1.1 | RowiswDBSaveRestoreInbandEntry | not-accessible | current | DB save restore inband entry. |
| 1.3.6.1.4.1.5833.800.4.5.1.1.1 | ColumniswDBSaveRestoreInbandIndex | not-accessible | current | DB save restore inband index. |
| 1.3.6.1.4.1.5833.800.4.5.1.1.2 | ColumniswDBSaveRestoreInbandName | read-only | current | DB save restore inband name. |
| 1.3.6.1.4.1.5833.800.4.5.1.1.3 | ColumniswDBSaveRestoreInbandSize | read-only | current | DB save restore inband size. |
| 1.3.6.1.4.1.5833.800.4.5.1.1.4 | ColumniswDBSaveRestoreInbandUncpSize | read-only | current | DB save restore inband uncompressed size. |
| 1.3.6.1.4.1.5833.800.4.5.2 | TableiswDBSaveRestoreGeneralTable | not-accessible | current | DB save restore general table. Max entry size: 16. |
| 1.3.6.1.4.1.5833.800.4.5.2.1 | RowiswDBSaveRestoreGeneralEntry | not-accessible | current | DB save restore general entry. |
| 1.3.6.1.4.1.5833.800.4.5.2.1.1 | ColumniswDBSaveRestoreGeneralIndex | not-accessible | current | DB save restore general index. |
| 1.3.6.1.4.1.5833.800.4.5.2.1.2 | ColumniswDBSaveRestoreGeneralName | read-only | current | DB save restore general name. |
| 1.3.6.1.4.1.5833.800.4.5.2.1.3 | ColumniswDBSaveRestoreGeneralSize | read-only | current | DB save restore general size. |
| 1.3.6.1.4.1.5833.800.4.5.2.1.4 | ColumniswDBSaveRestoreGeneralUncpSize | read-only | current | DB save restore general uncompressed size. |
| 1.3.6.1.4.1.5833.800.4.5.3 | ScalariswDBSaveRestoreActiveIndex | read-only | current | DB save restore active index. |
| 1.3.6.1.4.1.5833.800.4.5.4 | ScalariswDBSaveRestoreBootIndex | read-only | current | DB save restore boot index. |
| 1.3.6.1.4.1.5833.800.4.5.5 | ScalariswDBSaveRestoreEntryCount | read-only | current | DB save restore entry count. |
| 1.3.6.1.4.1.5833.800.4.5.6 | ScalariswDBSaveRestoreGenActiveIndex | read-only | current | DB save restore active index. |
| 1.3.6.1.4.1.5833.800.4.5.7 | ScalariswDBSaveRestoreGenBootIndex | read-only | current | DB save restore boot index. |
| 1.3.6.1.4.1.5833.800.4.5.8 | ScalariswDBSaveRestoreGenEntryCount | read-only | current | DB save restore entry count. |
| 1.3.6.1.4.1.5833.800.4.6 | NodeiswMtnFirmware | |||
| 1.3.6.1.4.1.5833.800.4.6.1 | NodeiswFWDownload | |||
| 1.3.6.1.4.1.5833.800.4.6.1.1 | ScalariswRemoteDlAction | read-write | current | Active image/bootloader remote download with Reboot or no reboot after remote download. Before this action, please set iswFTPServer parameters properly for FTP… |
| 1.3.6.1.4.1.5833.800.4.6.1.2 | ScalariswRemoteDlImageStatus | read-only | current | Image remote download status. |
| 1.3.6.1.4.1.5833.800.4.6.1.3 | ScalariswRemoteDlBootloaderStatus | read-only | current | Bootloader remote download status. |
| 1.3.6.1.4.1.5833.800.4.6.2 | TableiswFWInfoTable | not-accessible | current | FW information table. Max entry size: 2. |
| 1.3.6.1.4.1.5833.800.4.6.2.1 | RowiswFWInfoEntry | not-accessible | current | FW information entry. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.1 | ColumniswFWInfoIndex | not-accessible | current | FW information. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.2 | ColumniswFWInfoVersion | read-only | current | FW information version. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.3 | ColumniswFWInfoDate | read-only | current | FW information date. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.4 | ColumniswFWInfoName | read-only | current | FW information name. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.5 | ColumniswFWInfoActive | read-only | current | Show the partition is active or not. |
| 1.3.6.1.4.1.5833.800.4.6.2.1.6 | ColumniswFWInfoNextBoot | read-write | current | In write case, set partition as active to switch next boot partition. |
| 1.3.6.1.4.1.5833.800.4.6.3 | TableiswFWUpgradeScheduleTable | not-accessible | current | FW schedule upgrade Table. Max entry size: 1. |
