MIB Viewer
MIB Viewer Desktop New

INFINERA-TP-DCHCTP-MIB

36 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.21296.2.2.2.2.18IdentitydchCtpMIB
1.3.6.1.4.1.21296.2.2.2.2.18.1TabledchCtpTablenot-accessiblecurrentA list of DchCtp entries. The number of entries is give by value of MOId.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1RowdchCtpEntrynot-accessiblecurrentA DchCtp entry containing all the information pertaining to Infinera DchCtp.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.1ColumndchCtpTribPrbsGenModeread-writecurrentFlag which enables the generation of PRBS data on the transmit side.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.2ColumndchCtpTribPrbsMonModeread-writecurrentFlag which enables the monitoring of bit errors.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.3ColumndchCtpSupportingCircuitIdListread-onlycurrentAn unordered list of the CircuitId's associated with DchCtp. This string contains the string representation of each supporting CircuitId, separated by a ' ' (s…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.4ColumndchCtpLoopbackread-writecurrentFlag to enable the loopback.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.5ColumndchCtpConfiguredServiceTyperead-onlycurrentThe configured service type.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.6ColumndchCtpExpectedDtsTTIread-writecurrentThe expected Dts trail trace identifier.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.7ColumndchCtpDtsTTIMismatchReportingread-writecurrentFlag that indicates if TTI alarm should be reported or not.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.8ColumndchCtpTxDtsTTIread-writecurrentThe transmitted Dts trail trace identifier.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.9ColumndchCtpRxDtsTTIread-onlycurrentThe received Dts trail trace identifier.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.10ColumndchCtpPreFecThresholdOrderread-writecurrentPre-FEC BER threshold.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.11ColumndchCtpDataPlaneTransparencyread-writecurrentThis attribute captures whether or not the data traffic arriving via this DchCTP is transported transparently by the receiving network element.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.12ColumndchCtpSignalDegradeReportingControlread-writecurrentControls whether or not the signal degrade condition is reported.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.13ColumndchCtpDtsFecSupportread-writecurrentThis attribute controls whether or not the High Gain Infinera FEC is enabled for this DTS.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.14ColumndchCtpPreFecThresholdMantissaread-writecurrentThe mantissa for the BER threshold used to declare PRE-FEC-BER-SD. This parameter, together with the attribute preFecThreshold-Order, completely specifies the …
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.15ColumndchCtpDtsCv15MinutesTceread-writecurrentCount of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM- CV-S current re…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.16ColumndchCtpDtsEs15MinutesTceread-writecurrentCount of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AISP, DTPLOF or POST FEC …
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.17ColumndchCtpDtsSes15MinutesTceread-writecurrentCount of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DT…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.18ColumndchCtpDtsCvDayTceread-writecurrentCount of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM-CV-S current reg…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.19ColumndchCtpDtsEsDayTceread-writecurrentCount of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P, DTPLOF or POST FEC…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.20ColumndchCtpDtsSesDayTceread-writecurrentCount of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DT…
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.21ColumndchCtpDtsCv15MinutesTceReportingread-writecurrentFlag that enables the reporting of DtsCv15MinutesTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.22ColumndchCtpDtsEs15MinutesTceReportingread-writecurrentFlag that enables the reporting of DtsEs15MinutesTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.23ColumndchCtpDtsSes15MinutesTceReportingread-writecurrentFlag that enables the reporting of DtsSes15MinutesTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.24ColumndchCtpDtsCvDayTceReportingread-writecurrentFlag that enables the reporting of DtsCvDayTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.25ColumndchCtpDtsEsDayTceReportingread-writecurrentFlag that enables the reporting of DtsEsDayTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.26ColumndchCtpDtsSesDayTceReportingread-writecurrentFlag that enables the reporting of DtsSesDayTce crossing.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.27ColumndchCtpPmHistStatsEnableread-writecurrentThis objects control the historical PM collection.
1.3.6.1.4.1.21296.2.2.2.2.18.1.1.28ColumndchCtpConnectivityVerificationread-writecurrentThis objects control the reporting of connectivity verification alarm.
1.3.6.1.4.1.21296.2.2.2.2.18.3NodedchCtpConformance
1.3.6.1.4.1.21296.2.2.2.2.18.3.1NodedchCtpCompliances
1.3.6.1.4.1.21296.2.2.2.2.18.3.1.1CompliancedchCtpCompliancecurrentDescribes the requirements for conformance to the DCHCTP-MIB
1.3.6.1.4.1.21296.2.2.2.2.18.3.2NodedchCtpGroups
1.3.6.1.4.1.21296.2.2.2.2.18.3.2.1GroupdchCtpGroupcurrentA collection of objects for managing the dchCtp