INFINERA-ENTITY-EQPT-MIB
37 objects
This is definition of nfinera equipment mibs.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.1.9.1 | IdentityeqptMIB | This is definition of nfinera equipment mibs. | ||
| 1.3.6.1.4.1.21296.2.2.1.9.1.1 | TableeqptTable | not-accessible | current | A list of Eqpt entries. Each entry is uniquely identified by the value of entPhysicalIndex. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1 | RoweqptEntry | not-accessible | current | An Eqpt entry containing information pertaining to Infinera equipment. Entries will exist in this table for all entPhysicalEntries that correspond to Infinera … |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.1 | ColumneqptMoId | read-only | current | MO identifier for this object |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.2 | ColumneqptLabel | read-write | current | An identifier to identify the managed object. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.3 | ColumneqptAdministrativeState | read-write | current | Parameter that enables to allow or prohibit the managed object from providing its designated service. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.4 | ColumneqptOperationalState | read-only | current | It describes the actual state of the managed object in terms of its ability to provide service. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.5 | ColumneqptAvailabilityState | read-only | current | It describes the actual state of the managed object in terms of its ability to provide service. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.6 | ColumneqptAlarmReportControl | read-write | current | Enable or disable the alarm reporting by the managed object. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.7 | ColumneqptOpStateQualifierList | read-only | current | It describes the secondry state of the managed object. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.8 | ColumneqptAlarmInhibitState | read-only | current | Indicates the alarm reporting status of the managed object. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.9 | ColumneqptProvEqptType | read-only | current | The configured equipment type. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.10 | ColumneqptInstalledEqptType | read-only | current | The equipment type installed in the slot. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.11 | ColumneqptBaseCircuitPackType | read-only | current | Base Circuit Pack Type. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.12 | ColumneqptCLEI | read-only | current | The Common Language Equipment Identifier of the equipment. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.13 | ColumneqptSAFpgaUpgradePending | read-only | current | Service affecting Fpga upgrade pending indication. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.14 | ColumneqptSAFpgaUpgradeFlag | read-only | current | Service affecting Fpga upgrade control. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.15 | ColumneqptEqptMaxPowerDraw | read-only | current | Parameter denoting the estimated power drawn by the FRU. This varies depending on the type of the FRU. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.16 | ColumneqptLastRebootTime | read-only | current | The last time this equipment booted, expressed in the format YYYY-MM-DD<Space>hh:mm:ss. This value will be a zero-length string if the boot time is unknown or … |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.17 | ColumneqptLastRebootReason | read-only | current | The reason which caused the last circuit pack reboot. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.18 | ColumneqptInletTemp | read-only | current | The inlet temperature in degree Celsius. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.19 | ColumneqptOutletTemp | read-only | current | The outlet temperature in degree Celsius. |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.20 | ColumneqptPartNumber | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.21 | ColumneqptSerialNumber | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.22 | ColumneqptManufacturedDate | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.23 | ColumneqptVendorId | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.24 | ColumneqptHardwareVersion | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.25 | ColumneqptFirmwareVersion | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.26 | ColumneqptPON | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.27 | ColumneqptUniversalSlotUsage | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.28 | ColumneqptFruInsertionDate | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.1.1.29 | ColumneqptRedundancyStatus | read-only | current | Describes the redundancy state on controller card |
| 1.3.6.1.4.1.21296.2.2.1.9.1.3 | NodeeqptConformance | |||
| 1.3.6.1.4.1.21296.2.2.1.9.1.3.1 | NodeeqptCompliances | |||
| 1.3.6.1.4.1.21296.2.2.1.9.1.3.1.1 | ComplianceeqptCompliance | current | Describes the requirements for conformance to the EQPT-MIB. | |
| 1.3.6.1.4.1.21296.2.2.1.9.1.3.2 | NodeeqptGroups | |||
| 1.3.6.1.4.1.21296.2.2.1.9.1.3.2.1 | GroupeqptGroup | current | A collection of objects for managing the eqpt |