INFINERA-ENTITY-DLM-MIB
17 objects
This MIB is modeling for DLM equipment table.
Imported Objects
| ENTITY-MIB | entLPPhysicalIndex |
| INFINERA-REG-MIB | equipment |
| INFINERA-TC-MIB | InfnEqptType InfnOperatingMode |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.1.4 | IdentitydlmMIB | This MIB is modeling for DLM equipment table. | ||
| 1.3.6.1.4.1.21296.2.2.2.1.4.1 | TabledlmTable | not-accessible | current | This table contains all DLM modules that are currently present in a network element. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1 | RowdlmEntry | not-accessible | current | A row in the DLM table. Each row in the table is identified with a unique entPhysicalIndexID. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.1 | ColumndlmMoId | read-create | current | This is the primary Key of the objects e.g 1-A-3 |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.2 | ColumndlmProvEqptType | read-create | current | The configured DLM type. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.3 | ColumndlmPicDspVer | read-only | current | The hardware version of the PIC on the DLM. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.4 | ColumndlmOperatingMode | read-create | current | This objects controls the operating mode for XLM and DLM in Gen1 and Gen2 modes. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.5 | ColumndlmAvailableTunableOcgNumbers | read-only | current | This objects represents the available ocgs in bits being set. For example if cards available OCG on AXLM-T4-1-C4 are 1, 9, 2and 10 then value will be 0x303, i.… |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.6 | ColumndlmProvisionedOcgNumber | read-create | current | This represents the OCG number for which tunable line module will be tuned. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.7 | ColumndlmInstalledOcgNumber | read-create | current | This represents the OCG number for which the line module is tuned. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.8 | ColumndlmRowStatus | read-create | current | The row status of this DLM entry. Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex t… |
| 1.3.6.1.4.1.21296.2.2.2.1.4.1.1.9 | ColumndlmOpticsFirmwareVer | read-only | current | Optics Firmware Version of LM80. |
| 1.3.6.1.4.1.21296.2.2.2.1.4.3 | NodedlmConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.1.4.3.1 | NodedlmCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.1.4.3.1.1 | CompliancedlmCompliance | current | ||
| 1.3.6.1.4.1.21296.2.2.2.1.4.3.2 | NodedlmGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.1.4.3.2.1 | GroupdlmGroup | current |