| 1.3.6.1.4.1.5833.800.4.6.3.1 | RowiswFWUpgradeScheduleEntry | not-accessible | current | FW schedule upgrade entry. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.1 | ColumniswFWUpgradeScheduleIndex | not-accessible | current | FW schedule upgrade index. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.2 | ColumniswFWUpgradeScheduleTime | read-create | current | Time for FW scheduled upgrade (must be within follow 30 days) Format must be MM/DD/YYYY HH:MM:SS Example: 03/20/2013 18:30:20 |
| 1.3.6.1.4.1.5833.800.4.6.3.1.3 | ColumniswFWUpgradeScheduleServerIp | read-create | current | FW upgrade schedule server IP. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.4 | ColumniswFWUpgradeScheduleUserName | read-create | current | FW upgrade schedule user name. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.5 | ColumniswFWUpgradeScheduleUserPassword | read-create | current | FW upgrade schedule user password. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.6 | ColumniswFWUpgradeScheduleFileName | read-create | current | FW upgrade schedule file name. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.7 | ColumniswFWUpgradeScheduleOption | read-create | current | FW upgrade schedule option. |
| 1.3.6.1.4.1.5833.800.4.6.3.1.8 | ColumniswFWUpgradeScheduleRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.5833.800.4.7 | ScalariswRestartSNMPAgent | read-write | current | SNMP Agent Restart. Set active(1) to Restart SNMP Agent After SNMP Agent is restarted, the configuration of following 4 tables will take effect. snmpCommunityT… |
| 1.3.6.1.4.1.5833.800.4.8 | NodeiswFTPServer | |||
| 1.3.6.1.4.1.5833.800.4.8.1 | ScalariswFTPServerIp | read-write | current | FTP or TFTP serve IP address. |
| 1.3.6.1.4.1.5833.800.4.8.2 | ScalariswFTPUserName | read-write | current | FTP user name. |
| 1.3.6.1.4.1.5833.800.4.8.3 | ScalariswFTPUserPassword | read-write | current | FTP user password. |
| 1.3.6.1.4.1.5833.800.4.8.4 | ScalariswFTPFileName | read-write | current | FTP or TFTP file name used by iswSysSaveConfig or iswRemoteDlAction. |
| 1.3.6.1.4.1.5833.800.4.9 | ScalariswSysSaveConfigInbandName | read-write | current | Specify naming of database that stores the inband IP configuration. Set this object before further action you will choose on iswSysSaveConfig. iswSysSaveConfig… |
| 1.3.6.1.4.1.5833.800.4.10 | ScalariswSysSaveConfigGenName | read-write | current | Specify naming of database that stores the runtime configuration. Set this object before further action you will choose on iswSysSaveConfig. iswSysSaveConfig: … |
| 1.3.6.1.4.1.5833.800.4.11 | NodeiswSysTemperature | |||
| 1.3.6.1.4.1.5833.800.4.11.1 | ScalariswCurrentCpuTemperature | read-only | current | Current cpu temperature. |
| 1.3.6.1.4.1.5833.800.4.11.2 | ScalariswUpShiftThreshold | read-write | current | Temperature threshold of system high temperature alarm. |
| 1.3.6.1.4.1.5833.800.4.11.3 | ScalariswUpShiftTime | read-write | current | This threshold is a time interval used to judge alarm is on/set. If system current temperature exceeds the 'Up Shift Threshold' and remain for time of 'Up Shif… |
| 1.3.6.1.4.1.5833.800.4.11.4 | ScalariswDownShiftThreshold | read-write | current | Temperature threshold of system low temperature alarm. |
| 1.3.6.1.4.1.5833.800.4.11.5 | ScalariswDownShiftTime | read-write | current | This threshold is a time interval used to judge alarm is off/cleared. If system current temperature lower than the 'Down Shift Threshold' and remain for time o… |
| 1.3.6.1.4.1.5833.800.5 | NodeiswPerform | |||
| 1.3.6.1.4.1.5833.800.5.1 | NodeiswPortStats | |||
| 1.3.6.1.4.1.5833.800.5.1.1 | TableiswIfStatsTable | not-accessible | current | Interface statistic table. Max entry size: 10. |
