INFINERA-PM-SCHCTP-MIB
45 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifIndex |
| INFINERA-REG-MIB | perfMon |
| INFINERA-TC-MIB | FloatArbitraryPrecision FloatHundredths |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.21296.2.2.2.3.38 | IdentityschCtpPmMIB | |||
| 1.3.6.1.4.1.21296.2.2.2.3.38.1 | TableschCtpPmRealTable | not-accessible | current | A list of SchCtpPmReal entries. Each entry is uniquely identified by the value of ifIndex. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1 | RowschCtpPmRealEntry | not-accessible | current | A SchCtp entry containing real-time performance information pertaining to Infinera SCHCTP interfaces. This table is a subclass of IfCommon. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.1 | ColumnschCtpPmRealChanSchOpt | read-only | current | Total SCH optical power leaving. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.2 | ColumnschCtpPmRealPmd | read-only | current | Pmd |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.3 | ColumnschCtpPmRealSoPmd | read-only | current | SoPmd |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.4 | ColumnschCtpPmRealSchOpt | read-only | current | SchOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.5 | ColumnschCtpPmRealSchEstimatedSpanOpt | read-only | current | SchEstimatedSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.6 | ColumnschCtpPmRealSchTargetSpanOpt | read-only | current | SchTargetSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.7 | ColumnschCtpPmRealSchOpr | read-only | current | SchOpr |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.8 | ColumnschCtpPmRealLastPollTimeStampOpt | read-only | current | LastPollTimeStampOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.1.1.9 | ColumnschCtpPmRealLastPollTimeStampOpr | read-only | current | LastPollTimeStampOpr |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2 | TableschCtpPmTable | not-accessible | current | A list of SchCtpPm entries. Each entry is uniquely identified by the value of ifIndex. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1 | RowschCtpPmEntry | not-accessible | current | A SchCtp entry containing historical performance information pertaining to Infinera LM SCH CTP interfaces. This table is a subclass of IfCommon. Entries will e… |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.1 | ColumnschCtpPmTimestamp | not-accessible | current | End Time stamp for this interval. If this time is later than the current time,then the data for this bucket is currently being collected. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.2 | ColumnschCtpPmSampleDuration | not-accessible | current | The duration of this sample. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.3 | ColumnschCtpPmValidity | read-only | current | Flag indicating if data was valid for the entire interval |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.4 | ColumnschCtpPmChanSchOptMin | read-only | current | Minimum SCH optical power. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.5 | ColumnschCtpPmChanSchOptMax | read-only | current | Maximum SCH optical power. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.6 | ColumnschCtpPmChanSchOptAve | read-only | current | Average SCH optical power. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.7 | ColumnschCtpPmPmdMin | read-only | current | Minimum Pmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.8 | ColumnschCtpPmPmdMax | read-only | current | Maximum Pmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.9 | ColumnschCtpPmPmdAve | read-only | current | Average Pmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.10 | ColumnschCtpPmSoPmdMin | read-only | current | Minimum SoPmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.11 | ColumnschCtpPmSoPmdMax | read-only | current | Maximum SoPmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.12 | ColumnschCtpPmSoPmdAve | read-only | current | Average SoPmd. |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.13 | ColumnschCtpPmSchOptMin | read-only | current | Minimum SchOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.14 | ColumnschCtpPmSchOptMax | read-only | current | Maximum SchOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.15 | ColumnschCtpPmSchOptAve | read-only | current | Average SchOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.16 | ColumnschCtpPmSchEstimatedSpanOptMin | read-only | current | Minimum SchEstimatedSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.17 | ColumnschCtpPmSchEstimatedSpanOptMax | read-only | current | Maximum SchEstimatedSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.18 | ColumnschCtpPmSchEstimatedSpanOptAve | read-only | current | Average SchEstimatedSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.19 | ColumnschCtpPmSchTargetSpanOptMin | read-only | current | Minimum SchTargetSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.20 | ColumnschCtpPmSchTargetSpanOptMax | read-only | current | Maximum SchTargetSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.21 | ColumnschCtpPmSchTargetSpanOptAve | read-only | current | Average SchTargetSpanOpt |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.22 | ColumnschCtpPmSchOprMin | read-only | current | Minimum SchOpr |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.23 | ColumnschCtpPmSchOprMax | read-only | current | Maximum SchOpr |
| 1.3.6.1.4.1.21296.2.2.2.3.38.2.1.24 | ColumnschCtpPmSchOprAve | read-only | current | Average SchOpr |
| 1.3.6.1.4.1.21296.2.2.2.3.38.3 | NodeschCtpPmConformance | |||
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.1 | NodeschCtpPmCompliances | |||
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.1.1 | ComplianceschCtpPmCompliance | current | Describes the requirements for conformance to the SCHCTP-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.1.2 | ComplianceschCtpPmRealCompliance | current | Describes the requirements for conformance to the SchCtpPmReal-MIB | |
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.2 | NodeschCtpPmGroups | |||
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.2.1 | GroupschCtpPmGroup | current | A collection of objects for reading the historical performance of the SchCtp. | |
| 1.3.6.1.4.1.21296.2.2.2.3.38.3.2.2 | GroupschCtpPmRealGroup | current | A collection of objects for reading the real-time performance of the SchCtp. |