INFINERA-ENTITY-OAM-MIB
20 objects
No module-level DESCRIPTION found.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| INFINERA-REG-MIB | equipment |
| INFINERA-TC-MIB | FloatTenths InfnEqptType InfnOAOperatingMode |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.1.11 | IdentityoamMIB | |||
| 1.3.6.1.4.1.21296.2.2.2.1.11.1 | TableoamTable | not-accessible | current | A list of OAM entries. Each entry is uniquely identified by the value of entPhysicalIndex. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1 | RowoamEntry | not-accessible | current | A OAM entry containing information pertaining to Infinera OAM modules. Entries will exist in this table for entPhysicalEntries of type OAM. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.1 | ColumnoamMoId | read-create | current | Object identifier. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.2 | ColumnoamProvisonedType | read-create | current | The configured OAM type. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.3 | ColumnoamRxAmpDeviceSetpoint | read-only | current | Current gain value for DAMP. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.4 | ColumnoamRxAmpDeviceTarget | read-only | current | Target gain value for DAMP. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.5 | ColumnoamRxLastAmpDeviceCommitTs | read-only | current | The last gain adjusted time by DAMP protocol. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.6 | ColumnoamLaunchPowerOffset | read-create | current | The OAM launch power will be adjusted by this value. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.7 | ColumnoamRxDampSeqNum | read-only | current | Current DAMP sequence number. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.8 | ColumnoamTilt | read-create | current | This attribute is an offset to the gain tilt of the BMM/OAM/ORM - without any offset applied (offset of 0dB), the gain tilt of the BMM/OAM is 1dB. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.9 | ColumnoamOperatingMode | read-create | current | The OAM in mode at which is is operating. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.10 | ColumnoamGain | read-create | current | If oamOperatingMode is set to slteMode1 then user can input the required gain for rx EDFA gain. |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.11 | ColumnoamRowStatus | read-create | current | The row status of this OAM entry. Because rows in this table are indexed by entPhysicalIndex, to create a new row one must choose a value of entPhysicalIndex t… |
| 1.3.6.1.4.1.21296.2.2.2.1.11.1.1.12 | ColumnoamCBandSoakCapableFW | read-only | current | |
| 1.3.6.1.4.1.21296.2.2.2.1.11.3 | NodeoamConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.1.11.3.1 | NodeoamCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.1.11.3.1.1 | ComplianceoamCompliance | current | Describes the requirements for conformance to the OAM-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.1.11.3.2 | NodeoamGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.1.11.3.2.1 | GroupoamGroup | current | A collection of objects for managing a OAM module |