| 1.3.6.1.4.1.5833.800.5.1.1.1 | RowiswIfStatsEntry | not-accessible | current | If entry. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.1 | ColumniswIfIndex | not-accessible | current | If index. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.2 | ColumniswIfInDiscards | read-only | current | If income discards. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.3 | ColumniswIfInErrors | read-only | current | If income errors. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.4 | ColumniswIfOutDiscards | read-only | current | If out discards. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.5 | ColumniswIfOutErrors | read-only | current | If out errors. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.6 | ColumniswIfxHCInOctets | read-only | current | Ifx HC In octets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.7 | ColumniswIfxHCInUcastPkts | read-only | current | Ifx HC In ucast packets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.8 | ColumniswIfxHCInMulticastPkts | read-only | current | Ifx HC In multicast packets |
| 1.3.6.1.4.1.5833.800.5.1.1.1.9 | ColumniswIfxHCInBroadcastPkts | read-only | current | Ifx HC In broadcast packets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.10 | ColumniswIfxHCOutOctets | read-only | current | Ifx HC Out octets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.11 | ColumniswIfxHCOutUcastPkts | read-only | current | Ifx HC Out ucast packets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.12 | ColumniswIfxHCOutMulticastPkts | read-only | current | Ifx HC Out multicast packets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.13 | ColumniswIfxHCOutBroadcastPkts | read-only | current | Ifx HC Out broadcast packets. |
| 1.3.6.1.4.1.5833.800.5.1.1.1.14 | ColumniswIfTableClearStats | read-write | current | Set statistics as zero. |
| 1.3.6.1.4.1.5833.800.5.1.2 | TableiswEtherStatsTable | not-accessible | current | Ethernet stats table. Max entry size: port number. |
| 1.3.6.1.4.1.5833.800.5.1.2.1 | RowiswEtherStatsEntry | not-accessible | current | Ethernet stats entry. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.1 | ColumniswEtherStatsIfindex | not-accessible | current | Ethernet stats index. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.2 | ColumniswEtherStatsDropEvents | read-only | current | Ethernet stats drop events. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.3 | ColumniswEtherStatsOctets | read-only | current | Ethernet stats octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.4 | ColumniswEtherStatsPkts | read-only | current | Ethernet stats packets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.5 | ColumniswEtherStatsBroadcastPkts | read-only | current | Ethernet stats broadcast packets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.6 | ColumniswEtherStatsMulticastPkts | read-only | current | Ethernet stats multicast packets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.7 | ColumniswEtherStatsCRCAlignErrors | read-only | current | Ethernet stats CRC align errors. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.8 | ColumniswEtherStatsUndersizePkts | read-only | current | Ethernet stats under size packets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.9 | ColumniswEtherStatsOversizePkts | read-only | current | Ethernet stats oversize packets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.10 | ColumniswEtherStatsFragments | read-only | current | Ethernet stats fragments. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.11 | ColumniswEtherStatsJabbers | read-only | current | Ethernet stats jabbers. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.12 | ColumniswEtherStatsCollisions | read-only | current | Ethernet stats collisions. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.13 | ColumniswEtherStatsPkts64Octets | read-only | current | Ethernet stats packets 64 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.14 | ColumniswEtherStatsPks65to127Octets | read-only | current | Ethernet stats packets 65 to 127 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.15 | ColumniswEtherStatsPkts128to255Octets | read-only | current | Ethernet stats packets 128 to 255 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.16 | ColumniswEtherStatsPkts256to511Octets | read-only | current | Ethernet stats packets 256 to 511 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.17 | ColumniswEtherStatsPkts512to1023Octets | read-only | current | Ethernet stats packets 512 to 1023 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.18 | ColumniswEtherStatsPkts1024to1518Octets | read-only | current | Ethernet stats packets 1024 to 1518 octets. |
| 1.3.6.1.4.1.5833.800.5.1.2.1.19 | ColumniswEtherStatsClear | read-write | current | Set Ethernet stats as zero. |
| 1.3.6.1.4.1.5833.800.5.2 | NodeiswDot1xStatistics | |||
| 1.3.6.1.4.1.5833.800.5.2.1 | TableiswDot1xAuthEapolStatsTable | not-accessible | current | Table of Authenticator statistics counters. A table that contains the statistics objects for the Authenticator PAE associated with each Ethernet Port. An entry… |
| 1.3.6.1.4.1.5833.800.5.2.1.1 | RowiswDot1xAuthEapolStatsEntry | not-accessible | current | AuthEapol Stats entry. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.1 | ColumniswDot1xAuthEapolStatsPortId | not-accessible | current | The index of port. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.2 | ColumniswDot1xAuthEapolFramesRx | read-only | current | The number of valid EAPOL frames of any type that have been received. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.3 | ColumniswDot1xAuthEapolFramesTx | read-only | current | The number of EAPOL frames of any type that have been transmitted. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.4 | ColumniswDot1xAuthEapolStartFramesRx | read-only | current | The number of EAPOL Start frames that have been received. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.5 | ColumniswDot1xAuthEapolLogoffFramesRx | read-only | current | The number of EAPOL Logoff frames that have been received. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.6 | ColumniswDot1xAuthEapolRespIdFramesRx | read-only | current | The number of EAP Resp/Id frames that have been received. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.7 | ColumniswDot1xAuthEapolRespFramesRx | read-only | current | The number of valid EAP Response frames(other than Resp/Id frames) that have been received. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.8 | ColumniswDot1xAuthEapolReqIdFramesTx | read-only | current | The number of EAP Req/Id frames that have been transmitted. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.9 | ColumniswDot1xAuthEapolReqFramesTx | read-only | current | The number of EAP Request frames(other than Req/Id frames) that have been transmitted. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.10 | ColumniswDot1xAuthInvalidEapolFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.11 | ColumniswDot1xAuthEapLengthErrorFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. |
| 1.3.6.1.4.1.5833.800.5.2.1.1.12 | ColumniswDot1xAuthLastEapolFrameVersion | read-only | current | The protocol version number carried in the most recently received EAPOL frame. |
| 1.3.6.1.4.1.5833.800.5.2.2 | NodeiswDot1xAuthEapolStatsClearCtrl | |||
| 1.3.6.1.4.1.5833.800.5.2.2.1 | ScalariswDot1xAuthEapolStatsClearPortId | read-write | current | Port id for Dot1x Auth Eapol Stats clear. (clearByPort) |
| 1.3.6.1.4.1.5833.800.5.2.2.2 | ScalariswDot1xAuthEapolStatsClearType | read-write | current | Type of Dot1x Auth Eapol Stats clear. |
| 1.3.6.1.4.1.5833.800.5.2.3 | TableiswDot1xRadiusStatsTable | not-accessible | current | Table of RADIUS statistics counters. It contains the statistics objects for the Authenticator associated with RADIUS Server. Max entry size: 1. |
| 1.3.6.1.4.1.5833.800.5.2.3.1 | RowiswDot1xRadiusStatsEntry | not-accessible | current | Radius Stats entry. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.1 | ColumniswDot1xRadiusServerId | not-accessible | current | The index of Radius Server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.2 | ColumniswDot1xRadiusAuthClientAccessRequests | read-only | current | The number of RADIUS Access-Request sent to RADIUS server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.3 | ColumniswDot1xRadiusAuthClientAccessAccepts | read-only | current | The number of RADIUS Access-Accept received from RADIUS server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.4 | ColumniswDot1xRadiusAuthClientAccessRejects | read-only | current | The number of RADIUS Access-Reject received from RADIUS server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.5 | ColumniswDot1xRadiusAuthClientAccessChallenges | read-only | current | The number of RADIUS Access-Challenge received from RADIUS server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.6 | ColumniswDot1xRadiusAuthClientBadAuthenticators | read-only | current | The number of invalid RADIUS response packet received from RADIUS server. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.7 | ColumniswDot1xRadiusAuthClientTimeouts | read-only | current | The number server timeout happened on Backend Authentication state machine. |
| 1.3.6.1.4.1.5833.800.5.2.3.1.8 | ColumniswDot1xRadiusAuthClientPacketsDropped | read-only | current | The number of packet from RADIUS server to be silent drop by Authenticator. |
| 1.3.6.1.4.1.5833.800.5.2.4 | ScalariswDot1xRadiusStatsClear | read-write | current | Clear Authenticator Backend statistics counters. |
| 1.3.6.1.4.1.5833.800.6 | NodeiswEvtMgt | |||
| 1.3.6.1.4.1.5833.800.6.1 | TableiswEventTable | not-accessible | current | The Event Log table. |
| 1.3.6.1.4.1.5833.800.6.1.1 | RowiswEventEntry | not-accessible | current | An Entry in the Event table. |
| 1.3.6.1.4.1.5833.800.6.1.1.1 | ColumniswEventRowId | not-accessible | current | This object indicates the row index in table. |
| 1.3.6.1.4.1.5833.800.6.1.1.2 | ColumniswEventSeqId | read-only | current | This object indicates the sequnce index in table, when new event generated, index increases. |
| 1.3.6.1.4.1.5833.800.6.1.1.3 | ColumniswEventEntPhyIndex | read-only | current | This attribute indicates the occurrence entity. system(1), main-card(2), gbe-card(3) |
| 1.3.6.1.4.1.5833.800.6.1.1.4 | ColumniswEventIfIndex | read-only | current | This attribute indicates the occurrence interface. |
| 1.3.6.1.4.1.5833.800.6.1.1.5 | ColumniswEventTypeId | read-only | current | This attribute indicates the number of event type. |
| 1.3.6.1.4.1.5833.800.6.1.1.6 | ColumniswEventTime | read-only | current | This attribute indicates the event occurence time. |
| 1.3.6.1.4.1.5833.800.6.1.1.7 | ColumniswEventUserLoginIp | read-only | current | Information for use login event iswSystemUserLoginSuccess(26), iswSystemUserLoginFailure(27), iswSystemUserLogoutSystem(28), iswSystemUserTimeoutLogout(29), |
| 1.3.6.1.4.1.5833.800.6.1.1.8 | ColumniswEventUserLoginMethod | read-only | current | Information for use login event iswSystemUserLoginSuccess(26), iswSystemUserLoginFailure(27), iswSystemUserLogoutSystem(28), iswSystemUserTimeoutLogout(29), |
| 1.3.6.1.4.1.5833.800.6.1.1.9 | ColumniswEventUserLoginName | read-only | current | Information for use login event iswSystemUserLoginSuccess(26), iswSystemUserLoginFailure(27), iswSystemUserLogoutSystem(28), iswSystemUserTimeoutLogout(29), |
| 1.3.6.1.4.1.5833.800.6.2 | ScalariswEventClear | read-write | current | Set this object active to clear system event log. |
| 1.3.6.1.4.1.5833.800.7 | NodeiswAlmMgt | |||
| 1.3.6.1.4.1.5833.800.7.1 | TableiswCurrentAlarmTable | not-accessible | current | The Current Alarm table. |
| 1.3.6.1.4.1.5833.800.7.1.1 | RowiswCurrentAlarmEntry | not-accessible | current | An Entry in the Event table. |
| 1.3.6.1.4.1.5833.800.7.1.1.1 | ColumniswCurrentAlarmRowId | read-only | current | This object indicates the row index in table. |
| 1.3.6.1.4.1.5833.800.7.1.1.2 | ColumniswCurrentAlarmSeqId | read-only | current | This object indicates the sequence index in table, when new alarm generated, index increases. |
| 1.3.6.1.4.1.5833.800.7.1.1.3 | ColumniswCurrentAlarmTypeId | read-only | current | This attribute indicates the number of alarm type. |
| 1.3.6.1.4.1.5833.800.7.1.1.4 | ColumniswCurrentAlarmIfIndex | read-only | current | This attribute indicates the occurrence interface. |
| 1.3.6.1.4.1.5833.800.7.1.1.5 | ColumniswCurrentAlarmLevel | read-only | current | This attribute indicates the alarm level. |
| 1.3.6.1.4.1.5833.800.7.1.1.6 | ColumniswCurrentAlarmState | read-only | current | This attribute indicates the alarm state. |
| 1.3.6.1.4.1.5833.800.7.1.1.7 | ColumniswCurrentAlarmTime | read-only | current | This attribute indicates the alarm occurence time. |
| 1.3.6.1.4.1.5833.800.7.2 | TableiswHistoryAlarmTable | not-accessible | current | The History(Log) Alarm table. |
| 1.3.6.1.4.1.5833.800.7.2.1 | RowiswHistoryAlarmEntry | not-accessible | current | An Entry in the Event hisotry table. |
| 1.3.6.1.4.1.5833.800.7.2.1.1 | ColumniswHistoryAlarmRowId | read-only | current | This object indicates the row index in table. |
| 1.3.6.1.4.1.5833.800.7.2.1.2 | ColumniswHistoryAlarmSeqId | read-only | current | This object indicates the sequence index in table, when new alarm generated/cleard, index increases. |
| 1.3.6.1.4.1.5833.800.7.2.1.3 | ColumniswHistoryAlarmTypeId | read-only | current | This attribute indicates the number of alarm type. |
| 1.3.6.1.4.1.5833.800.7.2.1.4 | ColumniswHistoryAlarmIfIndex | read-only | current | This attribute indicates the occurrence interface. |
| 1.3.6.1.4.1.5833.800.7.2.1.5 | ColumniswHistoryAlarmLevel | read-only | current | This attribute indicates the alarm level. |
| 1.3.6.1.4.1.5833.800.7.2.1.6 | ColumniswHistoryAlarmState | read-only | current | This attribute indicates the alarm state. |
| 1.3.6.1.4.1.5833.800.7.2.1.7 | ColumniswHistoryAlarmTime | read-only | current | This attribute indicates the alarm occurence time. |
| 1.3.6.1.4.1.5833.800.7.3 | ScalariswAlarmClear | read-write | current | Set this object active to clear system alarm log. |
| 1.3.6.1.4.1.5833.800.7.4 | TableiswAlarmProfileTable | not-accessible | current | Define all Alarm Profile ID, Mask, and Level. |
| 1.3.6.1.4.1.5833.800.7.4.1 | RowiswAlarmProfileEntry | not-accessible | current | Define all Alarm Profile ID, Mask, and Level. |
| 1.3.6.1.4.1.5833.800.7.4.1.1 | ColumniswAlarmTypeId | read-only | current | Alarm Profile Id |
| 1.3.6.1.4.1.5833.800.7.4.1.2 | ColumniswAlarmMask | read-write | current | Alarm Profile Mask/UnMask, default is Mask |
| 1.3.6.1.4.1.5833.800.7.4.1.3 | ColumniswAlarmLevel | read-write | current | Alarm Profile Major/Minor, default is Minor |
| 1.3.6.1.4.1.5833.800.8 | NodeiswTraps | |||
| 1.3.6.1.4.1.5833.800.8.1 | NodeiswEventTraps | |||
| 1.3.6.1.4.1.5833.800.8.1.1 | NodeiswEventSystemTraps | |||
| 1.3.6.1.4.1.5833.800.8.1.1.1 | NotificationiswTrapEvtSysRestart | current | System receives Restart command from CLI/SNMP/Web. | |
| 1.3.6.1.4.1.5833.800.8.1.1.2 | NotificationiswTrapEvtSysDownloadBegin | current | Firmware download begin. | |
| 1.3.6.1.4.1.5833.800.8.1.1.3 | NotificationiswTrapEvtSysDownloadSuccess | current | Firmware download Success. | |
| 1.3.6.1.4.1.5833.800.8.1.1.4 | NotificationiswTrapEvtSysDownloadFail | current | Firmware download Fail. | |
| 1.3.6.1.4.1.5833.800.8.1.1.5 | NotificationiswTrapEvtSysProvisiondataExport | current | System CLI configuration export. | |
| 1.3.6.1.4.1.5833.800.8.1.1.6 | NotificationiswTrapEvtSysProvisiondataImport | current | System CLI configuration import. | |
| 1.3.6.1.4.1.5833.800.8.1.1.7 | NotificationiswTrapEvtSysProvisiondataSetdefault | current | System configuration set to default. | |
| 1.3.6.1.4.1.5833.800.8.1.1.8 | NotificationiswTrapEvtSysAlarmLogClear | current | System alarm log table clear. | |
| 1.3.6.1.4.1.5833.800.8.1.1.9 | NotificationiswTrapEvtSysEventLogClear | current | System event log table clear. | |
| 1.3.6.1.4.1.5833.800.8.1.1.10 | NotificationiswTrapEvtSysRTCDateTimeChange | current | System Real Time Clock time change. | |
| 1.3.6.1.4.1.5833.800.8.1.1.11 | NotificationiswTrapEvtSystemAlarmProfileChagne | current | System Alarm Profile change. | |
| 1.3.6.1.4.1.5833.800.8.1.1.12 | NotificationiswTrapEvtSysFTPReceptionStart | current | FTP Reception Start | |
| 1.3.6.1.4.1.5833.800.8.1.1.13 | NotificationiswTrapEvtSysFTPReceptionComplete | current | FTP Reception Complete. | |
| 1.3.6.1.4.1.5833.800.8.1.1.14 | NotificationiswTrapEvtSysFTPReceptionIncomplete | current | FTP Reception Incomplete. | |
| 1.3.6.1.4.1.5833.800.8.1.1.15 | NotificationiswTrapEvtSysSNTPTimeZoneChange | current | SNTP Time Zone Change. | |
| 1.3.6.1.4.1.5833.800.8.1.1.16 | NotificationiswTrapEvtSysSNTPProvisionChanged | current | SNTP Provision Changed. | |
| 1.3.6.1.4.1.5833.800.8.1.1.17 | NotificationiswTrapEvtSysDatabaseSavingFailed | current | Database Saving Failed. | |
| 1.3.6.1.4.1.5833.800.8.1.1.18 | NotificationiswTrapEvtSysUserLoginSuccess | current | User Login Success. | |
| 1.3.6.1.4.1.5833.800.8.1.1.19 | NotificationiswTrapEvtSysUserLoginFailure | current | User Login Failure. | |
| 1.3.6.1.4.1.5833.800.8.1.1.20 | NotificationiswTrapEvtSysUserLogoutSystem | current | User Logout. | |
| 1.3.6.1.4.1.5833.800.8.1.1.21 | NotificationiswTrapEvtSysUserTimeoutLogout | current | User kick-out due to timeout. | |
| 1.3.6.1.4.1.5833.800.8.1.1.22 | NotificationiswTrapEvtSysAlarmLEDOn | current | System Alarm LED On. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.1.1.23 | NotificationiswTrapEvtSysAlarmLEDOff | current | System Alarm LED Off. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.1.2 | NodeiswEventPortTraps | |||
| 1.3.6.1.4.1.5833.800.8.1.2.1 | NotificationiswTrapEvtPortLinkup | current | Specific GE/FE port link up. | |
| 1.3.6.1.4.1.5833.800.8.1.2.2 | NotificationiswTrapEvtPortLinkdown | current | Specific GE/FE port link down. | |
| 1.3.6.1.4.1.5833.800.8.2 | NodeiswAlmTraps | |||
| 1.3.6.1.4.1.5833.800.8.2.1 | NodeiswAlarmSystemTraps | |||
| 1.3.6.1.4.1.5833.800.8.2.1.1 | NotificationiswTrapAlmPowerFeed | current | System power alarm, could be Power Feed 1 or Feed 2 has no power input. | |
| 1.3.6.1.4.1.5833.800.8.2.1.2 | NotificationiswTrapAlmTempAbove | current | System ambient temperature exceeds the alarm threshold. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.2.1.3 | NotificationiswTrapAlmTempBelow | current | System ambient temperature lower than the alarm threshold. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.2.1.4 | NotificationiswTrapAlmIngressBwAbove | current | Port bandwidth of Ingress direction in any port exceeds the alarm threshold. ifIndex is port number. | |
| 1.3.6.1.4.1.5833.800.8.2.1.5 | NotificationiswTrapAlmEgressBwAbove | current | Port bandwidth of Egress direction in any port exceeds the alarm threshold. ifIndex is port number. | |
| 1.3.6.1.4.1.5833.800.8.2.1.6 | NotificationiswTrapAlmCpuHigh | current | CPU utilization exceeds the alarm threshold value. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.2.1.7 | NotificationiswTrapAlmMemHigh | current | Memory usage of whole system exceeds the alarm threshold value. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.2.1.8 | NotificationiswTrapAlmPoeUsageHigh | current | Totally PoE Power output of whole system exceeds the alarm threshold value. ifIndex would be 0. | |
| 1.3.6.1.4.1.5833.800.8.2.2 | NodeiswAlarmPortTraps | |||
| 1.3.6.1.4.1.5833.800.8.2.2.1 | NotificationiswTrapAlmFE-1PortLinkDown | current | FastEthernet port 1 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.2 | NotificationiswTrapAlmFE-2PortLinkDown | current | FastEthernet port 2 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.3 | NotificationiswTrapAlmFE-3PortLinkDown | current | FastEthernet port 3 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.4 | NotificationiswTrapAlmFE-4PortLinkDown | current | FastEthernet port 4 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.5 | NotificationiswTrapAlmFE-5PortLinkDown | current | FastEthernet port 5 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.6 | NotificationiswTrapAlmFE-6PortLinkDown | current | FastEthernet port 6 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.7 | NotificationiswTrapAlmFE-7PortLinkDown | current | FastEthernet port 7 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.8 | NotificationiswTrapAlmFE-8PortLinkDown | current | FastEthernet port 8 link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.9 | NotificationiswTrapAlmGE-1PortLinkDown | current | GE-1 port link down. This trap is sent if Alarm Entry is unmasked. | |
| 1.3.6.1.4.1.5833.800.8.2.2.10 | NotificationiswTrapAlmGE-2PortLinkDown | current | GE-2 port link down. This trap is sent if Alarm Entry is unmasked. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IswAlarmLevel | INTEGER { iswAlm-minor(1), iswAlm-major(2) } | current | The alarm level identifier number. |
| IswAlarmMask | INTEGER { iswAlm-Mask(0), iswAlm-UnMask(1) } | current | The alarm level identifier number. |
| IswAlarmState | INTEGER { iswAlm-Set(1), iswAlm-Cleared(2) } | current | The alarm level identifier number. |
| IswAlarmType | INTEGER { iswAlarmFE-1PortLinkDown(101), iswAlarmFE-2PortLinkDown(102), iswAlarmFE-3PortLinkDown(103), iswAlarmFE-4PortLinkDown(104), iswAlarmFE-5PortLinkDown(105), iswAlarmFE-6PortLinkDown(106), iswAlarmFE-7PortLinkDown(107), iswAlarmFE-8PortLinkDown(108), iswAlarmGE-1PortLinkDown(109), iswAlarmGE-2PortLinkDown(110), iswAlarmPowerAlarm(151), iswAlarmTempAboveAlarm(201), iswAlarmTempBelowAlarm(202), iswAlarmIngressBwAboveAlarm(203), iswAlarmEgressBwAboveAlarm(204), iswAlarmCpuHighAlarm(205), iswAlarmMemHighAlarm(206), iswAlarmPoeUsageHighAlarm(207) } | current | The alarm type identifier number. |
| IswEntIndex | INTEGER { system(1), main-card(2), gbe-card(3) } | current | The Gigabit Ethernet Port. |
| IswEventType | INTEGER { iswSystemRestart(1), iswSystemDownloadBegin(2), iswSystemDownloadSuccess(3), iswSystemDownloadFail(4), iswSystemProvisiondataExport(5), iswSystemProvisiondataImport(6), iswSystemProvisiondataSetdefault(7), iswSystemAlarmLogClear(9), iswSystemEventLogClear(10), iswSystemRTCDateTimeChange(11), iswSystemAlarmProfileChagne(14), iswSystemFTPReceptionStart(17), iswSystemFTPReceptionComplete(18), iswSystemFTPReceptionIncomplete(19), iswSystemSNTPTimeZoneChange(21), iswSystemSNTPProvisionChanged(23), iswSystemDatabaseSavingFailed(25), iswSystemUserLoginSuccess(26), iswSystemUserLoginFailure(27), iswSystemUserLogoutSystem(28), iswSystemUserTimeoutLogout(29), iswPortLinkup(501), iswPortLinkdown(502), iswSystemAlarmLEDOn(601), iswSystemAlarmLEDOff(602) } | current | The event type identifier number. |
| IswGbeAndTrunkPortsIndex | INTEGER { iswFEPort-1(1), iswFEPort-2(2), iswFEPort-3(3), iswFEPort-4(4), iswFEPort-5(5), iswFEPort-6(6), iswFEPort-7(7), iswFEPort-8(8), iswGEPort-1(9), iswGEPort-2(10), iswTrunk-1(29), iswTrunk-2(30) } | current | The Gigabit Ethernet Port and Trunk Port. |
| IswGbeIndex | INTEGER { iswFEPort-1(1), iswFEPort-2(2), iswFEPort-3(3), iswFEPort-4(4), iswFEPort-5(5), iswFEPort-6(6), iswFEPort-7(7), iswFEPort-8(8), iswGEPort-1(9), iswGEPort-2(10) } | current | The Fast / Gigabit Ethernet Port. |
| IswPFIndex | INTEGER { none(0), iswProfile-1(1), iswProfile-2(2), iswProfile-3(3), iswProfile-4(4), iswProfile-5(5), iswProfile-6(6), iswProfile-7(7) } | current | The Profile Index. |